Contents

Sennheiser CX 350BT SEBT1 Instruction Manual PDF

1 of 24
1 of 24

Summary of Content for Sennheiser CX 350BT SEBT1 Instruction Manual PDF

CX 350BT In-Ear Wireless Model: SEBT1

Instruction manual

Use the search function, the navigation (left) or the following links: Start Product overview Getting started Using the headphones FAQ/If a problem occurs ... Specifications

Sennheiser electronic GmbH & Co. KG Am Labor 1 30900 Wedemark Germany www.sennheiser.com

Version: 01/21 A02

Important safety instructions

2 | CX 350BT

Important safety instructions

Read this instruction manual carefully and completely before using the product.

Always include this instruction manual when passing the product on to third parties.

Do not use the product if it is obviously defective or makes loud, unusual (whistling or beeping) noise.

Only use the product in environments where Bluetooth wireless transmission is permitted.

Preventing damage to health and accidents Protect your hearing from high volume levels. Permanent

hearing damage may occur when headphones are used at high volume levels for long periods of time. Sennheiser headphones sound exceptionally good at low and medium volume levels.

The product generates stronger permanent magnetic fields that could cause interference with cardiac pace- makers, implanted defibrillators (ICDs) and other implants. Always maintain a distance of at least 3.94"/10 cm bet- ween the product component containing the magnet and the car- diac pacemaker, implanted defibrillator, or other implant.

Do not insert the earphones too deep into your ears and never insert them without ear adapters. Always remove the earphones slowly and carefully from your ears.

Keep the product, accessories and packaging parts out of reach of children and pets to prevent accidents. Swallowing and cho- king hazard.

Do not use the product in an environment that requires your spe- cial attention (e.g. in traffic or when performing skilled jobs).

Preventing damage to the product and malfunctions Always keep the product dry and do not expose it to extreme tem-

peratures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation.

Use only attachments/accessories/spare parts supplied or recommended by Sennheiser.

Clean the product only with a soft, dry cloth.

Safety instructions for Lithium rechargeable batteries

WARNING If abused or misused, the rechargeable batteries may leak. In extreme cases, they may even present a risk of: explosion, fire development, heat generation, smoke or gas development.

Important safety instructions

CX 350BT | 3

Notes on data collection and processing and on firmware updates This product stores individual settings such as the volume, the sound profiles and the Bluetooth connection data of paired devices. This data is required for the operation of the product and is not trans- ferred to Sennheiser or companies commissioned by Sennheiser and is not processed. Using the Sennheiser Smart Control app, you can update the firm- ware of the product for free via an Internet connection. If the device on which the app is installed is connected to the Internet, the follow- ing data is automatically transferred to and processed by Sennheiser servers in order to provide and transfer suitable firmware updates: hardware identifier, hardware revision number, firmware version of the product, operating system type (Android, iOS) and version, ver- sion of the app. The data will only be used as specified and will not be stored permanently. If you do not want this data to be transferred and processed, do not connect to the Internet.

Intended use/Liability These headphones have been designed as an accessory for Blue- tooth compliant devices. They are intended for wireless audio com- munication such as music playback and phone calls via Bluetooth wireless technology. It is considered improper use when the product is used for any appli- cation not named in the corresponding product documentation. Sennheiser does not accept liability for damage arising from misuse or improper use of this product and its attachments/accessories. Sennheiser is not liable for damages to USB devices that are not con- sistent with the USB specifications. Sennheiser is not liable for damages resulting from the loss of connection due to flat or overa- ged rechargeable batteries or exceeding the Bluetooth transmission range. Before putting into operation, please observe the respective coun- try-specific regulations.

Only use rechargeable batteries and chargers recommended by Sennheiser.

Charge products with built-in rechargeable batteries at ambient temperatures between 10 and 40C/50 and 104F. Do not heat above 60 C/140 F, e.g. do not expose to sunlight or throw into fire.

When not using the product for extended periods of time, charge its built-in rechargeable battery regularly (about every 3 months). Switch rechargeable battery-powered products off after use.

Dispose of defective products with built-in rechargeable batteries at special collection points or return them to your specialist dealer.

Package contents

4 | CX 350BT

Package contents

Online you can find: this detailed instruction manual and additional information

(www.sennheiser.com/download) the Sennheiser Smart Control app for getting to know the head-

phones (www.sennheiser.com/smartcontrol)

Headphones

USB charging cable with USB-C and USB-A connector

Silicone ear adapter set in the following sizes: XS, S, M (pre-mounted upon delivery) and L

Quick guide

Safety guide

You can find a list of accessories on the CX 350BT product page at www.sennheiser.com. Contact your local Sennheiser partner: www.sennheiser.com > Service & Support.

Product overview

CX 350BT | 5

Product overview CX 350BT Model: SEBT1

Earphones

Voice assistant button

LED

Volume + button (volume up)

Multi-function button

Volume - button (volume down)

USB-C socket for charging the rechargeable battery

Cover for USB-C socket

Microphone

*

ON OFF

PAIRING

MUSIC

TELEPHONE

7

M

1

4

3 2

5

Right R

Left L

7

5

9

8

6

Product overview

6 | CX 350BT

Overview of the LED indications of the headphones

Notes on voice prompts The headphones output voice prompts for the following functions.

LED Meaning; the headphones

lights up red are being charged

lights up blue are fully charged

flashes blue are switched on

flashes red-blue approx. 1 min

are in Bluetooth pairing mode

flashes blue Bluetooth pairing successful

flashes red Bluetooth pairing failed

flashes blue are connected to a device via Blue- tooth

pulses red approx. 3 sec

are not connected to a device via Bluetooth or the connection has been lost

flashes red rechargeable battery is almost empty

flashes red are switched off

If the LED does not light up immediately during charging, clean the charging socket and charge the headphones until the LED lights up again (> 9).

Voice prompt Meaning/headphones Power on are switched on Power off are switched off Device (1) (2) connected are connected to device 1 or 2 Lost connection are not connected via Bluetooth Pairing are in Bluetooth pairing mode Pairing successful Bluetooth pairing successful Pairing failed Bluetooth pairing failed Call rejected incoming call rejected Call ended call ended

Product overview

CX 350BT | 7

Mute on Microphone is muted, active call is put on hold

Mute off Microphone is reactivated Recharge headset Rechargeable battery is empty.

Recharge the headphones. Volume min volume set to minimum Volume max volume set to maximum

Voice prompt Meaning/headphones

Getting started

8 | CX 350BT

Getting started

1. Charging the rechargeable battery The headphones' rechargeable battery is not fully charged upon deli- very. Before using the headphones for the first time, charge the rechargeable battery for a complete charging cycle without inter- ruption (> 9).

2. Installing the Smart Control app on your smartphone The Sennheiser Smart Control app allows you to use all functions and settings of the headphones and to e.g. adjust the sound to your liking using the equalizer (> 12).

3. Connecting the headphones to a Bluetooth device Connect the headphones to your smartphone via Bluetooth (> 10).

4. Selecting suitable ear adapters for optimum fit of the headphones

The perceived sound quality and bass performance depends to a large extent on the correct fit of the headphones in the ear.

Test which ear adapter size gives you the best sound quality and the best wearing comfort.

You can choose between 4 different ear adapters in size XS, S, M and L.

The ear adapters must fit snugly in the ear canal and completely seal your ears (> 12).

USB-C USB-A

4s

Hold

XS S M L

M M

Using the headphones

CX 350BT | 9

Using the headphones

Information on the rechargeable battery and the charging process The headphones have a built-in rechargeable battery. A complete charging cycle takes approx. 2.5 hours. Before using the headphones for the first time, charge the rechargeable battery for a complete charging cycle without interruption. When the headphones are being charged, the LED lights up (> 6). When the battery charge drops to a critical level, a voice prompt asks you to recharge the headphones (Recharge headset). Sennheiser recommends using the supplied USB cable and a compa- tible standard USB power supply for charging the headphones.

Charging the headphones' rechargeable battery

1. Connect the USB-C connector of the USB cable to the USB-C socket of the headphones.

2. Connect the USB-A connector to a corresponding socket of a USB power source (to be ordered separately). Make sure that the USB power source is connected to the power supply system. The charging process of the headphones begins. The LED dis- plays the charge status:

LED Meaning flashes red Rechargeable battery is being charged

(charge level is very low) lights up red Rechargeable battery is being charged

(charge level approx. 50%) lights up purple

Rechargeable battery is being charged (charge level approx. 75%)

lights up blue Rechargeable battery is fully charged

USB-A

USB-C

2,5 HRS

Using the headphones

10 | CX 350BT

Connecting the headphones to a Bluetooth device To be able to use the Bluetooth wireless connection, you must regis- ter both devices (headphones and e.g. smartphone) via the device settings of your smartphone. This process is called pairing. If operation differs from the steps mentioned, also refer to the inst- ruction manual of the Bluetooth device you are using.

Information on the Bluetooth wireless connection The headphones are compatible with Bluetooth 5.0. If your audio source supports one of the following high-resolution audio encoding methods, music is automatically played in high audio quality: aptX, aptX LL or AAC. Otherwise the headphones will play your music in normal audio quality (SBC). Paired devices establish the Bluetooth wireless connection immedi- ately after switch-on and are ready for use. On switch-on, the headphones automatically try to connect to the last two connected Bluetooth devices. The headphones can save the connection profiles of up to eight Bluetooth devices with which they have been paired. If you pair the headphones with the ninth Bluetooth device, the saved connection profile of the least used Bluetooth device will be over- written. If you want to re-establish a connection with the overwritten Bluetooth device, you have to pair the headphones again.

If you switch on the headphones for the first time, they auto- matically switch to pairing mode.

Paired and connected Bluetooth device

Paired Bluetooth device (currently not connected)

Using the headphones

CX 350BT | 11

Pairing the headphones with a Bluetooth device 1. Switch the headphones on (> 13) and place them close to the

Bluetooth device (max. 20 cm).

2. Press and hold the multi-function button for 5 seconds until you hear the voice prompt Pairing. The LED flashes blue and red. The headphones are in pairing mode.

3. Activate Bluetooth on your Bluetooth device.

4. Via the menu of your Bluetooth device, start the search for new Bluetooth devices. All active Bluetooth devices in the proximity of your Bluetooth device are displayed.

5. From the list of found Bluetooth devices, select CX 350BT. If necessary, enter the default pin code 0000. If pairing was successful, you hear the voice prompts Pairing successful and Device (1) connected. The LED flashes blue 3x.

Disconnecting the headphones from a Bluetooth device Via the menu of your Bluetooth device, disconnect the connection

to the headphones. The headphones are disconnected from the Bluetooth device. You hear the voice prompt Lost connection. The headphones then search for other paired devices. If no device is found within 5 minutes, the headphones switch to idle mode.

If no connection is established within 5 minutes, pairing mode is terminated and the headphones switch to idle mode. If necessary, repeat the steps described above.

Pairing

1 2

3 4 5

< 20 cm

ON

Device (1) connected

Pairing successful3x

3x

ON

3s

Hold

5s

Hold

Menu Bluetooth on Bluetooth off

Menu Add Device

CX 350BT

Using the headphones

12 | CX 350BT

Installing the Smart Control app

To make full use of all the settings and functions of the headphones, you need to have the free Sennheiser Smart Control app installed on your smartphone. Download the app from the App Store or Google Play and install it on your smartphone. Alternatively, you can use your smartphone to scan the following QR code or to call up the following Internet site: www.sennheiser.com/smartcontrol

Connect your smartphone to the headphones via Bluetooth (> 10).

Start the Smart Control app.

Follow the instructions in the app.

Selecting suitable ear adapters for optimum fit of the headphones

The perceived sound quality and bass performance of the headpho- nes depends to a large extent on their correct fit in the ear.

Pull the ear adapter away from the in-ear sound tunnel.

Mount the new ear adapter to the in-ear sound tunnel. Ensure that it locks into place.

Test which ear adapter size gives you the best sound quality and the best wearing comfort.

You can choose between 4 different ear adapters in size XS, S, M and L. The ear adapters must fit snugly in the ear canal and completely seal your ears.

Sennheiser Smart Control

XS S

M L

Using the headphones

CX 350BT | 13

Inserting the earphones into the ears

Put the cable around your neck.

Assign the right earphone to your right ear and the left earphone to your left ear.

Press the earphones lightly into the ear canal.

Switching the headphones on

Press the multi-function button for 3 seconds. The headphones switch on. You hear the voice prompt Power on and the LED display flashes blue 3x. If a paired Bluetooth device is within the transmission range, you hear the voice prompt Device (1) connected. The LED flashes blue 3x.

If the earphones fit too loose in the ear canal and fall out easily:

Try larger ear adapters.

If you feel immediate pressure when wearing the earphones:

Try smaller ear adapters.

R

WARNING Danger of hearing damage due to high volume levels! Listening at high volume levels can lead to permanent hearing defects.

Before putting the headphones on, adjust the volume to a low level (> 15).

Do not continuously expose yourself to high volume levels.

Make sure that Bluetooth is already activated on your Blue- tooth device when switching on the headphones.

Power on

3x

3x

3s

Hold

ON

Device (1) connected

Using the headphones

14 | CX 350BT

Switching the headphones off

Press the multi-function button for 3 seconds. You hear the voice prompt Power off and the LED flashes red 3x.

Retrieving information on the battery charge status When the headphones are connected to your Bluetooth device, the battery charge status can be displayed on the screen of your smart- phone (depending on the device and operating system used). You can check the battery charge level of your headphones manually by pressing the volume - button 1x. You hear the voice prompt More than xx % battery left.

If Bluetooth is activated and the headphones cannot find a paired Bluetooth device within a few minutes, you hear the voice prompt Lost connection. The LED flashes red. The headphones switch to standby mode.

The headphones automatically switch to idle mode if no paired Bluetooth device can be found within 5 minutes. You can wake up the headphones from idle mode by pressing the multi-func- tion button for approx. 3 seconds.

Power off

3x

3s

Hold

OFF

Voice prompt Meaning Recharge headset The rechargeable battery is empty.

Recharge the rechargeable battery (> 9). In addition, the LED flashes red.

More than xx % battery left

The remaining battery charge is displayed as a percentage.

Using the headphones

CX 350BT | 15

Adjusting the volume

You can adjust the volume for music, voice prompts, and phone calls.

If you are playing music or are on a call: Press the volume + or - button to increase or reduce the volume.

When the maximum or minimum volume is reached, you hear the voice prompt Volume max or Volume min.

Using the voice assistant/voice dialing Press the voice assistant button 1x.

The available voice assistant of your smartphone is activated (*depending on the system or app used on your smartphone: Siri, Google Assistant, Baidu, ...).

Ask the voice assistant your question or make a request. To cancel the voice assistant/voice dialing:

Press the voice assistant button 1x.

WARNING Danger of hearing damage due to high volume levels! Listening at high volume levels can lead to permanent hearing defects. Before putting the headphones on and before toggling

between audio sources, adjust the volume to a low level.

Do not continuously expose yourself to high volume levels.

You can also adjust the volume using the connected Bluetooth device.

Using the headphones

16 | CX 350BT

Controlling music playback The music playback functions are only available when the headpho- nes and the device are connected via Bluetooth. Some smartphones or music players may not support all functions.

Playing/pausing music Press the multi-function button 1x.

Playing the next track Quickly press the multi-function 2x.

Playing the previous track Quickly press the multi-function 3x.

Making phone calls using the headphones The call functions are only available when the headphones and the smartphone are connected via Bluetooth. Some smartphones may not support all functions. The multi-function button allows you to control the call functions.

Making a call Dial the desired number on your smartphone.

If your smartphone does not automatically transfer the call to the headphones, select CX 350BT as the output device on your smartphone (see the instruction manual of your smartphone if necessary).

Multi-function button Function Press 1x Plays or pauses music

Multi-function button Function Press 2x Plays the next track in the playlist

Multi-function button Function Press 3x Plays the previous track in the playlist

Using the headphones

CX 350BT | 17

Accepting/rejecting/ending a call If your headphones are connected to a smartphone and you receive a call, you hear a ring tone in the headphones. If you are playing music when you receive a call, the music pauses until you end the call.

Muting the microphone To mute the headphones' microphone during a call:

Press the volume - button for 2 seconds. The microphone is muted. You hear the voice prompt Mute on.

To continue the call and reactivate the microphone:

Press the volume - button for 2 seconds. The microphone is reactivated. You hear the voice prompt Mute off.

Multi-function button Function

Press 1x Accepts a call

Press 1x Ends a call Voice prompt Call ended

Hold for 2 sec Rejects a call

Voice prompt Call rejected

Press 1x Accepts an incoming call and ends the active call

Press 2x Puts the active call on hold and accepts an incoming call

Press 2x Toggles between active call and call on hold

Mute on

Mute off

2s

Hold

Using the headphones

18 | CX 350BT

Automatically accepting a call You can automatically accept an incoming call when the headphones are switched on and connected. To be able to activate this function, you require the Smart Control app (> 12).

Adjusting sound effects/the equalizer To be able to use the sound effects/equalizer, you require the Smart Control app (> 12).

In the Smart Control app, select the desired sound effects via the equalizer. The sound effects are stored in your headphones. These sound settings are active even without using the Smart Control app, i.e. when you are using another Bluetooth device.

Care and maintenance

CX 350BT | 19

Care and maintenance

Clean the product only with a soft, dry cloth.

Replacing the ear adapters For reasons of hygiene, you should replace your ear adapters from time to time. Spare ear adapters are available from your Sennheiser partner.

1. Pull the ear adapter away from the in-ear sound tunnel.

2. Mount the new ear adapter to the in-ear sound tunnel. Ensure that it locks into place.

Information on the built-in rechargeable battery Sennheiser ensures and guarantees that the rechargeable battery performs at its optimum upon purchase of the product. If, upon pur- chase or within the warranty period, you suspect that the recharge- able battery is obviously defective or if a charging error/battery error is displayed (> 6), stop using the product, disconnect it from the power supply system and contact your Sennheiser partner. Your Sennheiser partner will coordinate the repair/replacement with you. Do not return a product with a defective battery to your dealer or Sennheiser partner unless requested to do so. To find a Sennheiser partner in your country, search at www.sennheiser.com/service- support.

CAUTION Liquids can damage the electronics of the product! Liquids entering the housing of the product can cause a short-circuit and damage the electronics. Keep all liquids far away from the product. Do not use any solvents or cleansing agents.

XS S

M L

Care and maintenance

20 | CX 350BT

Installing firmware updates Firmware updates can be downloaded free of charge from the Inter- net using the Sennheiser Smart Control app.

Connect the headphones to your smartphone and start the Smart Control app (> 12).

The app provides information on available firmware updates and guides you through the installation process.

FAQ/If a problem occurs ...

CX 350BT | 21

FAQ/If a problem occurs ... Current list of frequently asked questions (FAQ) Visit the CX 350BT product page at

www.sennheiser.com/download There you will find a current list of frequently asked questions (FAQ) and suggested solutions.

Your question has not been answered or the problem persists? If a problem occurs that is not listed in the FAQ section or if the pro- blem cannot be solved with the proposed solutions, please contact your Sennheiser partner for assistance. To find a Sennheiser partner in your country, search at www.sennheiser.com > Service & Support.

Leaving the Bluetooth transmission range Wireless calling and streaming are only possible in the Bluetooth transmission range of your smartphone. The transmission range lar- gely depends on environmental conditions such as wall thickness, wall composition etc. With a free line of sight, the transmission range of most smartphones and Bluetooth devices is up to 10 meters. If you, and therefore the headphones, leave the Bluetooth transmis- sion range of the smartphone, the sound quality deteriorates increa- singly until you hear the voice prompt Lost connection and the connection breaks down completely. If you immediately re-enter the Bluetooth transmission range, the connection is automatically re- established.

Deleting the Bluetooth pairing list of the headphones 1. Switch the headphones on (> 13).

2. Press and hold the multi-function button for 3 seconds. The headphones are in Bluetooth pairing mode. The LED flashes blue and red.

3. Press and hold the volume + button for approx. 3 seconds. The Bluetooth pairing list is deleted. You hear the voice prompt Pairing list cleared. The LED flashes blue and red 3x. The head- phones then stay in Bluetooth pairing mode.

Specifications

22 | CX 350BT

Specifications CX 350BT

Model: SEBT1

Bluetooth

Wearing style Bluetooth neckband cable

Ear coupling ear-canal

Frequency response 20 Hz to 20,000 Hz

Transducer principle dynamic

Transducer size 9.7 mm

Sound pressure level (SPL) 1073 dB (1 kHz/0 dBFS) measured according to IEC711

THD (1 kHz, 100 dB) < 0.5 % (1 kHz, 100 dB SPL)

Microphone principle MEMS

Microphone frequency response

100 Hz to 8,000 Hz

Microphone sensitivity (as per ITU-T P.79)

-42 dB V/Pa

Microphone pick-up pattern (speech audio)

omni-directional

Power supply built-in rechargeable lithium-polymer battery: 3.7 V , 100 mAh USB charging: 5 V , 100 mA max.

Operating time 10 hrs (music playback via SBC) with headphones' rechargeable battery; 240 hrs in standby mode

Charging time of rechargeable batteries

approx. 2.5 hrs

Temperature range operation: +5 C to +40 C 5 C charging: +10 C to +40 C 5 C storage: 20 C to +70 C

Relative humidity operation: 10 to 80%, non condensing storage: 10% to 90%

Magnetic field strength 1.2 mT

Weight approx. 14 g

Version Bluetooth 5.0 compatible, class 1, BLE

Transmission frequency 2,402 MHz to 2,480 MHz

Modulation GFSK, /4 DQPSK, 8DPSK

Profiles HSP, HFP, AVRCP, A2DP

Output power 10 mW (max)

Codec SBC, aptX, aptX LL, AAC

Manufacturer Declarations

CX 350BT | 23

Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.

In compliance with the following requirements General Product Safety Directive (2001/95/EC) Compliant to Sound Pressure Limits according to country speci-

fic requirements

EU declaration of conformity RoHS Directive (2011/65/EU) Hereby, Sennheiser electronic GmbH & Co. KG declares that the radio equipment type SEBT1 is in compliance with the Radio Equip- ment Directive (2014/53/EU). The full text of the EU declaration of conformity is available at the fol- lowing Internet address: www.sennheiser.com/download.

Notes on disposal Battery Directive (2006/66/EC & 2013/56/EU) WEEE Directive (2012/19/EU) The symbol of the crossed-out wheeled bin on the product, the bat- tery/rechargeable battery (if applicable) and/or the packaging indi- cates that these products must not be disposed of with normal household waste, but must be disposed of separately at the end of their operational lifetime. For packaging disposal, please observe the legal regulations on waste segregation applicable in your country. Further information on the recycling of theses products can be obtained from your municipal administration, from the municipal col- lection points, or from your Sennheiser partner. The separate collection of waste electrical and electronic equip- ment, batteries/rechargeable batteries (if applicable) and packa- gings is used to promote the reuse and recycling and to prevent negative effects caused by e.g. potentially hazardous substances contained in these products. Herewith you make an important cont- ribution to the protection of the environment and public health.

Trademarks Sennheiser is a registered trade mark of Sennheiser electronic GmbH & Co. KG. Apple, the Apple logo and Siri are trademarks of Apple Inc., registe- red in the U.S. and other countries. App Store is a service mark of Apple Inc. Android and Google play are registered trademarks of Google Inc. The Bluetooth word mark and logos are registered tra- demarks owned by Bluetooth SIG, Inc. and any use of such marks by Sennheiser electronic GmbH & Co. KG is under license. Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qual- comm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States an

Manualsnet FAQs

If you want to find out how the CX 350BT Sennheiser works, you can view and download the Sennheiser CX 350BT SEBT1 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sennheiser CX 350BT as well as other Sennheiser manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sennheiser CX 350BT. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sennheiser CX 350BT SEBT1 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sennheiser CX 350BT SEBT1 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sennheiser CX 350BT SEBT1 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sennheiser CX 350BT SEBT1 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sennheiser CX 350BT SEBT1 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.