Sennheiser MZD 8000 Instruction Manual PDF

1 of 14
1 of 14

Summary of Content for Sennheiser MZD 8000 Instruction Manual PDF

MZD 8000

Instruction manual

MZD 8000 Digitalmodul

MZD 8000_524157_0408_Sp6.book Seite 1 Dienstag, 21. Oktober 2008 7:58 19

1

Contents

Important safety information ........................................................ 2 The MZD 8000 ................................................................................... 3 Delivery includes ............................................................................... 4 Product overview .............................................................................. 4 Putting the digital module into operation .................................... 5

Connecting the microphone head and the cable ................... 5 Connecting the digital module to other devices .................... 6

Remote controlling the MZD 8000 ................................................. 7 If a problem occurs... ........................................................................ 8 Cleaning the MZD 8000 .................................................................... 9 Accessories ...................................................................................... 10 Specifications .................................................................................. 11 Manufacturer Declarations ............................................................ 12

Thank you for choosing Sennheiser!

We have designed this product to give you reliable operation over many years.

Over 60 years of accumulated expertise in the design and manufacture of high-quality electro-acoustic equipment have made Sennheiser a world-leading company in this field. Please take a few moments to read these instructions care- fully, as we want you to enjoy your new Sennheiser products quickly and to the fullest.

MZD 8000_US.fm Seite 1 Freitag, 31. Oktober 2008 11:16 11

2

Important safety information Please read this instruction manual carefully and completely

before using the device.

Make this instruction manual easily accessible to all users at all times.

Always include this instruction manual when passing the device on to third parties.

Never open the device. If devices are opened by customers in breach of this instruction, the warranty becomes null and void.

Water entering the housing of the device can cause a short- circuit and damage the electronics. Protect the device from wetness. Use only a slightly damp cloth to clean the device.

Do not expose the device to extreme temperatures.

Use the device with care and store it in a clean, dust-free environment.

Intended use of the device

Intended use includes:

having read this instruction manual, especially the chapter Important safety information on page 2,

using the device within the operating conditions and limita- tions described in this instruction manual.

Improper use means using the device other than as described in these instructions, or under operating conditions which differ from those described herein.

MZD 8000_US.fm Seite 2 Freitag, 31. Oktober 2008 11:16 11

3

The MZD 8000 The MZD 8000 digital module is an AES 42 A/D converter for all microphone heads of the MKH 8000 series.

The MZD 8000 has the following features:

Direct screw-on connection for the microphone heads of the MKH 8000 series

2-channel 24 bit A/D converter, dynamic range 115 dB

Studio grade preamplifier and converter

Sampling rate 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz

Integrated, remote-controllable DSP functions such as low-cut filter, attenuation and gain

Digital output in AES 42 format

External synchronization via AES 42, Mode 2

Color: Nextel black, non-reflecting, matching to the MKH 8000 series

MZD 8000_US.fm Seite 3 Freitag, 31. Oktober 2008 11:16 11

4

Delivery includes 1 MZD 8000 digital module

1 instruction manual

Product overview

Connection for microphone head

MZD 8000 digital module

XLR-3M socket

MZD 8000_US.fm Seite 4 Freitag, 31. Oktober 2008 11:16 11

5

Putting the digital module into operation

Connecting the microphone head and the cable

Screw an MKH 8000 series micro- phone head to the connection of the MZD 8000 as shown.

Note:

During operation, the MZD 8000s connection for the micro- phone head provides 48 V phantom power.

First screw on a microphone head before connecting an XLR cable.

To connect the cable:

Connect an XLR cable to the XLR-3M socket of the MZD 8000. The XLR connection locks into place with an audible click.

Long cables and multiple connectors in the cable path lead to a drop in the

CAUTION! Danger of damage to the device!

An incorrect supply voltage can cause damage to the power supply unit, the MZD 8000 and to subsequent devices.

Only connect the digital module to microphone inputs and power supply units which supply phantom power according to the AES 42 standard.

MZD 8000_US.fm Seite 5 Freitag, 31. Oktober 2008 11:16 11

6

supply voltage and a deterioration in jitter characteristics, espe- cially at high sampling rates.

If possible, use a continuous cable to connect the microphone and the subsequent device.

For longer cable distances, only use AES/EBU cable.

Connecting the digital module to other devices

The MZD 8000 digital module receives and transmits electrical signals according to the AES 42 standard (A).

If your mixing console does not support the AES 42 standard:

Use a format converter for conversion into other signals (B).

For additional information, visit the Internet at www.aes.org.

Synchronize all devices of the digital signal chain.

A

B

Control PC

Format converter MZD 8000

Recording device/ mixing console

MZD 8000_US.fm Seite 6 Freitag, 31. Oktober 2008 11:16 11

7

To connect the microphone:

Use a suitable cable to connect the MZD 8000 to the micro- phone input of a format converter or a mixing console.

When connecting the cables, make sure that the connectors are properly locked.

Remote controlling the MZD 8000 Via the AES 42 interface, you can make the following settings to the MZD 8000. Depending on the software or the format converter used, some settings are possibly not supported. For information on software updates, visit the Internet at www.sennheiser.com.

Parameter Settings

Sampling rate 44.1/48/88.2/96/176.4/192 kHz

Analog pre-attenuation 0, 6, 12, 18 dB

Digital high-pass filter Off/40/80/160 Hz

Digital signal gain from 0 to 63 dB (in steps of 1 dB)

Test signal Mono: 1 kHz sine Stereo: 1 kHz sine left and right (phase of right channel is advanced) Steps: Off/6 dBFS/48 dBFS/60 dBFS

Phase (polarity) 0, 180

Mute On/off

MZD 8000_US.fm Seite 7 Freitag, 31. Oktober 2008 11:16 11

8

If a problem occurs...

Problem Possible cause Solution

Microphone does not work

No supply voltage available.

Check the power supply unit/the corresponding software settings.

Microphone is not connected to an AES 42 input.

Check if the used input complies with the AES 42 standard.

Channel is muted. Deactivate Mute in the AES 42 remote control.

Audio signal is distorted

Excessive sound pressure of the audio signal to be recorded.

Increase the pick-up distance or activate the pre-attenuation in the AES 42 remote control.

Overload due to low-frequency interference.

Use a suitable windshield (accessory).

Activate the pre- attenuation in the AES 42 remote control.

No synchonization between MZD 8000 and receiver or no digital audio signal

Connected cable is incorrect.

Check the cable.

Connected cable is too long.

Use an AES/EBU cable.

Use a shorter cable.

Reduce the sampling rate.

Cable path with too many con- nectors.

Use a continuous cable.

MZD 8000_US.fm Seite 8 Freitag, 31. Oktober 2008 11:16 11

9

Cleaning the MZD 8000 Use a slightly damp cloth to clean the device from time to time.

Note:

Do not use any cleansing agents or solvents.

MZD 8000_US.fm Seite 9 Freitag, 31. Oktober 2008 11:16 11

10

Accessories Cat. No. Accessory

502094 MKHC 8020: Microphone head, omni-directional

502095 MKHC 8040: Microphone head, cardioid

502096 MKHC 8050: Microphone head, super-cardioid

502333 MZW 8000: Windshield, double-layered

502315 MZE 8015: Extension tube, 15 cm

502433 MZE 8030: Extension tube, 30 cm

502316 MZE 8060: Extension tube, 60 cm

502317 MZE 8120: Extension tube, 120 cm

502434 MZEF 8030: Vertical bar, 30 cm

502318 MZEF 8060: Vertical bar, 60 cm

502319 MZEF 8120: Vertical bar, 120 cm

502322 MZFS 8000: Floor stand

502323 MZG 8000: Swivel joint

502324 MZGE 8000: Bar connector, mono

502325 MZGE 8002: Bar connector, stereo

502326 MZL 8003: Remote cable, 3 m

502327 MZL 8010: Remote cable, 10 m

502328 MZQ 8000: Microphone clip

502329 MZQ 8001: Mini clip

502330 MZS 8000: Shock mount

502331 MZT 8000: Metal table stand

502332 MZT 8001: Table stand with acrylic base

502435 MZH 8000: Ceiling mount

MZD 8000_US.fm Seite 10 Freitag, 31. Oktober 2008 11:16 11

11

Specifications

Operating temperature range 10C to+60C

Power supply AES 42 phantom powering (DPP 10 V)

Current consumption max. 160 mA

Phantom power at microphone input

P 48

Input amplitude for 0.5 dBFS at 0 dB attenuation 1.1 Vrms (997 Hz sine)

Sensitivity (free field) (94 dBSPL) with MKH 8020 31 dBFS

Harmonic distorsion at 1 dBFS < 100 dB

Inherent self-noise (mono mode, 40 ohms) < 120 dBFS

Frequency response 10 Hz to 80 kHz

A/D conversion 24 bits/44.1to 192 kHz delta-sigma

Group delay 22/19/15 samples single /double /quad speed

Frequency accuracy, asynchronous operation (free-running)

25 ppm

Pull-in range synchronous operation min. 100 ppm

Diameter 19 mm

Length 96 mm

Weight approx. 65 g

MZD 8000_US.fm Seite 11 Freitag, 31. Oktober 2008 11:16 11

12

Manufacturer Declarations

Warranty

Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product.

For the current warranty conditions, please visit our web site at www.sennheiser.com or contact your Sennheiser partner.

CE Declaration of Conformity

Sennheiser electronic GmbH & Co. KG declare that this device is in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC.

The declaration is available at www.sennheiser.com.

WEEE Declaration

Please dispose of this product at the end of its operational lifetime by taking it to your local collection point or recycling center for such equipment.

In compliance with EMC EN 55103-1/-2

47 CFR 15subpart B

Industry Canada ICES_003

MZD 8000_US.fm Seite 12 Freitag, 31. Oktober 2008 11:16 11

Sennheiser electronic GmbH & Co. KG Printed in Germany Am Labor 1, 30900 Wedemark, Germany Publ. 04/08 www.sennheiser.com 524157/A01

MZD 8000_524157_0408_Sp6.book Seite 1 Dienstag, 21. Oktober 2008 7:58 19

<

Manualsnet FAQs

If you want to find out how the MZD 8000 Sennheiser works, you can view and download the Sennheiser MZD 8000 Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sennheiser MZD 8000 as well as other Sennheiser manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sennheiser MZD 8000. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sennheiser MZD 8000 Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sennheiser MZD 8000 Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sennheiser MZD 8000 Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sennheiser MZD 8000 Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sennheiser MZD 8000 Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.