Contents

Sencor SLE 22F62TCS Television User Manual PDF

1 of 54
1 of 54

Summary of Content for Sencor SLE 22F62TCS Television User Manual PDF

LED TV

SLE 22F62TCS SLE 2470TCS

USERS MANUAL

EN

EN 1

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Contents

PLEASE, READ THESE INSTRUCTIONS BEFORE STARTING TO OPERATE THE TELEVISION. STORE IT FOR LATER REFERENCE. NOTE DOWN THE MODEL NUMBER AND THE SERIAL NUMBER OF THE TV SET. LOOK AT THE LABEL ON THE BACK COVER AND PASS THE INFORMATION PROVIDED THERE TO YOUR DEALER IN CASE THAT YOU WOULD NEED SERVICING.

Contents 1. Important safety instructions ..................................................................................................................2 2. Assembling the stand ...............................................................................................................................8 3. TV Buttons ................................................................................................................................................. 9 4. Device ......................................................................................................................................................... 10

4.1. Button functions of the control panel.................................................................................................. 10 4.2. Connecting the TV connectors .............................................................................................................. 10

5. Remote controller ..................................................................................................................................... 11 6. Turn on first time ..................................................................................................................................... 13

6.1. Language selection .................................................................................................................................. 13 6.2. Country selection ...................................................................................................................................... 13 6.3. Automatic tuning .......................................................................................................................................14

7. Menu ........................................................................................................................................................... 16 7.1. Channel Menu satellite ........................................................................................................................ 16 7.2. Channel menu ATV/DTV .................................................................................................................... 19 7.3. Picture Menu .............................................................................................................................................22 7.4. Sound menu ............................................................................................................................................. 25 7.5. Time menu .................................................................................................................................................27 7.6. Lock menu ................................................................................................................................................ 29 7.7. Hotel mode ............................................................................................................................................... 32 7.8. Setup menu .............................................................................................................................................. 33 7.9. ATV Channel menu ................................................................................................................................. 38 7.10. Component Input / HDMI / AV menu ................................................................................................ 39

8. USB ............................................................................................................................................................40 8.1. Photo Menu ................................................................................................................................................41 8.2. Music menu ...............................................................................................................................................42 8.3. Movie menu .............................................................................................................................................. 43 8.4. Text Menu ...................................................................................................................................................44

9. Troubleshooting .......................................................................................................................................45 10. Technical specifications ......................................................................................................................... 48

10.1. Information sheet ....................................................................................................................................50

2 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Important safety instructions

1. Important safety instructions To be able to use this product properly, read this user's manual carefully and keep it for future reference. If you plan to give (sell) this device to a third person, include all documentation, including this manual, with the transaction.

The lightning symbol inside a triangle indicates the device has dangerous

voltage that may cause electric shock.

The exclamation point symbol inside an isosceles triangle indicates important

operation and repair instructions in the included

device documentation.

ATTENTION RISK OF ELECTRIC SHOCK DO

NOT OPEN! TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK SIDE). THE

INSIDE OF THE DEVICE DOES NOT CONTAIN PARTS THAT CAN BE REPAIRED BY THE USER. REFER TO AUTHORIZED REPAIR SHOPS FOR

REPAIR WORK.

General safety instructions Please read this manual carefully before using the device. Follow this manual and

the instructions inside. Heed all warnings. Follow all instructions. Use only the attachments and accessories specified by the manufacturer. OPEN FLAMES, FOR EXAMPLE A BURNING CANDLE, SHALL NOT BE PLACED

ON THE DEVICE. DO NOT PLACE HOT OBJECTS OR OBJECTS WITH AN OPEN FIRE ON THE DEVICE, FOR EXAMPLE CANDLES OR NIGHT LAMPS. HIGH TEMPERATURES MAY MELT PLASTIC COMPONENTS AND CAUSE FIRE.

Use the device in temperate climate. The manufacturer and vendor of the device are in not in any way liable for any direct

or indirect damages caused by not following the instructions for installation, setup, operation, maintenance and cleaning of the device mentioned in this manual.

Protect the device against impacts, falls, blows, shocks, vibration, moisture and dust. Prior to granting children consent to use the device, they shall become familiar with

the proper and safe use of the player, corresponding to their age. If the device has a headphone jack, do not use headphones set to maximum volume. Risk of hearing damage or loss.

Installation, control Install the device according to the instructions in the manual. Leave free space around the device, it is necessary for proper air circulation. It helps

to dissipate the heat generated by the operation of the device. By covering the air vents of the cabinet, you risk overheating and damage of the device. You must ensure that the air circulation will not be prevented by covering the air vents with e.g. newspaper, tablecloth, curtain, etc. Follow the installation instructions in the manual.

EN 3

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Important safety instructions

This device shall not be kept in a closed area, such as a library or shelf, provided sufficient ventilation cannot be provided or the manufacturer's instructions cannot be followed.

Do not place any objects into the air vents or any other holes. Risk of touching components with dangerous voltage or shorting parts that could cause fire or electric shock. Do not pour any liquids into the device. Do not install the device in direct sunlight, or close to heat sources, like radiators, heat exchangers, stoves or other appliances (including amplifiers) producing heat. High temperatures shorten the life of the electronic components of the device significantly. Do not use and do not leave the device near an open fire.

The device must not be exposed to dripping or running water and you must not place upon it objects filled with liquid, e.g. vases. Protect the device against becoming wet, sprayed on or poured on by any liquid, do not leave or install the device outdoors. Do not use the device outdoors. You risk electric shock or fire by not adhering to these instructions.

Do not use the device close to water. Handle the glass panels and cover of the device with care. The glass screen can

break on impact and cause serious injury. Make sure the power cord is not stepped on or compressed, especially near the plug

and point leading from the device or adapter. The power plug (adapter) is used to disconnect the system and must be easy to access.

Do not use a device with a damaged power cord or plug. If the power cord or plug is damaged, turn off the device, disconnect it from the power supply and contact your authorized repair shop. Only a professional can replace a damaged power cord or plug. Under no circumstances should you attempt to replace the power cord or plug yourself.

Do not attempt to bypass the safety function of the polarized plug. If the plug cannot be plugged into your socket, refer to an electrician to replace your obsolete socket. Before plugging the device into the socket make sure the voltage in your socket corresponds with the voltage on the label of the device or power adapter. If you are not sure of the type of power source you have in your home, refer to your vendor or local power company.

Before switching, make sure that all network connections are made properly and in accordance with the manufacturer's instructions. Switch the device off and unplug it from the socket before plugging in or changing the connection of the device.

Remember to always unplug the plug (adapter) from the socket before unplugging the power cord.

Plug the power cord into an independent socket. Do not overload wall sockets using extension cords or unified sockets. Risk of electric shock.

Hold the power cord by the plug and not by the cable when pulling out from the socket.

4 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Important safety instructions

Disconnect the power cord from the power outlet during thunderstorms, or when not in use for a longer period of time. Avoid carrying the device from a cool environment into a warm environment or vice versa, or operating the device in a moist environment. Air moisture may condense in some areas within the device case and may cause the device to become temporarily inoperable.

In this case, leave the device in a warm and well-ventilated area and leave for 12 hours until the moisture evaporates. The device can be normally used again. Be especially cautious when using the device for the first time during a cool season immediately after purchasing. Do not place the device on an unstable cart, stand, console or table. The device can fall and cause serious injury to children or adults or seriously damage the device and other objects. Only carts, stands or tables defined by the manufacturer or sold with the device shall be used. Any assembly work with the device shall be carried out according to the manufacturer's instructions and shall use assembly accessories recommended by the manufacturer.

Do not lean against the device, do not lean over or use the device as a step. Avoid quick movements. Make sure children do not play with the machine.

Be careful when moving the device when placed on a cart. Suddenly stopping, using excessive force and uneven surfaces may cause the cart holding the device to tip over.

Under no circumstances are the manufacturer or vendor liable for any direct or indirect damage caused by the failure to observe the instructions for installation, configuration, operation, treatment and cleaning of this device included within this manual.

Protect the device against impacts, falls, blows, shocks, vibration, moisture and dust. Do not expose the device to extreme temperatures or humidity.

Note: If the device is powered by an adapter, only use the AC adapter and power cord included with the device. Do not use defective sockets. Make sure the cord is properly plugged into the socket. If the cord is loose, an electric arc can cause fire. Refer to a qualified electrician to replace sockets.

Note: Plug the device into a properly grounded sockets with protective grounding pin only.

Note: If you plan to mount the device to a wall or ceiling, follow the instructions of the manufacturer and the user's manual for the given system.

EN 5

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Important safety instructions

Repairs and maintenance To avoid risks of electric shock or fire, do not remove the device from the case the

case does not contain components that the user could repair or adjust without the necessary equipment and qualification. Refer to a professional service centre if your device requires service.

In the event of any unusual occurrences during the use of the device, e.g. smelling the characteristic smell of burning insulation or even seeing a smoke, turn the device off immediately, disconnect the power supply and wait with continuing use of the device until you learn the result of its inspection by the service personnel.

Leave all service to qualified service personnel. Service is necessary when the device is damaged in any way, for example in case of damage to the power cord, spilling liquid on the device, intrusion of foreign objects into the device, when the device is exposed to rain or moisture, if the device does not function in the usual manner or if it fell.

When repairing or replacing a component of the device, make sure the repair technician used spare parts defined by the manufacturer to ensure the replaced components have the same features as the original. Unauthorized replacements can cause fire, electric shock or other risks.

Prior to cleaning, moving or other maintenance work, unplug the cord (adapter) from the socket.

Clean the device with a dry cloth only. Do not use gasoline, thinner or other solvents or abrasives, scouring pads, or sponges with scouring pads to clean the device.

Note: Do not throw the device into your common household waste. Respect laws and regulations when disposing of the machine.

Remote controller and battery Do not expose the remote controller or battery to direct sunlight, or close to heat

sources, like radiators, heat exchangers, stoves or other appliances (including amplifiers) producing heat. Do not use and do not leave the device near an open fire. Make sure the sensor is not exposed to intense light (e.g. sunlight) or fluorescent tube light, which could lower the efficiency and reliability of the remote controller.

The remote controller or battery must not be exposed to dripping or running water and objects filled with liquid, e.g. vases, shall not be placed on the device. Protect the remote controller against becoming wet, sprayed or poured on by any liquid. Do not use outdoors. Failure to respect these instructions can lead to the remote controller or battery becoming damaged.

Do not use the device close to water. The impact the battery disposal has on the environment shall be monitored carefully. Using the batteries incorrectly can result in leakage and corrosion. Follow the

following instructions to ensure proper remote control operation: Do not insert the batteries in the wrong direction. Do not charge, heat, open or short the batteries.

6 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Important safety instructions

Do not throw batteries into a fire. Do not leave dead batteries in the remote controller. Do not combine various types of batteries or old and new batteries. If you do not use the remote controller for a longer period of time, remove the

batteries to prevent damaging the remote controller by the batteries leaking out. If the remote controller does not work correctly or its range decreases, replace all

batteries with new ones. If there is an electrolyte leakage from the batteries, have the remote control

serviced by an authorized technician.

WARNING: To prevent risk of fire or electric shock, do not expose the device to rain or moisture.

WARNING: The batteries must not be exposed to excessive heat, for example sunlight, fire, etc.

This symbol indicates the device has double insulation between dangerous voltage from the network and user-accessible parts. Replace parts with identical spare parts only.

Do not leave a static image on the LCD panel for more than 2 hours. This may result in a damaged panel.

LCD screens are made using precision technology to provide even the finest image details. Several defective pixels can appear on the screen from time to time, indicated as red, blue, green or black dots (up to 0.001% of the total pixel count of the screen). This does not affect the characteristics and the effectiveness of your TV set.

EN 7

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Important safety instructions

Notes on the USB connector: USB memory devices require being connected directly into the device. To prevent

a failing or interrupting data transfer, do not use USB extension cable. Electrostatic discharge can cause the device to not function. In this case, the user must restart the device.

Before using a USB memory device, test that it communicates with the device and its read and write speed.

For maximum reading speed, we recommend to keep the disc space defragmented. Use file system FAT32, single partition, no protection.

If the reading/writing of the memory device is not smooth, it can lead to undesirable effects, such as interruption of the image (blocky image) or failure of whole frames, audio malfunctions, and in extreme cases, stopping of the operation. Unexpected behaviour of the connected storage device, or the presence of viruses and other malicious software can cause the device to stop the functioning with the need to restart it.

The USB connector is a standard type and cannot power a USB device with a high power consumption (e.g. hard drives). Use a device with its own power and power them with their own power supply.

The device was designed with respect to maximum compatibility with memory devices. Considering the variety of devices on the market, we cannot guarantee compatibility with every USB device available. Should you run into any issues, try formatting the memory device directly in the device. Should problems persist, use another memory device.

Due to wide range of the USB devices on the market, it is not possible to ensure compatibility of the device with all types of USB devices.

Serial number The device's serial number is a unique number that unambiguously identifies your device. Mark down the serial number of your device below along with additional information important for the unambiguous identification of your device.

Serial number: ____________________________________________________

Date of purchase: __________________________________________________

Notes: 1. The graphics in this manual is informative. 2. The menu on your TV screen may be slightly different from the illustrations in this

manual. 3. The information in the document are subject to change without notice. The

manufacturer accepts no liability for damages incurred directly or indirectly from errors, incompleteness or discrepancies between the instruction manual and the product described.

8 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Assembling the stand

2. Assembling the stand Before attaching /removing the stand, make sure the TV is turned off and plug is disconnected from the wall outlet.

Before performing the work, put underneath the LED TV set some soft material (e.g. blanket). This will prevent damage to it. Ensure a proper attachment of the supports so that the TV set is stable.

Place the assembled TV set on a firm and flat surface.

Instruction for assembling the stand

SLE 22F62TCS

SLE 2470TCS

EN 9

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

TV Buttons

3. TV Buttons

Note: The location and names of the function buttons and power button on the TV may vary according to TV model.

SLE 22F62TCS / button

Turns the TV on or standby.The TV is on,press it, brings up the main menu or press to return to the previous menu. Before enter menu, long press it for two seconds to display the Source Select. Long press it, TV will be off.

/ button Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the remote and adjust menu controls. (Note: In some menus, VOLUME UP also acts like the OK button on the remote.)

/ button Scans up/down through the channel list. In the menu system, they act like the up/down direction buttons on the remote and adjust menu controls.

SLE 2470TCS

/ button Turns the TV on or standby.The TV is on,press it, brings up the main menu or press to return to the previous menu. Before enter menu, long press it for two seconds to display the Source Select. Long press it, TV will be off.

/ button Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the remote and adjust menu controls. (Note: In some menus, VOLUME UP also acts like the OK button on the remote.)

/ button Scans up/down through the channel list. In the menu system, they act like the up/down direction buttons on the remote and adjust menu controls.

10 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Device

4. Device 4.1. Button functions of the control panel VOL+: Volume up. VOL-: Volume down. CH+: TV channel up. CH-: TV channel down. MENU: Press to select the main menu. SOURCE: Select the input signal. POWER: Turn the TV on or off.

4.2. Connecting the TV connectors

1. POWER SUPPLY INPUT 2. USB: connection of a USB flash drive for playback of supported multi media content 3. CI: input CI 4. EARPHONE: earphone output 5. Mini-AV: AV input 6. HDMI: connection of a device with HDMI output 7. COAXIAL: coaxial audio output 8. LNB IN 9. RF(C/T2) IN: connection to the antenna or to the cable television system

EN 11

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Remote controller

5. Remote controller Most of your television's functions are available on the menu that appear on the screen. The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings.

Note: The location and names of the buttons on the remote control may vary according to TV model, and not all buttons available on all models.

SMART KEY

INFO RETURN

TIMESHIFT

FAV

: (POWER) Turns the TV on or off. : (MUTE) Reduces the TV's volume to its

minimum level. Press again to restore the volume.

0-9: (numeric buttons) Enters channel numbers. Enters a digit in some functions.

ECO: To select desired power saving mode.

EPG: Turns on electronic program guide.

VOL +/-: Increases or decreases the TV's volume.

CH +/-: Scans up or down through the current channel list.

SMART KEY: Press to choose Enjoy Music, Football Mode, Sleep Timer Soundbar functions.

INFO: Display the status information.

SOURCE: Brings up the signal source selection menu.

RETURN: Returns you to the previous operation in general setting.

MENU: Enter the option menu.

EXIT: Exits the menu system.

v/V/b/B: (up, down, left and right direction buttons) Highlights different items in the menu system and adjusts the menu controls.

ZOOM-/+: Press to select the desired screen format.

OK: Confirms your selection.

Rec: To record programs under DTV or Satellite source.

TimeShift: Press the TimeShift button to pause the program to activate TimeShift function when you are watching.

Text: Teletext.

SUBTITLE: Displays the Subtitle Language menu.

LIST: Displays the Channel List.

FAV: Displays the favorite channel list.

Red button: In corresponding mode, press it to enter the right function as hint.

Green button: In corresponding mode, press it to enter the right function as hint.

Yellow button: In corresponding mode, press it to enter the right function as hint.

12 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Remote controller

Blue button: In corresponding mode, press it to enter the right function as hint. In USB mode, press to select sound track mode.

In DTV mode, press to select Audio Languages. In ATV mode, press to select Sound Type.

Note: Remove the battery during storage or if you do not use the device for a long time. To control your device with a remote controller, point it at the device and then press the desired function. The maximum range of the remote control is about 5 meters with a deviation of up to +/- 30 degrees from the perpendicular direction to the receiving remote sensor on the front of the device. The falling battery capacity decreases gradually the range of the remote controller. When you use the remote controller, there can not be any fixed obstacles between the remote controller and the device. During a standard use, the battery life in the remote controller is about 1 year. If there is a significant reduction in the effective range of the remote controller, replace both batteries in the controller. If you are not going to use the controller for a long time, take out both batteries thus preventing a possible damage from battery leakage. Prevent entry of strong light (e.g. sunlight or strong light from fluorescent or energy- saving sources) that may limit the efficiency and reliability of infrared remote controller.

EN 13

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Turn on first time

6. Turn on first time

Press SOURCE to display the list of input sources. Press V/v or SOURCE to select the required input source. Press OK to switch to the appropriate input source. Press EXIT to exit menu. To watch television connect the antenna cable with functional reception (antenna, common antenna, cable...) to TV input marked as RF-ln.

6.1. Language selection Using buttons b/B select the language used in menus and news.

6.2. Country selection Using buttons V/v select the country menu. Using buttons b/B select the required country.

14 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Turn on first time

6.3. Automatic tuning Select between the Analogue (ATV) or digital (DTV) reception or keep both receptions ATV+DTV. First will be processed the tuning of the analogue television channels (ATV). If you want to skip the ATV tuning, press the Menu button and the button with left arrow. Afterwards, the tuning of the digital television channels will be done (DTV). If you want to skip the DTV tuning, press the Menu button and the button with left arrow.

EN 15

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Turn on first time

Note: When the automatic tuning does not find any receivable channel (e.g. due to poor antenna) or you interrupted the tuning manually, you can still tune channels manually, one by one, in the device menu described below. For this you will need some technical information about the broadcast that you want to receive, e.g. the method of transmission, of the channels frequency, sound modes, the transmission speed etc.

A successful completion of the automatic tuning results in saving of the list of the available TV programs and radio stations, which you can receive immediately. In the case of multiple occurrences of the same or similar programs (e.g. due to local variations of the same central program or a remote reception with interference or local reception clean reception) verify, which station works best for you or modify the list.

Automatic satellite tuning is adapted to tune one satellite antenna with a single LNB and corresponds to the setting DiSEqC = None / None. If your antenna is complicated, specify the antenna parameters (especially control LNB DiSEqC commands) by setting that the installer of your antenna system tells you. Enter these data in the Satellite setting/Dish Setup, described in the next section.

16 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

7. Menu

7.1. Channel Menu satellite

WARNING: We strongly recommend that the antenna system is installed by an expert. A good quality installation will reward you with a stable and trouble-free reception.

Press MENU to display the main menu. Use the buttons b/B to select the item CHANNEL in the main menu.

1. Using the buttons V/v select the item, which you want to modify in the menu CHANNEL.

2. Press OK and perform the modification. 3. When you finish the modification, press MENU, save the changes and return to the

previous menu.

Acting on the information from your installer of the antenna system, specify all parameters for each of the satellites for which your system is ready and which you intend to receive. If a parameter is wrong or your antenna system will not accept any values Auto or None / None, it will not be possible to receive the satellite or under the name of a particular satellite will be accepted another satellite. When setting a satellite follow the description of the buttons for individual functions on the screen.

Select a satellite from the list, use the Right arrow to move in the parameter settings and set them correctly. Return to the list using the button EXIT. When the parameters are properly set and if it is active the first of the transponders on the list of the given satellite (still hidden) broadcasts the horizontal indicator Quality (bottom of the window) changes from empty to a nonzero value, e.g. it will be in the middle of the range. If you want to display the list of transponders of a given satellite, press the button EPG. Each

EN 17

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

transponder is mainly characterized by a frequency (and also by H/V polarization and symbol rate, e.g. 27500 kSym/s) and carries several TV programs and if you want to receive them, when selected, the indicator Quality must again show non-zero value, e.g. the middle of the range.

7.1.1. Fast scan M7 FastScan Set correctly the DiSEqC switches for the Astra 23.5 east satellite. Set the scanning mode to Fast Scan Press OK and wait until the scanning is finished.

Note on FastScan: FastScan finds the appropriate operator channel table and saves it in the device list. The list taken by FastScan function, the position and the numbers of the individual channels are determined by the broadcast operator and the user can not change them. The list is stored in the device regardless of the current reception options, antenna settings, subscriptions etc. The user is guaranteed to have in the device all the channels the operator is transmitting.

18 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

Note about updating the FastScan and consumption list: The device will check the channel list of the operator FastScan for up to date channel list availability when switched into Standby mode. To do this, simply switch off the TV at the selected Satellite input. The device will not stop to power the satellite antenna during the update, the status LED may flash several times. Only after completion of the update (about 3 minutes) will its consumption fall below the prescribed value of 0.5 W.

7.1.2. Advanced/Special tuning You can perform advanced and special tuning in the Dish Setup of the satellite. You can scan one or more satellites, one or more transponders by selection from their list using the button OK. After selection press blue button and select from the following window three selections: 1. Scanning mode between Default (is searched according to the list on TV), Blind scan

(the slowest, searches many modes and parameters of broadcasting regardless if any broadcasting exists there), Network (first is scanned for the network table NIT and then are scanned the transponders found there).

2. Channel type select Free/FTA, for which reception is not necessary any card of conditional access (CA) and Scrambled (sometimes called coded), where you need an access card. The scrambled channels are displayed in the list by a symbol of a key.

3. Service type select DTV and Radio.

Example of advanced tuning process Skylink: Set correctly according to your antenna system the satellites reception Astra 23,5

east (Astra 1E, 1G, 3A). (Or check the presence and setting of individual transponders according to the list of the operator.)

Select (check by pressing OK) in the list of this satellite the transponder 12070 MHz, horizontal polarization, symbol rate 27500 kSym/s.

After you press Scan select Network tuning. The television will first find the NIT table on TP12070 and then tunes in the programs, which are not listed there. (If you receive also the satellite Astra 19,2 east, tune programs from several transponders of this satellite, if you paid for these programs and want to receive them.)

You can delete from the extensive list of programs those, which you do not require, e.g. because they belong to another operator, whose access card you do not own.

EN 19

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

7.2. Channel menu ATV/DTV Press MENU to display the main menu. Use the buttons b/B to select the item CHANNEL in the main menu.

1. Using the buttons V/v select the item, which you want to modify in the menu CHANNEL.

2. Press OK and perform the modification. 3. When you finish the modification, press MENU, save the changes and return to the

previous menu.

7.2.1. Automatic tuning Using the buttons V/v select the item Auto Tuning and enter it by pressing OK. The same action will happen like in the first tuning, all the previously tuned channels will be deleted.

7.2.2. Manual ATV tuning

Current CH (Current channel) Setting the channel number.

20 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

Color System Select the color system. Sound System Select the sound system. Fine-Tune Fine tuning of channel frequency. Search Start channel search.

7.2.3. Manual DTV tuning Using the buttons V/v select the item DTV Manual Tuning and press OK to enter the submenu. Using the buttons b/B select the channel and press OK to perform program search.

7.2.4. Program edit Using the buttons V/v select the item Program Edit and press OK to enter the submenu.

Use the three color buttons z z z to program a channel. First, press the buttons V/v to mark the channel, which you want to select. Then: Use the red button to remove the program from the list. Use the yellow button to move the program.

EN 21

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

Use the blue button to skip the channel (the television will automatically skip the channel when you will use the buttons PR+/- for switching channels). Press FAV to add or remove the channel from the list of the Favourite channels. The position and numbers of each channel captured by FastScan are determined by the broadcast operator and the user can not change them. The color buttons are inoperative.

7.2.5. Schedule list You can program in the digital broadcast system certain time dependent actions, which are called Events. These events scheduled by you (programmed) are saved in the list. Using the buttons V/v select the item Schedule List and press OK to enter the submenu. It is available with some sources.

Enter the following interface using the yellow button.

If there is a conflict in the set time a warning appears.

Note: Scheduled tasks require precise time setting, otherwise their execution may be inaccurate or unreliable. Use accurate time from broadcast to schedule tasks, set correct time zone, daylight saving time, and perform tasks when the TV is on.

22 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

Note: If your Conditional Access System (CAM) supports URI protection, you need to enter the PIN (CI CAM PIN) of your CA system for the first time. This is different from the TV lock password, it is assigned by the CAM operator.

7.2.6. Signal information Use the buttons V/v to select the item Signal Information. Press OK to display detailed information about the signal, its strength and quality (interference level). Available only for the DTV signal. For satisfactory reception use only programs/channels with the highest values of both variables, max. is 100.

7.3. Picture Menu Press MENU to display the main menu. Use the buttons b/B to select the item PICTURE in the main menu.

1. Using the buttons V/v select the item, which you want to set in the menu PICTURE. 2. Press OK and set.

EN 23

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

3. After you finish the setting, save it by pressing the button MENU and return to the previous menu.

7.3.1. Picture mode Using the buttons V/v select the item Picture Mode and press OK to enter the submenu. If the picture is in the Personal mode, you can change the values of contrast, brightness, colors, sharpness and tint.

Tip: For direct picture mode change you can use the button P.M.

Contrast / Brightness / Color / Tint / Sharpness Using the buttons V/v select the item and then perform the modification using the buttons.

Contrast: The level of intensity of the light places in the picture. The dark places remain unchanged. Brightness: Setting the overall brightness of the picture. It will affect the dark places in the picture. Colour: Setting the color saturation according to your preferences. Tint: Used for color compensation, only for NTSC. Sharpness: Setting the highlighting of picture details.

Note: The items are available only for Personal picture setting.

24 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

7.3.2. Color temperature Change of the overall color presentation. Using the buttons V/v select the item Color Temperature and then press OK to enter the submenu. Using the buttons b/B select the mode (available picture modes: Cold, Normal, Warm).

Cold Emphasizes blue tint of the white color. Normal Keeps the white color neutral. Warm Emphasizes reddish tint of the white color

7.3.3. Noise reduction Used to filter and suppress noise in an image and improve image quality. Using the buttons V/v select the item Noise Reduction and them press OK to enter the submenu.

Off: Noise detection in the picture is off. Low: Detection and reduction of a low picture noise. Middle: Detection and reduction of a medium strong picture noise. High: Detection and reduction of a strong picture noise. Default: Set as default.

EN 25

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

7.3.4. HDMI mode Select for the currently connected source in the HDMI input either Video (e.g. satellite receiver) or PC (computer) or AUTO. This way you will adjust the picture processing and its size to the current source. When a source is not connected the HDMI is not active.

7.4. Sound menu Press MENU to display the main menu. Press b/B to select in the main menu the item SOUND.

1. Using the buttons V/v select the item, which you want to set in the menu SOUND. 2. Press OK and set. 3. After you finish the setting, save it by pressing the button MENU and return to the

previous menu.

7.4.1. Sound mode Use the buttons V/v to select the item Sound Mode and press OK to enter the submenu. Use the buttons V/v to make selection.

If the sound is in Personal mode(Personal), you can change the treble and bass values.

26 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

Tip: To change the sound mode directly, use the button S.M. on the remote controller.

Standard: Provides balanced sound in all environments. Music: Maintains the original sound. Suitable for music programs. Movie: Emphasizes the treble and bass for an enhanced audio experience. Sports: Emphasizes voice in sports programs. Personal: It allows you to customize the sound settings.

Note: Bass and treble are available only in the Personal mode, where you can set it as necessary.

7.4.2. Balance Use the buttons V/v to select the item Balance. Use the buttons b/B to perform the adjustment.

7.4.3. Automatic volume levelling Use the buttons V/v to select the item Auto Volume Level and then use the buttons b/B to select the option On or Off.

7.4.4. Digital output Use the buttons V/v to select the item SPDIF Mode and then use the buttons b/B to select the option Off, PCM or Auto. Designed to process the external digital sound.

7.4.5. Switching the sound description Use the buttons V/v to select the item AD Switch and then use the buttons b/B to select the option On or Off. Function for the visually impaired, at which an active audio track describes the current picture. It requires the support of the encoded data stream. When you turn the function on, it adds to the original sound of the program a commentary with a preset volume, with which are some programs equipped by the broadcaster.

Note: Balance: this item allows to set the speaker output and to optimize listening from the place where you are. Auto Volume Level: This item is used to automatically reduce the differences between the volumes of channels and programs.

EN 27

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

7.5. Time menu Press MENU to display the main menu. Use the buttons b/B to select the item TIME in the main menu.

1. Using the buttons V/v select the item, which you want to set in the menu TIME. 2. Press OK and set. 3. After you finish the setting, save it by pressing the button OK and return to the

previous menu.

7.5.1. Time zone Use the buttons V/v to select the item Time Zone and press OK to enter the submenu. Use the buttons V/v/b/B to select the time zone.

Note: Correct time setting (incl. the switching to summer time) is needed for many functions of digital broadcasting, e.g. EPG. The accurate time is present in the broadcasting and the device synchronizes with it. It is necessary only for the user to set the correct time zone.

28 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

7.5.2. Sleep Timer Use the buttons V/v to select the item Sleep Timer and press OK to enter the submenu. Use the buttons V/v to select (available options: Off, 15 min, 30 min, 45 min, 60 min, 90 min, 120 min, 240 min).

7.5.3. Automatic standby mode Use the buttons V/v to select the item Auto Standby and press OK to enter the submenu. Use the buttons V/v to make selection.

Tip: If you do not use the remote control during the set time, the TV automatically switches to standby mode. If you use the controller, the timer resets. The length of time suffices for most users. You can deactivate the shutoff function entirely by selecting OFF.

EN 29

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

7.5.4. Menu display timer Use the buttons V/v to select the item OSD Timer and press OK to enter the submenu. Use the buttons V/v to select how long should be displayed the setting options on the screen before they disappear.

7.6. Lock menu Press MENU to display the main menu. Use the buttons b/B to select in the main menu the item Lock. You have to enter a valid password.

1. Using the buttons V/v select the item, which you want to set in the menu LOCK. 2. Press b/B and enter the setting. 3. After you complete the setting, save it by pressing MENU and return to the previous

menu.

The default factory password is 0000, and if you forget what you have set, contact a service centre.

30 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

7.6.1. Lock system Use the buttons V/v to select the item Lock System, press OK and select one of the following three options.

7.6.2. Setting the password Use the buttons V/v to select the item Set Password and then press OK to enter the submenu and enter the new password.

EN 31

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

7.6.3. Channel Lock Use the buttons V/v to select the item Channel Lock and then press OK to enter the submenu and select. Use the green button to lock or unlock the channel. You have to enter the a password to watch it.

7.6.4. Parental Guidance Use the buttons V/v to select the item Parental Guidance and then press OK to enter the submenu where you select the age suitable for your children. The broadcaster can provide information about a program about a recommended or minimum age for watching it. If a program is broadcast with hidden mark of minimum age, the device then compares it with what you entered, and possibly prompts for a password, so that you can watch the program for higher age.

7.6.5. Key Lock Use the buttons V/v to select the item Key Lock and then use the buttons b/B to select the option Off or On. If the key lock is active, you can not use the buttons on the control panel of the TV.

32 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

7.6.6. Hotel mode Hotel Mode is used to restrict certain TV functions, to make it easy to operate in places where should be e.g. limited maximum volume or to prevent tuning TV.

1. Use the buttons V/v on the remote control to select the hotel mode in the menu Lock.

2. Press OK on the remote controller to enter the submenu. 3. After you finish the setting, save it by pressing the button MENU and return to the

previous menu.

7.7. Hotel mode Using the buttons V/v select the item Hotel Mode and then use the buttons b/B to select the option On or Off.

7.7.1. Source Lock Use the buttons V/v to select the item Source Lock and then press OK to enter the submenu and to select.

7.7.2. Default Source Use the buttons V/v to select the item Default Source and then press OK to enter the submenu and to select.

7.7.3. Default Program Use the buttons V/v to select the item Default Prog and then use the buttons b/B to select.

7.7.4. Maximum Volume Use the buttons V/v to select the item Max Volume and then use the buttons b/B to select.

EN 33

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

7.7.5. Clear Lock Use the buttons V/v to select the item Clear Lock and then press OK to delete the previous settings.

7.8. Setup menu Press MENU to display the main menu. Use the buttons b/B to select the item SETUP in the main menu.

1. Using the buttons V/v select the item, which you want to set in the menu SETUP. 2. Press b/B and enter the setting. 3. After you finish the setting, save it by pressing the button MENU and return to the

previous menu.

7.8.1. Menu language on the screen Select the displayed language of the menu on the screen. English is the selected default menu language. Use the buttons V/v/b/B to select the menu language.

34 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

7.8.2. TT Language Use the buttons V/v to select the item TT Language and then press OK to enter the submenu. Use the buttons V/v/b/B to select the teletext language if the national alphabet is not correctly displayed.

7.8.3. Audio Language Press V/v to select the item Audio Languages and then press OK to enter the submenu. Automatically selects a specific language if it is present in the broadcast. You can use two languages in order of primary and secondary. If there is no language selected by you, the language of the broadcaster will be selected. Use the buttons b/B to select the primary/secondary language. Use the buttons V/v/b/B to select the audio languages.

7.8.4. Subtitle Language Press V/v to select the item Subtitle Language and then press OK to enter the submenu. Automatically selects a specific language if it is present in the broadcast. You can use two languages in order of primary and secondary. If there is no language selected by you, the language of the broadcaster will be used.

EN 35

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

Use the buttons b/B to select the primary/secondary language of the subtitles. Use the buttons V/v/b/B to select the subtitle language.

7.8.5. Hearing Impaired, Impaired listening Use the buttons V/v to select the item Hearing Impaired and then press OK to select the option On or Off. Depends on the program broadcasting.

7.8.6. PVR File System It is an option to set recording (PVR) of digital broadcasts on your USB storage device. Due to the size of data of the incoming digital broadcasting the setting is more detailed. Use the buttons V/v to select the item REC File System and then press OK to enter the submenu. Use the buttons V/v to select the item Check REC File System and then enter the settings by pressing OK. The speed of the USB device will be checked. The result determines what best broadcast is your USB device capable of holding. When the result is unsatisfactory, format the TV, which will attempt to adapt the USB device better to the digital broadcast recording. Due to the limit of the file size and recording choose lower values. Higher values rapidly increase the demands on your memory device, both on size and especially the speed.

WARNING: Formatting permanently erases all contents of the memory device!

36 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

Note: First try each USB device for speed and the reliability of recording. When the result is unsatisfactory, replace it with another one, mainly faster. The speed of the USB memory is the basic parameter of the reliability of the recording and also of the time shift.

Note on recording and copyright protection: PVR and time shift recordings can place higher demands on the speed of the connected memory and verification of the copyrights to the encrypted broadcast. Changing the mode (e.g. start and end) or some operations may wait for these external stimuli and response to the user's instructions may slow down. If the broadcast rights only allow watching and not a recording, the device will notify you. The recording on your storage device is encrypted for protection of copyright against use on another device.

7.8.7. Aspect ratio Use the buttons V/v to select the item Aspect Ratio and then press OK to enter the submenu. Use the buttons V/v to select the aspect ratio (available options: Auto, 4:3, 16:9, Zoom1, Zoom2).

7.8.8. Blue screen Use the buttons V/v to select the item Blue Screen and press OK to select the option On or Off. The function will apply if there is no useful picture signal to display.

7.8.9. First Time Installation Use the buttons V/v to select the option First Time Installation and then press OK to enter the settings. You erase the previous settings and tuning and go through the whole process of putting the device into operation again.

EN 37

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

7.8.10. Reset, Reset the default factory setting. Use the buttons V/v to select the item Reset and then press OK to enter the submenu. The function performs return of TV settings to factory defaults, except for deletion of the list of tuned programs.

7.8.11. Software Update (USB) Use the buttons V/v to select the item Software Update (USB), insert the USB device in the USB slot and then press OK, to update the software.

WARNING: Update the new TV software only in case when you have the original software producer for the given type including the description of the changes. Any attempt to update with non-genuine software, even with small differences may end up causing irreversible damage to the TV, which is not covered by warranty.

7.8.12. HDMI CEC The feature performs settings of special items of digital communication between devices at the HDMI interface. Follow the instructions in your external HDMI CEC to set the items and verify the correct communication. Press V/v to select the item HDMI CEC and then press OK to enter the submenu.

CEC Control Press b/B to switch on or off the HDMI CEC function. Audio Receiver Press b/B to switch on or off the HDMI Audio receiver function.

Auto Standby, Device Auto Power Off, TV Auto Power On. Press b/B to turn on or off the auto standby mode for this TV set as well as for a connected device.

Device List, Device Menu Press the OK button to open the main menu of the device.

38 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Menu

7.9. ATV Channel menu Press the button MENU to display the main menu (in the ATV mode). Use the buttons b/B to select the item CHANNEL in the main menu. 1. Using the buttons V/v select the item, which you want to set in the menu

CHANNEL. 2. Use the buttons b/B to set a value. 3. When you finish the setting save it by pressing the button MENU and return to the

previous menu.

7.9.1. Automatic tuning Use the buttons V/v to select the item Auto Tuning and press OK to start tuning.

7.9.2. Manual ATV tuning Using the buttons V/v select the item ATV Manual Tuning and press OK to enter the submenu.

7.9.3. Manual DTV tuning Using the buttons V/v select the item DTV Manual Tuning and press OK to enter the submenu.

7.9.4. Programme Edit Use the button V/v to select the item Programme Edit and press OK to enter the submenu.

Notes: 1. The menu Sound and its description are the same like in the DTV mode (however

the item AD switch is not available). 2. The menu Lock and its description are the same like in the DTV mode. 3. In the menu TIME the items to set time and the time zone selection are not

available. 4. In the menu Setup are not available the items Hearing impaired and PVR

recording.

EN 39

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Menu

7.10. Component Input / HDMI / AV menu

Notes: 1. The menu Picture and its description are the same like in the DTV mode. 2. The menu Sound and its description are the same like in the DTV mode (however

the item AD switch is not available). 3. The menu Lock and its description are the same like in the DTV mode. 4. The menu Channel is not available in the AV / Component input / HDMI modes. 5. In the menu Time the items to set time and the time zone selection are not

available. 6. AV does not support Hearing Impaired items and PVR recording; Component input

or HDMI do not support teletext language and Hearing Impaired items.

40 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

USB

8. USB

Note: Before you use the Media menu, connect the USB device and then press SOURCE and set the input source to Media. The TV set detects the majority of the USB devices and shortly offers you to switch to playback. When you will not respond, the offer disappears and the TV remains in the original mode. Use the buttons V/v to select the item Media in the menu Source and press Enter to enter the settings.

Use the buttons b/B to select in the main menu the item Media, which you want to set and press Enter to enter the settings.

EN 41

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

USB

8.1. Photo Menu Use the buttons b/B to select in the main menu the item PHOTO and then enter the interface by pressing OK. Press Exit to return to the previous menu and to exit menu.

Press b/B to select in the file menu the file, which you want to view and press the OK button to display the picture. If you want to view only this image, press the button Pause, otherwise the slideshow of all the photos in the directory starts, beginning with the tagged picture. Press the down arrow to hide the information bar with slideshow controls. To resume the paused slideshow, press Play/Pause. Stop the slideshow by pressing EXIT, you will return to the directory list. When you pause on an image in the directory list, after a while, the file information appears on the right, and a preview of the image is displayed in the middle.

Basic functions: Repeat ALL Use the buttons b/B to select the repeat mode, press OK and select Repeat None / Repeat all / Repeat 1. Music Use the buttons b/B to select the item Music, press OK and select the music background. Playlist Use the buttons b/B to select the item Playlist, press OK to enter. Info Use the buttons b/B to select the item Information, press OK to enter. Detailed information about the picture is displayed. Rotate Use the buttons b/B to select the item Rotate. You can rotate the picture as needed. Zoom in/Zoom Out You can select zooming in or out of the picture. Move View If the picture is larger than the screen, use this function to move the picture.

42 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

USB

8.2. Music menu Use the buttons b/B to select in the main menu the item MUSIC and then enter the interface by pressing OK. Press Exit to return to the previous menu and to exit menu.

Use the buttons b/B to select the disk unit, which you want to play and press OK to enter the interface. You can hide the information bar by using the arrow button down, you can renew it by pressing OK. End playback by pressing EXIT, you will return to the directory. When you pause in the directory on a music file, after a while the information about the file is displayed on the right and a playback starts.

Use the buttons b/B to select the item to return to the previous menu.

EN 43

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

USB

8.3. Movie menu Use the buttons b/B to select in the main menu the item MOVIE and then enter the interface by pressing OK. Press Exit to return to the previous menu and to exit menu.

Use the buttons b/B to select the disk unit, which you want to play and press OK to enter the interface. Press the media button to play the selected movie if it is acceptable for playing, especially its codec. Press Display to select information bar at the bottom, which you want to start and press OK to enter it. If there is in the movie directory also a file with external subtitles with the same name as the movie, the device will play it (the button SUBTITLE). You can select among national alphabets by pressing CharSet in the information bar. When you pause in the directory on a movie file, after a while information about the file is displayed on the right and the file starts playing. Press Exit to return to the previous menu and press again to exit the overall menu.

44 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

USB

8.4. Text Menu Use the buttons b/B to select in the main menu the item TEXT and then enter the interface by pressing OK. Press Exit to return to the previous menu and to exit menu.

Use the buttons b/B to select the drive unit which you want to browse and press OK to enter the interface. Use the buttons b/B to select the item to return to the previous menu.

EN 45

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Troubleshooting

9. Troubleshooting

WARNING: Under no circumstances should you try to repair the appliance yourself, the device does not contain parts that could be repaired by the user. Always take the device to an authorized service center if a repair or adjustment are necessary other than regular maintenance. Unauthorized interference with the device is considered a breach and the loss of warranty claim. The importer, supplier, distributor or vendor shall not be liable for any losses caused by a violation of regulations listed in this manual. Do not open the device, there is the danger of electric shock. In the case of device failure, first check the following list of problems and their solutions. If you fail to remove the defect according to the following tips, contact your vendor.

Problems Possible solutions

The TV set has no power. Check the attached power cord and the functioning of the electrical outlet. Unplug the power cord, plug it in after 60 seconds and turn the TV set on again.

No picture. Check the antenna connection. There could have been problems at the broadcasting station, try another station. Adjust contrast and brightness.

Good picture, but no sound. Raise volume. Check that the sound is not muted (Mute function). Press MUTE on the remote controller. Check audio settings. If you use an external device, make sure that its volume is not muted or the sound is not switched off. If you use the A/V or a component input, make sure that the cables are correctly connected and are not loose. If you use a cable with DVI reduction on HDMI, you need a separate audio cable. Make sure that the headphones jack is not occupied.

Good sound, but an unusually colored picture or no picture.

Check the connection and the state of the antenna. If you use a component input, check the connection. Incorrect or loose connection can cause problems with colors or empty screen.

46 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Troubleshooting

Problems Possible solutions

The TV set does not respond to the remote controller.

The batteries in the remote controller might be empty. If it is necessary, replace them with new ones. Clean the lens of the remote controller. The distance between the LED TV set and the remote controller should be no more than 8 m, in the recommended operating angle and with no obstacles in the path of the beam. Prevent the impact of strong light (daylight, sunlight or fluorescent light lamps and fluorescent tubes) on the TV and remote controller.

There are color points on the screen.

Although the LED screen is made with high-precision technology and 99.99% or more of the pixels are operational, the screen can display permanently unlit or lit points of light (red, blue or green). This is a construction feature of the LED screen and is not a malfunction.

The picture falls apart. Keep the TV set away from interfering sources of electricity, such as cars, hair-dryers, welders and any optional equipment. The disintegration of image may be caused by atmospheric phenomena, such as a local or distant thunderstorm. When installing optional equipment, leave a space between the optional equipment and the TV set. Check the antenna and the connection. Keep the antenna away from the power or input/ output cables.

After automatic tuning only some channels are available.

Check if your area is covered by digital TV broadcasting. Try to retune or manually tune the missing channels. Check if you use the correct antenna type.

Cannot select a channel. Check if the channel is not blocked in the main menu settings.

Cannot play from the USB device.

Check the connecting channel between the USB and power connection. The hard disc was not formatted. Make sure that the USB flash unit is compatible and contains supported formats of multimedia data.

EN 47

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Troubleshooting

Problems Possible solutions

The picture is distorted, contains macroblocks, microblocks, points, large pixels, etc.

Video compression can cause disruption, especially during rapid movement, e.g. In sports programs and action movies.

Speaker noise Check the cable connections, make sure that the video cable is not connected to video input. Sound distortion can be caused by a low level of the signal.

The TV set turns off automatically.

Make sure that the sleep timer or power save mode timer are not on.

The TV set turns on automatically.

Make sure that the timer to turn on is not on in the settings menu (Settings).

The picture is not displayed on the whole screen.

First make sure that the problem is not caused by the input signal. Then try to adjust the item Zoom in the Functions menu.

Picture defects and their causes

Snowy screen Snowy screen is usually caused by a weak signal. Change the antenna setting or install an antenna booster.

Double images or ghosting Double image is usually caused by reflection from tall buildings. Adjust the antenna orientation or place it higher.

Radio frequency interference Waves are moving on the screen, which is usually caused by neighbouring radio transmitters or shortwave receiver.

Interference by electrothermal devices with high temperature Inclined or arrow shaped patterns appear on the screen or a part of the picture is missing. This is probably caused by electrothermic devices with high temperatures in a nearby hospital.

48 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Technical specifications

10. Technical specifications Model SLE 22F62TCS SLE 2470TCS

Panel size 22" (55 cm) 24" (60 cm)

Power consumption 35 W 40 W

Standby consumption <0.5 W <0.5 W

Rated voltage AC 100240 V ~ 50/60 Hz or 12V

AC 100240 V ~ 50/60 Hz or 12V

Remote controller Yes Yes

VESA wall mount 100 100 100 100

Dimensions with stand (w h d) 505 x 341 x 134 mm 549 x 365 x 134 mm

Dimensions without stand (w h d) 505 x 303 x 78 mm 549 x 331 x 87 mm

Net weight with stand 2.2 kg 2.6 kg

Connection

RF IN 1 1

AV IN 1 1

HDMI 1 1

Optical Output 1 1

USB 1 1

Supported USB formats "HEVC, MKV, AVI, MP4, MPEG, FLV, MP3, WMA, JPEG, JPG,

PNG, BMP"

"HEVC, MKV, AVI, MP4, MPEG, FLV, MP3, WMA, JPEG,

JPG, PNG, BMP"

CI slot 1 1

Headphones output 1 1

Other functions

Resolution 1920 x 1080 1366 x 768

Brightness (cd/m2) 165 200

Response time (ms) 6.5 6.5

Viewing angle H: 178, V: 178 H: 178, V: 178

Embedded tuner DVB-T/T2, DVB-C, DVB-S2 DVB-T/T2, DVB-C, DVB-S2

Video system PAL/SECAM BG/DK/I PAL/SECAM BG/DK/I

PVR recording to USB Yes Yes

Progressive scan Yes Yes

Timeshift No No

EPG Yes Yes

Comb filter Digital Digital

OSD menu EN, CZE, POL, HUN, SVK, GER, FRE, ITA, SPA, GRC, HRV, SRP,

BUL, SLV, LIT, RUS, ROM

EN, CZE, POL, HUN, SVK, GER, FRE, ITA, SPA, GRC, HRV, SRP,

BUL, SLV, LIT, RUS, ROM

Zoom Yes Yes

Noise reduction Yes Yes

Timer OFF / ON / SLEEP Yes Yes

Subtitles Yes Yes

Audio language Yes Yes

EN 49

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Technical specifications

Channel list Yes Yes

Favourites list Yes Yes

Image freeze Yes Yes

Radio Yes Yes

Lock Yes Yes

Parent lock Yes Yes

Hotel mode Yes Yes

Note: Technical specifications may change without prior notice. The original version is in Czech.

Manufacturer address: FAST R, a.s, ernokosteleck 1621, 251 01 any, Czech Republic

50 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

Information sheet Importer: FAST R, a.s., ernokosteleck 1621, 251 01 any Brand Sencor

Model SLE 22F62TCS SLE 2470TCS

Energy efficiency class A A

Screen diagonal in cm / inches [cm/"] 55/22 60/24

Electric energy consumption when on [W] 22 26

Annual electric energy consumption* [kWh] 33 38

Electric energy consumption in standby mode [W] 0,5W 0,5W

Screen resolution [pixels] 1920 x 1080 1366 x 768

* Electrical energy consumption 33 kWh for SLE 22F62TCS and 38 kWh for SLE 2470TCS per year is based on the electricity consumption of a TV set operating 4 hours per day for 365 days. The actual electric energy consumtpion will depend on how the television is used.

EN 51

EN

Revision 04/2020Copyright 2020, Fast R, a. s.

Technical specifications

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states you may return your products to your local retailer when buying an equivalent new product. The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.

For business entities in the European Union If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.

Disposal in other countries outside the European Union If you wish to dispose of this product, request the necessary information about the correct disposal method from local government departments or from your seller.

Hereby, FAST R a.s. declares that the radio equipment type SLE 22F62TCS and SLE 2470TCS is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: www.sencor.eu

Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.

52 EN

EN

Revision 04/2020 Copyright 2020, Fast R, a. s.

EN Warranty conditions

Warranty card is not a part of the device packaging.

This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty is limited to the following conditions. Warranty is referred only to the customer goods using for common domestic use. The claim for service can be applied either at dealers shop where the product was bought, or at below mentioned authorized service shops. The end-user is obligated to set up a claim immediately when the defects appeared but only till the end of warranty period. The end user is obligated to cooperate to certify the claiming defects. Only completed and clean (according to hygienic standards) product will be accepted. In case of eligible warranty claim the warranty period will be prolonged by the period from the date of claim application till the date of taking over the product by end-user, or the date the end-user is obligated to take it over. To obtain the service under this warranty, end-user is obligated to certify his claim with duly completed following documents: receipt, certificate of warranty, certificate of installation.

This warranty is void especially if apply as follows: Defects which were put on sale. Wear-out or damage caused by common use. The product was damaged by unprofessional or wrong installation, used in contrary to the applicable

instruction manual, used in contrary to legal enactment and common process of use or used for another purpose which has been designed for.

The product was damaged by uncared-for or insufficient maintenance. The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood). Defects on functionality caused by low duality of signal, electromagnetic field interference etc. The product was mechanically damaged (e.g. broken button, fall). Damage caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable

working conditions (e.g. high temperatures, high humidity, quakes). Repair, modification or other failure action to the product by unauthorized person. End-user did not prove enough his right to claim (time and place of purchase). Data on presented documents differs from data on products. Cases when the claiming product cannot be indentified according to the presented documents (e.g. the

serial number or the warranty seal has been damaged).

Manualsnet FAQs

If you want to find out how the SLE 22F62TCS Sencor works, you can view and download the Sencor SLE 22F62TCS Television User Manual on the Manualsnet website.

Yes, we have the User Manual for Sencor SLE 22F62TCS as well as other Sencor manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Sencor SLE 22F62TCS. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sencor SLE 22F62TCS Television User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sencor SLE 22F62TCS Television User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sencor SLE 22F62TCS Television User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sencor SLE 22F62TCS Television User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sencor SLE 22F62TCS Television User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.