Sencor SPV 7771DUAL DVD Player User Manual PDF

USERS MANUAL

SPV 7771DUAL SPV 7971DUAL PORTABLE DVD PLAYER

Table of Contents

EN

Safety Precautions ................................................................................................................................................................................................ 2 Introduction ............................................................................................................................................................................................................ 5 Description of player ............................................................................................................................................................................................. 7 Main unit .......................................................................................................................................................................................................... 7 Side unit ........................................................................................................................................................................................................... 7 Remote control ................................................................................................................................................................................................ 8 Insert the battery ............................................................................................................................................................................................ 10 SETUP Menu Setting .......................................................................................................................................................................................... 11 General Setup Page ...................................................................................................................................................................................... 11 Audio Setup Page .......................................................................................................................................................................................... 11 Video Setup Page .......................................................................................................................................................................................... 12 Preference Setup Page ................................................................................................................................................................................. 13 Password Setup Page ................................................................................................................................................................................... 13 Settings menu of the side unit ........................................................................................................................................................................... 15 Parameters and speci cations........................................................................................................................................................................... 16 Maintenance and Service.................................................................................................................................................................................... 17 Troubleshooting tips ........................................................................................................................................................................................... 18

Before connecting, operating or adjusting this product, please read this users manual carefully and completely contains important information for safe and optimal use of all features and functions. Store the users manual in case you need it again.

EN 1

Appendix to LCD Instruction Manual

A still image may case permanent damage to screen

2 EN

Safety Precautions

The device is a precision product taking advantage of the advances of modern electronics, mechanics and optics and requires corresponding

EN 3

Safety Precautions

4 EN

Safety Precautions

charge strong impact over heat 40 C

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited. Due to wide offer of USB devices/SD/MC/MMS cards on the market, we do not guarantee full compatibitity of the device with all types USB sticks/SD/MC/MMS cards.

EN 5

Introduction

The users manual contains information and instructions for the correct installation, connection, setup, operation and service of this device. The identi cation of buttons, connectors, and other control

and connection elements of the player are described using CAPITAL LETTERS in the users manual.

For all text information displayed on the screen of the player or on the screen of the connected television the users manual uses bold letters.

This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location.

Symbol Used in this Manual

The lightning ash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk of electric shock.

The exclamation point alerts you to the presence of important operating and maintenance/servicing instructions.

Indicates hazards likely to cause harm to the unit itself or other material damage.

Note: Indicates special notes and operating features.

Tip: Indicates tips and hints for making the task easier. A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.

DVD and nalized DVDR/RW Video CDs Audio CDs MP3 Discs JPEG Discs

may appear on your TV display during operation and indicates that the function explained in this owners manual is not available on that speci c DVD video disc.

Notes on Discs Handling Discs Do not touch the playback side of the disc. Hold the disc

by the edges so that ngerprints do not get on the surface. Never stick paper or tape on the disc for labelling discs use special soft tip markers designed for this use, write on the side of the disc with the label.

After playing, store the disc in its case. Do not expose the disc to direct sunlight or source of heat and never leave it in a parked car exposed to direct sunlight or near a heat source, do not leave discs in closed vehicles parked in direct sunlight. Risk of disc deformation.

6 EN

Introduction

Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality

and sound distortion. To remove them wipe the disc with a soft lint free cloth before playing. When cleaning the disc proceed from the centre directly to the edge (not in circular motion).

Do not use vinyl record anti-static sprays, petrol, ethanol or other solvents or thinners.

DVD (8 cm/12 cm disc)

Video CD (VCD) (8 cm/12 cm disc)

Audio CD (8 cm/12 cm disc)

Apart from the above mentioned disc types it is possible to play DVD+/-R, DVD+/-RW, Kodak Picture CD, SVCD, CD-R with recordings in CD format (CD audio copy), CD-R with compressed music les in formats MP3, CD-R with image les in the format JPEG. Playing of disc types not mentioned here is not guaranteed.

This indicates a product feature that is capable of playing DVD-RW discs recorded with Video Recording format.

Notes: 1. Depending on the recording media, recording method

(used PC program used for the disc recording) and its nalisation, it is possible that it will not be possible to play some CD-R or DVD+/-RW/R discs.

2. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.

3. Use the player to play only circular discs - when playing irregular shaped discs there is a risk of damaging the disc or the player.

4. Some playback operations of DVDs and Video CDs may be intentionally programmed by software manufacturers. This unit plays DVDS and Video CDs according to disc content designed by the software manufacturer, therefore some playback features may not be available or other functions may be added.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Region code This player is designed for playing DVD video marked with region code 2 or ALL (discs labelled in this way can be played by all DVD players). The discs region code is located on its label or cover, the players region code is located on the back/bottom side of the player. After inserting a DVD with a different region code than mentioned above a message Check Region Code will be displayed on the screen and DVD playback will be rejected by the player.

EN 7

Description of player

Main unit

Side unit

1. SD/MS/MMC 2. ON/OFF (Power switch) 3. (Headphone jack) 4. AV OUT (AV output) 5. COAXIAL (Digital audio output) 6. USB 7. DC OUT (Direct current power output 9 12V) 8. DC IN 9 12V connector (Direct current power input) 9. (Play / pause) 10. / Previous / up 11. / Down / next 12. (Stop) 13. SOURCE button (Source)

14. MODE (Mode) button 15. (Up) 16. (Down) 17. /VOL- (Left / decrease volume) 18. /VOL+ (Right / increase volume) 19. ON/OFF (Power switch) 20. AV IN (AV input) 21. (Headphone jack) 22. DC IN (Direct current power input 9 12 V)

8 EN

Description of player

Remote Control

1. SOURCE button DVD/CARD/USB.

2. MUTE button Disable Audio output.

3. 0 9 Number buttons Select numbered items in a menu.

4. DISPLAY button Display the playtime and status information.

5. 10+ button In order to select a track 10 or greater, rst press 10+button. For example; select track 12, rst press 10+, and then press button number 2.

6. MENU/PBC button Return to DVD root menu (DVD). PBC on/off switch. Only for VCD. For other discs, the function is invalid.

7. AUDIO button : Press AUDIO button repeatedly during playback to hear a

different audio language or audio track, if available. : Press AUDIO button repeatedly during playback

to hear a different audio channel (Left, Right, Mix, Stereo).

8. PLAY/PAUSE button Press button once to pause playback, pressing button second time will resume the playback.

9. STOP button When button is pressed once, the unit records the stopped point where the playback will resume if button is pressed after wards. But if button is pressed again instead of button, there will be no resume function.

10. MODE button Set LCD parameter (adjust brightness, contrast, saturation).

11. VOL + button Increase volume.

12. button Go to next chapter/track.

13. button Go to the beginning of previous chapter/track.

14. button Press button to allow skipping ahead at 5-level speed (X2 X4 X8 X16 X32 PLAY), press button to return to normal playback.

EN 9

Description of player

15. button Press button to allow skipping back at 5-level speed (X2 X4 X8 X16 X32 PLAY), press button to return to normal playback.

16. STEP button Press STEP button once to pause playback. From this status, press STEP button to advance one video frame.

17. SEARCH button Go to time point, title or chapter you want in DVD mode.

18. SUBTITLE button Press SUBTITLE button repeatedly during playback to hear a different subtitle languages.

19. ANGLE button : Press ANGLE button will change the view angle, on DVDs that

support this feature.

20. TITLE button Return to DVD title menu.

21. ENTER button Con rm menu selection.

22. SETUP button Accesses or removes setup menu.

23. VOL- button Decrease volume.

24. REPEAT button Press REPEAT button during playback to select a desired repeat mode.

: you can play a chapter/title/off. : you can play a single/all/off. : you can select repeat single/folder/off.

25. SLOW button Press Slow button repeatedly to enter slow playback, and cycle between different speeds. The speeds are: 1/2, 1/4, 1/8, 1/16 and normal.

26. PROGRAM button : The program function enables you to store your

favourite tracks from the disc. Press PROGRAM button, then PROGRAM MENU will appear on screen, now you can use the number key to direct input the titles, chapters or tracks number and select PLAY option. To resume normal playback, press PROGRAM button and select CLEAR option on the program menu.

27. ZOOM button Use ZOOM to enlarge or shrink the video image. 1. Press ZOOM button during playback or still playback to activate

the Zoom function. 2. Each press of the ZOOM button changes the TV screen in the

following sequence: 2X 3X 4X 1/2 1/3 1/4 normal size

: Use ZOOM to enlarge or shrink the picture. 1. Press ZOOM button. 2. Use button to enlarge, use button to shrink the picture.

Use /// buttons to move through the zoomed picture.

10 EN

Description of player

Insert the battery 1. Open the battery door. 2. Insert battery.

Hole

Notes: Remove battery during storage or when you are not using the DVD player for a long time.

To control the device using the remote control, point the remote control at the device and then press the button with the required function. The maximum range of the remote control is about 5 meters with a deviation of up to +/- 30 from the perpendicular direction to the reception sensor of the remote control on the front side of the device. The falling capacity of the batteries gradually reduces the remote control range. There must be no solid obstacles in the area between the remote

control and the device when the remote control is being used. During standard use the lifetime of batteries in the remote control

is about 1 year. When the effective range of the remote control is substantially reduced, or when there are problems with its use, change both the batteries in the remote control.

If you will not be using the remote control for a longer period of time, take out both batteries from it - in this way you will prevent potential damage caused by their leakage.

The batteries must not be exposed to excessive heat, such as sun radiation, re, etc.

The incorrect use of batteries may cause the leakage of the electrolyte and corrosion. To ensure that the remote control works correctly, proceed according to the instructions below: Do not insert the batteries in the wrong direction. Do not recharge, heat, open or short the batteries. Do not throw batteries into a re. Do not leave discharged batteries in the remote control. Do not combine various types of batteries or new and old batteries. If you are not using the remote control for a longer period of time,

remove the batteries to prevent potential damage caused by a subsequent battery leakage.

If the remote control is not working correctly or its operational range is reduced, change all batteries for new ones.

If electrolyte leaks out from the batteries, have the remote control cleaned by an authorised service centre.

EN 11

Setup Menu Setting

Press SETUP button to enter the setup menu. Use direction buttons /// to select the preferred item. After nishing settings, press SETUP button again to normal display. The following menu items can be changed:

GENERAL: Select the GENERAL SETUP PAGE menu. AUDIO: Select the AUDIO SETUP PAGE menu. VIDEO: Select the VIDEO SETUP PAGE menu. PREFERENCE: Select the PREFERENCE SETUP PAGE menu. PASSWORD: Select the PASSWORD SETUP PAGE menu.

General Setup Page

TV Display Select the aspect ratio of the playback picture. 4:3 PANSCAN: If you have a normal TV and want both sides of the picture to be trimmed or formatted to t your TV screen. 4:3 LETTERBOX: If you have a normal TV. In this case, a wide picture with black bands on the upper and lower portions of the TV screen will be displayed. 16:9: wide screen display. Wide Squeeze: Set screen mode to 4:3.

Angle Mark It displays current angle setting information on the right hand corner of the TFT screen if available on the disc.

OSD Language You can select your own preferred language settings.

Closed Captions Closed captions are data that are hidden in the video signal of some discs. Before you select this function, please ensure that the disc contains closed captions information and your TV set also has this function.

Screen Saver This function is used to turn the screen saver On or Off.

Auto Standby (Automatic stand-by) This function makes it possible to automatically put the device into standby mode after 3 or 4 hours. 3 HOURS (3 hours): The device will automatically go into standby mode after 3 hours have passed from the time that any button was pressed. 4 HOURS (4 hours): The device will automatically go into standby mode after 4 hours have passed from the time that any button was pressed. OFF (Off): The automatic standby function will be deactivated.

12 EN

Setup Menu Setting

Audio Setup Page

Downmix This option allows you to set the stereo analog output of your DVD Player. LT/RT: Select this option if your DVD Player is connected to a

Dolby Pro Logic decoder. Stereo: Select this option when output delivers sound from only

the two front speakers.

Dolby digital The options included in Dolby Digital Setup are: Dual Mono and Dynamic.

Dual Mono Stereo: Left mono sound will send output signals to Left speaker

and Right mono sound will send output signals to Right speaker. L-Mono: Left mono sound will send output signals to Left speaker

and Right speaker. R-Mono: Right mono sound will send output signals to Left

speaker and Right speaker. Mix-Mono: Left and Right mixed mono sound will send output

signals to Left and Right speakers.

Dynamic Dynamic range compression.

Video Setup Page

Set Sharpness, Brightness, Contrast, Hue, Saturation.

EN 13

Setup Menu Setting

Preference Page

TV Type Selecting the colour system that corresponds to your TV when AV outputs. This DVD Player is compatible with both NTSC and PAL. PAL - Select this if the connected TV is PAL system. It will change

the video signal of a NTSC disc and output in PAL format. NTSC - Select this if the connected TV is NTSC system. It will

change the video signal of a PAL disc and output in NTSC format. Auto: Change the video signal output automatic according to the

playing disk format.

Audio Select a language for audio (if available).

Subtitle Select a language for subtitle (if available).

Disc Menu Select a language for disc menu (if available).

Parental Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You

can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes.

MPEG4 subtitle Select the MPEG4 subtitle.

Default Restore the factory setting.

Password Setup Page

Password mode Set password mode on/off. If set to off, change parental level will not check password.

14 EN

Password Select the menu password change page.

OLD PASSWORD: Enter the OLD password, (factory setting is 1369), and the cursor will jump automatically to NEW PASSWORD.

NEW PASSWORD: Enter the NEW password. Enter 4 digits from the remote control unit numeric buttons, and the cursor will automatically jump to CONFIRM PASSWORD.

CONFIRM PASSWORD: Con rm the NEW password by entering it again. If the con rmation is incorrect, the cursor will stay in this column. After entering, the correct new password again, the cursor will jump automatically to OK. OK: When cursor is on this button, press ENTER button to con rm setting.

Note: If the password has been changed, the parental and disc lock code will also be changed. The default password (1369) is always active even the password has been changed.

Setup Menu Setting

EN 15

Picture (Picture)

Brightness (Brightness) Set the brightness of the screen. Contrast (Contrast) Set the contrast of the screen. Color (Colours) Set the colours of the screen. English (Language) Set the OSD language.

Screen (Screen) Set the side aspect ratio 16:9 or 4:3.

Settings menu of the side unit

16 EN

Device parameters Item Standard requirements

Power requirements AC 100 120 V, 50/60 Hz Power consumption < 15 W Operating humidity 5 % to 90 % Output VIDEO OUT 1 Vp-p (75 )

AUDIO OUT 1 Vp-p (1 KHz, 0 dB) Audio Speaker: 2 x 1W, headphones output,

coaxial output

System Laser Semiconductor laser, wave length 650 nm

Signal system NTSC / PAL Frequency response 20 Hz to 20 kHz (1 dB) Signal to noise ratio More than 80 dB (ANALOGUE OUT

connectors only) Dynamic range More than 85 dB (DVD/CD)

Note: Design and speci cations are subject to change prior notice.

Battery Parameters Battery Speci cations Output: 7.4 V

Charge/Discharge Time Standard charge time: 3h 4h

Storage and work circumstances 1. Storage circumstances Temperature Humidity 6 months -20 C +45 C 65 20% 1 week -20 C +65 C 65 20%

2. Work circumstances Temperature Humidity Standard charge 0 C +45 C 65 20% Standard discharge -20 C +65 C 65 20%

Parameters and speci cations

EN 17

Maintenance and Service

Refer to the information in this chapter before contacting a service technician. Protect the device against shocks of being hit of dropped We recommend that at least for the devices warranty period

you keep the box and the packaging material. If transporting the device, pack it up in the same way as it came from the factory.

Keeping the exterior surfaces clean. Do not use sprays or volatile solvents near the device. Do not leave the device in contact with rubber or plastic for a long

time - risk of hard to remove stains. Do not use volatile substances in the vicinity of the device, e.g. insecticides.

To clean the device use a soft cloth, if the device is dirtier then you can use a damp cloth with a lukewarm mild detergent solution.

Do not use thinners or solvents - they may damage the surface treatment of the devices case.

We recommend having the player professionally inspected and cleaned after 1000 operational hours (depending on conditions even sooner).

The DVD player is a high-tech, precision device. If the optical pickup lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1000 hours of use. For details, please contact your nearest authorized service centre.

18 EN

Troubleshooting tips (Common) Before calling for service, you can check the following items on

symptoms and solutions.

No sound or distorted sound: Ensure that the equipment is connected properly. Ensure that the input settings for the TV and stereo system are proper.

No picture: Ensure that the equipment is connected properly. Ensure that the input setting for the TV is video. Ensure that the LCD is on.

No play: Condensation has formed: wait about 1 to 2 hours to allow the

player to dry out. This player cant play discs other than DVDs, MP3s and CDs. The disc may be dirty and require cleaning. Ensure that the disc is installed with the label side up.

No remote control: Check the batteries are installed with the correct polarities (+&-). The batteries are depleted: replace them with new ones. Point the remote control unit at the remote control sensor and

operate. Remove the obstacles between the remote control unit and the

remote control sensor. Operate the remote control unit at a distance of not more than 8

meters from the remote control sensor.

No key operation (by the unit and/or the remote control) is effective: Turn the unit off and then back to on. Alternatively, turn off the unit,

disconnect the AC power cord and the re-connect it. (The player may not be operating properly due to lightning, static electricity or some other external factor.)

Troubleshooting tips

Battery does not work Check whether the battery is out of power or in proper connection.

Troubleshooting tips (DVD) Play does not commence even when title is selected: Con rm the Rating settings.

Audio soundtrack and/or subtitle language is not the one selected at the initial settings:

If the audio soundtrack and/or subtitle language does not exist on the disc, the language selected at the initial setting will not be seen/heard.

No subtitles: Subtitles appear only with discs which contain them.

Alternative audio soundtrack (or subtitle) language fail to be selected: An alternative language is not selected with discs which do not

contain more than one language. In the case of some discs, the alternative language cannot

be selected by operating the AUDIO or SUBTITLE button. Try selecting it from the DVD menu if one is available.

Angle cannot be changed: This function is dependent on software availability. Even if a disc

has a number of angles recorded, these angles may be recorded for speci c scenes only.

EN 19

Instructions for the correct disposal of the product

Copyright 2016, Fast R, a.s. 07/2016

The original version is in the Czech language. Address of the manufacturer: FAST R, a.s., ernokosteleck 1621, CZ-251 01 any

20 EN

EN Warranty conditions Warranty card is not a part of the device packaging.

This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty is limited to the following conditions. Warranty is referred only to the customer goods using for common domestic use. The claim for service can be applied either at dealers shop where the product was bought, or at below mentioned authorized service shops. The end-user is obligated to set up a claim immediately when the defects appeared but only till the end of warranty period. The end user is obligated to cooperate to certify the claiming defects. Only completed and clean (according to hygienic standards) product will be accepted. In case of eligible warranty claim the warranty period will be prolonged by the period from the date of claim application till the date of taking over the product by end-user, or the date the end-user is obligated to take it over. To obtain the service under this warranty, end-user is obligated to certify his claim with duly completed following documents: receipt, certificate of warranty, certificate of installation.

This warranty is void especially if apply as follows: Defects which were put on sale. Wear-out or damage caused by common use. The product was damaged by unprofessional or wrong installation, used in contrary to the applicable instruction manual, used in contrary to legal enactment and

common process of use or used for another purpose which has been designed for. The product was damaged by uncared-for or insufficient maintenance. The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood). Defects on functionality caused by low duality of signal, electromagnetic field interference etc. The product was mechanically damaged (e.g. broken button, fall). Damage caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable working conditions (e.g. high temperatures, high humidity,

quakes). Repair, modification or other failure action to the product by unauthorized person. End-user did not prove enough his right to claim (time and place of pu