Sencor SCG 6050SS Coffee Grinder User Manual PDF

08/2018- 1 - Copyright 2018, Fast R, a.s.

EN Electric Coffee Grinder

SCG 6050SS

08/2018- 2 - Copyright 2018, Fast R, a.s.

EN Electric Coffee Grinder Important safety instructions

READ CAREFULLY AND STORE FOR FUTURE USE This appliance may be used by children 8 years of age and older and by persons with physical or mental impairments or by inexperienced persons, if they are properly supervised or have been informed about how to use the product in a safe manner and understand the potential dangers. Children must not play with the appliance. Cleaning and maintenance performed by the user must not be performed by unsupervised children.

If the power cord is damaged, have it replaced at a professional service centre or by a similarly qualified person, this will prevent the creation of a dangerous situation. It is forbidden to use the appliance if it has a damaged power cord.

Warning: Incorrect use may lead to injuries.

Always turn off the appliance and disconnect it from the power socket when not using it and when leaving it without supervision, before assembly, disassembly or cleaning.

This appliance must not be used by children. Keep the appliance and its cord out of reach of children.

This appliance may be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they are properly supervised or have been informed about how to use the product in a  safe manner and understand the potential dangers.

Children must not play with the appliance. This appliance is designed for household use only. It is not intended for use in locations such as:

staff kitchens in stores, offices and other workplaces; hotel or motel rooms and other living areas; agricultural farms; bed and breakfast establishments. The appliance is designed for grinding coffee beans. Do not use it for other purposes.

Do not use the appliance for commercial purposes, in industrial surroundings or outdoors. Do not place the appliance on an electric or gas stove, on the edge of a table, window sill, kitchen sink drainboard or on unstable surfaces. Only place it on an even, dry and stable surface.

08/2018- 3 - Copyright 2018, Fast R, a.s.

Before connecting the appliance to a power socket, check that the rated voltage on its rating label matches the electrical voltage in the power socket.

Do not overfill the coffee bean hopper or fill it with ground or instant coffee, caramelised or otherwise specially modified coffee grains, cocoa beans or other ingredients or items. Otherwise, this could damage the appliance.

Make sure that the appliance is properly assembled before putting it into operation. Make sure that during its operation, no parts of clothing, hair, kitchen utensils or other items enter the coffee bean hopper. The hopper must always be properly closed.

Regularly check the filled level of the ground coffee hopper. Do not go over the designated maximum mark.

To prevent the appliance from overheating, allow it to cool down for approximately 30 minutes after 5 minutes of operation.

Keep the appliance clean. When cleaning it, follow the instructions in chapter Cleaning and maintenance.

To prevent the risk of injury by electrical shock, do not submerge the appliance, power cord or power plug into water or another liquid.

Do not place heavy items on the power cord. Make sure that the power cord does not hang over the edge of a table or that it is not touching a hot surface, and that its plug does not come into contact with water or moisture.

Disconnect the appliance from the power socket by pulling on the plug, never pulling on the power cord. Otherwise, this could damage the power cord or the socket.

It is forbidden to use the appliance if it has a damaged power cord. Do not use the appliance when it is not functioning properly or showing signs of damage.

In order to prevent a  hazardous situation arising, do not repair the appliance yourself or modify it in any way. Have all repairs performed at an authorised service centre. By tampering with the appliance, you risk voiding your legal rights arising from unsatisfactory performance or quality warranty.

08/2018- 4 - Copyright 2018, Fast R, a.s.

SHA 9200WH

16

1

2

4 3

A

7 8

105

6

9

11

12

14

13 15

08/2018- 5 - Copyright 2018, Fast R, a.s.

EN Electric Coffee Grinder User's manual

Prior to using this appliance, please read the users manual thoroughly, even in cases, when one has already familiarised themselves with previous use of similar types of appliances. Only use the appliance in the manner described in this users manual. Keep this users manual in a safe place where it can be easily retrieved for future use.

We recommend saving the original cardboard box, packaging material, purchase receipt and responsibility statement of the vendor or warranty card for at least the duration of the legal liability for unsatisfactory performance or quality. In the event of transportation, we recommend that you pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE APPLIANCE A1 Coffee bean hopper lid A2 Coffee bean hopper with capacity of

approximately 350 g A3 Start/Stop button A4 Ground coffee dial A5 Ground coffee container lid A6 Ground coffee container with

capacity of approximately 150g A7 Coffee bean hopper holder A8 Coffee bean hopper release button

A9 Grind dial enables the selection of 15 grinding fineness levels

A10 Coffee grinder body A11 Ground coffee outlet A12 Space for ground coffee container A13 Upper grinding burr A14 Handle A15 Lower grinding burr A16 Cleaning brush

BEFORE FIRST USE Before first use, take the appliance and its accessories out of the packaging material

and remove all promotional labels and stickers from it. Check that neither the appliance nor any of its parts is damaged.

Place the coffee grinder on an even, dry and clean surface and remove the coffee bean hopper A2. Press the coffee bean hopper release button A8 and simultaneously turn the bean hopper A2 anticlockwise. Pull the hopper A2 out.

Coffee bean hopper A2, coffee bean hopper lid A1, ground coffee container A6 and ground coffee container lid A5 rinse out with warm water with the addition of a small amount of neutral dishwashing detergent. Then thoroughly rinse them out using clean water and dry them.

Wipe the outer surface of the appliance with a lightly dampened sponge and then wipe it dry.

Warning: Never wash the appliance under running water or submerge it in water or another liquid. Never fill the coffee bean hopper with water or another liquid in order to clean it.

OPERATING THE APPLIANCE Place the coffee grinder on an even, dry and clean surface and make sure the power

cord plug is disconnected from the power socket. Check the coffee bean hopper A2 is empty.

Assembling and disassembling of the coffee grinder To assemble the coffee grinder, align the tab on the coffee bean hopper A2 with the

groove on the holder A7, push the hopper A2 down to the holder A7 and turn the hopper A2 clockwise until you feel a slight resistance.

To remove the coffee bean hopper A2 from the coffee grinder, press the coffee bean hopper release button A8 and simultaneously turn the bean hopper A2 anticlockwise. Pull the hopper A2 out.

Note: The coffee grinder is provided by a  safety switch to prevent the coffee grinder from running if the coffee bean hopper A2 is not installed, or this is not installed properly. Before assembling and disassembling, always make sure the power cord plug is disconnected from the power socket.

Filling the coffee bean hopper Pour freshly roasted beans into the coffee bean hopper A2 and close the lid A1. For

the safety reasons, do not leave the hopper A2 open. The coffee beans would also lose their aroma.

Warning: The maximum capacity of the hopper A2 is 350 g. Do not overfill it past the maximum mark. Never fill the coffee bean hopper A2 with ground or instant coffee, caramelised or otherwise specially modified coffee beans, cocoa beans or other items. Otherwise, this could damage the appliance.

Note: If you do not use the coffee beans, remove the hopper A2 from the coffee grinder and pour the coffee beans into the airtight container and store it.

Grinding coffee 1. Fully unwind the power cord and insert the power cord plug to the power socket. 2. The Start/Stop button A3 will be illuminated. 3. Place the lid A5 on the ground coffee container A6 and put the ground coffee

container A6 under the ground coffee outlet A11. The opening of the lid should be aligned with the ground coffee outlet A11 so that the ground coffee falls directly into the ground coffee container A6.

4. Using the dial A9, set the desired grinding fineness level depending on the coffee machine:

levels 1 6 are suitable for espresso type machines; levels 6 8 are suitable for percolator; levels 8 11 are suitable for drip coffee machines; levels 11 15 are suitable for plunger. 5. Using the dial A4, choose the required amount of ground coffee according to

the number of cups you will prepare. You can set the amount from 2 to 10 cups. Moreover, using the dial, you can choose a manual grind for 5 minutes.

6. Press the Start/Stop button A3 and the grinding will start. During the grinding, the Start/Stop button A3 will flash. You can stop the grinding process at any time by pressing the Start/Stop button A3.

7. Once the grinding process has been finished, the coffee grinder will turn off automatically. The Start/Stop button A3 will remain illuminated.

8. If you no longer use the coffee grinder, disconnect the power cord plug from the power socket.

If, during the grinding, the ground coffee container A6 gets full, or the coffee bean hopper A2 gets empty, always stop the operation of the coffee grinder by pressing the Start/Stop A3 button at first, and then disconnect the power cord plug from the power socket. Then empty the container A6, or refill the coffee beans, assembly the coffee grinder, insert the power cord plug to the power socket and turn it on again by pressing the Start/Stop button A3.

Note: If the coffee grinder is operated continuously for 5 minutes, it is important to allow it to cool down for at least 30 minutes. Disconnect the power cord plug from the power socket while the coffee grinder is cooling down. This is a safety precaution to prevent the coffee grinder from possible damage. It is recommended to grind coffee for 90 seconds and then allow the coffee grinder to cool down for 90 seconds before turning on again.

Note: The maximum capacity of the ground coffee container A6 is approximately 150g. After each grind, pour the ground coffee into the airtight container and store it according to the instructions of the coffee bean manufacturer. The ground coffee container A6 supplied with the coffee grinder is not intended for storing ground coffee.

Sleep mode The coffee grinder will automatically enter the sleep mode after 90 seconds of

inactivity.

Recommendations for purchasing and storing coffee To shorten the storage time, purchase coffee beans in smaller packages. Use fresh roasted coffee beans with a  marked roasting date and consume them

within 3 weeks of the roasting date. Store coffee beans in a cool, dark and dry location, ideally in an air-tight container. We recommend grind the coffee beans immediately prior to brewing the coffee

beverage. Coffee that is ground in advance loses its flavour and aroma.

Recommended coffee grinding fineness This appliance is equipped with a 15-level regulation to enable the grinding fineness

to be adjusted to various coffee brewing methods. When the ground coffee is used in espresso type machines, select a  finer grinding level. For brewing percolated coffee, select a coarser grind.

When the ground coffee is used in espresso type machines, and coffee flows out too slowly and its taste is too bitter, it may mean that the coffee beans have been ground too finely and it is necessary to set a coarser grind. On the other hand, if the brewed coffee is flowing out too fast and its taste is bland, it may mean that the coffee grains are too coarsely ground and it is necessary to set a finer grind.

CLEANING AND MAINTENANCE Before cleaning, disconnect the power cord plug from the power socket and allow

the coffee grinder to cool down. For cleaning, do not use cleaning products with an abrasive effect, solvents, etc. that

could damage the appliance. No part of this appliance is intended for washing in a dishwasher.

Warning: To prevent the risk of injury by electrical shock, do not submerge the appliance, power cord or power plug into water or another liquid.

To remove the coffee bean hopper A2 from the coffee grinder, press the coffee bean hopper release button A8 and simultaneously turn the bean hopper A2 anticlockwise. Pull the hopper A2 out.

Pour the ground coffee to the airtight container and unused coffee beans from the hopper A2 pour to the airtight container.

08/2018- 6 - Copyright 2018, Fast R, a.s.

Coffee bean hopper A2, coffee bean hopper lid A1, ground coffee container A6 and ground coffee container lid A5 rinse out with warm water with the addition of a small amount of neutral dishwashing detergent. Then thoroughly rinse them out using clean water and dry them.

Lift the handle A14 and turn the upper grinding burr A13 anticlockwise and remover it from the grinder.

Using the cleaning brush remove the residual coffee power from the upper and lower grinding burr (A13 and A15).

To assemble the grinding burrs, align the grooves on the upper grinding burr A13 with the tabs in the grinding chamber. Push it down and turn it clockwise until you feel a slight resistance.

Warning: Be very careful when handling the grinding burrs. The grinding burrs are sharp and there is a risk of injury.

Wipe the outer surface of the appliance with a lightly dampened sponge and then wipe it dry.

Storage When not using the appliance for an extended period of time, disconnect the power

cord plug from the power socket, allow the appliance to cool down and clean it according to the instructions in chapter Cleaning and maintenance.

Before storing it, check that the appliance and all its accessories are thoroughly clean and dry.

Store the appliance in a  dry, clean and well-ventilated location not exposed to extreme temperatures and out of childrens or animals reach.

TECHNICAL SPECIFICATIONS Rated voltage range ..........................................................................................................220240 V~ Rated frequency.......................................................................................................................5060 Hz Rated power input ........................................................................................................................150 W Noise level ....................................................................................................................................85 dB(A)

The declared noise emission level of the appliance is 85 dB(A), which represents a level A of acoustic power with respect to a reference acoustic power of 1 pW.

Safety class for electrical shock protection: Class II Electrical shock protection is provided by double or heavy-duty insulation.

We reserve the right to change text and technical specifications.

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of used packaging material at a site designated for waste in your municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT This symbol on products or original documents means that used electric or electronic products must not be added to ordinary municipal waste. For proper disposal, renewal and recycling hand over these appliances to determined collection points. Alternatively, in some European Union states or other European countries you may return your appliances to the local retailer when buying an equivalent new appliance. Correct disposal of this product helps save valuable natural resources

and prevents potential negative effects on the environment and human health, which could result from improper waste disposal. Ask your local authorities or collection facility for more details. In accordance with national regulations penalties may be imposed for the incorrect disposal of this type of waste. For business entities in European Union states If you want to dispose of electric or electronic appliances, ask your retailer or supplier for the necessary information. Disposal in other countries outside the European Union This symbol is valid in the European Union. If you wish to dispose of this product, request the necessary information about the correct disposal method from the local council or from your retailer.

This product meets all the basic requirements of EU directives related to it.