Sencor SCA BA88 Alcohol Tester User Manual PDF

1 of 8
1 of 8

Summary of Content for Sencor SCA BA88 Alcohol Tester User Manual PDF

SCA BA88

Pre-calibrated sensor module USERS MANUAL

EN 2

Content

1 Remove old sensor

2 Install new sensor

3 User device reset (no need to use it in case of new sensor)

1. Remove old sensor module

1.1 Slide the power switch to OFF position (red)

1.2 Remove the bottom cover

1.3 Remove the plastic fuse

EN 3

1.4 Remove sensor module

2 Install a new sensor module

2.1 Put the sensor module into the compartment and push it to top position

EN 4

2.2 install the plastic fuse to x the sensor module

2.3 install the cover to the device

2.4 Finish: Slede the power switch to ON position (Green)

EN 5

3. User device reset

1) Turn the device on. ALCO message will be shown.

2) In this mode, press and hold the up and down arrow button and then add the ON/OFF

button. After a few seconds of holding these buttons down, the screen below will be

shown.

3) Using the up button, change the rst number to 1, see gure below and wait.

The number of measurements performed since the last reset will be shown.

4) Then, hold down the ON/OFF for 3 seconds and the instrument will be reset.

The device will automatically return to the initial screen and you can continue to use it.

EN 6

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS Dispose of packaging material at a public waste disposal site.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

The meaning of the symbol on the product, its accessory or packaging indicates

that this product shall not be treated as household waste. Please, dispose of this

product at your applicable collection point for the recycling of electrical & electronic

equipment waste. Alternatively in some states of the European Union or other

European states you may return your products to your local retailer when buying

an equivalent new product. The correct disposal of this product will help save

valuable natural resources and help in preventing the potential negative impact

on the environment and human health, which could be caused as a result of

improper liquidation of waste. Please ask your local authorities or the nearest waste

collection centre for further details. The improper disposal of this type of waste may

fall subject to national regulations for nes.

For business entities in the European Union If you wish to dispose of an electrical or electronic device, request the necessary

information from your seller or supplier.

Disposal in other countries outside the European Union If you wish to dispose of this product, request the necessary information about the

correct disposal method from local government departments or from your seller.

This product meets all the basic EU regulation requirements that relate to it.

Changes to the text, design and technical speci cations may occur without prior notice

and we reserve the right to make these changes.

The original version is in the Czech language.

Address of the manufacturer:

FAST R, a.s., ernokosteleck 1621, any CZ-251 01

EN 7

EN Warranty conditions

Warranty card is not a part of the device packaging.

This product is warranted for the period of 24 months from the date of purchase to the end-user. Warranty

is limited to the following conditions. Warranty is referred only to the customer goods using for common

domestic use. The claim for service can be applied either at dealers shop where the product was bought,

or at below mentioned authorized service shops. The end-user is obligated to set up a claim immediately

when the defects appeared but only till the end of warranty period. The end user is obligated to cooperate

to certify the claiming defects. Only completed and clean (according to hygienic standards) product will

be accepted. In case of eligible warranty claim the warranty period will be prolonged by the period from

the date of claim application till the date of taking over the product by end-user, or the date the end-user

is obligated to take it over. To obtain the service under this warranty, end-user is obligated to certify his

claim with duly completed following documents: receipt, certificate of warranty, certificate of installation.

This warranty is void especially if apply as follows: Defects which were put on sale.

Wear-out or damage caused by common use.

The product was damaged by unprofessional or wrong installation, used in contrary to the applicable

instruction manual, used in contrary to legal enactment and common process of use or used for another

purpose which has been designed for.

The product was damaged by uncared-for or insufficient maintenance.

The product was damaged by dirt, accident of force majeure (natural disaster, fire, and flood).

Defects on functionality caused by low duality of signal, electromagnetic field interference etc.

The product was mechanically damaged (e.g. broken button, fall).

Damage caused by use of unsuitable media, fillings, expendable supplies (batteries) or by unsuitable

working conditions (e.g. high temperatures, high humidity, quakes).

Repair, modification or other failure action to the product by unauthorized person.

End-user did not prove enough his right to claim (time and place of purchase).

Data on presented documents differs from data on products.

Manualsnet FAQs

If you want to find out how the SCA BA88 Sencor works, you can view and download the Sencor SCA BA88 Alcohol Tester User Manual on the Manualsnet website.

Yes, we have the User Manual for Sencor SCA BA88 as well as other Sencor manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Sencor SCA BA88. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sencor SCA BA88 Alcohol Tester User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sencor SCA BA88 Alcohol Tester User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sencor SCA BA88 Alcohol Tester User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sencor SCA BA88 Alcohol Tester User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sencor SCA BA88 Alcohol Tester User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.