Seat Alhambra Edition 07.08 2008 Minivan Owner's Manual PDF
Summary of Content for Seat Alhambra Edition 07.08 2008 Minivan Owner's Manual PDF
A L H A M B R A
ow ne
r s
m an
ua l
In gl
s S
91 55
1A B
A 20
( 07
.0 8)
( G
T9 )
auto emocin A lh
a m
b ra
In
g l
s (0
7 .0
8 )
auto emocin
S9 15
51 AB
A2 0
Portada ALHAMBRA.qxd 10/9/08 12:18 Pgina 3
SEAT S.A. se preocupa constantemente por mantener todos sus tipos y modelos en un desarrollo continuo. Por ello le rogamos que com- prenda que, en cualquier momento, puedan producirse modificaciones del vehculo entregado en cuanto a la forma, el equipamiento y la tcnica. Por esta razn, no se puede derivar derecho alguno basndose en los datos, las ilustraciones y descripciones del presente Manual.
Los textos, las ilustraciones y las normas de este manual se basan en el estado de la informacin en el momento de la realizacin de la impresin. Salvo error u omisin, la informacin recogida en el presente manual es vlida en la fecha de cierre de su edicin.
No est permitida la reimpresin, la reproduccin o la traduccin, total o parcial, sin la autorizacin escrita de SEAT.
SEAT se reserva expresamente todos los derechos segn la ley sobre el "Copyright". Reservados todos los derechos sobre modificacin.
Este papel est fabricado con celulosa blanqueada sin cloro.
SEAT S.A. - Reimpresin: 15.09.08
Portada ALHAMBRA_interior.qxd 10/9/08 11:59 Pgina 1
fully to familiarise yourself with
l contribute to preserve its value.
s and parts exchange.
as this should be kept with the
alhambra_ingles_0708 Seite 1 Mittwoch, 10. September 2008 10:55 10
Foreword This owner's manual and the corresponding supplements should be read care
your vehicle.
Also, the regular care and maintenance and correct handling of the vehicle wil
For safety reasons, note the information concerning accessories, modification
If selling the vehicle, give all of the onboard documentation to the new owner
vehicle.
alhambra_ingles_0708 Seite 2 Mittwoch, 10. September 2008 10:55 10
Contents 3
oof carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ooling and heating box* . . . . . . . . . . . . . . . . . .
ting, Ventilation and Air conditioning . .
limatronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ddress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
afety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
nition lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
tarting and stopping the engine . . . . . . . . . . .
anual gearbox . . . . . . . . . . . . . . . . . . . . . . . . . .
utomatic gearbox . . . . . . . . . . . . . . . . . . . . . . .
andbrake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
arking distance warning system* . . . . . . . . . . .
ruise control system (CCS) . . . . . . . . . . . . . . . .
s and Maintenance . . . . . . . . . . . . .
lligent technology . . . . . . . . . . . . . . . . . . . . .
rakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ing and the environment . . . . . . . . . . . . . .
unning-in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xhaust gas emission control system . . . . . . . .
conomical and environmentally friendly driving
riving abroad . . . . . . . . . . . . . . . . . . . . . . . . . . .
railer towing . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ning and caring for your vehicle . . . . . . .
eneral notes . . . . . . . . . . . . . . . . . . . . . . . . . . .
are of the vehicle exterior . . . . . . . . . . . . . . . . .
are of the vehicle interior . . . . . . . . . . . . . . . . .
148
149
152
152
160
160
161
162
164
166
167
173
174
176
179
179
179
185
185
186
187
189
190
193
193
194
199
alhambra_ingles_0708 Seite 3 Mittwoch, 10. September 2008 10:55 10
Contents
The structure of this manual . . . . .
Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety First . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safe driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brief introduction . . . . . . . . . . . . . . . . . . . . . . . .
Proper sitting position for occupants . . . . . . . . .
Pedal area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stowing luggage . . . . . . . . . . . . . . . . . . . . . . . . .
Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Why wear seat belts? . . . . . . . . . . . . . . . . . . . . . .
Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Belt tension devices . . . . . . . . . . . . . . . . . . . . . .
Airbag system . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brief introduction . . . . . . . . . . . . . . . . . . . . . . . .
Front airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Side airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Curtain airbags . . . . . . . . . . . . . . . . . . . . . . . . . .
Deactivating airbags* . . . . . . . . . . . . . . . . . . . . .
Child safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brief introduction . . . . . . . . . . . . . . . . . . . . . . . .
Child seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Installation of child seats in vehicle seats . . . . .
Integrated child seat . . . . . . . . . . . . . . . . . . . . . .
Operating instructions . . . . . . . . . . . .
Cockpit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display in the instrument panel . . . . . . . . . . . . .
Warning lamps . . . . . . . . . . . . . . . . . . . . . . . . . . .
On board computer with multifunction display .
Steering wheel controls . . . . . . . . . . . . . . . . . . .
Telephone* . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Unlocking and locking . . . . . . . . . . . . . . . . . . . .
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Central locking . . . . . . . . . . . . . . . . . . . . . . . . . . .
Key with remote control . . . . . . . . . . . . . . . . . . .
Anti-theft alarm system . . . . . . . . . . . . . . . . . . . .
Tailgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sliding/tilting sun roof . . . . . . . . . . . . . . . . . . . .
Lights and visibility . . . . . . . . . . . . . . . . . . . . . . .
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Visibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windscreen washers . . . . . . . . . . . . . . . . . . . . . .
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Seats and stowage . . . . . . . . . . . . . . . . . . . . . . .
The importance of correct seat adjustment . . . .
Head restraints . . . . . . . . . . . . . . . . . . . . . . . . . .
Front seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stowage compartments . . . . . . . . . . . . . . . . . . .
Ashtrays, cigarette lighter and electrical sockets
AUX-IN Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hazard warning triangles and first aid kit . . . . .
Luggage compartment . . . . . . . . . . . . . . . . . . . .
R
C
Hea
C
Driv
A
S
Ig
S
M
A
H
P
C
Tip
Inte
B
Driv
R
E
E
D
T
Clea
G
C
C
5
6
7
7
7
9
14
14
17
17
19
22
30
32
32
36
39
41
43
45
45
47
49
52
61
61
61
62
67
70
79
84
85
87
87
88
94
96
98
101
104
108
108
114
116
118
121
121
122
124
126
133
139
142
143
143
Contents4
alhambra_ingles_0708 Seite 4 Mittwoch, 10. September 2008 10:55 10
Accessories, parts replacement and
modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Accessories and parts . . . . . . . . . . . . . . . . . . . . .
Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Roof aerial* . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mobile telephones and two-way radios . . . . . . .
Retrofitting a towing bracket . . . . . . . . . . . . . . .
Checking and refilling levels . . . . . . . . . . . . . .
Refilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Petrol types . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diesel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Working in the engine compartment . . . . . . . . .
Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Washer fluid and windscreen wiper blades . . . .
Brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If and when . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Vehicle tools*, spare wheel*, breakdown set* and
towing bracket . . . . . . . . . . . . . . . . . . . . . . . . . . .
Breakdown set* . . . . . . . . . . . . . . . . . . . . . . . . . .
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparation of anti-puncture kit . . . . . . . . . . . . .
Sealing and inflating tyres . . . . . . . . . . . . . . . . .
Changing a wheel . . . . . . . . . . . . . . . . . . . . . . . .
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing a light . . . . . . . . . . . . . . . . . . . . . . . . .
Jump-starting . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Towing and tow-starting . . . . . . . . . . . . . . . . . . .
Lifting the vehicle . . . . . . . . . . . . . . . . . . . . . . . .
Technical Data . . . . . . . . . . . . . . . . . . . . . . .
General notes on the technical data . . . . . . .
What you should be aware of . . . . . . . . . . . . . . .
How are the figures measured? . . . . . . . . . . . . .
Towing a trailer . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking fluid levels . . . . . . . . . . . . . . . . . . . . . .
Petrol engine 2.0l 85 kW (115 bhp) 6 gear . . . .
Petrol engine 2.0 litre 85 kW (115 hp). Automatic
Petrol engine 1.8l 110 kW (150 bhp) 6 gear . . .
Petrol engine 1.8l 110 kW (150 bhp). Automatic
Petrol engine 2.8l VR6150 kW (204 bhp) 6 gear
Petrol engine 2.8l VR6 150 kW (204 bhp)
Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Petrol engine 2.8l VR6150 kW (204 bhp) 6 gear
four-wheel drive . . . . . . . . . . . . . . . . . . . . . . . . .
Diesel engine 1.9l TDI 85 kW (115 bhp) 6 gears
four-wheel drive . . . . . . . . . . . . . . . . . . . . . . . . .
Diesel engine 1.9l TDI 85 kW (115 bhp) 6 gears
Diesel engine 1.9 TDI 85 kW (115 bhp).
Automatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diesel engine 2.0l TDI 103 kW (140 bhp) 6 gears
Diesel engine 2.0 TDI 103 kW (140 bhp) 6 gears.
Ecomotive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions and capacities . . . . . . . . . . . . . . . .
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
202
202
202
203
203
204
206
206
207
207
209
212
216
218
221
223
225
231
231
234 234
234
235
236
241
245
249
252
255
257
257
257
259
260
260
262
262
263
264
266
267
269
270
272
273
275
276
278
279
281
283
The structure of this manual 5
The structure of this manual Before reading this manual it must be understood This manual contains a description of the vehicle equipment at the time of
publication. Some of the equipment described here will not be available until
a later date, or is available only in certain markets.
Because this is a general manual for the ALHAMBRA, some of the equipment and functions that are described in this manual are not included in all types or variants of the model; they may vary or be modified depending on the technical requirements and on the market; this is in no way deceptive adver- tising.
The illustrations are intended as a general guide, and may vary from the
equipment fitted in your vehicle in some details.
The direction indications (left, right, front, rear) appearing in this manual
refer to the normal forward working direction of the vehicle except when
otherwise indicated.
The equipment marked with an asterisk* is supplied as standard on certain
versions of the model only, it can be supplied as an option on some models,
or else it is only on sale in certain countries.
All registered marks are indicated with . Even if the copyright symbol
does not appear this does not mean that the mark is not copyrighted.
The section is continued on the following page.
This shows the end of the section.
WARNING
Texts with this symbol contain safety information. They warn you of serious dangers, possibly involving accident or injury.
Caution Texts with this symbol draw your attention to a possible risk of damage to
your vehicle.
For the sake of the environment Texts with this symbol refer to points relevant to the protection of the environ-
ment.
Note Texts preceded by this symbol contain additional information.
alhambra_ingles_0708 Seite 5 Mittwoch, 10. September 2008 10:55 10
Content6
Content This manual is structured to give you the information you need as quickly and
clearly as possible. The contents of this Manual are grouped into relatively
short sections making up chapters (e.g. Air conditioning). The entire
manual is divided into five large parts which are:
1. Safety First Information on the vehicle equipment relating to passive safety such as seat
belts, airbags, seats, etc.
2. Controls and equipment Information about the distribution of controls in the driver position of the
vehicle, about the seat adjustment possibilities, how to create a suitable
climate in the passenger compartment, etc.
3. Tips and Maintenance Advice relating to driving, care and maintenance of your vehicle and certain
problems which you may solve yourself.
4. Technical Data Figures, data, dimensions and measurements (for example fuel consump-
tion) of your vehicle.
5. Alphabetic index At the end of this manual there is a detailed alphabetical index, this will help
you to rapidly find the information you require.
alhambra_ingles_0708 Seite 6 Mittwoch, 10. September 2008 10:55 10
Safe driving 7
Safety Fir Technical Data
s a part of the occupant protection
the risk of injury during an accident.
fety and the safety of your passengers. In the
ty equipment could reduce the risk of injury. The
f the safety equipment in your SEAT:
t belts for all seats,
for driver and passenger,
r the front seats and outer seats in the second
nd passenger,
d passenger,
IX child seats in the outside seats in the second
estraints and
n.
ned above works together to provide you and
t possible protection in accident situations. But
t help you or your passengers if you or your
rect sitting position or do not properly adjust or
alhambra_ingles_0708 Seite 7 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Safety First
Safe driving
Brief introduction
Dear SEAT Driver
Safety first!
This chapter contains important information, tips, suggestions and
warnings that you should read and follow in the interest of your own
safety and the safety of your passengers.
WARNING
This manual contains important information concerning the driver's and passengers' handling of the vehicle. The other booklets in the vehicle wallet also contain further information that you should be aware of for your own safety and for the safety of your passengers.
Ensure that the onboard documentation is kept in the vehicle at all times. This is especially important when lending or selling the vehicle to another person.
Safety equipment
The safety equipment i
system and can reduce
Never gamble with your sa
event of an accident, the safe
following list includes most o
optimised three-point sea
seat belt tension devices
Belt height adjustment fo
row,
frontal airbags for driver a
side airbags for driver an
curtain airbags,
ISOFIX anchorage for ISOF
and third rows,
Height-adjustable head r
adjustable steering colum
The safety equipment mentio
your passengers with the bes
this safety equipment canno
passengers assume an incor
use this equipment.
Safe driving8
propriate child seats and properly
age 45.
ing position. Instruct your passengers
r sitting position page 9.
securely. Instruct your passengers also to
roperly page 17.
fety?
determined by your driving style and
of all occupants.
ble for yourself and your passengers.
r driving safety is affected, you endanger
n the road , for this reason:
be distracted from the traffic around you,
elephone conversations.
riving ability is impaired (e.g. by medica-
d speed limits.
ed as appropriate for road, traffic and
stances, take breaks regularly - at least
alhambra_ingles_0708 Seite 8 Mittwoch, 10. September 2008 10:55 10
Therefore, you have been provided with information about why this equip-
ment is so important, how it protects you, what you have to observe when
using it and how you and your passengers can achieve the greatest possible
benefit from the safety equipment fitted. This manual includes important
warnings that you and your passengers should observe in order to reduce the
risk of injury.
Safety is everyone's business!
Before every trip
The driver bears the responsibility for his passengers and the
operational worthiness of the vehicle.
For your own safety and the safety of your passengers, always note
the following points before every trip:
Ensure that the vehicle's lights and turn signals operate flaw-
lessly.
Check tyre pressure.
Ensure that all windows provide a clear and good view of the
surroundings.
Securely restrain all parcels page 14.
Make sure that no objects can interfere with the pedals.
Adjust front seat, head restraint and mirrors properly for your
size.
Instruct passengers to adjust the head restraints according to
their height.
Protect children with ap
applied seat belts p
Assume the correct sitt
also to assume a prope
Fasten your safety belt
fasten their seat belts p
What affects driving sa
Driving safety is largely
the personal behaviour
As driver, you are responsi
When your concentration o
yourself as well as others o
Do not allow yourself to
e.g. by passengers or t
Never drive when your d
tion, alcohol, drugs).
Observe traffic laws an
Always reduce your spe
weather conditions.
When travelling long di
every two hours.
Safe driving 9
Safety Fir Technical Data
reduce the risk of injury in the event of an
the following adjustments for the driver:
eel so that there is a distance of at least
ering wheel and the centre of your chest
forwards or backwards so that you are able
r, brake and clutch pedals to the floor with
y angled .
ach the highest point of the steering
int so that its upper edge is at the same
head, or as close as possible to the same
r head fig. 2.
n upright position so that your back rests
Fig. 2 Proper head restraint position for driver
alhambra_ingles_0708 Seite 9 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
If possible, avoid driving when you are tired or are under pres-
sure of time.
WARNING
When driving safety is impaired during a trip, the risk of injury and acci- dents increases.
Proper sitting position for occupants
Proper sitting position for driver
The proper sitting position for the driver is important for safe
and relaxed driving.
For your own safety and to
accident, we recommend
Adjust the steering wh
25 cm between the ste
fig. 1.
Move the driver's seat
to press the accelerato
your knees still slightl
Ensure that you can re
wheel.
Adjust the head restra
level as the top of your
level as the top of you
Move the backrest to a
completely against it.
Fig. 1 The proper distance between driver and steering wheel
Safe driving10
for front passenger
st sit at least 25 cm away from the
irbag can provide the greatest
e event that it is triggered.
reduce the risk of injury in the event of an
he following adjustments for the front
er seat back as far as possible .
upright position so that your back rests
nt so that its upper edge is at the same
head, or as close as possible to the same
head page 12.
ot well in front of the front passenger seat.
rrectly page 17.
passenger airbag in exceptional circum-
's seat.
ion of the front passenger can lead to severe
r seat so that there is at least 25 cm between h panel. If you are sitting nearer than 25 cm, tect you properly.
alhambra_ingles_0708 Seite 10 Mittwoch, 10. September 2008 10:55 10
Fasten your seat belt correctly page 17.
Keep both feet in the foot well so that you have the vehicle under
control at all times.
Adjustment of the driver's seat page 121.
WARNING
An incorrect sitting position of the driver can lead to severe injuries.
Adjust the driver's seat so that there is at least 25 cm distance between the centre of the chest and the hub of the steering wheel page 9, fig. 1. If you are sitting nearer than 25 cm, the airbag system cannot protect you properly.
If your physical constitution prevents you from maintaining the minimum distance of 25 cm, contact a qualified workshop. The workshop will help you decide if special specific modifications are necessary.
When driving, always hold the steering wheel with both hands on the outside of the ring at the 9 o'clock and 3 o'clock positions. This reduces the risk of injury when the driver airbag is triggered.
Never hold the steering wheel at the 12 o'clock position, or in any other manner (e.g. in the centre of the steering wheel). In such cases, you may sustain injuries to the arms, hands and head.
To reduce the risk of injury to the driver during sudden braking manoeu- vres or an accident, never drive with the backrest tilted far back! The airbag system and seat belts can only provide optimal protection when the back- rest is in an upright position and the driver is wearing his or her seat belt properly. The further the backrests are tilted to the rear, the greater the risk of injury due to incorrect positioning of the belt web or the incorrect sitting position!
Adjust the head restraint properly to achieve optimal protection.
Proper sitting position
The front passenger mu
dash panel so that the a
possible protection in th
For your own safety and to
accident, we recommend t
passenger:
Move the front passeng
Move the backrest to an
completely against it.
Adjust the head restrai
level as the top of your
level as the top of your
Keep both feet in the fo
Fasten your seat belt co
It is possible to deactivate the
stances page 24.
Adjusting the front passenger
WARNING
An incorrect sitting posit injuries.
Adjust the front passenge your breastbone and the das the airbag system cannot pro
Safe driving 11
Safety Fir Technical Data
int so that its upper edge is at the same
r head.
ootwell in front of the individual seat.
securely.
ld restraint system when you take children
ividual seats are not sitting properly, they s.
t properly to achieve maximum protection.
rovide optimal protection when the backrests upright position and the passengers are perly. If passengers on the individual seats are ition, the risk of injury due to incorrect posi- ases.
for passengers in the rear seats
seats must sit up straight, keep their
d wear their seat belts properly.
y in the event of a sudden braking
t, passengers on the rear bench seat must
the correct position.
alhambra_ingles_0708 Seite 11 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
If your physical constitution prevents you from maintaining the minimum distance of 25 cm, contact a qualified workshop. The workshop will help you decide if special specific modifications are necessary.
Always keep your feet in the foot well when the vehicle is moving; never rest them on the instrument panel, out the window or on the seat. An incor- rect sitting position exposes you to an increased risk of injury in the event of a braking manoeuvre or an accident. If the airbag is triggered, you could sustain severe injuries due to an incorrect sitting position.
To reduce the risk of injury to the front passenger during sudden braking manoeuvres or an accident, never travel with the backrest tilted far back! The airbag system and seat belts can only provide optimal protection when the backrest is in an upright position and the front passenger is wearing his or her seat belt properly. The further the backrests are tilted to the rear, the greater the risk of injury due to incorrect positioning of the belt web or the incorrect sitting position!
Adjust the head restraint properly to achieve maximum protection.
Correct sitting position for passengers in the rear seats
Passengers in the individual seats must sit up straight, keep
their feet in the footwells and wear their seat belts properly.
To reduce the risk of injury in the event of a sudden braking
manoeuvre or an accident, passengers in the individual seats must
observe the following:
The backrest of the 3-seat seat bench must be in the upright
position and securely engaged in this position.
Adjust the head restra
level as the top of you
Keep both feet in the f
Fasten your safety belt
Use an appropriate chi
in the vehicle.
WARNING
If the passengers on the ind could sustain severe injurie
Adjust the head restrain
The seat belts can only p are properly engaged in the wearing their seat belts pro not sitting in an upright pos tioning of the belt web incre
Correct sitting position
Passengers in the rear
feet in the foot well s an
To reduce the risk of injur
manoeuvre or an acciden
observe the following:
Adjust the headrest to
WARNING (continued)
Safe driving12
ead restraints
restraints are an important part of
can reduce the risk of injuries in
s.
Fig. 3 Properly adjusted head restraint viewed from the front
Fig. 4 Properly adjusted head restraint viewed from the side
alhambra_ingles_0708 Seite 12 Mittwoch, 10. September 2008 10:55 10
Keep both feet in the foot well in front of the rear seat.
Fasten your seat belt correctly page 17.
Use an appropriate child restraint system when you take children
in the vehicle page 45.
WARNING
If the passengers on the rear seat are not sitting properly, they could sustain severe injuries.
Adjust the head restraint properly to achieve maximum protection.
Seat belts can only provide optimal protection when backrests are in an upright position and the passengers are wearing their seat belts properly. If passengers on the rear seat are not sitting in an upright position, the risk of injury due to incorrect positioning of the belt web increases.
Correct adjustment of h
Properly adjusted head
occupant protection and
most accident situation
Safe driving 13
Safety Fir Technical Data
amples of sitting positions that could be
The list is not complete, but we would like to
.
icle is in motion:
,
r to the rear,
sh panel,
h,
e of a seat,
w,
a window,
dash panel,
surface of a seat,
,
hout wearing the seat belt,
the luggage compartment.
sition increases the risk of severe injuries.
sition exposes the occupants to severe injuries n occupant who has assumed an incorrect
, assume the proper sitting position and main- efore every trip, instruct your passengers to
osition and to maintain it during the trip osition for occupants.
alhambra_ingles_0708 Seite 13 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Adjust the head restraint properly to achieve maximum protection.
Adjust the head restraint so that its upper edge is at the same
level as the top of your head, or as close as possible to the same
level as the top of your head and, at the very least, at eye level
page 12, fig. 3 and page 12, fig. 4.
WARNING
Travelling with the head restraints removed or improperly adjusted increases the risk of severe injuries.
Incorrectly adjusted head restraints could result in death in the event of a collision or accident.
Incorrectly adjusted head restraints also increase the risk of injury during sudden or unexpected driving or braking manoeuvres.
The head restraints must always be adjusted according to the occu- pant's size.
Examples of incorrect sitting positions
An incorrect sitting position can lead to severe injuries to
occupants.
Seat belts can provide optimal protection only when the belt webs
are properly positioned. Incorrect sitting positions substantially
reduce the protective function of seat belts and increase the risk of
injury due to incorrect belt web position. As the driver, you are
responsible for all vehicle occupants, especially children.
Never permit anyone to assume an incorrect sitting position in
the vehicle while travelling .
The following list contains ex
dangerous for all occupants.
make you aware of this issue
Therefore, whenever the veh
Never stand in the vehicle
never stand on the seats,
never kneel on the seats,
never tilt your backrest fa
never lean against the da
never lie on the rear benc
never sit on the front edg
never sit sideways,
never lean out of a windo
never put your feet out of
never put your feet on the
never put your feet on the
never travel in a foot well
never travel on a seat wit
never carry any person in
WARNING
Every incorrect sitting po
Sitting in an incorrect po if airbags deploy, striking a sitting position.
Before the vehicle moves tain it throughout the trip. B assume the proper sitting p page 9, Proper sitting p
Safe driving14
r side
used which can be securely fastened
ot impair operation of the pedals.
ats are securely fastened during the trip
pedals .
ve the pedals clear and which are secured to
ou can obtain suitable floor mats from a quali-
ed, you could cause an accident. Risk of
s are always securely attached.
or other floor coverings over the original floor edal area and could obstruct the pedals. Risk
mpartment
ose objects must be safely secured in
nt.
hift back and forth could impair the
aracteristics of the vehicle by shifting the
alhambra_ingles_0708 Seite 14 Mittwoch, 10. September 2008 10:55 10
Pedal area
Pedals
The operation and freedom of movement of all pedals must
never be impaired by objects or floor mats.
Ensure that you can always press the accelerator, brake and
clutch pedals unimpaired to the floor.
Ensure that the pedals can return unimpaired to their initial posi-
tions.
Use only floor mats which leave the pedal area free and can be securely
fastened in the foot well.
If a brake circuit fails, the brake pedal must be free to move further than
normal in order to bring the vehicle to a stop.
Wear suitable shoes
Always wear shoes which support your feet properly and give you a good feel
for the pedals.
WARNING
Restricting pedal operation can lead to critical situations while driving.
Never place objects in the driver foot well. An object could move into the pedal area and impair pedal operation. In the event of a sudden driving or braking manoeuvre, you will not be able to operate the brake, clutch or accelerator pedal. Risk of accident!
Floor mats on the drive
Only floor mats may be
in the foot well and do n
Ensure that the floor m
and do not obstruct the
Only use floor mats which lea
prevent them from slipping. Y
fied dealership.
WARNING
If the pedals are obstruct serious injuries.
Ensure that the floor mat
Never lay or fit floor mats mats. This would reduce the p of accident.
Stowing luggage
Loading the luggage co
All luggage and other lo
the luggage compartme
Unsecured objects which s
driving safety or driving ch
centre of gravity.
Safe driving 15
Safety Fir Technical Data
in trapped without help and there is a mortal
lay in or around the vehicle. Close and lock doors when you leave the vehicle. Before you that there are no adults or children in the
ers in the luggage compartment. Every belted in page 17.
cle helps reduce fogging of the windows. Used
on slits in the side trim of the luggage compart-
tion slits are never covered.
ad to the fastening rings are commercially
rings in the luggage compartment
ecure luggage and other objects.
d undamaged straps to secure luggage
e fastening rings in Loading the
on page 14.
ings to attach the straps.
alhambra_ingles_0708 Seite 15 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Distribute the load evenly in the luggage compartment.
Lay and stow heavy luggage as far forward as possible in the
luggage compartment.
Stow heavy luggage as low as possible in the luggage compart-
ment.
Secure heavy objects to the fitted fastening rings page 15.
WARNING
Loose luggage and other objects in the luggage compartment can cause serious injuries.
Always stow objects in the luggage compartment and secure them on the fastening rings.
Use suitable specialist straps to secure heavy objects.
During sudden manoeuvres or accidents, loose objects can be thrown forward, injuring vehicle occupants or passers-by. This increased risk of injury will be further increased if a loose object is struck by an inflating airbag. If this happens, objects can be transformed into missiles. Risk of fatal injury.
Please note that the centre of gravity may shift when transporting heavy objects; this may affect the vehicle's handling and lead to an acci- dent. Therefore, it is essential to adjust your speed and driving style accordingly, to avoid accidents.
Never exceed the allowed axle loads or allowed maximum weight. If the allowed axle load or the allowed total weight is exceeded, the driving char- acteristics of the vehicle may change, leading to accidents, injuries and damage to the vehicle.
Never leave your vehicle unattended, especially when the tailgate is open. Children could climb into the luggage compartment closing the door
behind them; they will rema risk.
Never allow children to p both the tailgate and all the lock the vehicle, make sure vehicle.
Never transport passeng passenger must be properly
Note Air circulation in the vehi
air escapes through ventilati
ment. Ensure that the ventila
Straps for securing the lo
available.
Fastening rings
There are four fastening
which can be used to s
Always use suitable an
and other objects to th
luggage compartment
Pull up the fastening r
WARNING (continued)
Safe driving16
alhambra_ingles_0708 Seite 16 Mittwoch, 10. September 2008 10:55 10
The retainers for the detachable seat belts for the third row of seats and the
floor anchorings for the seats can be used as fastening rings for items of
luggage.
During a collision or an accident, even small and light objects can build up so
much energy that they can cause very severe injuries. The amount of kinetic
energy depends on the speed of the vehicle and the weight of the object.
The most significant factor, however, is the speed of the vehicle.
Example: An object weighing 4.5 kg is lying unsecured in the vehicle. During
a frontal collision at a speed of 50 km/h, this object generates a force corre-
sponding to 20 times its weight. That means that the effective weight of the
object increases to about 90 kg. You can imagine the severity of the injuries
which might be sustained if this projectile strikes an occupant as it flies
through the passenger compartment. This increased risk of injury will be
further increased if a loose object is struck by an inflating airbag.
WARNING
If pieces of baggage or other objects are secured to the fastening rings with inappropriate or damaged retaining cords, injuries could result in the event of braking manoeuvres or accidents.
To prevent pieces of luggage or other objects from flying forward, always use appropriate retaining cords which are secured to the fastening rings.
Never secure a child seat on the fastening rings.
Seat belts 17
Safety Fir Technical Data
er places, two individual front seats and three
rear seats are fitted with a three-point automatic
two seats in the front, three seats in the second
row.
ople than there are seats available in the
hicle must properly fasten and wear the seat eat. Children must be protected with an appro- .
*
as a reminder to the driver to fasten
e:
securely.
alhambra_ingles_0708 Seite 17 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Seat belts
Introduction
Before driving: remember your seat belt!
Properly worn seat belts can save lives!
In this chapter you will learn why seat belts are so important, how
they work and how to properly fasten, adjust and wear them.
Read and observe all the information as well as the warnings in
this chapter.
WARNING
If the seat belts are worn incorrectly or not at all, the risk of severe inju- ries increases.
Properly worn seat belts can reduce severe injuries in the event of sudden braking manoeuvres or accidents. Therefore, you and your passen- gers should always wear the seat belts properly as long as the vehicle is in motion.
Pregnant women or persons with physical disabilities must also use seat belts. Like all other occupants, these persons can also sustain severe injuries if they are not wearing their seat belts properly.
Number of seats
Vehicles with five seats
Your vehicle has five passeng
places on the rear seat.
The front seats and the outer
seat belt.
Vehicles with seven seats*
The vehicle has seven seats,
row and two seats in the third
WARNING
Never transport more pe vehicle.
Every occupant in the ve belt belonging to his or her s priate child restraint system
Seat belt warning lamp
The warning lamp acts
the seat belt.
Before starting the vehicl
Fasten your safety belt
Seat belts18
alhambra_ingles_0708 Seite 18 Mittwoch, 10. September 2008 10:55 10
Instruct your passengers to fasten their seat belts properly before
driving off.
Protect children by using child seats of the correct height for the
age of the child.
The warning lamp in the combi-instrument lights up if the driver seat belt
is not fastened when the ignition is switched on. In addition, an acoustic
signal can also be heard for a couple of seconds.
The warning lamp* does not go out until the driver seat belt is fastened
while the ignition is switched on.
Seat belts 19
Safety Fir Technical Data
aws of physics work in the case of a head-on
rts moving fig. 5 there is a certain amount of
rgy, both in the vehicle and in the occupants.
y depends on the speed of the vehicle and the
sengers. The higher the speed and the greater
there is to be released in an accident.
owever, is the speed of the vehicle. If the speed
km/h, for example, the kinetic energy increases
ur example are not restrained by seat belts, the
gy has to be absorbed at the point of impact
50 km/h, the forces acting on bodies in a colli-
nne (1,000 kg). At greater speed these forces
belts are not attached to the vehicle. In a
inue to move forward at the speed their vehicle
Fig. 6 The vehicle hits the wall: the occupants are not wearing seatbelts
alhambra_ingles_0708 Seite 19 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Why wear seat belts?
Frontal collisions and the laws of physics
In the event of a frontal collision, a large amount of kinetic
energy is generated.
It is easy to explain how the l
collision: When a vehicle sta
energy known as kinetic ene
The amount of kinetic energ
weight of the vehicle and pas
the weight, the more energy
The most significant factor, h
doubles from 25 km/h to 50
by a factor of four.
Because the passengers in o
entire amount of kinetic ener
fig. 6.
Even at speeds of 30 km/h to
sion can easily exceed one to
are even higher.
Passengers not wearing seat
frontal collision they will cont
Fig. 5 Vehicle about to hit a wall: the occupants are not wearing seatbelts
Seat belts20
acting on the body in a collision are so great
oneself with one's hands. In a frontal collision,
wn forward and will make violent contact with
d, windscreen or whatever else is in the way
stitute for the seat belts. When deployed,
al protection. All occupants (including the
elts properly during the trip. This will reduce
e event of an accident regardless of whether
.
ered only once. To achieve the best possible
always be worn properly so that you will be
h no airbag is deployed.
passengers to wear seat belts properly, as they
ward violently in an accident. Rear passengers
anger not only themselves but also the front
Fig. 8 The unbelted rear passenger is thrown forward violently, hitting the driver wearing a seat belt.
alhambra_ingles_0708 Seite 20 Mittwoch, 10. September 2008 10:55 10
was travelling just before the impact. This example applies not only to frontal
accidents, but to all accidents and collisions.
The danger of not using the seat belt
Many people believe that the occupants can protect them-
selves with their hands in a minor collision, this is false.
Even at low speeds the forces
that it is not possible to brace
unbelted passengers are thro
the steering wheel, dashboar
fig. 7.
The airbag system is not a sub
airbags provide only addition
driver) must be wearing seat b
the risk of severe injuries in th
an airbag is fitted for the seat
Note that airbags can be trigg
protection, the seat belt must
protected in accidents in whic
It is also important for the rear
could otherwise be thrown for
who do not use seat belts end
occupants fig. 8.
Fig. 7 A driver not wearing a seat belt is thrown forward violently.
Seat belts 21
Safety Fir Technical Data
n seat belts before every trip, even when "just
wear their seat belts as well. Accident statistics
at belts to be an effective means of substantially
d improving the chances of survival in a serious
rly worn seat belts improve the protection
ent of an accident. For this reason, wearing a
most countries.
ipped with airbags, the seat belts must be
airbags, for example, are only triggered in some
irbags will not be triggered during minor frontal
ns, rear collisions, rolls or accidents in which the
e control unit is not exceeded.
wear your seat belt and ensure that your
eir seat belts properly before you drive off!
seat belts
rrectly, they can reduce the risk of
elt as described in this booklet.
lts can be fastened at all times and are not
incorrectly or not at all, the risk of severe inju- rotection from seat belts can be achieved only
alhambra_ingles_0708 Seite 21 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Seat belts protect
Passengers not wearing seat belts risk severe injuries in the
event of an accident.
Properly worn seat belts hold the vehicle occupants in the correct sitting posi-
tions and substantially reduce the kinetic energy in the event of an accident.
Seat belts also help to prevent uncontrolled movements that could lead to
severe injuries. In addition, properly worn seat belts reduce the danger of
being thrown from the car.
Passengers wearing their seat belts correctly benefit greatly from the ability
of the belts to absorb kinetic energy. The front crumple zones and other
passive safety features (such as the airbag system) are also designed to
absorb the kinetic energy generated in a collision. Taken together, all these
features reduce the forces acting on the occupants and consequently the risk
of injury.
Our examples describe frontal collisions. Of course, properly worn seat belts
reduce substantially the risk of injury in all other types of accidents. This is
why it is so important to faste
driving around the corner".
Ensure that your passengers
have shown properly worn se
reducing the risk of injury an
accident. Furthermore, prope
provided by airbags in the ev
seat belt is required by law in
Although your vehicle is equ
fastened and worn. The front
frontal accidents. The front a
collisions, minor side collisio
airbag trigger threshold in th
Therefore, you should always
passengers have fastened th
Safety notes on using
If seat belts are used co
injury in an accident.
Always wear the seat b
Ensure that the seat be
damaged.
WARNING
If the seat belts are worn ries increases. The optimal p if you use them properly.
Fig. 9 Driver wearing the seat belt properly: is secured by the belt in sharp braking
Seat belts22
damaged seat belt yourself. The seat belts ified in any way.
ean, otherwise the retractors may not work
buckle)
nt seats and the seats in the second
ed using one buckle.
its full protection if the belt web is not
Fig. 10 Belt buckle and latch plate of seat belt
alhambra_ingles_0708 Seite 22 Mittwoch, 10. September 2008 10:55 10
Fasten your seat belt before every trip - even when driving in town. That applies also to your front and rear passengers danger of injury!
The seat belt cannot offer its full protection if the belt web is not posi- tioned correctly.
Never allow two passengers (even children) to share the same seat belt.
Keep both feet in the foot-well in front of your seat as long as the vehicle is in motion.
Never unbuckle a seat belt while the vehicle is in motion. Risk of fatal injury.
The belt webbing must never be twisted while it is being worn.
The belt webbing should never lie on hard or fragile objects (such as glasses or pens, etc.) because this can cause injuries.
Do not allow the seat belt to be damaged or jammed, or to rub on any sharp edges.
Never wear the seat belt under the arm or in any other incorrect posi- tion.
Loose, bulky clothing (such as an overcoat over a jacket) impairs the proper fit and function of the belts, reducing their capacity to protect.
The slot in the seat belt buckle must not be blocked with paper or other objects, as this can prevent the latch plate from engaging securely.
Never use seat belt clips, retaining rings or similar instruments to alter the position of the belt webbing.
Frayed or torn seat belts or damage to the connections, belt retractors or parts of the buckle could cause severe injuries in the event of an acci- dent. Therefore, you must check the condition of all seat belts at regular intervals.
Seat belts which have been worn in an accident and stretched must be replaced by a qualified workshop. Renewal may be necessary even if there is no apparent damage. The belt anchorage should also be checked.
Do not attempt to repair a must not be removed or mod
The belts must be kept cl properly.
Seat belts
Fastening seat belt (one
The seat belts on the fro
and third row are fasten
The seat belt cannot offer
positioned correctly.
WARNING (continued) WARNING (continued)
Seat belts 23
Safety Fir Technical Data
ith two buckles)
tre seat in the second row of seats is
kles.
ad restraint correctly.
e tongue fig. 11 is pulled down.
to the buckle belonging to the seat and
securely locked with an audible click.
elt to pull the belt across your lap.
to the buckle belonging to seat and
securely locked with an audible click.
that both latch plates are securely
s.
Fig. 11 Fastening the seat belt on the centre seat in the second row of seats
A1
AA
A2
AB
alhambra_ingles_0708 Seite 23 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Adjust the seat and head restraint correctly.
To fasten the belt, take hold of the latch plate and pull it slowly
across your chest and lap .
Insert the latch plate into the buckle for the appropriate seat and
push it down until it is securely locked with an audible click
page 22, fig. 10.
Pull the belt to ensure that the latch plate is securely engaged in
the buckle.
Every seat belt is equipped with an automatic belt retractor on the shoulder
belt. Full freedom of movement is permitted when the shoulder belt is pulled
slowly. However, during sudden braking, during travel in mountains or bends
and during acceleration, the automatic retractor on the shoulder belt is
locked.
The automatic belt retractors on the front seats are fitted with belt tension
devices.
WARNING
An incorrectly worn seat belt web can cause severe injuries in the event of an accident.
The seat belts offer best protection only when the backrests are in an upright position and the seat belts have been fastened properly.
Never put the latch plate in the buckle of another seat. If you do this, the seat belt will not protect you properly and the risk of injury is increased.
If an occupant is incorrectly belted in, the belt cannot protect him or her properly. An incorrectly positioned belt web can cause extremely severe injuries.
Fastening seat belts (w
The seat belt for the cen
fastened using two buc
Adjust the seat and he
Pull the belt so that th
Insert latch plate in
push it down until it is
Use latch plate of the b
Insert latch plate in
push it down until it is
Pull the belt to ensure
engaged in the buckle
A1
A2
Seat belts24
ximum protection only when they are
Fig. 12 Correct belt web and head restraint posi- tions, viewed from front
Fig. 13 Correct belt web and head restraint posi- tions, viewed from side
alhambra_ingles_0708 Seite 24 Mittwoch, 10. September 2008 10:55 10
The seat belt for the centre seat in the second row of seats has a belt retractor
fitted in the car roof. Full freedom of movement is permitted when the
shoulder belt is pulled slowly. However, during sudden braking, during travel
in mountains or bends and during acceleration, the automatic retractor on
the seat belt is locked.
WARNING
An incorrectly worn seat belt web can cause severe injuries in the event of an accident.
The seat belts offer best protection only when the backrests are in an upright position and the seat belts have been fastened properly.
Never put the latch plate in the buckle of another seat. If you do this, the seat belt will not protect you properly and the risk of injury is increased.
If an occupant is incorrectly belted in, the belt cannot protect him or her properly. An incorrectly positioned belt web can cause extremely severe injuries.
Note An illustration of how to fasten the seat belts can be found on each buckle.
Seat belt position
Seat belts offer their ma
properly positioned.
Seat belts 25
Safety Fir Technical Data
also fasten their seat belts properly
the unborn child is for the mother to
erly at all times during the pregnancy.
ximum protection only when the belt web
page 24.
nd head restraint correctly page 9.
, pull the belt evenly across your chest and
r the pelvis fig. 14.
to the buckle for the corresponding seat
it is securely locked with an audible click
that the latch plate is securely engaged in
Fig. 14 Positioning seat belts during pregnancy
alhambra_ingles_0708 Seite 25 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
The following features are available to adjust the seat belt in the shoulder
region:
Belt height adjustment for the front seats and the outer seats in the
second row,
front seat height adjustment*.
WARNING
An incorrectly worn seat belt web can cause severe injuries in the event of an accident.
The shoulder part of the seat belt must lie on the centre of the shoulder, never across the neck. The seat belt must lie flat and fit comfortably on the torso
The lap part of the seat belt must lie across the pelvis, never across the stomach. The seat belt must lie flat and fit comfortably on the pelvis Pull the belt tight if necessary to take up any slack.
Read and observe the warnings page 22.
Pregnant women must
The best protection for
wear the seat belt prop
The seat belt provides ma
is properly positioned
Adjust the front seat a
Holding the latch plate
as low as possible ove
Insert the latch plate in
and push it down until
.
Pull the belt to ensure
the buckle.
Seat belts26
or the front seats and the outer seats in
d to adjust the proper belt web position
fig. 15 of the shoulder belt guide in the
nd hold it in this position.
guide up or down until you have the seat
le for your size.
elt guide.
shoulder belt sharply to check that the
elt guide is engaged securely.
ith one buckle)
e unfastened until the vehicle has
Fig. 16 Removing latch plate from buckle
alhambra_ingles_0708 Seite 26 Mittwoch, 10. September 2008 10:55 10
WARNING
An incorrectly worn seat belt web can cause severe injuries in the event of an accident.
For pregnant women, the lap part of the seat belt must lie as low as possible over the pelvis, never across the stomach, and always lie flat so that no pressure is exerted on the abdomen.
Read and observe the warnings page 21.
Belt height adjustment
Using the height adjusters for the front seats and the outer
seats in the second row the position of the seat belts can be
adjusted in the shoulder area according to the height of the
occupant.
The seat belt adjustment f
the second row can be use
at the shoulder.
Press the upper part direction of the arrow a
Move the shoulder belt
belt in a position suitab
Release the shoulder b
After adjusting, pull the
catch on the shoulder b
Unfastening seatbelt (w
The seat belt must not b
come to a standstill.
Fig. 15 Location of the belt height adjuster
Seat belts 27
Safety Fir Technical Data
the belt buckle fig. 17 . The latch
prings out.
the belt buckle . The latch plate is
ut.
hand holding both latches so that the belt
damaging the trim.
hile the vehicle is in motion. If you do, you ng severe or fatal injuries.
A1
A2
alhambra_ingles_0708 Seite 27 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Press the red button on the belt buckle page 26, fig. 16. The
latch plate is released and springs out.
Guide the belt back by hand so that it rolls up easily and the trim
will not be damaged.
WARNING
Never unbuckle a seat belt while the vehicle is in motion. If you do, you increase the risk of sustaining severe or fatal injuries.
Unfastening seat belts (with two buckles)
The seat belt must not be unfastened until the vehicle has
come to a standstill.
Press the red button in
plate is released and s
Press the red button in
released and springs o
Guide the belt back by
rolls up easily without
WARNING
Never unbuckle a seat belt w increase the risk of sustaini
Fig. 17 Unfastening seat belt with two buckles
Seat belts28
k fig. 18 in the direction of the arrow
y pulling down.
the spring hook up and hang the spring
fig. 19 -arrow- in the side trim.
k from the retainer and guide the seat belt
up until the spring hook functions again
if the seat belt is twisted after it has been
te direction and reengage the spring hook
that the hook is engaged properly. The hook the vehicle is in motion if it has not been injury!
alhambra_ingles_0708 Seite 28 Mittwoch, 10. September 2008 10:55 10
Detachable seat belts
The seat belts in the third row of seats can be detached.
Detaching the seat belt
Push the the spring hoo
and remove the hook b
Guide the seat belt with
hook in the retainer
Fitting the seat belt
Remove the spring hoo
down.
Fir the hook and pull it
.
Remove the spring hook again
fitted. Turn it in the appropria
securely.
WARNING
Pull on the seat belt to ensure could disengage itself whilst properly fitted - Risk of fatal
Fig. 18 Retainer with spring hook for the detachable seat belt
Fig. 19 Storage for the detached seat belt
Seat belts 29
Safety Fir Technical Data
t
ers can be used to adjust the position
houlder.
for the front seats and the outer seats in
ed to adjust the proper belt web position
fig. 21 of the shoulder belt guide in the
and hold it in this position.
t guide up or down until you have adjusted
rect position
e shoulder belt sharply to check that the
belt guide is engaged securely.
Fig. 21 Location of the belt height adjuster
alhambra_ingles_0708 Seite 29 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Belt retainer*
WARNING
When the belt for the outer seats in the centre row is removed insert the webbing behind the guide of the side trim fig. 20, in order to lower the backrest without damaging the webbing.
The seat belts must be removed from the holder before removing the individual seats. This means that the belts will not be damaged.
Belt height adjustmen
Seat belt height adjust
of the seat belt at the s
The seat belt adjustment
the second row can be us
at the shoulder.
Press the upper part direction of the arrow
Move the shoulder bel
the seat belt to the cor
After adjusting, pull th
catch on the shoulder
Fig. 20 Belt retainer for outer seats in centre row
Seat belts30
es
sion device
, the seat belts on the front seats are
upants are equipped with belt tension devices.
nsion devices during severe head-on, lateral
seat belt is being worn. This retracts and
ing the forward motion of the occupants.
triggered only once.
ot be triggered in the event of a light frontal,
hicle overturns, or in situations where no large
rear of the vehicle.
are triggered, a fine dust is produced. This is
at there was a fire in the vehicle.
ments must be observed when the vehicle or
scrapped. A qualified workshop is familiar with
pleased to pass on the information to you.
belt tension devices
omponents of the seat belts that are installed
you work on the belt tension devices or remove
when performing other repair work, the seat
nsequence may be that, in the event of an acci-
function incorrectly or not at all.
alhambra_ingles_0708 Seite 30 Mittwoch, 10. September 2008 10:55 10
Incorrectly fastened seat belts
Incorrectly worn seat belts can cause severe injuries.
Seat belts can provide optimal protection only if the belt web is
properly worn. This is particularly true of seat belts with two buckles.
The seat belts must be fastened exactly in the order described in this
chapter. An incorrect sitting position impairs substantially the
protection a seat belt offers and can lead to severe or fatal injuries.
The risk of severe or fatal injuries is especially increased when a
deploying airbag strikes an occupant who has assumed an incorrect
sitting position. As driver, you are responsible for the safety of all
vehicle occupants, especially children. Therefore:
Never permit anyone to assume an incorrect sitting position in
the vehicle while travelling .
WARNING
An incorrectly worn seat belt increases the risk of severe injuries.
Before every trip, instruct your passengers to adjust their seat belts properly and to wear them during the trip.
Read and always observe information and warnings concerning the use of seat belts page 22 and page 27.
Belt tension devic
Function of the belt ten
During a frontal collision
retracted automatically.
The seat belts for the front occ
Sensors will trigger the belt te
and rear collisions only if the
tightens the seat belts, reduc
The belt tension device can be
The belt tension devices will n
side or rear collision, if the ve
forces act on the front, side or
Note If the belt tension devices
normal and is no indication th
The relevant safety require
components of the system are
these regulations and will be
Service and disposal of
The belt tension devices are c
in the seats of your vehicle. If
and install parts of the system
belt may be damaged. The co
dent, the belt tension devices
Seat belts 31
Safety Fir Technical Data
alhambra_ingles_0708 Seite 31 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
So that the effectiveness of the belt tension device is not reduced and that
removed parts do not cause any injuries or environmental pollution, regula-
tions, which are known to the qualified workshops, must be observed.
WARNING
If repairs are not carried out by a professional, or if the belt tension devices are used incorrectly, the risk of severe or fatal injuries increases. The belt tension devices may fail to trigger or may trigger in the wrong circumstances.
Never attempt to repair, adjust, remove or install parts of the belt tension devices or seat belts.
The belt tension device and seat belt including its automatic retractor cannot be repaired.
Any work on the belt tension devices and seat belts, including the removal and refitting of system parts in conjunction with other repair work, must be performed by a qualified workshop only.
The belt tension devices will only provide protection for one accident and must be changed it they have been activated.
Airbag system32
g may inflict critical or fatal injuries upon the
larly to children.
possible distance between yourself and the
t airbags can completely deploy when trig-
m protection.
at will trigger an airbag are: the type of acci-
d the speed of the vehicle.
red depends primarily on the vehicle deceler-
ollision and detected by the control unit. If the
during the collision and measured by the
specified reference values, the front, side
be triggered. Take into account that the visible
an accident, for whatever reason, are not an
gs were triggered.
orrectly or assuming an incorrect sitting posi- al injuries.
hildren, who are not properly belted can s if the airbag is triggered. You should always years of age on the rear seat. Never transport are not restrained or the restraint system is
, size or weight.
eat belt or if you lean forward or to the side or osition, the risk of injury is increased risk of injury will be further increased if you ag.
y from an inflating airbag, always wear the .
alhambra_ingles_0708 Seite 32 Mittwoch, 10. September 2008 10:55 10
Airbag system
Brief introduction
Why wear a seat belt and assume the correct sitting position?
For the inflating airbags to achieve the best protection, the
seat belt must always be worn properly and the correct sitting
position must be assumed.
For your own safety and the safety of the passengers, please ensure
the following before you drive:
Always wear the seat belt properly page 17.
Adjust the driver seat and the steering wheel correctly page 9.
Adjust the front passenger seat correctly page 10.
Adjust the head restraint seat correctly page 12.
Use the correct child restraint system to protect children in your
vehicle page 45.
The airbag deploys in fractions of a second and with a high velocity. If you
have assumed an incorrect seating position at that moment, you could
sustain critical injuries. Therefore, it is essential that all occupants maintain
a correct sitting position while travelling.
Braking heavily the moment before an accident may cause an occupant not
wearing a seat belt to be thrown forward into the area of the deploying airbag.
In this case, the inflating airba
occupant. This applies particu
Always maintain the greatest
front airbag. This way, the fron
gered, providing their maximu
The most important factors th
dent, the angle of collision an
Whether the airbags are trigge
ation rate resulting from the c
vehicle deceleration occurring
control unit remains below the
and/or curtain airbag will not
damage in a vehicle following
indication as to why the airba
WARNING
Wearing the seat belt inc tion can lead to critical or fat
All occupants, including c sustain critical or fatal injurie transport all children up to 12 children in the vehicle if they not appropriate for their age
If you are not wearing a s assume an incorrect sitting p substantially. This increased are struck by an inflating airb
To reduce the risk of injur seat belt properly page 17
Airbag system 33
Safety Fir Technical Data
ger airbag can strike the rear-facing child seat gainst the door, the roof or the backrest.
tances, it should be necessary to transport a at on the front passenger seat, it is absolutely he following safety measures:
de airbags for front passenger page 43.
e approved by the child seat manufacturer for r seat with front or side airbag.
instructions of the child seat manufacturer the warnings page 45.
ling the child seat, push the front passenger ar so that the greatest possible distance to the s ensured.
s prevent the front passenger seat from being .
nt passenger seat must be in an upright
g and belt tensioner system
itors the airbag and belt tension
ll airbags and belt tension devices in the
its and wiring connections.
alhambra_ingles_0708 Seite 33 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Always properly adjust the front seats.
Conditions for fitting a rear facing childseat in the front passenger seat
Rear-facing child seats must never be used on the front
passenger seat when the front passenger airbag is enabled.
An enabled front airbag on the front passenger side is potentially a major
danger to a child . The front passenger seat is life threatening to a child
if you transport the child in a rear-facing child seat. You should always trans-
port all children up to 12 years of age on the rear seat.
If a rear-facing child seat is secured to the front passenger seat, an inflating
airbag can strike it with such great force that critical or fatal injuries may
result.
Therefore we urgently recommend that you transport children on the rear
seats. That is the safest place in the vehicle for children. Alternatively, the
front and side airbags for the front passenger page 43 can be disabled
with the ignition key. When transporting children, use a child seat appro-
priate to the age and size of each child.
WARNING
If a child seat is mounted in the front passenger seat, the child is exposed to a greater risk in theevent of an accident.
Never secure a rear-facing child seat to the front passenger seat if the front passenger airbag is enabled. The child can suffer critical or fatal inju- ries when the front passenger airbag is triggered.
An inflating front passen and hurl it with great force a
If, under special circums child in a rear-facing child se essential that you observe t
Disabling front and si
The child seat must b use on a front passenge
Follow the installation and absolutely observe
Before properly instal seat all the way to the re front passenger airbag i
Ensure that no object pushed completely back
The backrest of the fro position.
Warning lamp for airba
This warning lamp mon
device system.
The warning lamp monitors a
vehicle, including control un
WARNING (continued) WARNING (continued)
Airbag system34
al of the airbags
are installed in various places in your vehicle.
m or remove and install parts of the system
work, parts of the airbag system may be
ay be that, in the event of an accident, the
oes not inflate at all.
nts must be observed when the vehicle or
scrapped. The specialist workshops and the
miliar with these requirements.
ut by a professional, or if the airbags are used or fatal injuries is increased. The airbags may in the wrong circumstances.
hing on the steering wheel hub or the soft unit on the passenger side of the dashboard, y them in any way.
ch any objects such as cup holders or tele- aces covering the airbag units.
el or dash panel, you may use only a dry cloth Never clean the dash panel and surface of the s containing solvents. Solvents cause the the airbag inflates, disintegrating plastic njuries.
djust, remove or install parts of the airbag
stem or removal and installation of the airbag (such as repairs to the steering wheel) should fied workshop. Qualified workshops have the
ation and qualified personnel.
alhambra_ingles_0708 Seite 34 Mittwoch, 10. September 2008 10:55 10
Monitoring of airbag and belt tension device system
The functionality of the airbag and belt tension device system is constantly
monitored electronically. The warning lamp will light up for four seconds
every time the ignition is switched on (selfdiagnosis).
If at least one airbag has been deactivated in a specialised workshop, the
warning light flashes for 12 seconds before starting the engine. This does
not apply when the front and side airbags have been deactivated using the
key switch page 43.
The system must be checked when the warning lamp :
does not come on when the ignition is switched on,
does not go off after four seconds, after switching on the ignition,
goes out and then comes on again after the ignition is switched on,
or if it comes on or flickers while the car is moving.
In the event of a malfunction, the warning lamp remains on continuously. In
addition, depending on the malfunction, an appropriate fault message
appears in the display1) of the instrument panel. In this event, you should
have a qualified workshop check the system immediately.
WARNING
If there is a malfunction, the airbag and belt tension device system cannot properly perform its protective function.
If a malfunction should occur, have the system checked immediately by a qualified workshop. Otherwise there is a risk that, in the event of an acci- dent, the airbag system and belt tension devices may not be triggered, or may not be triggered correctly.
Repair, care and dispos
The parts of the airbag system
If you work on the airbag syste
when performing other repair
damaged. The consequence m
airbag inflates incorrectly or d
The relevant safety requireme
components of the airbag are
Vehicle disposal centres are fa
WARNING
If repairs are not carried o incorrectly, the risk of severe fail to inflate, or could inflate
Do not cover or stick anyt plastic surface of the airbag and do not obstruct or modif
It is important not to atta phone mountings to the surf
To clean the steering whe or one moistened with water. airbag module with cleanser surface to become porous. If parts can cause substantial i
Never attempt to repair, a system.
Any work on the airbag sy components for other repairs be performed only by a quali necessary tools, repair inform
1) Depending on the version of the model.
Airbag system 35
Safety Fir Technical Data
alhambra_ingles_0708 Seite 35 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
We urgently recommend that you go to a qualified workshop for all work on the airbag system.
Never attempt to alter the front bumper or the body.
The airbags provide protection for one accident only, if they have been deployed they must be replaced.
WARNING (continued)
Airbag system36
is located in the steering wheel fig. 22 and
ger is located in the dash panel fig. 23.
ext AIRBAG.
elts, the front airbag system gives the front
on for the head and chest in the event of a
e 37.
ction of restraining the occupants, the seat
ront passenger in a position where the airbags
ion in a frontal collision.
stitute for seat belts, but is an integral part of
afety system. Please bear in mind that the
ffectively when the occupants are wearing their
s most important to wear the seat belts at all
required by law in most countries, but also for
rbag system are:
onitoring system (control unit),
ag with gas generator) for the driver and front
ash panel insert.
system is monitored electronically. The airbag
a few seconds every time the ignition is
if the warning lamp
e ignition is switched on page 33,
econds, after switching on the ignition,
on again after the ignition is switched on,
while the car is moving.
alhambra_ingles_0708 Seite 36 Mittwoch, 10. September 2008 10:55 10
Front airbags
Description of front airbags
The airbag system is not a substitute for the seat belts.
The front airbag for the driver
the airbag for the front passen
Airbags are identified by the t
In conjunction with the seat b
occupants additional protecti
severe frontal collision pag
In addition to their normal fun
belts also hold the driver and f
can provide maximum protect
The airbag system is not a sub
the vehicle's overall passive s
airbag system can only work e
seat belts. For this reason, it i
times, not only because this is
your safety
The main parts of the front ai
an electronic control and m
the two front airbags (airb
passenger,
a warning lamp in the d
The functionality of the airbag
warning lamp will light up for
switched on (self-diagnosis).
There is a fault in the system
does not come on when th
does not go off after four s
goes out and then comes
or if it comes on or flickers
Fig. 22 Driver airbag located in steering wheel
Fig. 23 Front passenger airbag located in dash panel
Airbag system 37
Safety Fir Technical Data
s
the risk of head or chest injury.
d so that the front airbags for the driver and front
severe frontal collision.
e front, curtain and side airbags may be trig-
, the airbags fill with a propellant gas and
d front passenger fig. 24. The fully deployed
movement of the front occupants and help to
e head and the upper part of the body.
ag allows the controlled escape of the propel-
uts pressure on the bag. Thus, the head and
tected by the airbag. Once the impact has been
s sufficiently for the front occupants to see
Fig. 24 Inflated front airbags
alhambra_ingles_0708 Seite 37 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
The front airbag system will not be triggered if:
if the ignition is switched off,
during a minor frontal collision,
during a minor side collision,
during a rear-end collision,
or if the vehicle rolls.
WARNING
The seat belts and airbags can only provide maximum protection if the occupants are seated correctly.
If a fault should occur in the airbag system, have the system checked immediately by a qualified workshop. Otherwise there is a danger that during a frontal collision, the system may fail to trigger, or not trigger correctly.
Function of front airbag
Inflated airbags reduce
The airbag system is designe
passenger are triggered in a
In certain types of accident th
gered together.
When the system is triggered
deploy in front of the driver an
airbags cushion the forward
reduce the risk of injury to th
The special design of the airb
lant gas when an occupant p
chest are surrounded and pro
absorbed, the airbag deflate
forward.
Airbag system38
sitioned correctly for the height of the occu-
eat belt or if you lean forward or to the side or osition, the risk of injury is increased risk of injury will be further increased if you ag.
the front seat without an appropriate restraint red in an accident, children can sustain
the airbag as it inflates page 45.
ront of the vehicle must never carry any ent space between them and the airbags, or
ngers to travel in this position.
ction for one accident only, if they have been ced.
attach any objects such as cup holders or surfaces covering the airbag units.
on the windscreen area above the passenger books or telephone holders. If the airbag is
fly uncontrollably around the vehicle interior
components of the airbag system in any
alhambra_ingles_0708 Seite 38 Mittwoch, 10. September 2008 10:55 10
In order to provide the desired extra protection in an accident, the airbags
have to deploy extremely rapidly (within fractions of a second). A fine dust
may develop when the airbag deploys. This is normal and is no indication
that there was a fire in the vehicle.
The function of the airbag covers if the airbags are triggered
The airbag covers fold out of the steering wheel or dash panel when the driver
and front passenger airbags deploy. The airbag covers remain connected to
the steering wheel or the dash panel.
Safety notes on front airbag system
If you use airbags correctly, they can considerably reduce the
risk of injury in many kinds of accident.
When the front airbags are triggered they fill the zones marked in red (radius
of action). Therefore additional accessories should never be placed in these
areas ,
The airbag covers fold out of the steering wheel or dash panel when the driver
and front passenger airbags deploy. The airbag covers remain connected to
the steering wheel or the dash panel.
WARNING
It is important that the driver keeps at a minimum of 25 cm from the steering wheel It is important that the passenger moves the seat back as far as possible, to keep a safe distance away from the instrument panel. Failure to respect the minimum distance means that the airbag will not protect you. Risk of fatal injury. In addition, the front seats and head
restraints must always be po pant.
If you are not wearing a s assume an incorrect sitting p substantially. This increased are struck by an inflating airb
Never let a child travel on system. If the airbag is trigge serious or fatal injuries from
Occupants sitting in the f objects or pets in the deploym allow children or other passe
The airbags provide prote deployed they must be repla
It is also important not to telephone mountings to the
Nothing should be placed side airbag, for example note activated, these objects may and could cause injury.
Do not attempt to modify way.
WARNING (continued)
Airbag system 39
Safety Fir Technical Data
bstitute for seat belts, but is an integral part of
safety system. Please bear in mind that the
ffectively when the occupants are wearing their
is most important to wear the seat belts at all
s required by law in most countries, but also for
ot be triggered
off,
ion,
lision,
n,
system are
monitoring system (control unit),
es of the backrests of the front seats,
dash panel insert.
g system is monitored electronically. The airbag
r a few seconds every time the ignition is
gs can only provide maximum protection if the tly.
the airbag system, have the system checked orkshop. Otherwise there is a danger that ystem may fail to trigger, or not trigger
alhambra_ingles_0708 Seite 39 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Side airbags
Description of side airbags
The airbag system is not a substitute for the seat belts.
The side airbags are located in the driver seat and front passenger seat back-
rests fig. 25.
In conjunction with the seat belts, the side airbag system gives the front seat
occupants additional protection for the upper body in the event of a severe
side collision page 40, Safety notes on the operation of the side airbag
system.
In a side collision the side airbags reduce the risk of injury to passengers on
the front seats to the areas of the body facing the impact. In addition to their
normal function of protecting the occupants in a collision, the seat belts also
hold the passengers on the front seats in a position where the side airbags
can provide maximum protection.
The airbag system is not a su
the vehicle's overall passive
airbag system can only work e
seat belts. For this reason, it
times, not only because this i
your safety
The side airbag system will n
if the ignition is switched
during a minor side collis
during a minor frontal col
during a rear-end collisio
or if the vehicle rolls.
The main parts of the airbag
an electronic control and
the side airbags in the sid
a warning lamp in the
The functionality of the airba
warning lamp will light up fo
switched on (self-diagnosis).
WARNING
The seat belts and airba occupants are seated correc
If a fault should occur in immediately by a qualified w during a side collision, the s correctly.
Fig. 25 Side airbag in left rear seat
Airbag system40
gs to provide their maximum protection, the ust always be maintained with seat belts
ould be used only for lightweight clothing. Do -edged objects in the pockets.
blows or kicks, must not be exerted upon the system may be damaged. In this case the side ed.
hould protective covers be fitted over the r seat unless the covers have been expressly cle. Because the airbag deploys from the side ventional seat covers would obstruct the side e airbag's effectiveness.
al seat upholstery or around the seams of the aired immediately by a qualified workshop.
ction for one accident only, if they have been ced.
incorrect sitting position, they expose them- f injury in the event of an accident. This is ild is travelling on the front passenger seat gered in an accident; this could have critical ous injury or death page 45.
ag system or removal and installation of the repairs (such as removal of the front seat) a qualified workshop. Otherwise, a fault may tion of the airbag system.
components of the airbag system in any
alhambra_ingles_0708 Seite 40 Mittwoch, 10. September 2008 10:55 10
Function of side airbags
Inflated airbags reduce the risk of head or chest injury.
In some side collisions the side airbag is triggered on the impact side of the
vehicle.
In certain types of accident the front, curtain and side airbags may be trig-
gered together.
When the system is triggered, the airbag is filled with propellant gas.
In order to provide the desired extra protection in an accident, the airbags
have to deploy extremely rapidly (within fractions of a second). A fine dust
may develop when the airbag deploys. This is normal and is no indication
that there was a fire in the vehicle.
The fully deployed airbags cushion the movement of the occupants of the
front seats and help to reduce the risk of injury to the upper body.
The special design of the airbag allows the controlled escape of the propel-
lant gas when an occupant puts pressure on the bag. Thus, the head and
chest are surrounded and protected by the airbag.
Safety notes on the operation of the side airbag system
Correct behaviour considerably reduces the risk of injury.
WARNING
If you do not wear a seat belt, if you lean forward, or are not seated correctly while the vehicle is in motion, you are at greater risk of injury should the side airbag system be triggered in an accident.
In order for the side airba prescribed sitting position m fastened while travelling.
The built-in coat hooks sh not leave any heavy or sharp
Great forces, such as hard backrest bolster because the airbags would not be trigger
Under no circumstances s driver seat or front passenge approved for use in your vehi of the backrest, the use of con airbag, seriously reducing th
Any damage to the origin side airbag units must be rep
The airbags provide prote deployed they must be repla
When children assume an selves to an increased risk o particularly the case if the ch and the airbag system is trig consequences including seri
Any work on the side airb airbag components for other should only be performed by be introduced into the opera
Do not attempt to modify way.
WARNING (continued)
Airbag system 41
Safety Fir Technical Data
airbag system are:
monitoring system (control unit),
gs with gas generator) for the driver, front
n the rear seats,
dash panel insert.
g system is monitored electronically.
ll not be triggered
off,
n,
ion,
airbag system, have the system checked imme- hop. Otherwise there is a danger that during a il to trigger, or not trigger correctly.
alhambra_ingles_0708 Seite 41 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Curtain airbags
Description of curtain airbags
The airbag system is not a substitute for the seat belts.
The curtain airbags are located on both sides in the interior above the doors
fig. 26 and are identified with the text AIRBAG.
In conjunction with the seat belts, the curtain airbag system gives the occu-
pants additional protection for the head and upper body in the event of a
severe side collision page 39.
The airbag system is not a substitute for seat belts, but is an integral part of
the vehicle's overall passive safety system. Please bear in mind that the
airbag system can only work effectively when the occupants are wearing their
seat belts correctly and have adjusted the head restraints properly. For this
reason, it is most important to wear the seat belts at all times, not only
because this is required by law in most countries, but also for your safety.
The main parts of the curtain
an electronic control and
the curtain airbags (airba
passenger and passengers o
a warning lamp in the
The functionality of the airba
The curtain airbag system wi
if the ignition is switched
during a frontal collision,
during a rear-end collisio
if the vehicle rolls,
during a minor side collis
WARNING
If a fault should occur in the diately by a qualified works collision, the system may fa
Fig. 26 Location of left curtain airbag
Airbag system42
ag allows the controlled escape of the propel-
ts pressure on the bag. Thus, the head and
tected by the airbag.
ration of the curtain airbag system
tly, they can considerably reduce the
ds of accident.
gs to provide their maximum protection, the ust always be maintained with seat belts
ad air bag must be disconnected in those ger compartment separation screen. See an make this adjustment.
ersons, animals or objects between the occu- the deployment space of the curtain airbags deploy without restriction and provide the
Therefore, sun blinds which have not been your vehicle may not be attached to the side
ould be used only for lightweight clothing. Do edged objects in the pockets. When using the clothes on coat hangers.
ction for one accident only, if they have been ced.
irbag system or removal and installation of her repairs (such as removal of the roof lining) a qualified workshop. Otherwise, a fault may tion of the airbag system.
alhambra_ingles_0708 Seite 42 Mittwoch, 10. September 2008 10:55 10
Function of curtain airbags
Fully inflated airbags reduce the risk of head or chest injury in
a side collision.
During some side collisions the curtain airbag is triggered on the impact side
of the vehicle fig. 27.
In certain types of accident the front, side and curtain airbags may be trig-
gered together.
When the system is triggered, the airbag is filled with propellant gas. In the
process, the curtain bag covers the side windows and door pillars.
In order to provide the desired extra protection in an accident, the airbags
have to deploy extremely rapidly (within fractions of a second). A fine dust
may develop when the airbag deploys. This is normal and is no indication
that there was a fire in the vehicle.
The fully deployed airbags cushion the movement of the front occupants and
help to reduce the risk of injury to the upper body.
The special design of the airb
lant gas when an occupant pu
chest are surrounded and pro
Safety notes on the ope
If you use airbags correc
risk of injury in many kin
WARNING
In order for the side airba prescribed sitting position m fastened while travelling.
For safety reasons, the he vehicles fitted with a passen Authorised Service Centre to
There must be no other p pants of the outer seats and so that the curtain airbag can greatest possible protection. expressly approved for use in windows.
The built-in coat hooks sh not leave any heavy or sharp- coat hooks, do not hang the
The airbags provide prote deployed they must be repla
Any work on the curtain a the airbag components for ot should only be performed by be introduced into the opera
Fig. 27 Deployed curtain airbags
Airbag system 43
Safety Fir Technical Data
d to disconnect the front and side airbag
l the other airbags in the vehicle remain
irbags for front passenger
ent on instrument panel.
turn the switch to OFF fig. 28.
tion is switched on, that the warning lamp
the instrument panel fig. 29 remains lit
ent on instrument panel:
irbags for front passenger
Fig. 29 Warning lamp for disabling airbag in dash panel
alhambra_ingles_0708 Seite 43 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Do not attempt to modify components of the airbag system in any way.
The side and head airbags are managed through sensors located in the interior of the front doors. To ensure the correct functioning of the side and head airbags neither the doors nor the door panels should be modified in any way (e.g. fitting loudspeakers). If the front door is damaged in any way, this may affect the correct working of the system. All work carried out on the front door must be made in a qualified workshop.
Deactivating airbags*
Disabling front passenger front and side airbags
The passenger airbags must be disconnected when a rear
facing child seat is fitted in the front passenger seat.
The key switch can be use
for the passenger seat. Al
functional.
Disabling front and side a
Switch off ignition.
Open centre compartm
Using the ignition key,
Check if, when the igni
PASS AIRBAG OFF on
.
Close centre compartm
Enabling front and side a
Switch off ignition.
WARNING (continued)
Fig. 28 Interior of centre compartment on instru- ment panel: Key switch for switching off the front passenger airbags
Airbag system44
inspected immediately by a qualified work-
on the front passenger seat! The front and y deploy during an accident in spite of the
rmine whether the front or side airbags will be ent. Inform your passengers of this.
alhambra_ingles_0708 Seite 44 Mittwoch, 10. September 2008 10:55 10
Open centre compartment on instrument panel.
Using the ignition key, turn the switch to ON page 43, fig. 28.
Check if, when the ignition is switched on, that the warning lamp
PASS AIRBAG OFF on the instrument panel page 43, fig. 29
does not light up .
Close centre compartment on instrument panel.
WARNING
The driver is responsible for the proper position of the key-operated switch.
You should only disable the front and side passenger airbags if, in exceptional cases, you have to use a rear-facing child seat on the front passenger seat page 45.
Never fit a child seat in the passenger seat, where the child faces back- wards to the direction of travel and the frontal airbag has not been deacti- vated. This is highly dangerous for the child. However, if it is necessary in exceptional circumstances to transport a child in a rear-facing child seat on the front passenger seat, you must always disable the front passenger airbag.
As soon as the child seat will no longer be used on the front passenger seat, enable the front and side passenger airbag again.
Only deactivate the front and side passenger airbag when the ignition is off, otherwise a fault may occur in the airbag system, this will create the risk of the front, curtain or side airbag not deploying properly or not at all in the event of an accident.
If, while the front and side passenger airbag are turned off, the indi- cator PASS. AIRBAG OFF does not remain lit, this could indicate a fault in the airbag system:
Have the airbag system shop.
Do not use a child seat side passenger airbag ma fault.
It is impossible to dete triggered in case of accid
WARNING (continued)
Child safety 45
Safety Fir Technical Data
ude the manufacturer's directions for child seat
always keep them in the vehicle.
hild seats
ts substantially reduces the risk of
onsible for any children you transport in
y properly using appropriate child seats.
belt webbing is properly positioned
ctions provided by the manufacturer of the
t allow children to distract you from traffic.
uring long trips. Take a break at least
ude the manufacturer's directions for child seat
always keep them in the vehicle.
he passenger seat, where the child faces back- vel and the frontal airbag has not been deacti- ous for the child. If it is necessary, in excep-
alhambra_ingles_0708 Seite 45 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Child safety
Brief introduction
Introduction
Statistics show that children are generally safer on the rear
seat than on the front passenger seat.
We recommend that children under 12 years of age be transported on the rear
seats. Children travelling on the rear seat must use a child restraint system or
the seat belts provided, depending on their age, height and weight. For
safety reasons, the child restraint system should be installed in the centre of
the rear seat or behind the front passenger's seat.
The physical principles involved and the forces acting in a collision apply to
children just as much as adults page 19. But unlike adults, children do not
have fully developed muscle and bone structures. This means that children
are subject to a greater risk of injury.
To reduce this risk, children must always use special child restraint systems
when travelling in the vehicle.
We recommend the use of child safety products from the SEAT Genuine Acces-
sories Program including systems for all ages made by Peke2).
These systems have been especially designed and approved, complying with
the ECE-R44. regulation.
Follow the manufacturer's instructions and observe any statutory require-
ments when installing and using child seats. Always read and observe
page 45.
We recommend that you incl
use in the vehicle wallet and
Safety notes on using c
Proper use of child sea
injury in an accident!
As the driver, you are resp
your vehicle.
Protect your children b
Always ensure that the
according to the instru
child seat.
When travelling, do no
Take breaks regularly d
every two hours.
We recommend that you incl
use in the vehicle wallet and
WARNING
Never fit a child seat in t wards to the direction of tra vated. This is highly danger2) Not for all countries
Child safety46
r its full protection if the belt web is not posi-
y a child seat.
alhambra_ingles_0708 Seite 46 Mittwoch, 10. September 2008 10:55 10
tional circumstances, to transport a child on the front passenger seat, always disable the front passenger airbag page 43.
All passengers, especially children, must assume the proper sitting position and be properly belted in while travelling.
Never hold children or babies on your lap, this can result in potentially fatal injuries to the child!
Never allow a child to be transported in a vehicle without being properly secured, or to stand up or kneel on a seat while travelling. In an accident, the child could be flung through the vehicle, causing possibly fatal injuries to themselves and other occupants.
If children assume an improper sitting position when the car is moving, they expose themselves to greater risk of injury during a sudden braking manoeuvre or in an accident. This is particularly the case if the child is trav- elling on the front passenger seat and the airbag system is triggered in an accident; this could have consequences including serious injury or death.
A suitable child seat can protect your child!
Make sure that no hard or sharp objects, for example toys, are on the child seats. Risk of injury.
Never leave a child unsupervised in a child seat or alone in the vehicle.
Depending on the time of year, the interior of a parked vehicle can reach extreme temperatures which may endanger the life of people and animals.
Children who are less than 1.5 metres tall must not wear a normal seat belt without a child restraint system, as this could cause injuries to the abdominal and neck areas during a sudden braking manoeuvre or in an accident.
Do not allow the belt webbing to become twisted or jammed, or to rub on any sharp edges.
Incorrectly worn seat belts can cause injuries even in a minor collision or sudden braking manoeuvres.
The seat belt cannot offe tioned correctly.
Only one child may occup
WARNING (continued) WARNING (continued)
Child safety 47
Safety Fir Technical Data
eats
d a correctly adjusted seat belt can
ld.
ut 9 months old and 10 kg in weight the most
aring in the illustration fig. 30.
out 18 months old and 13 kg in weight the most
aring in the illustration.
tructions and observe any statutory require-
ing child seats.
ude the manufacturer's directions for child seat
always keep them in the vehicle.
formation and warnings concerning the use of
Fig. 30 A group 0 rear- facing child seat fitted on the rear seat.
alhambra_ingles_0708 Seite 47 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Child seats
Categorisation of child seats into groups
Use only child seats that are officially approved and suitable
for the child.
Child seats are subject to the regulation ECE-R 44. ECE-R means: Economic
Commission for Europe Regulation
The child seats are grouped into 5 categories:
Group 0: Children up to 10 kg
Group 0+: Children up to 13 kg
Group 1: from 9 to 18 kg
Group 2: from 15 to 25 kg
Group 3: from 22 to 36 kg
Child seats that have been tested and approved under the ECE R 44 standard
bear the test mark on the seat (the letter E in a circle with the test number
below it).
Group 0 and 0+ child s
A suitable child seat an
help to protect your chi
Group 0: For babies from abo
suitable seats are those appe
Group 0+: For babies from ab
suitable seats are those appe
Follow the manufacturer's ins
ments when installing and us
We recommend that you incl
use in the vehicle wallet and
WARNING
Read and always observe in child seats page 45.
Child safety48
ts
a correctly adjusted seat belt can
d.
tructions and observe any statutory require-
ing child seats.
de the manufacturer's directions for child seat
lways keep them in the vehicle.
weighing between 15 and 25 kg are best
ts in conjunction with properly adjusted seat
ighing between 22 and 36 kg but less than 1.5
by seat cushions with head restraints in
n seat belts fig. 32.
Fig. 32 Forward-facing child seat installed on rear seat.
alhambra_ingles_0708 Seite 48 Mittwoch, 10. September 2008 10:55 10
Group 1 child seats
A suitable child seat and a correctly adjusted seat belt can
help to protect your child.
Child seats using the ISOFIX system or seats in which the child faces the
rear of the car are most appropriate for babies and small children weighing
between 9 and 18 kg.
Follow the manufacturer's instructions and observe any statutory require-
ments when installing and using child seats.
We recommend that you include the manufacturer's directions for child seat
use in the vehicle wallet and always keep them in the vehicle.
WARNING
Read and always observe information and warnings concerning the use of child seats
Group 2 and 3 child sea
A suitable child seat and
help to protect your chil
Follow the manufacturer's ins
ments when installing and us
We recommend that you inclu
use in the vehicle wallet and a
Group 2 child seats
Children under 7 years of age
protected by group 2 child sea
belts.
Group 3 child seats
Children over 7 years of age we
metres tall are best protected
conjunction with properly wor
Fig. 31 A category 1 forward-facing child seat fitted on the rear seat.
Child safety 49
Safety Fir Technical Data
ially approved child seat corre-
and height of the child is permitted.
groups 0, 0+, 1, 2, or 3 ( page 52) can
at.
e seat in the upright position and move the
possible. The seat must be in the highest posi-
ht-adjustable front passenger seat.
he passenger seat, where the child faces back- vel and the frontal airbag has not been deacti- ous for the child. If it is necessary in excep- hild on the front passenger seat, you must side passenger airbags page 43.
child seat appropriate to their weight and
ways be fitted in the direction of travel when ems in weight class 0 or 0+.
information and warnings concerning the use ty notes on using child seats on page 45.
follow the information and warnings provided rer.
alhambra_ingles_0708 Seite 49 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
WARNING
The shoulder part of the seat belt must lie approximately on the centre of the shoulder, never across the neck or the arm. The seat belt must lie close to the torso. The lap belt part must lie across the pelvis, not across the stomach, and always fit closely. Pull the belt tight if necessary to take up any slack page 22, Seat belts.
Read and always observe information and warnings concerning the use of child seats page 45.
Installation of child seats in vehicle seats
General notes
The correct fitting of child seats in the different seats is described below.
Child restraint systems that have been checked according to ECE-R 44 are
suitable for installation on the front passenger seat or on the rear seats.
Note The passenger seat and the rear seats comply with directive 77/541 EEC for
the installation of child restraint systems.
Front passenger seat
Only the use of an offic
sponding to the weight
Universal seats for children in
be fitted in the passenger se
To fit a child seat, position th
passenger seat as far back as
tion3) on vehicles with a heig
WARNING
Never fit a child seat in t wards to the direction of tra vated. This is highly danger tional cases to transport a c always disable the front and
Children must travel in a height.
The vehicle seat must al securing child restraint syst
Read and always observe of child seats in Safe
Please always read and by the child seat manufactu
3) Optional equipment
Child safety50
d row of seats (with three-point roof-
ally approved child seat corre-
and height of the child is permitted.
-point roof-anchored belt is suitable for weight
FIX system can be used on the centre seat if it
ers .
oint roof anchored belt is not suited to 3.
ays be fitted in the direction of travel when ms in weight class 0 or 0+.
child seat appropriate to their weight and
information and warnings concerning the use ty notes on using child seats on page 45.
llow the information and warnings provided er.
o further ISOFIX restraint systems can be fitted
e an ISOFIX system has been fitted to the centre
alhambra_ingles_0708 Seite 50 Mittwoch, 10. September 2008 10:55 10
Outer seats in the second row of seats and seats in the third row of seats
Only the use of an officially approved child seat corre-
sponding to the weight and height of the child is permitted.
In the outer seats of seats in the second and third row universal child seats
for groups 0, 0+, 1, 2, or 3 ( page 52) may be fitted.
Seat with ISOFIX retainers
These seats are suitable for ISOFIX child seats specially designed for this type
of vehicle in accordance with regulation ECE-R 44 .
Vehicle seat with integrated child seat
Universal child restraint systems for any group can be fitted to this seat if the
integrated child seat page 52, Integrated child seat is not used .
WARNING
Children must travel in a child seat appropriate to their weight and height.
The vehicle seat must always be fitted in the direction of travel when securing child restraint systems in weight class 0 or 0+.
Read and always observe information and warnings concerning the use of child seats in Safety notes on using child seats on page 45.
Please always read and follow the information and warnings provided by the child seat manufacturer.
Note Due to space limitation, only the two outer seats can be used if two ISOFIX
system seats are to be fitted in the second row of seats.
Centre seat in the secon anchored belt)
Only the use of an offici
sponding to the weight
The centre seat with the three
classes 0 to 2 .
Seat with ISOFIX retainers
Child seats fitted with the ISO
is equipped with ISOFIX retain
WARNING
The central seat with three-p universal child seats in group
The vehicle seat must alw securing child restraint syste
Children must travel in a height.
Read and always observe of child seats in Safe
Please always read and fo by the child seat manufactur
Note Due to space limitations, n
in the second row of seats onc
seat.
Child safety 51
Safety Fir Technical Data
he child seat, please be sure to follow the
ns.
to the ISOFIX retaining rings fig. 33
seat can be heard to engage securely.
e child seat to ensure that it is secure.
in seats equipped with the ISOFIX system,
in one of two positions fig. 34 or .
e secured to the body behind the seats in the
OFIX retaining rings are attached to the seat
tings are available from Authorised SEAT Service
esigned only for use with ISOFIX child seats.
elts, objects or non-ISOFIX child seats to the l accidents.
A1 A2
alhambra_ingles_0708 Seite 51 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
ISOFIX child seat mounting system
ISOFIX child seats can be mounted in the second and third
row seats quickly, safely and easily.
When removing or fitting t
manufacturer's instructio
Press the child seat on
(arrows) until the child
Pull on both sides of th
When a child seat is mounted
the backrest should be fitted
Two ISOFIX retaining rings ar
second and third rows. The IS
frames.
Child seats with ISOFIX moun
Centres.
WARNING
The retaining rings are d
Never secure retaining b fastening rings. Risk of fata
Fig. 33 Retaining rings for ISOFIX child seats in the frames of the outer seats in the second row of seats
Fig. 34 Backrest adjust- ment when using ISOFIX child seats
Child safety52
d seat
a correctly adjusted seat belt can
d.
t in the direction of the arrow fig. 35
in direction of the arrow until it
down the child seat cushion in direction
cushion up.
Fig. 35 Using the inte- grated child seat
A2
alhambra_ingles_0708 Seite 52 Mittwoch, 10. September 2008 10:55 10
Integrated child seat
Basic information on the integrated child seat
Proper use of child seats substantially reduces the risk of
injury in an accident!
It can be adjusted to suit the child's size and is suitable for children in the
following groups according to the ECE-R 44 norm: Group 1 (9 - 18 Kg), Group
2 (15 - 25 kg) and Group 3 (22 - 36 kg).
The integrated child seat for children in the Groups 1 and 2 must be used with the slumber roll delivered with the seat.
For safety reasons, we recommend that the child seat for children in Group 1
is installed facing against the direction of travel. To do this, simply remove
the seat and fit it again facing in the opposite direction. The child must be
fastened in using the harness belt.
The child seat may only be fitted in the direction of travel for children in Groups 2 and 3 who are fastened in using the three-point belt fitted in the vehicle.
WARNING
With the integrated child seat, the backrest may only be adjusted to the first or second backrest position for children in Groups 1 to 3.
The slumber roll must always be fitted for children in Groups 1 and 2.
The integrated child seat must not be modified in any way.
Do not allow the belt webbing to become twisted or jammed, or to rub on any sharp edges.
If the child seat or any parts of the seat are damaged, or if the child seat has to withstand the force of a collision in an accident, the seat, or part of the seat, must be replaced - preferably by a qualified dealership.
Group 1 integrated chil
A suitable child seat and
help to protect your chil
Setting up the child seat
Pull the loop to the fron
.
Push the seat cushion
engages in position.
Pull the loop to fold
of arrow .
Restoring the normal seat
First fold the child seat
A1
A3
A4
Child safety 53
Safety Fir Technical Data
ing for larger children in Group 1
t belt helps to protect your child!
fig. 36 of the support off the Velcro
de the two shoulder belts in the side slots
.
t under the belts and secure it .
e two belts in the side slots to the lower position
ust be pressed onto the seat in the area of the y that the belts can move freely in the slots.
Fig. 36 Integrated child seats. adjusting the belt routing
AA
6
AA
alhambra_ingles_0708 Seite 53 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Pull the loop in the direction of the arrow and push the seat
cushion down until it engages.
Fitting the slumber roll
Remove the head restraint.
Fit the head restraint onto the slumber roll.
Reinsert the head restraint and push down until it can be heard
to engage.
Removing the slumber roll
Remove the head restraint.
Pull the slumber roll off the head restraint.
Reinsert the head restraint and push down until it can be heard
to engage.
For safety reasons, we recommend that the child seat for children in Group 1
is installed facing against the direction of travel.
Adjusting the belt rout
A correctly adjusted sea
Pull the upper part fasteners to the front.
For larger children, gui
to the upper position
Then push the suppor
For smaller children, guide th
.
WARNING
The support fig. 36 m Velcro fastener in such a wa
A1
A
A7
AA
Child safety54
bottom is as far back on the seat as
ht and left over the child's shoulders.
ent fig. 37 with the tongue through
.
th the tongue at the front into the lock
e. (Pull to ensure they are securely
ective cushion is always underneath
e harness belt fig. 38 down in the
ntil the belt fits firmly against the body of
s fit firmly against the body of the child (even so that the child seat can provide the on possible.
AB
AC
AD
AE
A1
alhambra_ingles_0708 Seite 54 Mittwoch, 10. September 2008 10:55 10
Fastening the harness belt for children in Group 1
A correctly adjusted seat belt helps to protect your child!
Sit the child so that its
possible.
Place the belt to the rig
Push the belt lock elem
the other lock element
Insert both elements wi
until they click into plac
engaged!)
Make sure that the prot
the belt lock .
Pull the upper part of th
direction of the arrow u
the child.
WARNING
The harness belt must alway with thick or winter clothing) maximum amount of protecti
Fig. 37 Integrated child seats. closing harness belt
Fig. 38 Integrated child seats. adjusting harness belt
AD
Child safety 55
Safety Fir Technical Data
ld seat
d a correctly adjusted seat belt can
ld.
nt in the direction of the arrow fig. 40
in direction of the arrow until it
aint out of the backrest of the integrated
the head restraint together with the
belt
rt of the belt underneath the slumber roll.
Fig. 40 Integrated child seats. lift up the cushion
A2
alhambra_ingles_0708 Seite 55 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Releasing the harness belt for children in Group 1
A correctly adjusted seat belt helps to protect your child!
Press and hold the release button fig. 39 in the direction
of the arrow.
With the release button pressed, pull the lower part of the
harness belt down in the direction of the arrow.
Group 2 integrated chi
A suitable child seat an
help to protect your chi
Setting up the child seat
Pull the loop to the fro
.
Push the seat cushion
engages in position.
Remove the head restr
child seat and replace
slumber roll .
Fastening the three-point
Guide the shoulder pa
Fig. 39 Integrated child seats. adjusting harness belt
A2
A3 A1
AA
Child safety56
belt should be positioned roughly over the across the neck, and fit closely against the
across the pelvis, not across the stomach, and fitting of the belt.
d seat
a correctly adjusted seat belt can
d.
t in the direction of the arrow fig. 41
Fig. 41 Using the inte- grated child seat
alhambra_ingles_0708 Seite 56 Mittwoch, 10. September 2008 10:55 10
To fasten the three-point belt, take hold of the tongue and pull it
slowly across the chest and lap.
Push the tongue of the belt into the lock for that seat so that it
engages audibly (pull to check!)
Adjust the three-point belt to suit body size .
Restoring the normal seat
Pull the loop in the direction of the arrow and push the seat
cushion down until it engages.
Removing the slumber roll
Remove the head restraint.
Pull the slumber roll off the head restraint.
Reinsert the head restraint and push down until it can be heard
to engage.
Use the following measures to guarantee the proper routing of the shoulder
belt:
Seatbelt height setting
Adjustment of the seat forwards and backwards
Backrest angle adjustment
WARNING
For safety reasons, the seat for children in Group 2 may only be fitted in the direction of travel and in one of the outer positions (not on the centre seat).
The risk of injury is increased if the belt is not correctly routed.
The shoulder part of the centre of the shoulder, never upper part of the body.
The lap belt part must lie always fit closely. check the
Group 3 integrated chil
A suitable child seat and
help to protect your chil
Setting up the child seat
Pull the loop to the fron
.
A1
WARNING (continued)
A1
Child safety 57
Safety Fir Technical Data
across the pelvis, not across the stomach, and fitting of the belt.
fully and undo it at the end.
Velcro fastening in area .
the harness belts through the cover and
cover.
ashed in a washing machine at a maximum
Fig. 42 Section of inte- grated child seat
AA
AB
alhambra_ingles_0708 Seite 57 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Push the seat cushion in direction of the arrow until it
engages in position.
Fastening the three-point belt
To fasten the three-point belt, take hold of the tongue and pull it
slowly across the chest and lap.
Push the tongue of the belt into the lock for that seat so that it
engages audibly (pull to check!).
Adjust the three-point belt to suit body size .
Restoring the normal seat
Pull the loop in the direction of the arrow and push the seat
cushion down until it engages.
Use the following measures to guarantee the proper routing of the shoulder
belt:
Seatbelt height setting
Adjustment of the seat forwards and backwards
Backrest angle adjustment
WARNING
For safety reasons, the seat for children in Group 3 may only be fitted in the direction of travel and in one of the outer positions (not on the centre seat).
The risk of injury is increased if the belt is not correctly routed.
The shoulder part of the belt should be positioned roughly over the centre of the shoulder, never across the neck, and fit closely against the upper part of the body.
The lap belt part must lie always fit closely. check the
Cleaning the child seat
Open the zip fig. 42
Pull the cover from the
Guide the belt lock and
remove the child seat
The child seat cover can be w
temperature of 30C.
A2
A1
WARNING (continued)
Child safety58
alhambra_ingles_0708 Seite 58 Mittwoch, 10. September 2008 10:55 10
WARNING
When refitting the child seat cover, please ensure that the cover is fitted to the seat in the area of the Velcro fastening in such a way that the belts can move freely in the slots.
59
Safety Fir Technical Data
alhambra_ingles_0708 Seite 59 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
60
Fig. 4
alhambra_ingles_0708 Seite 60 Mittwoch, 10. September 2008 10:55 10
3 Instrument panel
Cockpit 61
Safety Fir Technical Data
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ompartment . . . . . . . . . . . . . . . . . . . .
witch . . . . . . . . . . . . . . . . . . . . . . . . . .
e control) . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ry switch
partment . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
owage compartment . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
trols* . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ent lever* . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ipment listed here are fitted only on certain
ptional extras.
ing wheel on the right, the layout of the control
nt. But the symbols assigned to the controls
136
134
110
174
125
134
36
133
166
139
101
173
160
241
211
alhambra_ingles_0708 Seite 61 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Operating instructions
Cockpit
Overview
Overview of the instrument panel
This overview will help you to familiarise yourself with the
controls and displays.
Door release lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electric wing mirror adjustment control . . . . . . . . . . . . . . . . . . .
Electric window control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Light switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Instrument lighting control / Headlamp range control . . . . . . .
Air outlets
main beam and turn signal light lever/ Cruise control* / . . . . .
Instrument panel / warning lights / . . . . . . . . . . . . . . . . . . . . . .
Horn / Driver's airbag* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ignition lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windscreen wiper lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switches for:
rear window heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
windscreen heater* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
left seat heating* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ESP* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Climatronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Radio
Cup holder* . . . . . . . . .
Central upper stowage c
Switches for:
hazard warning light s
PDC* (parking distanc
right seat heating* .
cover for supplementa
Glove box/Stowage com
Passenger airbag* . . .
Passenger side upper st
Gear lever . . . . . . . . . . .
Ash tray/ lighter . . . . .
Electric side window con
Handbrake . . . . . . . . . .
Pedals
Steering control adjustm
Fusebox cover . . . . . . .
Unlock bonnet lever . .
Note Some of the items of equ
models/model years or are o
In versions with the steer
elements is somewhat differe
A1 92
A2 119
A3 101
A4 109
A5 109
A6
A7 111, 176
A8 62, 70
A9 36
A10 162
A11 116
A12
115
115
125
182
A13 152
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
A27
A28
Cockpit62
uge4) page 65
/ trip recorder) page 65
. 44 Detailed view of dash panel instrument panel
alhambra_ingles_0708 Seite 62 Mittwoch, 10. September 2008 10:55 10
correspond to the symbols used in the versions with the steering wheel on
the left
Instruments
Instrument overview
The instruments display the vehicle operating status.
Rev counter page 63
Engine coolant temperature gauge page 63
Display in the combi-instrument4) and warning lamps page 704)
Fuel gauge page 64
Speedometer
Engine oil temperature ga
Clock page 65
Setting knob for the clock
Adjust kilometre button
Odometer (total mileage
Voltmeter4) page 65
Fig
4) Optional equipment
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
Cockpit 63
Safety Fir Technical Data
ature display
ngine coolant temperature.
en the ignition is switched on. The symbol
display for some seconds as a function
d heavy engine loads fig. 45 .
the needle should be in the middle section of
ay also rise when the engine is working hard,
peratures. This is no cause for concern, as long
not light up page 70.
ight up if the needle is in the warning zone. The
OOLANT SERVICE MANUAL may also appear in
Fig. 45 Instrument panel: engine coolant tempera- ture gauge
A2
alhambra_ingles_0708 Seite 63 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Rev counter
The rev. counter displays the engine speed in revolutions per
minute.
If, for example, the needle is directly over the 2, this corresponds to an engine
speed of 2000 rpm (revolutions per minute) page 62, fig. 44 .
The start of the red zone on the dial indicates the maximum engine speed
which may be used briefly when the engine is warm and after it has been run
in properly. However, it is advisable to change up a gear or move the selector
lever to D (or lift your foot off the accelerator) before the needle reaches the
red zone.
Caution The rev counter needle must never enter the red zone on the scale. Risk of
engine damage.
For the sake of the environment Changing up a gear early will help you to save fuel and minimise engine
noise.
Engine coolant temper
This gauge shows the e
The display only works wh
will also light up in the
check.
Needle in cold zone
Avoid high engine speeds an
Needle in normal zone
In normal driving conditions,
the scale. The temperature m
especially at high outside tem
as the warning lamp does
Needle in warning zone
The warning lamp will l
warning text5) STOP CHECK C
A1
AA
AB
AC
AC
A9
Cockpit64
f approx. 70 litres.
reserve zone fig. 46 -arrow-, the warning
y. The text6) PLEASE REFUEL may appear in the
he same time, an audible warning is given as a nt there are still about 8 litres of fuel in the
Fig. 46 Instrument panel: fuel gauge
alhambra_ingles_0708 Seite 64 Mittwoch, 10. September 2008 10:55 10
the combi-instrument display. Stop the car and switch off the engine. Allow
the engine to cool and check the coolant level .
Even if the coolant level is correct do not continue driving. You should obtain
technical assistance.
WARNING
Read and observe the warnings Working in the engine compartment before opening the bonnet to carry out work in the engine compartment.
Caution Accessories in front of the air inlet reduce the cooling effect of the coolant. At
high outside temperatures and high engine loads, there is a risk of the
engine overheating.
Fuel gauge
The fuel tank has a capacity o
When the needle reaches the
lamp lights up in the displa
combi-instrument display. At t
reminder to fill up. At this poi
tank.
5) Depending on model version 6) Depending on model version
Cockpit 65
Safety Fir Technical Data
ted beneath the rev counter.
page 62, fig. 44 briefly in an anti-
move the hour forward by one hour or
ng knob in an anti-clockwise direction to
more quickly.
riefly in a clockwise direction to set the
inute or
ng knob in a clockwise direction to set the
quickly.
e display page 62, fig. 44 registers the
vehicle.
e short journeys. The last digit indicates steps
er counter may be reset by the reset button
. 44 indicates the voltage of the vehicle elec-
the electrical system should normally be
A8
A10
A11
alhambra_ingles_0708 Seite 65 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Engine oil temperature display
Do not drive at full throttle if the temperature gauge indicates that the oil in
the engine is still cold. The engine revs should be reduced if the pointer goes
into the red area fig. 47 -arrow-. The needle must then return to the normal
zone.
If the pointer remains in the red zone, switch off the engine and check the
engine oil level. If the oil level is correct and the oil pressure warning lamp
does not start flashing when the engine is started, you can drive on to the
nearest qualified dealer, but do not run the engine at high speeds.
Setting the clock
The setting knob is loca
Setting the hour
Turn the setting knob clockwise direction to
turn and hold the setti
move the hour forward
Setting the minutes
Turn the setting knob b
clock forward by one m
Turn and hold the setti
minutes forward more
Mileage display
The top counter of the mileag
total mileage covered by the
The lower counter registers th
of 100 metres. The trip record
page 62, fig. 44 .
Voltmeter
The voltmeter page 62, fig
trical system. The voltage of
Fig. 47 Engine oil temperature gauge
A9
Cockpit66
you can call up the current service message by
t knob for 2 seconds.
d by a minus sign in front of the mileage or day
T dealer after the service has been carried out.
the SEAT dealership as confirmation that this
t by a SEAT Service centre, the service interval
anually as follows:
nob for the trip meter.
rn the reset button to the right. The display will
played after 15,000 km (10,000 miles) if you
elf. The service interval will not be determined
tween service intervals as the display will
alhambra_ingles_0708 Seite 66 Mittwoch, 10. September 2008 10:55 10
between 12 and 15 volts. If the voltage drops below 12 volts when the engine
is running, you should have the power supply (battery and alternator)
checked by a qualified dealership.
Note The voltage may drop below 8 volts while the engine is being started.
Service Interval Display
The service display is shown either on the mileage display page 62, fig. 44
or in the display 7) in the combi-instrument page 62, fig. 44 .
Service warning
A service pre-warning will appear in the odometer if a service is due soon. A
spanner symbol appears in the display along with the miles and the
number of kilometres until the next service. The service message will disap-
pear approximately 20 seconds after the ignition is switched on or if the
engine is running.
The distance quoted to the next scheduled service is reduced in increments
of 100 miles.
The following information text displayed in the instrument panel display:
SERVICE IN... KM OR SERVICE IN... DAYS. The service message will disappear
approximately 20 seconds after the ignition is switched on or the engine is
running. The normal display can be resumed by pressing the reset button on
the trip counter or by pressing the rocker switch of the windscreen wiper lever
.
If a service is due, a gong signal will sound and the flashing spanner
symbol will appear for approximately 20 seconds. The following information
text displayed in the instrument panel display: SERVICE NOW.
With the ignition switched on,
pressing the trip counter rese
An overdue service is indicate
information.
Resetting the service display
The display is reset by the SEA
You will receive a print-out from
work has been carried out.
If the service is not carried ou
display will have to be reset m
Switch off ignition.
Press and hold the reset k
Turn the ignition on and tu
return to the normal mode.
Note The next service will be dis
reset the service display yours
individually.
Do not reset the display be
otherwise be incorrect.
7) Optional equipment
A10 A3
AB
Cockpit 67
Safety Fir Technical Data
g on the exact nature of the functional problem,
e given.
ends on the type of combi-instrument you have
ombi-instrument does not have an integrated
ssages given on a fault, you will receive informa-
res or will be asked to carry out certain tasks.
fter a fault has been corrected, you should stop
ch off the engine and seek professional advice.
Action
off and check the brake fluid level page 221
off and seek professional help page 179
ge 216
alhambra_ingles_0708 Seite 67 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Display in the instrument panel
Fault messages
Faults are shown by warning lamps and / or as symbols with
warning and information reports on the display.
The system runs a check on certain components and functions when the igni-
tion is switched on and while the vehicle is moving. Functional problems are
shown by warning lamps and / or red or yellow symbols with fault texts on the
combi-instrument. Dependin
audible warnings may also b
Note The size of the display dep
fitted. In some models, the c
display.
In addition to warning me
tion in the display on procedu
Overview of selected fault messages
Fault messages are displayed on the combi-instrument display.
The following overview does not show all fault messages. Not all fault
messages are displayed with a symbol.
Warning symbols (priority 1)
If the symbol lights up again a
the vehicle immediately, swit
Fault message Symbol
STOP BRAKE FAULT SERVICE MANUAL Stop the car, turn the engine
HANDBRAKE ON Release the handbrake.
STOP BRAKE FAULT SERVICE MANUAL
and
Stop the car, turn the engine
STOP CHECK COOLANT SERVICE MANUAL Checking coolant level pa
Cockpit68
ff and check the brake fluid level page 214
workshop as soon as possible and have the
; and make sure your passengers are also
Action
with the right engine oil. page 214
sed Service Centre as soon as possible and
workshop as soon as possible and have the
fluid.
workshop immediately and have the brake
sed Service Centre as soon as possible and
sed Service Centre as soon as possible and
workshop immediately and have the airbag
Action
alhambra_ingles_0708 Seite 68 Mittwoch, 10. September 2008 10:55 10
Information symbols (priority 2)
STOP OIL PRESSURE ENGINE OFF SERVICE MANUAL Stop the car, turn the engine o
ALTERNATOR WORKSHOP! Take the vehicle to a qualified
alternator checked.
FASTEN SEATBELT Fasten your seat belt correctly
properly belted in page 17
Fault message Symbol
CHECK OIL LEVEL Check the oil level and top up
OIL SENSOR WORKSHOP Take the vehicle to an Authori
have the engine checked.
STOP BRAKE FAULT SERVICE MANUAL Take the vehicle to a qualified
ABS checked.
PLEASE REFUEL Refuel as soon as possible.
TOP UP WASHER FLUID Fill up with water and washer
CHECK BRAKE PADS Take the vehicle to a qualified
pads checked.
EXHAUST WORKSHOP Take the vehicle to an Authori
have the engine checked.
ENGINE FAULT CONSULT WORKSHOP or
Take the vehicle to an Authori
have the engine checked.
AIRBAG FAULT Take the vehicle to a qualified
system checked.
Fault message Symbol
Cockpit 69
Safety Fir Technical Data
alhambra_ingles_0708 Seite 69 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Fault message priorities
Priority 1 fault messages (red)
If one of these faults occurs, the warning lamp will flash or light up and will
be accompanied by three audible warnings . This is a danger warning.
Stop the car and switch off the engine. Check the fault and correct it. Obtain
professional assistance if necessary.
If several priority 1 faults are detected at the same time, the symbols will be
displayed one after the other for about 2 seconds at a time. The symbols will
keep flashing until the faults have been rectified.
No menus will be shown in the display for the duration of a priority 1 warning
report.
Priority 2 fault messages (yellow):
If one of these faults occurs, the warning lamp lights up, and is accompanied
by one audible warning. The function should be checked as soon as possible.
If several priority 2 warning reports are detected at the same time, the
symbols are displayed one after the other for about 2 seconds at a time.
Priority 2 warning reports will not be shown until all Priority 1 warning
reports have been dealt with!
WARNING
Failure to observe fault texts and warning lamps can result in serious personal injury or damage to your vehicle.
Cockpit70
Further information
page 33
page 72
page 73
page 73
page 73
. 48 Instrument panel with warning lamps. Some of items of equipment listed here are fitted only on tain models/model years or are optional extras.
alhambra_ingles_0708 Seite 70 Mittwoch, 10. September 2008 10:55 10
Warning lamps
Overview of the warning lamps
The warning lamps indicate a number of different functions and possible faults.
Item Symbol Meaning of warning and control lamps
Airbag
Trailer turn signals*
Cruise control
Operate the foot brake
Rear fog light
Fig the cer
A1
A2
A3
A4
A5
Cockpit 71
Safety Fir Technical Data
nt (die- page 73
page 73
page 73
page 73
page 74
page 74
page 74
page 74
page 75
page 76
page 76
page 17
page 76
page 76
Further information
alhambra_ingles_0708 Seite 71 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
If lit: preheating system active.
If flashing: there is a fault in the engine manageme
sel engines). Contact a specialist workshop.
Turn signals
Engine fault (petrol engine)
Main beam headlights
Fault in the emission control system
Traction control system TCS
Electronic Stabilising Program* (ESP)
Anti-lock brake system ABS
Diesel particulate filter
Brakes/Handbrake
Alternator
Seat belt warning lamp*
Fuel reserve
Fault in lights*
Item Symbol Meaning of warning and control lamps
A6
A7
A8
A9
A10
A11
A11
A12
A13
A14
A15
A16
A17
A18
Cockpit72
r information texts in the display, the appro-
will light up and a warning or information text
.
flashes when the turn signals are
caravan or trailer.
when the turn signals are operated, provided a
d connected to the vehicle.
h if one of the turn signals on the trailer fails.
page 77
page 77
page 77
page 77
page 77
page 78
Further information
alhambra_ingles_0708 Seite 72 Mittwoch, 10. September 2008 10:55 10
WARNING
Failure to observe warning lamps and warning messages can result in serious personal injury or damage to your vehicle.
The risk of an accident increases if your vehicle breaks down. Use a warning triangle to draw the attention of other road users to your stationary vehicle so that it does not represent a danger.
The engine compartment of any motor vehicle is a dangerous area! Before you open the bonnet to work on the engine or in the engine compart- ment, you must switch off the engine and allow it to cool to reduce the risk of scalding or other injuries. Read and observe the relevant warnings page 209.
Note The appropriate warning lamp for a fault will light up in vehicles without
warning or information texts in the display.
In vehicles with warning o
priate warning lamp for a fault
will also appear in the display
Trailer turn signals
This warning lamp also
operated while towing a
The warning lamp flashes
trailer is correctly attached an
The warning lamp will not flas
Tailgate open display*
Windscreen washer fluid*
Door open display*
Brake pad wear indicator*
Engine oil level/pressure*
Coolant temperature/level gauge
Item Symbol Meaning of warning and control lamps
A19
A20
A21
A22
A23
A24
Cockpit 73
Safety Fir Technical Data
es when the turn signals are in oper-
nal is operated, either the left or right indi-
ing lamps will flash at the same time when the
itched on.
rning lamp will start flashing twice as fast.
rn signals page 111.
itors the engine management system
onic Power Control) lights up when the ignition
he lamp is working properly. It should go out
running.
ronic engine management system while you are
ll light up. Take the vehicle to an Authorised
ssible and have the engine checked.
ts up when the main beams are on.
p when the main beams are on or when the
.
11.
alhambra_ingles_0708 Seite 73 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Cruise control system*
The warning lamp comes on when the cruise control system
is switched on.
The warning lamp lights up when the cruise control system is switched
on. Further information see page 176.
Operating the foot brake
The footbrake must be depressed when this warning lamp lights up. This is
necessary when the automatic gearbox* selector lever is moved out of the
positions P or N.
Rear fog light
This warning lamp lights up when the rear fog light is switched on . Further
information page 108.
Faults in diesel engines
This indicator monitors the engine management system for
diesel engines.
If a malfunction occurs in the engine management system while you are
driving, the control lamp will flash . Take the vehicle to an Authorised
Service Centre as soon as possible and have the engine checked.
At the same time, a text message or the necessary operations may appear on
the instrument panel.
Turn signals
The warning lamp flash
ation.
Depending on which turn sig
cator lamp flashes. Both warn
hazard warning lights are sw
If one turn signal fails, the wa
Further information on the tu
Engine management
This warning lamp mon
for petrol engines.
The warning lamp (Electr
is switched on to show that t
when the engine has started
If a fault develops in the elect
driving, this warning lamp wi
Service Centre as soon as po
Main beam headlights
This warning lamp ligh
The warning lamp lights u
headlight flasher is operated
Further information page 1
Cockpit74
programme (ESP)*
itors the electronic stabilisation
ABS, EDL and TCS.
following functions:
onds when the ignition is switched on while a
ut.
activated when driving.
y if there is a malfunction in the ESP.
y if the ESP is switched off.
lt should occur in the ABS because the ESP
he ABS.
hts up and stays on after the engine is started,
l system has temporarily switched off the ESP.
ctivated by switching the ignition off and then
goes out, this means the system is fully
(ABS)
monitors the ABS.
ight up for a few seconds when the ignition is
after the system has run through an automatic
not light up when the ignition is switched on.
t go out again after a few seconds.
alhambra_ingles_0708 Seite 74 Mittwoch, 10. September 2008 10:55 10
Fault in the exhaust system*
Exhaust gas indicator
If the indicator flashes it signals possible damage to the catalytic
converter caused by defective combustion. Reduce speed immediately and
go to the nearest specialised workshop to check the engine. At the same
time, a text message or the necessary operations may appear on the instru-
ment panel.
If the indicator lights up, a fault has developed during driving which has
affects the quality of the exhaust gas (e.g. lambda probe fault). Reduce speed
immediately and go to the nearest specialised workshop to check the engine.
At the same time, a text message or the necessary operations may appear on
the instrument panel.
Traction control system (TCS)*
The traction control system prevents the driven wheels from
spinning when the vehicle is accelerating
The warning lamp lights up when the ignition is switched on and should turn
out after about 2 seconds.
When the TCS is operating while driving, the warning lamp flashes. If the
system is deactivated or if there is any fault in the same, the warning lamp will
remain lit.
It will also come on if a fault should occur in the ABS because the TCS oper-
ates in conjunction with the ABS. For further information see page 181.
Electronic stabilisation
This warning lamp mon
programme.
This programme includes the
The warning lamp has the
It will light for about 2 sec
test of the function is carried o
It flashes when the ESP is
It will light up continuousl
It will light up continuousl
It will also come on if a fau
operates in conjunction with t
If the ESP warning lamp lig
this may mean that the contro
In this case the ESP can be rea
on again. If the warning lamp
functional.
Anti-lock brake system
A warning lamp system
The warning lamp should l
switched on. It goes out again
test sequence.
There is a fault in the ABS if:
The warning lamp does
The warning lamp does no
Cockpit 75
Safety Fir Technical Data
EDL)*
the ABS in vehicles equipped with an
Program (ESP)*
dicated by the ABS warning lamp . Please
workshop as soon as possible. For further infor-
82.
indicator lamp*
on the instrument panel it signals that the filter
f frequent short journeys. To clean the filter of
constant speed of 60 km/h for 15 minutes.
it. The most efficient way to clean the diesel
4th or 5th gear, at approximately 2,000 rpm
ture increase sufficient to burn the soot in the
rwards, go to a specialised workshop to
blockage signal) fuel consumption increases
er in some cases.
age or the necessary operations may appear on
peed of the vehicle to weather, road and traffic suggested by the warning lights should not way code.
alhambra_ingles_0708 Seite 75 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
The warning lamp lights up when the vehicle is moving.
The vehicle can still be braked in the normal way (except that the ABS control
function will not function). Please take the vehicle to a qualified workshop as
soon as possible. For further information on the ABS see the page 180.
If a fault occurs in the ABS, the ESP* warning lamp will also light up.
Brake system fault
If the ABS warning lamp lights up together with the brake warning lamp
, this indicates not only a fault in the ABS function, but also a possible fault
in the brake system .
WARNING
Before opening the bonnet, read and observe the warnings on page 209, Working in the engine compartment.
If the brake warning lamp should light up together with the ABS warning lamp , stop the vehicle immediately and check the brake fluid level in the reservoir page 221, Brake fluid. If the fluid level has dropped below the MIN mark you must not drive on. Risk of accident. Obtain technical assistance.
If the brake fluid level is correct, the fault in the brake system may have been caused by a failure of the ABS system. This could cause the rear wheels to lock quickly when you brake. This could cause the rear to break away. Risk of skidding. Drive carefully to the nearest qualified workshop and have the fault corrected.
Differential lock fault (
EDL operates along with
Electronic Stabilisation
A malfunction in the EDL is in
take the vehicle to a qualified
mation on the EDL page 1
Diesel particulate filter
When the indicator lights
is blocked by soot because o
these particulates, drive at a
Always respect the speed lim
particulate filter is to drive in
. This causes a tempera
filter.
If the lamp remains lit afte
examine the problem.
While the lamp is lit (filter
and the engine may lose pow
At the same time, a text mess
the instrument panel.
WARNING
Try to always adapt the s conditions. The indications lead you to disobey the high
Cockpit76
up while driving, the alternator is no longer
ld immediately drive to the nearest qualified
cal equipment that is not absolutely necessary
ttery.
tage is insufficient for normal vehicle
indicate that the fuel tank is down to
f fuel remain in the tank. Also, an audible as a reminder to fill up with fuel at the earliest
up when a bulb in the vehicle's exte-
.
when a bulb in the vehicle's exterior lighting
defective.
alhambra_ingles_0708 Seite 76 Mittwoch, 10. September 2008 10:55 10
Brake system* / handbrake
The warning lamp lights up if the handbrake is applied, if the
brake fluid level falls too low or if there is a fault in the brake
system.
This warning lamp lights up if
If the handbrake is on
If the brake fluid level is too low
If there is a fault in the brake system
This warning lamp can light up together with the anti-lock brake system
warning lamp.
WARNING
Before opening the bonnet, read and observe the warnings on
If the brake warning lamp does not go out, or if it lights up when driving, the brake fluid level in the reservoir is too low. Risk of accident. Stop the vehicle and do not drive on. Obtain technical assistance.
If the brake warning lamp lights up together with the ABS warning lamp , the control function of the ABS could be out of action. This could cause the rear wheels to lock quickly when you brake. This could cause the rear to break away. Risk of skidding. Drive carefully to the nearest qualified workshop and have the fault corrected.
Alternator
This warning lamp signals a fault in the alternator.
The warning lamp lights up when the ignition is switched on. It should go
out when the engine has started running.
If the warning lamp lights
charging the battery. You shou
workshop.
You should avoid using electri
because this will drain the ba
If the indicator flashes the vol
operation.
Fuel level / reserve
This symbol lights up to
the reserve level.
This lights when only 7 litres o
warning is given. This serves
opportunity
Bulb defect
The warning lamp lights
rior lighting is defective
The warning lamp lights up
(e.g. left-hand main beam) is
Cockpit 77
Safety Fir Technical Data
ates that the engine oil pressure is too
e does not operate correctly.
oil pressure too low)
or starts to flash in red while driving, a sound
ree times when the engine speed exceeds 1500
engine: check the oil level and replace if neces-
ven though the oil level is correct, do not
hould not be turning even at idle speed. Obtain
eed falls to below idling speed, the oil pressure
ncrease the engine speed by accelerating or
evel* too low)
in yellow, this indicates that the oil level is too
oil level, replacing where necessary.
he oil level warning will fall to zero. But if it is not
come back on after approximately 100 km.
level*)
und signal is emitted and the warning light
appears briefly on the on board computer
immediately be checked by a Technical Service
appears until the engine is checked, the level of
itored, preferably every time the vehicle is
alhambra_ingles_0708 Seite 77 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Tailgate open display*
When the ignition is switched on, the warning light indicates that the tailgate
is open.
The warning light only goes off when the tailgate is completely closed.
Washer fluid
This warning lamp lights up to indicate that the windscreen
washer level is too low.
This serves as a reminder to fill up the reservoir at the earliest opportunity
page 218.
Door open display*
This light comes on when a door is open or incorrectly closed.
Brake pad wear indicator*
As the brake pad wear indicator only monitors the front brake pads, it is advis-
able to have the rear brake pads inspected at the same time.
WARNING
Have the brake pads inspected immediately by a qualified dealership if the warning display lights up.
Engine oil pressure
The warning light indic
low or that the oil gaug
It lights up or flashes in red (
If the warning light lights up
signal will also be emitted th
rpm. Stop and switch off the
sary page 214.
If the warning light flashes e
continue driving The engine s
technical assistance.
If, while driving, the engine sp
warning light may come on. I
dropping to a lower gear.
A yellow light comes on (oil l
If the warning light comes on
low. Switch off engine, check
When the bonnet is opened t
topped with oil, the light will
Yellow flashing (defective oil
If the oil gauge is faulty, a so
flashes several times.
At the same time, a warning
display*. The engine should
Centre.
From the moment the defect
oil should be constantly mon
refuelled.
Cockpit78
you can see or hear steam or coolant escaping t. Risk of scalding. Wait until you can no team or coolant.
of any motor vehicle is a dangerous area! in the engine compartment, switch off the wn. Always note the corresponding warnings
alhambra_ingles_0708 Seite 78 Mittwoch, 10. September 2008 10:55 10
Coolant Level* / temperature
The warning lamp lights up if the coolant temperature is too
high or if the coolant level is too low.
There is a fault if:
The warning symbol does not go out again after a few seconds.
The warning lamp lights up or flashes while the vehicle is moving, while
three acoustic warning signals are emitted.
This means that either the coolant level is too low or the coolant temperature
is too high.
Coolant temperature too high
First look at the coolant temperature gauge. The coolant temperature is too
high if the needle is over the warning area on the dial. Stop the vehicle, switch off the engine and wait for it to cool down. Check the coolant level.
If the coolant level is correct, the overheating may be caused by a malfunction
of the radiator fan. Check the radiator fan fuse and have it replaced if neces-
sary page 241.
If the warning lamp lights up again after driving on for a short distance, stop the vehicle and switch off the engine. Contact an Authorised Service Centre
or a qualified workshop.
Coolant level too low
The following information text is displayed in the instrument panel display.
First look at the coolant temperature gauge. If the needle is in the normal
range, top up with coolant at the earliest opportunity .
WARNING
If your vehicle is immobilised for any technical reasons, move it to a safe distance from traffic. Turn off the engine, turn on the hazard lights and place the warning triangle.
Never open the bonnet if from the engine compartmen longer see or hear escaping s
The engine compartment Before carrying out any work engine and allow it to cool do page 209.
WARNING (continued)
Cockpit 79
Safety Fir Technical Data
lti-function indicator and on board computer is
functions and indications of the multi-function
chapter Intruments.
on, the on-board computer continually controls
s and vehicle components while the vehicle is
ent repairs or services are indicated by sound
red or yellow,depending on priority, on the
low symbols, text messages appear on the
version or the country, it is possible that the
ehicle does not display certain messages, or
those in this manual. For this reason, we advise
minous Indicators for complementary informa-
and a description of their function.
ox
dicated after the ignition is switched on. The
is emitted at the same time.
earbox
on with the lever in position P or N, the driver
lay:
S BRAKE TO SELECT GEAR
tc) the warning is erased.
alhambra_ingles_0708 Seite 79 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
On board computer with multifunction display
Description
The information from the mu
shown on these displays. The
indicator are described in the
When the ignition is switched
the working of certain system
in motion.
Faults in the operation or urg
signals and light warnings in
instrument panel.
In addition to the red and yel
driver's display.
Note Depending on the model
equipment installed in your v
they do not correspond with
you to consult the chapter Lu
tion on the different symbols
Check operation
Vehicles with a manual gearb
If faults exist, these will be in
corresponding sound signal
Vehicles with an automatic g
Once the ignition is switched
warning appears on the disp
WITH CAR STOPPED, DEPRES
After selecting a gear (R, D, e
Fig. 49 Vehicle instru- ment panel display with telematic or navigation system.
Fig. 50 Display in vehicle with on-board computer.
Cockpit80
while driving, stop and switch off the engine
el and replace if necessary.
ng, even though the oil level is correct, do not
hould not turn over even at idling speed, tech-
:
vel of brake fluid is too low. Stop the vehicle
vel of the brake fluid
systems
:
es while the ABS warning light is lit up, this
is faulty and that the behaviour of the normal
d.
nction with the ABS. If the EDS stops working,
n. When the ASR and the ESP fail this light also
l Service Centre as soon as possible.
:
lights up when the handbrake is applied with
t when the handbrake is released. If it does not
ke system.
alhambra_ingles_0708 Seite 80 Mittwoch, 10. September 2008 10:55 10
Where one or more faults exist, the warning disappears some 15 seconds
after the engine is started, and the corresponding fault symbols with their
respective text messages appear on the display.
For all vehicles
A sound signal is emitted in the event of a fault:
Priority 1 - three buzzes
Priority 2 - one buzz
If priority 1 and 2 faults occur at the same time, three buzzes are emitted.
In the event of a fault, the symbol with the corresponding text message is
displayed.
Note Priority 2 faults are displayed after repairing or eliminating priority 1 faults.
Priority 1 (red symbols)
Priority 1 symbols warn of a dangerous situation. Therefore
the engine should be stopped and switched off.
Where various priority 1 faults exist, the symbols appear one by one for
approx 2 seconds The symbols will keep flashing until the faults have been
rectified.
The following priority 1 warnings or faults may appear:
Engine oil pressure
The corresponding warning is:
STOP PRES. OIL
STOP ENGINE!
If this symbol begins to flash
immediately. Check the oil lev
If the symbol continues flashi
continue driving. The engine s
nical assistance is necessary.
Brake system
The corresponding warning is
STOP BRAKE FLUID
SERVICE MANUAL.
This symbol lights up if the le
immediately and check the le
2. ABS, EDL*, TCS* and ESP*
The corresponding warning is
STOP BRAKES FAULTY
SERVICE MANUAL.
If the brake warning light flash
indicates that the ABS system
brake system may be damage
The EDS system works in conju
the ABS warning lamp comes o
comes on. Consult a Technica
3. Handbrake
The corresponding warning is
HANDBRAKE ON
The handbrake warning lamp
the ignition on It should go ou
this indicates a fault in the bra
Cockpit 81
Safety Fir Technical Data
even though the belt is neither loose nor
to continue driving to the nearest Technical
charge, it is advisable to switch off all non-vital
s:
me countries) lights up for approximately 6
switched on to remind occupants to fasten seat-
t fastened, a sound signal is emitted when the
will stop when the seat belts are fastened or
s.
below the MIN mark, you should wait for personnel before continuing to drive.
t, the fault may lie in the ABS. If the ABS control s may block rapidly on braking. This, in certain the vehicle to skid.
f you see steam or coolant escaping from the f burns. Wait until you can no longer see or
lant.
it could suddenly start to operate, even if the
iling coolant, the following should be
the coolant expansion tank!. When the engine s pressurised! Therefore wait until the engine p.
alhambra_ingles_0708 Seite 81 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
An audible signal is also given if the car is driven faster than 6 km/h (approx.
4 mph) with the handbrake applied.
Coolant temperature/level gauge
The corresponding warning is:
STOP CHECK LEVEL COOLANT
SERVICE MANUAL.
If the symbol flashes while driving, this means that either the coolant temper-
ature is too high or the coolant level is too low. Stop immediately, switch off
the engine and check the level. Top up coolant if necessary.
If the coolant level is correct, the overheating may be caused by a malfunction
of the radiator fan. In this case, check the radiator fan fuse, and replace if
necessary.
If the warning light does not go out, although the coolant level is correct and
the fan fuse is correct, do not continue driving. Obtain technical assistance.
If the fault is only in the radiator fan, it is possible to continue driving as far
as the nearest Technical Service Centre, as long as the coolant level is correct
and the display light is off.
Alternator
The corresponding warning is:
ALTERNATOR WORKSHOP!
The warning lamp lights up when the ignition is switched on. It should go out
when the engine is started.
The alternator is operated by a long-lasting drive belt.
If the warning light lights up while driving, stop, switch off the engine and
check the drive belt. If the belt is loose or broken, do not continue driving, as
the coolant pump will not be driven. The belt should be checked or replaced.
If the warning light comes on
broken, it is usually possible
Service Centre.
As the vehicle battery will dis
electrical consumers.
Seat belt warning lamp
The corresponding warning i
FASTEN SEAT BELT
This warning light (only in so
seconds when the ignition is
belts. If the seat belts are no
ignition is switched on which
after approximately 6 second
WARNING
If the brake fluid level is assistance from specialised
If the fluid level is correc system fails, the rear wheel circumstances, could cause
Never open the bonnet i engine compartment. Risk o hear escaping steam or coo
Do not touch the fan, as ignition is switched off.
To prevent burns from bo observed:
Take care when opening is warm or hot, the system i cools before opening the ca
Cockpit82
:
engine arises while driving, the corresponding
ne) or flash (diesel engine). In this case the
mediately by a Technical Service Centre.
:
own in the following manner:
s on separately, it is possible to brake the
e system (without ABS). Consult a Technical
sible.
:
on, the vehicle key data is automatically
ill flash to confirm that the data is being
, the warning light will flash constantly. It will
hicle.
*
:
tes that the tailgate is open.
alhambra_ingles_0708 Seite 82 Mittwoch, 10. September 2008 10:55 10
To protect your face, hands and arms from hot steam or fluid, cover the fan cap with a large cloth in order to open it.
Take care to avoid coolant spilling on the exhaust pipe or any other hot component as antifreeze is inflammable.
Priority 2 (yellow symbols)
If a yellow symbol appears, a sound signal is emitted. The symbols indicate
a dangerous situation. The function shown should be controlled as fast as
possible. If various faults occur at the same time, the symbols will be
displayed one by one for approx. 2 seconds.
Oil level too low
The corresponding warning is:
CHECK LEVEL OIL
If the symbol lights up: stop, switch off the engine and check the oil level,
topping up where necessary.
Oil level too low
The corresponding warning is:
OIL SENSOR WORKSHOP!
If the symbol flashes this probably means that the oil level sensor is defec-
tive. The vehicle should immediately be taken to a Technical Service Centre.
It is possible to continue driving, but the oil level should be continually moni-
tored, e.g. every time the vehicle is refuelled.
Engine fault
- Petrol engine
- Diesel engine
The corresponding warning is
ENGINE FAULT WORKSHOP!
If a fault in the running of the
light will come on (petrol engi
engine should be checked im
Anti-lock brake system (ABS)
The corresponding warning is
ABS FAULT
A fault in the ABS system is sh
If the ABS warning light come
vehicle using the normal brak
Service Centre as soon as pos
Electronic immobiliser
The corresponding warning is
IMMOBILIS.ACTIVE
When the ignition is switched
consulted. The warning light w
checked
If an unauthorised key is used
not be possible to start the ve
Tailgate/bonnet open display
The corresponding warning is
TAILGATE OPEN
This warning light only indica
WARNING (continued)
Cockpit 83
Safety Fir Technical Data
n system it is possible to go from one display to
the windscreen wiper lever ( by holding it
):
or the multifunction display are activated, the
played on the on-board computer screen.
SEAT navigation system are included in a sepa-
Fig. 52 On-board computer display:
alhambra_ingles_0708 Seite 83 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
The warning light only goes off when the tailgate is completely closed ( to the
second position)
Windscreen washer*
The corresponding warning is:
TOP UP WASHER FLUID
This symbol lights up to indicate that the windscreen washer level is too low.
Top up windscreen and headlight washer fluid*
Fuel level low
The corresponding warning is:
PLEASE REFUEL
Navigation system* If the vehicle has a navigatio
the other using the button on
pressed in for over 2 seconds
Navigation display
Multifunction display
When the navigation display
possible faults are mainly dis
Instructions for the use of the
rate handbook.
Fig. 51 Button on the windscreen washer lever:
Cockpit84
steering wheel.
control8) for the radio unit.
ise the volume of the radio.
wer the volume of the radio.
functions:
search, forwards (radio), listening to TIM
h oldest (radio / navigation), fast forward
track (CD mode).
. 53 Multi-function steering wheel with controls
alhambra_ingles_0708 Seite 84 Mittwoch, 10. September 2008 10:55 10
Steering wheel controls
Multifunction steering wheel*
These controls enable you to perform various functions without taking your hands off the
The controls on the multi-function steering wheel fig. 53 only work when
the ignition is switched on.
Rocker switch for the cruise control system (CCS) :
By briefly pressing the button the programmed speed is recov-
ered.
If the button is held down the speed increases. The speed of the
vehicle at the moment the button is released will be stored.
By briefly pressing the button the actual speed is stored.
If the button is held down the speed decreases. The speed of the
vehicle at the moment the button is released will be stored.
Button for switching off CCS temporarily. The target speed remains
stored.
Rocker switch for volume
Press button to ra
Press button to lo
Rocker switch for various
Button for: station
messages, starting wit
(cassette mode), next
Fig
A1
-
-
A2 8) Only for factory-fitted radio.
A3
A4
Cockpit 85
Safety Fir Technical Data
possible through the telephone, since the
ected.
, either take the mobile telephone with you or
eptance off as incoming calls will be passed on
off.
ion*
consists of:
of the drinks holder),
er switch in the radio system to relay telephone
the dash panel,
al.
together with the vehicle system, a mobile tele-
dash panel is also required. Next, the mobile
ve to be connected to the dash panel telephone
s use, please contact your SEAT Dealer.
alhambra_ingles_0708 Seite 85 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Button for: station search, backwards (radio), listening to TIM
messages, starting with latest (radio / navigation), fast rewind
(cassette mode), last track (CD mode).
Pushbutton for switching lighting on and off on the controls on the multi-
function steering wheel (on the side of the steering wheel).
Note The cruise control system is switched on and off using the button on the turn-
signal / main beam lever.
Telephone*
Handsfree system for mobile telephones*
Using the hands-free unit you can telephone without having to hold the
mobile telephone in your hand.
The voice of the person you are talking to will be relayed via the loudspeakers
of the radio system. You do not have to do anything in particular to respond -
simply behave as if you were talking to the front seat passenger.
The microphone is located on the left-hand side of the drink holder.
The required volume for the conversation can be set via the radio controls.
Note Please note that you will be able to hold a phone conversation through the
handsfree system only when the key is in the ignition. If the key is removed,
the conversation will only be
handsfree system is disconn
When leaving the vehicle
switch the automatic call acc
even if the radio is switched
Telephone preinstallat
The telephone preinstallation
a microphone (on the left
an interface box,
the automatic loudspeak
conversations,
a support incorporated in
and a telephone roof aeri
In order to use the telephone
phone holder adapted to the
telephone holder will then ha
console.
For any queries concerning it
A5
Cockpit86
alhambra_ingles_0708 Seite 86 Mittwoch, 10. September 2008 10:55 10
CE0434.
Declaration of conformity
NOKIA CORPORATION declares under its sole responsibility that the product
HT-1 conforms to the provisions in 1995/5/EC of the European Union Council.
A copy of the Declaration of Conformity can be requested from the Customer
Service Department for this brand.
Unlocking and locking 87
Safety Fir Technical Data
n a safe place.
the vehicle.
give the plastic key tab to the new owner.
y, take your key tab to an Authorised Service
can result in critical injuries.
isabled persons in the vehicle; in case of emer- to leave the vehicle or look after themselves.
y could mean that the engine is started or that (e.g. electric windows). Risk of accident. The e remote control key. This could result in
vehicle in an emergency.
hicle keys in the vehicle. Unauthorised use of injury, damage or theft. Always take the key vehicle.
m the ignition if the vehicle is in motion. Risk k could engage suddenly, and you would not be
nts in the key and remote control. Protect the
ssive vibration.
alhambra_ingles_0708 Seite 87 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Unlocking and locking
Keys
Key set
The set of keys includes a remote control, a key without a
remote control and a key tab with the number of the key.
The key set belonging to your vehicle consists of the following items:
one remote control key fig. 54 with folding key bit*,
one key with a remote control ,
one key tab with the key number.
Plastic key tab
Spare keys cannot be issued without the key number on the key tab fig. 54
. Therefore:
Always keep the key tab i
Never leave the key tab in
If you sell the vehicle, please
Duplicate keys
If you need a replacement ke
Centre.
WARNING
Incorrect use of the keys
Never leave children or d gency they may not be able
Unsupervised use of a ke electrical equipment is used doors can be locked using th people being trapped in the
Never leave any of the ve your vehicle could result in with you when you leave the
Never remove the key fro of accident. The steering loc able to steer the vehicle.
Caution There are electronic compone
keys from moisture and exce
Fig. 54 Set of keys
AA
AB
AC
AB
Unlocking and locking88
fig. 56. This unfolds with a spring
n and push key down until it clicks into
al locking system
m enables you to lock and unlock all
te from one point.
d using any of the following options:
in the driver door page 87,
Fig. 56 Folding key
AA
AA
alhambra_ingles_0708 Seite 88 Mittwoch, 10. September 2008 10:55 10
Remote control keys*
Two keys are supplied in vehicles with remote control, a folding key and a
fixed key fig. 55.
Note In certain versions of the model, the remote control key may be folding. The
key works, in terms of remote control, in the same way as other remote control
keys page 94.
Folding key*
To unfold key bit, press button
action.
To fold the key bit, press butto
place.
Central locking
Description of the centr
The central locking syste
the doors and the tailga
Central locking can be operate
mechanically with the key
Fig. 55 Remote control keys
Unlocking and locking 89
Safety Fir Technical Data
e doors with the key
ck on the driver door.
n position. The doors and the tailgate are
ck on the driver door.
to the locking position . The doors
cked.
ish to unlock your vehicle manually using the
, the interior monitoring system10) and the anti-
ted immediately. The deactivation is confirmed
riefly twice.
ourtesy position will be switched on for approx-
vehicle is unlocked.
locking position, all windows (apart from the
will be opened on vehicles equipped with elec-
ish to lock your vehicle manually using the key:
alhambra_ingles_0708 Seite 89 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
the key with remote control9) page 94,
with the central locking button page 91.
Individual opening of doors9)
An Authorised SEAT Service Centre can programme the individual opening of
doors.
When the key is turned once in the driver's door lock, in the direction of
opening, or when button page 94, fig. 61 on the remote control key is
pressed, only the driver's door will unlock.
When the key is turned a second time or the button is pressed a second
time, all the doors and the tailgate are unlocked.
WARNING
Do not leave anyone in the car if it has been locked from the outside. It is not possible to open the doors from the inside. Locked doors could delay assistance in an emergency. People could become trapped inside in an emergency.
Never close the doors without observing and ensuring it is clear, to do otherwise could cause serious injury to you and others. Make sure that no one is in the path of the door.
Note The entire vehicle is unlocked if the airbags are triggered during an accident.
The vehicle cannot be locked from the inside unless the ignition is first
switched off and back on. Following an accident, the vehicle cannot be locked
from the outside. Contact an Authorised Service Centre.
Opening and closing th
Opening the doors
Insert the key in the lo
Turn the key to the ope
unlocked.
Closing the doors
Insert the key in the lo
First turn the key once
and the tailgate are lo
Notes on unlocking
The following applies if you w
key:
The deadlock mechanism
theft alarm10) will be deactiva
by the turn signals flashing b
The interior lights in the c
imately 20 seconds when the
If the key is held in the un
electric vent wing at the rear)
tric windows.
Notes on locking
The following applies if you w
9) Optional equipment
A1
10) Optional equipment
Unlocking and locking90
d using the remote control key. This could pped in the vehicle in an emergency.
ith you when you leave the vehicle.
m the ignition if the vehicle is in motion. Risk could engage suddenly, and you would not be
mponents. Protect the keys from moisture and
n programme the central locking system so that
ked when the key is turned once to open.
alhambra_ingles_0708 Seite 90 Mittwoch, 10. September 2008 10:55 10
The deadlock mechanism, the interior monitoring system10) and the anti-
theft alarm10) will be activated immediately if the key is turned once in the
lock. The activation is confirmed by the turn signals flashing briefly.
The deadlock mechanism, the interior monitoring system and the anti-
theft alarm will not be activated if the key is turned in the lock twice within
one second. All the doors and the tailgate will, however, be locked. The doors
can be unlocked from the inside if the deadlock mechanism has not been
activated. To do this, operate the door opening lever on the door in question.
The alarm will go off.
When locking the vehicle, the interior lights in the courtesy switch posi-
tion will be switched off
A warning lamp in the driver door flashes to indicate the deadlock is
working. The warning lamp will switch off after 14 days. This is to prevent the
vehicle battery from discharging completely when the vehicle is not used for
a longer period. The system is still active.
Windows, or the sliding roof, which are still open can be closed automat-
ically on vehicles equipped with electric windows and electric vent windows
or with an electric sliding roof. To do this, the key must be kept held in the
locking position until all windows and the sliding roof are fully closed.
WARNING
If the vehicle is locked, children and disabled people may be trapped inside.
Never leave children or disabled persons in the vehicle; in case of emer- gency they may not be able to leave the vehicle or look after themselves.
Always take you car keys with you when you leave the vehicle. Misuse of the keys, for example, by children, may result in serious damage and accident.
The engine may accidentally be started and be out of control.
If the ignition is switched on, the electric equipment could be acti- vated with risk of injury, for example, in the electric windows.
The doors can be locke result in people being tra
Always take the key w
Never remove the key fro of accident. The steering lock able to steer the vehicle.
Caution Each key contains electronic co
excessive vibration.
Note Any SEAT Service centre ca
only the driver's door is unloc
WARNING (continued)
Unlocking and locking 91
Safety Fir Technical Data
n you use the central locking button to lock your
and the anti-theft alarm11) are not activated
ed.
pen the doors or the tailgate from the outside
r instance when stopped at traffic lights).
ed if it is open. This prevents you from locking
ors separately from inside the car. You will have
once. The door will be opened by pulling the
ren and disabled people may be trapped
isabled people alone in the car. The doors will locking button is activated. Vehicle occupants vehicle. In the event of an accident they would Locked doors could make it more difficult to the event of an accident.
m makes it more difficult to break into
door release lever and the central
ctive.
e driver's door lock to lock or
alhambra_ingles_0708 Seite 91 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Central locking buttons
The vehicle can be locked and unlocked from the inside using
the central locking button in the driver door.
Locking the vehicle
Press button fig. 57 .
Unlocking the vehicle
Press button .
The central locking button is still operative when the ignition is switched off.
Neither the deadlock mechanism nor the antitheft alarm can be activated or
deactivated via the central locking button11). The central locking button will
not function when the deadlock is activated.
Please note the following whe
vehicle:
The deadlock mechanism
when the button is press
It will not be possible to o
(this may offer extra safety, fo
The driver door is not lock
yourself out of the vehicle.
You can unlock all the do
to pull the door release lever
door release lever again.
WARNING
If the vehicle is locked, child inside.
Never leave children or d be locked when the central could become trapped in the not be able to reach safety. assist vehicle occupants in
Deadlock
The deadlock mechanis
the vehicle because the
locking button are not a
Activating deadlock
Turn the key once in th 11) Optional equipment
Fig. 57 Detail of driver door: central locking system button
AA
AB
Unlocking and locking92
also be locked and unlocked centrally by oper-
lever. Press or pull lever fig. 58. In this case
The door release lever for the front passenger
no influence on the other safety areas. When
l only lock and unlock their own areas.
ot be locked using the door release lever. This
rself out of the vehicle.
be activated if the vehicle is locked from the
adio remote control. The doors can then no
ide or the outside. The deadlock mechanism
is switched on. The doors can be opened using
ush the door release lever in and then pull it
Fig. 58 Driver's door release lever in normal position
alhambra_ingles_0708 Seite 92 Mittwoch, 10. September 2008 10:55 10
press once the locking button on the remote control12). A red
warning lamp in the driver door flashes to indicate the deadlock
is working.
Deactivating deadlock when the vehicle is locked
Turn the key twice in the driver's door lock to lock or
press twice the locking button on the remote control12). The
vehicle is locked without activating the deadlock.
The doors can be unlocked from the inside if the deadlock mechanism has not
been activated. You will have to pull the door release lever once. The door will
be opened by pulling the door release lever again. When the deadlock is
deactivated, the anti-theft alarm12) page 96 and the interior monitoring
system are also deactivated12).
WARNING
Nobody should remain in the vehicle if the deadlock mechanism has been activated. It is not possible to open the doors from the inside. Locked doors could delay assistance in an emergency. People could become trapped inside in an emergency.
Door release lever
The doors and the tailgate can
ating the driver's door release
the deadlock is not activated.
door and the rear doors have
used, these release levers wil
The opened driver's door cann
prevents you from locking you
Note The deadlock mechanism will
inside by accident using the r
longer be opened from the ins
will be released if the ignition
the door release levers. First p
out.
12) Optional equipment
Unlocking and locking 93
Safety Fir Technical Data
tivated to prevent children opening the doors by
f lock is activated, the door can be opened from
of lock can be activated and deactivated using
alhambra_ingles_0708 Seite 93 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Childproof locks
The childproof lock prevents the rear doors being opened
from the inside.
Activating the childproof lock
Unlock the car and open the door you wish to child-proof.
Move the lever using the vehicle key in the direction of the arrow
fig. 59.
Deactivating the childproof lock
Unlock the car and open the door on which you wish to deacti-
vate the child-proof lock.
Move the lever using the vehicle key in the opposite direction to
the arrow.
The childproof lock can be ac
accident. When the childproo
the outside only. The childpro
a key when the door is open.
Fig. 59 Release for the child lock in the rear left- hand door
Unlocking and locking94
61 on remote control to unlock all the
remote control to lock all the doors and
s pressed, the battery indicator lamp on the key
the control, the key shaft is released.
r and the batteries are integrated in the remote
nterior of the vehicle. The remote control, when
range of several metres around the car. Obsta-
ol and the vehicle, bad weather conditions and
iderably reduce the range of the remote control
Fig. 61 Assignment of buttons on the remote control key
A1
alhambra_ingles_0708 Seite 94 Mittwoch, 10. September 2008 10:55 10
Key with remote control
Unlocking and locking vehicle
The remote control key enables you to lock and unlock the
vehicle from a distance.
Unlocking the vehicle
Press button fig.
doors and tailgate.
Locking the vehicle
Press button on
tailgate.
When either of these buttons i
fig. 61 lights up.
Using button fig. 61 on
The remote control transmitte
control. The receiver is in the i
fitted with new batteries, has a
cles between the remote contr
discharged batteries can cons
page 95.
Fig. 60 Range of the remote control
A2
A4
A3
Unlocking and locking 95
Safety Fir Technical Data
aining unlocked if the unlocking button is
n or close the vehicle using the remote control,
d page 95 or change the battery page 95.
control may be momentarily affected if there is
aveband (e.g. radiotelephone, mobile tele-
he vehicle.
ote control key
control key
button page 94, fig. 61 once.
vehicle using the key bit within one
pened and closed with the remote control if you
ig. 61 a long way outside the effective range
trol. The remote control key will have to be resyn-
e available from SEAT Service. They must be
m.
s can be used.
remote control page 94, fig. 61 does not
ushed, the battery must be replaced.
A1
A1
A4
alhambra_ingles_0708 Seite 95 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
WARNING
Never leave children or disabled persons in the vehicle; in case of emer- gency they may not be able to leave the vehicle or look after themselves.
Always take you car keys with you when you leave the vehicle. Misuse of the keys, for example, by children, may result in serious damage and accident.
The engine may accidentally be started and be out of control.
If the ignition is switched on, the electric equipment could be acti- vated with risk of injury, for example, in the electric windows.
The doors can be locked using the remote control key. This could result in people being trapped in the vehicle in an emergency.
Always take the key with you when you leave the vehicle.
Never remove the key from the ignition if the vehicle is in motion. Risk of accident. The steering lock could engage suddenly, and you would not be able to steer the vehicle.
Note An Authorised SEAT Service Centre can programme the individual
opening of doors. In this case, when the unlock button on the remote
control is pressed once, only the driver's door is unlocked page 89. When
the button is pressed once more, all doors and the tailgate will be unlocked.
Seat Service will be happy to provide more information on the activation of
this function.
The remote control transmitter and the batteries are integrated in the
remote control. The receiver is in the interior of the vehicle. Obstacles
between the remote control and the vehicle, bad weather conditions and
discharged batteries can considerably reduce the range of the remote control.
The remote control only locks and unlocks the vehicle when it is used
within range.
The vehicle will be locked again automatically if you do not open one of
the doors or the tailgate 30 seconds after unlocking the car. This function
prevents the vehicle from rem
pressed by mistake.
If it is not possible to ope
this should be re-synchronise
The working of the remote
transmitter using the same w
phone, etc) in the vicinity of t
Synchronising the rem
Synchronising the remote
Briefly press the open
Then open or close the
minute page 89.
The vehicle can no longer be o
press button page 94, f
of the radio wave remote con
chronised.
Spare remote control keys ar
matched to the locking syste
Up to four remote control key
Replacing the battery
If the battery indicator on the
flash when the buttons are p
Unlocking and locking96
ystem
t alarm system
gers an alarm if unauthorised move-
nd the vehicle.
larm
ng the unlock button on the remote
ition.
nically (emergency opening)
ction fails, you will have to use the key to
one as follows:
Fig. 62 Interior moni- toring system sensor
alhambra_ingles_0708 Seite 96 Mittwoch, 10. September 2008 10:55 10
We recommend having the batteries changed by a qualified workshop if
required.
Caution Use of inappropriate batteries may damage the remote control. For this
reason, always replace the dead battery with another of the same size and
power.
For the sake of the environment The flat batteries must be disposed of in accordance with regulations
governing the protection of the environment.
Anti-theft alarm s
Description of anti-thef
The anti-theft alarm trig
ments are detected arou
Activating the anti-theft a
Blocking the engine.
Deactivating the alarm
Unblock the vehicle usi
control or switch on ign
Opening the doors mecha
If the remote control fun
unlock the car. This is d
Unlocking and locking 97
Safety Fir Technical Data
onitoring system are located at the top of the
and rear door page 96, fig. 62 The sensors
will otherwise not be able to function properly.
when the interior monitoring system is active as
triggered by a draft of air.
f, access is gained to a second secured zone
ter a door has been opened), the warning signal
ns active even if the battery is disconnected or
alhambra_ingles_0708 Seite 97 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Press button page 94, fig. 61 to fold out the key bit.
Use the lock on the driver door to unlock the vehicle. The anti-
theft alarm system remains active, but an alarm is not triggered
immediately.
Switch on the ignition within 15 seconds. When the ignition is
switched on, the electronic immobiliser recognises a valid
vehicle key and deactivates the anti-theft alarm system. If you do
not switch on the ignition within 15 seconds, the alarm is trig-
gered.
The anti-theft alarm makes it more difficult to break into the vehicle or steal
it. Audible and visible alarms13) are triggered if the car is opened using the
mechanical key, or if unauthorised access is gained to the vehicle.
When does the system trigger an alarm?
The system triggers an alarm if the following unauthorised actions are carried
out when the car is locked:
Opening of vehicle using mechanical key without switching on ignition
within the next 15 seconds
Opening a door
Opening the bonnet
Opening the tailgate
Switching on the ignition
Movement inside the vehicle (in vehicles with interior monitoring).
The acoustic signals sound and the indicators flash for approx. 30 seconds.
Interior monitoring system
The sensors for the interior m
door post between the front
must not be covered, as they
The windows must be closed
the anti-theft alarm could be
Note If, after the alarm goes of
(e.g. the tailgate is opened af
is triggered again.
Vehicle monitoring remai
not working for any reason.
13) Optional equipment
A3
Unlocking and locking98
r while the vehicle is stationary or when you
lgate
will be locked by turning the vehicle key to
will be unlocked by turning the vehicle key to
of, which are still open can be closed automat-
d with electric windows and electric vent
ic sliding roof. To do this, the vehicle key must
fig. 63 until all windows and the sliding
n , all windows (apart from the electric vent
ehicles equipped with electric windows.
ntral locking system or the servomotor lock is
anually by turning the vehicle key to position
ilgate
ailgate when the ignition is on. This helps
ts). This function will remain active for approx.
is switched off as long as no door is opened.
ilgate immediately unlocks.
ossible to open the tailgate for up to 30
s been closed and the ignition is switched on.
AA
AB
alhambra_ingles_0708 Seite 98 Mittwoch, 10. September 2008 10:55 10
Tailgate
Opening the tailgate
Unlocking the tailgate
Make sure that the key slot is vertical.
Operate the handle and pull up the tailgate .
Closing the tailgate
Take hold of one of the recessed handles in the interior trim of the
tailgate.
Close the tailgate hard in Safety instructions for the tail-
gate on page 100.
A warning appears on the instrument panel14) if the tailgate is open or not
properly closed. Depending on the level of equipment fitted, an audible
warning14) will be given eithe
drive.
Locking and unlocking the tai
The doors and the tailgate
position fig. 63 .
The doors and the tailgate
position .
Key slot positions
Windows, or the sliding ro
ically on vehicles equippe
windows or with an electr
be kept held in position roof are fully closed.
If the key is held in positio
wing) will be opened on v
The tailgate can, if the ce
defective, be unlocked m
.
Convenience opening of the ta
It is not possible to open the t
prevent theft (e.g. at traffic ligh
30 seconds after the ignition
When a door is opened, the ta
For greater convenience, it is p
seconds after the last door ha
Fig. 63 Key slot positions of tailgate lock
14) Optional equipment
AA
AB
AA
AB
AC
AC
Unlocking and locking 99
Safety Fir Technical Data
, make sure that the key has not been left
the inside trim of the tailgate and
bi-instrument if the tailgate is not properly
operly. Risk of accident or injury.
by pushing it down with your hand on the atter. Risk of injury!
ked after closing. If not, it may open unexpect-
lay in or around the vehicle. A locked vehicle ly high and low temperatures, depending on
cause serious injuries/illness. It could even ose and lock both the tailgate and all the other g the vehicle.
ithout observing and ensuring it is clear, to do us injury to you and others. Make sure that no gate.
alhambra_ingles_0708 Seite 99 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Driving with the tailgate open
If the tailgate is open or incorrectly closed, the following warning may be
appear on the display14). Please note that theft of your cargo is more likely if
the tailgate is open.
WARNING
If you have to drive with the tailgate open, please observe the following warnings:
Observe the following points to reduce the danger of poisoning from exhaust fumes entering the vehicle interior:
Close all windows.
Close the sliding/tilting roof,
Switch off air recirculation.
Open the air outlets in the dash panel,
Set the fresh air blower to the highest speed.
Drive particularly carefully and think ahead. If possible, avoid sudden braking and driving manoeuvres as this could cause the open tailgate to move unpredictably. Risk of injury.
When carrying objects that protrude from the boot, the correct signals should be used; otherwise there is a risk of accident. Observe legal require- ments when doing so.
Always secure objects in the boot. Loose items could fall out of the vehicle and injure other road users.
If a baggage rack is fitted on the tailgate, it should be removed before travelling with the tailgate open.
Read and always observe the safety information concerning the use of the tailgate page 100.
Closing the tailgate
Before closing the tailgate
inside the boot.
Closing the tailgate
Take hold of the grip in
pull the tailgate down.
Pull hard.
A display appears in the com
closed 15).
WARNING
Always close the tailgate pr
Do not close the tailgate window. The glass could sh
Ensure the tailgate is loc edly while driving.
Never allow children to p can be subjected to extreme the time of year. This could have fatal consequences. Cl doors when you are not usin
Never close the tailgate w otherwise could cause serio one is in the path of the tail
15) Optional equipment
Unlocking and locking100
alhambra_ingles_0708 Seite 100 Mittwoch, 10. September 2008 10:55 10
Safety instructions for the tailgate
WARNING
For safety reasons, you should always keep the tailgate fully closed when driving. Always close the tailgate properly. Risk of accident or injury.
Ensure the tailgate is locked after closing. If not, it may open unexpect- edly while driving.
Never close the tailgate without observing and ensuring it is clear, to do otherwise could cause serious injury to you and others. Make sure that no one is in the path of the tailgate.
Loose objects which could fall out of the vehicle when the tailgate is opened could cause injury.
If you have objects (for example bicycles) on a rack fitted to the tailgate, you may not be able to open the tailgate fully, or the additional weight could close the tailgate. For this reason, you should support the tailgate or remove the objects from the rack. Risk of injury.
Never allow children to play in or around the vehicle. A locked vehicle can be subjected to extremely high and low temperatures, depending on the time of year. This could cause serious injuries/illness. It could even have fatal consequences. Close and lock both the tailgate and all the other doors when you are not using the vehicle. Make sure first that there is no one in the vehicle.
If you have to drive with the tailgate open, observe the all notes page 99 to reduce the risk, for example, of poisoning caused by exhaust fumes entering the passenger compartment.
Unlocking and locking 101
Safety Fir Technical Data
ows for approx. 10 minutes after switching off
er door nor the front passenger door has been
oor window with one-touch opening and closing
door window with one-touch opening and
tivating the electric window buttons in the rear
r left door16)
r right door16)
the driver door can be used to disable the elec-
ar doors.
ttons on rear doors are activated.
s on rear doors are deactivated.
windows can result in injury.
ithout observing and ensuring it is clear, to do us injury to you and others. Make sure that no w.
key with you when you leave the vehicle.
isabled persons in the vehicle, particularly if . Misuse of the keys, for example, by children, e and accident.
entally be started and be out of control.
alhambra_ingles_0708 Seite 101 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Windows
Opening and closing the windows electrically
All electric windows can be operated using the controls in the
driver door. The other doors each have a switch for their own
window.
Opening and closing the windows
Press button fig. 64 , , or to open the corre-
sponding window.
Pull button to close a window .
Always close the windows fully if you park the vehicle or leave it unattended
.
You can use the electric wind
the ignition if neither the driv
opened.
Buttons in the driver door
Button for the left front d
page 102
Button for the right front
closing page 102
Safety switch16) for deac
doors
Button for window in rea
Button for window in rea
Safety switch
Safety switch fig. 64 in
tric window buttons in the re
Safety switch not pressed: bu
Safety switch pressed: button
WARNING
Incorrect use of the electric
Never close the tailgate w otherwise could cause serio one is in the path of a windo
Always take the vehicle
Never leave children or d they have access to the keys may result in serious damag
The engine may accid
Fig. 64 Detail of driver door: buttons for front and rear electric windows
A1 A2 A4 A5
16) Optional equipment
A1
A2
A3
A4
A5
A3
Unlocking and locking102
e window briefly to the second position.
.
or the window briefly to the second posi-
fully.
ing and closing
and closing function is not active after
been disconnected or is empty and will
doors.
vehicle from outside and hold the key in
least one second. The one-touch function
ion.
the first stage, the window will open (or close)
you push or lift the button briefly to the second
ne-touch opening) or close (one-touch closing)
he button while the window is opening or
n.
osing function will not function once the igni-
ll-back function will not work if there is a
dows. Contact an Authorised Service Centre.
alhambra_ingles_0708 Seite 102 Mittwoch, 10. September 2008 10:55 10
If the ignition is switched on, the electric equipment could be acti- vated with risk of injury, for example, in the electric windows.
The doors can be locked using the remote control key. This could result in people being trapped in the vehicle in an emergency.
Always take the key with you when you leave the vehicle.
The electric windows will work until the ignition has been switched off and one of the front doors has been opened.
If necessary, use the safety switch to disable the rear electric windows. Make sure that they have been disabled.
Note If the window is not able to close because it is stiff or because of an obstruc-
tion, the window will automatically open again page 103. If this happens,
check why the window could not be closed before attempting to close it
again.
One-touch closing and opening
One-touch opening and closing means you do not have to
hold down the button.
The one-touch closing and opening of the electric windows can only
be controlled with the switches on the driver's door. The buttons
page 101, fig. 64 and have two levels for opening the
front windows and two for closing. This makes it easier to open or
close windows to the desired position.
One-touch closing
Pull up the button for th
The window closes fully
One-touch opening
Push down the button f
tion. The window opens
Restoring one-touch open
The one-touch opening
the vehicle battery has
have to be reset.
Close all windows and
Use the key to lock the
the lock position for at
is now ready for operat
If you push (or pull) a button to
until you release the button. If
stage, the window will open (o
automatically. If you operate t
closing, it stops at this positio
The one-touch opening and cl
tion has been switched off.
The one-touch function and ro
malfunction in the electric win
WARNING (continued)
A1 A2
Unlocking and locking 103
Safety Fir Technical Data
es not prevent fingers or other parts of the st the window frame. Risk of accident.
tivated if the windows are closed from the
he ignition key for convenience closing
nd closing
ened and closed centrally from
old the key in the door lock of the driver's
ing or the unlocking position until all
function are either opened or closed.
rrupt this function.
thout observing and ensuring it is clear, to do us injury to you and others. The windows will function if the convenience closing function is is in the path of a window.
alhambra_ingles_0708 Seite 103 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Roll-back function on electric windows*
The windows have a roll-back function. This reduces the risk
of injuries when the windows are closing.
If a window is obstructed when closing automatically, the window stops
at this point and opens immediately .
If this happens, check immediately (within 10 seconds) why the window
could not be closed before attempting to close it again. After 10 seconds, the
window's closing force is automatically increased.
If the window is still obstructed, the window stops at this point.
If there is no obvious reason why the window cannot be closed, try to
close it again within five seconds. The roll-back function is now deactivated. The window closes with maximum force.
If more than 5 seconds pass, the window will open fully when you operate one
of the buttons. One-touch closing is reactivated.
The one-touch function and roll-back function will not work if there is a
malfunction in the electric windows. Contact an Authorised Service Centre.
WARNING
Incorrect use of the electric windows can result in injury.
Always take the key with you when leaving the vehicle, even if you only intend to be gone for a short time. Please ensure that children are never left unsupervised in the vehicle.
The electric windows will work until the ignition has been switched off and one of the front doors has been opened.
Never close the windows without observing and ensuring it is clear, to do otherwise could cause serious injury to you and others. Make sure that no one is in the path of a window.
Never allow people to remain in the vehicle when you close the vehicle from the outside. The windows cannot be opened even in an emergency.
The roll-back function do body getting pinched again
Note The roll-back function is deac
outside of the vehicle using t
page 105.
Convenience opening a
The windows can be op
outside the vehicle.
Using the door lock: H door in either the lock
windows with electric
Release the key to inte
WARNING
Never close the windows wi otherwise could cause serio be closed with the rollback used. Make sure that no one
WARNING (continued)
Unlocking and locking104
roof
e sliding/tilting roof
s opened and closed using the switch
tched on.
of
. 66 .
unroof
roof
Fig. 66 Interior roof trim: control of sliding/tilting roof
A1
alhambra_ingles_0708 Seite 104 Mittwoch, 10. September 2008 10:55 10
Mechanical vent wings
The rear vent wings can be opened and closed manually.
Opening
Pull the release lever fig. 65 in the direction of the arrow and
push it out at the same time until the lever engages.
Closing
Pull the release lever in the opposite direction to the arrow and
push it back until the lever engages.
WARNING
Incorrect use of the vent wings can result in injury!
Never close the windows without observing and ensuring it is clear, to do otherwise could cause serious injury to you and others. Make sure that no one is in the path of a window.
Sliding/tilting sun
Opening and closing th
The sliding/tilting roof i
when the ignition is swi
Opening sliding/tilting ro
Press the surface fig
Tilting the sliding/tilting s
Press the surface .
Closing the sliding/tilting
Press the surface .
Fig. 65 Release lever for mechanical vent wing
A2
A3
Unlocking and locking 105
Safety Fir Technical Data
eep the key in the driver's door lock in the
sliding/tilting sunroof has closed.
rrupt this function.
first the windows and then the sliding roof will
g sunroof without observing and ensuring it is cause serious injury to you and others. The s with the roll-back function activated.
that no one is in the path of the sliding/tilting
tary button remains in the last position selected
venience closing from outside the vehicle and
the next time you drive.
alhambra_ingles_0708 Seite 105 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Always close the sliding/tilting roof fully if you park the vehicle or leave it
unattended .
If you wish to tilt the roof when the sliding roof is open, press surface until
the function has been carried out. If the sliding roof is to be opened directly
from the tilted position, press surface to carry out the required function.
Once the ignition has been switched off, the sliding/tilting sun roof can no
longer be opened or closed.
Sunroof blind
The sunroof blind is opened together with the sliding/tilting roof. If required,
it can be closed by hand when the sunroof is closed.
WARNING
Incorrect use of the sliding/tilting sunroof can result in injury.
Never close the sliding/tilting sunroof without observing and ensuring it is clear, to do otherwise could cause serious injury to you and others. Make sure that no one is in the path of the sliding/tilting sunroof.
Always take the vehicle key with you when you leave the vehicle.
Never leave children or disabled persons in the vehicle, particularly if they have access to the keys. Unsupervised use of a key could mean that the engine is started or that electrical equipment is used (e.g. electric windows). Risk of accident. The doors can be locked using the remote control key. This could result in people being trapped in the vehicle in an emergency.
The sliding/tilting sunroof operates as long as the ignition is switched on.
Note The roof can be closed by hand if the system is defective.
Convenience closing*
Using the door lock: k close position until the
Release the key to inte
During convenience closing,
be closed.
WARNING
Never close the sliding/tiltin clear, to do otherwise could sliding/tilting sunroof close However, always make sure sunroof.
Note The sliding/tilting sunroof ro
if the roof is closed using con
will have to be re-positioned
A2
A1
Unlocking and locking106
lting sunroof without observing and ensuring uld cause serious injury to you and others. he path of the sliding/tilting sunroof.
alhambra_ingles_0708 Seite 106 Mittwoch, 10. September 2008 10:55 10
Roll-back function of the sliding/tilting roof
The sliding/tilting roof has a roll-back function which prevents larger objects
getting trapped when the roof is closed. The roll-back function does
not prevent fingers getting pinched against the roof opening. The
sliding/tilting sunroof stops and opens again immediately if it is obstructed
when closing.
If the sliding/tilting roof has been opened again by the roll-back function, it
can be closed only by pressing button page 104, fig. 66 until the
sliding/tilting roof has closed fully. The sliding/tilting roof then closes without the roll-back function.
If it still does not close, consult a specialised workshop.
WARNING
Incorrect use of the sliding/tilting sunroof can result in injury.
Never close the sliding/ti it is clear, to do otherwise co Make sure that no one is in t
Fig. 67 Interior roof trim: control of sliding/tilting roof
A3
WARNING (continued)
Unlocking and locking 107
Safety Fir Technical Data
ht To do so, insert a screwdriver on the
en the light and the covering and turn the
head and undo the two Philips screws
direction of the arrow and remove
g. 69 of the lever opening in the direction
its casing, insert it in the opening and
casing and turn the cover fig. 69
.
interior light.
A1
A2
AA
alhambra_ingles_0708 Seite 107 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Manual release
In the event of a breakdown, the sunroof may be closed manually.
Remove the interior lig
right-hand side, betwe
screwdriver.
Invert the screwdriver
fig. 68.
Move the cover in the
fig. 68.
Turn the cover fi
of the arrow.
Remove the lever from
close the roof.
Replace the lever in its
over the lever opening
Replace the cover and
Fig. 68 Manual release
Fig. 69 Manual release
AA
Lights and visibility108
position O.
lights17)
osition or to the first stop. The
witch lights up.
lights (vehicles with no front fog lights)
sition to the last stop. A warning lamp
ent panel.
lights (vehicles with front fog lights)
osition or to the second stop. A
in the control panel.
will only work with the ignition on. The head-
ed to the side light setting while the engine is
ition has been switched off.
utomatically comes on when the ignition is
ry to turn on the light switch. The daylight
as long as the ignition is switched on.
that it may dazzles drivers behind. You should
n visibility is very poor.
alhambra_ingles_0708 Seite 108 Mittwoch, 10. September 2008 10:55 10
Lights and visibility
Lights
Switching lights on and off
Switching on the daylight driving light (only available in some countries)
To switch on the daylight driving lights, leave the light switch in
position O when you turn on the ignition.
Switching on the side lights
Turn the light switch fig. 70 to position .
Switching on dipped headlights
Turn the light switch to position .
Switching off the lights
Turn the light switch to
Switching on the front fog
Pull the switch out of p
symbol in the light s
Switching on the rear fog
Pull the switch out of po
lights up in the instrum
Switching on the rear fog
Pull the switch out of p
warning lamp lights up
The dipped beam headlights
lights are automatically switch
being started and after the ign
The daylight driving light18) a
switched on. It is not necessa
driving lights are switched on
Rear fog light
The rear fog light is so bright
use the rear fog light only whe
Fig. 70 Detailed view of dash panel lights, fog light and rear fog light control
17) Optional equipment 18) for selected markets only
Lights and visibility 109
Safety Fir Technical Data
ts.
nal lever towards the steering wheel
minutes after switching off the lights.
ned, the vehicle lights automatically light up for
is closed within 3 minutes, the guide lights will
seconds. If the door is closed after 3 minutes,
nd the guide lights are not activated.
ents and switches and headlight
Fig. 71 Instrument panel: headlight range control
and illumination of instruments and switches A1
A2
alhambra_ingles_0708 Seite 109 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
If you are towing a trailer equipped with a rear fog light on a vehicle with a
factory-fitted towing bracket17), the rear fog light on the car will automatically
be switched off.
WARNING
Never drive with just the side lights on. Risk of accident. The side lights are not bright enough to illuminate the road ahead and to ensure that other road users are able to see you. Always use your dipped headlights if it is dark or if visibility is poor.
Note If the lights are left on after the key has been taken out of the ignition lock,
a buzzer sounds when the driver door is opened. This is a reminder to switch
off the lights.
The rear fog light is so bright that it can dazzle drivers behind you. You
should use the rear fog light only when visibility is very poor.
If you are towing a trailer equipped with a rear fog light on a vehicle with
a factory-fitted towing bracket, the rear fog light on the car will automatically
be switched off.
The use of the lighting described here is subject to the relevant statutory
requirements.
Coming Home function (guide lights)
The Coming Home function (guide lights) allows the vehicle
lights to stay on for approximately 3 minutes after the ignition
is switched off.
To activate the Coming Home function the vehicle lights should have
already been switched on.
Switch off vehicle ligh
Switch off ignition.
Keep all doors closed.
Briefly pull the turn sig
within a maximum of 2
Open the driver door.
When the driver's door is ope
approx. 3 minutes. If the door
stay on for approximately. 30
the vehicle lights switch off a
Illumination of instrum range control
Lights and visibility110
rivers, the dipped light should be adjusted using the headlight range control. If not, an
e light cone, depending on the vehicle load.
ts are used to draw the attention of
vehicle in emergencies.
afe distance from moving traffic.
72 to switch on the hazard warning lights
Fig. 72 Switch for hazard warning lights
alhambra_ingles_0708 Seite 110 Mittwoch, 10. September 2008 10:55 10
Illumination of instruments and switches
When the headlights are switched on, the brightness of the instruments and
switch lighting can be regulated to suit your requirements by turning the
switch page 109, fig. 71 .
Headlight range control
Using the headlight range control, you can adjust the headlight range to the
load level that is being carried in the vehicle. In this way it is possible to avoid
dazzling oncoming traffic more than necessary. At the same time, the driver
has the best possible lighting for the road ahead using the correct headlight
settings.
The headlights can only be adjusted when the dipped beam is switched on.
To lower the beam, turn the switch down from the basic setting 0.
If the vehicle load does not correspond to those shown in the table, it is
possible to select intermediary positions.
Dynamic headlight range control
Vehicles with gas discharge lamps19) (xenon lamps) are equipped with
dynamic headlight range control. When the dipped light is switched on, the
range of the headlights adjusts to the vehicle load condition. In these vehi-
cles, the control is not available.
WARNING
In order not to dazzle other d according to the vehicle load accident may occur.
Use the switch to lower th
Hazard warning lights
The hazard warning ligh
other road users to your
If you have a breakdown:
1. Park your vehicle at a s
2. Press button fig.
.
The settings on the switch correspond roughly to the following load condi- tions:
- Front seats occupied and light luggage in the vehicle
1 Several seats occupied and light luggage in the vehicle
2 All seats occupied and heavy luggage in luggage compartment
3 Front seats occupied and heavy luggage in luggage compart-
ment
19) Optional equipment
A1
A1
A2
A2
A2
Lights and visibility 111
Safety Fir Technical Data
if the hazard warning lights are left on for a long
witched off.
ts are not working, you must use an alternative
to your vehicle. This method must comply with
ning lights described here is subject to the rele-
eam headlight lever
in beam lever also operates the
headlight flasher.
beam headlight lever has the following
Fig. 73 Turn signal and main beam headlight lever
alhambra_ingles_0708 Seite 111 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
3. Switch the engine off.
4. Apply the handbrake firmly.
5. On a manual gearbox engage 1st gear. On an automatic move
the selector lever to P.
6. Use the warning triangle to draw the attention of other road users
to your vehicle.
7. Always take the key with you when you leave the vehicle.
You should switch on the hazard warning lights to warn other road users, for
instance when:
reaching the tail end of a traffic jam
there is an emergency
your vehicle breaks down due to a technical defect
you are towing another vehicle or your vehicle is being towed.
All turn signals flash simultaneously when the hazard warning lights are
switched on. The turn signal lights and the button warning light will
also flash. The hazard warning lights also work when the ignition is switched
off.
WARNING
The risk of an accident increases if your vehicle breaks down. Always use the hazard warning lights and a warning triangle to draw the attention of other road users to your stationary vehicle.
Never park where the catalytic converter could come into contact with inflammable materials under the vehicle, for example dry grass or spilt petrol. This could start a fire!
Note The battery will run down
time - even if the ignition is s
If the hazard warning ligh
method of drawing attention
traffic legislation.
The use of the hazard war
vant statutory requirements.
Turn signal and main b
The turn signal and ma
parking lights and the
The turn signal and main
functions:
Lights and visibility112
when the ignition is switched on. The corre-
flashes in the combi-instrument. The warning
turn signals are operated, provided a trailer is
ted to the vehicle. If a turn signal bulb is defec-
at double speed. If the trailer turn signal bulbs
does not light up. You should have the bulbs
sh at the same time when the hazard warning
ether that of the vehicle or of the trailer, the
g twice as fast.
can only be switched on if the dipped beam
warning lamp then comes on in the combi-
es on for as long as you pull the lever even if
n. The warning lamp then comes on in the
switched on, the front side light and the rear
e of the vehicle stay lit. The parking lights will
d from the ignition.
ft on after the key has been taken out of the
when the driver door is opened. This is a
signal, unless of course you wish to leave the
alhambra_ingles_0708 Seite 112 Mittwoch, 10. September 2008 10:55 10
Switching on the turn signals
Move the lever all the way up page 111, fig. 73 to indicate
right, and all the way down to indicate left.
Signalling a lane change
Move the lever upwards or downwards to change lanes.
Switching main beam on and off
Turn the light switch to position page 108, fig. 70.
Press the lever forward to switch on the main beams.
Pull the lever back towards you to switch the main beam head-
lights off again.
Headlight flasher
Pull the lever towards the steering wheel to operate the
flasher.
Switching on parking lights
Switch off the ignition and remove the key from the lock.
Move the lever up or down to turn on the right or left-hand
parking lights respectively.
WARNING
The main beam can dazzle other drivers. Risk of accident! Never use the main beam headlights or the headlight flasher if they could dazzle other drivers.
Note The turn signals only work
sponding warning lamp or
lamp 20) flashes when the
correctly attached and connec
tive, the warning lamp flashes
are damaged, warning lamp
replaced.
Both warning lamps will fla
lights are switched on.
If one turn signal fails, wh
warning lamp will start flashin
The main beam headlights
headlights are already on. The
instrument.
The headlight flasher com
no other lights are switched o
combi-instrument.
When the parking light is
light of the corresponding sid
only work if the key is remove
If the turn signal lever is le
ignition lock, a buzzer sounds
reminder to switch off the turn
parking light on.
A1
A2
A1 A2
A3
A4
20) Optional equipment
Lights and visibility 113
Safety Fir Technical Data
tically switched on when the vehicle is unlocked
off about 20 seconds after the closure of the
the vehicle is locked or when the ignition is
ocker switch to switch the interior lights at front
t
rmediary position, the front and rear lights are
ssenger
t passenger is switched on and off with the
er compartment
each rear door fig. 75.
reading light is switched on or off.
the front passenger side will only light up if the
e glove box is open.
ng
matically when the tailgate21) is opened and is
.
alhambra_ingles_0708 Seite 113 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Interior lights and reading lights
The rocker control fig. 74 for the interior lights has the following posi-
tions: permanently lit , door contact connection and off.
Courtesy light position
The interior lights are automa
or a door is opened. and turn
doors. They also go off when
switched on.
Interior light switched on
Press the symbol on the r
and rear on permanently.
Switching off the interior ligh
When the switch is in the inte
permanently switched off.
Reading light for the front pa
The reading light for the fron
button fig. 74 .
Reading light in the passeng
There is a reading light above
Using the button -arrow- the
Glove compartment light
The light in the glove box on
lights are switched on and th
Luggage compartment lighti
The light is switched on auto
switched off when it is closed
Fig. 74 Interior roof trim: Interior lighting and reading light in the front of vehicle
Fig. 75 Reading light in the passenger compart- ment
AA
21) Optional equipment
AB
Lights and visibility114
ight
ion (left reading light) or to position
.
tion . The interior lights are automati-
the vehicle is unlocked or the key
ion lock The light turns off about 20
re of the doors. The interior lights are
ehicle is locked or when the ignition is
ing lights switched on
tion .
d front passenger can be folded down or pulled
ned towards the doors.
n visors have covers. When you open the cover
up.
e cover of the make-up mirror is closed.
hould make sure that the make-up mirror cover
vents the battery discharging.
A2
A3
A5
alhambra_ingles_0708 Seite 114 Mittwoch, 10. September 2008 10:55 10
Note If not all the vehicle doors are closed, the interior lights will be switched
off after approx. 10 minutes, providing the key has been removed and the
courtesy light position selected. This prevents the battery discharging.
Reading lights function independently of the interior lights and must be
switched off manually to prevent the battery being drained when the engine
is switched off.
Interior light
Interior light permanently switched off
In switch position fig. 76, the interior and reading lights
are switched off.
Switching on the reading l
Turn the switch to posit
(right reading light)
Door light position
Turn the control to posi
cally switched on when
removed from the ignit
seconds after the closu
switched off when the v
switched on.
Interior lights or both read
Turn the control to posi
Visibility
Sun visors
The sun visors for the driver an
out of their mountings and tur
The make-up mirrors in the su
, a lamp* in the roof lights
The roof light goes off when th
Note Before you leave the car, you s
in the visor is closed. This pre
Fig. 76 Interior light
A1
A4
A2
Lights and visibility 115
Safety Fir Technical Data
the central console while the engine is running
heating. A symbol in the button lights up when
itched on.
itched off automatically after a delay of approx.
heating works only when the engine is running.
ent heating blower will be switched off when the
ed on.
air conditioning system page 152 the wind-
tomatically switched on for a maximum of 4
outside weather conditions, to aid deicing.
Fig. 78 Centre console: windscreen heating button
alhambra_ingles_0708 Seite 115 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Rear window heating
To connect the rear window heater, press the button fig. 77 on the
console with the ignition on. A symbol in the button lights up when the rear
window heating is switched on.
The rear window heating is switched off after a delay of approx. 20 minutes.
It can also be switched off beforehand by pushing the button.
Windscreen heating*
Press button fig. 78 in
to switch on the windscreen
the windscreen heating is sw
The windscreen heating is sw
10 minutes. The windscreen
Note The passenger compartm
windscreen heating is switch
In vehicles fitted with an
screen heating function is au
minutes depending upon the
Fig. 77 Centre console: rear window heating button
Lights and visibility116
sition .
sition .
position to give the windscreen a brief
her system
n . A jet of water will be sprayed on the
ver is held in this position.
ipers will keep running for approximately
ion .
obstruct visibility and reduce safety levels.
ould not use the wash / wipe system unless reen with the heating and ventilation system. wise freeze on the windscreen and obscure
hanging wiper blades.
A2
A3
A4
A5
A0
alhambra_ingles_0708 Seite 116 Mittwoch, 10. September 2008 10:55 10
Windscreen washers
Windscreen wiper
The windscreen wiper lever controls the windscreen wipers
and the automatic wash and wipe.
The windscreen wiper lever fig. 79 has the following positions:
Intermittent wipe
Move the lever up to position .
Move the control to the left or right to set the length of the
intervals. Control to the left: long intervals; control to the right:
short intervals. Four wiper interval stages can be set using switch
.
Slow wipe
Move the lever up to po
Continuous wipe
Move the lever up to po
Brief wipe
Move the lever down to
wipe.
Windscreen wiper and was
Pull the lever to positio
windscreen while the le
Release the lever. The w
4 seconds.
Switching off the wipers
Move the lever to posit
WARNING
Worn and dirty wiper blades
In cold conditions, you sh you have warmed the windsc The washer fluid could other your view of the road.
Observe the warnings C
Fig. 79 Windscreen wiper and windscreen wash lever
A1
AA
AA
Lights and visibility 117
Safety Fir Technical Data
wipe function
position towards the steering wheel.
to function for a short period if you switch
re in motion.
automatic wipe
rwards to position fig. 80 . The rear
o work immediately while the rear window
r and continues working while the lever is
wiper then wipes for approximately 4
ntervals again.
de will obstruct visibility and reduce safety.
hanging wiper blades.
k that the wiper blade is not frozen to the glass
first time. If you switch on the wiper when the
lass, this could damage both the wiper blade
ll only function when the ignition is switched on
automatically connected when the windscreen
is engaged (manual gearbox) or the selector
ox is placed in position R.
A6
A7
alhambra_ingles_0708 Seite 117 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Caution In icy conditions, always check that the wiper blades are not frozen to the
glass before using the wipers for the first time. If you switch on the wipers
when the wiper blades are frozen to the windscreen, you could damage both
the wiper blades and the wiper motor.
Rear window wiper
The windscreen wiper lever controls the rear window wipers
and the automatic rear window wash and wipe.
Connecting the intermittent wipe
Press the lever forwards to position fig. 80 . The wiper will
wipe the window approximately every 6 seconds.
Switching off the interval
Pull the lever back from
The wiper will continue
off whilst the wipers a
Connect the rear window
Press the lever fully fo
window washer starts t
wiper starts a little late
in this position.
Release the lever. The
seconds, and then in i
WARNING
A worn or dirty wiper bla
Observe the warnings C
Caution In icy conditions, always chec
before using the wiper for the
wiper blade is frozen to the g
and the wiper motor.
Note The rear window wiper wi
and the tailgate is closed.
The rear window wiper is
wiper is on and reverse gear
lever of the automatic gear b
Fig. 80 Windscreen wiper and windscreen wash lever rear window wiper
A6
Lights and visibility118
if you cannot see clearly through the
or interior mirror
standard position, the lever on the lower edge
rds. Pull the lever to the back to select the anti-
n for interior mirror22)
terior mirror will darken automatically
ht it receives. The mirror will return to the
gear is selected.
Fig. 81 Automatic anti- dazzle function for inte- rior mirror
alhambra_ingles_0708 Seite 118 Mittwoch, 10. September 2008 10:55 10
Headlamp washer*
The headlight washers clean the headlight lenses.
The headlight washers are activated automatically when the windscreen
washer is used and the windscreen wiper lever is pulled towards the steering
wheel page 116, fig. 79 for at least 5 seconds provided the dipped
headlights or main beams are switched on. Clean off stubborn dirt (insects,
etc.) from the headlights at regular intervals, for instance when filling the fuel
tank.
Note To ensure that the headlight washers work properly in winter, keep the
nozzles in the bumper free of snow and remove any ice with a de-icer spray.
Mirrors
Interior mirror
It is dangerous to drive
rear window.
Manual anti-dazzle function f
When the rear-view mirror is in
of the mirror should face forwa
dazzle function.
Automatic anti-dazzle functio
When the ignition is on, the in
according to the amount of lig
normal position if the reverse
A5
22) Optional equipment
Lights and visibility 119
Safety Fir Technical Data
to position the mirror so that you have a
f the car .
or housings23)
to fold in the wing mirrors electri-
out23)
er position to fold the exterior mirrors back
r adjustment23)
position (left exterior mirror).
position the mirror so that you have a
f the vehicle. The right exterior mirror will
e time (synchronised). If necessary the
tment may need correcting.
heated while the rear window heater
are switched on.
aspheric mirror increase the field of vision smaller and further away in the mirrors. If you te the distance to vehicles behind you when
ke a mistake. Risk of accident.
AA
AL
alhambra_ingles_0708 Seite 119 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
This function can be activated and deactivated by pressing the rearview
mirror switch page 118, fig. 81 . When it is activated, the warning lamp
lights up .
Exterior mirrors
The exterior mirrors can be adjusted using the rotary knob in
the driver's door.
Basic setting of exterior mirrors
1. Turn knob fig. 82 to position (left exterior mirror).
2. Turn the rotary knob to position the mirror so that you have a
good view to the rear of the vehicle.
3. Turn knob to position (right exterior mirror).
4. Swivel the rotary knob
good view to the rear o
Electric folding wing mirr
Turn knob to position
cally.
Folding wing mirrors back
Turn the knob to anoth
out.
Synchronised wing mirro
1. Turn the control to the
2. Turn the rotary knob to
good view to the rear o
be adjusted at the sam
right wing mirror adjus
Heated wing mirrors23)
The heated wing mirrors are
page 115 and the ignition
WARNING
The rear view convex or however the objects appear use these mirrors to estima changing lane, you could ma
A1
A2
Fig. 82 Detail of driver door: wing mirror controls
AL
AR
23) Optional equipment
Lights and visibility120
alhambra_ingles_0708 Seite 120 Mittwoch, 10. September 2008 10:55 10
If possible, use the interior mirror to estimate distances to vehicles behind you.
Make sure that you do not get your finger trapped between the mirror and the mirror base when folding back the mirrors. Risk of injury!
For the sake of the environment The exterior mirror heating should be switched off when it is no longer
needed. Fuel is wasted otherwise.
Note If the electrical adjustment ever fails to operate, the mirrors can be
adjusted by hand by lightly pressing the edge of the mirror glass.
In vehicles with electric wing mirrors, the following points should be
observed: if, due to an external force (e.g. a knock while manoeuvring), the
adjustment of the mirror housing is altered, the mirror will have to be
completely folded electrically. Do not readjust the mirror housing by hand, as
this will interfere with the mirror adjuster function.
WARNING (continued)
Seats and stowage 121
Safety Fir Technical Data
hicle must properly fasten and wear the seat eat. Children must be protected with an appro- . Section Child Safety
straints must always be adjusted to body size s be properly adjusted to provide you and your rotection.
the footwell when the vehicle is moving; never l, out of the window or on the seat. This also correct sitting position exposes you to an
e event of a braking manoeuvre or an accident. could sustain fatal injuries due to an improper
ver and front passenger to maintain a distance eering wheel or dash panel. Failure to respect s that the airbag will not protect you. Risk of
tween the driver and the steering wheel or r and the dash panel should always be as great
t passenger seat only when the vehicle is eat could move unexpectedly while the vehicle se the risk of an accident and therefore injury. your seat, you will assume an incorrect sitting nts.
to installing a child seat on the front lling a child seat, observe the warning note in
of seats may, for safety reasons, only be used cover has been removed.
alhambra_ingles_0708 Seite 121 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Seats and stowage
The importance of correct seat adjustment
Proper seat adjustment optimises the level of protection
offered by seat belts and airbags.
The driver seat, front passenger seat, and seats in the passenger compart-
ment, can be adjusted in many ways to suit the physical requirements of the
vehicle occupants. The correct seat position is very important for:
fast and easy operation of all controls on the instrument panel,
relaxed posture that does not cause drowsiness,
safe driving,
optimum protection from the seat belts and airbag system page 7.
Vehicle seats
Your vehicle has a total of five or seven24) seats.
First row of seats: two seats
Second row of seats: three seats
Third row of seats24): two seats
Each seat is equipped with a three-point seat belt.
WARNING
If the driver and passengers assume improper sitting positions, they may sustain critical injuries.
Never transport more people than there are seats available in the vehicle.
Every occupant in the ve belt belonging to his or her s priate child restraint system
The seats and all head re and the seat belt must alway passengers with optimum p
Always keep your feet in rest them on the dash pane applies to passengers. An in increased risk of injury in th If the airbag is triggered, you sitting position.
It is important for the dri of at least 25 cm from the st the minimum distance mean fatal injury. The distance be between the front passenge as possible.
Adjust the driver or fron stationary. Otherwise your s is moving. This could increa In addition, while adjusting position. Risk of fatal accide
Special guidelines apply passenger seat. When insta Child safety.
The seats in the third row if the luggage compartment
24) Optional equipment
WARNING (continued)
Seats and stowage122
nt so that its upper edge is at the same
head fig. 83 and fig. 84.
page 123.
raints removed or improperly adjusted njuries.
restraints could lead to death in the event of
restraints also increase the risk of injury driving or braking manoeuvres.
always be adjusted according to the occu-
Fig. 84 Side view: head restraints and seat belts correctly adjusted
alhambra_ingles_0708 Seite 122 Mittwoch, 10. September 2008 10:55 10
Head restraints
Correct adjustment of head restraints
Properly adjusted head restraints are an important part of
occupant protection and can reduce the risk of injuries in
most accident situations.
Adjust the head restrai
level as the top of your
Adjusting the head restraints
WARNING
Travelling with the head rest increases the risk of severe i
Improperly adjusted head a collision or accident.
Incorrectly adjusted head during sudden or unexpected
The head restraints must pant's size.
Fig. 83 Front view: head restraints and seat belts correctly adjusted
Seats and stowage 123
Safety Fir Technical Data
of fitting without releasing the button.
nt into the guides on the rear backrest.
fig. 85 (arrow) and push the head
s it will go.
int to suit body size.
aints have been removed. Risk of injury.
estraint, you must always adjust it properly for rotection.
y warnings page 122, Correct adjustment
alhambra_ingles_0708 Seite 123 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Removing or adjusting head restraints
The head restraints can be adjusted by moving them up and
down.
Adjusting height
Hold the side of the head restraint.
Push the head restraint up (in the direction of the arrow) or push
it down with the button pressed fig. 85 (arrow). Correct setting
page 122.
Make sure that the head restraint engages securely in position.
Removing the head restraint
Push the head restraint up as far as it will go.
Press the button fig. 85 -arrow-.
Pull head restraint out
Fitting the head restraint
Insert the head restrai
Press and hold button
restraint down as far a
Adjust the head restra
WARNING
Never drive if the head restr
After refitting the head r height to achieve optimal p
Please observe the safet of head restraints.
Fig. 85 Adjusting and removing the head restraints
Seats and stowage124
upport25)
backrest and turn the hand wheel.
to its lowest position and push the seat
just the backrest fully forward so that it
wheel when turning the seat round.
rn the seat round .
ht
h down (several times if necessary) from
adjusts the seat height in stages.
5)
nderneath the arm rest to adjust it to the
d area is determined by the settings made in
rts the natural curvature of the spine very effec-
front passenger seat while the vehicle is in seat, you will assume an incorrect sitting t the driver or front passenger seat only when
alhambra_ingles_0708 Seite 124 Mittwoch, 10. September 2008 10:55 10
Front seats
Adjusting front seats
The control elements fig. 86 are mirrored for the front right-hand
seat.
Adjusting the seat forwards and backwards
Pull up the lever and move the seat forwards or backwards
.
Then release the grip and move the seat further until the
catch engages.
Adjusting the backrest angle
Take your weight off the backrest and turn the hand wheel.
Adjusting the lumbar s
Take your weight off the
Turning the seat25)
Adjust the seat surface
back as far as it will go.
On the driver's seat, ad
will not hit the steering
Lift the lever and tu
Adjusting the seat heig
Pull the lever up or pus
its home position. This
Adjusting the armrest2
Turn the thumb wheel u
size of the occupant.
The curvature of the cushione
the lumbar region. This suppo
tively.
WARNING
Never adjust the driver or motion. While adjusting your position. Risk of injury. Adjus the vehicle is stationary.
Fig. 86 Front left seat controls
A1
A1
A2
25) Optional equipment
A3
A4
A4
A5
A6
Seats and stowage 125
Safety Fir Technical Data
backrests of the front seats can be
witch fig. 87 to switch on the seat
ing is switched off in the 0 position.
hen the ignition is switched on. The left switch
and the right switch the right seat heating.
g elements, please do not kneel on the seat or
gle point to the seat cushion and backrest.
Fig. 87 Centre console: Seat heating controls
alhambra_ingles_0708 Seite 125 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
To reduce the risk of injury to the driver and front passenger during sudden braking manoeuvres or an accident, never drive with the backrest tilted far back. Risk of injury. The maximum protection of the seat belt can be achieved only when the backrests are in an upright position and the driver and front passenger have properly adjusted their seat belts. The further the backrests are tilted to the rear, the greater the risk of injury due to improper positioning of the belt web!
Exercise caution when adjusting the seat height or forwards/back- wards position. Injuries can be caused if the backrest is tilted without due care and attention.
Never turn the driver or front passenger seat while the vehicle is in motion. While adjusting your seat, you will assume an incorrect sitting position. Risk of injury. Only turn the driver or passenger seats when the vehicle is stationary.
When the vehicle is in motion, the rotating front seats must be securely engaged and facing the direction of travel. These front seats may be used only when the vehicle is stationary.
Caution The driver seat and front passenger seat must not be occupied while they are
being turned. If the seat is occupied when it is turned, it could be damaged.
Seat heating
The seat cushions and
heated electrically.
Turn the appropriate s
heating. The seat heat
The seat heating only works w
controls the left seat heating
Caution To avoid damaging the heatin
apply sharp pressure at a sin
WARNING (continued)
Seats and stowage126
oved page 129,
t
seat have the same functions as the conven-
tegrated child seat is described in Safety
. 88 Maximum number of seats in the Alhambra
alhambra_ingles_0708 Seite 126 Mittwoch, 10. September 2008 10:55 10
Rear seats
Characteristics of seat equipment
The seats in the passenger compartment have the following features,
depending on the equipment level:
Integrated three-point seat belt with adjustable latch plate holder,
Integrated ISOFIX anchor points for a child seat,
Height-adjustable head restraints page 122,
Room for just one person,
Adjustable armrests26),
Individual seats can be rem
Integrated child seats26).
Seat with integrated child sea
Seats with an integrated child
tional individual seats. The in
first.
Seat layout
Second row, left seat.
Third row, left seat.
Second row, centre seat.
26) Optional equipment
Fig
A1
A2
A3
Seats and stowage 127
Safety Fir Technical Data
seat is securely engaged.
djusting the seat backwards and forwards! backrest is tilted without due care and atten-
n the vehicle is stationary. Otherwise your seat hile the vehicle is moving. This could increase herefore injury.
commendations concerning seats
alhambra_ingles_0708 Seite 127 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Second row, right seat.27)
Third row, right seat27).
Notes on the installation of the seats
Seats and are of the same construction and thus interchangeable.
Seats and are of the same construction and thus interchangeable.
Seat can be installed in positions .
Seat can be installed in place of seats , , and .
Moving seats
Make sure that the vehicle is not on a steep slope.
Pull the unlock lever fig. 89 upwards, in the direction of the
arrow, and hold in this position.
Move the seat.
Release the lever.
Always ensure that the
WARNING
Please be careful when a Injuries can be caused if the tion.
Adjust the seat only whe could move unexpectedly w the risk of an accident and t
Please observe safety re page 131.
27) Optional equipment
A4
A5
A1 A2
A4 A5
A2 A1
A3 A1 A2 A4 A5
Fig. 89 Adjustment of the seat forwards and back- wards
Seats and stowage128
t forwards
the seat surface fig. 90 up or press
e of the seat fig. 91 down.
n until the backrest engages.
down as far as it will go page 123.
s.
the seating surface fig. 90 up or
r side of the seat fig. 91 down.
it engages in the rear floor anchorings.
re that it is properly engaged in the floor
nt to suit body size.
tion when folded forwards. That is why the
r pulled or pushed again to push the backrest
A2
A2
A3
A3
alhambra_ingles_0708 Seite 128 Mittwoch, 10. September 2008 10:55 10
Folding the backrest and the seat forwards
There are two ways to fold the backrest and lift the seat.
Folding the individual sea
Pull the release lever at
the lever on the rear sid
Press the backrest dow
Folding seat forward
Push the head restraint
Fold down the backrest
Pull the release lever at
pull the loop on the rea
Fold the seat forwards.
Folding seat back
Fold the seat back until
Fold back the backrest.
Pull the seat up to ensu
anchorings
Adjust the head restrai
The backrest is locked in posi
release lever must be eithe
up again.
Fig. 90 Side of seat: fold the backrest and lift seat forwards
Fig. 91 Rear of seat: fold the backrest and lift seat forwards
A2
Seats and stowage 129
Safety Fir Technical Data
eat
t down as far as it will go page 123.
ts page 128.
page 128.
in the third row28), push the seat back as
wards as far as it will go when removing a
.
ig. 92 under the seat together in the direc-
ift the seat out of the floor anchorings.
ath the seat together in the direction of
m in this position.
Fig. 93 Assembling seat: bar and retaining bolts
alhambra_ingles_0708 Seite 129 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
WARNING
If you do not hold the backrest firmly when you operate the lever for adjusting the backrest angle, the backrest will be pushed forward by springs. Risk of injury.
Always hold the backrest firmly when you adjust the backrest angle.
Please observe safety recommendations concerning seats page 131.
Removing and fitting individual seats
The seats can be fitted and removed more easily by two
people than by one person. Removing an individual s
Push the head restrain
Fold down the backres
Fold the seat forwards
When removing a seat
far as it will go and for
seat in the second row
Push the two bars f
tion of the arrow and l
Assembling seat
Push the bars underne
the arrow and hold the
Fig. 92 Bar for removing and installing the indi- vidual seat
28) Optional equipment
Seats and stowage130
Fig. 94 Removable armrest: button
Fig. 95 Protective bag for the removable armrests
alhambra_ingles_0708 Seite 130 Mittwoch, 10. September 2008 10:55 10
Place the seat frame page 129, fig. 93 between the
retaining bolts in the floor anchorings and release both bars.
Pull the seat up to ensure that it is properly engaged in the front
floor anchorings
Fold the seat back until it engages in the rear floor anchorings.
Fold the backrest back and adjust the head restraint to suit body
size.
Covers for the floor anchorings
After removing the seats in the passenger compartment, it is possible to fix
covers to the floor anchorings to stop dirt getting into them, for example. You
will receive 12 covers delivered with the vehicle.
Guide the cover into the floor anchoring and press it in.
The covers will have to be removed by levering them off with the vehicle key
before you can install the seats.
WARNING
Please observe safety recommendations concerning seats page 131.
ArmrestsAA
AB
Seats and stowage 131
Safety Fir Technical Data
seats
the seats in the passenger compartment only re fulfilled at the same time:
s be fitted in the appropriate floor anchorings gaged.
ts must be in the upright position and securely .
ust have access to the seat belts. The seat ectly.
e vehicle must be correctly seated while
moved can cause injury if it is transported in always be fitted in the floor anchorings and The backrest must be in an upright position. If secured, it could become a life-threatening nts.
feet of seats are not soiled or damaged when
ats, including fitting and removal, may be hicle is stationary.
alhambra_ingles_0708 Seite 131 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Adjusting the armrest
Turn the thumb wheel underneath the armrests to adjust the
angle of the armrests to your requirement.
Removable armrest*29)
Take hold of the armrest at the rear and press the button
page 130, fig. 94 in the direction of the arrow.
With the button pressed, pull the armrest off to the side out of the
holder.
When installing, please ensure that the armrest engages
securely in the holder.
The removable armrests for the second row of seats can be found in a trans-
port bag page 130, fig. 95.
The bag hangs from a head restraint of a seat in the last row of seats or, in
vehicles with 4 integrated child seats29), on the centre seat of the second row
of seats.
WARNING
The transport bag should always be secured properly when travelling in the vehicle as it could otherwise be a safety risk in an accident or braking manoeuvre. We recommend that you keep the bag at home.
The bag, if you do decide to keep it in the vehicle, may not be secured to the head restraint of an integrated child seat. The backrest could be forced forward in an accident or braking manoeuvre due to the weight of the bag.
Safety instructions for
WARNING
Occupants may travel on if the following conditions a
The seats must alway and must be securely en
The backrest of all sea engaged in this position
The seat occupants m belts must be fitted corr
All the occupants of th driving.
A seat which has been re the vehicle. Each seat must must be securely engaged. a bench seat is not properly hazard for all vehicle occupa
Make sure that the seat removed from the vehicle.
All adjustment to the se carried out only when the ve
29) Optional equipment
Seats and stowage132
ont passenger seats 180 to use the Alhambra
fast room. Or you can easily remove the seats
travel with a lot of luggage.
in the luggage or passenger compartment can g manoeuvre. Please ensure that these items
st of a seat in the second row when folding a forwards. Serious injuries can occur if a back- gaged in position.
alhambra_ingles_0708 Seite 132 Mittwoch, 10. September 2008 10:55 10
Some seat settings for the Alhambra
Examples of how the seating layout can be altered.
Of course, the illustrations show only some of the many seat combinations
possible in the Alhambra. You can, for example, purchase corresponding
retainers for your bicycle from SEAT Service. That means you will be able to
protect your bicycles from both theft and the weather when transporting
them.
Or you turn30) the driver and fr
as a conference room or break
in the third row30) in order to
WARNING
Luggage and other items be thrown forward in a brakin are secured properly.
Do not release the backre seat in the third row of seats rest has not been properly en
Fig. 96 Alhambra loaded with luggage.
Fig. 97 Alhambra trans- formed into conference room
30) Optional equipment
Seats and stowage 133
Safety Fir Technical Data
mpartment cover closed while the vehicle is in injury during a sudden braking manoeuvre or
trument panel
nt, press on the part closest to the air vents
of the arrow, this opens by spring action
and until it is completely closed.
Fig. 99 Central stowage on instrument panel
alhambra_ingles_0708 Seite 133 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Stowage compartments
Stowage compartment on the front passenger side
The compartment can be opened by pulling the lever fig. 98. It is locked
when the key slot* is horizontal.
Vehicle wallet compartment
The vehicle wallet should always be kept in the glove compartment.
Cooling the stowage compartment on the front passenger side
There is an air outlet on the right of the rear panel fig. 98. If the air condi-
tioning is switched on, cooled air can be fed into the compartment. Turn the
air vent to open and close it.
WARNING
Always keep the stowage co motion to reduce the risk of in the event of an accident.
Central stowage on ins
To open stowage compartme
(dotted area) in the direction
fig. 99.
To close, lower the cover by h
Fig. 98 Passenger side: stowage compartment
Seats and stowage134
on centre console*
ay include a stowage compartment between
Fig. 101 Stowage compartment on centre console
alhambra_ingles_0708 Seite 134 Mittwoch, 10. September 2008 10:55 10
Upper right stowage on instrument panel
To open, press as shown by arrow fig. 100. The stowage compartment
opens by spring action.
To close, lower the cover by hand until it is completely closed.
Stowage compartment
Some versions of the model m
the radio and the Climatronic.
Fig. 100 Upper right stowage on instrument panel
Seats and stowage 135
Safety Fir Technical Data
be found in the front passenger door fig. 104
03 in vehicles with a curtain airbag31).
Fig. 103 Stowage area in the roof
Fig. 104 Stowage are in the driver door
alhambra_ingles_0708 Seite 135 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Stowage compartment in the luggage compartment
On the right there is a stowage compartment which can be used to store the
hazard warning triangles for example.
To open, pull cover in the direction of the arrow fig. 102.
To close, push cover in the direction of the arrow fig. 102.
Other stowage areas
Further stowage facilities can
as well as in the roof fig. 1
Fig. 102 Stowage compartment in the luggage compartment
A1
A2
Seats and stowage136
ere are two cup holders
e cup holder briefly. The spring mecha-
lder.
in the direction of the arrow fig. 105
ers can cause injury.
cup holders should be used only for standard a maximum capacity of 0.5 litres.
Fig. 105 Cupholder in the centre console
alhambra_ingles_0708 Seite 136 Mittwoch, 10. September 2008 10:55 10
Coat hooks are located in the roof. They are integrated in the grab handles in
the passenger compartment.
Location of CD changer31)
The CD changer, which can be factory fitted, is located either in the dash
panel or in the right-hand stowage compartment in the luggage compart-
ment.
WARNING
Ensure that no objects can fall from the dash panel or other stowage areas into the driver footwell while the vehicle is moving. In the event of a sudden braking manoeuvre, you will not be able to use the brake, clutch or accelerator. Risk of accident.
Clothing hung on the coat hooks must not restrict the driver's view. Risk of accident. The coat hooks are intended only for use with light arti- cles of clothing. Do not leave any hard, sharp or heavy objects in hanging articles of clothing. During sudden braking manoeuvres or accidents, espe- cially those involving airbag deployment, these objects could injure the vehicle occupants.
Cup holders
In the centre console: th
Opening cup holder
Press the symbol on th
nism will release the ho
Closing the cup holder
Push the cup holder up
until it engages.
WARNING
Improper use of the cup hold
For reasons of safety, the drinks cans and bottles with
31) Optional equipment
Seats and stowage 137
Safety Fir Technical Data
to the rear of the front seat backrests.
ble
direction of the arrow fig. 106 until it
the opposite direction of the arrow
ages.
Fig. 106 Folding table on right-hand front seat
alhambra_ingles_0708 Seite 137 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Never place hot drinks in the drink holders. During normal or sudden driving manoeuvres, sudden braking or an accident, the hot drink could be spilled. Danger of scalding.
Ensure, when driving, that no can or other object is dropped in the driver footwell, as it could get under the pedals and obstruct their working. In the event of a sudden driving or braking manoeuvre, you will not be able to operate the brake, clutch or accelerator pedal. Risk of accident!
Never leave closed drinks cans in direct sunlight for any length of time. If the inside temperature is high they could explode.
Caution When driving, do not leave open cans in the cup holders. The drink might be
spilt on braking, for example, and could damage the vehicle.
Note There is no left-hand cup holder on vehicles fitted with a hands-free tele-
phone system32).
Folding table
Folding tables are fitted
Folding out the folding ta
Fold the table up in the
engages.
Folding the table back
Push the table down in
fig. 106 until it eng
32) Optional equipment
WARNING (continued)
Seats and stowage138
attached to the head restraint of a seat used raint does not engage completely and will cident.
ed on a head restraint when no-one is seated nt of an accident, it could cause injury.
nly be secured on the driver and front
e seats in the passenger compartment. The
maged when folding the seats backwards and
ts
Fig. 108 Net bag on seats in second row
alhambra_ingles_0708 Seite 138 Mittwoch, 10. September 2008 10:55 10
WARNING
The folding tables may not be folded down whilst the vehicle is in motion and anyone is seated on the second row of seats. There is a risk on injury during a sudden braking manoeuvre! The table must therefore be closed and properly secured whilst the vehicle is in motion.
Clothes hangers
Removing the clothes hanger
Remove the head restraint page 123.
Pull the clothes hanger33) off the rods of the head restraint
fig. 107.
WARNING
The hanger must never be by children, as the head rest come off in the event of an ac
A hanger may only be fitt in the seat behind. In the eve
Caution The clothes hangers should o
passenger seats and not on th
side trim will otherwise be da
forwards.
Net bag for small objec
33) Optional equipment
Fig. 107 Clothes hangers on the front seat
Seats and stowage 139
Safety Fir Technical Data
ashtray
tray cover fig. 109 forwards (arrow),
er down as far as it will go.
insert, pull it to the front until it engages.
ehicle have a stowage compartment in place of
shtray. Hot ash could ignite the paper in the
alhambra_ingles_0708 Seite 139 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
The seats in the second row are fitted with a net bag page 138, fig. 108 for
the stowage of small objects.
The bag will hold a newspaper, can or standard bottle of up to a maximum of
0.5 litres .
WARNING
Ensure, when driving, that no can or other object is dropped in the driver footwell, as it could get under the pedals and obstruct their working. In the event of a sudden driving or braking manoeuvre, you will not be able to operate the brake, clutch or accelerator pedal. Risk of accident!
Ashtrays, cigarette lighter and electrical sockets
Front ashtray
Opening and closing the
To open move the ash
until it engages.
To close, push the cov
Emptying the ashtray
To remove the ashtray
Take out the ashtray.
No-smoking versions of the v
the ashtray.
WARNING
Never put paper in the a ashtray.
Fig. 109 Front ashtray
Seats and stowage140
ge 139, fig. 109.
fig. 111 inwards .
op out slightly.
hter and light the cigarette on the
hicle are fitted with a 12 volt socket in place of
tte lighter can lead to serious injuries or start
Fig. 111 Cigarette lighter in the ashtray
alhambra_ingles_0708 Seite 140 Mittwoch, 10. September 2008 10:55 10
Rear ashtrays
Emptying the rear door ashtrays
Open the ashtray and remove the interior of the ashtray.
WARNING
Never put paper in the ashtray. Hot ash could ignite the paper in the ashtray.
Cigarette lighter
Open the ashtray pa
Press the lighter button
Wait for the lighter to p
Pull out the cigarette lig
glowing coil.
No-smoking versions of the ve
the lighter page 141.
WARNING
Improper use of the cigare a fire.
Fig. 110 Rear ashtray
Seats and stowage 141
Safety Fir Technical Data
age area or the 12 Volt socket of the cigarette
ther electrical consumers with a power rating of
t34)
onnected to the 12-volt socket in the luggage
appliances connected to each socket must not
Watt.
lectricity from the additional battery on vehicles
battery34)
ny appliances connected to them are also func- ched off and the key removed. Improper use of essories can lead to serious injuries or cause a ry, never leave children unsupervised in the
s with the engine switched off will drain the
l accessories, see the instructions on
alhambra_ingles_0708 Seite 141 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Take care when using the cigarette lighter. Carelessness or negligence when using the cigarette lighter can cause burns, risk of injury.
The cigarette lighter also works when the ignition is off and when the ignition key is removed. To avoid the risk of fire, never leave children unsu- pervised in the vehicle.
Sockets
Electrical equipment can be connected to any of the 12 volt
sockets.
Socket in the centre console
The 12 Volt socket in the stow
lighter34) can be used for fur
up to 120 Watt.
Socket, luggage compartmen
Electrical equipment can be c
compartment fig. 112 The
exceed a power rating of 120
The socket is supplied with e
equipped with an additional
WARNING
The electrical sockets and a tional with the ignition swit the sockets or electrical acc fire. To avoid the risk of inju vehicle.
Note Using electrical appliance
battery.
Before using any electrica
page 202.
WARNING (continued)
Fig. 112 Socket, luggage compartment
34) Optional equipment
Seats and stowage142
ipment does not change to the last selected
reproduction of the external audio source. The
ion system remain in the AUX menu. Another
manually.
d a 3.5 jack connector. If the external audio
e of connector, an adapter should be used.
ached inside the vehicle could hinder the ies in the event of sharp braking or accident.
must not be placed on the instrument panel re can throw the device towards the compart- assengers.
must not be assembled in any case near the system. A sharp manoeuvre can throw the
ent and injure the vehicle passengers.
must not be held in hand or on the legs while an throw the device towards the compartment gers.
source cables so that they are not in the way
connected to the vehicle with the 12-volt power
ile playing with some adapters.
alhambra_ingles_0708 Seite 142 Mittwoch, 10. September 2008 10:55 10
AUX-IN Input
General notes
The AUX-IN socket is found on the centre console, next to the
gearbox lever.
The external audio sources connected to the AUX-IN socket will only be played
through the radio loudspeakers or the radio and navigation system. The
external audio sources can not be operated through the radio or the radio and
navigation system.
For operating the external audio source, consult the instructions manual of
the manufacturer in question.
If you wish, you can select whenever you want another audio source at the
radio or the radio and navigation system. While the external audio source is
not switched off, it will be playing as background.
Take into account that the equ
audio source on finishing the
radio or the radio and navigat
radio source must be selected
For the AUX-IN socket you nee
source does not have this typ
WARNING
The objects which are not att driver and cause severe injur
The external audio source in any case. A sharp manoeuv ment and injure the vehicle p
The external audio source airbag. See chapter Airbag device towards the compartm
The external audio source driving. A sharp manoeuvre c and injure the vehicle passen
Place the external audio while driving.
Note If the external audio source is
point, jamming may occur wh
Fig. 113 AUX-IN socket location
Seats and stowage 143
Safety Fir Technical Data
ment
mpartment
ose objects must be safely secured in
ent.
ing points to ensure the vehicle handles
e seats to increase the load area.
venly as possible in the luggage compart-
bjects directly on the floor of the vehicle.
be positioned above or in front of the rear
ully if you are transporting heavy objects
ecure heavy objects to the fitted fastening
r the end of the vehicle, you must draw the
users to this. Observe legal requirements
e open, please observe the instructions on
alhambra_ingles_0708 Seite 143 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Hazard warning triangles and first aid kit
Warning triangle
The hazard warning triangle may be fitted in the bracket behind the right trim
of the luggage compartment.
Note The warning triangle is not part of the vehicle's standard equipment.
First-aid kit
In the bracket located behind the right hand trim in the luggage compartment
there is space for a standard first aid kit and the hazard warning triangle.
For reasons of space, in vehicles fitted with a removable tow bar35) the
bracket only holds a smaller first aid kit and the hazard warning triangle.
Note In some vehicles the first aid kit bracket is behind the left hand trim in the
luggage compartment.
The first aid kit is not issued as a standard feature with the vehicle.
The first aid kit must comply with legal requirements.
Observe the expiry date of the contents of the first aid kit. You should
purchase a new first-aid kit as soon as possible after the shelf-life date of the
first-aid kit has expired.
Before buying accessories and replacement parts, refer to the note
Accessories, modifications and renewal of parts.
Luggage compart
Loading the luggage co
All luggage and other lo
the luggage compartm
Please observe the follow
well at all times:
If necessary, remove th
Distribute the load as e
ment.
Place and stow heavy o
If possible they should
axle.
Drive particularly caref
page 145.
Use suitable straps to s
rings page 144.
If objects protrude ove
attention of other road
when doing so.
When driving with the tailgat
page 99.
35) Optional equipment
Seats and stowage144
reas by placing heavy objects on the vehicle
ment in the rear window and the window aerial
be damaged if objects on the luggage
st them.
ats from the passenger compartment, you
overing over the floor anchorings to prevent
le helps reduce fogging of the windows. Used
n slits in the side trim of the luggage compart-
ion slits are never covered.
d to the fastening rings are commercially
s in the luggage compartment which
ggage and other objects.
damaged belts for fastening the luggage
e anchorage rings in Loading the
on page 143.
le seat belts for the third row of seats and the
can be used as fastening rings for items of
alhambra_ingles_0708 Seite 144 Mittwoch, 10. September 2008 10:55 10
WARNING
Loose luggage and other objects in the luggage compartment can cause serious injuries.
Always stow objects in the luggage compartment and secure them on the fastening rings.
Use suitable specialist straps to secure heavy objects.
During sudden manoeuvres or accidents, loose objects can be thrown forward, injuring vehicle occupants or passers-by. This increased risk of injury will be further increased if a loose object is struck by an inflating airbag. If this happens, objects can be transformed into missiles. Risk of fatal injury.
Remember that transporting heavy objects modifies the driving condi- tions as the centre of gravity has been altered. There is a risk of accident. Therefore, it is essential to adjust your speed and driving style accordingly, to avoid accidents.
Never exceed the allowed axle loads or allowed maximum weight. If the allowed axle load or the allowed total weight is exceeded, the driving char- acteristics of the vehicle may change, leading to accidents, injuries and damage to the vehicle.
Never leave the vehicle unattended, especially when the tailgate is open. Children could climb into the luggage compartment closing the door behind them; they will remain trapped without help and there is a mortal risk.
Never allow children to play in or around the vehicle. Close and lock both the tailgate and all the doors when you leave the vehicle. Before you lock the vehicle, make sure that there are no adults or children in the vehicle.
Never transport passengers in the luggage compartment. Every passenger must be properly belted in.
Caution Avoid overloading small a
floor.
The wires of the heating ele
in the rear side windows could
compartment cover rub again
If you have removed the se
should place a large, robust c
damage.
Note Air circulation in the vehic
air escapes through ventilatio
ment. Ensure that the ventilat
Straps for securing the loa
available.
Fastening rings
There are fastening ring
can be used to secure lu
Always use suitable un
or any other object tot h
luggage compartment
The retainers for the detachab
floor anchorings for the seats
luggage.
Seats and stowage 145
Safety Fir Technical Data
icle place a sturdy mat or similar cover
hicle.
ot cover protruding parts of the vehicle
r points from damage.
ll areas - spread the load.
secure the objects to retaining rings.
ully and think ahead.
en braking and driving manoeuvres.
ld read and observe all information on loading
eats from the passenger compartment, you
covering over the seat rails to prevent damage.
reas - spread the load.
g the vehicle
jects in the luggage compartment can cause
alhambra_ingles_0708 Seite 145 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
During a collision or an accident, even small and light objects can build up so
much energy that they can cause very severe injuries. The amount of kinetic
energy depends on the speed of the vehicle and the weight of the object.
The most significant factor, however, is the speed of the vehicle.
Example: An object weighing 4.5 kg is lying unsecured in the vehicle. During
a frontal collision at a speed of 50 km/h, this object generates a force corre-
sponding to 20 times its weight. That means that the effective weight of the
object increases to about 90 kg. You can imagine the severity of the injuries
which might be sustained if this projectile strikes an occupant as it flies
through the passenger compartment. This increased risk of injury will be
further increased if a loose object is struck by an inflating airbag.
WARNING
If pieces of baggage or other objects are secured to the fastening rings with inappropriate or damaged retaining cords, injuries could result in the event of braking manoeuvres or accidents.
To prevent pieces of luggage or other objects from flying forward, always use appropriate retaining cords which are secured to the fastening rings.
Never secure a child seat on the fastening rings.
Loading heavy objects
Special care is required when loading heavy objects and
when driving a vehicle which contains heavy objects.
Observe the following points to prevent damage and accidents:
If necessary, remove the seats to increase the load area.
Before loading the veh
flush on floor of the ve
Where necessary, do n
floor.
Protect the seat ancho
Avoid overloading sma
Use suitable straps to
Drive particularly caref
If possible, avoid sudd
WARNING
For safety reasons, you shou the vehicle page 145.
Caution If you have removed the s
should place a large, robust
Avoid overloading small a
Safety notes on loadin
WARNING
Loose luggage and other ob serious injuries.
Seats and stowage146
cover
nt cover protects your luggage from
Fig. 114 Luggage compartment cover:: holders on the right
Fig. 115 Luggage compartment cover:: holders on the right
alhambra_ingles_0708 Seite 146 Mittwoch, 10. September 2008 10:55 10
Always stow objects safely in the vehicle and secure them on the fastening rings if necessary.
Use suitable specialist straps to secure heavy objects.
Loose objects in the vehicle can move suddenly. As the centre of gravity moves, safety is impaired and the vehicle becomes difficult to handle.
During sudden manoeuvres or accidents, loose objects can be thrown forward, injuring vehicle occupants or passers-by. This increased risk of injury will be further increased if a loose object is struck by an inflating airbag. If this happens, objects can be transformed into missiles. Risk of fatal injury.
Remember that transporting heavy objects modifies the driving condi- tions as the centre of gravity has been altered. There is a risk of accident. Therefore, it is essential to adjust your speed and driving style accordingly, to avoid accidents.
Never exceed the allowed axle loads or allowed maximum weight. If the allowed axle load or the allowed total weight is exceeded, the driving char- acteristics of the vehicle may change, leading to accidents, injuries and damage to the vehicle.
Never leave the vehicle unattended, especially when the tailgate is open. Children could climb into the interior of the vehicle closing the door behind them; they will remain trapped without help and there is a mortal risk.
Never allow children to play in or around the vehicle. Close and lock all windows, the tailgate and all doors when you leave the vehicle.
Never transport passengers in the luggage compartment. Every passenger must be properly belted in.
Luggage compartment
The luggage compartme
prying eyes.
WARNING (continued)
Seats and stowage 147
Safety Fir Technical Data
ent in the rear window and the window aerial in
be damaged if objects on the luggage compart-
.
unhook the six hooks fig. 116 (arrows).
ow of seats is used to store light items of
n prevent items of luggage from being thrown
dden braking manoeuvres or in accidents.
Fig. 116 Net partition fitted in the vehicle
alhambra_ingles_0708 Seite 147 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Opening the luggage compartment cover
After fitting the luggage compartment cover, pull the handle on
the cover back and hook in the cover on the side.
Removing the luggage compartment cover
Press the unlock button (with the luggage compartment cover
rolled up) page 146, fig. 114 in the direction of the arrow
and remove the cover from the right holder upwards.
Remove the cover from the left holder in the direction of the arrow
and remove from the vehicle.
Fitting the luggage compartment cover
Push the luggage compartment cover to the stop in the direction
of the arrow page 146, fig. 115 into the left-hand holder.
Press the cover down into the right-hand holder until it engages
in position.
Light items of clothing or other objects on the luggage compartment cover
can restrict visibility through the rear window.
WARNING
Never leave hard, heavy or sharp objects on the shelf (unrolled) or in the pockets of clothing on the luggage compartment cover. Animals must never be allowed onto the luggage compartment cover. During a sudden braking or driving manoeuvre or an accident, these objects and animals endanger all vehicle occupants.Risk of injury.
Caution The wires of the heating elem
the rear side windows could
ment cover rub against them
Net bag*
To remove the net bag
The net bag behind the last r
luggage. The net partition ca
forward into the vehicle in su
A1
A2
A3
Seats and stowage148
g36), the basic supports can be fitted on the
distance between the supports to the objects
a sliding/tilting roof36), however, the front
he rear edge of the sliding/tilting roof when the
be removed?
save fuel, reduce wind noise and avoid theft).
matic car wash.
approved by SEAT or fail to fit them according e roof carrier itself may fall off the vehicle roof ccident or injury.
increased by transporting heavy or bulky ts the car's handling by shifting the centre of
ptibility to cross winds. Both circumstances Therefore you must adapt your driving style onditions - avoid sudden braking or driving load on the roof carrier.
ust always be installed exactly according to
ns and fastenings for the roof carrier system
tighten bolted connections and check the
intervals, e.g. at each stop during a long trip.
is changed by the installation of the roof carrier
ar this in mind when driving through garage
ere is danger of damage to the vehicle.
alhambra_ingles_0708 Seite 148 Mittwoch, 10. September 2008 10:55 10
WARNING
Always fit the net partition carefully, observing the instructions. Risk of injury.
Heavy, pointed or sharp items which are not stowed securely can cause injury in the event of sudden braking manoeuvres or accidents, even if the net bag is correctly assembled.
For reasons of safety, vehicle occupants must not travel behind a fitted safety net.
Roof carrier
Safety notes on using the roof carrier
The roof carrier system must always be installed exactly
according to the instructions provided.
Your vehicle has special roof rails on the right and left for fitting the
mounts. Therefore, standard roof carriers cannot be used.
The mounts are the basis of a complete roof carrier system. Special
fixtures must then be added in order to safely transport luggage, bicycles,
skis, surf boards or boats on the roof. All these system components are avail-
able from SEAT Service. We recommend you use genuine SEAT roof carrier
systems. If you wish to use a different roof carrier, make sure that it can be
fitted securely to your vehicle and that it cannot damage your vehicle.
We recommend that you keep the assembly instructions provided by the
roof carrier manufacturer in your vehicle wallet.
Only the fitted retainers may be used to secure the carrier feet on vehicles
without a roof railing. These retainers are located underneath the plastic rain
channel between the markings.
In vehicles with roof edgin edge making sure to adapt the
to be carried. On vehicles with
carrier may not be fitted near t
roof is open.
When should the roof carrier
When it is not needed (to
Before cleaning in an auto
WARNING
If you do not use mounts to instructions, the load or th and onto the street. Risk of a
The risk of an accident is loads on the roof, which affec gravity and increasing susce increase the risk of accident. and speed to the prevailing c manoeuvres when there is a
The roof carrier system m the instructions provided.
Caution Check all bolted connectio
before every trip. If necessary,
system at regular, appropriate
The height of your vehicle
and the load secured on it. Be
doors or low underpasses th
36) Optional equipment
Seats and stowage 149
Safety Fir Technical Data
. Therefore you must adapt your driving style conditions - avoid sudden braking or driving load on the roof carrier.
et the tailgate or rear window strike the roof load
f damage to the vehicle.
nvironment n the roof for convenience even if it is not being
resistance means that the vehicle uses more
ld always take off the roof carrier when it is not
ing box*
box may only be installed in the posi-
he third row.
y of the 12 Volt sockets in the vehicle. It
watts and has a capacity of approximately 32
he cooling and heating box is used for a long
itched off.
alhambra_ingles_0708 Seite 149 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Damage to the vehicle caused by incorrect installation of mounts or roof
carrier systems not approved by the factory are excluded from the vehicle
warranty.
Securing the load
Loads transported on the roof carrier must be securely
attached. The car's handling is affected when transporting
loads.
The maximum permissible roof load for your vehicle is 75 kg. The load limit
applies to the combined weight of the carrier system and the load itself.
Distribute the load evenly. However, if you are using a roof carrier with a lower
weight rating, you will not be able to carry the maximum roof load. Do not
exceed the maximum weight limit for the roof carrier which is listed in the
fitting instructions.
WARNING
If damaged, fine or inadequate securing straps are used to fasten objects carried on the roof, they could break in the event of sharp braking. This could cause an accident and serious injury.
Always use appropriate securing straps to secure objects on the roof carrier against sliding or flying off.,This could cause an accident. The load must be correctly secured.
Always respect the maximum authorised weight for the roof, the maximum authorised weight on the axles and the total maximum author- ised weight of the vehicle. Otherwise there is danger of causing an acci- dent.
The risk of an accident is increased by transporting heavy or bulky loads on the roof, which affects the car's handling by shifting the centre of gravity and increasing susceptibility to cross winds. Both circumstances
increase the risk of accident and speed to the prevailing manoeuvres when there is a
Caution Please take extra care not to l
when open there is a risk o
For the sake of the e The roof carrier is often left o
used. However, increased air
fuel. For this reason you shou
in use.
Cooling and heat
Notes on usage
The cooling and heating
tion of rear left seat in t
Power can be supplied by an
consumes approximately 33
litres.
The battery will discharge if t
period while the engine is sw
WARNING (continued)
Seats and stowage150
or the installation and use of the cooling and
manufacturer and should be kept with the
ing and heating box can be cooled or
unction
the cooling and heating box so that the
g is pointing to the notch.
ble plug into one of the vehicle's 12 volt
ing and heating box closed.
Fig. 117 Cooling and heating box as installed
alhambra_ingles_0708 Seite 150 Mittwoch, 10. September 2008 10:55 10
Before using the cooling and heating box for the first time, you should clean
it using a household detergent.
Disconnect the power supply and clean the box if you do not plan to use the
cooling and heating box for a long period. Place a folded towel between the
box and its lid. This prevents mould and damp stains forming in the cooling
and heating box.
Whenever possible, food and drinks should be stored in air-tight containers
in the box.
Do not overfill the box - this would prevent air circulation within the box.
Place crumpled paper (or similar) between bottles and other containers in the
box to prevent clanking noises.
Do not fill the interior of the box with liquid or ice.
Caution Do not place objects, blankets, or clothes on top of the cooling/heating
box, as the air intake and output may be obstructed and the box will discon-
nect itself.
Do not place any containers, food items or other objects into the box if
they are warmer than +50 C. This could damage the cooling and heating box.
The cold/hot box is not suitable for transporting corrosive material or
material containing solvents.
Never leave the cold/hot box in the rain or damp.
Note The cooling and heating box is not designed to heat or cool the interior of
the vehicle. The cooling and heating box should be used only for cooling and
warming food and drinks and for transporting heat-sensitive items on short
journeys.
A corresponding manual f
heating box is included by the
vehicle wallet.
Cooling or heating
The contents of the cool
kept warm.
Switching on the cooling f
Insert the cable plug in
blue marking on the plu
Insert the connector ca
sockets.
Keep the lid of the cool
Seats and stowage 151
Safety Fir Technical Data
the cooling and heating box
e cooling and heating box lid must always be e vehicle is in motion. The cooling and heating ecured in the correct floor anchorings.
vehicle is too low, the temperature in the box nd the contents may freeze. Bottles and other of injury.
cooling and heating box lid must not be used vehicle is in motion.
e cooling and heating box before the vehicle , it could drop down when the vehicle moves
alhambra_ingles_0708 Seite 151 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Switching on the heating function
Insert the cable plug in the cooling and heating box so that the
red marking on the plug is pointing to the notch.
Insert the connector cable plug into one of the vehicle's 12 volt
sockets.
Keep the lid of the cooling and heating box closed.
Switching the cooling and heating box off fully
Disconnect the power supply to the 12 Volt socket.
The internal temperature of the cooling and heating box is dependent on the
temperature in the vehicle. In cooling mode, the internal temperature can be
max. 20 degrees below the temperature in the vehicle. In heating mode it can
be max. 35 degrees above the temperature in the vehicle in Safety
notes on using the cooling and heating box on page 151.
If you switch directly from cooling to heating (or vice versa) it will take a rela-
tively long time for the interior to reach the desired temperature.
Faults
If the cooling and heating box does not work, proceed as follows:
Check whether there is power and whether the plug is securely in the
socket.
Make sure the power cable is not damaged.
Check the fuse for the power supply to the 12 Volt socket.
Run the engine to recharge the battery.
If these steps do not help, contact a qualified dealership.
Safety notes on using
WARNING
For reasons of safety, th closed and latched when th box must always be firmly s
If the temperature in the may fall below +2 degrees a containers could burst. Risk
For reasons of safety, the as a table or shelf when the
Always close the lid of th moves off. If the flap is open off. Risk of injury.
Heating, Ventilation and Air conditioning152
tion for the windscreen. The air recirculation
hed off and the windscreen heating 37) is
n in from outside the vehicle is directed at the
ing for the front
) or
. 118 Instrument panel: Climatronic controls
alhambra_ingles_0708 Seite 152 Mittwoch, 10. September 2008 10:55 10
Heating, Ventilation and Air conditioning
Climatronic
Controls
The Climatronic maintains the selected vehicle temperature automatically.
The cooling system only works when the engine is running and the
blower is switched on.
To switch a function on or off, press the appropriate button
fig. 118.
The temperature and the blower can be controlled individually at the front or
rear of the vehicle.
Button defrost func
and ECON mode are switc
switched on. The air draw
windscreen.
Display of the blower sett
Display:
AUTO (automatic mode
Fig
37) Optional equipment
A1
A2
A3
Heating, Ventilation and Air conditioning 153
Safety Fir Technical Data
must be clear of ice, snow, and condensation. ood visibility. Please familiarise yourself with heating and ventilation system, including the r the windows.
otes page 158.
emperature, flow, and distribution are
so that a specified temperature is
ossible and then maintained.
ode
.
perature We recommend 22C (72F).
e is quickly reached when a temperature of
tic mode. It can be changed as necessary to suit
ticular circumstances. It is possible to select
8C (64F) to +29C (86F). These are approxi-
ctual temperature may be slightly higher or
ide conditions.
(17.78C) is selected, the display switches to
ntrolled and in AUTO mode, the system runs at
alhambra_ingles_0708 Seite 153 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
ECON (cooling system off) or
OFF (entire system off)
Outside temperature display
Display for windscreen defrosting lights up when the windscreen
defrosting function is switched on
Display for air recirculation mode
Display for air flow
Display of the selected interior temperature front
Display of the blower setting rear
Display of the selected interior temperature rear
Button for the automatic mode
Button for air recirculation mode
Button for reducing the blower speed front
Button for raising the blower speed front
Button for directing the air flow to the chest
Button for directing the air flow to the footwell
Button for reducing the temperature front
Button for raising the temperature front
Button for reducing the blower speed rear
Button for raising the blower speed rear
Button for reducing the temperature rear
Button for raising the temperature rear
Button for switching the cooling system off
Switching between Celsius and Fahrenheit
Press and hold the button and press the button.
The selected temperature unit is then displayed.
WARNING
For road safety all windows This is essential to ensure g the correct operation of the demist/defrost functions fo
Note Please observe the general n
Automatic mode
In automatic mode air t
automatically regulated
attained as quickly as p
Switching on automatic m
Press the button
Select the desired tem
A comfortable interior climat
+22C (72F) is set in automa
individual preferences or par
interior temperatures from +1
mate temperatures and the a
lower depending on the outs
If a temperature below +18C
LO The temperature is not co
maximum cooling output.
A4
A5
A6
A7
A8
A9
A10
A11 AUTO
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23 ECON
ECON AUTO
AUTO
Heating, Ventilation and Air conditioning154
ff whenever an adjustment is made using the
blower. The temperature continues to be regu-
st one outlet in the instrument panel must be
ld otherwise ice over.
lay.
. 119 Instrument panel: Climatronic controls
alhambra_ingles_0708 Seite 154 Mittwoch, 10. September 2008 10:55 10
If a temperature above +29C (86F) is selected, the display switches to HI In
this setting the system runs at maximum heating output and the temperature
is not controlled.
Climatronic maintains a constant temperature level fully automatically. This is
done by automatically adjusting the temperature of the air supplied to the
interior, the blower setting, and the air distribution. The system also allows
for the effect of strong sunlight, so there is no need for manual adjustment.
Therefore, automatic mode provides the best comfort for the vehicle occu-
pants in virtually all conditions throughout the year.
Automatic mode is switched o
buttons for air distribution or
lated.
Note In the automatic mode, at lea
open. The cooling system cou
Manual mode
In manual mode you can adjust the air temperature, flow, and distribution yourself.
Switching on manual mode
Press one of the air distribution buttons fig. 119 or
several times, or one of the temperature buttons or .
is deleted from the disp
Fig
A15 A16
A17 A18 AUTO
Heating, Ventilation and Air conditioning 155
Safety Fir Technical Data
pen a window to ensure an adequate supply of rwise, when the Climatronic is switched off, no Stale or contaminated air inside the vehicle easing the risk of accident.
prevents fumes or unpleasant smells
le.
ge 154, fig. 119 to switch air recircula-
is is ON if the symbol is displayed
ts strong odours in the ambient air from
or example when passing through a tunnel or in
re is low, using air recirculation mode provides
ting air from the vehicle interior instead of cold
re is high, using air recirculation mode provides
ling air from the vehicle interior instead of warm
A12
A6
alhambra_ingles_0708 Seite 155 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Temperature
The selected temperature setting is shown on the display. It is possible to
select interior temperatures from +18C (64F) to +29C (86F). These are
approximate temperatures and the actual temperature may be slightly higher
or lower depending on the outside conditions.
If a temperature below +18C (17.78C) is selected, the display switches to
LO The temperature is not controlled and in AUTO mode, the system runs at
maximum cooling output.
If a temperature above +29C (86F) is selected, the display switches to HI In
this setting the system runs at maximum heating output and the temperature
is not controlled.
Blower
The blower can be adjusted gradually using the controls y . Always
have the blower running at a low setting to ensure a constant flow of fresh air
into the vehicle. If the blower is set to 0, the Climatronic is switched off.
Air distribution
The air distribution is adjusted using the buttons and . It is also
possible to open and close some of the air outlets separately.
Switching off the cooling system
Pressing the button switches off the air cooling system to save fuel.
The temperature continues to be controlled, but the air cannot be cooled. The
set temperature can then only be reached if it is higher than the outside
temperature.
Switching the Climatronic on/off
Press button until OFF is shown on display . The Climatronic is switched
off. This function should be used in certain situations only (e.g. if the system
develops a fault).
The Climatronic is switched back on by pressing button .
WARNING
When the Climatronic is off o fresh air in the vehicle. Othe fresh air enters the vehicle. may cause drowsiness, incr
Air recirculation mode
Air recirculation mode
from entering the vehic
Press the button pa
tion mode on or off. Th
on the screen.
Air recirculation mode preven
entering the vehicle interior, f
queuing traffic.
When the outside temperatu
more effective heating by hea
air from outside.
When the outside temperatu
more effective cooling by coo
air from outside.
ECON
A13 A3
AUTO
Heating, Ventilation and Air conditioning156
for the passenger compartment
used to lower or raise the blower speed
volume.
rks only in air recirculation mode. Fresh air is
. 120 Instrument panel: Climatronic controls
alhambra_ingles_0708 Seite 156 Mittwoch, 10. September 2008 10:55 10
WARNING
Do not leave the air recirculation function on for long periods. In air recircu- lation mode, no fresh air enters the vehicle interior. Also, if the cooling system is switched off, the windows can quickly mist over. Stale or contam- inated air inside the vehicle may cause drowsiness, increasing the risk of accident.
Climatronic for the passenger compartment
Setting the blower speed for the passenger compartment
The temperature is selected with buttons fig. 120 and .
It remains stored until another temperature is selected.
Setting the blower speed
Buttons and are
and thus adjust the air
The Climatronic for the rear wo
not drawn into the vehicle.
Fig
A21 A22 A19 A20
Heating, Ventilation and Air conditioning 157
Safety Fir Technical Data
nger compartment
ssenger compartment
the passenger compartment heating system are
left side panel at the rear.
Fig. 121 Air outlets for heating the passenger compartment
Fig. 122 Cold air vents in the roof
alhambra_ingles_0708 Seite 157 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
The Climatronic can be fitted either with or without an additional cooling
system 38) for the passenger compartment.
Climatronic for the passenger compartment without additional cooling system
The temperature setting for the rear can be max. 3C higher than the temper-
ature in the passenger compartment. A lower temperature can not be set.
If the Climatronic detects that the passenger compartment has to be heated,
it activates the additional heat exchanger. The air outlets on the floor guide
warm air into the vehicle page 157.
If the Climatronic detects that the passenger compartment has to be cooled,
cooled air is fed into the vehicle via the air outlets in the front of the vehicle
only page 157.
Climatronic for the passenger compartment with additional cooling system
The temperature setting for the rear can be max. 3 C lower than the temper-
ature in the passenger compartment.
If the Climatronic detects that the passenger compartment has to be heated,
it activates the additional heat exchanger. The air outlets on the floor guide
warm air into the vehicle page 157.
If the Climatronic detects that the passenger compartment has to be cooled,
cooled air is fed into the rear of the vehicle via the open air outlets in the roof
page 157.
Air outlets in the passe
Air outlets for heating the pa
The air outlets fig. 121 for
located at the bottom of the 38) Optional equipment
Heating, Ventilation and Air conditioning158
barrier against impurities in the ambient air (
to work with maximum efficiency, the pollen
intervals specified in the Service Schedule.
maturely due to use in areas with very high
en filter must be changed more frequently than
.
tronic40) is not switched on for a long period,
n cause unpleasant smells. To prevent these
ould be run at the highest blower setting at
eratures are over +5C. Briefly open a window
air conditioning
mbols in the Climatronic flash for approx. 15
switched on. Contact a specialist workshop.
cannot be switched on this may be caused by
.
s lower than +5C.
ssor has been temporarily switched off
mperature is too high.
s faulty.
alhambra_ingles_0708 Seite 158 Mittwoch, 10. September 2008 10:55 10
Air vents in the roof
In vehicles with a second cooling system39) for ventilating the passenger
compartment, an air outlet is fitted in the roof above each rear seat
fig. 122.
The air outlets in the roof can be opened and closed individually and
adjusted by moving the grid.
Each air outlet has two thumb wheels. The left thumb wheel can be used to
open and close the air outlet. The right thumb wheel can be used to direct the
air towards the head and chest.
WARNING
Never leave objects, food or medicines in front of the air outlets in the rear seats. The hot air could damage or destroy heat-sensitive objects, food or medicines.
Caution Do not use the area in front of the outlets to store objects. This could cause
the blower to overheat and switch off. The blower could also be damaged.
Note In the cooling mode, at least one air outlet in the roof must be open. The
cooling system could otherwise ice over.
General notes
The pollution filter
The pollution filter serves as a
e.g.dust and pollen).
For the air conditioning system
filter must be replaced at the
If the filter loses efficiency pre
levels of air pollution, the poll
stated in the Service Schedule
Instructions for use
If the air conditioning or Clima
deposits on the evaporator ca
odours, the cooling system sh
least once a month when temp
at the same time.
Faults in the operation of the
There is a fault if the all the sy
seconds when the ignition is
If the air conditioning system
the following reasons:
the engine is not running.
The blower is switched off
The outside temperature i
the cooling system compre
because the engine coolant te
The air conditioning fuse i
39) Optional equipment 40) Optional equipment
Heating, Ventilation and Air conditioning 159
Safety Fir Technical Data
circulation mode is on, as smoke drawn into the
ue on the evaporator, producing a permanent
alhambra_ingles_0708 Seite 159 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Another fault in the vehicle. Have the air conditioning checked by a qual-
ified workshop.
WARNING
Please note that when the Climatronic is switched off, no fresh air will enter the vehicle interior. For this reason you should ensure that sufficient fresh air is able to enter the vehicle by opening a window or the sliding/tilting sunroof40) when the Climatronic is switched off.
Caution If you suspect that the air conditioning is damaged, switch off the air
conditioning with button to prevent further damage and have it
checked by a qualified workshop.
Repairs to the air conditioning system require specialist knowledge and
special tools. Therefore, we recommend that you take the vehicle to a quali-
fied workshop should problems occur.
Note If the humidity and temperature outside the vehicle are high, condensa- tion can drip off the evaporator in the cooling system and form a pool under-
neath the vehicle, this is completely normal and there is no need to suspect
a leak.
Keep the air intake slots in front of the windscreen free of snow, ice and
leaves to ensure heating and cooling is not impaired, and to prevent the
windows misting over.
The air conditioning system operates most effectively with the windows
and the sliding /tilting roof 40) closed. However, if the sun has heated up the
vehicle, the air inside can be cooled more quickly by opening the windows for
a short period.
Do not smoke while air re
cooling system leaves a resid
unpleasant odour.
ECON
Driving160
the correct position.
e steering column fig. 123 down
el in this way until the correct position is
again firmly .
ing column adjustment function and an incor- ult in serious injury.
eering column should be adjusted only when k of accident.
Fig. 124 Proper sitting position for driver
alhambra_ingles_0708 Seite 160 Mittwoch, 10. September 2008 10:55 10
Driving
Address
Adjusting the steering wheel position
The height and reach of the steering wheel can be freely
adjusted to suit the driver.
Adjust the driver seat to
Push the lever under th
.
Adjust the steering whe
set fig. 124.
Then push the lever up
WARNING
Incorrect use of the steer rect seating position can res
To avoid accidents, the st the vehicle is stationary. Ris
Fig. 123 Adjusting the steering wheel position
Driving 161
Safety Fir Technical Data
programme (ESP)
safer in certain situations.
rogramme (ESP) contains the electronic differ-
tion control system (TCS). The ESP works
brake system (ABS). Both warning lamps will
tems are faulty.
ally when the engine is started.
ere you require less traction, you can switch off
fig. 125 .
hains,
w or on loose surfaces,
Fig. 125 Detailed view of dash panel ESP button
alhambra_ingles_0708 Seite 161 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Adjust the driver seat or steering wheel so that there is a distance of at least 25 cm between the steering wheel and your breast bone page 160, fig. 124. If you fail to observe the minimum distance, the airbag will not protect you. Risk of fatal injury.
If your physical constitution prevents you from maintaining the minimum distance of 25 cm, contact an Authorised Service Centre. The Authorised Service Centre will help you decide if special specific modifica- tions are necessary.
If you adjust the steering wheel so that it points towards your face, the driver airbag will not protect you properly in the event of an accident. Make sure that the steering wheel points towards your chest.
When driving, always hold the steering wheel with both hands on the outside of the ring at the 9 o'clock and 3 o'clock positions. Never hold the steering wheel at the 12 o'clock position, or in any other manner (e.g. in the centre of the steering wheel, or on the inside of the rim). In such cases, you could receive severe injuries to the arms, hands and head.
Safety
Electronic stabilisation
ESP helps make driving
The Electronic Stabilisation P
ential lock (EDL) and the trac
together with the anti-locking
light up if the ESP or ABS sys
The ESP is started automatic
In specific circumstances wh
the ESP by pressing button
For example:
when driving with snow c
when driving in deep sno
WARNING (continued)
Driving162
key
lock
ignition is switched off, and the steering wheel
lock, take out the key and turn the wheel
engage. You should always lock the steering
hicle. This makes vehicle theft more difficult
low plug system
sition and let go of the key. If the key cannot be
m position to position , move the
d off the steering lock mechanism) until the key
Fig. 126 Ignition key positions
A1
A2
A1 A2
alhambra_ingles_0708 Seite 162 Mittwoch, 10. September 2008 10:55 10
when rocking the vehicle backwards and forwards to free it from mud, for
example.
You should press the button to switch the ESP back on when you no longer
need wheel spin.
The TCS and EDL are also switched off if the ESP is switched off. This means
that this technology is not available for as long as the ESP remains switched
off.
When does the inscription OFF light up on the button?
It will light up continuously if there is a malfunction in the ESP.
It will light up continuously if the ESP is switched off.
WARNING
The electronic stabilisation programme (ESP) cannot defy the laws of physics. This should be kept in mind, particularly on slippery and wet roads and when towing a trailer.
Always adapt your driving style to suit the condition of the roads and the traffic situation. Do not let the extra safety afforded by ESP tempt you into taking any risks when driving, this can cause accidents.
Please refer to the corresponding warning notes on ESP.
Ignition lock
Position of the ignition
Ignition switched off, steering
In position fig. 126 the
lock can be engaged.
To engage the steering wheel slightly until you hear the pin
wheel when you leave your ve
.
Switching on the ignition or g
Turn the ignition key to this po
turned or is difficult to turn fro
steering wheel (to take the loa
turns freely.
ESP
A1
Driving 163
Safety Fir Technical Data
ition key
y be taken out of the ignition lock if the
tion P.
n, you can remove the ignition key only if the
tor lever page 168 is in position P. The
r the ignition key has been removed.
ts unauthorised persons from driving
hat deactivates the electronic immobiliser auto-
erted into the ignition.
automatically activated when you take the key
d using a genuine SEAT key with the correct
ed properly if you do not have a genuine SEAT
alhambra_ingles_0708 Seite 163 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Starting
The engine is started when the key is in this position. Electrical components
with a high power consumption are switched off temporarily.
Each time that the vehicle must be started, the ignition key must be turned to
the position . The repetitive start prevention lock of the ignition prevents
possible damage to the starter motor if the engine is already running.
WARNING
Wait for the vehicle to come to a standstill before removing the ignition key from the lock. The steering lock could be activated immediately - Risk of accident!
Always remove the key from the ignition lock when leaving the vehicle, even if you only intend to be gone for a short period. This is especially important if you must leave children or disabled people in the vehicle, they could accidentally start the engine or work electrical equipment such as the windows possibly resulting in an accident.
Unsupervised use of the keys could result in the engine being started or electrical systems, such as the electric windows, being used. This can result in serious injury.
Caution The starter must not be used unless the vehicle is at a standstill (key position
). If the starter is used as soon as the engine is switched off, the starter or
the engine could be damaged.
Safety interlock for ign
The ignition key can onl
selector lever is in posi
After switching off the ignitio
automatic gearbox gear selec
selector lever is blocked afte
Electronic immobiliser
The immobiliser preven
the vehicle.
Inside the key there is a chip t
matically when the key is ins
The electronic immobiliser is
out of the ignition lock.
The engine can only be starte
code.
Note The vehicle cannot be operat
key.
A3
A1
A3
Driving164
ccidents. Carbon monoxide can cause people also cause death.
nattended if the engine is running.
ays, they could explode or cause the engine jury.
ou should avoid high engine speeds, driving at
he engine. Risk of engine damage.
pushed or towed for more than approximately
Fuel could enter the catalytic converter and
-start or tow a vehicle to start it, you should first
of another vehicle. Observe the warnings in the
vironment running it with the car stationary. You should
he engine. This helps the engine reach oper-
educes emissions.
tarted using a genuine SEAT key with
l (if it is an automatic gearbox, place the
alhambra_ingles_0708 Seite 164 Mittwoch, 10. September 2008 10:55 10
Starting and stopping the engine
Starting a petrol engine
The engine can only be started using a genuine SEAT key with
the correct code.
Place the gear in neutral (if it is an automatic gearbox, place the
gear lever in P or in N).
In vehicles with a manual gearbox, depress the clutch pedal fully
and hold it in this position, the starter will then only have to turn
the engine.
Turn the ignition key to position page 162, fig. 126 to start
the engine.
Let go of the ignition key as soon as the engine starts; the starter
motor must not be allowed to run on with the engine.
You may need to press the accelerator briefly after starting a very hot engine.
When starting from cold, the engine may be a little noisy for the first few
seconds until oil pressure has built up in the hydraulic valve lifters. This is
quite normal, and no cause for concern.
If the engine does not start immediately, switch off the starter after about
10 seconds and try again after about half a minute. If the engine still does not
start, the fuel pump fuse should be checked.
WARNING
Never start or run the engine in unventilated or closed rooms. The exhaust fumes contain carbon monoxide, an odourless and colourless
poisonous gas. Risk of fatal a to lose consciousness. It can
Never leave the vehicle u
Never use cold start spr to run at high revs. Risk of in
Caution When the engine is cold, y
full throttle and over-loading t
The vehicle should not be
50 metres to start the engine.
damage it.
Before attempting to push
try to start it using the battery
chapter Help with Ignition.
For the sake of the en Do not warm up the engine by
drive off as soon as you start t
ating temperature faster and r
Starting a diesel engine
The engine can only be s
the correct code.
Place the gear in neutra
gear lever in P or in N).
A3
WARNING (continued)
Driving 165
Safety Fir Technical Data
accidents. Carbon monoxide can cause people n also cause death.
nattended if the engine is running.
rays, they could explode or cause the engine njury.
ou should avoid high engine speeds, driving at
the engine. Risk of engine damage.
pushed or towed for more than approximately
. Fuel could enter the catalytic converter and
-start or tow a vehicle to start it, you should first
of another vehicle. Observe the warnings in the
nvironment y running it with the car stationary. You should
the engine. This helps the engine reach oper-
reduces emissions.
e
position page 162, fig. 126 .A1
alhambra_ingles_0708 Seite 165 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
In vehicles with a manual gearbox, depress the clutch pedal fully
and hold it in this position, the starter will then only have to turn
the engine.
Turn the ignition key to position page 162, fig. 126 . The
warning lamp lights up to show that the glow plugs are
preheating the engine.
When the warning lamp goes out, turn the key to position to
start the engine. Do not press the accelerator.
Let go of the ignition key as soon as the engine starts, the starter
motor must not be allowed to run on with the engine.
When starting from cold, the engine may be a little noisy for the first few
seconds until oil pressure has built up in the hydraulic valve lifters. This is
quite normal, and no cause for concern.
If you have problems starting the engine, please refer to Help with Ignition.
Glow plug system
To avoid unnecessary loads on the battery, do not use any other major elec-
trical equipment while the glow plugs are preheating.
Start the engine as soon as the glow plug warning lamp goes out.
Starting a diesel engine after the fuel tank has been completely run dry
If the fuel tank has been completely run dry, it may take longer than normal
(up to one minute) to start a diesel engine after refuelling. This is because air
needs to be bled from the fuel system while starting.
WARNING
Never start or run the engine in unventilated or closed rooms. The exhaust fumes contain carbon monoxide, an odourless and colourless
poisonous gas. Risk of fatal to lose consciousness. It ca
Never leave the vehicle u
Never use cold start sp to run at high revs. Risk of i
Caution When the engine is cold, y
full throttle and over-loading
The vehicle should not be
50 metres to start the engine
damage it.
Before attempting to push
try to start it using the battery
chapter Help with Ignition.
For the sake of the e Do not warm up the engine b
drive off as soon as you start
ating temperature faster and
Switching off the engin
Stopping the engine.
Turn the ignition key to
A2
A3
WARNING (continued)
Driving166
tationary with the engine idling. Press the
. 127 in the middle (neutral).
n and then to the left and forwards into
own on the gearstick.
ngaged when the vehicle is stationary. When
engaging this gear wait about 6 seconds with
rder to protect the gearbox.
and the ignition is switched on the following
Fig. 127 Manual gearbox with shift diagram
alhambra_ingles_0708 Seite 166 Mittwoch, 10. September 2008 10:55 10
After the engine is switched off the radiator fan may run on for up to 10
minutes, even if the ignition is switched off. The radiator fan can start auto-
matically if the hot engine causes the coolant temperature to rise, or if the sun
heats the engine compartment.
WARNING
Never switch off the engine until the vehicle is stationary.
The brake servo and the power assisted steering work only when the engine is running. You need more strength to steer and brake the vehicle when the engine is switched off. As you cannot steer and brake in the normal manner, there is a greater risk of accidents and serious injury.
The steering lock can engage immediately when the key is removed from the ignition lock. The vehicle cannot be steered. Risk of accident.
Caution If the engine has been driven hard for a long period, the engine could over-
heat when it is switched off. Risk of engine damage. For this reason, you
should idle the engine for approx. 2 minutes before you switch it off.
Manual gearbox
Manual gearbox
Selecting the reverse gear
The vehicle should be s
clutch right down.
Put the gearlever fig
Press the gearstick dow
the reverse position sh
The reverse gear can only be e
the engine is running, before
the clutch pressed in fully in o
When reverse gear is engaged
takes place:
Driving 167
Safety Fir Technical Data
x
has two gearbox programmes.
stem is equipped with two driving programmes.
e driving situation, either a consumption
re sporty programme will be selected.
l be carried out automatically depending on how
d programme will be selected if you use the
y. This means that the gearbox will shift up
rogramme which shifts up gear later will be
rator more quickly.
Fig. 128 Centre console: selector lever of the auto- matic gearbox with locking button
alhambra_ingles_0708 Seite 167 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
The reversing lights come on.
The heating or air conditioning automatically change to air recirculation
mode.
The rear window heater switches on when the windscreen wiper is acti-
vated.
WARNING
When the engine is running, the vehicle will start to move as soon as a gear is engaged and the clutch released.
Never select the reverse gear when the vehicle is in motion. Risk of acci- dent.
Caution Do not rest your hand on the gear lever when driving. The pressure of your
hand could cause premature wear on the selector forks in the gearbox.
When changing gear, you should always depress the clutch fully to avoid
unnecessary wear and damage.
Do not hold the car on the clutch on hills. This causes premature wear
and damages the clutch. It can also prevent power being transferred from the
engine to the gearbox.
Automatic gearbo
Gearbox programmes
The automatic gearbox
The gearbox management sy
Depending on the driver or th
oriented programme or a mo
The programme selection wil
the accelerator is used.
The consumption-oriente
accelerator slowly or normall
earlier and down later.
A more sporty driving p
selected if you use the accele
Driving168
tomatic gearbox
e forward gears up and down auto-
e selector lever in position P or N. Further
4.
e pedal.
button (button on the knob of the
167, fig. 128, select gear position (R, D or
and wait for the gearbox to engage the
t can be felt).
press the accelerator .
event the car creeping forwards, e.g. at
or lever does not need to be put into the
.
rator.
e pedal until the vehicle comes to a
rmly.
alhambra_ingles_0708 Seite 168 Mittwoch, 10. September 2008 10:55 10
Note A programme will, depending on the driving resistance, be selected automat-
ically that guarantees more pulling power, thus avoiding having to shift gear
constantly.
Selector lever lock
The selector lever lock in position P or N prevents gears from
being engaged inadvertently, which would cause the vehicle
to move.
The selector lever lock is released as follows:
Switch on the ignition.
Press and hold the brake pedal and press the selector lever lock
on the left of the selector lever at the same time page 167,
fig. 128.
The selector lever lock only works if the vehicle is stationary or driving at
speeds up to 5 km/h (approx. 3 mph). At higher speeds the selector lever
lock is disengaged automatically in the N position.
The selector lever lock is not engaged if the selector lever is moved quickly
through position N (e.g. when shifting from R to D). This makes it possible, for
instance, to rock the vehicle backwards and forwards if it is stuck in snow
or mud. The selector lever lock engages automatically if the brake pedal is not
depressed and the lever is in position N for more than about 1 second.
Driving a car with an au
The gearbox changes th
matically.
Switching on
Start the engine with th
information page 16
Driving
Press and hold the brak
Press and hold the lock
selector lever) page
S).
Release the lock button
gear (a slight movemen
Release the brake and
Stopping briefly
Use the foot brake to pr
traffic lights. The select
positions P or N for this
Do not press the accele
Parking the vehicle
Press and hold the brak
standstill .
Apply the handbrake fi
Driving 169
Safety Fir Technical Data
ever leave your vehicle if the engine is running have to leave your vehicle while the engine is parking brake and engage parking lock P.
nd if D, S or R is engaged, you will need to hold e car will creep forward as the power transmis- even when the engine is idling.
tor when you move the selector lever. Risk of
lever to R or P when driving. Risk of accident!
steep gradient, reduce your speed and use ear.
hicle on a gradient, always hold the vehicle in e to stop it from rolling back.
rub and do not use the brake pedal too often t braking will cause the brakes to overheat and brake effect. This increases the braking e brake system to fail.
l down a gradient with the gear in neutral N, or even if the engine is not running.
a gradient, do not attempt to stop it from rolling
r when a gear has been selected. Otherwise, the
ift gearbox* may overheat causing damage. Pull
ress the brake pedal to prevent the vehicle from
with the selector lever in position N with the
matic gearbox / direct shift gearbox* will be
ricated.
alhambra_ingles_0708 Seite 169 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Press and hold the lock button, move the selector lever to P and
release the lock button.
Driving up and down hills
Press the selector lever from position D to the right into the
Tiptronic selector gate.
Lightly press the selector lever back to change down.
Holding the car on a hill
You should always hold the vehicle in position with the footbrake
to stop it from rolling backwards . Do not try to prevent
the vehicle from rolling backwards by increasing the engine
speed while a range of gears is selected.
Moving away on an incline
With a gear engaged, take your foot from the brake and depress
the accelerator.
The steeper the gradient, the lower the gear you will need. This increases the
braking effect of the engine. For example, you should drive down a very steep
slope in 3rd gear. If the engine brake effect is not sufficient, the vehicle will
gain speed. The automatic gearbox / direct shift gearbox automatically
changes up to prevent the engine over revving. Use the foot brake to reduce
speed and change into 3rd gear using Tiptronic .
Your vehicle has an automatic interlock which prevents the selector lever
being put into a position for driving forwards or in reverse from positions P or
N if the brake pedal is not depressed.
The ignition key cannot be removed unless the selector lever is in position P.
WARNING
As a driver you should n and a gear is engaged. If you running, you must apply the
If the engine is running a the car on the foot brake. Th sion is not fully interrupted
Never press the accelera accident.
Never move the selector
Before you drive down a Tiptronic to select a low g
If you have to stop the ve position using the foot brak
Never allow the brake to or for long periods. Constan will considerably reduce the distance and could cause th
Never allow the car to rol in selector lever position D,
Caution If you stop the vehicle on
by depressing the accelerato
automatic gearbox /direct sh
the handbrake on fully or dep
rolling away.
If you allow the car to roll
engine switched off, the auto
damaged as it will not be lub
Driving170
on the side of the selector lever and on the
bi-instrument.
his position, the drive wheels are locked
ged only when the vehicle is stationary .
position P, the locking button in the selector
and the brake pedal depressed at the same
ched on.
be pressed to select the selector lever position
the selector lever cannot be removed from the
this position.
d only when the vehicle is stationary and the
osition R, press in the lock button and at the
dal, with the ignition switched on.
tion R and the ignition switched on the
on
ning automatically change to air recirculation
itches on when the windscreen wiper is acti-
alhambra_ingles_0708 Seite 170 Mittwoch, 10. September 2008 10:55 10
Note The two clutch system of the direct shift gearbox* has a system to protect
against excess strain, which may occur, for example, when the vehicle is held
on a hill with the clutch and the gearbox oil overheats. When the clutch is
overloaded, the vehicle begins to jerk and the position indicator of the
selector lever begins to flash. To avoid breakdowns, the clutch breaks the
power transmission between the engine and the gearbox, as a result of which
the vehicle loses impetus. If the clutch opens automatically due to over-
loading, depress the brake pedal and wait a few seconds before
continuing.
Selector lever positions
The selector lever positions and gears are shown on the
display in the combi-instrument.
Selector lever positions
The gear selected is displayed
display fig. 129 in the com
P - parking lock
When the selector lever is in t
mechanically.
The parking lock must be enga
To move the selector lever from
lever handle must be pressed
time when the ignition is swit
Only the locking button has to
P.
If the battery has discharged,
P position.
R - reverse gear
The reverse gear is engaged in
Reverse gear must be engage
engine is idling .
To move the selector lever to p
same time press the brake pe
With the selector lever in posi
following occurs:
The reversing lights come
The heating or air conditio
mode.
The rear window heater sw
vated.
Fig. 129 Instrument panel: display showing position of selector lever
Driving 171
Safety Fir Technical Data
tally to N when driving, take your foot off the
e speed drop to idling before selecting D
alhambra_ingles_0708 Seite 171 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
N - neutral (idling)
If this position is selected, the gearbox is in neutral. Power is not transmitted
to the wheels and the engine does not have a braking function.
Never use the N position to drive down a hill. The engine does not function as
a brake and the brakes are subjected to excessive stain.
You could damage the automatic gearbox if you drive down hills with the
selector lever in position N and the engine switched off.
D - Drive (forwards)
In this position the gearbox automatically changes automatically to a longer
or shorter gear, according to the driving style and speed. The braking effect
of the engine when driving downhill is very limited when the selector is in this
position. The display also shows which gear has been selected in addition to
position D.
If position N has been selected and you wish to select D, you must press the
foot brake if the vehicle is stationary, or travelling at under 5 km/h (approx.
3 mph) .
WARNING
Never move the selector lever to R or P when driving. Risk of accident!
Never drive the vehicle with the engine and the ignition switched off. You could loose control of the vehicle. The brake servo only functions when the engine is running as does the elector-mechanical steering system. You need more strength to steer and brake the vehicle when the engine and the ignition are switched off. As you cannot steer and brake in the normal manner, there is a greater risk of accidents and serious injury.
Caution If you allow the car to roll with the selector lever in position N with the engine
switched off, the automatic gearbox will be damaged as it will not be lubri-
cated.
Note If the lever is moved acciden
accelerator and let the engin
again.
Driving172
onic (selector lever)
from position D to the right into the
e fig. 130.
or to the front + to change up.
or lever back - to change down.
atic gearbox automatically shifts up to the next
um permitted engine speed is reached.
automatic gearbox does not change down until
engine could no longer over rev.
tronic
ifted manually or using Tiptronic, the indi-
display fig. 131.
designed to give maximum acceler-
ht down, the gearbox automatically changes
eed and engine speed, to give the vehicle full
to the next gear until the engine reaches the
speed for the gear.
vehicle if you accelerate quickly on slippery erious injury.
alhambra_ingles_0708 Seite 172 Mittwoch, 10. September 2008 10:55 10
Changing gear with Tiptronic
The Tiptronic system allows the driver to change gears
manually.
Changing gear with Tiptr
Press the selector lever
Tiptronic selector gat
Lightly press the select
Lightly press the select
When accelerating, the autom
gear shortly before the maxim
If a lower gear is selected, the
the point is reached where the
Gear selection display for Tip
If the automatic gearbox is sh
vidual gears are shown on the
Kick-down function
The kick-down feature is
ation.
If you press the accelerator rig
down a gear, depending on sp
acceleration.
The gearbox does not shift up
maximum determined engine
WARNING
You could lose control of the surfaces. This may result in s
Fig. 130 Centre console: gearbox selector lever with locking button
Fig. 131 Instrument panel: display showing position of selector lever
Driving 173
Safety Fir Technical Data
lights up when the handbrake is applied
. The warning lamp goes out when the hand-
to slow down the vehicle when it is in motion. iderably longer, as braking is only applied to dent!
dbrake slightly applied. This could cause the lose their braking efficiency. Risk of accident. wear on the rear brake pads/linings.
before you leave the vehicle. On cars with a
ear, or on an automatic move the selector lever
always be firmly applied when the
points when parking the vehicle:
top the vehicle.
irmly.
engage 1st gear. On an automatic move
alhambra_ingles_0708 Seite 173 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Be particularly careful, therefore, when using the kick-down function on slippery road surfaces.
You should use the kick-down function only when traffic and weather conditions allow it to be used safely.
Handbrake
Using the handbrake
The handbrake should be applied firmly to prevent the
vehicle from accidentally rolling away.
Always apply the handbrake when you leave your vehicle and when
you park.
Using the handbrake
Firmly pull the handbrake lever up all the way.
Releasing the handbrake
Firmly pull the handbrake lever up all the way.
Push in the lock button on the handbrake lever.
Keep the locking knob pressed and push the lever all the way
down .
The handbrake is located at the side of the driver seat. Always apply the
handbrake firmly. This prevents you driving with the handbrake applied
.
The handbrake warning lamp
and the ignition switched on
brake is released.
WARNING
Never use the handbrake The braking distance is cons the rear wheels. Risk of acci
Never drive with the han rear brakes to overheat and This also causes premature
Caution Always apply the handbrake
manual gearbox engage 1st g
to P.
Parking
The handbrake should
vehicle is parked.
Always note the following
Use the foot brake to s
Apply the handbrake f
On a manual gearbox
the selector lever to P.
WARNING (continued)
Driving174
arning system*
rning system is a parking aid which
obstacles in front or behind the
system assists the driver when parking. If the
ing an obstacle, an intermittent sound signal is
nce, the shorter the intervals between tones. If
obstacle, the sound signal becomes constant.
the front is indicated via a high tone and via a
er the distance, the shorter the intervals
is too close to the obstacle, the sound signal
e detected if the vehicle gets even closer to it!
hen
m the obstacle
a constant distance for approximately 3
d off once the vehicle has reached the perma-
sors: from approx 80 cm
approx 120 cm
approx 160 cm
alhambra_ingles_0708 Seite 174 Mittwoch, 10. September 2008 10:55 10
Switch off the engine and remove the key from the ignition lock.
Turn the steering wheel slightly to engage the steering lock.
Always take you car keys with you when you leave the vehicle
.
Additional notes on parking the vehicle on gradients:
Turn the steering wheel so that the vehicle would roll against the kerb if it did
start to roll.
If the vehicle is facing downhill, turn the front wheels so that they point
towards the kerb.
If the vehicle is facing uphill, turn the front wheels so that they point away
from the kerb.
WARNING
Take measures to reduce the risk of injury when you leave your vehicle unattended.
Never park where the hot exhaust system could ignite inflammable materials, such as dry grass, low bushes, spilt fuel etc.
Never allow vehicle occupants to remain in the vehicle when it is locked. They would be unable to open the vehicle from the inside, and could become trapped in the vehicle in an emergency. In the event of an emergency, locked doors will delay assistance to occupants.
Never leave children unsupervised in the vehicle. They could set the vehicle in motion, for example, by releasing the handbrake or the gear lever / selector lever.
Depending on weather conditions, it may become extremely hot or cold inside the vehicle. This can be fatal.
Parking distance w
Description
The parking distance wa
draws your attention to
vehicle.
The parking distance warning
rear of the vehicle is approach
emitted. The shorter the dista
the vehicle is too close to the
The distance to an obstacle at
low tone at the rear. The short
between tones. If the vehicle
becomes constant.
The obstacle may no longer b
The warning signal will stop w
the vehicle moves away fro
the outer sensors measure
seconds.
The signal will not be switche
nent tone area.
Registering the obstacle
Exterior front and rear sen
Front central sensors: from
Rear central sensors: from
Driving 175
Safety Fir Technical Data
small children or animals when reversing. The able to detect them.
ys be able to detect objects such as trailer draw
etc. This could result in damage to your car.
ning system works only at speeds of under
ing sensors in the bumpers must be kept clean
g with pressure hoses and steam cleaners, the
nly briefly. A distance of 10 cm between the
e nozzle must be observed.
cated via a tone when activated for the first time
hing in the button. Switch the system off at the
y a qualified dealership as soon as possible.
ry-fitted towing attachment41), the parking
t active when the reverse gear is engaged if you
ning system registers water as an obstacle.
alhambra_ingles_0708 Seite 175 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Switching the parking distance warning system on and off
Switching on the parking distance warning system
The parking distance warning system is activated by either pressing the
button fig. 132 or by selecting the reverse gear. A warning lamp in the
button will indicate that the system is active.
Switching off the parking distance warning system
The parking distance warning system is switched off by pressing the button
(the warning lamp in the button goes out) or exceeding speeds of approx.
25 km/h.
WARNING
The parking distance warning system cannot replace the driver's assessment of the situation. The driver is personally responsible for safe parking and other manoeuvres.
The sensors have blind spots in which obstacles and people are not registered.
Be particularly aware of sensors may not always be
Caution The system may not alwa
bars, thin rails, fences, posts
The parking distance war
approx. 15 km/h.
The parking distance warn
and free of ice. When cleanin
sensors should be sprayed o
sensors and the steam / hos
Note A system fault will be indi
and by the warning lamp flas
button and have it checked b
If your vehicle has a facto
distance warning system is no are towing a trailer.
The parking distance war
Fig. 132 Detailed view of dash panel Control button for the parking distance warning system
41) Optional equipment
WARNING (continued)
Driving176
x: if the cruise control is activated the gearbox
ithout first releasing the clutch, as the the
d this may cause damage.
e CCS cannot maintain a constant speed. The
s own weight. Reduce gears (with an automatic
he Tiptronic) or brake using the footbrake.
alhambra_ingles_0708 Seite 176 Mittwoch, 10. September 2008 10:55 10
Cruise control system (CCS)
Cruise control operation
The cruise control system(CCS) is able to maintain the set
speed in the range from approx. 30 km/h to 180 km/h.
Once the desired speed has been reached and the setting stored, you may
take your foot off the accelerator.
In vehicles fitted with a manual gearbox and in vehicles with an automatic
gearbox with the lever in positions P, N or R the cruise control does not
operate in first gear.
WARNING
It could be dangerous to use the cruise control system (CCS) if it is not possible to drive at constant speed.
Do not use the cruise control in heavy traffic or on steep roads, with several bends or in slippery circumstances (snow, ice, rain or loose gravel), as there is a risk of accident.
Always adapt your speed and the distance to the vehicles ahead to take the traffic situation into consideration. This is the duty of the driver. The cruise control system is merely an aid to the driver.
Never use the cruise control system when driving off-road or on unpaved roads. This feature is designed for use on paved roads only. Risk of accident.
Always switch off the CCS when you have finished using it. This will prevent you using it by mistake.
It is dangerous to use a set speed which is too high for the prevailing road, traffic or weather conditions. This may cause an accident.
Caution Vehicles with a manual gearbo
should not be set in neutral w
engine speed will increase an
Note When travelling down hills, th
vehicle will accelerate under it
gearbox, reduce gears using t
Driving 177
Safety Fir Technical Data
. 133 to the left to ON. The symbol
instrument when the cruise control system
. 133 to the right to OFF or press the
once.
T of the rocker switch fig. 133 once
reached the speed you wish to set
peed is then stored and maintained.
ed
eed hold down the upper part of the
fig. 133 or button fig. 134 .
eed hold down the lower part of the rocker
3 or button fig. 134 . The
cle is no longer accelerating, not due to
g the accelerator, the previously programmed
he accelerator pedal is released. This will not be
cle speed is more than 10 km/h higher than the
5 minutes. The speed will have to be stored
AB
AA
AB
AB +
AB -
alhambra_ingles_0708 Seite 177 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Lever for cruise control
The CCS can be operated using the controls on the turn signal
lever or on the multi-function steering wheel.
Switching on the system
Move the control fig
lights up in the combi-
is switched on.
Switching off system
Move the control fig
key fig. 134
Setting speed
Press the lower part SE briefly when you have
fig. 134 . This s
Increasing the stored spe
To reach the desired sp
rocker button
Reducing the set speed
To reach the desired sp
button fig. 13
speed falls as the vehi
sharp braking.
If you increase speed by usin
speed will be resumed when t
the case, however, if the vehi
stored speed for longer than
again.
Fig. 133 Turn signal and main beam headlight lever control and rocker switch for cruise control
AA
AB
Fig. 134 Multifunction steering wheel: CCS controls
-
+
-
Driving178
, release the brake or clutch pedal, move the
utton page 177, fig. 133 or button
peed which is too high for the current road, . Risk of accident.
+
alhambra_ingles_0708 Seite 178 Mittwoch, 10. September 2008 10:55 10
Control of the set speed is switched off if you reduce speed by depressing the
brake pedal. You can reactivate the control by pressing once on the upper part
of the rocker switch or button .
WARNING
It is dangerous to use a set speed which is too high for the prevailing road, traffic or weather conditions. This may cause an accident.
Switching off system temporarily
Switching off the control temporarily in vehicles with a manual gearbox
Depress the brake or clutch pedal or
Push the switch page 177, fig. 133 to OFF, or
Press the lower part of the button .
Switching off the control temporarily in vehicles with an automatic gearbox
Press the brake pedal or
Select positions N or 1 or
Push the switch page 177, fig. 133 to OFF, or
Press the lower part of the rocker button .
The speed stored will remain in the memory if the control is switched off
temporarily, unless you select positions N or 1. In this case, the speed stored
in the memory will be deleted.
To resume the control function
switch to ON or press the b
page 177, fig. 134 once.
WARNING
It is dangerous to use a set s traffic or weather conditions
+
AA
CANCEL
AA
CANCEL
AA
Intelligent technology 179
Safety Fir Technical Data
or the corresponding message appears on diately have the brake pads checked and pecialised workshop.
es on, this may be caused by the
e warning light comes on on the instrument
over 6 km/h with the hand brake on, a text
rations may appear on the instrument panel. In
eard.
t brake fluid the warning lamp lights up on
ame time, a text message or the necessary oper-
trument panel. Stop the vehicle immediately
ke fluid page 221
he brake system the warning lamp lights up
three buzzes are emitted. At the same time, a
y operations may appear on the instrument
o not drive on. You should obtain professional
p can light up together with the anti-locking
.
alhambra_ingles_0708 Seite 179 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Tips and Maintenance
Intelligent technology
Brakes
Brake servo
The brake servo supplements the pressure you exert on the brake pedal. It
works only when the engine is running.
If the brake servo does not operate, for example, when the vehicle is being
towed or due to a fault in the system, the brake pedal must be depressed
harder.
WARNING
The braking distance can also be affected by external factors.
Never let the vehicle coast with the engine switched off. Failure to do so could result in an accident. The braking distance is increased considerably as the brake servo does not function.
If the brake servo is out of action, for example if the car is being towed, you will have to press the brake pedal considerably harder than normal.
Brake pads wear display
If this light comes on, check the brake pads immediately.
At the same time, a text message or the necessary operations may appear on
the instrument panel.
WARNING
If the warning lamp lights up the instrument panel, imme replaced, if necessary, at a s
Brake warning lamp
If the warning lamp com
following reasons:
With the handbrake on th
panel. If you are travelling at
message or the required ope
addition a warning signal is h
In the event of insufficien the instrument panel. At the s
ations may appear on the ins
and check the level of the bra
In the event of a fault in t on the instrument panel and
text message or the necessar
panel. Stop the vehicle and d
assistance. This warning lam
brake system warning lamp
Intelligent technology180
d of the vehicle to weather, road and traffic tra safety afforded by the system tempt you iving. Risk of accident.
her if you drive too fast, if you do not keep front, and when the road surface is slippery or risk cannot be reduced by the brake assist
annot defy the laws of motion. Slippery and n with the brake assist system!
cle or work carried out incorrectly (e.g. to the nning gear or any components affecting the t the efficiency of the ABS, EDL, ESP and TCS
em (ABS)
em prevents the wheels locking
S) is an important part of the car's active safety
too slowly in relation to the road speed, and is
ill reduce the pressure for this wheel. The driver
process by a pulsating of the brake pedal and
rate warning to the driver that one or more of
nd the ABS control function has intervened. In
keep the brake pedal fully depressed so the
plication. Do not pump the brake pedal.
alhambra_ingles_0708 Seite 180 Mittwoch, 10. September 2008 10:55 10
WARNING
Special care must be taken when working on the engine or on components in the engine compartment.
It is important that you read and observe the corresponding warnings before working in the engine compartment page 209.
If the brake warning symbol does not go out, or if it lights up when driving, the brake fluid level in the reservoir is too low or there is a fault in the brake system. Risk of accident. Stop the vehicle and do not drive on. You should obtain professional assistance.
If the brake warning lamp lights up together with the ABS warning lamp , the control function of the ABS could be out of action. This could cause the rear wheels to lock quickly when you brake. This could cause the rear to break away. Risk of skidding. Drive carefully to the nearest qualified workshop and have the fault corrected.
Brake assist system (BAS)
The brake servo (BAS) works only when the engine is running.
In an emergency, most drivers brake in time, but not with maximum force.
This results in unnecessarily long braking distances.
In these cases the brake assist servo comes into action: on activating the
brake pedal quickly, the assistant interprets this as an emergency. It then very
quickly builds up the full brake pressure so that the ABS can be activated
more quickly and efficiently, thus reducing the braking distance.
Do not reduce the pressure on the brake pedal. The brake assist system
switches off automatically as soon as you release the brake.
WARNING
Try to always adapt the spee conditions. Do not let the ex into taking any risks when dr
The risk of accident is hig your distance from the car in wet. The increased accident system.
The brake assist system c wet roads are dangerous eve
Modifications to the vehi engine, the brake system, ru wheels and tyres) could affec and lessen their efficiency.
Anti-locking brake syst
The anti-lock brake syst
during braking.
The anti-lock brake system (AB
system.
How the ABS works
If one of the wheels is turning
close to locking, the system w
is made aware of this control
audible noise. This is a delibe
the wheels is tending to lock a
this situation it is important to
ABS can regulate the brake ap
Intelligent technology 181
Safety Fir Technical Data
itors the ABS.
light up for a few seconds when the ignition is
after the system has run through an automatic
does not light up when the ignition is switched
ot go out again after a few seconds.
p when the vehicle is moving.
d in the normal way (except that the ABS control
ase take the vehicle to a qualified workshop as
e ESP warning lamp will also light up.42)
ights up together with the brake warning lamp
ult in the ABS function, but also a possible fault
age or the necessary operations may appear on
hen working on the engine or on components
ead and observe the corresponding warnings e compartment page 209.
alhambra_ingles_0708 Seite 181 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
On braking sharply on slippery ground, this system helps to keep the vehicle
under control, as the wheels do not lock.
However, ABS will not necessarily guarantee shorter braking distances in all
conditions. The braking distance could even be longer if you brake on gravel
or on fresh snow covering a slippery surface.
WARNING
Try to always adapt the speed of the vehicle to weather, road and traffic conditions. Do not let the extra safety afforded by the system tempt you into taking any risks when driving. Risk of accident.
The anti-lock brake system cannot defy the laws of motion. Slippery and wet roads are dangerous even with ABS! If you notice that the ABS has been activated, you should reduce speed immediately to suit the road and traffic conditions.
The ABS cannot reduce the risk of accident if, for example, you are driving with an unsuitable load or too close to the preceding vehicle.
WARNING
Modifications to the vehicle or work carried out incorrectly (e.g. to the engine, the brake system, running gear or any components affecting the wheels and tyres) could affect the efficiency of the ABS, EDL, ESP and TCS and lessen their efficiency.
The effectiveness of ABS is also determined by the tyres fitted page 225.
ABS warning lamp
The warning lamp mon
The warning lamp should
switched on. It goes out again
test sequence.
There is a fault in the ABS if:
The ABS warning lamp on.
The warning lamp does n
The warning lamp lights u
The vehicle can still be brake
function is out of action). Ple
soon as possible.
If a fault occurs in the ABS, th
Brake system fault
If the ABS warning lamp l
, this indicates not only a fa
in the brake system .
At the same time, a text mess
the instrument panel.
WARNING
Special care must be taken w in the engine compartment.
It is important that you r before working in the engin
42) Optional equipment
Intelligent technology182
utomatically when the brake has cooled down.
d of the vehicle to weather, road and traffic tra safety afforded by the system tempt you iving. Risk of accident.
lippery surface, for example on ice and snow, ly. Despite EDL, the driven wheels may other- impair the car's stability.
g style to suit road conditions and the traffic
or work carried out incorrectly (e.g. to the nning gear or any components affecting the t the efficiency of the ABS, EDL, ESP and TCS
programme (ESP)
ion programme helps to reduce the
ogramme (ESP) consists of ABS, EDL and TCS
ne is running.
eft switched on at all times. Only when the
tained should the ESP be disconnected.
ains,
alhambra_ingles_0708 Seite 182 Mittwoch, 10. September 2008 10:55 10
If the brake warning lamp should light up together with the ABS warning lamp , stop the vehicle immediately and check the brake fluid level in the reservoir page 221. If the fluid level has dropped below the MIN mark you must not drive on. Risk of accident. You should obtain professional assistance.
If the brake fluid level is correct, the fault in the brake system may have been caused by a failure of the ABS control function. This could cause the rear wheels to lock quickly when you brake. This could cause the tail of the vehicle to skid sideways. Drive carefully to the nearest qualified workshop and have the fault corrected.
Electronic differential lock (EDL)
The electronic differential lock helps prevent the loss of trac-
tion caused if one of the driven wheels starts spinning.
The electronic differential lock (EDL) only works when the engine is running.
EDL helps the vehicle to start moving, accelerate and climb a gradient in slip-
pery conditions where this may otherwise be difficult or even impossible.
It uses the ABS sensors to monitor the speed of the driven wheels.
At speeds of up to approximately 80 km/h, it is able to balance out differ-
ences in the speed of the driven wheels of approximately 100 rpm caused by
a slippery road surface on one side of the vehicle. It does this by braking the
wheel which has lost traction and distributing more driving force to the other
driven wheel via the differential.
To prevent the disc brake of the braked wheel from overheating, the EDL cuts
out automatically if subjected to excessive loads. The car remains operational
and will behave in the same way as a car without EDL. For this reason, the
driver is not informed that the EDL has been switched off.
The EDL will switch on again a
WARNING
Try to always adapt the spee conditions. Do not let the ex into taking any risks when dr
When accelerating on a s press the accelerator careful wise start to spin. This could
Always adapt your drivin situation.
WARNING
Modifications to the vehicle engine, the brake system, ru wheels and tyres) could affec and lessen their efficiency.
Electronic stabilisation
The electronic stabilisat
danger of skidding.
The electronic stabilisation pr
and only works when the engi
The ESP should generally be l
necessary drive can not be ob
For example:
when driving with snow ch
WARNING (continued)
Intelligent technology 183
Safety Fir Technical Data
start flashing to indicate that the ESP and TCS
e driving condition.
ously if there is a malfunction in the ESP.
ly if the ESP is switched off.
ult should occur in the ABS because the ESP
the ABS.
up and stays on after the engine is started, this
stem has temporarily switched off the function.
activated by switching the ignition off and then
goes out, this means the system is fully func-
, the warning lamp lights after turning the
off after a brief trip.
ed of the vehicle to weather, road and traffic tra safety afforded by the system tempt you riving. Risk of accident.
defy the laws of motion. This should be kept in ry and wet roads and when towing a trailer.
g style to suit the condition of the roads and
he risk of accident if, for example, you are ad or too close to the preceding vehicle.
icle or work carried out incorrectly (e.g. to the nning gear or any components affecting the ct the efficiency of the ABS, EDL, ESP and TCS
alhambra_ingles_0708 Seite 183 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
when driving in deep snow or on loose surfaces,
when rocking the vehicle backwards and forwards to free it from mud, for
example.
You should press the button to switch the ESP back on when you no longer
need wheel spin.
When the ESP is deactivated, the TCS is switched off at the same time. This
means that this technology is not available for as long as the ESP remains
switched off.
How ESP works
ESP reduces the danger of skidding by braking the wheels individually. The
system uses the steering wheel angle and road speed to calculate the
changes of direction desired by the driver, and constantly compares them
with the actual behaviour of the car. If the desired course is not being main-
tained accurately (for instance if the car is beginning to skid) the ESP compen-
sates automatically by applying the brake at the appropriate wheel.
The forces acting on the braked wheel bring the car back to a stable condi-
tion. If the car is tending to oversteer (break away at the rear) the brake appli-
cation is concentrated on the outside front wheel; if the car is understeering
(tending to follow a wider radius in a bend), the brake is mainly applied to the
inside rear wheel.
How the Traction Control System (TCS) works
TCS reduces engine power to help prevent the driven wheels of front-wheel
drive vehicles losing traction during acceleration. The system works in the
entire speed range in conjunction with ABS. If a malfunction should occur in
the ABS, the TCS will also be out of action. TCS helps the car to start moving,
accelerate and climb a gradient in slippery conditions where this may other-
wise be difficult or even impossible.
When does the warning lamp light up or flash ?
The warning lamp lights up when the ignition is switched on and
should go out again after a few seconds.
The warning lamp will
are counteracting an unstabl
It will light up continu
It will light up continuous
It will also come on if a fa
operates in conjunction with
If the warning lamp lights
may mean that the control sy
In this case the ESP can be re
on again. If the warning lamp
tional
If the battery is disconnected
ignition on. This should turn
WARNING
Try to always adapt the spe conditions. Do not let the ex into taking any risks when d
The ESP and TCS cannot mind, particularly on slippe
Always adapt your drivin the traffic situation.
The ESP cannot reduce t driving with an unsuitable lo
WARNING
Modifications to the veh engine, the brake system, ru wheels and tyres) could affe and lessen their efficiency.
Intelligent technology184
istributed automatically to both axles
ns and how you drive.
, your car will have plenty of traction in winter
dard tyres. Nevertheless, we still recommend
front or rear wheel drive, winter tyres or all-
on all four wheels when winter road conditions
this will give a better braking response.
re mandatory, they must be fitted to the front
l drive.
ve, all four tyres should have the same amount
have the same rolling circumference.
ippery or wet surfaces. You could lose control o fast. This may result in serious injury.
hat you adjust your speed to suit the road and the extra safety afforded by four-wheel drive ks when driving.
s the vehicle good acceleration even in winter. rive vehicle handles in the same way as a
eels may start to aquaplane and lose ar is driven too fast. If this should happen, se in engine speed to warn the driver, as with
alhambra_ingles_0708 Seite 184 Mittwoch, 10. September 2008 10:55 10
The effectiveness of the ESP is also determined by the tyres fitted page 225.
Caution In order to ensure that ESP and TCS function correctly, all four wheels must be
fitted with the same tyres. Any differences in the rolling radius of the tyres can
cause the system to reduce engine power when this is not desired.
Power steering
Power steering does not work if the engine is not running or if the power
steering system has developed a fault. In this case the steering wheel is very
hard to turn.
Caution Do not keep the steering wheel in the full-lock position for longer than
15 seconds when the engine is running. This could cause damage to the
power steering system.
Four-wheel drive*
In vehicles with four-wheel drive, the engine power is distrib-
uted to all four wheels
The four-wheel drive system is fully automatic and does not require interven-
tion by the driver. The engine power is permanently distributed to all four
wheels. The engine power is d
according to the road conditio
Winter tyres
Thanks to its four-wheel drive
conditions, even with the stan
that, in keeping with cars with
season tyres should be fitted
are expected, mainly because
Snow chains
On roads where snow chains a
wheels of cars with four-whee
Replacing tyres
In vehicles with four-wheel dri
of wear. All four wheels must
WARNING
Never drive too fast on icy, sl of your vehicle if you drive to
Therefore, it is essential t traffic conditions. Do not let tempt you into taking any ris
The four-wheel drive give When braking, a four-wheel d front drive vehicle.
On wet roads the front wh contact with the road if the c there will be no sudden increa a front-wheel drive car.
WARNING (continued)
Driving and the environment 185
Safety Fir Technical Data
rake pads
n-in carefully for the first 500 km. New
un-in carefully for the first 200 km.
can compensate for the reduced braking effect
the brake pedal. If you need to make an emer-
nce will be longer with new brake pads than with
run-in.
ximum grip to start with, and need running in. Drive particularly carefully in the first 500 km.
run in and do not have the correct friction 00 km. However, you can compensate for the ect by applying more pressure on the brake
ing distance
braking distance are influenced by
road conditions.
epends directly on the brake pad wear. The rate
ends to a great extent on the conditions under
and the way the vehicle is driven. If you often
ort distances or have a sporty driving style, we
e thickness of your brake pads checked by SEAT
recommended in the service schedule.
alhambra_ingles_0708 Seite 185 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Driving and the environment
Running-in
Running in a new engine
The engine needs to be run-in over the first 1,500 km.
Up to 1,000 kilometres
Do not drive at speeds of more than 2/3 the maximum speed.
Do not use full throttle.
Avoid high engine revolutions.
Do not tow a trailer.
From 1000 to 1500 km
Speeds can be gradually increased to the maximum road speed
or maximum permissible engine speed (rpm).
During its first few hours of running, the internal friction in the engine is
greater than later on when all the moving parts have bedded down.
For the sake of the environment If the engine is run in gently, the life of the engine will be increased and its oil
consumption reduced.
Running in tyres and b
New tyres should be ru
brake pads should be r
During the first 200 km, you
by applying more pressure to
gency stop, the braking dista
brake pads which have been
WARNING
New tyres do not give ma This may cause an accident.
New brake pads must be properties during the first 2 slightly reduced braking eff pedal.
Braking effect and brak
The braking effect and
driving situations and
The efficiency of the brakes d
of wear of the brake pads dep
which the vehicle is operated
drive in town traffic, drive sh
recommend that you have th
Service more frequently than
Driving and the environment186
sion control system
of the catalytic converter
etrol.
dry.
do not replenish with too much engine oil
up engine oil .
o start it, use jump leads if necessary
running or loss of power when the vehicle is
iately and have the vehicle inspected at the
hese symptoms are communicated by the
age 70. If this happens, unburnt fuel can enter
e into the environment. The catalytic converter
eating.
es very high temperatures! Fire hazard!
alytic converter could come into contact with terials under the vehicle.
nderseal or anti-corrosion coatings to the erter or the heat shields on the exhaust m the engine could ignite them.
alhambra_ingles_0708 Seite 186 Mittwoch, 10. September 2008 10:55 10
If you drive with wet brakes, for example, after crossing areas of water, in
heavy rainfall or even after washing the car, the effect of the brakes is less-
ened as the brake discs are wet or even frozen (in winter): in this case, dry
the brakes by applying the brakes carefully several times
WARNING
Longer braking distances and faults in the brake system increase the risk of accidents.
New brake pads must be run in and do not have the correct friction during the first 200 km. The slightly reduced braking effect can be compen- sated for by increasing pressure on the brake pedal. This also applies when new brake pads are fitted.
If brakes are wet or frozen, or if you are driving on roads which have been gritted with salt, braking power may set in later than normal.
When driving downhill, the brakes work hard and get hot very quickly. Before driving down a long steep gradient, it is advisable to reduce speed and change to a lower gear (or move the selector lever to a lower gear if your vehicle has automatic transmission). In this way you will make use of the engine braking effect and relieve the load on the brakes.
Never let the brakes rub by only applying light pressure. Continuous braking will cause the brakes to overheat and will increase the braking distance. Apply and then release the brakes alternately.
Never let the vehicle coast with the engine switched off. The braking distance is increased considerably as the brake servo does not work.
Very heavy use of the brakes may cause a vapour lock if the brake fluid is left in the system for too long. This impairs the braking effect.
Non-standard or damaged front spoilers could restrict the airflow to the brakes and cause them to overheat. Observe the notes page 202 before buying accessories.
If a brake circuit fails, the braking distance will be increased consider- ably. Contact a qualified workshop immediately and avoid unnecessary journeys.
Exhaust gas emis
Catalytic converter*
To conserve the useful life
Always use unleaded p
Do not run the fuel tank
For engine oil changes,
page 215, Topping
Never tow the vehicle t
page 249.
If you notice misfiring, uneven
moving, reduce speed immed
nearest qualified workshop. T
exhaust gas warning lamp p
the exhaust system and escap
can also be damaged by overh
WARNING
The catalytic converter reach
Never park where the cat dry grass or inflammable ma
Do not apply additional u exhaust pipes, catalytic conv system, because the heat fro
Driving and the environment 187
Safety Fir Technical Data
designed to refuel with mixtures of FAME fuel
el particulate filter is damaged when the mixture
nvironmentally friendly
nmentally friendly driving
ental pollution and wear to the engine, brakes
rt on your driving style. By adopting an econom-
ting the traffic situation ahead, you can easily
0-15%. Some tips on how to help you reduce
are listed below.
the traffic situation
accelerating. By anticipating the situation, you
n and, therefore accelerate less. If it is possible,
r engaged, for example, if you see a red light
ieved in this way helps to reduce the wear of
and fuel consumption are reduced to zero
).
ergy
l is to change up through the gears quickly.
pm in the lower gears uses an unnecessary
alhambra_ingles_0708 Seite 187 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Caution Never fully drain the fuel tank, in this case, the irregularity of the fuel supply
may cause ignition problems. This allows unburnt fuel to enter the exhaust
system, which could cause overheating and damage the catalytic converter.
For the sake of the environment Even when the emission control system is working perfectly, there may be a
smell of sulphur from the exhaust under some conditions. This depends on
the sulphur content of the fuel used. Quite often the problem can be reme-
died by changing to another brand of fuel.
Diesel engine particulate filter*
The diesel engine particulate filter eliminates soot produced
by burning diesel.
The diesel engine dust filter eliminates most of the soot from the exhaust gas
system. Under normal driving conditions, the filter cleans itself. If driving
conditions do not allow the filter to clean itself (for example, multiple short
trips) the filter will be obstructed by dust and pollen and the diesel engine
particulate filter warning lamp will light up.
WARNING
The diesel engine particulate filter may reach extremely high tempera- tures; it should not enter into contact with flammable materials under- neath the vehicle. Failure to comply could result in fire.
Caution The vehicle has not been
(biodiesel) over 7%. The dies
percentage is exceeded.
Economical and e driving
Economical and enviro
Fuel consumption, environm
and tyres depends in large pa
ical driving style and anticipa
reduce fuel consumption by 1
pollution while saving money
As you drive try to anticipate
A vehicle uses most fuel when
are required to brake less ofte
let the vehicle roll with a gea ahead. The braking effect ach
brakes and tyres; emissions
(disconnection due to inertia
Change gear early to save en
An effective way of saving fue
Running the engine at high r
amount of fuel.
Driving and the environment188
sumption is proportionally higher. The engine
nsumption does not regularise until having
his is the reason why we recommend avoiding
sures
tyres at the correct pressure saves fuel. If the
o low, this can put the fuel consumption up by
eater rolling resistance, under-inflation also
irs handling.
ays be checked when the tyres are cold.
ough the year: they will increase fuel consump-
put up the fuel consumption, so it is worth
tment occasionally to make sure that no unnec-
orted.
ce for the sake of convenience, even when it is
of 100-120 km/h your car will use about 12%
tra wind resistance caused by the roof carrier
ator, which produces electricity. With the need
n is also increased. Because of this, always
hen you do not need them. Examples of equip-
ty are: the fan at high speeds, the rear window
alhambra_ingles_0708 Seite 188 Mittwoch, 10. September 2008 10:55 10
Manual gearbox: Change from first to second gear as quickly as possible. We
recommend that, whenever possible, you change to a higher gear upon
reaching 2,000 rpms.
Automatic gearbox: Accelerate in moderation and avoid the kick-down (full
throttle) position.
Avoid driving at high speed
We advise you not to drive at the top speed permitted by the vehicle. Fuel
consumption, exhaust emissions and noise levels all increase very rapidly at
higher speeds. Driving at moderate speeds will help to save fuel.
Avoid idling
It is worthwhile switching off the engine when waiting in a traffic jam, at level
crossings or at traffic lights with a long red phase. The fuel saved after only
30 - 40 seconds is greater than the amount of fuel needed to restart the
engine.
The engine takes a very long time to warm up when it is running at idling
speed. Mechanical wear and pollutant emissions are also especially high
during this initial warm-up phase. It is therefore best to drive off immediately
after starting the engine. Avoid running the engine at high speed.
Periodic maintenance
Periodic maintenance work guarantees that, before beginning a journey, you
will not consume more than the required amount of fuel. A well-serviced
engine gives you the benefit of improved fuel efficiency as well as maximum
reliability and an enhanced resale value.
A badly serviced engine can consume up to 10% more fuel than necessary.
Avoid short journeys
To reduce the consumption and emission of polluting gases, the engine and
the exhaust filtration systems should reach the optimum service tempera- ture.
With the engine cold, fuel con
does not warm up and fuel co
driven some four kilometres. T
short trips wherever possible.
Maintain the correct tyre pres
Bear in mind that keeping the
tyre pressures are just 1 bar to
as much as 5 %. Due to the gr
increases tyre wear and impa
The tyre pressures should alw
Do not use winter tyres all thr
tion by up to 10 %.
Avoid unnecessary weight
Every kilo of extra weight will
checking the luggage compar
essary loads are being transp
A roof carrier is often left in pla
no longer needed. At a speed
more fuel as a result of the ex
even when it is not in use.
Save electrical energy
The engine activates the altern
for electricity, fuel consumptio
turn off electrical equipment w
ment that use a lot of electrici
heating or the seat heaters*.
Driving and the environment 189
Safety Fir Technical Data
ing must be taken into consideration:
atalytic converter ensure that unleaded petrol is
the chapter Refuelling. Automobile organisa-
out service station networks selling unleaded
ssible that a vehicle model is sold under condi-
are not available or that the Authorised Service
ited repairs.
ors will gladly provide information about the
vehicle in addition to necessary maintenance
dlights
nd drive vehicle in a left-hand drive country, or
pped beam headlights will dazzle oncoming
t apply stickers to certain parts of the headlight
available from your Authorised Service
alhambra_ingles_0708 Seite 189 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Environmental friendliness
Environmental protection is a top priority in the design, choice of materials
and production of your new Seat.
Design measures for economical recycling
Joints and connections designed for ease of dismantling
Modular construction to facilitate dismantling
Increased use of single-grade materials
Plastic parts and elastomers are labelled in accordance with ISO 1043,
ISO 11469 and ISO 1629
Choice of materials
Nearly all materials used can be recycled
Similar types of plastics grouped together for easy recycling
Recycled materials used in manufacture
Reduction of volatile compounds in plastics
CFC-free refrigerant in air conditioning
Compliance with prohibited materials laws: cadmium, asbestos, lead,
mercury, chrome VI.
Manufacturing methods
Use of recycled material for manufacturing plastic parts
Solvent-free cavity sealing
Solvent-free wax for protecting the vehicles in transit
Solvent-free adhesives
No CFCs used in production
Surplus materials used extensively for energy conversion and building
materials
Overall water consumption reduced
Heat recovery systems
Water-soluble paint
Driving abroad
Notes
For driving abroad, the follow
For vehicles fitted with a c
available for the journey. See
tions will have information ab
fuel.
In some countries it is po
tions where some spare parts
Centre may only carry out lim
SEAT importers and distribut
technical preparation of your
and repair possibilities.
Adhesive strips for hea
If you have to drive a right-ha
vice versa, the asymmetric di
traffic.
To prevent dazzling, you mus
lenses. Further information is
Centre.
Driving and the environment190
t is the actual weight of the laden vehicle plus
trailer. If the maximum permissible trailer
eight of the vehicle may have to be reduced.
o that heavy objects are as near to the axle as
trailer must be secured to prevent them
um permitted pressure shown on the sticker on
t the tyre pressure of the trailer tyres in accord-
urer's recommendations.
ough of the road behind the trailer with the
the case you should have additional mirrors
ould be mounted on hinged extension
give sufficient vision to the rear.
ght may dazzle other drivers. Use the headlight
e of light. If you do not have headlight range
djusted by a qualified dealership.
a trailer. This could result in fatal accidents.
rivers, adjust the dipped beam according to ay occur.
alhambra_ingles_0708 Seite 190 Mittwoch, 10. September 2008 10:55 10
Trailer towing
What do you need to bear in mind when towing a trailer?
The vehicle can, if suitably equipped, be used to tow a trailer or caravan.
If the car is supplied with a factory-fitted towing bracket it will already have
the necessary technical modifications and meet the statutory requirements
for towing a trailer. If you wish to retrofit a towing bracket page 204.
Connectors
Your vehicle is fitted with a 12-pin connector for the electrical connection
between the trailer and the vehicle.
If the trailer has a 7-pin plug, you will need to use an adapter cable. This is
available from SEAT Service.
Trailer weight / draw bar loading
Never exceed the maximum permitted trailer weights. If you do not load the
trailer up to the maximum permitted trailer weight, you can then climb corre-
spondingly steeper gradients.
The maximum trailer weights listed are only applicable for altitudes up to
1,000 m above sea level. With increasing altitude the engine power and
therefore the vehicle's climbing ability are impaired because of the reduced
air density. The maximum trailer weight has to be reduced accordingly. The
weight of the vehicle and trailer combination must be reduced by 10% for
every further 1,000 m (or part thereof). Where possible, operate the trailer
with the maximum permitted draw bar weight on the ball joint of the towing
bracket, but do not exceed the specified limit.
The figures for trailer weights and draw bar weights given on the data plate
of the towing bracket are for certification purposes only. The correct figures
for your specific model, which may be lower than these figures for the towing
bracket, are given in the registration documents and Technical data.
Gross combination weight
The gross combination weigh
the actual weight of the laden
weight is to be utilized, the w
Distributing the load
Distribute loads in the trailer s
possible. Loads carried in the
moving.
Tyre pressure
Set tyre pressure to the maxim
the inside of the tank flap. Se
ance with the trailer manufact
Exterior mirrors
Check whether you can see en
standard mirrors. If this is not
fitted. Both exterior mirrors sh
brackets. Adjust the mirrors to
Headlight adjustment
If towing a trailer the dipped li
range control to lower the con
control, have the headlights a
WARNING
Never transport people in
To avoid dazzling other d the load. If not, an accident m
Driving and the environment 191
Safety Fir Technical Data
et from the luggage compartment
ng the key fig. 135 clockwise.
pletely in the direction of the arrow
he maximum.
towing bracket is pretensed.
cket.
the luggage compartment
g bracket.
et in its casing on the right-hand side of
ent. The bracket engages and the tension
ly fitted.
with instructions on fitting and removing the
racket.
s possible to store the cover of the tow-bar in a
pling must be stored securely to prevent it icle and causing injury.
ing bracket is being fitted, there is a risk of heel goes back on itself.
A1
A2
alhambra_ingles_0708 Seite 191 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Note Towing a trailer places additional demands on the vehicle. We recom-
mend additional services between the normal inspection intervals if the
vehicle is used frequently for towing a trailer.
Find out whether special regulations apply to towing a trailer in your
country.
Ball coupling of towing bracket
The removable ball coupling of the towing bracket is stored
with the tools on board behind the right-hand side trim of the
luggage compartment.
It is necessary to first tense the towing bracket removing the ball
coupling.
Remove the towing brack
Open the lock by turni
Take out the wheel com
and turn clockwise to t
Release the wheel. The
Remove the towing bra
Storing towing bracket in
First tension the towin
Place the towing brack
the luggage compartm
is released .
Check that it is correct
The ball coupling is provided
ball coupling of the towing b
If the ball coupling is fitted it
plastic bag next to the tools.
WARNING
The towing bracket ball cou being flung through the veh
When the pretensed tow injury in the event that the w
Fig. 135 Location of towing bracket
Driving and the environment192
during prolonged ascents, driving in a low gear
s monitor the temperature indicator for the
am
n towing a trailer. The ESP makes it easier to
snake.
alhambra_ingles_0708 Seite 192 Mittwoch, 10. September 2008 10:55 10
Note By law, the ball coupling must be removed if a trailer is not being towed and
it obscures the number plate.
When placing the towing bracket in the casing check that it is no longer
tensed and securely fastened.
Driving tips
Driving with a trailer always requires extra care.
Weight distribution
The weight distribution of a loaded trailer with an unladen vehicle is very
unfavourable. However, if this cannot be avoided, drive extra slowly to allow
for the unbalanced weight distribution.
Speed
The stability of the car and trailer is reduced with increasing speed. For this
reason it is advisable not to drive at the maximum permissible top speed in
unfavourable road, weather or wind conditions. This applies especially when
driving downhill.
You should always reduce speed immediately if the trailer shows the slightest
sign of snaking. Never try to stop the snaking by increasing speed.
Always brake in good time. If the trailer has an overrun brake, apply the
brakes gently at first and then firmly. This will prevent the jerking that can be
caused by the trailer wheels locking. Select a low gear (in both manual and
automatic gearboxes) in good time before going down a steep hill. This
enables you to use the engine braking effect to slow down the vehicle.
Overheating
At very high temperatures and
and high engine speed, alway
coolant.
Electronic Stabilisation Progr
Do not switch off the ESP whe
stabilise if the trailer starts to
Cleaning and caring for your vehicle 193
Safety Fir Technical Data
ain products may produce noxious vapours; l ventilated areas.
e, engine oil, nail varnish remover or other ic and highly flammable. There is a fire / explo-
hicle, or carry out any maintenance, switch off rake firmly and remove the key from the igni-
, mud or dust if the surface of the vehicle is dry.
e for cleaning purposes. This could damage the
hicle. Soak dirt, mud or dust with plenty of
nvironment products, try to select ones which are not
should not be disposed of with ordinary house-
osal information on the package.
alhambra_ingles_0708 Seite 193 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Cleaning and caring for your vehicle
General notes
Regular washing and care help maintain the value of your
vehicle.
Regular care
Regular and expert care helps to maintain the value of the vehicle. This may
also be one of the requirements for acknowledging warranty claims in the
event of corrosion or paint defects.
The best way to protect the car against environmental contaminants is to
wash and wax it frequently. The longer substances such as insects, bird drop-
pings, resinous tree sap, road dirt, industrial deposits, tar, soot or road salt
and other aggressive materials remain on the vehicle, the more damage they
do to the paintwork. High temperatures (for instance in strong sunlight)
further intensify the corrosive effect.
After the period when salt is put on the roads it is important to have the
underside of the vehicle washed thoroughly.
Car care products
Car care products are available from your Authorised Service Centre. Keep the
product instructions until you have used up the product.
WARNING
Car care products can be toxic. For this, they must always be kept closed in their original container. Keep out of children's reach. Failure to comply could result in poisoning.
Always read and observe the instructions and warnings on the package before using car care products. Improper use could damage your health or
your vehicle. The use of cert these should be used in wel
Never use fuel, turpentin volatile fluids. These are tox sion risk.
Before you wash your ve the engine, apply the handb tion.
Caution Never attempt to remove dirt
Never use a dry cloth or spong
paintwork or glass on your ve
water.
For the sake of the e When purchasing car care
harmful to the environment.
Left over car care products
hold waste. Observe the disp
WARNING (continued)
Cleaning and caring for your vehicle194
ughly with water.
ehicle gently using a chamois leather.
er seals and the surfaces they touch with
freezing. Apply silicone spray to the
en braking directly after washing the
s by braking several times.
be switched off before the vehicle is washed.
rms from cuts on sharp metal edges when inside of the wheel housings etc. Risk of
the brakes may affect braking efficiency. Risk
irt, mud or dust if the surface of the vehicle is
onge for cleaning purposes. This could scratch
r vehicle.
temperatures: if the vehicle is rinsed with a
into the lock cylinders or the gaps around the
or bonnet. Otherwise there is a risk of malfunc-
alhambra_ingles_0708 Seite 194 Mittwoch, 10. September 2008 10:55 10
Care of the vehicle exterior
Automatic car washes
The paint is so durable that the car can normally be washed without problems
in an automatic car wash. However, the effect on the paint depends to a large
extent on the design of the car wash, the brushes used, the filtering of the
wash water and the type of detergents and wax solutions used, etc.
After the car has been washed, the brakes could respond later than normal as
the brake discs and brake pads will be wet, or even frozen in winter. Dry the
brakes by braking several times.
WARNING
Moisture, ice and salt on the brakes may affect braking efficiency. Risk of accident.
Washing by hand
Washing the vehicle
First soften the dirt with plenty of water and rinse off.
Clean the vehicle with a soft sponge, a glove or a brush. Start on
the roof and work your way down. Use only light pressure.
Rinse the sponge or glove as much as possible.
Special car shampoo should only be used for very stubborn dirt.
Clean the wheels, sill panels etc. last using a different sponge or
glove.
Rinse the vehicle thoro
Dry the surface of the v
If it is cold, dry the rubb
a cloth to prevent them
rubber seals.
After cleaning the vehicle
If possible, avoid sudd
vehicle. Dry the brake
WARNING
The ignition must always
Protect your hands and a cleaning the underbody, the injury.
Moisture, ice and salt on of accident.
Caution Never attempt to remove d
dry. Never use a dry cloth or sp
the paintwork or glass on you
Washing the vehicle in low
hose, do not direct the water
doors, luggage compartment,
tion.
Cleaning and caring for your vehicle 195
Safety Fir Technical Data
concentrated jet or cylindrical jet (rotating ing distances and short cleaning times, visible cur to the tyres. This may cause an accident.
the brakes may affect braking efficiency. Risk
an 60C. This could damage the car.
hicle, maintain a sufficient distance from sensi-
xible hoses, plastic, sound proofing, etc. This is
pers painted in the same colour as the vehicle.
surface, the greater the wear on the material.
s the paintwork.
r car if water does not form small drops and run
lean.
ilable from your Authorised Service Centre.
rotects the paintwork from environmental
t is also effective in protecting against minor
regularly in the car wash, it is advisable to
of hard wax at least twice a year.
alhambra_ingles_0708 Seite 195 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
For the sake of the environment In the interests of environmental protection, the car should be washed only
in specially provided wash bays. This prevents toxic, oil-laden waste water
entering the sewerage system. In some districts, washing vehicles anywhere
else may be prohibited.
Note Do not wash the vehicle in direct sunlight.
Washing the car with a high pressure cleaner
Be particularly careful when using a high pressure cleaner!
Always observe the instructions for the high-pressure cleaner,
particularly those concerning the pressure and the spraying distance.
Increase the spraying distance for soft materials and painted
bumpers.
Do not use a high pressure cleaner to remove ice or snow from
windows page 196.
Never use concentrated jet nozzles or so-called dirt blasters
.
If possible, avoid sudden braking directly after washing the
vehicle. Dry the brakes by braking several times.
WARNING
Never wash tyres with a nozzle). Even at large spray and invisible damage can oc
Moisture, ice and salt on of accident.
Caution Do not use water hotter th
To avoid damage to the ve
tive materials for example: fle
especially important for bum
The closer the nozzle is to the
Waxing the car
Regular waxing protect
You need to apply wax to you
off the paintwork when it is c
Good quality hard wax is ava
A good coat of wax helps to p
contaminants page 193. I
scratches.
Even if a wax solution is used
protect the paint with a coat
Cleaning and caring for your vehicle196
exterior mirrors
ith commercially available, alcohol based
clean chamois leather or a lint-free cloth.
ove snow from the windows and mirrors.
eather to dry the windows. Chamois leathers
ted surfaces are not suitable for use on
ith wax deposits which would smear the
y to remove ice. If you use an ice scraper, push
t move it to and fro.
ne remover to clean off rubber, oil, grease and
ved with a special cleaner which is available
Centre. Wax deposits on the windscreen could
er. A window cleanser specifically for removing
ring if added to the windscreen washer fluid.
ll not remove wax deposits.
ter to remove snow and ice from windows and
glass to crack!
alhambra_ingles_0708 Seite 196 Mittwoch, 10. September 2008 10:55 10
Polishing the paintwork
Polishing brings back gloss to the paintwork.
Polishing is only necessary if the paint has lost its shine, and the gloss cannot
be brought back by applying wax. Polish can be obtained from your Author-
ised Service Centre.
The car must be waxed after polishing if the polish used does not contain wax
compounds to seal the paint page 195, Waxing the car.
Caution To prevent damage to the paintwork:
Do not use polishes and hard wax on painted parts with a matte finish or
on plastic parts.
Do not polish your vehicle in a sandy or dusty environment.
Caring for plastic parts
Solvents will damage plastic parts.
If normal washing fails to clean plastic parts, clean them with special solvent- free plastic cleaning and care products.
Caution The use of liquid air freshener directly over the air vents of the vehicle may
damage the plastic parts if the liquid is accidentally spilled.
Cleaning products which contain solvents will damage the material.
Cleaning windows and
Cleaning the windows
Moisten the windows w
glass cleaner.
Dry the windows with a
Removing snow
Use a small brush to rem
Removing ice
Use a de-icer spray.
Use a clean cloth or chamois l
which have been used on pain
windows. They will be soiled w
windows.
If possible use a de-icing spra
it in one direction only. Do no
Use window cleaner or a silico
silicone deposits.
Wax deposits have to be remo
from your Authorised Service
cause the wiper blades to judd
wax will stop the blades judde
Grease removing cleansers wi
Caution Never use warm or hot wa
mirrors. This could cause the
Cleaning and caring for your vehicle 197
Safety Fir Technical Data
can freeze up in winter.
ou should only use spray with lubricating and
th a damp cloth.
ith a soft, dry cloth.
ying results, use a specialist chrome cleaning ducts will remove stains and coatings from the
surfaces:
re product on chrome.
ome parts in a sandy or dusty environment.
ust from alloy wheels.
ent to clean the wheels.
alhambra_ingles_0708 Seite 197 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
The heating element for the rear window is located on the inner side of the
window. To prevent damage, do not put stickers over the heating elements on
the inside of the window.
Cleaning windscreen wiper blades
Clean wiper blades are essential for clear vision.
1. Use a soft cloth to remove dust and dirt from the windscreen
wiper blades.
2. Use window cleanser to clean the windscreen wiper blades. Use
a sponge or a cloth to remove stubborn stains.
Care of rubber seals
If rubber seals are well looked after, they will not freeze so
quickly.
1. Use a soft cloth to remove dust and dirt from the rubber seals.
2. Apply a specialist care product to the rubber seals.
The weather strips on the doors, windows, bonnet and rear lid will remain
pliable and last longer if they are treated with a suitable care product (for
example silicone spray).
Caring for rubber seals will also prevent premature ageing and leaks. The
doors will be easier to open. If rubber seals are well looked after, they will not
freeze so quickly in winter.
Door lock cylinders
The door lock cylinders
To de-ice the lock cylinders y
anti-corrosive properties.
Cleaning chrome parts
1. Clean chrome parts wi
2. Polish chrome parts w
If this does not provide satisf
product. Chrome cleaning pro
surface.
Caution To prevent scratching chrome
Never use an abrasive ca
Do not clean or polish chr
Cleaning alloy wheels
Every two weeks
Wash salt and brake d
Use an acid free deterg
Cleaning and caring for your vehicle198
ti-corrosion coatings to the exhaust pipes, t shields on the exhaust system. The heat of gine could cause them to ignite! This is a fire
partment
cleaning the engine compartment.
the surface of the power unit are given anti-
tory.
articularly important in winter when the car is
ads. To prevent the salt corroding the vehicle,
t should be thoroughly cleaned before and
e is able to provide the correct cleaning and
he necessary equipment. For this reason, we
performed by them.
is usually removed if the engine compartment
g solutions, or if you have the engine cleaned.
ould ensure that all surfaces, seams, joints and
partment are given anti-corrosion treatment
ine compartment, always observe the safety
alhambra_ingles_0708 Seite 198 Mittwoch, 10. September 2008 10:55 10
Every three months
Apply a hard wax compound to the wheels.
Alloy wheels require regular attention to preserve their appearance. It is
important to remove road salt and brake dust by washing the wheels at
regular intervals, otherwise the finish will be impaired.
Always use an acid-free detergent for alloy wheels.
Car polish or other abrasive agents should not be used. If the protective
coating is damaged, e.g. by stone impact, the damaged area should be
repaired immediately.
WARNING
Never wash tyres with a cylindrical jet. Even at large spraying distances and short cleaning times, visible and invisible damage can occur to the tyres. This may cause an accident.
Moisture, ice and salt on the brakes may affect braking efficiency. Risk of accident. If possible, avoid sudden braking immediately after washing the vehicle. Dry the brakes by braking several times.
Underbody sealant
The underside of the vehicle is coated to protect it from corro-
sion and damage.
The protective coating could be damaged when driving. We recommend that
the protective coating under the body and on the running gear should be
checked, and reinstated if necessary, before and after the winter season.
We recommend that repair work and additional anti-corrosion work is carried
out by your Authorised Service Centre.
WARNING
Do not apply underseal or an catalytic converter or the hea the exhaust system or the en hazard.
Cleaning the engine com
Take special care when
Anti-corrosion treatment
The engine compartment and
corrosion treatment at the fac
Good corrosion protection is p
frequently driven on salted ro
the entire engine compartmen
after the salting period.
Your Authorised Service Centr preserving products and has t
recommend having this work
The anti-corrosion protection
is cleaned with grease removin
If this job is carried out, you sh
components in the engine com
afterwards.
WARNING
When working in the eng warnings page 209.
Cleaning and caring for your vehicle 199
Safety Fir Technical Data
nd surface of the airbag module with cleansers ts cause the surface to become porous. If the ng plastic parts can cause substantial injuries.
tain solvents will damage the material.
with a clean cloth moistened with water.
satisfactory results, use a gentle soap
tain solvents will damage the material.
ers and fabric trim
im on the doors, headlining etc. can be cleaned
er or with dry foam and a soft brush.
alhambra_ingles_0708 Seite 199 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Switch off the engine, apply the parking brake firmly and always remove the key from the ignition before you open the bonnet.
Allow the engine to cool before you clean the engine compartment.
Do not clean the underside of vehicle, wheel arches without protecting your hands and arms. You may cut yourself on sharp-edged metal parts. Failure to comply could result in injury.
Moisture, ice and salt on the brakes may affect braking efficiency. Risk of accident. If possible, avoid sudden braking immediately after washing the vehicle.
Never touch the radiator fan. It is temperature-controlled and could start automatically, even when the key is removed from the ignition!
For the sake of the environment Fuel, grease and oil deposits could be removed when the engine is washed.
The polluted water must be cleaned in an oil separator. For this reason,
engine washing should be carried out only by a qualified workshop or a suit-
able filling station.
Care of the vehicle interior
Cleaning plastic parts and the dash panel
Use a clean, damp cloth to clean plastic parts and the dash
panel.
If this does not provide satisfactory results, use a special
solvent-free plastic cleaning product.
WARNING
Never clean the dash panel a containing solvents. Solven airbag inflates, disintegrati
Caution Cleaning products which con
Cleaning wooden trim*
Clean the wooden trim
If this does not provide
solution.
Caution Cleaning products which con
Cleaning cloth seat cov
Cloth seat covers and fabric tr
with a special interior cleans
WARNING (continued)
Cleaning and caring for your vehicle200
ght to prevent it from fading. However, slight
ity natural leather are normal.
olish, shoe cream, spot removers or similar
n stains should be removed by a qualified
seat belt working properly.
nd check all seat belts regularly.
eat belt right out and leave it out.
ts with a gentle soap solution.
ic to dry.
belt until it is dry.
s the belt will not retract correctly into the auto-
ning agents on the seat belts, as this can bbing. Ensure that the belts do not come into
alhambra_ingles_0708 Seite 200 Mittwoch, 10. September 2008 10:55 10
Cleaning leather*
Normal cleaning
Moisten a cotton or woollen cloth with water and wipe over the
leather surfaces.
Cleaning stubborn stains
More stubborn dirt can be removed using a mild soap solution
(pure liquid soap; two tablespoons diluted in one litre of water)
and a cloth.
Do not let the water soak through the leather or soak into the
seams.
Then wipe off with a soft, dry cloth.
Leather care
The leather should be treated regularly (about twice a year) with
a special leather-care product, which is available from your
Authorised Service Centre.
Apply these products very sparingly.
Then wipe off with a soft, dry cloth.
SEAT does everything possible to preserve the special qualities of leather, as
a natural product. Because of the natural properties of the specially selected
hides employed, the finished leather has a certain sensitivity to grease and
dirt, etc. so a degree of care is required in everyday use and when looking
after the leather.
Dust and grit in the pores and seams can scratch and damage the surface. If
the vehicle is left standing in the sun for long periods, the leather should be
protected against direct sunli
colour variations in high-qual
Caution Do not use solvents, wax p
products on leather.
To avoid damage, stubbor
workshop.
Cleaning seat belts
A dirty belt may stop the
Keep the seat belts clean a
Cleaning seat belts
Carefully pull the dirty s
Clean the dirty seat bel
Allow the seat belt fabr
Do not roll up the seat
If large stains form on the belt
matic belt retractor.
WARNING
Do not use chemical clea impair the strength of the we contact with corrosive fluids.
Cleaning and caring for your vehicle 201
Safety Fir Technical Data
alhambra_ingles_0708 Seite 201 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Check the condition of all seat belts at regular intervals. If you notice that the belt webbing, fittings, retractor mechanism or buckle of any of the belts is damaged, the belt must be replaced by a specialist workshop.
Do not attempt to repair a damaged seat belt yourself. The seat belts must not be removed or modified in any way.
Caution After cleaning, allow seat belts to dry completely before rolling them up.
Otherwise the belt retractors could become damaged.
Cleaning the cool/thermos box
Before using the insulated box for the first time, you should clean
it, using a household detergent.
Always clean the inside of the insulated box when it is soiled.
If you do not plan to use the insulated box for a long period, disconnect the
power supply and clean the inside and outside of the box. Place a folded
towel between the box and its lid. This prevents mould and damp stains
forming in the cooling and heating box.
WARNING (continued)
Accessories, parts replacement and modifications202
CE mark (European Union manufacturer
phone holders or drink holders, should never within the working range of, the airbags. If resulting injury if the airbag is triggered in an
ys be carried out according to our
the electronic components or software in the
ns. Due to the way the electronic components
s, other systems may be affected by the faults.
ty, lead to excessive wear of components, and
gistration documents.
es cannot be held liable for any damage
or work performed incorrectly.
d that all work should be performed by an
ng genuine and SEAT approved parts and
alhambra_ingles_0708 Seite 202 Mittwoch, 10. September 2008 10:55 10
Accessories, parts replacement and modifications
Accessories and parts
Always consult an Authorised Service Centre before
purchasing accessories and parts.
Your vehicle is designed to offer a high standard of active and passive safety.
Before purchasing accessories and parts, and before making technical
changes to your car, we recommend that you consult your Authorised Service
Centre.
SEAT dealerships will be happy to provide you with the latest information
about the use, legal requirements and recommendations from the manufac-
turer regarding accessories and parts.
We recommend you use only SEAT Approved Accessories and SEAT Approved Spare Parts. This way, SEAT can guarantee that the product in
question is suitable, reliable and safe. Authorised Service Centres have the
necessary experience and facilities to ensure that parts are installed correctly
and professionally.
Despite continuous observation of the market, SEAT is not able to assess the
reliability, safety and suitability of parts not approved by SEAT. For this reason
SEAT cannot assume responsibility for any non-genuine parts used, even if
these parts have been approved by an official testing agency or are covered
by an official approval certificate.
Any equipment subsequently installed which has a direct effect on the
vehicle and/or the way it is driven (e.g. cruise control system or electronically-
controlled suspension) must be approved by SEAT for use in your vehicle and
bear the e mark (the European Union's authorisation symbol).
If any additional electrical components are fitted which do not serve to
control the vehicle itself (for instance a refrigerator box, laptop or ventilator
fan, etc.), these must bear the
conformity declaration).
WARNING
Accessories, for example tele be fitted on the covers of, or they are, there is a danger of accident.
Modifications
Modifications must alwa
specifications.
Unauthorised modifications to
vehicle may cause malfunctio
are linked together in network
This can seriously impair safe
also invalidate your vehicle re
SEAT Authorised Service Centr
caused by modifications and/
For this reason, we recommen
Authorised Service Centre usi
accessories.
Accessories, parts replacement and modifications 203
Safety Fir Technical Data
Service Centre if you wish to use a mobile tele-
h a transmitting power in excess of 10 watts.
tion concerning the technical possibilities for
ay radios should be fitted only by a qualified
thorised Service Centre.
arily on driving. If you are distracted while cident.
ne mountings to the surfaces covering the ge of the airbags, danger of injury if the airbag
ones or two-way radios in the vehicle without agnetic radiation in the vehicle could exceed applies to external aerials that have not been
conditions could cause the electronics to
on causes of faults are:
installed,
ess of 10 watts.
instructions of your mobile telephone / two-way
alhambra_ingles_0708 Seite 203 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
WARNING
Incorrectly performed modifications or other work on your vehicle can lead to malfunctions and cause accidents.
Roof aerial*
The vehicle may be fitted with a collapsible roof aerial* with antitheft
system*, which can be folded backwards, when, for example, going through
an automatic carwash.
To fold
Unscrew the aerial rod, tilting it backwards into a horizontal position and then
screw in again.
To return to working position
Continue in the reverse order to that given in the previous instruction.
Mobile telephones and two-way radios
You will require an external aerial for mobile phones and two-
way radios.
SEAT has approved your vehicle for use with mobile telephones and two-way
radios providing the following conditions are observed:
The correct installation of an external aerial,
transmitting power of maximum 10 watts.
An external aerial is needed to give the equipment its optimal range.
First consult your Authorised
phone or a two-way radio wit
Here you will receive informa
retrofitting this equipment.
Mobile telephones and two-w
workshop, for example an Au
WARNING
Always concentrate prim driving you could have an ac
Never attach the telepho airbag units or within the ran is triggered.
If you use mobile teleph an external aerial, electrom authorised limits. This also correctly installed.
Caution Failure to observe the above
malfunction. The most comm
no external aerial,
external aerial incorrectly
transmitting power in exc
Note Please observe the operating
radio.
Accessories, parts replacement and modifications204
Fig. 136 Attachment points for towing bracket
alhambra_ingles_0708 Seite 204 Mittwoch, 10. September 2008 10:55 10
Retrofitting a towing bracket
The vehicle can be retrofitted with a towing bracket.
Accessories, parts replacement and modifications 205
Safety Fir Technical Data
alhambra_ingles_0708 Seite 205 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
If a towing bracket is to be retro-fitted to the car, it must be done according to
the instructions of the towing bracket manufacturer.
The attachment points for the towing bracket page 204, fig. 136 are
underneath the vehicle.
Always observe the minimum distance from the middle of the ball coupling to
the ground (350 to 420 mm). This also applies when the vehicle is fully laden,
including maximum drawbar load.
Fitting a towing bracket
Driving with a trailer implies additional work for the vehicle. Therefore,
before fitting a towing bracket, please contact an Authorised Service Centre
to check whether your cooling system needs modification.
Observe the legal requirements in your country (e.g. the fitting of a sepa-
rate pilot lamp).
Certain vehicle components, e.g. the rear bumper must be removed and
reinstalled. The towing bracket securing bolts have to be tightened using a
torque wrench, and a socket connected to the vehicle's electrical system. This
requires specialist knowledge and tools.
The figures in the illustration show the dimensions and attachment points
which must be observed if you are retrofitting a towing bracket.
WARNING
If a towing bracket is retrofitted, it should be done by a qualified dealer.
If the towing bracket is incorrectly fitted, this could cause a safety risk.
For your own safety, please observe the instructions provided by the manufacturer of the towing bracket.
Caution If the connector socket is not fitted correctly, this could cause damage to the
vehicle's electrical system.
AA
Checking and refilling levels206
observed when transporting a reserve e do not recommend carrying a spare fuel anister could be damaged in an accident and
pty on vehicles equipped with a catalytic
pply could cause misfiring. In this way the fuel
exhaust system, which could cause the cata-
amage.
ed from the vehicle paint finish as quickly as
herwise be damaged. Especially if biodiesel
7.
vironment operated correctly, it will switch itself off as
er attempt to fill beyond this point, as this will
el may leak out if ambient conditions are
alhambra_ingles_0708 Seite 206 Mittwoch, 10. September 2008 10:55 10
Checking and refilling levels
Refilling
The tank filler neck is located at the rear right-hand side of the vehicle.
The tank flap is locked and unlocked automatically by the central locking
system.
The fuel tank holds about 70 litres.
The tank cap can, once unscrewed, be hung on the tank flap fig. 137.
After filling up, screw the tank cap back in firmly and close the tank flap until
it engages.
WARNING
All legal stipulations must be supply. For safety reasons, w canister in the vehicle. The c leak.
Caution Never run the fuel tank em
converter. An irregular fuel su
can arrive without burning the
lyser to overheat resulting in d
Spilt fuel should be remov
possible as the paint could ot
fuel is being used page 20
For the sake of the en If the automatic filler nozzle is
soon as the tank is full. Nev
fill the expansion chamber. Fu
warm.
Fig. 137 Tank filler neck and tank flap
Checking and refilling levels 207
Safety Fir Technical Data
ll throttle can damage the engine when using
ower than the correct grade for the engine.
nvironment el would seriously impair the efficiency of the
to DIN EN 590 (EN = European standard). It
CN) of at least 51. The cetane number indicates
sel fuel.
age 206.
ly with the DIN EN 14.214 (FAME) Standard.
r obtained from rapeseed oil.
tion for Deutsches Institut fr Normung e.V.,
te.
.
viation Fatty Acid Methyl Ester
re can also be consulted to know if the vehicle
sel use.
alhambra_ingles_0708 Seite 207 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Petrol types
The correct petrol types are listed on a sticker inside the fuel
tank flap.
Only unleaded petrol, corresponding to the standard DIN EN 228, may be
used for vehicles with catalytic converters (EN = European Norm).
Fuel types are differentiated by the octane rating, e.g: 91, 95, 98 RON (RON
= Regulation Octane Number, unit for determining the knock resistance of
petrol). You may use petrol with a higher octane number than the one recom-
mended for your engine. However, this has no advantage in terms of fuel
consumption and engine power. If, in exceptional circumstances, the correct
octane rating is not available:
For engines which require Premium unleaded petrol (95 RON) the
following is valid: Regular unleaded fuel with 91 RON can also be used. This
can, however, result in a slight loss of power under certain driving conditions.
For engines which require Premium unleaded petrol (98 RON) the
following is valid: Premium unleaded fuel with 95 RON can also be used. This
can, however, result in a slight loss of power under certain driving conditions.
If premium unleaded petrol is not available, the engine can be run on
regular unleaded petrol with 91 RON as an emergency measure. In this
case only use moderate engine speeds and a light throttle. Avoid using full
throttle. Fill up with premium petrol as soon as possible.
Caution Petrol that follows EN 228 may be mixed with small quantities of ethanol.
However, the so-called bioethanol fuels available at commercial establish-
ments with reference E50 or E85, which contain a high percentage of ethanol,
may not be used, as they will damage the fuel system.
Even one tankfull of leaded fuel would permanently impair the efficiency
of the catalytic converter.
High engine speed and fu
petrol with an octane rating l
For the sake of the e Just one full tank of leaded fu
catalytic converter.
Diesel
Diesel*
Diesel fuel must correspond
must have a cetane number (
the ignition quality of the die
Notes on filling with fuel p
RME fuel*
The biodiesel fuel must comp
Biodiesel is a methyleste
DIN is a German abbrevia
the German standards institu
EN means European Norm
FAME is the English abbre
Your Authorised Service Cent
has been prepared for biodie
Checking and refilling levels208
nter.
iesel fuel, difficulties may be experienced at
e the fuel thickens due to wax separation. For
sel fuel is available in some countries during
d at temperatures as low as -22C.
atic conditions the diesel fuel sold generally
racteristics. Check with an Authorised Service
country concerned regarding the type of diesel
l filter pre-heater, making it well equipped for
res that the fuel system remains operational to
se winter-grade diesel which is safe to -15C.
to such an extent that the engine will not start
C, simply place the vehicle in a warm place for
inners, or similar additives) with diesel fuel.
system
stem raises the calorific capacity of the heating
d outside temperatures are very low. The
connects and disconnects automatically.
alhambra_ingles_0708 Seite 208 Mittwoch, 10. September 2008 10:55 10
Things to note about RME fuel (biodiesel)
The performance of a vehicle using biodiesel maybe somewhat reduced.
Fuel consumption of a vehicle using biodiesel may be slightly higher.
RME fuel can be used in winter at temperatures down to approx. -10C.
At outside temperatures below -10C, we recommend using winter diesel
fuel.
Your vehicle is designed to be refuelled with up to a maximum of 7%
blended biodiesel.
Caution RME fuel can damage the fuel system in vehicles which are not suitably
adjusted.
If you decide to use biodiesel in your vehicle, please use only RME fuel
which is DIN E 14,214 compliant.
If you use biodiesel that does not meet the required standard, the fuel
filter could become clogged.
Note In case of low exterior temperatures and a fuel biodiesel percentage of
higher than 50%, an increase in gas emission may occur during operation of
the independent heating.
The fuel filter may become clogged when fuel is changed to biodiesel. For
this reason, we recommend that, about every 300 or 400 km, following a fuel
change, also change the fuel filter. Also note the instructions in the Inspec-
tion and Maintenance plan.
If the vehicle is to remain parked for more than about two weeks, we
recommend filling the fuel tank with biodiesel and driving about 50 km in
order to avoid damage to the injection system.
Winter driving
Diesel can thicken in wi
Winter-grade diesel
When using summer-grade d
sub-zero temperatures becaus
this reason, winter-grade die
the cold months. It can be use
In countries with different clim
has different temperature cha
Centre or filling stations in the
fuels available.
Filter pre-heater
Your vehicle is fitted with a fue
operation in winter. This ensu
approx. -24C, provided you u
However, if the fuel has waxed
at temperatures of under -24
a while.
Caution Do not mix fuel additives (th
Supplementary heating
The supplementary heating sy
while the engine is running an
supplementary heating system
Checking and refilling levels 209
Safety Fir Technical Data
n the engine compartment unless you know
obs and have the correct tools! Have the work
rkshop if you are uncertain.
ables, e.g. coolant, engine oil, spark plugs and
ly developed. SEAT provides a constant flow of
Service Centres concerning modifications. For
at you have service fluids and consumables
rvice Centre. Please observe the relevant
e engine compartment of any motor vehicle is a
the engine compartment, e.g. checking and anger of injury and scalding as well as the risk
f you see steam, smoke or coolant escaping nt. Otherwise, there is a risk of sustaining eam or coolant is emitted, then allow the lly opening the bonnet.
d remove the key from the ignition.
d move the gear stick to neutral or selector
the vehicle.
arts. There is a risk of burns.
ot engine or on a hot exhaust gas system. This
uits in the electrical system, particularly at the are attached page 250. The battery could
fan. It is temperature controlled and could en the engine has been switched off and the
on!
alhambra_ingles_0708 Seite 209 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
The exhaust fumes produced are eliminated through an exhaust pipe below
the vehicle.
Note For short journeys, very low outside temperatures and a percentage of
biodiesel fuel of over 50 % too much smoke may be produced.
Every time the engine is switched off, the fan continues to operate for a
short time in order to more quickly cool the heater. When refuelling it is not
necessary to wait until the fan stops operating.
Working in the engine compartment
Safety instructions on working in the engine compartment
Any work carried out in the engine compartment or on the
engine must be carried out cautiously.
Before starting any work on the engine or in the engine compart-
ment:
1. Switch off the engine and remove the key from the ignition.
2. Apply the handbrake.
3. Move the gear stick to neutral or the selector lever to position P.
4. Wait for the engine to cool down.
5. Keep children away from the vehicle.
6. Raise the bonnet page 98.
You should not do any work i
exactly how to carry out the j
carried out by a qualified wo
All service fluids and consum
batteries, are being constant
information to the Authorised
this reason we recommend th
replaced by an Authorised Se
instructions page 202. Th
hazardous area .
WARNING
All work on the engine or in refilling fluids, involves the d of accident or fire.
Never open the bonnet i from the engine compartme burns. Wait until no more st engine to cool before carefu
Switch off the engine an
Apply the handbrake an lever to position P.
Keep children away from
Never touch hot engine p
Never spill liquids on a h is a fire hazard.
Avoid causing short-circ points where the jump leads explode.
Never touch the radiator start automatically, even wh key removed from the igniti
Checking and refilling levels210
nguisher on hand.
service fluids, make absolutely certain that you
servoirs. Failure to observe this point will result
ngine damage!
vironment ul to the environment. For this reason you
n the ground underneath your vehicle. If you
, have your vehicle inspected in a qualified
alhambra_ingles_0708 Seite 210 Mittwoch, 10. September 2008 10:55 10
Do not unscrew the cap on the expansion tank when the engine is hot. If the coolant is hot, the cooling system will be pressurised!
Protect face, hands and arms by covering the cap with a large, thick cloth to protect against escaping coolant and steam.
Always make sure you have not left any objects, such as cleaning cloths and tools, in the engine compartment.
If you have to work underneath the vehicle, you must use suitable stands additionally to support the vehicle, there is a risk of accident!. A hydraulic jack is insufficient for securing the vehicle and there is a risk of injury.
If any work has to be performed when the engine is started or with the engine running, there is an additional, potentially fatal, safety risk from the rotating parts, such as the drive belts, alternator, radiator fan, etc., and from the high-voltage ignition system. You should also observe the following points:
Never touch the electrical wiring of the ignition system.
Ensure that jewellery, loose clothing and long hair do not get trapped in rotating engine parts. Danger of death. Before starting any work remove jewellery, tie back and cover hair, and wear tight-fitting clothes.
Always think carefully about pressing the accelerator if a gear is engaged in either an automatic or manual gearbox. The vehicle could move, even if the handbrake is applied. Danger of death.
If work has to be carried out on the fuel system or on electrical compo- nents, you must observe the following safety notes in addition to the above warnings:
Always disconnect the battery. The vehicle must be unlocked when this is done, otherwise the alarm will be triggered.
Do not smoke.
Never work near naked flames.
Always have a fire exti
Caution When changing or topping up
fill the fluids into the correct re
in serious malfunctions and e
For the sake of the en Service fluids leaks are harmf
should make regular checks o
find spots of oil or other fluids
workshop.
WARNING (continued) WARNING (continued)
Checking and refilling levels 211
Safety Fir Technical Data
et, make sure that the windscreen wiper
he windscreen. Failure to do so could
pull the lever under the dashboard
tion indicated (arrow). The bonnet is
.
nd press the unlock button fig. 139 in
ow.
e point where it is held open by the gas
f you see steam, smoke or coolant escaping nt.
, smoke or coolant is emitted from the bonnet, net.
ort rod is inserted securely and properly in the
ine compartment, always observe the safety
alhambra_ingles_0708 Seite 211 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Opening the bonnet
The bonnet is released from inside the vehicle.
Before you open the bonn
arms are in contact with t
damage the paintwork.
Opening the bonnet
To release the bonnet,
fig. 138 in the direc
unlocked by a spring
Gently lift the bonnet a
the direction of the arr
Open the bonnet to th
struts.
WARNING
Hot coolant can scald!
Never open the bonnet i from the engine compartme
Wait until no more steam then carefully open the bon
Make sure that the supp holder in the open bonnet.
When working in the eng warnings page 209.
Fig. 138 Detail of foot- well area on driver's side: lever for unlocking the bonnet.
Fig. 139 Detail of radi- ator grille: lever for unlocking the bonnet.
Checking and refilling levels212
s
st conform with exact specifications.
ial, high quality, multi grade oil that can be
r except for those regions affected by extreme
is necessary for the correct operation and long
n it becomes necessary to replenish or change
complies to the VW standards.
onforming to the VW standards then oil
I standards with an appropriate viscosity at
uld be used instead. The use of this type of oil
on the performance of the engine for example,
consumption and a higher emission level.
ferent oils may be mixed as long as they all
rds) set out in the following page should
service oil; the container will display together
rol and diesel engines, the oil can be used for
alhambra_ingles_0708 Seite 212 Mittwoch, 10. September 2008 10:55 10
Closing the bonnet
Closing the bonnet
1. To close the bonnet, pull it down to overcome the gas strut pres-
sure.
2. Make sure that the bonnet catches onto its clasp. Do not press
down .
If the bonnet does not close properly, open it again and close it properly.
WARNING
If the bonnet is not closed properly, it could open while you are driving and completely obscure your view of the road. Risk of accident.
After closing the bonnet, always check that it is properly secured. The bonnet must be flush with the surrounding body panels.
If you notice that the bonnet latch is not secured when the vehicle is moving, stop the vehicle immediately and close the bonnet properly. Risk of accident.
Engine oil
Engine oil specification
The engine oil used mu
Specifications
The engine comes with a spec
used in all seasons of the yea
cold.
As the use of good quality oil
service life of the engine, whe
the oil, always use an oil that
If it is not possible to find oil c
conforming to the ACEA or AP
atmospheric temperature sho
may have some repercussions
long starting time, increased
If a top up is required then dif
conform to the VW standards.
The specifications (VW standa
appear on the container of the
the different standards for pet
both types of engines.
Checking and refilling levels 213
Safety Fir Technical Data
s selected according to the diagram.
re falls outside the limits of the scale for a short
equired.
climate that is constantly very cold or very
mixed with the engine oil. The deterioration
not covered by the warranty.
4 00
7 00/ VW 506 01
6 01
alhambra_ingles_0708 Seite 213 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Oil properties
Viscosity
The viscosity class of the oil i
When the ambient temperatu
period, an oil change is not r
Mono-grade oil
Single grade oils are generally not suitable for all year round use, due to
ranges of viscosity43).
These oils are only useful in a
warm.
Engine oil additives
No type of additive should be
caused by these additives is
Fig. 140 Types of oil according to temperature
Engine type Specification
Petrol VW 501 01/ VW 502 00/ VW 50
Diesel VW 505 00/ VW 505 01/ VW 50
Diesel Injector Pumpa)
a) Only use recommended oils, otherwise you may damage the engine.
VW 505 01/ VW 507 00/ VW 50
Diesel Injector Pump Motor 118 kWa) VW 506 01/ VW 507 00
Diesel Engines with Particulate filter (DPF)a) VW 507 00
43) Viscosity: oil density
Checking and refilling levels214
cloth and insert it again, pushing it in as
ut again and check the oil level.
ushing it in as far as it will go.
141 , you must not top up with oil.
u may top up with oil (approx. 0,5 l).
u must top up with oil (approx. 1,0 l).
onsume a certain amount of oil. Consumption
0 km. For this reason the engine oil level must
s, preferably when filling the tank and before a
ard, for instance during sustained high-speed
when towing a trailer or climbing on mountain
eferably be kept within area (but not above).
hen working on the engine or on components
ine compartment, always observe the safety
a do not start the engine. This could result
catalytic converter. Contact SEAT Service
AA
AA
AA
alhambra_ingles_0708 Seite 214 Mittwoch, 10. September 2008 10:55 10
Note Before a long trip, we recommend finding an engine oil that conforms to the
corresponding VW specifications and keeping it in the vehicle. This way, the
correct engine oil will always be available for a top-up if needed.
Checking the engine oil level
The engine oil dipstick indicates the level of the oil.
Before opening the bonnet, read and observe the warnings
page 209.
Park the vehicle on an even surface.
Stop the engine and wait a few minutes for the oil to drain back
into the sump.
Raise the bonnet page 211.
Pull out the dipstick.
Wipe the dipstick with a
far as it will go.
Then pull the dipstick o
Replace the dipstick, p
If the oil level is in area fig.
If the oil level is in area , yo
If the oil level is in area , yo
It is normal for the engine to c
can be up to 1.0 litres per 1,00
be checked at regular interval
journey.
When the engine is working h
motorway cruising in summer,
passes, the oil level should pr
WARNING
Special care must be taken w in the engine compartment.
When working in the eng warnings page 209.
Caution If the oil level is above the are
in damage to the engine and
Centre.
Fig. 141 Dipstick
AB
AC
Checking and refilling levels 215
Safety Fir Technical Data
ge 212.
nsure that no oil comes into contact with hot pping up.
ea do not start the engine. This could result
catalytic converter. Contact a qualified work-
nvironment bove area . Otherwise oil can be drawn in
er and escape into the atmosphere via the
changed at the intervals given in the
the engine oil changed by an Authorised
ntervals are shown in the Inspection and Main-
if you have the specialist knowledge required!
AA
AA
alhambra_ingles_0708 Seite 215 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Topping up engine oil
Top up gradually with small quantities of oil.
Before opening the bonnet, read and observe the warnings in
Safety instructions on working in the engine compartment on
page 209.
Unscrew cap from oil filler opening fig. 142.
Top-up oil in small amounts, using the correct oil.
To avoid over-filling with engine oil, you should top-up using
small quantities, wait a while and check the oil level before
adding any more oil.
As soon as the oil level is in area , carefully close the cap.
The position of the oil filler opening is shown in the corresponding engine
compartment diagram page 262.
Engine oil specification pa
WARNING
Oil is highly inflammable! E engine components when to
Caution If the oil level is above the ar
in damage to the engine and
shop.
For the sake of the e The oil level must never be a
through the crankcase breath
exhaust system.
Changing engine oil
The engine oil must be
service schedule.
We recommend that you have
Service Centre.
The two different oil change i
tenance Plan.
WARNING
Only change the oil yourself
Fig. 142 In the engine compartment: Engine oil filler cap
AB
Checking and refilling levels216
ater and at least 40% coolant addi-
led with a mixture of water and at least 40 % of
an additive with the specification TT-VW 774 F
e gives the necessary frost protection down to
arts of the cooling system against corrosion. It
es the boiling point of the coolant.
ust always be at least 40% - even if frost
quired in very cold climates, the proportion of
can be increased. However, the percentage of
xceed 60%, as this would reduce the frost
ce the cooling effect. A mixture with 60%
protection to approx. -40C.
xic. There is a toxic risk. Always keep the al container which should be stored out of the pplies to coolant which you have drained off.
+ must be added in sufficient quantities to n at the coldest ambient temperatures that y cold ambient temperatures, the coolant icle to breakdown. As the heater would also
ere is a risk of suffering exposure!
alhambra_ingles_0708 Seite 216 Mittwoch, 10. September 2008 10:55 10
Before opening the bonnet, read and observe the warnings page 209, Safety instructions on working in the engine compartment.
Wait for the engine to cool down. Hot oil may cause burn injuries.
Wear eye protection to avoid injuries caused by splashes of oil.
When removing the oil drain plug with your fingers, keep your arm hori- zontal to help prevent oil from running down your arm.
Wash your skin thoroughly if it comes into contact with engine oil.
Engine oil is poisonous! Used oil must be stored in a safe place out of the reach of children until it is disposed of.
Caution No additives should be used with engine oil. This could result in engine
damage. Any damage caused by the use of such additives would not be
covered by the factory warranty.
For the sake of the environment Because of the disposal problems, the necessary special tools and
specialist knowledge required, we recommend that you have the engine oil
and filter changed by an Authorised Service Centre.
Never pour oil down drains or into the ground.
Use a suitable container when draining the used oil. It has to be large
enough to hold all the engine oil
Coolant
Coolant specifications
Coolant is a mixture of w
tive.
The cooling system must be fil
our coolant additive G 12+ or
(it is dyed purple). This mixtur
-25C and protects the alloy p
also prevents scaling and rais
The concentration of coolant m
protection is not required.
If greater frost protection is re
the antifreeze additive G 12+
coolant additives should not e
protection. It would also redu
coolant additive will give frost
WARNING
The coolant additive is to coolant additive in the origin reach of children. The same a
The coolant additive G 12 provide anti-freeze protectio can be expected. At extremel could freeze, causing the veh not work in this situation, th
WARNING (continued)
Checking and refilling levels 217
Safety Fir Technical Data
nsion tank
nd allow it to cool.
ver the cap on the expansion tank with a
ly unscrew the cap .
lant expansion tank and read off the
th the MIN mark, top up with coolant.
AX mark.
sion tank
n tightly.
pansion reservoir is shown in the corresponding
page 262.
eets the required specifications page 216.
additive if coolant additive G 12+, is not avail-
ter and bring the coolant concentration back up
s possible by putting in the specified additive
nt.
ark. Otherwise the excess coolant will be forced
en the engine is hot.
alhambra_ingles_0708 Seite 217 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Caution Other additives may give considerably inferior corrosion protection. The
resulting corrosion in the cooling system can lead to a loss of coolant,
causing serious damage to the engine.
The coolant additive G 12+ (purple) can be mixed with the additive G 12
(red) or G 11. Never mix G12 (red colour) with G 11.
Checking the coolant level and topping up
The correct coolant level is important for fault-free func-
tioning of the engine cooling system.
Before opening the bonnet, read and observe the warnings in
Safety instructions on working in the engine compartment on
page 209.
Opening the coolant expa
Switch off the engine a
To prevent scalding, co
thick cloth and careful
Checking coolant level
Look into the open coo
coolant level.
If the level is undernea
Topping up coolant
Only use new coolant.
Do not fill above the M
Closing the coolant expan
Screw the cap on agai
The position of the coolant ex
engine compartment diagram
Make sure that the coolant m
Do not use a different type of
able. In this case use only wa
to the correct level as soon a
page 216.
Always top up with new coola
Do not fill above the MAX m
out of the cooling system wh
Fig. 143 In the engine compartment: Coolant expansion tank cap
Checking and refilling levels218
windscreen wiper blades
he windscreen should always be
.
e headlight washing system are supplied with
her fluid container in the engine compartment.
right-hand side of the engine compartment.
ean the windscreen and headlights. We recom-
roduct to the windscreen washer fluid.
g products exist on the market with high deter-
s, these may be added all-year-round. Please
s on the packaging.
Fig. 144 In the engine compartment: Cap of windscreen washer fluid reservoir.
alhambra_ingles_0708 Seite 218 Mittwoch, 10. September 2008 10:55 10
The coolant additive G 12+ (dyed purple) may be mixed with G 12 (dyed red)
and also with G 11.
WARNING
Any work carried out in the engine compartment or on the engine must be carried out cautiously.
When working in the engine compartment, always observe the safety warnings page 209.
When the engine is warm or hot, the cooling system is pressurised! Do not unscrew the cap on the expansion tank when the engine is hot. This is a burn injury risk.
Caution When mixed with other additives the colour of G 12 will change to brown.
If this occurs you should have the coolant changed immediately. Failure to do
so will result in engine damage!
If a lot of coolant has been lost, wait for the engine to cool down before
putting in cold coolant. This avoids damaging the engine. Large coolant
losses are an indication of leaks in the cooling system. See a specialised
workshop immediately and have the cooling system checked. Otherwise,
there is a risk of engine damage.
Washer fluid and
Topping up washer fluid
The water for cleaning t
mixed with washer fluid
The windscreen washer and th
fluid from the windscreen was
The reservoir is located on the
Plain water is not enough to cl
mend that you always add a p
Approved windscreen cleanin
gent and anti-freeze propertie
follow the dilution instruction
Checking and refilling levels 219
Safety Fir Technical Data
e wiper blades regularly. Change them as
iper blades
from the glass. Do not pull the arm by the
s shown by arrow fig. 145 as far as
it off as shown by arrow fig. 146 .
e of the same length and version onto the
wiper blade to the stop against the direc-
.
the starting position.
T Service.
t be changed if they are damaged, or cleaned if
Fig. 146 Removing front wipers
A1
A2
alhambra_ingles_0708 Seite 219 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
WARNING
Any work carried out in the engine compartment or on the engine must be carried out cautiously.
When working in the engine compartment, always observe the safety warnings page 209.
Caution Never put radiator anti-freeze or other additives into the windscreen
washer fluid.
Always use approved windscreen cleansing products diluted as per
instructions. If you use other washer fluids or soap solutions, the tiny holes
in the fan-shaped nozzles could become blocked.
Changing the front windscreen wiper blades
Damaged wiper blades should be replaced immediately.
Check the condition of th
required.
Change the windscreen w
Lift the wiper arm away
blade.
Turn the wiper blade a
it will go and then pull
Push a new wiper blad
wiper arm and turn the
tion shown by arrow
Place the wiper arm in
These are available from SEA
If the wipers scrape they mus
they are dirty.
Fig. 145 Windscreen wipers raised
A1
Checking and refilling levels220
r blade
should be replaced immediately.
wiper blade regularly. Change as
lade
from the rear window.
as shown by arrow fig. 147 and, at
wiper blade as shown by arrow .
e from the wiper arm.
blade from the wiper arm in the opposite
Fig. 147 Changing a rear wiper blade
A1
A2
alhambra_ingles_0708 Seite 220 Mittwoch, 10. September 2008 10:55 10
If this does not produce the desired results, the setting angle of the wind-
screen wiper arms might be incorrect. They should be checked by a qualified
workshop and corrected if necessary.
WARNING
Do not drive unless you have good visibility through all windows!
Clean the windscreen wiper blades and all windows regularly.
The wiper blades should be changed once or twice a year.
Caution Damaged or dirty windscreen wipers could scratch the windscreen.
Never use fuel, nail varnish remover, paint thinner or similar products to
clean the windows. This could damage the windscreen wiper blades.
Never move the windscreen wiper or windscreen wiper arm manually - this
could cause damage!
Note On fitting the wiper blades, do not exchange the driver and passenger
side blades.
Changing the rear wipe
A damaged wiper blade
Check the condition of the
required.
Changing the rear wiper b
Lift the wiper arm away
Release the wiper blade
the same time, pull the
Unhook the wiper blad
Now take off the wiper
direction to arrow .A2
Checking and refilling levels 221
Safety Fir Technical Data
id level
ed at the intervals given in the service
at the transparent brake fluid reservoir. It
een the MIN and MAX marks.
reservoir is shown in the corresponding engine
e 262. The brake fluid reservoir has a black and
ightly when the vehicle is being used as the
adjusted as they wear.
Fig. 148 In the engine compartment: Brake fluid reservoir cover
alhambra_ingles_0708 Seite 221 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Insert a new wiper blade of the same length and design in the
direction of arrow and hook the blade back onto the wiper
arm.
Now pull the wiper blade against the direction of arrow until
it engages.
Push the wiper arm back against the glass.
These are available from SEAT Service.
If the wiper scrapes, it should be replaced if damaged, or cleaned if soiled.
If this does not produce the desired results, the setting angle of the wind-
screen wiper arms might be incorrect. They should be checked by a qualified
workshop and corrected if necessary.
WARNING
Do not drive unless you have good visibility through all windows!
Clean the windscreen wiper blades and all windows regularly.
The wiper blades should be changed once or twice a year.
Caution Damaged or dirty windscreen wipers could scratch the windscreen.
Never use fuel, nail varnish remover, paint thinner or similar products to
clean the windows. This could damage the windscreen wiper blades.
Never move the windscreen wiper or windscreen wiper arm manually - this
could cause damage!
Note The wiper arms can be moved to the service position only when the
bonnet is properly closed.
Brake fluid
Checking the brake flu
The brake fluid is check
schedule.
Read off the fluid level
should always be betw
The position of the brake fluid
compartment diagram pag
yellow cap.
The brake fluid level drops sl
brake pads are automatically
A2
A2
Checking and refilling levels222
et to check the brake fluid level, read and e 209.
red in the closed original container in a safe . There is a toxic risk.
change according to the Maintenance kes may cause a vapour lock if the brake fluid ng. This would seriously affect the efficiency
of the vehicle. This may cause an accident.
paintwork. Wipe off any brake fluid from the
vironment d disposed of in the proper manner observing
alhambra_ingles_0708 Seite 222 Mittwoch, 10. September 2008 10:55 10
However, if the level goes down noticeably in a short time, or drops below the
MIN mark, there may be a leak in the brake system. A display on the instru-
ment panel will warn you if the brake fluid level is too low page 70.
WARNING
Before opening the bonnet to check the brake fluid level, read and observe the warnings page 209.
Changing the brake fluid
The Maintenance Program indicates the brake fluid change
intervals.
We recommend that you have the brake fluid changed by an Authorised
Service Centre.
Before opening the bonnet, please read and follow the warnings in
Safety instructions on working in the engine compartment on page 209 in
Working in the engine compartment.
Brake fluid absorbs moisture. In the course of time, it will absorb water from
the ambient air. If the water content in the brake fluid is too high, the brake
system could corrode. This also considerably reduces the boiling point of the
brake fluid. Heavy use of the brakes may then cause a vapour lock which
could impair the braking effect.
It is important that you use only brake fluid compliant with the US standard
FMVSS 116 DOT 4. We recommend the use of Genuine SEAT brake fluid.
WARNING
Brake fluid is poisonous. Old brake fluid impairs the braking effect.
Before opening the bonn observe the warnings pag
Brake fluid should be sto place out of reach of children
Complete the brake fluid Program. Heavy use of the bra is left in the system for too lo of the brakes and the safety
Caution Brake fluid could damage the
paintwork immediately.
For the sake of the en Brake fluid must be drained an
environmental regulations.
WARNING (continued)
Checking and refilling levels 223
Safety Fir Technical Data
ery terminals. High-energy sparks can cause
re of gases is released when the battery is should be charged in a well-ventilated room
acid and batteries.
ectrical system, you must switch off the consumers. The negative cable on the battery n a light bulb is changed, you need only switch
alarm by unlocking the vehicle before you alarm will otherwise be triggered.
battery from the vehicle electrical system, e cable and then the positive cable.
onsumers before reconnecting the battery. cable and then the negative cable. Never onnections. This could cause an electrical fire.
ttery, or one which has thawed. This could mical burns. Always replace a battery which
n freeze at temperatures around 0 C.
e is always connected to the battery.
ttery. This may be fatally explosive. Replace a ly.
ery if the ignition is switched on or if the engine
e the electrical system or electronic compo-
to direct sunlight over a long period of time, as
on can damage the battery housing.
alhambra_ingles_0708 Seite 223 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Battery
Warnings on handling the battery
WARNING
Always be aware of the danger of injury and chemical burns as well as the risk of accident or fire when working on the battery and the electrical system:
Wear eye protection. Protect your eyes, skin and clothing from acid and particles containing lead.
Battery acid is very corrosive and caustic. Wear protective gloves and eye protection. Do not tilt the batteries. This could spill acid through the vents. Rinse battery acid from eyes immediately for several minutes with clear water. Then seek medical care immediately. Neutralize any acid splashes on the skin or clothing with a soapy solution, and rinse off with plenty of water. If acid is swallowed by mistake, consult a doctor immedi- ately.
Fires, sparks, naked lights and smoking are prohibited. When handling cables and electrical equipment, avoid causing sparks and electrostatic
charge. Never short the batt injury.
A highly explosive mixtu under charge. The batteries only.
Keep children away from
Before working on the el engine, the ignition and all must be disconnected. Whe off the light.
Deactivate the anti-theft disconnect the battery! The
When disconnecting the disconnect first the negativ
Switch off all electrical c Reconnect first the positive reverse the polarity of the c
Never charge a frozen ba result in explosions and che has frozen. A flat battery ca
Ensure that the vent hos
Never use a defective ba damaged battery immediate
Caution Never disconnect the batt
is running. This could damag
nents.
Do not expose the battery
the intense ultraviolet radiati
Wear eye protection
Battery acid is very corrosive and caustic. Wear protec-
tive gloves and eye protection!
Fires, sparks, naked lights and smoking are prohibited!
A highly explosive mixture of gases is released when the
battery is under charge.
Keep children away from acid and batteries!
WARNING (continued)
Checking and refilling levels224
the vehicle battery
nce-free and is checked during the
ork on the vehicle battery requires
ces or if the vehicle is not driven for long
checked by a qualified workshop between the
nd you have problems starting the vehicle, the
this happens, we recommend you have the
Authorised Service Centre where it will be re-
charged by a qualified workshop only, as
logy have been installed and they must be
nment.
ed to suit the conditions of its location and has
he maintenance, performance and safety spec-
nly maintenance-free or cycle free leak-proof the standards T 825 06 and VW 7 50 73. This
on the batteries, you must read and observe ings on handling the battery on page 223.
alhambra_ingles_0708 Seite 224 Mittwoch, 10. September 2008 10:55 10
If the vehicle is left standing in cold conditions for a long period, protect
the battery from frost. If it freezes it will be damaged.
Checking the electrolyte level
The electrolyte level should be checked regularly in high-
mileage vehicles, in hot countries and in older batteries.
Open the bonnet and open the battery cover at the front in
Safety instructions on working in the engine compartment on
page 209 in Warnings on handling the battery on
page 223.
Check the colour display in the "magic eye" on the top of the
battery.
If there are air bubbles in the window, tap the window gently until
they disperse.
The position of the battery is shown in the corresponding engine compart-
ment diagram page 262.
The round window (magic eye) on the top of the battery changes colour,
depending on the charge level and electrolyte level of the battery.
If the colour in the window is colourless or bright yellow, the electrolyte level
of the battery is too low. Have the battery checked by a qualified workshop.
The colours green and black are used by the workshops for diagnostic
purposes.
Charging and changing
The battery is maintena
inspection service. All w
specialist knowledge.
If you often drive short distan
periods, the battery should be
scheduled services.
If the battery has discharged a
battery might be damaged. If
vehicle battery checked by an
charged or replaced.
Charging the battery
The vehicle battery should be
batteries using special techno
charged in a controlled enviro
Replacing a vehicle battery
The battery has been develop
special safety features.
Genuine SEAT batteries fulfil t
ifications of your vehicle.
WARNING
We recommend you use o batteries which comply with standard applies as of 2001.
Before starting any work the warnings in Warn
Checking and refilling levels 225
Safety Fir Technical Data
page 185.
ay vary, according to the type and make of tyre
ften not readily visible. If you notice unusual
one side, this may indicate that one of the tyres
be checked immediately by an Authorised
attern
indicates the direction of rotation on tyres with
erve the direction of rotation indicated when
tees optimum grip and helps to avoid aqua-
wear.
aximum grip in the first 500 km. Drive particu- f accident.
d tyres. This may cause an accident.
ration or if the vehicle pulls to one side when ediately and check the tyres for damage.
alhambra_ingles_0708 Seite 225 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
For the sake of the environment Batteries contain toxic substances such as sulphuric acid and lead. They
must be disposed of appropriately and must not be disposed of with ordinary
household waste.
Wheels
General notes
Avoiding damage
If you have to drive over a kerb or similar obstacle, drive very
slowly and as near as possible at a right angle to the kerb.
Keep grease, oil and fuel off the tyres.
Inspect the tyres regularly for damage (cuts, cracks or blisters,
etc.). Remove any foreign objects embedded in the treads.
Storing tyres
Mark tyres when you remove them to indicate the direction of
rotation. This ensures you will be able to install them correctly
when you replace them.
When removed, the wheels and/or tyres should be stored in a
cool, dry and preferably dark location.
Store tyres in a vertical position if they are not fitted on wheel
rims.
New tyres
New tyres have to be run in
The tread depth of new tyres m
and the tread pattern.
Concealed damage
Damage to tyres and rims is o
vibrations or the car pulling to
is damaged. The tyres should
Service Centre.
Tyres with directional tread p
An arrow on the tyre sidewall
directional tread. Always obs
fitting the wheel. This guaran
planing, excessive noise and
WARNING
New tyres do not have m larly carefully to avoid risk o
Never drive with damage
If you notice unusual vib driving, stop the vehicle imm
Checking and refilling levels226
dependent on tyre pressure, driving
Fig. 149 Tyre tread wear indicators
Fig. 150 Changing wheels
alhambra_ingles_0708 Seite 226 Mittwoch, 10. September 2008 10:55 10
Checking tyre pressure
The correct tyre pressure can be seen on the sticker on the
inside of the tank flap.
1. Read the required tyre inflation pressure from the sticker. The
values refer to Summer tyres. For Winter tyres, you must add 0.2
bar to the values given on the sticker.
2. The tyre pressures should only be checked when the tyres are
cold. The slightly raised pressures of warm tyres must not be
reduced.
3. Adjust the tyre pressure to the load you are carrying.
Tyre pressure
The correct tyre pressure is especially important at high speeds. The pressure
should therefore be checked at least once a month and before starting a
journey.
WARNING
A tyre can easily burst if the pressure is too low, causing an accident!
At continuously high speeds, a tyre with insufficient pressure flexes more. In this way it becomes too hot, and this can cause tread separation and tyre blow-out. Always observe the recommended tyre pressures.
If the tyre pressure is too low or too high, the tyres will wear prema- turely and the vehicle will not handle well. Risk of accident!
For the sake of the environment Under-inflated tyres will increase fuel consumption.
Tyre service life
The service life of tyres is
style and fitting.
Checking and refilling levels 227
Safety Fir Technical Data
accidents if a tyre bursts during driving!
ed at the latest when the tread is worn down to ilure to do so could result in an accident. Worn h speeds on wet roads. There is also a greater
eds, a tyre with insufficient pressure flexes heat. This can cause tread separation and tyre
lways observe the recommended tyre pres-
ear, you should have the running gear checked ntre.
oil, fuel and brake fluid away from tyres.
res must be replaced immediately!
nvironment ase fuel consumption.
ave to be run-in.
an essential part of the vehicle's design. The
EAT are specially matched to the characteristics
jor contribution to good road holding and safe
east in pairs and not individually (i.e. both front
er). A knowledge of tyre designations makes it
alhambra_ingles_0708 Seite 227 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Wear indicators
The original tyres on your vehicle have 1.6 mm high tread wear indicators
page 226, fig. 149, running across the tread. Depending on the make,
there will be six to eight of them evenly spaced around the tyre. Markings on
the tyre sidewall (for instance the letters TWI or other symbols) indicate the
positions of the tread wear indicators. The minimum tread depth required by
law is 1.6 mm (measured in the tread grooves next to the tread wear indica-
tors). Worn tyres must be replaced. Different figures may apply in export
countries .
Tyre pressure
Incorrect tyre pressure causes premature wear and could cause tyre blow-out.
For this reason, the tyre pressure should be checked at least once per month
page 226.
Driving style
Fast cornering, heavy acceleration and hard braking all increase tyre wear.
Changing wheels around
If the front tyres are worn considerably more than the rear ones it is advisable
to change them around as shown page 226, fig. 150. All the tyres will then
last for about the same time.
Wheel balance
The wheels on new vehicles are balanced. However, various factors encoun-
tered in normal driving can cause them to become unbalanced, which results
in steering vibration.
Unbalanced wheels should be rebalanced, as they otherwise cause excessive
wear on steering, suspension and tyres. A wheel must also be rebalanced
when a new tyre is fitted.
Incorrect wheel alignment
Incorrect wheel alignment causes excessive tyre wear, impairing the safety of
the vehicle. If tyres show excessive wear, you should have the wheel align-
ment checked by an Authorised Service Centre.
WARNING
There is a serious danger of
The tyres must be replac the tread wear indicators. Fa tyres do not grip well at hig risk of aquaplaning.
At continuously high spe more. This causes it to over blow-out. Risk of accident. A sures.
If tyres show excessive w by an Authorised Service Ce
Keep chemicals such as
Damaged wheels and ty
For the sake of the e Under-inflated tyres will incre
New tyres and wheels
New tyres and wheels h
The tyres and wheel rims are
tyres and rims approved by S
of the vehicle and make a ma
handling .
Tyres should be replaced at l
tyres or both rear tyres togeth
Checking and refilling levels228
on tyres that are more than six years old. If should drive slowly and with extra care at all
se with an unknown history of use.
ed, you must ensure that the flow of air to the could cause them to overheat.
itted with radial tyres of the same type, size e same tread pattern.
vironment according to the laws in the country concerned.
not generally possible to use the wheels from
pply to wheels of the same model. The use of
t been approved by SEAT for use with your
icle's type approval for use on public roads.
same as the tyres that are mounted on the
er tyres - you should only use the spare tyre for
e with extra care. Refit the normal road wheel
htened to the correct torque.
atched to the rims. If different wheel rims are
with the right length and correctly shaped bolt
alhambra_ingles_0708 Seite 228 Mittwoch, 10. September 2008 10:55 10
easier to choose the correct tyres. Radial tyres have the tyre designations
marked on the sidewall, for example:
195/65 R15 91T
This contains the following information:
195 Tyre width in mm
65 Height/width ratio in %
R Tyre construction: Radial
15 Rim diameter in inches
91 Load rating code
T Speed rating
The tyres could also have the following information:
A direction of rotation symbol
Reinforced denotes heavy-duty tyres.
The manufacturing date is also indicated on the tyre sidewall (possibly only
on the inner side of the wheel).
DOT... 1105... means, for example, that the tyre was produced in the 11th
week of 2005.
We recommend that work on tyres and wheels is carried out by an Authorised
Service Centre. They are familiar with the procedure and have the necessary
special tools and spare parts as well as the proper facilities for disposing of
the old tyres.
Any Authorised Service Centre has full information on the technical require-
ments when installing or changing tyres, wheels or wheel trims.
WARNING
We recommend that you use only wheels and tyres which have been approved by SEAT for your model. Failure to do so could impair vehicle handling. Risk of accident.
Avoid running the vehicle you have no alternative, you times.
Never use old tyres or tho
If wheel trims are retrofitt brakes is not restricted. This
All four wheels must be f (rolling circumference) and th
For the sake of the en Old tyres must be disposed of
Note For technical reasons, it is
other vehicles. This can also a
wheels or tyres which have no
model may invalidate the veh
If the spare tyre is not the
vehicle - for example with wint
a short period of time and driv
as soon as possible.
Wheel bolts
Wheel bolts must be tig
The design of wheel bolts is m
fitted, the correct wheel bolts
WARNING (continued)
Checking and refilling levels 229
Safety Fir Technical Data
ter tyre sizes can be found in the vehicle's regis-
radial winter tyres. All tyre sizes listed in the
pply to winter tyres.
veness when the tread is worn down to a depth
e 227, New tyres and wheels determines the
hich can exceed the speed rating of the fitted
e sticker in the driver's field of view. These
ur Authorised Service Centre. The legal require-
e followed.
d for unnecessarily long periods. Vehicles with
hen the roads are free of snow and ice.
refer to the notes on the spare wheel
wheels.
winter tyres must not be exceeded. Otherwise, ge and thus, an accident risk.
nvironment time. They are quieter, do not wear so quickly
.
alhambra_ingles_0708 Seite 229 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
heads must be used. This ensures that wheels are fitted securely and that the
brake system functions correctly.
In certain circumstances, you may not use wheel bolts from a different car -
even if it is the same model page 202.
WARNING
If the wheel bolts are not tightened correctly, the wheel could become loose while driving. Risk of accident.
The wheel bolts must be clean and turn easily. Never apply grease or oil to them.
Use only wheel bolts which belong to the wheel.
If the prescribed torque of the wheel bolts is too low, they could loosen whilst the vehicle is in motion. Risk of accident! If the tightening torque is too high, the wheel bolts and threads could be damaged.
Caution The prescribed torque for wheel bolts for steel and alloy wheels is 120 Nm.
Winter tyres
Winter tyres will improve the vehicles handling on snow and
ice.
In winter conditions winter tyres will considerably improve the vehicles
handling. The design of summer tyres (width, rubber compound, tread
pattern) gives less grip on ice and snow.
Winter tyres must be inflated to a pressure 0.2 bar higher than the pressures
specified for summer tyres (see sticker on tank flap).
Winter tyres must be fitted on all four wheels.
Information on permitted win tration documents. Use only
vehicle documentation also a
Winter tyres lose their effecti
of 4 mm.
The speed rating code pag
following speed limits:
Q max. 160 km/h
S max. 180 km/h
T max. 190 km/h
H max. 210 km/h
In some countries, vehicles w
tyre must have an appropriat
stickers are available from yo
ments of each country must b
Do not have winter tyres fitte
summer tyres handle better w
If you have a flat tyre, please
page 227, New tyres and
WARNING
The maximum speed for the this could lead to tyre dama
For the sake of the e Fit your summer tyres in good
and reduce fuel consumption
Checking and refilling levels230
alhambra_ingles_0708 Seite 230 Mittwoch, 10. September 2008 10:55 10
Snow chains
Snow chains may be fitted only to the front wheels, and only to certain tyre
sizes page 260.
Snow chains must have fine-pitch links which do not protrude more that 15
mm, including tension device.
Remove wheel hub covers and trim rings before fitting snow chains. For safety
reasons cover caps, available in any Authorised Service Centre, must then be
fitted over the wheel bolts.
WARNING
Observe the fitting instructions provided by the snow chain manufacturer.
Caution You must remove the snow chains to drive on roads which are free of snow.
Otherwise they will impair handling, damage the tyres and wear out very
quickly.
Note In some countries, the speed limit for using snow chains is 50 km/h. The legal
requirements of the country should be followed.
If and when 231
Safety Fir Technical Data
n the luggage compartment, behind the side
cured using a thumb screw fig. 151 . The
ng items:
n socket in the handle for slackened wheel
ade is reversible. The screwdriver is in the wheel
3 mm
off the centre cover and the wheel bolt caps
Fig. 151 Storage of vehicle tools
A1
alhambra_ingles_0708 Seite 231 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
If and when
Vehicle tools*, spare wheel*, breakdown set* and towing bracket
Location
The vehicle tools, the spare wheel and the removable ball
coupling of the towing bracket are stored in the luggage
compartment.
Vehicle tool kit and removable ball coupling
The vehicle tool kit and removable towing bracket ball coupling are stored on
the right of the luggage compartment, behind a cover.
Spare wheel
The spare wheel is stored underneath the vehicle page 232.
Caution Make sure that the spare wheel / removed wheel and the tools are stored
safely in the luggage compartment.
Vehicle tools*
The vehicle tools are stored i
cover on the right and are se
tool kit comprises the followi
Tool box44)
Screwdriver with hexago
bolts. The screwdriver bl
bolt.
Towing eye, removable
Open jaw spanner 10 x 1
Wire hook44) for pulling
44) Optional equipment
A1
A2
A3
A4
A5
If and when232
eel
152 located on the floor of the luggage
he tailgate lock.
er seal upwards.
er from the vehicle tools.
he bolt, to the maximum, and hold in this
me press the safety ring downwards
several times to the left, until the spare
nging from a wire, vertically behind the
ces so that they may be inserted into the
rim and so free the wheel.
Fig. 152 Taking out the spare wheel
AB
AC
AD
alhambra_ingles_0708 Seite 232 Mittwoch, 10. September 2008 10:55 10
Box spanner for wheel bolts
Jack. Before you return the jack to the tool box, you must fully wind in the
claw. The crank must then be folded tight against the side of the jack.
The removable towing bracket44), the key for unlocking the sunroof in an
emergency44) and the anti-theft wheel bolt adaptor44) are stored next to the
vehicle tools.
Adapter for anti-theft wheel bolts
We recommend you carry the wheel bolt adapter44) in the vehicle tool kit at
all times.
The code number of the anti-theft wheel bolt is stamped on the front of the
adapter. You will need this number to replace the adapter if lost. Make a note
the code number of the anti-theft wheel bolt and keep it in a safe place - but
not in your vehicle.
WARNING
Do not use the hexagonal socket in the screwdriver handle to tighten the wheel bolts. It is not suitable for tightening the bolts to the necessary torque. This may cause an accident.
The jack supplied by the factory is only designed for changing wheels on this model. Never attempt to use it for lifting heavier vehicles or other loads. Risk of injury.
Use the jack only on firm, level ground.
Never start the engine when you have raised the vehicle on the jack. Risk of accident.
Never place your body (e.g. arm or leg) underneath the vehicle if it is only supported by the jack Risk of injury.
If you have to work underneath the vehicle, you must use suitable stands additionally to support the vehicle - Risk of accident!.
Taking out the spare wh
1. Lift the cover fig.
compartment, next to t
2. Pull the ring of the rubb
3. Remove the box spann
4. Fit the box spanner on t
position. At the same ti
.
5. Turn the box spanner
wheel can be fitted, ha
vehicle.
6. Separate the plastic pie
central aperture of the
A6
A7
AA
AC
If and when 233
Safety Fir Technical Data
er page 232, fig. 152 and turn the
luggage compartment several times to the
e wheel is firmly secured against the
ompartment floor in Taking out
age 232.
the rubber seal page 232, fig. 152
.
age compartment to a maximum torque of 25
AC
AB
alhambra_ingles_0708 Seite 233 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
WARNING
If you are driving without the spare wheel, the cable should be rolled up and the bracket fastened to the floor of the luggage compartment.
Fitting the defective wheel in the spare wheel casing
1. Place the wheel behind the vehicle.
2. Insert the support on the inside of the defective wheel, through
a central opening.
3. Insert the defective wheel below the vehicle, with the outer side
facing downwards.
4. Remove the box spann
bolt on the floor of the
right, until the defectiv
inside of the luggage c
the spare wheel on p
5. Close the opening with
and lower the cover
WARNING
Tighten the bolt of the lugg Nm.
Fig. 153 Resting point for the spare wheel on the bumper
AA
If and when234
bottle of tyre sealant Do not use sealant paste
re sealant can be obtained at any SEAT dealer.
sealant observing any legal requirements.
tions from the anti-puncture kit's manufacturer
ing bracket, it is first necessary to remove the
i-puncture kit.
cture kit
mm in diameter), particularly ones
led using the anti-puncture set.
p the car well away from moving traffic.
ing lights and set the emergency triangle
legal requirements when doing so.
d the bottle of sealant from the luggage
ure sticker fig. 154 and apply it to
here it can be seen clearly.
(e. g. screw, nail) in the tyre.
valve.
A2
alhambra_ingles_0708 Seite 234 Mittwoch, 10. September 2008 10:55 10
Components
Components
The anti-puncture kit contains the following components:
Tyre valve remover
Sticker indicating maximum speed max. 80 km/h or max. 50 mph
Filler tube with cap
Compressor
Tube for inflating tyres
Pressure gauge
Air bleed screw
ON/OFF switch
12 volt connector
Bottle of sealant Spare tyre valve
Caution Note the expiry date on the
that has expired. A bottle of ty
Dispose of used or expired
Likewise, note any instruc
(if included).
Note In vehicles fitted with a tow
tools in order to reach the ant
Preparation of anti-pun
Small punctures (up to 4
in the tread, can be sea
If you have a puncture, sto
Switch on the hazard warn
in position. Please observe
Take the compressor an
compartment.
Remove the anti/punct
the instrument panel w
Leave the foreign body
Take the cap off the tyre
Fig. 154 Contents of anti- puncture kit
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
Breakdown set*
If and when 235
Safety Fir Technical Data
or using the ON/OFF switch for at least
til a tyre pressure of between 2,0 and 2,5
This should take a maximum of 6 minutes.
r when the pressure reaches 2,0 and 2,5
is not reached, unscrew the valve inflator
pressor back in the vehicle.
10 metres forwards or backwards so that
istributed in the tyre interior.
ut again, screw the inflator tube well into
e tyre again.
e can still not be reached, the tyre is too
re cannot be sealed with the anti-puncture
avel in the vehicle and contact the nearest
ssor and unscrew the compressor tyre
e valve.
aximum speed of 80 km/h (50 mph) once
2.5 bar has been reached.
e after you have been driving for
A8
alhambra_ingles_0708 Seite 235 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Use the enclosed extractor page 234, fig. 154 to unscrew
the valve insert. Place the valve insert on a clean surface.
Vigorously shake the sealant bottle page 234, fig. 154 for
several seconds.
Sealing and inflating tyres
Inflating the tyre
Thread the inflating tube fig. 155 on the valve.
Check that the air bleed screw is screwed tight.
Start the engine and leave it running in neutral.
Attach the connector to a 12 volt socket of the vehicle.
Connect the compress
six minutes.
Run the compressor un
bar has been reached.
Detach the compresso
bars.
If the desired pressure
tube and store the com
Move the vehicle some
the sealant is evenly d
Take the compressor o
the valve and inflate th
If the required pressur
badly damaged. The ty
kit. Do not attempt to tr
qualified dealership.
Disconnect the compre
filler hose from the tyr
Drive the vehicle at a m
a tyre pressure of 2.0 -
Check the tyre pressur
10 minutes.
A1
A10
Fig. 155 Contents of anti- puncture kit
A5
A7
A9
If and when236
op the car well away from moving traffic. g lights and set the emergency triangle in l requirements when doing so.
ve the car.
ly and engage a gear or put the gear selector heel opposite the wheel being changed with
, unhitch it from your vehicle.
e been approved for your vehicle by SEAT.
n if they have been approved for use on other slip. Risk of injury.
en the vehicle is raised. This may cause an
g. arm or leg) underneath the vehicle if it is isk of injury.
neath the vehicle, you must use suitable rt the vehicle - Risk of accident!.
alhambra_ingles_0708 Seite 236 Mittwoch, 10. September 2008 10:55 10
WARNING
Do not allow the sealant to get onto your skin or into your eyes. Risk of injury.
Keep children away from the sealant.
Changing a wheel
Preparation
You must park the vehicle correctly before changing a tyre.
If you have a flat tyre or puncture, park the car as far away from
the flow of traffic as possible on a flat surface.
Switch off the engine. Switch on the hazard warning lights.
Apply the handbrake firmly and engage a gear or put the selector
in the P position.
Chock the wheel opposite the wheel being changed with a stone
or similar object.
If you are towing a trailer, unhitch it from your vehicle.
Remove the spare wheel and the vehicle tools from the luggage
compartment.
All passengers should leave the car. They should wait in a safe
place (for instance behind the safety barrier).
WARNING
If you have a puncture, st Switch on the hazard warnin position. Please observe lega
All passengers should lea
Apply the handbrake firm in the P position. Chock the w a stone or similar object.
If you are towing a trailer
Only use jacks which hav
Never use other jacks, eve SEAT models. The jack could
Never start the engine wh accident.
Never place your body (e. only supported by the jack R
If you have to work under stands additionally to suppo
If and when 237
Safety Fir Technical Data
the wheel bolts
ved from the wheel bolts before the
ed.
m the vehicle tool kit.
h the opening in the middle of the cap
move the caps.
olts and should be replaced after changing the
the caps click securely into place. They could
Fig. 157 Use the hook to pull off the cap
alhambra_ingles_0708 Seite 237 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Removing the hubcaps
The hubcaps must be removed to gain access to the wheel
bolts.
Take the wire hook from the vehicle tool kit.
Insert the hook into a hole in the cover fig. 156.
Pull off the cover.
Removing the caps from
The caps must be remo
wheel bolts are unscrew
Take the wire hook fro
Insert the hook throug
fig. 157.
Use the wire hook to re
The caps protect the wheel b
tyre.
When fitting, make sure that
otherwise fall off.
Fig. 156 Removing the hubcaps
If and when238
far as it will go over the wheel bolt
spanner and turn the wheel bolt one turn
l bolts
ti-theft wheel bolts out of the vehicle tool
to the wheel bolt. Push it in as far as it will
ar as it will go over the adapter.
spanner and turn the wheel bolt one turn
you may be able to loosen it by pushing down
ly with your foot. Hold on to the car for support
nly about one turn before raising the vehicle
outer ring, the grooved wheel bolts should d cause leaks resulting in accident.
alhambra_ingles_0708 Seite 238 Mittwoch, 10. September 2008 10:55 10
Loosening the wheel bolts
A special adapter is required to slacken the anti-theft wheel
bolts. It is contained in the vehicle tool kit.
Loosening wheel bolts
Fit the box spanner as
fig. 158.
Grip the end of the box
anti-clockwise .
Loosening anti-theft whee
Take the adapter for an
kit45).
Insert the adapter45) in
go fig. 159.
Fit the box spanner as f
Grip the end of the box
anti-clockwise .
Loosening wheel bolts
If the wheel bolt is very tight,
the end of the spanner careful
and take care not to slip.
WARNING
Loosen the wheel bolts o with the jack.
For wheels with a bolted never be loosened. This coul
Fig. 158 Changing the wheel: loosen the wheel bolts
Fig. 159 Changing the wheel: anti-theft wheel bolts and adapter
45) Optional equipment
If and when 239
Safety Fir Technical Data
til you have slackened the wheel bolts on
ove page 238.
int fig. 160 (arrow) closest to the
anged.
e jacking point until it just fits under the
the jack has full contact with the ground.
ntinue to crank the claw up until it is in
rtical rib fig. 161 (arrow) underneath
until the wheel is just clear of the ground.
at the jacking points shown fig. 160. The
11 cm from the wheel arch. The rear jacking
e wheel arch. Notches on both sides in the sills
ts are under the vehicle.
f or damage the vehicle if you do not observe
ck may cause the vehicle to slip off the jack. or the jack on the ground. If necessary use a r support. On a hard, slippery surface (such as
milar to prevent the jack from slipping.
the vertical rib under the sill properly so that en you are raising the vehicle fig. 161.
alhambra_ingles_0708 Seite 239 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Raising the vehicle
Raise the vehicle using only the designated jacking points.
Do not raise the vehicle un
the wheel you wish to rem
Jacking up the vehicle
1. Look for the jacking po
tyre which has to be ch
2. Raise the jack under th
car.
3. Check that the foot of
4. Adjust the jack and co
position around the ve
the vehicle .
5. Crank the jack further
The jack may be applied only
front jacking point is approx.
point is approx. 14 cm from th
show where the jacking poin
WARNING
You could injure yoursel the correct jacking points.
Soft ground under the ja Always provide a firm base f large, strong board or simila tiles) use a rubber mat or si
The jack claw must grasp the jack does not slip off wh
Fig. 160 The jacking points
Fig. 161 Jack at rear on right
If and when240
wheel. This is important so that these tyres can
excessive noise, tread wear and aquaplaning.
to mount a wheel so it rotates in the wrong
mely carefully. The tyre will not give optimum
rly important when driving on wet roads. To
f tyres with directional tread pattern, the tyre
s possible so that it rotates in the correct direc-
clean and turn easily. Do not grease or oil them.
e screwdriver handle should be used for
ot use it to loosen or tighten the wheel bolts.
defective tyre in the spare wheel bracket
ed as quickly as possible.
ue of the wheel bolts checked as soon as
wrench page 240.
the next opportunity.
euvres.
alhambra_ingles_0708 Seite 240 Mittwoch, 10. September 2008 10:55 10
Note The hexagonal socket in the screwdriver handle should be used for turning
wheel bolts only. Do not use it to loosen or tighten the wheel bolts.
Changing a wheel
Removing the wheel
Using the hexagonal socket in the screwdriver handle, unscrew
the slackened wheel bolts and place them on a clean surface.
Take off the wheel.
Store the defective wheel as described on page 233.
Fitting the spare wheel
Put the spare wheel in place.
Screw in the wheel bolts and tighten them lightly using the
hexagonal socket.
Lower the vehicle on the jack.
Tighten the wheel bolts firmly using the box spanner. Do not
tighten the bolts in clockwise or anti-clockwise sequence.
Tighten them in diagonal sequence.
Tyres with directional tread pattern
Tyres with directional tread pattern must be mounted so that they rotate in the
correct direction.
A directional tread pattern can be identified by arrows on the sidewall that
point in the direction of rotation. Always observe the direction of rotation
indicated when mounting the
give maximum grip and avoid
If, in an emergency, you have
direction, you must drive extre
performance. This is particula
benefit from the advantages o
should be replaced as soon a
tion.
Caution The wheel bolts should be
The hexagonal socket in th
turning wheel bolts only. Do n
After changing a wheel
Place the wheel with the
page 233.
Have the flat tyre replac
Have the tightening torq
possible with a torque
Check tyre pressure at
Avoid fast driving mano
If and when 241
Safety Fir Technical Data
find out where, and in which fuse box, the
ed page 242.
and the component concerned.
over fig. 162.
n the fuse box to remove the fuse.
he metal strip will have melted), replace it
same amp rating (same colour and same
its are protected by fuses. It is advisable to carry
es.
Fig. 162 Left side of dash panel fusebox
alhambra_ingles_0708 Seite 241 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
WARNING
If the prescribed torque of the wheel bolts is too low, they could loosen whilst the vehicle is in motion. Risk of accident! If the tightening torque is too high, the wheel bolts and threads could be damaged.
Caution The stipulated torque for the wheel bolts on steel wheels and alloy wheels is
170 Nm with a tolerance of 10 Nm. You should visit a specialised workshop
as soon as possible to check the torque with a torque wrench.
Note The wheel bolts should be clean and turn easily. Do not grease or oil them.
The hexagonal socket in the screwdriver handle should be used only for
turning wheel bolts which have been slackened off. Do not use it to loosen or
tighten the wheel bolts.
If you notice that the wheel bolts are corroded and difficult to turn when
changing a wheel, they must be replaced before you have the tightening
torque checked.
If the spare tyre is not the same as the tyres that are mounted on the car -
for example with winter tyres - you should only use the spare tyre for a short
period of time and drive with extra care. Refit the normal road wheel as soon
as possible.
Have the flat tyre replaced as quickly as possible.
Fuses
Changing a fuse
Use the fuse tables, to
damaged fuse is locat
Switch off the ignition
Remove the fuse box c
Use the plastic pliers i
If the fuse has blown (t
with a new fuse of the
imprint) and size.
The individual electrical circu
several spare fuses at all tim
If and when242
s and never replace them with higher rating
ws after a short time, you must have the elec-
alified dealership as soon as possible.
stronger fuse, you could cause damage to
cal system.
over one single fuse.
lacement fuses.
hicle. These should be changed by a qualified
alhambra_ingles_0708 Seite 242 Mittwoch, 10. September 2008 10:55 10
Colour coding of fuses WARNING
Never repair damaged fuse fuses. This could cause fires.
Note If a newly inserted fuse blo
trical system checked by a qu
If you replace a fuse with a
another location in the electri
Fuse table
The table shows the fuse locations for the most important consumers. The
right-hand columns contain the insert location, the figures in brackets indi-
cate the Ampre rating for the fuse. One single consumer could have more
than one fuse.
Several consumers could run
The fuse box has space for rep
There are other fuses in the ve
dealership.
Colour Amp rating
violet 3
light brown 5
brown 7,5
red 10
blue 15
yellow 20
transparent 25
green 30
Electrical consumer Symbol
Dipped headlights Electrical socket for trailer -
Turn signals Brake lights
If and when 243
Safety Fir Technical Data
alhambra_ingles_0708 Seite 243 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Main beam headlights Rear window heater Rear windscreen wiper Horn Interior lights Electric windows Usable electric windows Fog lights Rear fog light Hazard warning light switch Instrument panel lighting Climate control Heating Radio, navigation system /
Rear light -
Registration plate light
Electrical consumer Symbol
If and when244
alhambra_ingles_0708 Seite 244 Mittwoch, 10. September 2008 10:55 10
Windscreen washers Windscreen washer system Sliding sunroof Seat heating Mirror adjustment Heating the exterior mirrors Side lights Socket (luggage compartment) Central locking. -
Electrical consumer Symbol
If and when 245
Safety Fir Technical Data
rwards fig. 163 and remove .
er and separate.
Fig. 163 Side indicator
Fig. 164 Side indicator
A1 A2
alhambra_ingles_0708 Seite 245 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Changing a light
Bulbs, changing
Bulbs should be changed by a professional mechanic only.
Technical knowledge is required to change bulbs. This is because, in certain
cases, access can be gained only by removing other vehicle components.
This applies in particular to bulbs which can be accessed only from the
engine compartment.
We recommend bulbs are changed by a qualified dealership or, if this is not
possible, by a qualified person.
However, if you wish to change the bulb, please observe the following:
Before changing a bulb, you must switch off the light (light switch in O posi-
tion), and the turn signal lever must be in the neutral position.
Always replace damaged bulbs with identical bulbs with the same designa-
tion. The type is inscribed on the bulb, either on the glass or on the base.
You should store spare light bulbs in the vehicle for safety-relevant lights.
Bulbs can be obtained from SEAT Service Centres.
WARNING
The high voltage element of gas discharge lamps must be handled correctly. Failure to comply could result in fatal injuries.
H7* bulbs are pressurised and could explode when they are being changed. Risk of injury.
In vehicles fitted with gas discharge lamps *, there is a mortal danger if the high voltage section of the lamp is incorrectly handled.
When working in the engine compartment, always observe the safety warnings page 209.
Side indicator lamps
Slide the turn signal fo
Remove the lamp hold
If and when246
ggage compartment trim.
he direction of arrow fig. 165.
b into the bulb carrier, then turn it to the
rn to the right as far as possible.
ss in until the tabs click into place.
Fig. 165 Lights on vehicle body
alhambra_ingles_0708 Seite 246 Mittwoch, 10. September 2008 10:55 10
Remove the failed glass bulb and replace with a new bulb.
Insert the lamp holder in the turn signal guide rail.
First fit the turn signal in the opening of the chassis, securing
with the tabs fig. 164 and then, fit the bulb as shown by
the arrow .
Rear lights
Before changing a bulb, the tailgate should always be opened.
The lights have the following layout:
On the body
Turn signals, pilot light and brake/rear light
On the tailgate / rear door
Reversing light and rear antifog light.
Lights on vehicle body
Open the cover in the lu
Press the side tabs in t
Press the defective bul
left and remove it.
Fit the new bulb and tu
Fit the lampholder, pre
A1
A2
If and when 247
Safety Fir Technical Data
the direction of the arrow page 247,
e lampholder downwards.
lb into the bulb carrier, then turn it to the
rn to the right as far as possible.
he corresponding opening at the front
holder upwards at the back , until the
page 247, fig. 167.
o so, insert the the two tabs of the exterior
d the tailgate trim and push the cover
nto position.
t
A1
A2
Fig. 168 Registration light
alhambra_ingles_0708 Seite 247 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Lights on tailgate
Remove the cover in the trim.
Press the elastic tab in
fig. 166 and remove th
Press the defective bu
left and remove it.
Fit the new bulb and tu
Fit the lampholder in t
tab and press the lamp
elastic tab engages
Replace the cover. To d
part of the cover behin
upwards until it goes i
Registration plate ligh
Fig. 166 Lights on tail- gate
Fig. 167 Lights on tail- gate
If and when248
casing.
alhambra_ingles_0708 Seite 248 Mittwoch, 10. September 2008 10:55 10
Remove the glass
Remove the failed glass bulb and replace with a new bulb.
Bolt down the glass without overtightening, ensuring that the
seal is perfectly fitted.
Fit the reflector in the corresponding space in the tailgate
ensuring that the rubber seal and the light are assembled
correctly.
Do not bolt down the glass too tightly.
Interior light
Insert a fine screwdriver or similar between the casing and the
glass (arrow) fig. 169 and carefully remove the glass.
Replace the bulb.
Replace the glass in the
Fig. 169 Interior light
If and when 249
Safety Fir Technical Data
f the back of the lamp in the direction of
nd separate.
lamp (with glass bulb).
he casing and guide it towards the right as
rst on the left and then insert it in the
trim.
ve a sufficient wire cross section.
ause of a discharged battery, the battery can be
nother vehicle to start the engine.
the standard DIN 72553 (see manufacturer's
ss section must be at least 25 mm2 for petrol
for diesel engines.
ch each other, otherwise electricity could flow as
s are connected.
ust be properly connected to the vehicles elec-
alhambra_ingles_0708 Seite 249 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Reading light
Remove the complete bracket (interior light and reading light),
place the flat end of a screwdriver between the light and the
ceiling trim and turn the screwdriver.
Turn the lampholder o
the arrow fig. 170 a
Remove the defective
Fit a new lamp.
Replace the mount in t
far as possible.
Replace the bracket, fi
opening in the ceiling
Jump-starting
Jump leads
The jump lead must ha
If the engine fails to start bec
connected to the battery of a
Jump leads
Jump leads must comply with
documentation). The wire cro
engines and at least 35 mm2
Note The vehicles must not tou
soon as the positive terminal
The discharged battery m
trical system.
Fig. 170 Reading lights
Fig. 171 Reading lights
If and when250
f the black jump lead to a solid metal
lted on to the engine block, or onto the
e vehicle with the flat battery. Do not
ar the battery .
ch a way that they cannot come into
g parts in the engine compartment.
vehicle with the boosting battery and let
car with the flat battery and wait one or
ngine is running.
jump leads, switch off the headlights (if
er and rear window heater in the vehicle
s helps minimise voltage peaks which are
ds are disconnected.
ning, disconnect the leads in reverse
n above.
they have good metal-to-metal contact with
tch off the starter after about 10 seconds and
nute.
AX
alhambra_ingles_0708 Seite 250 Mittwoch, 10. September 2008 10:55 10
How to jump start: description
In fig. 172, the flat battery is and the charged battery .
Jump lead terminal connections
Switch off the ignition on both vehicles .
1. Connect one end of the red jump lead to the positive fig. 172
terminal of the vehicle with the flat battery .
2. Connect the other end of the red jump lead to the positive
terminal in the vehicle providing assistance.
3. Connect one end of the black jump lead to the negative terminal
on the battery of the vehicle providing assistance.
4. Connect the other end o
component which is bo
engine block itself of th
connect it to a point ne
5. Position the leads in su
contact with any movin
Starting
6. Start the engine of the
it run at idling speed.
7. Start the engine of the
two minutes until the e
Removing the jump leads
8. Before you remove the
they are switched on).
9. Turn on the heater blow
with the flat battery. Thi
generated when the lea
10. When the engine is run
order to the details give
Connect the battery clamps so
the battery terminals.
If the engine fails to start, swi
try again after about half a mi
Fig. 172 How to connect the jump leads
AA AB
A+
A+
A-
If and when 251
Safety Fir Technical Data
alhambra_ingles_0708 Seite 251 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
WARNING
Please note the safety warnings referring to working in the engine compartment page 209, Working in the engine compartment.
The battery providing assistance must have the same voltage as the flat battery (12V) and approximately the same capacity (see imprint on battery). Failure to comply could result in an explosion.
Never use jump leads when one of the batteries is frozen. Danger of explosion! Even after the battery has thawed, battery acid could leak and cause chemical burns. If a battery freezes, it should be replaced.
Keep sparks, flames and lighted cigarettes away from batteries, danger of explosion. Failure to comply could result in an explosion.
Observe the instructions provided by the manufacturer of the jump leads.
Do not connect the negative cable from the other vehicle directly to the negative terminal of the flat battery. The gas emitted from the battery could be ignited by sparks. Danger of explosion.
Do not attach the negative cable from the other vehicle to parts of the fuel system or to the brake line.
The non-insulated parts of the battery clamps must not be allowed to touch. The jump lead attached to the positive battery terminal must not touch metal parts of the vehicle, this can cause a short circuit.
Position the leads in such a way that they cannot come into contact with any moving parts in the engine compartment.
Do not bend over the batteries. This could result in chemical burns.
Note The vehicles must not touch each other, otherwise electricity could flow as
soon as the positive terminals are connected.
If and when252
of the vehicle
ed on the right of the front bumper fig. 173.
essary to remove the cover.
nt towing eye
irection shown by the arrow fig. 173 levering
ront towing eye
et and press until it is firmly in place.
itted.
be kept in the vehicle. Remember the instruc-
g that are in the user's manual
Fig. 173 Towing eye at the front of the vehicle
alhambra_ingles_0708 Seite 252 Mittwoch, 10. September 2008 10:55 10
Towing and tow-starting
Tow-starting*
The use of jump leads is preferable to tow-starting.
We recommend that you do not tow-start your vehicle. Jump-starting
is preferable page 249.
However, if your vehicle has to be tow-started:
Engage the 2nd or the 3rd gear.
Keep the clutch pressed down.
Switch on the ignition.
Once both vehicles are moving, release the clutch.
As soon as the engine starts, press the clutch and move the gear
lever into neutral. This helps to prevent driving into the towing
vehicle.
WARNING
The risk of accidents is high when tow-starting. The vehicle being towed can easily collide with the towing vehicle.
Caution When tow-starting, fuel could enter the catalytic converter and damage it.
Towing eye at the front
The towline anchorage is locat
To access the housing it is nec
Removing the cover of the fro
- Remove the cover in the d
it out with a screwdriver.
Assembling the cover of the f
- Put the cover into its sock
- Check that it is correctly f
The towing eye should always
tions for tow starting or towin
If and when 253
Safety Fir Technical Data
as to be tow-started:
r.
d down.
and switch on the hazard warning lights.
moving, release the clutch.
starts, press the clutch and move the gear
helps to prevent driving into the towing
when tow-starting. The vehicle being towed wing vehicle.
enter the catalytic converter and damage it.
ncerning towing should be observed.
ning lights of both vehicles. However, observe
ry.
icles with an automatic gearbox must not be
alhambra_ingles_0708 Seite 253 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Rear towline anchorage
On the right hand side of the lower rear section of the body, there is a fixed
towline anchorage fig. 174 (arrow).
Towing bracket
If the vehicle has a factory-fitted towing bracket, it should also be used for
towing other vehicles.
Tow-starting
The use of jump leads is preferable to tow-starting.
We recommend that you do not tow-start your vehicle. Jump-starting
is preferable page 250.
However, if your vehicle h
Engage 2nd or 3rd gea
Keep the clutch presse
Switch on the ignition
Once both vehicles are
As soon as the engine
lever into neutral. This
vehicle.
WARNING
The risk of accidents is high can easily collide with the to
Caution When tow-starting, fuel could
Note The legal requirements co
Switch on the hazard war
any regulations to the contra
For technical reasons, veh
tow-started.
Fig. 174 Rear towline anchorage
If and when254
-bar only to the towing eyes provided or a
nce, especially when using a tow-rope. Both
the technique required for towing. Inexperi-
pt to tow-start or tow away another vehicle.
wing vehicle and take care to avoid jerking the
unpaved road, there is always a risk of over-
chorage points.
ng towed must be switched on to prevent the
nd also to allow the use of the turn signals,
washers.
e hazard warning lights on and the ignition
ay be used to indicate that you are going to
rn signal lever accordingly. Meanwhile, the
ff. When the turn signal lever is returned to the
ing lights will automatically reconnect.
en the engine is running. In this case the pedal
does not work if the engine is not running, you
er than you normally would.
atic gearbox
N.
km/h when towing a vehicle.
km.
d, the vehicle must be towed with the front
alhambra_ingles_0708 Seite 254 Mittwoch, 10. September 2008 10:55 10
Notes for tow-starting or towing
If a cable is used for towing the vehicle, please observe the
following:
As the driver of the towing vehicle
Switch on the hazard warning lights. However, observe any regu-
lations to the contrary.
Drive slowly at first until the tow-rope is taut. Then accelerate
gradually.
Begin and change gears cautiously. If you are driving an auto-
matic vehicle, accelerate gently.
Remember that the brake servo and power steering are not
working in the vehicle you are towing. Brake earlier than you
would normally, but with a more gentle pressure on the brake.
As the driver of the vehicle being towed
Switch on the hazard warning lights. However, observe any regu-
lations to the contrary.
Place the gearstick in neutral or position N.
Ensure that the tow-rope remains taut at all times.
Tow-rope or tow-bar
It is easier and safer to tow a vehicle with a tow-bar. You should only use a
tow-rope if you do not have a tow-bar.
A tow-rope should be slightly elastic to reduce the loading on both vehicles.
It is advisable to use a tow-rope made of synthetic fibre or similarly elastic
material.
Attach the tow-rope or the tow
towing bracket.
Driving tips
Towing requires some experie
drivers should be familiar with
enced drivers should not attem
Do not pull too hard with the to
tow-rope. When towing on an
loading and damaging the an
The ignition of the vehicle bei
steering wheel from locking a
horn, windscreen wipers and
If the vehicle is towed, with th
switched on, the turn signal m
change direction. Move the tu
hazard warning lights will go o
rest position, the hazard warn
The brake servo works only wh
has to be pressed harder.
As the power assisted steering
will need more strength to ste
Towing vehicles with an autom
Move the selector lever to
Do not drive faster than 50
Do not tow further than 50
If a breakdown truck is use
wheels raised.
If and when 255
Safety Fir Technical Data
Fig. 175 Lifting with the lifting platform: lifting point at front left
Fig. 176 Lifting with the lifting platform: lifting point at rear left
alhambra_ingles_0708 Seite 255 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
WARNING
The braking behaviour and capacity of a vehicle changes when being towed or when you are trying to start the vehicle by pulling. Please observe the following notes in order to prevent injury and accident:
Inexperienced drivers should refrain from trying in order to avoid acci- dent.
Notes for the driver of the towed vehicle
The brake must be depressed must harder as the brake servo does not operate. Take care not to bump into the towing vehicle.
More strength is required at the steering wheel as the power steering does not operate when the engine is switched off.
Notes for the driver of the towing vehicle
Accelerate smoothly and avoid any sudden movement.
Brake more in advance than usual and brake gently.
Caution When tow-starting, fuel could enter the catalytic converter and damage it
page 252.
Note Observe legal requirements when towing or tow-starting.
For technical reasons, vehicles with an automatic gearbox must not be
tow-started.
If, due to a breakdown, the gearbox does not have lubricant, the vehicle
should be towed with the drive wheels suspended.
If it is necessary to tow a vehicle with an automatic gearbox for more than
50 km, it should be towed by qualified personnel and with the drive wheels
suspended.
Lifting the vehicle
Vehicle lifting points
If and when256
g platform, you must check there is sufficient
f the vehicle and the lifting platform.
alhambra_ingles_0708 Seite 256 Mittwoch, 10. September 2008 10:55 10
Your vehicle may only be lifted by a lifting platform at the points shown in the
illustrations page 255, fig. 175 and page 255, fig. 176 .
Using the jack to lift the vehicle page 239.
To prevent damage to the underside of the vehicle when lifting the vehicle,
rubber pads must be used.
Before driving onto a lifting platform, you must check there is sufficient clear-
ance between low parts of the vehicle and the lifting platform.
WARNING
If the lifting platform is inappropriate or the vehicle is lifted incorrectly, accidents or injuries may be caused. The vehicle could even fall from the lifting platform.
All occupants should leave the vehicle before it is lifted.
The vehicle must only be lifted at the points indicated in the diagrams page 255, fig. 175 and page 255, fig. 176. If the vehicle is not lifted at the indicated points, it may fall from the platform while the engine or gearbox is being dismounted, for example.
Never start the engine when the vehicle is raised. Risk of accident. The vehicle may fall from the platform due to the engine vibrations.
When work is being carried out underneath the vehicle, it must be secured using suitable frames. If not, an accident may occur.
To lift the vehicle, only two-pillar or two-post lifting platforms with sufficiently long arms and load-bearing capacity should be used.
Lifting platforms with fluid filled cushions may not be used for lifting the vehicle.
Caution The vehicle should never be lifted at the engine oil sump, the gearbox, or
the front or rear axle. This could cause serious damage to the vehicle.
Before driving onto a liftin
clearance between low parts o
General notes on the technical data 257
Safety Fir Technical Data
if additional equipment is fitted, for different
nd for other countries.
alhambra_ingles_0708 Seite 257 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Technical Data
General notes on the technical data
What you should be aware of
General notes
All data in the official vehicle documents take precedence over this data.
All data in these documents are valid for the basic model as offered in Spain.
The vehicle data card included in the inspection and maintenance schedule
in the vehicles registration documents show which engine is installed in the
vehicle.
The figures may be different
models, for special vehicles a
Abbreviations used in this paragraph of the Technical Data
Abbreviation Meaning
kW Kilowatt, engine power measurement.
bhp Brake horse power, formerly used to denote engine power
at rpm Revolutions per minute - engine speed.
Nm Newton metres, unit of engine torque.
l/100 km Fuel consumption in litres per 100 kilometres
g/km Carbon dioxide emissions in grams per kilometre.
CO2 Carbon dioxide
CN Cetane number, indication of the ignition quality of the diesel.
RON Research octane number, indication of the knock resistance of petrol.
General notes on the technical data258
alhambra_ingles_0708 Seite 258 Mittwoch, 10. September 2008 10:55 10
Vehicle identification data
Vehicle identification number
The vehicle identification number (chassis number) can be read from outside
the vehicle through a viewer in the windscreen. This is located on the left-
hand side of the vehicle in the lower area of the windscreen. It is also located
on the right hand side of the engine compartment.
Type plate
The type plate is located on the left rib inside the engine compartment.
Vehicle data
The data sticker is placed on the inside of the spare wheel recess in the
luggage compartment.
The following information can be found in the vehicle information:
Vehicle identification number (chassis number)
Vehicle type / engine power / gearbox type
Engine and gearbox code / paint number / interior equipment
Optional extras / PR numbers
This information also figures in the Maintenance Program.
General notes on the technical data 259
Safety Fir Technical Data
vehicle to another.
on figures are calculated in accordance with the
00/EC. These test requirements specify a real-
ormal everyday driving.
are applied:
in all gears, as in normal everyday driving. The
r the urban cycle and 63% for the extra urban
xide emissions. The gas composition is then
alhambra_ingles_0708 Seite 259 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
How are the figures measured?
Fuel consumption
The consumption and emission details shown on the vehicle data sticker differ from one
The fuel consumption, CO2 emissions and actual kerb weight of the vehicle
are noted on the vehicle data sticker.
The fuel consumption and emissions figures given are based on the weight
category of the car, which is determined according to the engine/gearbox
combination and the equipment fitted.
The consumption and emissi
EC test requirements 1999/1
istic test method based on n
The following test conditions
Note Actual consumption may vary from quoted test values, depending on
personal driving style, road and traffic conditions, the weather and the condi-
tion of the vehicle.
Urban cycle The urban cycle starts with an engine cold start. City driving is then simulated.
Extra urban cycle In the extra urban cycle the vehicle undergoes frequent acceleration and braking
road speed ranges from 0 to 120 km/h.
Combined The average overall consumption is calculated with a weighting of around 37% fo
cycle.
CO2 emissions The exhaust gases are collected during both driving cycles to calculate carbon dio
analysed to evaluate the CO2 content and other emissions.
General notes on the technical data260
t exerted by the trailer drawbar on the ball joint
t exceed 85 kg.
e recommend that you always tow
awbar load. The response of the trailer on the
r load is too small.
rawbar load cannot be met (e.g. with small,
axle trailers or tandem axle trailers with an axle
least 4% of the actual trailer weight is a legal
.
ould not drive at speeds above 80 km/h when plies to countries where higher speeds are
m trailer weights or the draw bar loading. If the permissible total weight is exceeded, the vehicle may change, leading to accidents, ehicle.
ins, wheel bolts
ure values can be found on the inside of the
lues given there are for cold tyres. The slightly
s must not be reduced.
alhambra_ingles_0708 Seite 260 Mittwoch, 10. September 2008 10:55 10
Weights
Kerb weight refers to the basic model with a fuel tank filled to 90% capacity
and without optional extras. The figure quoted includes 75 kg to allow for the
weight of the driver.
For special versions and optional equipment fittings or for the addition of
accessories, the weight of the vehicle will increase .
WARNING
Please note that the centre of gravity may shift when transporting heavy objects; this may affect the vehicle's handling and lead to an acci- dent. Always adjust your speed and driving style to suit road conditions and requirements.
Never exceed the gross axle weight rating or the gross vehicle weight rating. If the allowed axle load or the allowed total weight is exceeded, the driving characteristics of the vehicle may change, leading to accidents, injuries and damage to the vehicle.
Towing a trailer
Trailer weights
Trailer weights
The trailer weights and drawbar loads approved are selected in intensive
trials according to precisely defined criteria. The approved trailer weights are
valid for vehicles in the EU for maximum speeds of 80 km/h (in certain
circumstances up to 100 km/h). The figures may be different in other coun-
tries. All data in the official vehicle documents take precedence over these
data .
Drawbar load
The maximum permitted weigh
of the towing bracket must no
In the interest of road safety, w
approaching the maximum dr
road will be poor if the drawba
If the maximum permissible d
empty and light-weight single
base of less than 1 metre), at
stipulation for a drawbar load
WARNING
For safety reasons, you sh towing a trailer. This also ap permitted.
Never exceed the maximu the permissible axle load or driving characteristics of the injuries and damage to the v
Wheels
Tyre pressure, snow cha
Tyre pressures
The sticker with the tyre press
tank flap. The tyre pressure va
raised pressures of warm tyre
General notes on the technical data 261
Safety Fir Technical Data
alhambra_ingles_0708 Seite 261 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Snow chains
Snow chains may be fitted only to the front wheels.
Consult the chapter wheels of this manual.
Wheel bolts
After the wheels have been changed, the tightening torque of the wheel bolts
should be checked as soon as possible with a torque wrench . The tight-
ening torque for steel and alloy wheels is 120 Nm.
WARNING
Check the tyre pressure at least once per month. Correct tyre pressure is very important. If the tyre pressure is too high or too low, there is an increased danger of accidents, particularly at high speeds.
If the torque of the wheel bolts is too low, they could loosen whilst the vehicle is in motion. Risk of accident! If the tightening torque is too high, the wheel bolts and threads could be damaged.
Note We recommend that you ask your Authorised Service Centre for information
about appropriate wheel, tyre and snow chain size.
Technical Data262
ions and restrictions on the technical data are
alhambra_ingles_0708 Seite 262 Mittwoch, 10. September 2008 10:55 10
Technical Data
Checking fluid levels
From time to time, the levels of the different fluids in the
vehicle must be checked. Never fill with incorrect fluids, to do
so may cause serious damage to the engine.
Engine oil dipstick
Oil filler neck
Brake fluid reservoir
Vehicle battery (underneath a cover)
Coolant temperature deposit
Windscreen washer fluid reservoir
The checking and replenishment of the service fluids are carried out on the
components mentioned above. These operations are described in the
page 209.
Overview
Further explanations, instruct
contained as of page 257.
Fig. 177 Diagram for the location of the various elements
A1
A2
A3
A4
A5
A6
Technical Data 263
Safety Fir Technical Data
l 91 RONb)
alhambra_ingles_0708 Seite 263 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Petrol engine 2.0l 85 kW (115 bhp) 6 gear
General engine data
Performance figures
Consumption (litres/100 km)/ CO2 (g/km)
Power output in kW (bhp) rpm 85 (115)/ 5200
Maximum torque in Nm at rpm 170/ 2600-4200
No. of cylinders, capacity in cm 3 4/ 1984
Compression 10,5 0,5
Fuel Super 95 RONa) /Norma
a) Research-Octane-Number = Measure of the predetonation power of the petrol. b) With a slight power loss
Maximum speed in km/h 177
Acceleration from 0-80 km/h in sec. 10,6
Acceleration from 0-100 km/h in sec. 15,2
Urban cycle 12,8/302
Extra urban cycle 7,4/172
Combined 9,4/223
Technical Data264
91 RONb)
alhambra_ingles_0708 Seite 264 Mittwoch, 10. September 2008 10:55 10
Weights
Trailer weights
Engine oil capacity
Petrol engine 2.0 litre 85 kW (115 hp). Automatic
General engine data
Gross vehicle weight in kg 2430
Weight in working order (with driver) in kg 1653/1973
Gross axle weight, front in kg 1210
Gross axle weight, rear in kg 980
Permitted roof load in kg 75
With no brakes, gradients up to 12% 700
With brakes, gradients up to 12% 1800
Approximate engine oil capacity with oil filter change 4.0 litres
Power output in kW (bhp) rpm 85 (115)/ 5200
Maximum torque in Nm at rpm 170/ 2600-4200
No. of cylinders, capacity in cm 3 4/ 1984
Compression 10
Fuel Super 95 RONa)/Normal
a) Research-Octane-Number = Measure of the predetonation power of the petrol. b) With a slight power loss
Technical Data 265
Safety Fir Technical Data
alhambra_ingles_0708 Seite 265 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Performance figures
Consumption (litres/100 km)/ CO2 (g/km)
Weights
Trailer weights
Engine oil capacity
Maximum speed in km/h 173
Acceleration from 0-80 km/h in sec. 11,3
Acceleration from 0-100 km/h in sec. 17,2
Urban cycle 14,2/339
Extra urban cycle 8,1/195
Combined 10,4/250
Gross vehicle weight in kg 2450
Weight in working order (with driver) in kg 1673/1993
Gross axle weight, front in kg 1240
Gross axle weight, rear in kg 1280
Permitted roof load in kg 75
With no brakes, gradients up to 12% 700
With brakes, gradients up to 12% 1800
Approximate engine oil capacity with oil filter change 4.0 litres
Technical Data266
alhambra_ingles_0708 Seite 266 Mittwoch, 10. September 2008 10:55 10
Petrol engine 1.8l 110 kW (150 bhp) 6 gear
General engine data
Performance figures
Consumption (litres/100 km)/ CO2 (g/km)
Power output in kW (bhp) rpm 110 (150)/ 5800
Maximum torque in Nm at rpm 210/ 1800-4300
No. of cylinders, capacity in cm 3 4/ 1781
Compression 9,5 0,5
Fuel 95 super RONa)
a) Research-Octane-Number = Measure of the predetonation power of the petrol.
Maximum speed in km/h 199
Acceleration from 0-80 km/h in sec. 7,2
Acceleration from 0-100 km/h in sec. 10,9
Urban cycle 13,0/318
Extra urban cycle 7,4/178
Combined 9,4/225
Technical Data 267
Safety Fir Technical Data
alhambra_ingles_0708 Seite 267 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Weights
Trailer weights
Engine oil capacity
Petrol engine 1.8l 110 kW (150 bhp). Automatic
General engine data
Gross vehicle weight in kg 2450
Weight in working order (with driver) in kg 1674/1994
Gross axle weight, front in kg 1240
Gross axle weight, rear in kg 1280
Permitted roof load in kg 75
With no brakes, gradients up to 12% 700
With brakes, gradients up to 12% 1900
Approximate engine oil capacity with oil filter change 4.3 litres
Power output in kW (bhp) rpm 110 (150)/ 5500
Maximum torque in Nm at rpm 210/ 1850-4500
No. of cylinders, capacity in cm 3 4/ 1780
Compression 9,5
Fuel 95 super RONa)
a) Research-Octane-Number = Measure of the predetonation power of the petrol.
Technical Data268
1707/2027
alhambra_ingles_0708 Seite 268 Mittwoch, 10. September 2008 10:55 10
Performance figures
Consumption (litres/100 km)/ CO2 (g/km)
Weights
Trailer weights
Engine oil capacity
Maximum speed in km/h 195
Acceleration from 0-80 km/h in sec. 8,3
Acceleration from 0-100 km/h in sec. 12,1
Urban cycle 14,1/337
Extra urban cycle 8,2/197
Combined 10,3/247
Gross vehicle weight in kg 2480
Weight in working order (with driver) in kg 1707/2005
Gross axle weight, front in kg 1240
Gross axle weight, rear in kg 1280
Permitted roof load in kg 75
With no brakes, gradients up to 12% 700
With brakes, gradients up to 12% 1900
Approximate engine oil capacity with oil filter change 4.3 litres
Technical Data 269
Safety Fir Technical Data
95 RONb)
alhambra_ingles_0708 Seite 269 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Petrol engine 2.8l VR6150 kW (204 bhp) 6 gear
General engine data
Performance figures
Consumption (litres/100 km)/ CO2 (g/km)
Power output in kW (bhp) rpm 150 (204)/6200
Maximum torque in Nm at rpm 265/3400
No. of cylinders, capacity in cm 3 6/ 2792
Compression 10,75 0,25
Fuel Super 98 RONa)/Super
a) Research-Octane-Number = Measure of the predetonation power of the petrol. b) With a slight power loss
Maximum speed in km/h 217
Acceleration from 0-80 km/h in sec. 7,2
Acceleration from 0-100 km/h in sec. 9,9
Urban cycle 14,5/348
Extra urban cycle 8,2/198
Combined 10,5/252
Technical Data270
5 RONb)
alhambra_ingles_0708 Seite 270 Mittwoch, 10. September 2008 10:55 10
Weights
Trailer weights
Engine oil capacity
Petrol engine 2.8l VR6 150 kW (204 bhp) Automatic
General engine data
Gross vehicle weight in kg 2470
Weight in working order (with driver) in kg 1694/2014
Gross axle weight, front in kg 1240
Gross axle weight, rear in kg 1280
Permitted roof load in kg 75
With no brakes, gradients up to 12% 700
With brakes, gradients up to 12% 2000
Approximate engine oil capacity with oil filter change 5.5 litres
Power output in kW (bhp) rpm 150 (204)/6200
Maximum torque in Nm at rpm 265/3400
No. of cylinders, capacity in cm 3 6/ 2792
Compression 10,75 0,25
Fuel Super 98 RONa)/Super 9
a) Research-Octane-Number = Measure of the predetonation power of the petrol. b) With a slight power loss
Technical Data 271
Safety Fir Technical Data
1727/2025
alhambra_ingles_0708 Seite 271 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Performance figures
Consumption (litres/100 km)/ CO2 (g/km)
Weights
Trailer weights
Engine oil capacity
Maximum speed in km/h 217
Acceleration from 0-80 km/h in sec. 7,4
Acceleration from 0-100 km/h in sec. 10,4
Urban cycle 16,2/388
Extra urban cycle 8,6/207
Combined 11,4/274
Gross vehicle weight in kg 2500
Weight in working order (with driver) in kg 1727/2020
Gross axle weight, front in kg 1240
Gross axle weight, rear in kg 1280
Permitted roof load in kg 75
With no brakes, gradients up to 12% 700
With brakes, gradients up to 12% 2000
Approximate engine oil capacity with oil filter change 5.5 litres
Technical Data272
5 RONb)
alhambra_ingles_0708 Seite 272 Mittwoch, 10. September 2008 10:55 10
Petrol engine 2.8l VR6150 kW (204 bhp) 6 gear four-wheel drive
General engine data
Performance figures
Consumption (litres/100 km)/ CO2 (g/km)
Power output in kW (bhp) rpm 150 (204)/6200
Maximum torque in Nm at rpm 265/3400
No. of cylinders, capacity in cm 3 6/ 2792
Compression 10,75 0,25
Fuel Super 98 RONa)/Super 9
a) Research-Octane-Number = Measure of the predetonation power of the petrol. b) With a slight power loss
Maximum speed in km/h 214
Acceleration from 0-80 km/h in sec. 7,4
Acceleration from 0-100 km/h in sec. 10,3
Urban cycle 14,9/357
Extra urban cycle 8,7/210
Combined 11,0/265
Technical Data 273
Safety Fir Technical Data
1786/2084
iodiesel 5 % as in EN 14214
alhambra_ingles_0708 Seite 273 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Weights
Trailer weights
Engine oil capacity
Diesel engine 1.9l TDI 85 kW (115 bhp) 6 gears four-wheel drive
General engine data
Gross vehicle weight in kg 2510
Weight in working order (with driver) in kg 1786/2047
Gross axle weight, front in kg 1240
Gross axle weight, rear in kg 1330
Permitted roof load in kg 75
With no brakes, gradients up to 12% 700
With brakes, gradients up to 12% 2000
Approximate engine oil capacity with oil filter change 5.5 litres
Power output in kW (bhp) rpm 85 (115)/ 4000
Maximum torque in Nm at rpm 310/1900
No. of cylinders, capacity in cm 3 4/1896
Compression 18
Fuel Petrol min. 51 CNa) or B
a) Cetane-Number (cetane index) = Measure of the combustion power of the diesel.
Technical Data274
alhambra_ingles_0708 Seite 274 Mittwoch, 10. September 2008 10:55 10
Performance figures
Consumption (litres/100 km)/ CO2 (g/km)
Weights
Trailer weights
Engine oil capacity
Maximum speed in km/h 178
Acceleration from 0-80 km/h in sec. 9,3
Acceleration from 0-100 km/h in sec. 14,7
Urban cycle 9,1/240
Extra urban cycle 5,9/156
Combined 7,1/188
Gross vehicle weight in kg 2510
Weight in working order (with driver) in kg 1784
Gross axle weight, front in kg 1260
Gross axle weight, rear in kg 1330
Permitted roof load in kg 75
With no brakes, gradients up to 12% 700
With brakes, gradients up to 12% 2000
Approximate engine oil capacity with oil filter change 4.3 litres
Technical Data 275
Safety Fir Technical Data
iodiesel 5 % as in EN 14214
alhambra_ingles_0708 Seite 275 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Diesel engine 1.9l TDI 85 kW (115 bhp) 6 gears
General engine data
Performance figures
Consumption (litres/100 km)/ CO2 (g/km)
Power output in kW (bhp) rpm 85 (115)/ 4000
Maximum torque in Nm at rpm 310/1900
No. of cylinders, capacity in cm 3 4/1896
Compression 18 0,5
Fuel Petrol min. 51 CNa) or B
a) Cetane-Number (cetane index) = Measure of the combustion power of the diesel.
Maximum speed in km/h 181
Acceleration from 0-80 km/h in sec. 9,1
Acceleration from 0-100 km/h in sec. 13,7
Urban cycle 8,0/211
Extra urban cycle 5,6/148
Combined 6,5/172
Technical Data276
odiesel 5 % as in EN 14214
alhambra_ingles_0708 Seite 276 Mittwoch, 10. September 2008 10:55 10
Weights
Trailer weights
Engine oil capacity
Diesel engine 1.9 TDI 85 kW (115 bhp). Automatic
General engine data
Gross vehicle weight in kg 2510
Weight in working order (with driver) in kg 1724/ 2003
Gross axle weight, front in kg 1240
Gross axle weight, rear in kg 1280
Permitted roof load in kg 75
With no brakes, gradients up to 12% 700
With brakes, gradients up to 12% 2000
Approximate engine oil capacity with oil filter change 4.3 litres
Power output in kW (bhp) rpm 85 (115)/ 4000
Maximum torque in Nm at rpm 310/1900
No. of cylinders, capacity in cm 3 4/1896
Compression 18 0,5
Fuel Petrol min. 51 CNa) or Bi
a) Cetane-Number (cetane index) = Measure of the combustion power of the diesel.
Technical Data 277
Safety Fir Technical Data
1757/2020
alhambra_ingles_0708 Seite 277 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Performance figures
Consumption (litres/100 km)/ CO2 (g/km)
Weights
Trailer weights
Engine oil capacity
Maximum speed in km/h 177
Acceleration from 0-80 km/h in sec. 9,9
Acceleration from 0-100 km/h in sec. 15,1
Urban cycle 10,0,0/264
Extra urban cycle 5,9/156
Combined 7,4/196
Gross vehicle weight in kg 2510
Weight in working order (with driver) in kg 1757/2032
Gross axle weight, front in kg 1240
Gross axle weight, rear in kg 1280
Permitted roof load in kg 75
With no brakes, gradients up to 12% 700
With brakes, gradients up to 12% 2000
Approximate engine oil capacity with oil filter change 4.3 litres
Technical Data278
225
151
177
alhambra_ingles_0708 Seite 278 Mittwoch, 10. September 2008 10:55 10
Diesel engine 2.0l TDI 103 kW (140 bhp) 6 gears
General engine data
Performance figures
Consumption (litres/100 km)/ CO2 (g/km) without DPF 46)
Power output in kW (bhp) rpm 103(140)/ 4000
Maximum torque in Nm at rpm 310/1900-2500
No. of cylinders, capacity in cm 3 4/1968
Compression 18,5 0,5
Fuel Petrol min. 51 CNa)
a) Cetane-Number (cetane index) = Measure of the combustion power of the diesel.
Maximum speed in km/h 192
Acceleration from 0-80 km/h in sec. 8,5
Acceleration from 0-100 km/h in sec. 12,2
46) Diesel particulate filters
Urban cycle 8,3/219 8,5/
Extra urban cycle 5,7/151 5,7/
Combined 6,6/175 6,7/
Technical Data 279
Safety Fir Technical Data
alhambra_ingles_0708 Seite 279 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Weights
Trailer weights
Engine oil capacity
Diesel engine 2.0 TDI 103 kW (140 bhp) 6 gears. Ecomotive
Engine specifications
Gross vehicle weight in kg 2510
Weight in working order (with driver) in kg 1740/2024
Gross axle weight, front in kg 1240
Gross axle weight, rear in kg 1280
Permitted roof load in kg 75
With no brakes, gradients up to 12% 700
With brakes, gradients up to 12% 2000
Approximate engine oil capacity with oil filter change 4.3 litres
Power output in kW (bhp) rpm 103(140)/ 4000
Maximum torque in Nm at rpm 310/1900-2500
No. of cylinders, capacity in cm 3 4/1968
Compression 18,5 0,5
Fuel Petrol min. 51 CNa)
a) Cetane-Number (cetane index) = Measure of the diesel combustion power.
Technical Data280
alhambra_ingles_0708 Seite 280 Mittwoch, 10. September 2008 10:55 10
Performance figures
Consumption (litres/100 km)/ CO2 (g/km)
Weights
Trailer weights
Engine oil capacity
Maximum speed in km/h 195
Acceleration from 0-80 km/h in sec. 8.2
Acceleration from 0-100 km/h in sec. 11.9
Urban cycle 7,8/206
Extra urban cycle 4,9/130
Combined 6/159
Gross vehicle weight in kg 2510
Weight in working order (with driver) in kg 1740
Front gross axle weight in kg 1240
Rear gross axle weight in kg 1280
Permitted roof load in kg 75
Trailer without brakes, gradients up to 12% 700
Trailer with brakes, gradients up to 12% 2000
Approximate engine oil capacity with oil filter change 4.3 litres
Technical Data 281
Safety Fir Technical Data
m 1,810 mm/ 1,816 mm
m
Rear
1,518 mm
1,506 mm
alhambra_ingles_0708 Seite 281 Mittwoch, 10. September 2008 10:55 10
st Operating instructions Tips and Maintenance
Dimensions and capacities
Dimensions
Length, width 4,634 mm/ 4,739 m
Height at kerb weight 1,707 mm/ 1,820 m
Front and rear projection 892 mm/ 907 mm
Wheelbase 2,835 mm
Turning circle 11.93 m
Track widtha)
a) This data will change depending on the type of wheel rim.
Front
1,532 mm
1,520 mm
Capacities
Fuel tank 70 l. Reserve 8 l.
Windscreen washer fluid container with headlight washer 3.5 l/ 6 l
Tyre pressure
Summer-grade tyres:
The correct tyre pressure can be seen on the sticker on the inside of the tank flap.
Winter tyres:
The pressure of these tyres is the same as the summer tyre pressure plus 0.2 bar.
alhambra_ingles_0708 Seite 282 Mittwoch, 10. September 2008 10:55 10
Index 283
trays
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
omatic belt retractor . . . . . . . . . . . . . . . . . . . 22
omatic car washes . . . . . . . . . . . . . . . . . . . . 194
omatic gearbox . . . . . . . . . . . . . . . . . . . . . . 167
Safety interlock for ignition key . . . . . . . . . 163
omatic gearbox with Tiptronic . . . . . . . . . . 172
omatic mode
Climatronic . . . . . . . . . . . . . . . . . . . . . . . . . . 153
omatic wipe
Windscreen wiper and washer . . . . . . . . . . 116
matic wipe
Rear window wiper and wash . . . . . . . . . . . 117
-IN Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
l coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
tery
Changing . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Winter conditions . . . . . . . . . . . . . . . . . . . . 223
height adjustment . . . . . . . . . . . . . . . . . 26, 29
t retainer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
tension device
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
alhambra_ingles_0708 Seite 283 Mittwoch, 10. September 2008 10:55 10
Index
4MOTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
A ABS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 74
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 181
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Acoustic signal . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Acoustic warning . . . . . . . . . . . . . . . . . . . . . . . . 162
Additional instruction manual
Roof carrier . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Adjust seats
rear seats . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Adjusting lumbar support . . . . . . . . . . . . . . . . . 124
Air conditioning manual
faults in operation . . . . . . . . . . . . . . . . . . . . 158
Air conditioning system
Climatronic . . . . . . . . . . . . . . . . . . . . . . . . . . 152
General notes . . . . . . . . . . . . . . . . . . . . . . . . 158
Air recirculation mode
Climatronic . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Airbag cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Airbag covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Airbag system . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Curtain airbags . . . . . . . . . . . . . . . . . . . . . . . 41
Front airbags . . . . . . . . . . . . . . . . . . . . . . . . . 36
Side airbags . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 33
Airbags
Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Alarm system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Switching off . . . . . . . . . . . . . . . . . . . . . . . . . 96
Alterations to the vehicle . . . . . . . . . . . . . . . . . 202
Alternator
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 76
Anti-freeze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Anti-lock brake system
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 74
Anti-locking brake system . . . . . . . . . . . . . . . . 180
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 181
Anti-puncture kit . . . . . . . . . . . . . . . . . . . . . . . . 234
Sealing and inflating tyres . . . . . . . . . . . . . 235
Anti-theft alarm system . . . . . . . . . . . . . . . . . . . . 96
Switching off . . . . . . . . . . . . . . . . . . . . . . . . . 96
Anti-theft wheel bolts . . . . . . . . . . . . . . . . . . . . 238
Aquaplaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 227
Armrest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Ash
Aut
Aut
Aut
Aut
Aut
Aut
auto
AUX
B Bal
BAS
Bat
Belt
Bel
Belt
Index284
king engine oil level . . . . . . . . . . . . . . . . . 214
safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
ategorisation in groups . . . . . . . . . . . . . . . 47
roup 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
roup 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
roup 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
roups 0 and 0+ . . . . . . . . . . . . . . . . . . . . . . 47
n front passenger seat . . . . . . . . . . . . . . . . . 33
afety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 45
ecuring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
proof locks . . . . . . . . . . . . . . . . . . . . . . . . . 93
rette lighter . . . . . . . . . . . . . . . . . . . . . . . . 140
ning alloy wheels . . . . . . . . . . . . . . . . . . . . 197
ning and caring for your vehicle . . . . . . . . 193
ning chrome . . . . . . . . . . . . . . . . . . . . . . . . 197
ning cloth seat covers . . . . . . . . . . . . . . . . 199
ning dash panel . . . . . . . . . . . . . . . . . . . . . 199
ning engine compartment . . . . . . . . . . . . . 198
ning fabric trim . . . . . . . . . . . . . . . . . . . . . 199
ning leather . . . . . . . . . . . . . . . . . . . . . . . . 200
ning plastic parts . . . . . . . . . . . . . . . . . . . . 199
ning seat belts . . . . . . . . . . . . . . . . . . . . . . 200
ning windows . . . . . . . . . . . . . . . . . . . . . . . 196
ning wooden trim . . . . . . . . . . . . . . . . . . . . 199
atronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
ir outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
ontrols . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
aults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
alhambra_ingles_0708 Seite 284 Mittwoch, 10. September 2008 10:55 10
Belt tension devices . . . . . . . . . . . . . . . . . . . . . . 30
Belt tensioner
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 33
Biodiesel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Bonnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Brake assist system . . . . . . . . . . . . . . . . . . . . . 180
Brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
Changing . . . . . . . . . . . . . . . . . . . . . . . . . . . 222
Brake pad wear
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . 179
Brake pad wear indicator*
Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Brake pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Brake servo . . . . . . . . . . . . . . . . . . . . . . . . 179, 185
Brake system . . . . . . . . . . . . . . . . . . . . . . . . . . . 221
brake servo . . . . . . . . . . . . . . . . . . . . . . . . . 179
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 76
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 179
Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179, 185
Braking distance . . . . . . . . . . . . . . . . . . . . . . . . 185
Breakdown set
storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Bulb change . . . . . . . . . . . . . . . . . . . . . . . . . . . 245
Bulb defect
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 76
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
C Car care
Exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Car care products . . . . . . . . . . . . . . . . . . . . . . . 193
Car phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Car washes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
Catalytic converter . . . . . . . . . . . . . . . . . . . . . . 186
CCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
CD changer
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Central locking . . . . . . . . . . . . . . . . . . . . . . . . . . 88
individual opening of doors . . . . . . . . . . . . . 89
Central locking button . . . . . . . . . . . . . . . . . . . . 91
Central stowage on instrument panel . . . . . . . 133
Cetane number . . . . . . . . . . . . . . . . . . . . . . . . . 207
Changing a light . . . . . . . . . . . . . . . . . . . . . . . . 245
Changing a wheel . . . . . . . . . . . . . . . . . . . 236, 240
Changing brake pads . . . . . . . . . . . . . . . . . . . . 185
Changing bulbs
lights on tailgate/rear door . . . . . . . . . . . . 247
Lights on vehicle body . . . . . . . . . . . . . . . . 246
Reading light . . . . . . . . . . . . . . . . . . . . . . . . 249
Registration plate light . . . . . . . . . . . . . . . . 247
Changing gear
See Manual gearbox . . . . . . . . . . . . . . . . . . 166
Changing the bulbs
interior light . . . . . . . . . . . . . . . . . . . . . . . . . 248
rear lights . . . . . . . . . . . . . . . . . . . . . . . . . . 246
Changing the lamps
Side indicator lights . . . . . . . . . . . . . . . . . . 245
Chassis number . . . . . . . . . . . . . . . . . . . . . . . . 258
Checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224
Checking battery electrolyte level . . . . . . . . . . 224
Chec
Child
Child
C
G
G
G
G
i
S
s
Child
Ciga
Clea
Clea
Clea
Clea
Clea
Clea
Clea
Clea
Clea
Clea
Clea
Clea
Clim
A
C
f
Index 285
lay
Instrument panel . . . . . . . . . . . . . . . . . . . . . . 67
r lock cylinders . . . . . . . . . . . . . . . . . . . . . . 197
r open display
warning light . . . . . . . . . . . . . . . . . . . . . . . . . 77
r release lever . . . . . . . . . . . . . . . . . . . . . 61, 92
k holders . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
ing
Driving abroad . . . . . . . . . . . . . . . . . . . . . . . 189
Economically / With Respect for the
Environment . . . . . . . . . . . . . . . . . . . . . . . 187
With a trailer . . . . . . . . . . . . . . . . . . . 190, 192
With four-wheel drive . . . . . . . . . . . . . . . . . 184
ing abroad . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . 189
ing safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
licate keys . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
t filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
amic headlight range control . . . . . . 109, 110
nomical driving . . . . . . . . . . . . . . . . . . . . . . 187
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 181
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 74
tric consumers . . . . . . . . . . . . . . . . . 114, 149
alhambra_ingles_0708 Seite 285 Mittwoch, 10. September 2008 10:55 10
General notes . . . . . . . . . . . . . . . . . . . . . . . . 158
Second cooling system . . . . . . . . . . . . . . . . 156
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Coat hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Cockpit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Code number . . . . . . . . . . . . . . . . . . . . . . . . . . . 232
Coming Home function . . . . . . . . . . . . . . . . . . . 109
Control lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Controls
Electric windows . . . . . . . . . . . . . . . . . . . . . 101
Convenience closing
Sliding/tilting roof . . . . . . . . . . . . . . . . . . . . 105
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Convenience opening
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Cool box
cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . 216, 217
Coolant Level . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Coolant level
warning light . . . . . . . . . . . . . . . . . . . . . . . . . 78
Coolant Loss . . . . . . . . . . . . . . . . . . . . . . . . . . . 217
Coolant temperature
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Safety instructions . . . . . . . . . . . . . . . . . . . . . 78
Cooling and heating box
Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Notes on usage . . . . . . . . . . . . . . . . . . . . . . 149
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . 151
Switching off . . . . . . . . . . . . . . . . . . . . . . . . 150
Correct adjustment of front head restraints . . . . 12
Cruise control system . . . . . . . . . . . . . . . . . . . . 176
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 73
Cup holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Curtain airbags . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 42
D Daylight driving lights . . . . . . . . . . . . . . . . . . . . 108
Deadlock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Diagram of gears . . . . . . . . . . . . . . . . . . . . . . . . 166
Diesel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Diesel engine
Winter driving . . . . . . . . . . . . . . . . . . . . . . . 208
Diesel engine particulate filter* . . . . . . . . . . . . 187
Diesel particulate filter
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 75
Differential lock fault (EDL)
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 75
Dipped headlights . . . . . . . . . . . . . . . . . . . . . . . 108
Disabling airbag
front passenger airbag . . . . . . . . . . . . . . . . . 43
Disabling front and side passenger airbag
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Disabling frontal airbag . . . . . . . . . . . . . . . . . . . 43
Disp
Doo
Doo
Doo
Drin
Driv
Driv
Driv
Dup
Dus
Dyn
E Eco
EDL
EDS
Elec
Index286
brake
arning lamp . . . . . . . . . . . . . . . . . . . . . . . . 73
-wheel drive . . . . . . . . . . . . . . . . . . . . . . . . 184
eplacing tyres . . . . . . . . . . . . . . . . . . . . . . 184
now chains . . . . . . . . . . . . . . . . . . . . . . . . 184
inter tyres . . . . . . . . . . . . . . . . . . . . . . . . . 184
t airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
escription . . . . . . . . . . . . . . . . . . . . . . . . . . 36
unction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
afety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 38
t passenger airbags . . . . . . . . . . . . . . . . . . . 43
t seats
djusting . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
eating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
afety instructions . . . . . . . . . . . . . . . . . . . 131
iesel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
etrol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
level
isplay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
reserve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
ee also Fuel reserve . . . . . . . . . . . . . . . . . . 76
tank cap . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
: save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
alhambra_ingles_0708 Seite 286 Mittwoch, 10. September 2008 10:55 10
Electric windows
controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
one-touch closing and opening . . . . . . . . . 102
roll-back function . . . . . . . . . . . . . . . . . . . . 103
Electrical accessories . . . . . . . . . . . . . . . . . . . . 141
Electrical windows . . . . . . . . . . . . . . . . . . . . . . 101
Electronic differential lock . . . . . . . . . . . . . . . . 182
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 74
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 181
Electronic immobiliser . . . . . . . . . . . . . . . . . . . 163
Electronic stabilisation program . . . . . . . . . . . 182
Electronic stabilisation programme . . . . . . . . . . 74
Description . . . . . . . . . . . . . . . . . . . . . . . . . 161
warning lamp . . . . . . . . . . . . . . . . . . . . 162, 183
Electronic stabilisation programme (ESP)
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 74
Emergency opening
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Engine
Running in . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Engine compartment
Working in the engine compartment . . . . . 209
Engine coolant . . . . . . . . . . . . . . . . . . . . . . . . . 216
Engine fault
indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Engine hood
See Bonnet . . . . . . . . . . . . . . . . . . . . . . . . . 211
Engine management
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 73
Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Changing . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Checking level . . . . . . . . . . . . . . . . . . . . . . . 214
Oil properties . . . . . . . . . . . . . . . . . . . . . . . . 213
Specifications . . . . . . . . . . . . . . . . . . . . . . . 212
Topping up . . . . . . . . . . . . . . . . . . . . . . . . . 215
Engine oil dipstick . . . . . . . . . . . . . . . . . . . . . . 214
Engine oil pressure
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 77
Engine oil temperature display . . . . . . . . . . . . . 65
Engine oil temperature gauge . . . . . . . . . . . . . . 62
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
Environmental friendliness . . . . . . . . . . . . 189
Environmentally friendly driving . . . . . . . . . . . 187
ESP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74, 182
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 183
Exhaust gas indicator . . . . . . . . . . . . . . . . . . . . . 74
Exterior mirrors . . . . . . . . . . . . . . . . . . . . . 119, 196
External aerial . . . . . . . . . . . . . . . . . . . . . . . . . . 203
F Fastening rings . . . . . . . . . . . . . . . . . . . . . . 15, 144
Fastening seat belt . . . . . . . . . . . . . . . . . . . . . . . 22
Fault in the exhaust system* . . . . . . . . . . . . . . . 74
Fault messages . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Faults in operation of air conditioning . . . . . . 158
First-aid kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Floor mats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Fog lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Foot
W
Four
R
S
W
Fron
D
F
S
Fron
Fron
a
h
s
Fuel
D
P
Fuel
D
Fuel
Fuel
S
Fuel
Fuel
Fuse
Fuse
G G 12
Index 287
p leads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
p-starting . . . . . . . . . . . . . . . . . . . . . . . . . . . 249
tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
with remote control . . . . . . . . . . . . . . . . . . . 94
buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
-down function . . . . . . . . . . . . . . . . . . . . . . 172
ng platform . . . . . . . . . . . . . . . . . . . . . . . . . 255
ng the vehicle . . . . . . . . . . . . . . . . . . . . . . . 255
ting of controls . . . . . . . . . . . . . . . . . . . . . . . 61
ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
d compartment
See Luggage compartment . . . . . . . . . . . . . . 14
ding area
See Luggage compartment . . . . . . . . . . . . . 143
ks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
gage compartment . . . . . . . . . . . . . . . . 14, 143
See also Luggage compartment . . . . . . 14, 143
gage compartment cover . . . . . . . . . . . . . . 146
n beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
n beam headlights
Indicator lamp . . . . . . . . . . . . . . . . . . . . . . . . 73
alhambra_ingles_0708 Seite 287 Mittwoch, 10. September 2008 10:55 10
Gear selector lever
See Automatic gearbox . . . . . . . . . . . . . . . . 170
See Automatic gearbox with Tiptronic . . . . 172
General overview of the engine compartment . 262
Glove compartment . . . . . . . . . . . . . . . . . . . . . . 133
Glove compartment light . . . . . . . . . . . . . . . . . . 113
Glow plug system . . . . . . . . . . . . . . . . . . . . . . . 165
Guide lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
H Hand brake
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 179
Handbrake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Warning lamp . . . . . . . . . . . . . . . . . . . . 76, 173
Hazard warning lights . . . . . . . . . . . . . . . . . . . . 110
head restraints
Adjusting . . . . . . . . . . . . . . . . . . . . . . 122, 123
fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Removing . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Headlamp washer . . . . . . . . . . . . . . . . . . . . . . . 118
Headlight flasher . . . . . . . . . . . . . . . . . . . . . . . . 112
Headlight range control . . . . . . . . . . . . . . . . . . 109
Headlights
Driving abroad . . . . . . . . . . . . . . . . . . . . . . . 189
Heated rear window
Heating elements . . . . . . . . . . . . . . . . . . . . 144
High pressure cleaners . . . . . . . . . . . . . . . . . . . 195
Hubcaps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
I Identification number . . . . . . . . . . . . . . . . . . . . 258
Ignition key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Ignition lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Illumination of instruments and switches . . . . 109
Indicator lights
indication lamp . . . . . . . . . . . . . . . . . . . . . . . 73
Individual opening of doors . . . . . . . . . . . . . . . . 89
Information messages . . . . . . . . . . . . . . . . . . . . 67
Instrument lighting control . . . . . . . . . . . . . . . . . 61
Instrument panel . . . . . . . . . . . . . . . . . . . . . . . . . 61
Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Integrated child seat . . . . . . . . . . . . . . . . . . . . . . 52
Adjusting belt routing . . . . . . . . . . . . . . . . . . 53
Cleaning the child seat . . . . . . . . . . . . . . . . . 57
Fastening harness belt . . . . . . . . . . . . . . . . . 54
Group 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Group 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Group 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Releasing harness belt . . . . . . . . . . . . . . . . . 55
Interior light . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Interior lights . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Interior monitoring system . . . . . . . . . . . . . . . . . 97
Intermittent wipe
rear window wiper . . . . . . . . . . . . . . . . . . . . 117
windscreen wiper . . . . . . . . . . . . . . . . . . . . . 116
J Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Jum
Jum
K Key
Key
Key
Kick
L Lifti
Lifti
Ligh
Ligh
Loa
Loa
Loc
Lug
Lug
M Mai
Mai
Index288
ing the vehicle with the vehicle tool kit jack . .
239
ing lights . . . . . . . . . . . . . . . . . . . . . . . . . . 113
door
riving with the tailgate open . . . . . . . . . . . 99
fog light . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
arning lamp . . . . . . . . . . . . . . . . . . . . . . . . 73
arning light . . . . . . . . . . . . . . . . . . . . . . . . 108
seats
haracteristics of seat equipment . . . . . . . 126
oving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
afety instructions . . . . . . . . . . . . . . . . . . . 131
window heating . . . . . . . . . . . . . . . . . . . . 115
eating element wires . . . . . . . . . . . . . . . . 197
window wiper . . . . . . . . . . . . . . . . . . . . . . 117
-view mirror . . . . . . . . . . . . . . . . . . . . . . . . 118
ling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
ote control key
eplacing the battery . . . . . . . . . . . . . . . . . . 95
ynchronising . . . . . . . . . . . . . . . . . . . . . . . . 95
irs
irbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
acement keys . . . . . . . . . . . . . . . . . . . . . . . . 87
acing the battery
emote control key . . . . . . . . . . . . . . . . . . . . 95
acing tyres
our-wheel drive . . . . . . . . . . . . . . . . . . . . . 184
ctor
ee Automatic belt retractor . . . . . . . . . . . . . 22
alhambra_ingles_0708 Seite 288 Mittwoch, 10. September 2008 10:55 10
Manual gearbox . . . . . . . . . . . . . . . . . . . . . . . . 166
Manual mode
Climatronic . . . . . . . . . . . . . . . . . . . . . . . . . 154
Mileage display . . . . . . . . . . . . . . . . . . . . . . . 65, 66
Mirrors
Exterior mirrors . . . . . . . . . . . . . . . . . . . . . . 119
Interior mirror . . . . . . . . . . . . . . . . . . . . . . . 118
Make-up mirrors . . . . . . . . . . . . . . . . . . . . . 114
Mobile phone . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Modifications . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Multifunction steering wheel . . . . . . . . . . . . . . . 84
N Navigation system* . . . . . . . . . . . . . . . . . . . . . . . 83
Net bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Number of seats . . . . . . . . . . . . . . . . . . . . . . . . . 17
O Observations . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
Octane number . . . . . . . . . . . . . . . . . . . . . . . . . 207
Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
Oil change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215
Oil properties . . . . . . . . . . . . . . . . . . . . . . . . . . . 213
On board computer with multifunction display*
Check working . . . . . . . . . . . . . . . . . . . . . . . . 79
Message on display . . . . . . . . . . . . . . . . . . . 79
One-touch closing and opening
electric windows . . . . . . . . . . . . . . . . . . . . . 102
Overview
Control lamps . . . . . . . . . . . . . . . . . . . . . . . . 70
Instrument panel . . . . . . . . . . . . . . . . . . . . . . 61
Instruments . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Multifunction steering wheel . . . . . . . . . . . . 84
Warning lamps . . . . . . . . . . . . . . . . . . . . . . . 70
P Paintwork
Polishing . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Waxing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195
Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
Parking aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
Parking distance warning system . . . . . . . . . . 174
Parking lights . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
Parts replacement . . . . . . . . . . . . . . . . . . . . . . . 202
Passenger compartment
Climatronic . . . . . . . . . . . . . . . . . . . . . . . . . 156
Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Petrol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207
Trips to foreign countries . . . . . . . . . . . . . . 189
Physical principles of a frontal collision . . . . . . 19
Plastic key tab . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Plastic parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Pollution filter . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Power steering . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Preheating system
indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
R Rais
Read
Rear
d
Rear
W
w
Rear
c
m
s
Rear
H
Rear
Rear
Refil
Rem
R
S
Repa
A
Repl
Repl
R
Repl
F
Retra
S
Index 289
ts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Folding backrest forwards . . . . . . . . . . . . . 128
Lifting seat . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Removing and fitting . . . . . . . . . . . . . . . . . . 129
uring load . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
ctor lever lock . . . . . . . . . . . . . . . . . . . . . . . 168
vice interval display . . . . . . . . . . . . . . . . . . . . 66
es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
e airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 40
e lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
ing position
Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front passenger . . . . . . . . . . . . . . . . . . . . . . . 10
Incorrect sitting position . . . . . . . . . . . . . . . . 13
Passengers . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ing position, occupants . . . . . . . . . . . . . . . . . . 9
ing/tilting sun roof . . . . . . . . . . . . . . . . . . . 104
w chains . . . . . . . . . . . . . . . . . . . . . . . 230, 261
Four-wheel drive . . . . . . . . . . . . . . . . . . . . . 184
kets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
re wheel
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
edometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
rting
a petrol engine . . . . . . . . . . . . . . . . . . . . . . . 164
alhambra_ingles_0708 Seite 289 Mittwoch, 10. September 2008 10:55 10
Retrofitting a towing bracket . . . . . . . . . . . . . . 204
Rev counter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Reverse gear
Automatic gearbox . . . . . . . . . . . . . . . . . . . 170
Manual gearbox . . . . . . . . . . . . . . . . . . . . . . 166
Risk of front passenger seat airbag for a rear facing
child seat . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
RME fuel (biodiesel) . . . . . . . . . . . . . . . . . . . . . 207
Roll-back function
Sliding/tilting roof . . . . . . . . . . . . . . . . . . . . 106
windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Roof aerial* . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203
Roof carrier . . . . . . . . . . . . . . . . . . . . . . . . 148, 149
saving fuel . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Roof load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Rubber seals . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Running in
Brake pads . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
Running in tyres . . . . . . . . . . . . . . . . . . . . . . . . . 185
S Safe driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Safety equipment . . . . . . . . . . . . . . . . . . . . . . . . . 7
Safety instructions
Coolant temperature . . . . . . . . . . . . . . . . . . . 78
Safety notes
Belt tension devices . . . . . . . . . . . . . . . . . . . 30
Curtain airbags . . . . . . . . . . . . . . . . . . . . . . . 42
Disabling front and side passenger airbag . 44
Front airbags . . . . . . . . . . . . . . . . . . . . . . . . . 38
Side airbags . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Using child seats . . . . . . . . . . . . . . . . . . . . . . 45
Using seat belts . . . . . . . . . . . . . . . . . . . . . . . 21
Saving fuel
roof carrier . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Sealant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Seat adjustment . . . . . . . . . . . . . . . . . . . . . . . . 121
Front seats . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Seat belt position
Pregnant women . . . . . . . . . . . . . . . . . . . . . . 25
Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Seat belt warning lamp . . . . . . . . . . . . . . . . . . . . 17
Seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Detachable . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Incorrectly fastened . . . . . . . . . . . . . . . . . . . . 30
Not worn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
one buckle . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 17
With two buckles . . . . . . . . . . . . . . . . . . . . . . 23
Seat belts protect . . . . . . . . . . . . . . . . . . . . . . . . 21
Seat heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Seat layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
Sea
Sec
Sele
Ser
Sho
Sid
Sid
Sitt
Sitt
Slid
Sno
Soc
Spa
Spe
Sta
Index290
signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
arning lamp . . . . . . . . . . . . . . . . . . . . 73, 112
way radio . . . . . . . . . . . . . . . . . . . . . . . . . . 203
plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 226
pressures . . . . . . . . . . . . . . . . . . . . . . . . . . 260
and wheels
imensions . . . . . . . . . . . . . . . . . . . . . . . . . 227
service life . . . . . . . . . . . . . . . . . . . . . . . . 226
tread depth . . . . . . . . . . . . . . . . . . . . . . . 227
with directional tread pattern . . . . . . . . . 225
rbody sealant . . . . . . . . . . . . . . . . . . . . . . 198
stening seat belt
with one buckle) . . . . . . . . . . . . . . . . . . . . . 26
stening seat belts
with two buckles) . . . . . . . . . . . . . . . . . . . . . 27
r right stowage on instrument panel . . . 134
cle
ifting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
cle battery . . . . . . . . . . . . . . . . . . . . . . . . . 223
cle data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 258
cle identification data . . . . . . . . . . . . . . . . 258
cle identification number . . . . . . . . . . . . . 258
cle paint
ar care products . . . . . . . . . . . . . . . . . . . . 193
alhambra_ingles_0708 Seite 290 Mittwoch, 10. September 2008 10:55 10
Starting the engine
after the fuel tank has been run dry . . . . . . 165
With the ignition key . . . . . . . . . . . . . . . . . . 164
Steam cleaners . . . . . . . . . . . . . . . . . . . . . . . . . 195
Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Steering lock . . . . . . . . . . . . . . . . . . . . . . . . 162
Steering wheel controls . . . . . . . . . . . . . . . . . . . 84
Steering wheel height adjustment . . . . . . . . . . 160
Stowage
Other stowage areas . . . . . . . . . . . . . . . . . . 135
Stowage compartment
Front passenger side . . . . . . . . . . . . . . . . . 133
Sun visor
front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Sunroof blind
Sliding/tilting roof . . . . . . . . . . . . . . . . . . . 105
Switches
Exterior mirrors . . . . . . . . . . . . . . . . . . . . . . 119
Hazard warning lights . . . . . . . . . . . . . . . . . 110
lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Sliding/tilting roof . . . . . . . . . . . . . . . . . . . 104
Switching off the engine
With the ignition key . . . . . . . . . . . . . . . . . . 165
T Tailgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Closing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Convenience opening . . . . . . . . . . . . . . . . . . 98
Opening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
safety instructions . . . . . . . . . . . . . . . . . . . . 100
Tailgate open display*
warning light . . . . . . . . . . . . . . . . . . . . . . . . . 77
Tank
Fuel level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Tank capacity . . . . . . . . . . . . . . . . . . . . . . . . . 64
Tank capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
TCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
TCS (Traction control system)
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . 74
The danger of not using the seat belt . . . . . . . . 20
Thermos box
cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201
Tightening torque of wheel bolts . . . . . . . . . . . 261
Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Towing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
Towing a trailer . . . . . . . . . . . . . . . . . . . . . 190, 260
Towing bracket . . . . . . . . . . . . . . . . . . . . . . . . . 191
storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Towing eye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252
Towline anchorage
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253
Tow-starting . . . . . . . . . . . . . . . . . . . . . . . . 252, 253
Traction control system . . . . . . . . . . . . . . . . . . 183
warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 74
Trailer turn signals
Indicator lamps . . . . . . . . . . . . . . . . . . . . . . . 72
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . 112
Trailer weights . . . . . . . . . . . . . . . . . . . . . . . . . . 260
Trips, checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Turn
W
Two-
Type
Tyre
Tyre
Tyres
D
Tyres
Tyres
Tyres
U Unde
Unfa
(
Unfa
(
Uppe
V Vehi
L
Vehi
Vehi
Vehi
Vehi
Vehi
C
Index 291
alhambra_ingles_0708 Seite 291 Mittwoch, 10. September 2008 10:55 10
Vehicle tool kit jack . . . . . . . . . . . . . . . . . . . . . . 239
Vehicle tools . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
Vehicle wallet storage . . . . . . . . . . . . . . . . . . . . 133
Ventilation slits . . . . . . . . . . . . . . . . . . . . . 15, 144
Voltmeter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
W Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
warning lamp
diesel particulate filter . . . . . . . . . . . . . . . . . 75
ESP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
exhaust gas indicator . . . . . . . . . . . . . . . . . . 74
Warning lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Warning messages . . . . . . . . . . . . . . . . . . . . . . . 67
Warning triangle . . . . . . . . . . . . . . . . . . . . . . . . 143
Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Washer fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218
Washing by hand . . . . . . . . . . . . . . . . . . . . . . . . 194
Washing the vehicle . . . . . . . . . . . . . . . . . . . . . 194
Washing with high pressure cleaners . . . . . . . 195
Water in the windscreen washer tank . . . . . . . 218
Wear indicators . . . . . . . . . . . . . . . . . . . . . . . . . 227
Wheel bolt caps . . . . . . . . . . . . . . . . . . . . . . . . . 237
Wheel bolts . . . . . . . . . . . . . . . . . . . . . . . 238, 261
Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . 225, 260
Why assume the correct sitting position? . . . . . 32
Why should head restraints be correctly adjusted?
12
Why wear seat belts? . . . . . . . . . . . . . . . . . . . 17, 19
Why wear seatbelts? . . . . . . . . . . . . . . . . . . . . . . 32
Window aerial . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Opening and closing electrically . . . . . . . . 101
Windscreen heating . . . . . . . . . . . . . . . . . . . . . 115
Windscreen washer fluid
Warning lamp . . . . . . . . . . . . . . . . . . . . . . . . . 77
Windscreen wiper . . . . . . . . . . . . . . . . . . . . . . . 116
Windscreen wiper blades
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Windscreen wipers
Changing the front blades . . . . . . . . . . . . . 219
Changing the rear blade . . . . . . . . . . . . . . . 220
Winter driving
Diesel engine . . . . . . . . . . . . . . . . . . . . . . . . 208
Winter tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229
Four-wheel drive . . . . . . . . . . . . . . . . . . . . . 184
Working in the engine compartment . . . . . . . . 209
SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand, that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no right at all may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or omission, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the "Copyright" Act.
All rights on changes are reserved.
This paper has been manufactured using bleached non-chlorine cellulose.
SEAT S.A. - Reprint: 15.09.08
Portada ALHAMBRA_interior.qxd 10/9/08 11:59 Pgina 3
A L H A M B R A
ow ne
r s
m an
ua l
In gl
s S
91 55
1A B
A 20
( 07
.
Related manuals for Seat Alhambra Edition 07.08 2008 Minivan Owner's Manual
Manualsnet FAQs
If you want to find out how the Alhambra Seat works, you can view and download the Seat Alhambra Edition 07.08 2008 Minivan Owner's Manual on the Manualsnet website.
Yes, we have the Owner's Manual for Seat Alhambra as well as other Seat manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The Owner's Manual should include all the details that are needed to use a Seat Alhambra. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Seat Alhambra Edition 07.08 2008 Minivan Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Seat Alhambra Edition 07.08 2008 Minivan Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Seat Alhambra Edition 07.08 2008 Minivan Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Seat Alhambra Edition 07.08 2008 Minivan Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Seat Alhambra Edition 07.08 2008 Minivan Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.