Contents

Seat Ateca Edition 11.17 2017 Crossover SUV Appendix to Instructions Manual PDF

1 of 16
1 of 16

Summary of Content for Seat Ateca Edition 11.17 2017 Crossover SUV Appendix to Instructions Manual PDF

APPENDIX TO INSTRUCTIONS MANUAL

ATECA

Instruments and control lamps

Instruments and control lamps

Digital instrument panel (SEAT Digital Cockpit)

Fig. 1 SEAT Digital Cockpit on the instrument panel (classic view).

Details of the instruments :

Rev counter (revolutions per minute with engine running)1)

Engaged gear or currently selected posi- tion of the selector lever

Screen display page 3

Speedometer

Digital speed display

1

2

3

4

5

The SEAT Digital Cockpit is a digital instru- ment panel with a high-resolution colour TFT screen. It has 3 views which can be accessed by pressing the button on the multifunc- tion steering wheel. By selecting different in- formation profiles, displays additional to those of the classic circular instruments, such as navigation details, multimedia or driving data, may be shown.

Information profiles

The INSTRUMENT PANEL option (Infotain- ment button > function button View > Instrument panel) allows you to choose from the different options for displaying the information shown in the central area of the circular clocks of the SEAT Digital Cockpit.

1) Depending on the version, x100 or x1000. 1

Classic View

Classic View

The revolutions per minute and speedometer needles are full-length Fig. 1.

View 1, 2, 3 or AUTOMATIC*1)

Customising the information displayed in the central area of the circular clocks. Only 2 of these items of information can be displayed at the same time, but the user chooses which to display, and in what order, by moving the finger vertically over the dials.

Consumption. Graphic representation of current consumption and digital display of average consumption.

Acceleration. Graphic representation of lon- gitudinal and transverse acceleration.

Audio: Digital display of current audio play- back.

Height. Digital display of current height above sea level.

Compass. Digital compass display.

Information on arrival at destination. Digi- tal display of remaining travelling time, dis- tance to destination and estimated time of arrival.

Operating range. Digital display of remain- ing operating range.

Travelling time.

Route guidance.

Journey. Digital display of the route.

Assist systems. Graphic representation of different assist systems.

Traffic signs. Display of detected traffic signs.

Navigation. Graphic representation of navi- gation using arrows.

Depending on the equipment, the number and content of the selectable information profiles may vary.

Navigation map in the SEAT Digital Cockpit*

Fig. 2 Infotainment System: map transfer but- ton

Depending on the equipment, the SEAT Digital Cockpit may display a detailed map. To do this, select the Navigation menu op- tion on the instrument panel page 4.

Depending on the equipment, the navigation map may be displayed in the SEAT Digital Cockpit or in the Infotainment System or in both at the same time. If only displayed in the Infotainment System, the SEAT Digital Cockpit will only display the manoeuvre ar- rows.

1) Preset information depending on the selected Driving Mode.

2

Instruments and control lamps

Navigation map transfer

Using the map transfer button Fig. 2, the map is transferred from the Infotainment Sys- tem to the SEAT Digital Cockpit and vice ver- sa.

Using the right thumbwheel of the multifunc- tion steering wheel, while in the Naviga- tion menu, the map can be transferred again to the Infotainment System.

Status display

Possible displays on the instrument panel display

A variety of information can be viewed on the instrument panel display, depending on the vehicle equipment:

Doors, bonnet and boot open

Warning and information messages

Odometer

Time

Radio and navigation system instructions Booklet Infotainment System

Telephone display Booklet Infotainment System

Outside temperature

Compass display

Selector lever positions

Gear-change recommendation

Driving data display (multifunction display) and menus to perform various adjustments page 4

Service interval display

Speed warning page 4

Speed warning for winter tyres

Start-Stop system status display

Signs detected by the traffic signal detec- tion system

Active cylinder management display (ACT)

Low-consumption driving

Distinctive letters for engine (DLE)

Driver assistance systems display

Doors, bonnet and boot open

After unlocking the vehicle and while driving, the display on the instrument panel shows whether any of the doors, bonnet and the boot are open and, if necessary, it may also be indicated by an acoustic signal. The dis- play may vary according to the type of instru- ment panel fitted.

Selector lever positions (DSG dual clutch gearbox)

The current position of the selector lever is displayed both next to the lever and on the instrument panel display. When the lever is in the D/S position, as well as in the Tiptronic position, the gear engaged at any time is dis- played on the instrument panel display.

Outside temperature display

If the outside temperature is lower than ap- prox. +4C (+39F), the external temperature display additionally lights up the snowflake symbol . This symbol remains lit until the outside temperature rises above +6C (+43F) .

When the vehicle is stationary, when the aux- iliary heater is switched on or when driving at very low speed, the outside temperature dis- played may be higher than the actual temper- ature due to the heat discharged by the en- gine.

The measuring range extends from -45C (-49F) to +76C (+169F).

Gear-change recommendation

While driving, the instrument panel may indi- cate a gear-change recommendation for sav- ing fuel.

Odometer

The odometer registers the total distance travelled by the car.

The odometer (trip) displays the distance travelled since the last odometer reset.

Set the Trip recorder to zero using the Info- tainment System or the multifunction steer- ing wheel page 5.

3

Speed warning for winter tyres

Speed warning for winter tyres

If the maximum speed setting is exceeded, this will be displayed on the instrument pan- el display page 4.

The settings for the speed warning can be adjusted in the Infotainment System, in the vehicle settings menu.

Compass display

Depending on the equipment, when the igni- tion is switched on, the direction in which you drive is displayed on the instrument pan- el display with a symbol, e.g. NW for North- west.

When the Infotainment System is turned on and there is no active guide to the destina- tion, the graphic representation of a compass is also displayed.

Low-consumption driving

When driving, it is displayed on the instru- ment panel if the vehicle is in low-con- sumption status.

Distinctive letters for engine (DLE)

Select the Operating range information profile on the instrument panel (Infotainment button > function button View > Driv- ing data > Operating range).

Press and hold the multifunction steer- ing wheel button until the Service menu is

displayed on the instrument panel display page 5.

Select the Distinctive letters for engine menu option.

WARNING

Even when outside temperatures are above freezing, some roads and bridges may be icy.

The snowflake symbol indicates that there may be danger of frost.

At outside temperatures above +4C (+39 F), there could also be ice even when the snowflake symbol is not lit up.

Do not rely only on the outside temperature display!

Note

Different instrument panels are available and therefore the versions and instructions on the display may vary. In the case of dis- plays without information or warning texts, faults are indicated exclusively by the control lamps.

Some indications on the instrument panel display may be concealed by a sudden event, e.g. an incoming call.

Depending on the equipment, some set- tings and instructions can also be adjus- ted/made or displayed in the Infotainment System.

If there are several warnings, the corre- sponding symbols will light up successively

for a few seconds. The symbols will remain lit until the cause is eliminated.

If, when the ignition is switched on, warn- ings about existing faults are displayed, it is possible that adjustments cannot be per- formed and information cannot be displayed as described. In this case, go to a specialised workshop and request the repair of the faults.

Instrument panel menus

The number of menus and informative dis- plays available will depend on the vehicles electronic system and equipment.

A specialised workshop will be able to pro- gramme other functions or change the exist- ing ones, depending on the vehicle equip- ment. SEAT recommends visiting a SEAT deal- ership for this.

Some menu options can only be opened when the vehicle is at a standstill.

Driving data page 5 Assist systems. Lane Assist On/Off Front Assist On/Off Blind Spot Monitor On/Off ACC (only display)

Navigation Booklet Infotainment System Audio Booklet Infotainment System

4

Instruments and control lamps

Telephone Booklet Infotainment System Vehicle status page 6 Lap timer*

Service Menu

Various adjustments can be performed in the Service menu depending on the equipment.

Open the Service menu

To open the Service menu, select the Oper- ating range information profile (Infotain- ment button > function button View > Driving data > Operating range) and hold down the multifunction steering wheel button for approx. 4 seconds. Now you can navigate the menu with the multi- function steering wheel buttons in the usual way.

Restart the service interval display

Select the Service menu and follow the in- structions given on the instrument panel dis- play.

Restart the oil service

Select the Restore Oil Service menu and follow the instructions given on the in- strument panel display.

Restart driving data

Select the Reset Trip recorder menu and follow the instructions given on the in- strument panel display.

Distinctive letters for engine (DLE)

Select the Distinctive letters for engine menu. The distinctive letters for en- gine will be displayed on the instrument pan- el display.

Set time

Select the Time menu and set the correct time by turning the right thumbwheel of the multifunction steering wheel.

Driving data display (multifunction display)

The driving data display (multifunction dis- play) shows different driving data and con- sumption values.

Switch displays

Turn the right thumbwheel of the multifunc- tion steering wheel page 8.

Change the memory

Press the button on the multifunction steering wheel.

Since start memory

The memory will be deleted if the journey is interrupted for more than 2 hours.

Since refuelling memory

Display and memory of the driving data and consumption values collected. When refuel- ling, the memory is erased.

Total calculation memory

This memory collects driving data up to a maximum of 19 hours and 59 minutes or 99 hours and 59 minutes, or up to a maximum of 1,999.9 km or 9,999.9 km. When one of these maximum values is exceeded (it varies depending on the version of the instrument panel), the memory is erased.

Erase drving data memories

Select the memory that you wish to erase.

Press the button of the multifunction steering wheel for approx. 2 seconds.

Select the displays

The driving data to be displayed may be ad- justed in the Infotainment System, in the ve- hicle's settings menu.

Average consumption display

The average fuel consumption is displayed after approx. 300 meters.

5

Operating range display

Operating range display

Approximate distance in km that can still be travelled if the same driving style is main- tained.

Display AdBlue Operating range or Op- erating range 1)

Approximate distance in km that can still be travelled with the current AdBlue tank level if the same driving style is maintained. The display is shown from an operating range of less than 2,400 km and cannot be deactiva- ted.

Average speed display

The average speed is displayed after approx. 100 metres.

Convenience consumers

A list of the connected convenience systems that increase energy consumption is dis- played, e.g. the air conditioning.

Set a speed warning

Select the display Speed warning at --- km/h or Speed warning at --- mph.

Press the button of the multifunction steering wheel to save the current speed and activate the warning.

Set the desired speed after approx. 5 sec- onds by turning the right thumbwheel of the multifunction steering wheel. Next, press the button or wait several seconds. The speed

is stored and the warning activated.

To disable the warning, press the button again. The saved speed is deleted.

The warning may be adjusted for speeds be- tween 30 km/h (18 mph) and 250 km/h (155 mph).

Warning and information messages

The system runs a check on certain compo- nents and functions when the ignition is switched on and while the vehicle is moving. Faults are displayed on the instrument panel display in the form of red and yellow warning symbols accompanied by messages and, de- pending on the case, even an acoustic sig- nal. The display of messages and symbols may vary depending on the version of the in- strument panel.

Existing faults can also be checked manually. This requires opening the menu Vehicle status or Vehicle page 4.

The symbol flash- es or lights up (partly accompanied by acoustic warning signals). Do not car- ry on driving! Danger! Check the fault and eliminate the cause. In this case, you should seek professional assis- tance.

The symbol flashes or lights up (partly accompanied by acoustic warning signals). Malfunc- tions or lack of operating liquids can cause damage to the vehicle and its fail- ure. Check the function that fails as soon as possible. In this case, you should seek professional assistance.

Provides information about processes in the vehicle.

Note

Depending on the equipment, some set- tings and instructions can also be adjus- ted/made or displayed in the Infotainment System.

If there are several warnings, the corre- sponding symbols will light up successively for a few seconds. The symbols will remain lit until the cause is eliminated.

If, when the ignition is switched on, warn- ings about existing faults are displayed, it is

Priority 1 warning (in red)

Priority 2 warning (in yellow).

Informative message.

1) Not available in all countries. 6

Instruments and control lamps

possible that adjustments cannot be per- formed and information cannot be displayed as described. In this case, go to a specialised workshop and request the repair of the faults.

Fuel gauge

Fig. 3 Fuel gauge in the SEAT Digital Cockpit.

Fuel tank almost empty

The control lamp turns yellow

The fuel in the reserve is being used (red mark) . Refuel as soon as possible.

Presence of water in the fuel

The control lamp turns yellow

Switch the engine off and seek professional assistance.

WARNING

If a vehicle is driven with too low a fuel level, it could stop in traffic and accidents and seri- ous injuries could occur.

If the level of the fuel tank is too low, the fuel could reach the engine irregularly, espe- cially when going up or down slopes.

The steering and the driver and braking as- sist systems do not work if the engine runs ir- regularly or if it switches itself off due to lack of fuel or its irregular topping up.

Refuel as long as there is only a quarter of fuel left in the tank to prevent the vehicle from stopping due to lack of fuel.

CAUTION

Never run the fuel tank completely dry. If the fuel is not topped up regularly, it may cause faulty combustion and unburnt fuel could reach the exhaust system. The catalytic con- verter or the particle filter could be damaged!

Note

The small arrow on the fuel gauge next to the fuel dispenser symbol points to the side of the vehicle where the fuel tank flap is loca- ted.

Engine coolant temperature display

Fig. 4 Engine coolant temperature display in the SEAT Digital Cockpit.

Cold area. The engine has not yet reached the operating temperature. Avoid high engine speeds and subjecting the engine to high stress as long as it has not reached the operating temperature.

Normal area

Warning area. If the engine is subjected to high stress, especially at high exterior temperatures, the light emitting diodes can light up in the warning area.

Engine coolant

The control lamp lights up and the central warning light flashes red.

The engine coolant level is not correct or there is a fault in the coolant system. Do not carry on driving!

A

B

C

7

Operating the instrument panel

Stop the vehicle, switch off the engine and let it cool.

Check the engine coolant level.

If the warning lamp does not go out even if the coolant level is correct, seek professional assistance.

Operating the instrument panel

Topic introduction

Some menu options can only be opened when the vehicle is at a standstill.

WARNING

Distracting the driver in any way can lead to an accident and cause injuries.

Never use the menus on the instrument panel display while driving.

Note

After charging or changing the 12-volt bat- tery, check the system settings. In case of in- terruption of the power supply, the system settings may have changed or been deleted.

Operation with the multifunction steering wheel

Fig. 5 Right side of the multifunction steering wheel: buttons to use the menus and infor- mative displays of the instrument panel.

As long as there is a priority 1 warning page 6, no menu can be accessed. Some warnings can be confirmed and hidden with the button of the multifunction steering wheel Fig. 5.

Select a menu or an informative display

Switch the ignition on.

If a message or vehicle symbol is dis- played, press the Fig. 5 button; several times if required.

To switch menus use the or

Fig. 5 buttons.

To open the menu or the informative dis- play that appears, press the Fig. 5 but-

ton or wait a few seconds until the menu or informative display opens automatically.

Adjust menu settings

In the displayed menu, turn the right thumbwheel of the multifunction steering wheel Fig. 5 until the desired menu option is selected. The option is highlighted.

Press the Fig. 5 button for the desired modifications. When the function or system in question are highlighted, it means they are enabled.

Return to menu selection

Press the button or Fig. 5.

Note

If, when the ignition is switched on, warnings about existing faults are displayed, it is pos- sible that adjustments cannot be performed and information cannot be displayed as de- scribed. In this case, go to a specialised workshop and request the repair of the faults.

8

Multifunction steering wheel*

Multifunction steering wheel*

Operating audio, telephone and navigation with voice control 3 Valid for vehicles with SEAT Digital Cockpit (digital panel).

Fig. 6 Controls on the steering wheel.

The steering wheel includes multifunction modules from where it is possible to control

the audio, telephone and radio/navigation functions without needing to distract the driver.

Button Radio Media (except AUX) AUX Telephonea) Navigationa)

A

Turn

Turn volume up/down. You do not need to be in audio mode (radio).

Turn volume up/down. You do not need to be in audio mode (media).

Turn volume up/down. You do not need to be in audio mode (media).

Turn volume up/down. You do not need to be in telephone mode.

Turn announcement volume up/down. You do not need to be in navigation mode but there has to be an announce- ment active when you adjust the volume.

A

Press Mute volume. Mute volume. Mute volume. Mute an incoming call.

Mute the current navigation an- nouncement.

B a) Enable/disable voice controlb). This function can be performed from any mode, except if there is an active call.

9

Operating audio, telephone and navigation with voice control

Button Radio Media (except AUX) AUX Telephonea) Navigationa)

C / D Search for the previous/next stationc).

Short press: Switch to the pre- vious/next song. Hold down: Fast rewind/for- wardd).

No function

No active call: Radio/Media functionality (except AUX) Active call: no function

No function for the other modes (navigation, assistants, vehicle status, lap timer*, driv- ing data).

E / F a) Change menu on instrument panel.b)

G Short press: change view Classic Info - Digital Maps - Advanced Infob). Hold down: access the setting view of the Customised Profilesb).

H

Turn List of available functions (au- dio/media).

List of available functions (au- dio/media).

No function

There is no active call: List of last calls. Active calls: access the call options list (call on hold, hang up, mute microphone, private number, etc.).

Navi System Plus: Zoom in/out (with and without active route). Navi System: If there is a map in the Digital Panel: Zoom in/out (with and without active route). If there is no map in the Digital Panel: transfer the map to the Digital Panel (with and without active route).

H

Press No function No function No function No function

Auto Zoom/Manual Zoom if the map is in the Digital Panel.

a) Depending on the vehicle's equipment package. b) This function can be used from any mode (audio, media, navigation, assistants, vehicle status, lap timer*, driving data). c) This action can be performed when you are listening to the radio; there is no need to be in audio-radio mode. d) These actions can be performed when you are listening to media; there is no need to be in audio-media mode.

10

Glass sunroof*

Glass sunroof*

Convenience function to open or close the sunroof*

Fig. 7 Door handle: sensor surfaces.

The glass sunroof can be opened and closed with the convenience function, just like the windows

Using the door lock*

Hold the key in the door lock of the driver door in either the unlocking or locking posi- tion to open or close the roof in the tilted po- sition. Release the key to interrupt this func- tion.

Using the remote control

Press and hold the lock/unlock button to open/close the roof. If you release the button that is being pressed, the opening/closing function is interrupted.

Using the Keyless Access* system (only clos- ing)

Hold a finger for a few seconds on the lock- ing sensor surface Fig. 7 B of the door handle to close the roof. If the sensor surface is no longer being touched, the closing func- tion is interrupted.

WARNING

If the sunroof is used negligently or without paying due attention, it can cause serious in- jury.

11

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to under- stand, that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no right at all may derive based on the data, drawings and descriptions in this current handbook.

All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or omission, the information included in the current handbook is valid as of the date of closing print.

Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.

SEAT reserves all rights in accordance with the Copyright Act.

All rights on changes are reserved.

This paper has been manufactured using bleached non-chlorine cellulose.

SEAT S.A.

Manualsnet FAQs

If you want to find out how the Ateca Seat works, you can view and download the Seat Ateca Edition 11.17 2017 Crossover SUV Appendix to Instructions Manual on the Manualsnet website.

Yes, we have the Appendix to Instructions Manual for Seat Ateca as well as other Seat manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Appendix to Instructions Manual should include all the details that are needed to use a Seat Ateca. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Seat Ateca Edition 11.17 2017 Crossover SUV Appendix to Instructions Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Seat Ateca Edition 11.17 2017 Crossover SUV Appendix to Instructions Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Seat Ateca Edition 11.17 2017 Crossover SUV Appendix to Instructions Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Seat Ateca Edition 11.17 2017 Crossover SUV Appendix to Instructions Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Seat Ateca Edition 11.17 2017 Crossover SUV Appendix to Instructions Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.