12W, 27W & 42W LED ROUND WORK LIGHT WITH MOUNTING BRACKET MODEL NO: LED1R / LED3R / LED4R
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY 1.1. ELECTRICAL SAFETY
WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the following: You must check all electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs, sockets and any other connectors for wear or damage.
1.1.1. Ensure that cables are always protected against short circuit and overload. 1.1.2. Regularly inspect power supply cables check all connections to ensure that none are loose. IMPORTANT: Ensure that the voltage marked on the appliance matches the power supply to be used and that the circuit is fitted with the correct fuse. If in doubt, consult a qualified technician to connect the floodlight to a fused and switched DC supply.
8 DO NOT pull or carry the floodlight by the power cable. 8 DO NOT use worn or damaged cables, plugs or connectors. 9 Immediately have any faulty item repaired or replaced by a qualified technician.
2. INTRODUCTION Model No. LED1R 4 x 3W Epistar high power LEDs. Produces up to 960 lumens output. Operating voltage of 10-30V DC. Waterproof rating of IP68. ECE R10 Certified and E-Marked. Suitable replacement for traditional halogen work lights. Powder coated die-cast aluminium housing. Adjustable grade 201 shock-resistant stainless steel bracket. Model No. LED3R 9 x 3W Epistar high power LEDs. Produces up to 2160 lumens output. Operating voltage of 10-30V DC. Waterproof rating of IP68. ECE R10 Certified and E-Marked. Suitable replacement for traditional halogen work lights. Powder coated die-cast aluminium housing. Adjustable grade 201 shock-resistant stainless steel bracket. Model No. LED4R 14 x 3w Epistar high power LEDs. produces up to 3360 lumens output. Operating voltage of 10-30V DC. Waterproof rating of IP68. ECE R10 Certified and E-marked. Suitable replacement for traditional halogen work lights. Powder coated die-cast aluminium housing. Adjustable grade 201 shock-resistant stainless steel bracket.
3. SPECIFICATION Model No: . . . . . . . . . . . . . . . . .LED1R . . . . . . . . . . . . . . . . . . . LED3R . . . . . . . . . . . . . . . . . . .LED4R Lumen Output: . . . . . . . . . . . . . . .960lm . . . . . . . . . . . . . . . . . . . 2160lm . . . . . . . . . . . . . . . . . . .3360lm Power: . . . . . . . . . . . . . . . . . . . . . . 12W . . . . . . . . . . . . . . . . . . . . . 27W . . . . . . . . . . . . . . . . . . . . . 42W Supply: . . . . . . . . . . . . . . . .10-30V DC . . . . . . . . . . . . . . . . 10-30V DC . . . . . . . . . . . . . . . .10-30V DC Size (W x H): . . . . . . . . . . . . . . 80mm . . . . . . . . . . . . . . . . . . 115mm . . . . . . . . . . . . . . . . . 115mm Nett Weight: . . . . . . . . . . . . . . . 0.19kg . . . . . . . . . . . . . . . . . . . .0.38kg . . . . . . . . . . . . . . . . . . . 0.60kg
LED1R / LED3R / LED4R | Issue 1 13/03/19Original Language Version Jack Sealey Limited
Refer to instructions
LED3R
LED4R
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No