Sealey SG19.V2 Underseal Gun Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey SG19.V2 Underseal Gun Instruction Manual PDF

instructions for

underseal gun with canister & extension probe model no: sg19.V2

thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. saFetY warning! disconnect the gun from the air supply before changing accessories, servicing or performing any maintenance. 9 Wear eye protection, a mask, protective clothing and gloves. 9 locate the gun in an adequate working area for its function, keep area clean and tidy and free from unrelated materials, and ensure

there is adequate lighting. 9 Useinawellventilatedareaawayfromsourcesofignition.Ensureunderseal/rustproofingfluidmanufacturersinstructionsare

carefully followed. 9 maintain the gun in good condition. replace or repair damaged parts. use recommended parts only. non authorised parts may be

dangerous and will invalidate the warranty. 9 Keep the gun clean and rinse out nozzle, quick-release coupling and suction pipes with suitable solvent after use. warning! if gun components become blocked there is a danger of excessive pressure building up in unit causing the canister to

burst. 9 Removeillfittingclothing.Removeties,watches,rings,andotherloosejewellery,andcontainlonghair. 9 Keep children and unauthorised persons away from the working area. 9 When not in use ensure the air supply is turned off and the gun is disconnected. Avoid unintentional starting. 8 do not place attachments close to your face (especially eyes, ears, etc) and do not point hose at other persons or animals. 8 do not carry by the air hose, or yank the hose or the gun from the air supply. 8 do notusethegunforanypurposeotherthanforwhichitisdesignedanddonotfillwithanyotherfluidorliquid. 8 do not operate the gun if damaged. 8 do not direct air from the air hose at yourself or others.. 9 When not in use disconnect from the air supply and store in a safe, dry, child proof area.

2. introduction suitableformostbrandsofwaxrustinhibitor.suppliedwithnozzleforsurfaceapplicationand910mmflexibleprobeforcavities.

3. speciFication model no: .................................................................sG19.V2 recommended air pressure: ...................87-145psi (6-10bar) Air consumption without extension: ........................... 13.4cfm Air consumption with extension: .................................. 6.4cfm Air inlet size:..............................................................1/4BsP optional rigid probe: ....................................................sG191

sG19.V2 | issue:3 (l) 05/09/17Original Language Version Jack sealey limited

refer to instruction

manual

Wear eye protection

Wear a mask Wear protective

gloves

Wear protective clothing

fig.1 fig.2 fig.3

4. operation 4.1. Followtheinstructionsoftherustpreventativefluid/undersealcarefully.Ensurethatthecontainerisshakenbeforeuse. 4.2. preparing gun for use. 4.2.1. Pourtherustpreventativeintothecanister(fig.3)andsecurelyscrewtheguntopontocanister. 4.2.2. Attachtheendofthegunhandletothecompressedairsystem(fig4). 4.2.3. Aimthenozzleofthegunintoasafeareaanddepresstheguntrigger(fig.5A)tocheckandadjustthegunnozzletotherequired

suctionandspreadaccordingtotheviscosityofthefluidinthecontainerorcanister(fig.5B). 4.3. extension probes. 4.3.1. TheSG19issuppliedwithanextensionprobe(fig.2)whichmayonlybeusedwiththinfluids.Theflexibleprobeisforsprayingthin

fluidsintocavities,betweenpanelsandinsidedoorsetc. Note:Probeisonlysuitableforusewiththinfluids. 4.3.2. for spraying hard-to-reach areas, the sG19 may be used with the optional sG191 long reach extension probe. 4.3.3. Tofitprobereleasethelockingnutonthetriggernozzle(fig.6C)andremovethenozzle(D),retainingitinasafeplace. 4.3.4. Chosetheappropriateextensionnozzle,andinsertthesprungbrasspick-upintotheendofthetriggerhoseoutlet(fig.7E)andsecure

withthelockingnut(fig.7G).

5. Maintenance warning! ensure you remove the gun from the air supply before attempting any maintenance.

5.1. Itisveryimportanttokeepthegunandcomponentscleantoensurefreepassageoffluidsinuse. 5.2. After use clean all items especially probes with a suitable solvent and allow to dry before storage.

warning! do not use any component that has become blocked as this may build up excessive air pressure and cause canister to explode.

sealey group, Kempson way, suffolk business park, bury st edmunds, suffolk. ip32 7ar 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

enVironMent protection recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

weee regulations dispose of this product at the end of its working life in compliance with the eu directive on Waste electrical and electronic equipment (Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. contact your local solid waste authority for recycling information.

note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. important: no liability is accepted for incorrect use of this product. warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Parts support is available for this product. to obtain a parts

Manualsnet FAQs

If you want to find out how the SG19.V2 Sealey works, you can view and download the Sealey SG19.V2 Underseal Gun Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey SG19.V2 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey SG19.V2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey SG19.V2 Underseal Gun Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey SG19.V2 Underseal Gun Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey SG19.V2 Underseal Gun Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey SG19.V2 Underseal Gun Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey SG19.V2 Underseal Gun Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.