Sealey VS7010 Tube Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey VS7010 Tube Instruction Manual PDF

OIL FILTER DRAIN TUBE - OIL FILTER DRAIN TUBE & BOTTLE Model no: VS7010 & VS7110

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETy 9 Keep the drain tube and bottle clean and maintain it in good condition. 9 Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty. 9 Keep all non-essential persons away from the work area. 9 Check connections and fittings before use. 9 ensure that the bottle capacity exceeds the amount of fluid to be collected. 8 DO NOT use for any purpose other than that for which it is designed. 8 DO NOT operate if any parts are damaged or missing as this may cause failure and/or personal injury. 8 DO NOT leave drain tube and bottle operating unattended. IMpORTANT! ensure that you wear protective clothing, gloves, goggles, face mask as appropriate for the fluid being extracted. WARNING! DO NOT allow uncontrolled discharge of fluids thus polluting the environment. 9 dispose of waste fluids in accordance with local authority regulations. WARNING! DO NOT use with gasoline or other flammable liquids. 8 DO NOT use the unit to extract dangerous chemicals, poisons, acids, alkaline or solvents. 9 The container is not designed for long term storage. 8 DO NOT store the unit under extreme conditions. 8 DO NOT adapt the unit for any other purpose. 9 When not in use, store in a safe, dry, childproof area.

2. INTRODUcTION ModelNo.VS7010DesignedtoattachtotheoilfilterhousingonVAGFSipetrolengines.Allowsthefilterhousingtobedrained beforeremoval,preventingspillage.Useinconjunctionwithasuitableoildrainer.ModelNo.VS7110Featuresacontrolvalvefitted to the bottle and hanging chain.

3. OpERATION 3.1. With the vehicle on a suitable ramp drain engine oil. 3.2. Locatetheoilfilter(blackplastichousing). 3.3. Remove the dust cover on the bottom of the housing to expose the red bleed valve. 3.4. VS7110 - Secure drain bottle using the retaining chain and open valve, on top of the drain bottle. 3.5. Screwtheadaptorintotheendoftheplastichousing.Screwingintheadaptorwillreleasetheredbleedvalveinthefilterhousing

which allows the oil to drain. 3.6. once fully drained unscrew adaptor. 3.7. Thefilterhousingcannowberemovedfromtheengineusingthelargehexlocatedatthebottomofthefilterhousing.

4. MAINTENANcE Keep the unit clean, wipe off any fluid spillage. Keep the tubes clean and clear of blockages. Check that all tubes and connections are in good condition.

VS7010VS7110Issue2(HF)24/08/18Original Language Version Jack Sealey limited

Refer to instructions

VS7010

Wear eye protection

Wear protective gloves

Wear a mask

VS7110

Sealey Group, Kempson Way, Suffolk Business park, Bury St Edmunds, Suffolk. Ip32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT pROTEcTION Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: no liability is accepted for incorrect use of this product. Warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.

VS7010VS7110Issue2(HF)24/08/18Original Language Version Jack Seal

Manualsnet FAQs

If you want to find out how the VS7010 Sealey works, you can view and download the Sealey VS7010 Tube Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey VS7010 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey VS7010. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey VS7010 Tube Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey VS7010 Tube Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey VS7010 Tube Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey VS7010 Tube Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey VS7010 Tube Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.