Sealey ATD25301 Tie Down Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey ATD25301 Tie Down Instruction Manual PDF

AUTO RETRACTABLE RATCHET TIE DOWN

MODEL NOS: ATD25301, ATD50301

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY 9 In selecting and using web lashings, consideration shall be given to the required lashing capacity, taking into account the mode

of use and the nature of the load to be secured. The size, shape and weight of the load, together with the intended method of use, transportenvironmentandthenatureoftheloadwillaffectthecorrectselection.

9 For stability reasons free-standing units of load have to be secured with a minimum of one pair of web lashings for frictional lashing and two pairs of web lashing for diagonal lashing.

9 The selected web lashings shall both be strong enough and of the correct length for the mode of use. Basic lashing rules: Planthefittingandremovaloperationsoflashingbeforestartingajourney; Keepinmindthatduringjourneyspartsoftheloadmayhavetobeunloaded; Calculate the number of web lashings according to EN 12195-1. OnlythoseweblashingsdesignedforfrictionallashingwithSTFonthelabelaretobeusedforfrictionallashing; Checkthetensionforceperiodically,especiallyshortlyafterstartingthejourney.

9 Becauseofdifferentbehaviourandelongationunderloadconditions,differentlashingequipment(e.g.lashingchainandweb lashings)shallnotbeusedtolashthesameload.Considerationshallalsobegiventoancillaryfittings(components)andlashing devices in the load restraint assembly are compatible with the web lashing.

9 Duringuseflathooksshallengageoverthecompletewidthofthebearingsurfaceofthehook. 9 Release of the web lashing: Care should be taken to ensure that the stability of the load is independent of the lashing equipment and

thatthereleaseoftheweblashingshallnotcausetheloadtofalloffthevehicle,thusendangeringthepersonnel.Ifnecessaryattach lifting equipment for further transport to the load before releasing the tensioning device in order to prevent accidental falling and/or tilting of the load. This applies as well when using tensioning devices which allow controlled removal.

9 Before attempting to unload a unit of load its web lashings shall be released so that it can be lifted freely from the load platform. 9 During loading and unloading attention has to be paid to proximity of any low overhead power lines. 9 The materials from which web lashings are manufactured have a selective resistance to chemical attack. Seek the advice of the

manufacturerorsupplierifexposuretochemicalsisanticipated.Itshouldbenotedthattheeffectsofchemicalsmayincreasewith risingtemperature.Theresistanceofman-madefibrestochemicalsissummarizedbelow.

9 Polyamidesarevirtuallyimmunetotheeffectsofalkalis.However,theyareattackedbymineralacids. 9 Polyester is resistant to mineral acids but is attacked by alkalis. 9 Polypropyleneislittleaffectedbyacidsandalkalisandissuitableforapplicationswherehighresistancetochemicals(otherthan

certain organic solvents) is required. 9 Solutionsofacidsoralkaliswhichareharmlessmaybecomesufficientlyconcentratedbyevaporationtocausedamage.Take

contaminated webbings out of service at once, thoroughly soak them in cold water, and dry naturally. 9 Web lashings complying with this Part of EN 12195 are suitable for use in the following temperature ranges:

-40Cto+80Cforpolypropylene(PP); -40Cto+100Cforpolyamide(PA); -40Cto+120Cforpolyester(PES).

9 These ranges may vary in a chemical environment. In that case the advice of the manufacturer or supplier shall be sought. 9 Changingtheenvironmentaltemperatureduringtransportmayaffecttheforcesintheweblashing.Checkthetensionforceafter

entering warm areas. 9 Weblashingsshallberejectedorreturnedtothemanufacturerforrepairiftheyshowanysignsofdamage. 9 The following criteria are considered to be signs of damage:

Onlyweblashingsbearingidentificationlabelsshallberepaired; If there is any accidental contact with chemical products, a web lashing shall be removed from service and the manufacturer or suppliershallbeconsulted; forweblashings(toberejected):tears,cuts,nicksandbreaksinloadbearingfibresandretainingstitches;deformationsresulting fromexposuretoheat; forendfittingsandtensioningdevices:deformations,splits,pronouncedsignsofwear,signsofcorrosion.

9 Careshouldbetakenthattheweblashingisnotdamagedbythesharpedgesoftheloadonwhichitisused.Avisualinspection before and after each use is recommended.

9 Only legibly marked and labelled web lashings shall be used. 9 Weblashingsshallnotbeoverloaded:Onlythemaximumhandforceof500N(50daNonthelabel;1daN=1kg)shallbeapplied.

Mechanical aids such as levers, bars etc. as extensions are not to be used unless they are part of the tensioning device. 9 Web lashings shall never be used when knotted or twisted.

ATD25301,ATD50301Issue118/11/21Original Language Version Jack Sealey Limited

Refer to instructions

Release Tab

Ratchet lever

9 Damage to labels shall be prevented by keeping them away from sharp edges of the load and, if possible, from the load. 9 The webbing shall be protected against friction, abrasion and damage from loads with sharp edges by using protective sleeves

and/or corner protectors.

2. INTRODUCTION Manufacturedfrompolyesterwebbingwithstitchedreinforcementaroundhooks.Auto-rewindatapushofabuttonretractsthewebbing, leaving the unit neat and tidy. Simple drum and ratchet mechanism tensions the webbing to provide superior load restraint. Suitable for securingofloadsandtarpaulinsontoflatbedsortrailers.Handlesandreleasemechanismarerubbercoatedforaddedcomfort.

3. SPECIFICATION

4. OPERATION NOTE: If unsure of requirements for specific application of Tie Down, seek professional advice. 4.1. INSTALLING THE STRAP 4.1.1. DepresstheReleasetab(fig.1)anddrawoutasmuchstraplength as required. 4.1.2. Locatestraphookstodesiredfixingpointsand,usingtheratchet lever(fig.1),tightenthestraptotherequiredtension. 4.2. RELEASING THE STRAP 4.2.1. DepresstheReleasetab(fig.1)andallowthestraptolengthen sufficientlyenoughtoenablethestraphookstoberemovedfrom theirfixingpoints. 4.2.2. Once disconnected, depress the Release tab to allow the strap to fully withdraw into the ratchet housing. NOTE: For additional information see the Sealey YouTube channel.

5. MAINTENANCE 5.1. Afteruse,thoroughlywipedownthestrapandtheratchet body using a soft, clean and dry cloth. 5.2. Store the unit in a clean, dry environment.

Original Language Version Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Model No. Breaking Strain

Hook Maximum Tension

Webbing Length

Webbing Width

Quantity

ATD25301 600 kg S-Type 300 kg 3 m 25 mm 1

ATD50301 1500 kg S-Type 750 kg 3 m 50 mm 1

ATD25301,ATD503

Manualsnet FAQs

If you want to find out how the ATD25301 Sealey works, you can view and download the Sealey ATD25301 Tie Down Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey ATD25301 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey ATD25301. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey ATD25301 Tie Down Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey ATD25301 Tie Down Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey ATD25301 Tie Down Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey ATD25301 Tie Down Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey ATD25301 Tie Down Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.