Sealey TRM10.V2 Thread Repair Instruction Manual PDF

Download download
Sealey TRM10.V2 Thread Repair Instruction Manual PDF
Sealey Manual Sealey Thread Repair Manual Sealey TRM10.V2 Manual Sealey Thread Repair Instruction Manual
Pages 2
Year 0
Language(s)
English en
1 of 2
1 of 2

Summary of Content for Sealey TRM10.V2 Thread Repair Instruction Manual PDF

Page 1

THREAD REPAIR MASTER KITS MODEL NOS: TRM5.V2, 6.V2, 8.V2, 9.V2, 10.V2, 12.V2, 14.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools. 8 DO NOT use tools if damaged. 8 DO NOT use this tool for purposes other than for which it is designed. 9 Maintain tools in good and clean condition for best and safest performance. 9 Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist. 9 Wear suitable clothing to avoid snagging. DO NOT wear jewellery and tie back long hair. 9 Keep children and unauthorised persons away from the work area. 8 DO NOT use the thread repair set when you are tired or under the influence of alcohol, drugs or intoxicating medicine. 9 Account for all tools and parts being used, DO NOT leave them in or near an engine. Return all parts to the case and store this in a

safe, dry, childproof location. WARNING! Failure to comply with these instructions may result in damage to the thread repair set or work piece and/or personal injury. WARNING! The warnings referred to in this guide cannot cover all possible conditions and situations that may occur. It must be

understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.

2. INTRODUCTION Creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads against wear and damage. Set includes drill bit, thread tap, insert installation and lug breaking tool. Supplied with three different lengths of thread insert.

3. SPECIFICATION

4. INSTRUCTIONS

Refer to instruction

manual

Wear eye protection

TRM.V2 kits Issue:1 28/03/22Original Language Version Jack Sealey Limited

Model No: Replacement inserts Thread lengths Thread size TRM5.V2 TRM5R 3.5, 5, 7mm (5 of each) M5 x 0.8mm

TRM6.V2 TRM6R 4, 6, 9 (5 of each) M6 x 1mm

TRM8.V2 TRM8R 6, 9, 12mm (5 of each) M8 x 1.25mm

TRM9.V2 TRM9R 7, 14mm (3 of each), 11mm (x4) M9 x 1.25mm

TRM10.V2 TRM10R 7.5, 15mm (3 of each), 11mm (x4) M10 x 1.5mm

TRM12.V2 TRM12R 9, 18mm (2 of each), 14mm (x4) M12 x 1.75mm

TRM14.V2 TRM14R 10, 21mm (1 of each), 16mm (x3) M14 x 1.25mm

4.1 Drill out the damaged thread using the correctly sized twist drill bit provided.

4.2 Tap drilled hole using screw tap provided.

Page 2

Original Language Version Jack Sealey Limited

4.3 Load thread insert into installation tool. 4.4 Screw insert into threaded hole.

4.5 Remove the tag from the insert using the breaking pin tool. 4.6 Thread is repaired and ready to use.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Importan

Manualsnet FAQs

If you want to find out how the TRM10.V2 Sealey works, you can view and download the Sealey TRM10.V2 Thread Repair Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey TRM10.V2 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey TRM10.V2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey TRM10.V2 Thread Repair Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey TRM10.V2 Thread Repair Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey TRM10.V2 Thread Repair Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey TRM10.V2 Thread Repair Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey TRM10.V2 Thread Repair Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.