Sealey SDL11 Soldering Iron Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey SDL11 Soldering Iron Instruction Manual PDF

LITHIUM-ION RECHARGEABLE SOLDERING IRON KIT 30W MODEL NO: SDL11

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this

equipment,makesureyouknowwherethenearestfireextinguisheris. WARNING!Alwayswearapprovedeye/faceprotectionwhenoperatingthesolderingiron. WARNING!Donotusethesolderingironifyounoticedamagetotheworkpiece. WARNING!Alwayspointthesolderingironawayfromtheeyesandbodywhenduringoperation. WARNING!Donotputthesolderingirondown,putitbackinitsholder. WARNING!Onlyuseinawellventilatedarea. 9 Keepflammablematerialawayfromthetorchwhenoperating. 8 DO NOToperatethesolderingironwhenyouaretiredorundertheinfluenceofalcohol,drugsorintoxicatingmedication. 8 DO NOTusethesolderingironinanareawherepaintfumes,solventsorotherflammablesolids,liquidsorgasesposeapotential

hazard. 8 DO NOTholdanyworkpiecebyhand. 8 DO NOTtouchtheworkpiececlosetotheheatedareaasitwillbeveryhot.Allowtocool. 8 DO NOToperatethesolderingironifitisdamagedasthismaycausefailureand/orpossiblepersonalinjury. 8 DO NOTtouchthetopofthesolderingironduringorimmediatelyafteruse,asitwillbeveryhot.Allowtocool. 8 DO NOTallowchildrentooperatethesolderingiron. 9 Whennotinuse,storeawayfromdirectsunlightinasafe,dry,childprooflocation. 8 DO NOTstoreatover40C,suchasinacarinhotweather.

2. INTRODUCTION Cordlessandlightweightsolderingiron.InbuiltLEDtoilluminatesolderingareainlowlightareassuchasenginebays.Kitincludes standard,chiselandheatshrinktipsaswellascleaningsponge,solder,standandUSBcharginglead.Heatsuptoamaximum temperatureof600Candhasa40minuteworkingtime.

3. SPECIFICATION Model No.:.................................................................. SDL11 Battery:...................................................... 2.4AhLithium-ion Charging time:................................................................3.5hr MaximumTemperature:............................................... 6000C OperatingTime:........................................................... 40min Power Rating:.................................................................30W Consumables:Seefig.1andtablebelow.

SDL11Issue2(3)26/08/22Original Language Version Jack Sealey Limited

Refer to instructions

Warning: Hot surfaces

Do not cover Wear eye protection

Item Description Part number

1 SolderingwireforSDL11 SDL11.SW

2 ChargingcordforSDL11 SDL11.CC

3 SolderingstandforSDL11 SDL11.S

4 30W Chisel tip SDL11.CHT

5 Cleaning sponge SDL11.CS

6 30W Cone tip SDL11.CT

7 30W Lighter and heat shrink tip SDL11.LHT

8 Interchangeabletips(setof3)NOTSHOWN SDL11.T

9 TransparentcapforSDL11NOTSHOWN SDL11TC fig.1

Indooruse only

4. OPERATION 4.1. CHANGING SOLDERING TIP 4.1.1. Ensure that the soldering iron tip is cold, select the appropriate tip and remove the current tip by applying a quarter turn to the tip

collar.Mounttherequiredtipbyliningupthelugs,slidingthecollardownthetoolandapplyingaquarterturn. 4.2. CHARGING 4.2.1. WhenconnectedtoaUSBpowersupplytheLEDinthehandlewillshowredwhilechargingandwillturngreenwhenfullycharged. 4.3. USING THE SOLDERING IRON 4.3.1. SlidetheHeatingandLEDcontrolslider(fig.2)forwardtopreparethetoolforsoldering. 4.3.2. DepresstheredbuttonontopoftheslidecontroltoheatthetipandtoturnontheLED.Whiletheredbuttonisdepressedthetip

willcontinuetoheat.Ifthebuttonisreleasedthepoweriseffectivelyswitchedoff. 4.3.3. WhentheworkisdoneensurethattheHeatingandLEDcontrolsliderisreturnedtotheOffposition(fig.2)andthatthetipiscold

beforestoringtheironbackinitsbox.

5. MAINTENANCE 5.1. Ifsoiled,cleanthetoolusingusingaclean,dampcloth.DO NOTgetthetoolwet.

Original Language Version Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids accordingtolocalregulations.

WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE).Whentheproductisnolongerrequired,itmustbedisposedofinanenvironmentallyprotectiveway.Contactyourlocalsolid wasteauthorityforrecyclinginformation.

BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containingbatteries(asdefinedwithintheseregulations),thattheyareregisteredwithValpaksregisteredcompliancescheme.Jack SealeyLtdsBatteriesProducerRegistrationNumber(BPRN)isBPRN00705.

Partssupportisavailableforthisproduct.Pleaseemailsales@sea

Manualsnet FAQs

If you want to find out how the SDL11 Sealey works, you can view and download the Sealey SDL11 Soldering Iron Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey SDL11 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey SDL11. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey SDL11 Soldering Iron Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey SDL11 Soldering Iron Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey SDL11 Soldering Iron Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey SDL11 Soldering Iron Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey SDL11 Soldering Iron Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.