Sealey SPP01.V2 Solar Panel Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey SPP01.V2 Solar Panel Instruction Manual PDF

SOLAR PANELS MODEL NOS: SPP01.V2 (12V/1.5W), SPP02.V1 (12V/2.4W), SPP03.V2 12V/4.8W

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY 9 Observe standard safety procedures when using these items. DANGER! - Beware, lead-acid batteries generate explosive

gases during normal battery operation. 9 If the battery terminals are corroded or dirty, clean them before

attaching the clips. 9 Removeillfittingclothing.Removeties,watches,ringsand

other loose jewellery. Contain, or tie back, long hair when working near batteries.

9 Keep children and unauthorised persons away from connections. WARNING!: DO NOT use solar panels on any vehicles other than

those with12Volt DC systems. 8 DO NOT dis-assemble solar panel. The solar panel must be

checkedbyqualifiedservicepersonnelonly. 8 DO NOT get solar panel wet or use in damp locations or areas

where there is condensation. 8 DO NOT use the solar panel for any purpose other than for which

it is designed. 8 DO NOT pull the cables or clips from the battery terminals. 8 DO NOT operate the solar panel if damaged. 9 When not in use store in a safe, dry, childproof location.

2. INTRODUCTION Amorphous solar panels convert daylight directly into 12V electricity. Suitable for maintaining charge in a wide range of batteries and power packs. Ideal for batteries stored in boats and caravans and for batteries in vehicles in long-term storage. IP44 Rating (non-waterproof). For use behind car windscreen or other protection. Supplied with battery clips and vehicle accessory socket plug (only suitable for vehicles with permanent live accessory socket).

3. SPECIFICATION Model no: ..............................................................SPP01.V2 Output: ................................................................... 12V/1.5W Dimensions: ......................................................350 x 125mm IP Rating .........................................................................IP44 Model No. ..............................................................SPP02.V1 Output .................................................................... 12V/2.4W Dimensions: ......................................................375 x 215mm IP Rating: ........................................................................IP44 Model no: ..............................................................SPP03.V2 Output: ................................................................... 12V/4.8W Dimensions: ......................................................440 x 345mm IP Rating .........................................................................IP44

4. OPERATION 4.1. INSTALLATION 4.1.1. Insertthesuctioncups(SPP01.V2,SPP02.V1only)intothepre-drilledendsofthesolarpanelensuringthattheyaresecurelyfixed.

Choose a clean, dry surface, facing the sun, then dampen suction cups and mount to vehicles dash or windscreen. 4.2. CONNECTION THROUGH VEHICLE ACCESSORY SOCKET (Only suitable for vehicles with permanent live accessory

socket) 4.2.1. Attach the auxiliary adaptor lead to the solar panel lead. Plug the male-end of the auxiliary adaptor (12V plug) into the female auxiliary

socket (in the vehicle) making sure that both ends are secure and aligned correctly. For optimal charging power, ensure the panel (solar cell up) is directly facing the sun. For vehicles that do not have permanent live accessory sockets refer to:

SPP01.V2, SPP02.V1, SPP03.V2 Issue:3 (3,4) 11/06/20Original Language Version Jack Sealey Limited

Refer to instruction

manual

Connect to any 12V auxiliary power outlet

Connect directly to battery using DC cables

Con ect to any 12V auxiliary power outlet

t i tl t tt i l

4.3. WATERTIGHT HARDWIRED TERMINAL CONNECTOR (SPP01.A) FOR SPP01.V2, SPP02.V1 AND SPP03.V2 (NOT SUPPLIED), SEE BELOW.

4.4. BATTERY CONNECTION NOTE: Check the battery is 12V DC. DO NOT use with a 24V battery. 4.4.1. Attach the battery clip lead to the solar panel lead. 4.4.2. Ensure the battery terminals are clean, if necessary clean away any corrosion. 4.4.3. Clip the red (+) crocodile clip to the red (+) terminal post on the battery. 4.4.4. Clip the black (-) crocodile clip to the black (-) terminal post on the battery.

WARNING!:Whendisconnectingremovetheblack(-)clipfromthebatteryfirstthenremovethered(+)clip. 4.4.5. Batteryterminalconnectionleadwithin-linefuseunitandweatherproofcaptoofferprotectionfromwateringresswhentheconnector

is not in use. Can be left on the vehicle and simply connected to SPP01.V2, SSP02.V1 and SPP03.V2 when required. WARNING!: The clips MUST be placed on to the battery in the aforementioned order, wrong connections may cause sparking or

explosion. NOTE: This solar panel has a built-in blocking diode that protects the battery from reverse discharge. NOTE: The use of the solar panel is not recommended while the vehicle is in use. NOTE: The solar panel is not weatherproofed - DO NOT use in wet or use in damp locations.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Original Language Version Jack Sealey Limited

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505. Importan

Manualsnet FAQs

If you want to find out how the SPP01.V2 Sealey works, you can view and download the Sealey SPP01.V2 Solar Panel Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey SPP01.V2 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey SPP01.V2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey SPP01.V2 Solar Panel Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey SPP01.V2 Solar Panel Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey SPP01.V2 Solar Panel Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey SPP01.V2 Solar Panel Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey SPP01.V2 Solar Panel Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.