Sealey SSP11ER.V2 Shield Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey SSP11ER.V2 Shield Instruction Manual PDF

BROW GUARD AND FULL FACE SHIELD MODEL NO: SSP11E.V2, SSP11ER.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY 9 This face shield is designed for face and eye protection against high speed particles of low energy impact. The visor is designed to

be lightweight and comfortable to wear. 9 The product protects against high speed particles worn over standard ophthalmic spectacles, but may transmit impacts, thus creating

a hazard to the wearer. 9 Avoid liquids as small particles can splash into the eyes. 9 Inspect the face shield frequently as a pitted or scratched face shield reduces vision and should be replaced immediately. 9 When necessary, use identical replacement parts contact your Sealey stockist. 8 DO NOT use if any part of the face shield is cracked or broken. 8 DO NOT place this product on a hot surface. 8 DO NOT use this face shield for protection against short circuit electric spark, fine dust, gas, ultra violet or infra red radiation,

ionising radiation, liquids under pressure or other severe hazards. 8 DO NOT use this face shield against heavy impact hazards. 8 DO NOT use this face shield for welding.

2. INTRODUCTION Ratchet adjustable headband with brushed nylon comfort band. Suitable for automotive, agricultural and industrial applications. Conforms to EN 166, Optical class 1, impact grade B.

3. SPECIFICATION Model No: ............................................................SSP11E.V2 Consumables Replacement visor ............................................SSP11ER.V2 Lens Type: ..................................................................... clear

4. ASSEMBLY Refer to picture overleaf 4.1. Locate central hole of visor onto the central spigot of brow guard and lock in place by rotating the spigot. 4.1.1. Gently fold the visor around the lip of the brow guard such that its outer slots align with outer spigots on brow guard. Lock in

place by rotating the spigots. 4.1.2. Carefully remove the plastic protective sheet from the faces of the visor. 4.2. FITTING VISOR NOTE: It is imperative that the brow guard fits well and comfortably for the user or else slippage and discomfort may arise. 4.2.1. Initially adjust height adjustment band to suit head size by un-clipping/adjusting the band. 4.2.2. Use thumbscrew on the rear of the head band to make fine adjustment of circumference of the head band. 4.2.3. To adjust the angle of the face mask with respect to the brow guard, use the thumbscrews on either side of the brow guard to set the

angle. Tighten in position when adjusted accordingly.

5. CLEANING & DISINFECTION 8 DO NOT USE abrasive materials.

5.1. Using a soft and clean brush or cloth, use warm suds to wash and clean. Ensure hands are clean (without grease). 5.2. Materials which may come into contact with the wearers skin could cause allergic reactions to susceptible individuals. The contact

areas should be disinfected regularly.

6. MAINTENANCE 6.1. The visor should be periodically inspected and cleaned to keep it clear. In case damage or damage to the visor, please replace. 6.2. Ensure a correctly specified lens is fitted as a replacement (refer to Specification section). Ensure hands are clean (without grease)

while fitting the lens.

SSP11E.V2, SSP11ER.V2 Issue 1 03/11/20Original Language Version Jack Sealey Limited

Refer to instructions

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

7. STORAGE 7.1. Store in a bag or case out of direct sunlight, aw

Manualsnet FAQs

If you want to find out how the SSP11ER.V2 Sealey works, you can view and download the Sealey SSP11ER.V2 Shield Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey SSP11ER.V2 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey SSP11ER.V2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey SSP11ER.V2 Shield Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey SSP11ER.V2 Shield Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey SSP11ER.V2 Shield Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey SSP11ER.V2 Shield Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey SSP11ER.V2 Shield Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.