Sealey SSP10ER Shield Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey SSP10ER Shield Instruction Manual PDF

DELUXE BROW GUARD WITH ASPHERICAL POLYCARBONATE FULL FACE SHIELD MODEL NO: SSP10E, SSP10E/R

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY 9 This face shield is designed for face and eye protection against high speed particles of low energy impact. The visor is designed to

be lightweight and comfortable to wear. 9 The product protects against high speed particles worn over standard ophthalmic spectacles, but may transmit impacts, thus creating

a hazard to the wearer. 9 Avoid liquids as small particles can splash into the eyes. 9 Inspect the face shield frequently as a pitted or scratched face shield reduces vision and should be replaced immediately. 9 When necessary, use identical replacement parts contact your Sealey stockist. 8 DO NOT use if any part of the face shield is cracked or broken. 8 DO NOT place this product on a hot surface. 8 DO NOT use this face shield for protection against short circuit electric spark, fine dust, gas, ultra violet or infra red radiation, ionising

radiation, liquids under pressure or other severe hazards. 8 DO NOT use this face shield against heavy impact hazards. 8 DO NOT use this face shield for welding.

2. INTRODUCTION Ratchet adjustable headband with brushed nylon comfort band. Competitive quality for automotive, agricultural and industrial applications. Can be used with standard glasses. Conforms to EN 166, Optical class 1, Impact grade F.

3. SPECIFICATION MODEL NO: ...........................................SSP10E/SSP10ER Consumable Parts: ................Replacement visor: SSP10E/R Lens Type: .................................................................... Clear Operation temperature ......................................-5C ~ +55C Storage temperature .......................................-20C ~ +70C

4. ASSEMBLY 1 Frame 2 Headgear height adjustment 3 Headgear tightness adjustment 4 Headgear angle adjustment 5 Visor fixture 6 Lens 7 Aluminium edge

4.1. ASSEMBLY 4.1.1. Locate central hole of face shield and pass a spigot through the lens and into the brow guard. Lock in place by rotating the spigot. 4.1.2. Gently fold the face shield around the brow guard. Lock in place the remaining spigots by rotating them. 4.1.3. Carefully remove the plastic protective sheet from both faces of the lens. 4.2. FITTING BROW GUARD NOTE: It is imperative that the brow guard fits well and comfortably for the user or else slippage and discomfort may arise. 4.2.1. Headgear height adjustment: Initially adjust top band to suit head size by un-clipping the band and size to suit. Re-clip the band

when sized appropriately. 4.2.2. Head gear tightness adjustment (circumference): Use thumbscrew on the rear of the head band to make fine adjustment of

circumference of the head band. 4.2.3. Headgear angle adjustment: To adjust the angle of the face mask with respect to the brow guard, use the thumbscrews on either

side of the brow guard to set the angle. Tighten in position when adjusted accordingly.

SSP10E, SSP10E/R Issue 1 02/10/20Original Language Version Jack Sealey Limited

Refer to instructions

5. CLEANING & DISINFECTION 8 DO NOT USE abrasive materials.

5.1. Using a soft and clean brush or cloth, use warm suds to wash and clean. Ensure hands are clean (without grease). 5.2. Materials which may come into contact with the wearers skin could cause allergic reactions to susceptible individuals. The contact

areas should be disinfected regularly.

6. MAINTENANCE 6.1. The visor should be periodically inspected and cleaned to keep it clear. In case damage or damage to the visor, please replace. 6.2. Ensure a correctly specified lens is fitted as a replacement (model no. SSP10E/R). Ensure hands are clean (without grease) while

fitting the lens.

7. STORAGE 7.1. Store in a bag or case out of direct sunlight, away from chemicals and abrasive substances, in a clean dust free environment. Use

original bag for transportation if possible.

Original Language Version Jack Sealey Limited

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

EN

Manualsnet FAQs

If you want to find out how the SSP10ER Sealey works, you can view and download the Sealey SSP10ER Shield Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey SSP10ER as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey SSP10ER. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey SSP10ER Shield Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey SSP10ER Shield Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey SSP10ER Shield Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey SSP10ER Shield Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey SSP10ER Shield Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.