Sealey SCR15 Seat Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey SCR15 Seat Instruction Manual PDF

GAS SPRUNG MECHANICS SEAT model no: SCR10.V2 and SCR15

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAfETy WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this seat. 9 locate seat in a suitable working area. WARNING! Use the seat on level and solid ground, preferably concrete. 9 Keep the seat clean and tidy in accordance with good workshop practice. 8 DO NOT use the seat for any purpose other than that for which it is designed. 8 DO NOT stand on the seat. 8 DO NOT use the seat outdoors. 8 DO NOT get the seat wet or use in damp or wet locations or areas where there is condensation. 8 DO NOT clean the seat with any solvents which may damage the paint surface or the protective coating on the padded seat. 8 DO NOT exceed maximum capacity of 136kg.

2. INTRODUCTION Swivel action seat with lever operated gas sprung height adjustment between 380mm and 500mm. Padded cushion for added comfort. Seat glides across workshop floor on five 60mm ball bearing castors. Base doubles as temporary tool and component storage tray.

3. SPECIfICATION

Model No: .............................................................. SCR10 ..................................... SCR15 max. Capacity ......................................................... 136kg ......................................... 136kg minimum Height: ................................................... 380mm ..................................... 380mm maximum Height:.................................................... 500mm ..................................... 500mm Gas Strut nitrogen approximate quantity ............... 3g ..................................................... 3g

4. ASSEMBLy 4.1. If the 5 swivel castors, 5 domed head nuts and 5 plain washers are not fitted, invert the seat on to a non-scratch clean surface and fit

the five castors. 4.2. If the swivel castors are fitted, check the fixings for tightness and tighten if necessary.

5. OPERATION 5.1. To lower: sit lightly on the stool and lift the operating lever; the stool will lower until the lever is released. 5.2. To raise: remove weight from seat. lifting the operating lever will allow the seat to raise.

6. MAINTENANCE 6.1. If in constant use, check the tightness of the domed head nuts on a quarterly basis. 6.2. Smear the castor bearings and the gas cylinder rod with a thin film of silicone grease annually. 6.3. The castor wheels are maintenance free; ensure they are able to rotate and swivel freely. 6.4. Clean the seat cushion and trays with a moist cloth and mild detergent.

SCR10.V2, SCR15 | Issue 1 20/03/18Original Language Version Jack Sealey limited

Refer to instructions

SCR15 SCR10

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. <

Manualsnet FAQs

If you want to find out how the SCR15 Sealey works, you can view and download the Sealey SCR15 Seat Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey SCR15 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey SCR15. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey SCR15 Seat Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey SCR15 Seat Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey SCR15 Seat Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey SCR15 Seat Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey SCR15 Seat Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.