Sealey CST980.V2 Sack Truck Instruction Manual PDF

Download download
Sealey CST980.V2 Sack Truck Instruction Manual PDF
Sealey Manual Sealey Sack Truck Manual Sealey CST980.V2 Manual Sealey Sack Truck Instruction Manual
Pages 2
Year 0
Language(s)
English en
1 of 2
1 of 2

Summary of Content for Sealey CST980.V2 Sack Truck Instruction Manual PDF

Page 1

90KG FOLDING SACK TRUCK MODEL NO: CST980.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY.

1. SAFETY

9 Always load evenly with the centre of gravity of the load as near the centre of the truck as possible. 9 Obtain additional support for large or wide loads to prevent tipping. 8 DO NOT overload the truck - see Specifications. 8 DO NOT leave unattended, especially when loaded, unless the wheels are chocked or the truck is otherwise secured. 8 DO NOT use truck on uneven ground and do not run over curbs or steps - use a ramp. 8 DO NOT allow others to ride on the truck. 8 DO NOT use the truck if any part is significantly damaged - pay particular attention to the wheels.

2. INTRODUCTION Lightweight aluminium frame, weighs only 7kg yet has a carrying capacity of 90kg. Folding steel foot plate and telescopic handle with spring release means that trolley can be packed away in seconds. Large back support makes light work of oversized loads. Fitted with 150mm wheels for easy-rolling over rough ground. Ideal for business and home use.

3. SPECIFICATION Model no ..............................................................CST980.V2 Height(s) ........................................................... 710-1080mm Overall width .............................................................. 395mm Platform depth............................................................ 240mm Wheel depth ............................................................ 150mm

4. INTRODUCTION Lightweight aluminium frame, weighs only 7kg yet has a carrying capacity of 90kg. Folding steel foot plate and telescopic handle with spring release means that trolley can be packed away in seconds. Large back support makes light work of oversized loads. Fitted with 150mm wheels for easy-rolling over rough ground. Ideal for business and home use.

5. ASSEMBLY 5.1. Make sure the axle is clean from dust and dirt to allow free movement of the wheel. 5.2. Placethesleeve(fig.1.2)ontotheaxle(fig.1.1),asfarasitwillgo. 5.3. Slidethewheel(fig.1.3)ontotheaxle,andcompletebypushingthepin(fig.1.4)through the hole in the end of the axle. 5.4. Repeat the operation for the other side.

6. OPERATION 6.1. Firstlyfolddownthefootplatereadytoacceptaload(fig.2). 6.2. Toextendthehandlepushthespringloadedlockingbarforward(fig.2A)andliftthe handle upwards until it latches in its fully extended position. 6.3. To lower the handle, push the spring loaded locking bar forward and push the handle downwards until it latches in the closed position. 6.4. After use close the handle, fold up the foot plate and store in a safe dry place. 6.5. Only use truck with handle fully closed or fully extended.

Refer to instruction

manual

Original Language Version Jack Sealey Limited

fig.1

fig.2

CST980.V2 Issue:2 (HF) 21/01/21

Page 2

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Please note that other versions of this product are availa

Manualsnet FAQs

If you want to find out how the CST980.V2 Sealey works, you can view and download the Sealey CST980.V2 Sack Truck Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey CST980.V2 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey CST980.V2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey CST980.V2 Sack Truck Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey CST980.V2 Sack Truck Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey CST980.V2 Sack Truck Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey CST980.V2 Sack Truck Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey CST980.V2 Sack Truck Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.