Sealey CST800.V2 Sack Truck Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey CST800.V2 Sack Truck Instruction Manual PDF

150KG FOLDABLE TOE SACK TRUCK WITH PNEUMATIC TYRES MODEL NO: CST800.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY 9 Always load evenly with the centre of gravity of the load as near the centre and rear of the plate as possible. 9 Obtain additional support for large or wide loads to prevent tipping. 8 DO NOT overload the truck - see Specification. 8 DO NOT leave unattended, especially when loaded, unless the wheels are chocked or the truck is otherwise secured. 8 DO NOT use truck on uneven ground and do not run over curbs or steps - use a ramp. 8 DO NOT allow others to ride on the truck. 8 DO NOT use the truck if any part is damaged, paying particular attention to the wheels.

2. INTRODUCTION Manufactured from strong tubular steel with heavy-duty pneumatic tyres for transportation over rough terrain. Features foldaway toe plate providing increased loading area. Ideal for delivery drivers, farmers or builders.

3. SPECIFICATION Model No. ..............................................................CST800.V2 Capacity ..........................................................................150kg Wheel Size .................................................................250mm Wheel Width ....................................................................90mm Height ..........................................................................1140mm Overall Width .................................................................490mm Platform Depth .........................................................90/420mm

4. ASSEMBLY 4.1. WHEELS 4.1.1. Ensure each axle is clean from dust and dirt to allow free movement of the

wheel. 4.1.2. Slide the wheel (fig.1.2) onto the axle (fig.1.1), followed by the washer (fig.1.3)

and complete by pushing the split pin (fig.1.4) through the hole in the end of the axle and bending over to retain.

4.1.3. Repeat for the other side. 4.2. TOE PLATE 4.2.1. If the toe plate is not already attached, do so using the bolts, washers and nuts

supplied. 4.2.2. Attach at the bottom of the truck as in Fig.2.1

5. OPERATION 5.1. Check and inflate the tyres. DO NOT inflate above 30psi. 5.2. Fold down the toe plate ready to accept a load. (See fig.2)

8 DO NOT overload the sack truck. DO NOT try to carry loads that make the truck unstable.

5.3. Slowly lean the sack truck backwards to take the weight of the load. 5.4. Proceed at a safe speed especially at corners where there could be a danger of the

load shifting. 5.5. Extra care should be taken on inclined surfaces. 5.6. Where there is a curb or step, a ramp should be used. 5.7. After use fold up the toe plate and store in a safe dry place. 5.8. Periodically check all fittings are tight and the wheel split pins are secure.

fig.1

fig.2

CST800.V2 Issue 1 22/07/19Original Language Version Jack Sealey Limited

Refer to instructions

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually impr

Manualsnet FAQs

If you want to find out how the CST800.V2 Sealey works, you can view and download the Sealey CST800.V2 Sack Truck Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey CST800.V2 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey CST800.V2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey CST800.V2 Sack Truck Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey CST800.V2 Sack Truck Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey CST800.V2 Sack Truck Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey CST800.V2 Sack Truck Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey CST800.V2 Sack Truck Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.