Sealey AP6150.V3 Rack Instruction Manual PDF

RACKING UNIT WITH 5 SHELVES (150KG CAPACITY PER LEVEL) model no: AP6150.V3 & AP6150GS.V3

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING! ensure Health & Safety, and local authority regulations are adhered to when assembling and using this rack. 9 locate rack in a suitable area where it will not be an obstruction. 9 Keep the general area clean, uncluttered and ensure there is adequate lighting. WARNING! erect rack on a level and solid surface such as concrete. 9 Keep children and unauthorised persons away from the storage area. 8 DO NOT use the rack for any purpose other than that for which it is are designed. 8 DO NOT site the rack out of doors. 8 DO NOT get the rack wet or use in damp or wet locations or areas where there is condensation. 8 DO NOT clean the shelf supports with any solvents which may damage the surface. 9 ensure that the rack is properly assembled before loading them with heavy items. WARNING! maximum load for each shelf is 150kg. 9 Where possible the rack should be fixed to the wall with suitable fixings 9 Place heavier items on the lower shelves. 9 Heavier items should be evenly distributed across the shelves.

2. INTRODUCTION Steel/galvanised frame with five mdF shelves (AP6150 painted/AP6150GS galvanised). 150kg capacity per level giving a maximum capacity of 750kg per rack. no nuts and bolts for easy assembly. Clips together in minutes. Two piece uprights allow use as a single bay rack, or split in two separate shelf systems or workstations.

3. SPECIFICATION model no......................... ...............AP6150.V3/AP6150GS.V3 Coating...................................... .................... Paint/Galvanised Height.................................. ........................................1800mm Width..................................... ........................................800mm depth..................................... ........................................300mm Weight ............................................................................... 11kg Capacity per shelf ............................................................150kg

4. CONTENTS Carefully unpack the product and check the contents against the list below. Should any items be missing or damaged make immediate contact with your Sealey stockist.

Original Language Version Jack Sealey limited

Refer to instructions

Wear protective gloves

AP6150.V3, AP6150GS.V3 | Issue 1 07/11/18

5. a ASSEMbLY

5.1. 5.2. 5.3.

.

Original Language Version Jack Sealey limited

decide on height of lowest shelf. Use shelf to support uprights B.

Refer to Step1B below.

Build ends first by joining B sections together refer to Step 2B

Use soft hammer/mallet to tap down horizontal supports. Use screwdriver to bend tabs down.

Joining pieces

AP6150.V3, AP6150GS.V3 | Issue 1 07/11/18

Step 1 Step 2

Step 1b

Step 2b

Sealey Group, Kempson Way, Suffolk business Park, bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: no liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

AP6150.V3, AP6150GS.V3 | Issue 1 07/11/18Original Language V