Sealey VS660 Plug Instruction Manual PDF

1 of 1
1 of 1

Summary of Content for Sealey VS660 Plug Instruction Manual PDF

DRAIN PLUG REPAIR SET

MODEL NO: VS660 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools.

8 DO NOT use tools if damaged. 9 Maintain tools in good and clean condition for best and safest

performance. 9 Ensure that a vehicle which has been jacked up is adequately supported with axle stands. 9 Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist. 9 Wear suitable clothing to avoid snagging. DO NOT wear jewellery and tie back long hair. 9 Account for all tools and parts being used and do not leave any in or near the engine.

2. INTRODUCTION Superb for repairing sump, gearbox and differential drain plug threads. Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer (supplied). Set is suitable for the most popular threads used on cars and light commercial vehicles. Supplied in storage case.

3. SPECIFICATION Model No: ................................................................... VS660 Tap Sizes: ....M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5mm

4. OPERATION 4.1. To repair a damaged drain plug thread first establish the thread size of the damaged plug then choose a tap that is slightly larger than the

existing thread. 4.2. Mount the tap in a suitable tap wrench and lightly oil it. 4.3. Introduce the tap into the damaged sump hole ensuring that it enters in line with the hole. Rotate the tap until it begins to bite then

advance it a half turn and back it off by a quarter turn. 4.4. As thread cutting proceeds periodically remove the tap and clean it to prevent a build up of metal shavings being deposited in the sump. 4.5. Proceed until the tap is running freely in the hole then remove it. 4.6. Fit the appropriate sump plug and washer and tighten. 4.7. After the next use of the vehicle check that the plug and washer are oil tight.

Refer to instruction

manual

Wear eye protection

VS660 Issue:2 (H,F) 23/02/22Original Language Version Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids accordin

Manualsnet FAQs

If you want to find out how the VS660 Sealey works, you can view and download the Sealey VS660 Plug Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey VS660 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey VS660. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey VS660 Plug Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey VS660 Plug Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey VS660 Plug Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey VS660 Plug Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey VS660 Plug Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.