Sealey AK9821 Metal Punch Instruction Manual PDF

1 of 1
1 of 1

Summary of Content for Sealey AK9821 Metal Punch Instruction Manual PDF

14PC METAL PUNCH SET MODEL NO: AK9821

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY

WARNING! Ensure that Health and Safety, local authority and general workshop practice regulations are adhered to when using this product.

8 DO NOT use this product if it is damaged. 9 Maintain tools in good and clean condition for best and safest performance. 9 Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist. 9 Wear suitable clothing to avoid snagging. Do not wear loose jewellery and tie back long hair. 8 DO NOT operate punch if you are tired or under the influence of alcohol, drugs or intoxicating medication.

2. INTRODUCTION Heavy-duty drop-forged and heat treated steel punch body with compound lever action. Suitable for precision punching of holes in steel, aluminium, brass, copper and plastic. Fitted with gauge for depth adjustment up to 50mm. Suitable for materials up to 14 gauge. Punches and dies hardened to 55-60 HRC. Supplied in storage case.

3. SPECIFICATION Model no ................................................................... AK9821 Punch & Die Sizes ............................. 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32

4. OPERATION Note: Numbers in brackets refer to fig.1. 4.1. Dies (1) are screwed into the lower throated handle (2) using the die key (3). 4.2. To replace a punch (4), remove the pivot arm screw (5) and lift the upper pivot handle (6). 4.3. Pull the upper pivot handle (6) and pivot arm (7) back away from the punch. 4.4. Lift out the punch (4). 4.5. Installation of a punch is the reverse of paragraphs 4.2 to 4.4 ensuring the grooved sides of the punch align with the slotted portion of the pivot arm. 4.6. Set the throat depth gauge (8) by undoing the screw, adjusting the gauge as required and re-tightening the screw.

5. MAINTENANCE 5.1. Oil the pivot points, die and punch holes in the lower handle, to avoid excess wear. 5.2. Keep the punches and dies well lubricated.

Refer to instruction

manual

Wear eye protection

AK9821 Issue:2 (H,F) 18/11/20Original Language Version Jack Sealey Limited

fig.1

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dis

Manualsnet FAQs

If you want to find out how the AK9821 Sealey works, you can view and download the Sealey AK9821 Metal Punch Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey AK9821 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey AK9821. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey AK9821 Metal Punch Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey AK9821 Metal Punch Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey AK9821 Metal Punch Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey AK9821 Metal Punch Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey AK9821 Metal Punch Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.