Sealey DF760.V2 Metal Folder Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey DF760.V2 Metal Folder Instruction Manual PDF

BENCH MOUNTING SHEET METAL FOLDER 760MM MODEL NO: DF760.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY 9 Wear approved safety goggles when operating. Your local Sealey stockist offers a complete range of safety equipment. 9 Use the tool only for its intended purpose. 9 Check regularly for damaged parts. DO NOT use if any of its components are broken, worn or damaged. 9 Use original Sealey spare parts and accessories. Use of non-recommended spare parts may be dangerous and will invalidate

warranty. 8 DO NOT operate this tool while under the influence of drugs, alcohol or other impairing medication. 8 DO NOT Allow unqualified persons to operate the metal folder. Keep children away from the tool.

2. i INTRODUCTION Bench mounted sheet metal folder, fitted with mounted plates. Capable of bending up to 17 gauge steel sheet. Ideal for the small garage or restoration operation.

3. i SPECIFICATION Maximum sheet size: .....................................................760mm Maximum sheet thickness: ..........................................17gauge Maximum bending angle: .................................................... 900

Length of unit: ................................................................800mm Width of unit: .................................................................150mm Height of unit: ..................................................................73mm

4. CONTENTS & ASSEMBLY 4.1. Unpack the unit and check that all parts are included and not damaged. Should you experience a problem contact your supplier

immediately. NOTE: Numbers in brackets refer to item numbers on the parts diagram. 4.2. The stand (1) should be secured to a work bench using the mounting holes and 4 bolts (3/8 diameter). 4.3. Each handle ball (7) should be attached to the handle lever (6) and the handle levers should be placed into the pins (5).

5. OPERATION 5.1. To use the bender, lower the handle lever until the moving plate is parallel to the work bench. Position the material to be bent on the

supporting plate (2) and the moving plate (4) and properly align with the edge to be bent up against the back edge of the supporting plate. 5.2. Place and secure the pressing plate (3) on top of the supporting plate with the back edge of pressing plate aligned with back

edge of supporting plate. Suitable clamps (not included) are required to secure the pressing plate. For our full range of clamps see www. sealey.co.uk

5.3. Raise the two handle levers to bend the material to the desired angle. 5.4. When the folder is not in use, it should be covered and stored in a dry location.

Original Language Version Jack Sealey Limited

Refer to instruction

manual

Wear protective gloves

Wear eye protection

Wear protective clothing

Wear protective footwear

Item Part No. Description

1 DF760.V2-01 Stand complete (includes items 1, 2, 4, 5)

3 DF760.V2-03 Pressing Plate

6 DF760.V2-06 Handle lever

7 DF760.V2-07 Handle knob

DF760.V2 Issue No: 4 01/03/21

Original Language Version Jack Sealey Limited DF760.V2 Issue No: 4 01/03/21

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from

Manualsnet FAQs

If you want to find out how the DF760.V2 Sealey works, you can view and download the Sealey DF760.V2 Metal Folder Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey DF760.V2 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey DF760.V2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey DF760.V2 Metal Folder Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey DF760.V2 Metal Folder Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey DF760.V2 Metal Folder Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey DF760.V2 Metal Folder Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey DF760.V2 Metal Folder Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.