Sealey DF600.V2 Metal Folder Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey DF600.V2 Metal Folder Instruction Manual PDF

bench mounted metal folder model no: df600.V2

thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SafetY 9 Wear approved safety goggles when operating. Your local Sealey stockist offers a complete range of safety equipment. 9 Use the tool only for its intended purpose. 9 Check regularly for damaged parts. do not use if any of its components are broken, worn or damaged. 9 Use original Sealey spare parts and accessories. Use of non-recommended spare parts may be dangerous and will invalidate

warranty. 8 do not operate this tool while under the influence of drugs, alcohol or other impairing medication. 8 do not Allow unqualified persons to operate the metal folder. Keep children away from the tool.

2. introduction Suitable for mounting in a sturdy bench mounted vice and capable of bending up to 22 gauge steel sheet. Suitable for small garage or restoration operation.

3. Specifications

model no: .................................................................. dF600.V2 Capacity: ......................600mm x 22 gauge sheet, 2mm rod. max. width of 14 gauge (2mm) steel sheet strip: ...........100mm Weight: ...........................................................................9.13kg

note: When bending 14 gauge (2mm) strip or 2mm steel rod, they must be placed close to one of the set screws.

4. contentS 4.1. Unpack and check that all parts are included and not damaged. Contents: 1 x main frame, 2 x handles, 1 x folding plate, 2 x set screws l - shaped. 4.2. Attach the top plate using the L-shaped set screws (fig1.3). 4.3. Screw the two lever handles (fig1.1) tightly into the threaded sockets of the folding plate (2) these should now face toward you. 4.4. ensure the assembled folder is parallel and tight in the vice. 4.5. Re-check your installation before use.

5. operation.

5.1. ensure the unit is securely held in the vice. 5.2. Insert a test piece of sheet metal in the folder. 5.3. Secure the sheet between the folding lips by tightening the two l-shaped set screws (3) to secure the metal. 5.4. Firmly grip the two handles and raise the folder to create the fold. 5.5. When satisfied with the test results, proceed with the actual workpiece. 5.6. Repeat the above steps 5.1 - 5.4 for each new workpiece.

.

Refer to instruction

manual

Wear protective

gloves

Wear eye protection

Original Language Version Jack Sealey limited

fig.1

dF600.V2 | Issue: 2(H,F) 09/05/18

Original Language Version Jack Sealey limited

Sealey Group, Kempson Way, Suffolk business park, bury St edmunds, Suffolk. ip32 7ar 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. important: no liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

enVironment protection Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and

Manualsnet FAQs

If you want to find out how the DF600.V2 Sealey works, you can view and download the Sealey DF600.V2 Metal Folder Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey DF600.V2 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey DF600.V2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey DF600.V2 Metal Folder Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey DF600.V2 Metal Folder Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey DF600.V2 Metal Folder Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey DF600.V2 Metal Folder Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey DF600.V2 Metal Folder Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.