Sealey LED317 Inspection Lamp Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey LED317 Inspection Lamp Instruction Manual PDF

RECHARGEABLE 3W COB + 3W LED INSPECTION LAMP MODEL NO: LED317

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY 1.1. GENERAL SAFETY

9 Ensure the lamp is fully charged before initial use. 8 DO NOT turn the lamp on when it is being charged. 8 DO NOT shine directly into your, another persons or an animals eyes. 8 DO NOT allow children to use the lamp. 8 DO NOT handle or move the lamp whilst it is being charged. 8 DO NOT use the lamp if you suspect that the battery or the lamp casing is damaged. 8 DO NOT leave battery in a discharged state, recharge battery immediately. Before storage, fully recharge the battery, subsequently

recharge the battery at least once every six months of non-use.

1.2. BATTERY SAFETY WARNING! To reduce the risk of burns or fire: 8 DO NOT attempt to open, disassemble, modify or service the battery pack. 8 DO NOT crush, puncture, short external contacts or dispose of in fire or water. 8 DO NOT expose to temperatures above 60C (140F). 9 Recycle or dispose of used battery as stipulated by local regulation. 9 If the electrolyte in the cells gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with cool

water and seek immediate medical attention.

2. i INTRODUCTION Mini, lightweight lamp. 3W COB lamp produces up to 250 lumens. 3W LED Torch produces up to 100 lumens. Integral hanging hook and belt clip. Magnetic base which can rotate 180. Battery level indicator. Rechargeable 3.7V 1.2Ah Li-ion battery. Operating Time: 3hr. Micro USB charging port. Supplied with USB cable.

3. i SPECIFICATION Model No: ................................................................. LED317 Battery .......................................................3.7V 1.2 Ah Li-ion Charging Time ................................................................2.5hr IP Rating ........................................................................ IPX4 LED Qty ........................................................ 1 COB + 1 LED Length ........................................................................ 155mm Lumen Outputs ................................................... 250 / 100lm Operating time ..................................................................3hr Net Weight .................................................................. 1.32kg

IMPORTANT WARRANTY INFORMATION The battery fitted to this lamp is considered to be a consumable item and its ability to accept a charge will reduce over time. We will provide warranty against mechanical and electrical defect for a period of one year - this DOES NOT cover fair wear and tear. If the battery is not properly charged before first use, or regularly conditioned, its capacity will diminish. Under these circumstances we will not replace the battery regardless of whether it is less than one year old.

LED317 Issue 1 30/05/18Original Language Version Jack Sealey Limited

Refer to instruction

manual

4. OPERATION Refer to fig.1 4.1. Connect the USB lead to the socket on the rear of the lamp. Plug USB lead into a power supply and turn on. 4.2. When the battery has fully charged the LEDs will turn GREEN. 4.3. Direct the lens away from your eyes before switching on. 4.4. Toggle the lamp between the end light and side light using the mode selector switch (fig.1). 4.5. The lamp may be suspended by the hook or attached to any ferrous surface by using the magnet.

5. MAINTENANCE 5.1. Keep the torch clean by wiping with a damp cloth. 5.2. Store torch in a dry childproof area.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Original Language Version Jack Sealey Limited LED317 Issue 1 30/05/18

WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potentia

Manualsnet FAQs

If you want to find out how the LED317 Sealey works, you can view and download the Sealey LED317 Inspection Lamp Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey LED317 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey LED317. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey LED317 Inspection Lamp Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey LED317 Inspection Lamp Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey LED317 Inspection Lamp Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey LED317 Inspection Lamp Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey LED317 Inspection Lamp Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.