Sealey HT300R Head Light Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey HT300R Head Light Instruction Manual PDF

3W COB & 1W SMD LED RECHARGEABLE HEADLIGHT WITH SENSOR MODEL NO: HT300R

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY 1.1. GENERAL SAFETY

8 DO NOT shine directly into your, another persons or an animals eyes. 8 DO NOT allow children to use the torch. 8 DO NOT use the torch if you suspect that the battery or the torch casing is damaged. 8 DO NOT leave batteries in a discharged state. Before storage remove batteries and dispose of in the correct manner.

1.2. BATTERY SAFETY WARNING! To reduce the risk of burns or fire: 8 DO NOT attempt to open the battery. 8 DO NOT crush, puncture, short contacts or dispose of in fire or water. 8 DO NOT expose to temperatures above 60C (140F). 9 If the electrolyte in the batteries gets on your skin, thoroughly rinse with water. If it gets in your eyes, rinse thoroughly with cool

water and seek immediate medical attention.

2. INTRODUCTION 3W COB + 1W SMD Rechargeable headlight with sensor function. Also including 3 SMD LEDs producing 300 Lumens. Can also act as a separate mini worklight with magnet. 3.7V 1000mAh Li-Poly battery with 0.5m USB cable included. Charging and battery indicator capabilities. 4hr maximum runtime using COB.

3. SPECIFICATION MODEL NO: ............................................................ HT300R Battery: .................................. 3.7V 1000mAh Li-Poly Battery Charging Time: ...............................................................3-4hr LED Qty: ..........................................................1 COB 3 SMD LED Type: .......................................................... COB + SMD Lumen Output: .................................COB-150lm SMD-300lm Operating Time: ........................................ COB/SMD 4hr/2hr

4. OPERATION 4.1. TORCH OPERATION 4.1.1. Press power button (fig.1) once to turn unit on. 4.1.2. The battery charge state is indicated by the 4 blue LEDs (fig.1). 4.1.3. Press power button again to light the primary light (fig.1). 4.1.4. Press power button again to also light the secondary

light (fig.1). 4.1.5. Press the power button again to turn the unit off. 4.2. LIGHT SENSOR 4.2.1. Press the sensor button (fig.1) to enable sensing. 4.2.2. Pass hand in-front of light until light comes on. 4.2.3. Pass hand in-front of light again and light goes off. 4.2.4. Press the sensor button (fig.1) to disable sensing. 4.3. TILTING HEAD 4.3.1. The headtorch has 4 possible lockable positions, 00,

200, 400, and 600. 4.4. DISMOUNT TORCH 4.4.1. Twist the light unit through 450 to remove it from headband mounting.

4.4.2.

fig.1

HT300R Issue 2 (2) 04/07/22Original Language Version Jack Sealey Limited

Refer to instructions

SMD

Power Button

Secondary Light

Sensor Button

Light Sensor

Battery State Indicators

5. MAINTENANCE 5.1. CHARGING: Connect the USB lead to the port on the side of the unit and to a USB power supply socket at the other. 5.2. Keep the torch clean by wiping with a damp cloth.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

WEEE REGULATIONS Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Original Language Version Jack Sealey Limited

BATTERY REMOVAL Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within th

Manualsnet FAQs

If you want to find out how the HT300R Sealey works, you can view and download the Sealey HT300R Head Light Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey HT300R as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey HT300R. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey HT300R Head Light Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey HT300R Head Light Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey HT300R Head Light Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey HT300R Head Light Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey HT300R Head Light Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.