Sealey API15 Drawer Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey API15 Drawer Instruction Manual PDF

1.1 GENERAL SAFETY WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using workbenches and associated workbench drawers. WARNING! Use the workbench on level and solid ground, preferably concrete. Avoid tarmacadam since the workbench may sink into the surface. Locate the workbench in a suitable working area. Keep the work area clean, uncluttered and ensure there is adequate lighting. Keep the workbench clean and tidy in accordance with good workshop practice. Keep children and unauthorised persons away from the working area. Use the supplied rubber caps on all exposed self tapping screw projections. DO NOT remove a fully loaded drawer. DO NOT use the workbench drawers for any purpose other than that for which they are designed. DO NOT use the workbench drawers out of doors. DO NOT get the workbench drawers wet or use in damp or wet locations or areas where there is condensation. DO NOT clean the workbench drawers with any solvents which may damage the painted surfaces. Note! The assembly of this product to the workbench will require assistance.

InstrUctIons For:

SINGLE/DOUBLE DRAWER UNIT FOR API SERIES WORKBENCHES modeL no's: API14, API15

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

1. SAFETY

2. INTRODUCTION Optional single, double or triple drawer units for our API series of Industrial Workbenches. Supplied with fixing kit allowing unit to be securely mounted. Drawers run on heavy-duty ball bearing drawer slides with a load bearing of up to 40kg. Fitted with fixed dividers running front to back and then supplied with cross dividers for personal storage layout. supplied with high quality lock and two coded keys.

3. SPECIFICATION Model No:............................................. API14........................................................ API15 compatibility:........................................ API1500, API1800, API2100 ..................... API1500, API1800, API2100 overall size:..........................................405 x 580 x 180mm.................................. 407 x 580 x 280mm Internal drawer size (WxdxH):.............300 x 450 x 70mm.................................... 300 x 450 x 70mm maximum drawer capacty:...................40kg (evenly spread)................................ 40kg (evenly spread)

4. CONTENTS Item description QtY 1 enclosure c/w Ball Bearing tracks 1 2 drawer c/w runner tracks 1 set per drawer (2 drawers model no API15) 3 central mullion Partition 1 per drawer 4 transom Partition Plate 4 per drawer 5 self tapping screw 8 per drawer 6 safety cap 8 per drawer 7 Bridge channel (c/w captive nuts) 2 8 Hex Head screw m8 x 20 c/w spring & plain washers 4 sets 9 drawer Key (record the key code) 2

287mm centres

(1)

(1)

(2)

(2)

(2)

(9)

fig.1

Model No API14

Model No API15

(8)

(8) (8)

(8)

API14, API15 Issue no.3(sP) 07/12/16Original Language Version Jack sealey Limited

API14, API15 Issue no.3(sP) 17/12/16

fig.5

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. IMPORTANT: no liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

01284 757500

01284 703534 sales@sealey.co.uk

Sole UK Distributor, Sealey Group, Kempson Way, suffolk Business Park, Bury st. edmunds, suffolk, IP32 7Ar

www.sealey.co.uk

Original Language Version Jack sealey Limited

Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500.

287mm centres setting (for enclosure fitting)

5. ASSEMBLY 5.1. Drawer removal from enclosure 5.1.1. Unlock the drawer if required; open the drawer fully and squarely until it stops (fig.2). Remove the loose components, items 3,4,5 and 6. 5.1.2. With your thumb, push the plastic catch down one side (fig.3) and with your forefinger up the opposite side. Continue to hold the catches until fully exposed (fig.4), then release. The drawer can now be fully removed. 5.1.3. It will be necessary to hold the enclosure steady; unless fitted to the bench; to remove the drawer completely. 5.1.4. slide the drawer runners back inside the enclosure after drawer removal. 5.2. Fitting the enclosure to the bench 5.2.1. Locate the two bridge channels from beneath the bench at the required centres (fig.1) and (fig.5). As a suggestion only; position the bridge channels centrally about the bench width for best access. 5.2.2. offer the empty drawer enclosure up to the bridge channels aligning slots to the captive nut holes in the bridge channels. 5.2.3. A second person is required to screw the enclosure to the bridge channels. DO NOT tighten at this stage. 5.2.4 With all four screws fitted (item 8), with at least three threads engaged on each nut; slide the enclosure to the required position (fig.6) and tighten all four screws. 5.3. Drawer Mullion Partition 5.3.1. Fit (item 3) centrally with self tapping screws (item 5) through the pre-punched holes. transom plates (item 4) partitioning as required. 5.3.2. Fit the rubber safety caps (item 6) to all self tapping screw projections, from the underside of the drawer. 5.3.3. Locate the drawer guides with the enclosure runners and slide the drawer/drawers fully back into the enclosure. Generally the reverse of removal, without the need to touch the plastic catches. DO NOT force at any stage.

fig.2

fig.3

fig.4

fig.6

example position only

(3)

(4)

(5) (6)

6. MAINTENANCE

Underside

6.1. Lubricate the drawer runner bearings with a general purpose grease every 6 months. Wipe off excess with a dry cloth.

Manualsnet FAQs

If you want to find out how the API15 Sealey works, you can view and download the Sealey API15 Drawer Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey API15 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey API15. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey API15 Drawer Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey API15 Drawer Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey API15 Drawer Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey API15 Drawer Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey API15 Drawer Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.