INSTRUCTIONS FOR:
8 DRAWER ROLLCAB, 3 DRAWER MID-BOX, 5 DRAWER TOPCHEST: ALL WITH BALL BEARING RUNNERS. BLACK/GREY MODEL NOs: AP3508TB, AP3503TB, AP3505TB
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions and maintained properly, give you years of trouble free performance.
Refer to instruction
manual
1. SAFETY 1.1. GENERAL SAFETY WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this Topchest, Add- on chest & Rollcab combination. Locate the toolbox combination in a suitable working area. Use the Rollcab on level and solid ground, preferably concrete. Keep the work area clean, uncluttered and ensure that there is adequate lighting. Keep the toolbox combination clean and tidy in accordance with good workshop practice. Keep children and unauthorised persons away from the working area. DO NOT use the toolbox combination for any purpose other than that for which it is designed. DO NOT move the toolbox combination with drawers open. To avoid tipping, open one drawer at a time and close and secure all drawers whilst moving. DO NOT overload or step on the drawers. DO NOT place the toolbox combination in a damp or wet location or an area where there is condensation. DO NOT clean the toolbox combination with any solvents which may damage the surfaces or the protective coating. WARNING! The warnings, cautions and instructions referred to in these instructions cannot cover all possible conditions and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.
2. INTRODUCTION Manufactured with double skin side walls for extra strength and finished in smooth, hi-gloss, triple baked enamel. Resists scratches, oil, dirt and most solvents. Drawers run on 35mm ball bearing runners for strength and drawer faces have full length pulls with chrome style trim. All chests are supplied with tumbler type security locks and two numbered keys and have drop down carry handles. For mobility around the workshop, even when fully laden, the rollcab features hard compound rubber wheels, two fixed and two locking castors. All drawers have been specifically sized to accommodate our range of Siegen tool trays.
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . AP3503TB . . . . . . . . . . . . . . . . . . . . .AP3505TB . . . . . . . . . . . . . . . . . . . . . AP3508TB Description: . . . . . . . . . . . . . . . . . . . . . . . . . . Mid-Box . . . . . . . . . . . . . . . . . . . . . . . Topchest. . . . . . . . . . . . . . . . . . . . . . . Rollcab Specification: W x D x H Overall Size: . . . . . . . . . . . . . . . . . . . . . . . . . 605 x 310 x 275mm. . . . . . . . . . . . . . 600 x 305 x 470mm. . . . . . . . . . . . . . 615 x 330 x 885mm Overall Size Inc Handle(s):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 625 x 305 x 470mm. . . . . . . . . . . . . . 680 x 330 x 885mm Medium Drawer: . . . . . . . . . . . . . . . . . . . . . . 510 x 270 x 65mm (x3) . . . . . . . . . . . 510 x 270 x 65mm (x5) . . . . . . . . . . . 510 x 270 x 65mm (x5) Large Drawer: . . . . . . . . . . . . . . . . . . . . . . . . N/A. . . . . . . . . . . . . . . . . . . . . . . . . . .N/A . . . . . . . . . . . . . . . . . . . . . . . . . . . 510 x 270 x 100mm (x3)
3. SPECIFICATIONS
AP3503TB, AP3505TB, AP3508TB Issue: 1 - 09/06/16 Jack Sealey Limited Original Language Version