Sealey WS454.V3 Dolly Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey WS454.V3 Dolly Instruction Manual PDF

WHEEL DOLLY SET 454KG CAPACITY MODEL NO: WS454.V3

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment. 9 Familiarise yourself with this products application and limitations, as well as the specific warnings below relating to their use. 9 Ensure the Wheel Dollies are in sound condition and good working order. Take action for immediate repair or replacement of damaged parts. 9 Use genuine parts only. The use of improper parts may be dangerous and will invalidate the warranty. 9 Wheel Dollies should only be used in suitable, well lit areas. 9 Wheel Dollies must be used in pairs at either the front or rear of the vehicle. They must never be used diagonally. 9 Keep general area clean and tidy and free from obstructions. 9 Use Wheel Dollies on level and solid ground, preferably concrete. 9 Maintain the Wheel Dollies in good condition. 9 Ensure there are no passengers in the vehicle. 9 Ensure the Wheel Dollies are free to move and that there are no obstructions in the area of use. 9 When not in use store Wheel Dollies in a safe, dry, childproof area. 8 DO NOT start or drive the vehicle whilst it is raised on wheel dollies. 8 DO NOT use the Wheel Dollies for purposes other than that for which they are intended. 8 DO NOT allow untrained persons to use the Wheel Dollies. 8 DO NOT leave the vehicle unattended whilst it is raised on the Wheel Dollies. 8 DO NOT operate the Wheel Dollies when you are tired or under the influence of alcohol, drugs or intoxicating medication. 8 DO NOT get the Wheel Dollies wet or use in damp or wet locations or areas where there is condensation. 8 DO NOT exceed the rated capacity of the Wheel Dollies. Remember that the front of a vehicle is usually heavier than the rear. 8 DO NOT use the Wheel Dollies to support a vehicle in order to do work underneath it. 9 Maintain correct balance and footing when moving vehicle. Ensure the floor is not slippery and wear non-slip shoes. 9 Ensure all non-essential persons keep a safe distance whilst the Wheel Dollies are in use. 9 We recommend that at least 2 persons are involved in manoeuvring the vehicle when supported on wheel dollies. The vehicles weight

provides a large amount of inertia which has to be overcome to get the vehicle moving and more importantly, stopped. WARNING! The warnings, cautions and instructions covered in this manual cannot cover all possible conditions and situations

that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.

2. INTRODUCTION Pressed steel wheel dolly with four 90mm metal castors. Can handle up to 355mm profiles. Suitable for use in bodyshops and workshops.

3. SPECIFICATION Model No: ................................................... WS454.V3 Capacity Each: ................................................... 454kg Maximum Tyre Profile: ..................................... 355mm Castor Diameter: ..............................................90mm

4. ASSEMBLY 4.1. Attach castors to the corners of each dolly with

the nuts/bolts provided, ensuring bolts are secure. 4.2. Always lower load centrally on to the dolly.

5. MAINTENANCE 5.1. Before each use check for any visible damage.

If any suspect item is found remove dolly from service and take necessary action to remedy the problem.

8 DO NOT use the dolly if believed to have been subjected to abnormal load or shock load. 5.2. Keep the dolly clean and periodically lubricate the wheels and castor bearings.

WS454.V3 Issue:2 (3) 02/08/21Original Language Version Jack Sealey Limited

Refer to instructions

Wear safety footwear

fig.1

Original Language Version Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: No Liability is accepted for incorrect use of this product. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our technical team on technical@sealey.co.uk or 01284 757505. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Parts support is avail

Manualsnet FAQs

If you want to find out how the WS454.V3 Sealey works, you can view and download the Sealey WS454.V3 Dolly Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey WS454.V3 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey WS454.V3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey WS454.V3 Dolly Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey WS454.V3 Dolly Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey WS454.V3 Dolly Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey WS454.V3 Dolly Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey WS454.V3 Dolly Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.