Sealey MS0651 Dolly Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey MS0651 Dolly Instruction Manual PDF

Motorcycle centre Stand Moving dolly model no: MS0651

thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. Safety 9 maintain thedolly in good condition (use an authorised service agent). 9 Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty. 9 locate the dolly in a suitable work area. Keep area clean and tidy and free from unrelated materials, and ensure that there is adequate

lighting. 9 ensure that the floor is level and strong enough (preferably concrete) to take the weight of the dolly and the motorcycle. 8 do not use the dolly on tarmacadam, as the surface may be unstable. 9 Keep the dolly clean for best and safest performance. 8 do not exceed the rated capacity, the maximum motorcycle weight is 220kg. 9 maintain correct balance and footing, do not over reach. ensure the floor is not slippery and wear non-slip shoes. 9 Keep children and unauthorised persons away from the work area. 8 do not use the dolly for a task it is not designed to perform. 8 do not use the dolly if it is damaged. 8 do not use the dolly when you are tired or under the influence of alcohol, drugs or intoxicating medication. 8 do not allow untrained persons to use the dolly. 8 do not make any modifications to the dolly. 9 Before storing in safe area, ensure that all parts are clean and free of grease and oil. Warning! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations that may occur.

It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.

2. introduction This motorcycle moving dolly can be used to manoeuvre motorcycles (up to 220kg vehicle weight) with centre-stands and is perfect for places where space is restrictive. The centre stand locates on the 4mm thick hardened steel plate and the 360 degree castors allow the bike to be moved in any direction. Complete with a hand operated built-in-brake mechanism which is ideal for workshop, showroom and home garage use.

3. Specification Model no: . . . . . . . . . . . . . . . . . . . . . . . . . . . MS0651 Capacity:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220kg

4. aSSeMbly 5.1. Attach the castors securely using nylock nuts. note: The castors do not have brakes attached.

5. operation 5.1. Apply the brake on the dolly by rotating the handle as shown in (fig.1)

to position shown in (fig.2). 5.2. Position the dolly under the motorcycle. 5.3. line up the motorcycle centre stand with the dolly. 5.4. Kick the stand down so it is positioned in the centre of the dolly

and raise the bike onto the centre stand. 5.5. Release the brake by moving the brake handle as shown in (fig.2). 5.6. Holding the handle bars, move the bike in any direction. 5.7. Apply the brake to prevent dolly moving.

6. Maintenance 6.1. Wipe with a damp cloth to remove dirt. 6.2. Blow with compressed air to remove dust and keep the castors clean.

mS0651 | Issue 2 06/09/2019Original Language Version Jack Sealey limited

Refer to instructions

fig.1

fig.2

Original Language Version Jack Sealey limited

Sealey group, Kempson Way, Suffolk business park, bury St edmunds, Suffolk. ip32 7ar 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

environMent protection Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. important: no liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Parts support is available for this product. Please log on to www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 75

Manualsnet FAQs

If you want to find out how the MS0651 Sealey works, you can view and download the Sealey MS0651 Dolly Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey MS0651 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey MS0651. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey MS0651 Dolly Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey MS0651 Dolly Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey MS0651 Dolly Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey MS0651 Dolly Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey MS0651 Dolly Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.