Sealey SM3002DFD.V2 Display Instruction Manual PDF

1 of 3
1 of 3

Summary of Content for Sealey SM3002DFD.V2 Display Instruction Manual PDF

instructions for

digital feed display for sm3002 model no: sm3002dfd.V2

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. introduction digital display for the cross slide and the compound tool rest to replace the standard graduated scales. these lcd units improve accuracy, save reading time and minimise errors. imperial or metric readings may be selected and the reading can be zeroed at any point. three decimal place (metric) and four decimal place (imperial) displays with an accuracy of 0.025mm/0.001. Batteries not supplied.

2. contents 1. digital readout box 2. compound slide bracket 3. cross slide bracket 4. cross slide transition shaft 5. compound slide transition shaft 6. compound feed screw 7. cross slide feed screw 8. screws (not shown)

3. assembly 3.1. assembly on tHe cross slide

sm3002dfd.V2 | issue:1 15/01/18Original Language Version Jack sealey limited

refer to instruction

manual

1. remove the screw securing the cross slide handle. remove the ball handle, spacer and dial.

2. remove the dial bracket and take out the cross slide feed screw.

3. Assemble the new cross slide feed screw (part no.7) and bracket (part no.3). tighten the two m4 x 16 screws (part no.8)

4. Assemble the transmission shaft (part no.4) onto the dismantled ball handle.

5. Assemble the digital readout box (part no.1) onto the bracket, then fit the assembled transition shaft and ball handle into the leadscrew. slightly adjust the transition shaft to make it work properly with the leadscrew. finally, tighten with two m3 x 25mm screws (part no.8).

6. Make the final adjustment for free movement of the handle with little drag. lock the small screws.

1. remove the screw securing the compound handle. remove the ball handle, spacer and dial.

2. loosen the screws. remove the dial bracket and take out the compound feed screw.

3. Assemble the block (part no.8) and compound feed screw (part no.6) on the bracket (part no.2).

4. use the transition shaft to push the assembled compound feedscrew and bracket into the compound slide.

3.2. assembly on tHe compound slide

sm3002dfd.V2 | issue:1 15/01/18Original Language Version Jack sealey limited

5. Assemble the transition shaft (part no.5) onto the dismantled ball handle.

7. Assemble the digital readout box (part no.1) onto the bracket, then fit the assembled transition shaft and ball handle into the lead screw. slightly adjust the transition shaft to make it work well with the leadscrew. finally tighten with two m3 x 25 screws (part no.8).

8. Make the final adjustment for free movement of the handle with little drag. lock the small screws.

6. Refit the dismantled, original M4 x 12 screws. take out the transition shaft again.

sealey group, Kempson Way, suffolk business park, bury st edmunds, suffolk. ip32 7ar 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. important: no liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

enVironment protection recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, dra

Manualsnet FAQs

If you want to find out how the SM3002DFD.V2 Sealey works, you can view and download the Sealey SM3002DFD.V2 Display Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey SM3002DFD.V2 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey SM3002DFD.V2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey SM3002DFD.V2 Display Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey SM3002DFD.V2 Display Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey SM3002DFD.V2 Display Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey SM3002DFD.V2 Display Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey SM3002DFD.V2 Display Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.