Contents

Sealey VSCANP Diagnostic Tool Instruction Manual PDF

1 of 35
1 of 35

Summary of Content for Sealey VSCANP Diagnostic Tool Instruction Manual PDF

1

Refer to instructions

To prevent personal injury or damage to vehicles and/or the diagnostic tool, read this instruction manual first and observe the following safety precautions at a minimum whenever working on a vehicle:

Always perform automotive testing in a safe environment. Wear safety eye protection that meets ANSI standards. Keep clothing, hair, hands, tools, test equipment, etc. away from all

moving or hot engine parts. Operate the vehicle in a well-ventilated work area: Exhaust gases

are poisonous. Put blocks in front of the drive wheels and never leave the vehicle

unattended while running tests. Use extreme caution when working around the ignition coils,

ignition wires and spark plugs. These components create hazardous voltages when the engine is running.

Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and ensure that the handbrake is applied.

2

Keep a fire extinguisher suitable for petrol/chemical/electrical fires nearby.

DO NOT connect or disconnect any test equipment while the ignition is on or the engine is running.

Keep the scan tool dry, clean and free from oil/water or grease. Use a mild detergent, DO NOT use solvent or abrasive cleaners.

Jack Sealey Limited Original Language Version VSCANP Issue:1 03/01/18

3

Chapter I Product Introduction........................................................................ 5

1.2 Care and Maintenance.................................................................................... 5

1.2.1 Storage................................................................................................... 5

1.2.2 Tablet and VCI protection....................................................................6

Chapter II V-Scan Pro Tablet.............................................................................7

2.1 V-Scan Pro Tablet Overview.......................................................................9

2.2 V-Scan Pro Tablet Specifications............................................................. 9

Chapter III V-Scan Pro VCI.............................................................................. 10

3.1 V-Scan Pro VCI Overview..........................................................................10

3.2 V-Scan Pro VCI Specifications................................................................ 11

Chapter IV V-Scan Pro Tablet Display Screens.......................................11

4.1 Vehicle Diagnosis Screen.........................................................................12

4.2 VCI Connection Screen............................................................................. 13

4.3 Data Management Screen.........................................................................14

4.4 Reference Guide Screen........................................................................... 14

4.5 Update Screen..............................................................................................15

4.6 Settings Screens.........................................................................................16

4.6.1. Language Settings.............................................................................16

4.6.2. Unit.......................................................................................................16

4.6.3. User Info..............................................................................................17

4

4.6.4. Self Test..............................................................................................17

4.6.5. Activation.............................................................................................18

4.6.6. About Us............................................................................................. 19

4.6.7. System Settings.................................................................................19

Chapter V Vehicle Diagnosis..........................................................................20

5.1 Connection method of tablet and VCI................................................... 20

5.2 Vehicle Diagnosis....................................................................................... 23

Chapter VI Update & Activation.....................................................................27

6.1 Update............................................................................................................27

6.2 How to Renew Update Subscription......................................................29

6.3 Activation...................................................................................................... 29

Chapter VII Compliance Information............................................................ 33

Chapter VIII Parts Information........................................................................34

5

Chapter I Product Introduction

The V-Scan Pro diagnostic tool is a fast wireless multitasking operating system. Includes the most extensive coverage of OE-level diagnostics, allowing independent garages to provide a complete diagnostic service for cars, SUVs and vans.

Software features:

Read/clear codes

Live data

Actuation tests

ECU and key coding (some vehicles)

Special functions; Battery Configuration, DPF, Electronic Parking Brake , Oil Service Reset, Throttle Reset, TPMS and more

Maintenance functions; Technical information and data management

1.2 Care and Maintenance

1.2.1 Storage

1) Store the product on a flat and dry place. 2) Never put the product in direct sunlight or near to a source of heat. 3) Never put the product in a magnetic field. 4) Avoid shock, dust, moisture and extremely high temperature. 5) If main unit is dirty, power off the machine, then clean the housing case

6

with soft cloth.

1.2.2 Tablet and VCI protection

1) Be careful to plug and unplug the main cable and diagnostic connector. Tighten the screws before operation to avoid unexpected disconnecting and/or damage to the diagnostic port.

7

Chapter II V-Scan Pro Tablet

2.1 V-Scan Pro Tablet Overview

Front View

Top & Bottom

8

Side View

Back View

9

2.1 V-Scan Pro Tablet Overview

1 Front camera 11 HDMI interface

2 Charging indicator 12 USB Micro-B port

3 Light-sensitive sensor 13 USB A port

4 (Not in use) 14 Charging socket

5 Power switch 15 SIM card slot (Not In Use)

6 Volume + 16 TF card slot (Not In Use)

7 Volume - 17 Speaker

8 (Not in use) 18 Rear camera

9 Docking port (Dock not available) 19 (Not in use)

10 Headphone jack

2.2 V-Scan Pro Tablet Specifications Ingress

Protection IP67

Dimension 228 x 147 x 16.5mm Display Screen

8-inch, 16:10, 800 x 1280 IPS screen

Touch Screen

5-dot capacitive screen, G+G, hardness 7H+, scratch-resistant, TP thickness: 1.1mm, COF, support handwriting

Camera Front 2.0MP with work indicator, rear 5.0MP CPU Intel Bay trail-T (Quad-core), Z3735F, 1.86GHz GPU Intel HD Graphic (Gen7) RAM RAM 2GB, ROM 32GB

10

Chapter III V-Scan Pro VCI

3.1 V-Scan Pro VCI Overview

Power indicator On when powered on (connected to vehicle)

Diagnostic indicator Flashes when communicating with vehicle

Wireless indicator On when connected to a tablet USB indicator On when connected to a tablet

11

DB15 interface Connect to main test cable; Connect the other end of cable to vehicle

USB interface (B shape)

Connect with tablet or upgrade VCI box

3.2 V-Scan Pro VCI Specifications Processor Cortex-M3 Micro-controller Frequency 100MHz

Processor model LPC1768 Flash memory 512KB

RAM 64KB Wireless Support for Bluetooth 2.0, Bluetooth 4.0

12

Chapter IV V-Scan Pro Tablet Display Screens

Start up the tablet (press and hold power switch for 5 seconds). Open the V-Scan Pro app:

4.1 Vehicle Diagnosis Screen

Open the diagnosis menu to begin vehicle diagnostics. Here, you can select from a wide range of different manufacturers from different continents.

13

4.2 VCI Connection Screen 1. Wireless.

2. USB. (USB connection lead is not supplied. Will require a USB-A male to USB-B male lead). This is an alternative method of connecting the VCI to tablet. Would only be used if the Bluetooth function isnt working or operator would rather not use.

14

4.3 Data Management Screen

Storage location for screen shots, test logs, vehicle software version, etc.; for users reference.

4.4 Reference Guide Screen

Maintenance Help: Includes diagnostic/repair information for some vehicles as a reference guide.

Fault Code: Built-in fault code library, allowing the user to search a code, giving useful information.

Dictionary: Allows user to search abbreviations used in vehicle diagnostics.

15

4.5 Update Screen

When connected to the internet via Wi-Fi or cable interface, update to the latest diagnostic software.

16

4.6 Settings Screens

Set Language, Units, User Info, Self-Test, Activation, Push Notifications, About Us and other functions.

4.6.1. Language Settings

The V-Scan Pro supports multiple languages.

4.6.2. Unit

Set the live data units in the diagnostic software. You can select Metric or English as needed. (For example Metric would be km and English would be miles.)

17

4.6.3. User Info

Set your personal information: name, phone, email, address, company name.

18

4.6.4. Self Test

You can check the V-Scan Pro for open or short circuits.

4.6.5. Activation The V-Scan Pro will need to be activated when received. This will start your 2 year standard subscription for updates to the software.

19

4.6.6. About Us

Provides information on the operating system and software versions. Also provides activation state and product S/N. (Serial Number)

4.6.7. System Settings

Opens up the tablets settings menu.

20

Chapter V Vehicle Diagnosis

5.1 Connection method of tablet and VCI

Connect the VCI box to the vehicle to be diagnosed via the main test cable and diagnostic connector.

Turn on the tablet, enter VCI connection. It can be connected via Bluetooth and USB cable.

First: Connect the tablet with VCI box via Wireless.

1. It is default paired and will automatically connect when used. If the VCI is not paired, refresh the device list.

21

2. The ID for the VCI can then be found on the device list. Click to Connect.

22

3. Click Pair.

4. After the pairing is successful, the VCI wireless (Bluetooth) indicator on the tablet and on the VCI will illuminate. This indicates a successful connection.

When connected. The V-Scan Pro will display (please see image below). It will automatically pair next time you use it, and you do not need to set-up again.

23

5.2 Vehicle Diagnosis The following is an introduction to the V-Scan Pro Diagnosis.

1. Enter the Diagnosis menu.

2. Select continent and manufacturer.

24

2.1 You can also use the search function to find the manufacturer.

3. You can select automatic scanning or Manual selection. Automatic Scanning: This will load the ECUs the diagnostic tool has identified and can communicate with. Manual Selection System: This will show a list of ECUs for you to choose from.

25

4. Choose ECU for testing.

5. When you enter into the ECU that you want to test you will have a number of options. These include fault code reading, clearing, live data, actuation tests and special functions.

26

6. Fault code

7. Live Data

27

Chapter VI Update & Activation

After purchasing the Sealey V-Scan Pro you are advised to activate the machine immediately, regularly update it and complete the personal information. 6.1 Update

1. Click Update.

2. Click the refresh icon on the top right to check for latest updates.

28

3. Make sure software is on the latest version. The vehicle database will keep the tool up to date with the latest vehicles.

29

6.2 How to Renew Update Subscription

After the initial subscription has expired, it can be renewed by purchasing directly from Sealey on 01284757500. Sealey will just need the serial number of the V-Scan Pro. Activation of the new subscription will take 24 hours.

6.3 Activation

Sealey V-Scan Pro is not permanently activated when leaving the factory. After you power on the machine and select models, you will be prompted: "You are using the trial version, ** times left ", Click Activate in the settings menu to enter the activation interface. The tablet will then display a QR code.

1. On a separate device. Open up a QR code scan app. 2. Scan the QR code on the tablet.

30

3. Once scanned, the activation code will be displayed.

4. Fill in the activation code to the tablet. Click Complete to back to the activation interface.

31

5. Click Activation.

6. Activation is successful. If you are prompted Activation Failed, start again.

32

7. After the activation is successful, you can see the status bar is displayed as Activated.

33

34

Chapter VIII Parts Information

35

1 VSCANP.01 Tablet

2 VSCANP.02 VCI (Black Box)

3 VSCANP.03 Self-Diagnosis Plug

4 VSCANP.04 OBD 16 Pin

5 VSCANP.05 Battery Clip

6 VSCANP.06 Aux Vehicle Socket

7 VSCANP.07 VCI Main

Manualsnet FAQs

If you want to find out how the VSCANP Sealey works, you can view and download the Sealey VSCANP Diagnostic Tool Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey VSCANP as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey VSCANP. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey VSCANP Diagnostic Tool Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey VSCANP Diagnostic Tool Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey VSCANP Diagnostic Tool Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey VSCANP Diagnostic Tool Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey VSCANP Diagnostic Tool Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.