Sealey VS715.V3 CVJ Tool Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey VS715.V3 CVJ Tool Instruction Manual PDF

instructions for

CVJ thread Chaser 8pC model no: Vs715.V3

thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. safety WarNING! Wear approved eye protection. Wear appropriate Personal Protective equipment. A full range of Personal Protective

equipment is available from your sealey dealer. WarNING! ensure that Health & safety, local Authority regulations and general workshop practice regulations are adhered to when

using tools. 8 dO NOt use tools if damaged. 9 maintain tools to ensure that they are in an adequate condition for safe use and optimum performance. 9 ensure that a vehicle that has been raised by a jack is adequately supported. use axle stands. 9 Wear suitable clothing to avoid snagging. dO NOt wear jewellery. tie back long hair. 9 Account for all tools, parts and components being used. dO NOt leave these in or near the engine. return tools to suitable storage

after use. 9 When not in use, store in a safe, dry childproof place. 9 Keep children and unauthorised persons away from the work area. 8 dO NOt use air tools. WarNING! The warnings, conditions and instructions in this manual cannot cover all possible conditions and situations. The Operator/

User must apply caution and common sense (good practical sense).

2. INtrOduCtION A must have tool for every workshop. Repairs light damage to CV joint threads. Set contains sizes to fit the most common types of vehicle. must be used with a light oil to lubricate thread. supplied in storage case.

3. speCIfICatION model no ..................................................................... Vs715 contents..................m20x1.25, m20x1.5, m22x1.0, m22x1.5, .............m24x1.5, m24x2mm, 3/4x20unef, 13/16x20unef

4. OperatION 4.1. Provide appropriate lubrication while cutting threads. 4.2. remove the wheel axle nut. 4.3. choose the correct diameter and pitch thread chaser from the set. 4.4. screw the thread chaser onto the axle spindle, ensure the thread chaser is the correct way around face towards the thread. note:

the face is the side without the embossed writing. 4.5. When chasing a thread, turn turn clockwise, then turn anti-clockwise and so on, this will allow the swarf to flow into the grooves of

the chaser. 4.6. chase the entire thread in this manner. 4.7. When complete, remove the thread chaser. 4.8. clean the axle thread and thread chaser to completely remove all traces of swarf. 4.9. return chaser to storage box.

Vs715.V3 issue 1 22/12/17Original Language Version Jack sealey limited

refer to instructions

Wear eye Protection

Wear Protective clothing

Wear protective gloves

Wear safety footwear

sealey Group, Kempson Way, suffolk Business park, Bury st edmunds, suffolk. Ip32 7ar 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

eNVIrONMeNt prOteCtION recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: no liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Parts support is availa

Manualsnet FAQs

If you want to find out how the VS715.V3 Sealey works, you can view and download the Sealey VS715.V3 CVJ Tool Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey VS715.V3 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey VS715.V3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey VS715.V3 CVJ Tool Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey VS715.V3 CVJ Tool Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey VS715.V3 CVJ Tool Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey VS715.V3 CVJ Tool Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey VS715.V3 CVJ Tool Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.