Sealey DC2412 Converter Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey DC2412 Converter Instruction Manual PDF

INSTRUCTIONS FOR:

CONVERTER 24V TO 12V DC 15A MODEL NO: DC2412

WARNING! DO NOT use on any vehicles other than those with 24V DC systems. DO NOT connect to any AC power source. DO NOT exceed the rated load of 15A. DO NOT dismantle. The converter must be checked by qualified service personnel only . DO NOT obstruct the vents in the casing; allow cooling air to flow through the unit. DO NOT get converter wet or use in damp or wet locations or areas where there is condensation. DO NOT use for any purpose other than for which it is designed. DO NOT operate the converter if damaged. When not in use store inverter in a safe, dry, childproof location.

1. SAFETY

2. INTRODUCTION

3. SPECIFICATION

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions and properly maintained, give you years of trouble free performance.

Refer to Instructions

Suitable for commercial vehicles with 24V DC battery supply. Converts down to 12V DC 15A vehicle accessory output. Features a low and high voltage alarm for added protection. Additionally includes a 5V USB outlet. Supplied with 550mm accessory connection lead.

Model No:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC2412 Input Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24V Output Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V Output Amperage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15A Dimensions (L x W x H): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 x 85 x 50m Supply Connection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessory Connector Plug

Jack Sealey Limited DC2412 Issue:1 - 07/11/14 Original Language Version

4. OPERATION

4.1. Insert the input plug into a 24V DC accessory socket. Ensure that the socket is live; it may be that the vehicle key needs to be turned to the accessory position to energize the socket. 4.2. Plug the appliance to be powered into either the 12V or 5V USB socket on the fascia of the converter. 4.3. An alarm will sound within the converter if: A)Theinputvoltagedropssignificantlyor B) The output load is too high. 4.4. In case of A): Disconnect the converter and only use again when the 24V battery has been recharged thoroughly. In case of B): Reduce the electrical load to 15A or below. 4.5. Allow the unit to cool down after use before returning it to storage.

Environmental Protection Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)

into approved containers and dispose of the product and the fluids according to local regulations.

WEEE Regulations Dispose of this product at the end of its working life in compliance with the EU Directive on

Waste Electrical and Electronic Equipment (WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid waste authority for recycling information.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

01284 757500

01284 703534 sales@sealey.co.uk

Sole UK Distributor, Sealey Group, Kempson Way, Suffolk Business Park<

Manualsnet FAQs

If you want to find out how the DC2412 Sealey works, you can view and download the Sealey DC2412 Converter Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey DC2412 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey DC2412. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey DC2412 Converter Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey DC2412 Converter Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey DC2412 Converter Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey DC2412 Converter Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey DC2412 Converter Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.