Sealey VS151 Compensator Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey VS151 Compensator Instruction Manual PDF

INSTRUCTIONS FOR

ROCKER ARM AND VALVE COMPENSATOR TOOL MODEL NO: VS151

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY R WARNING! Wear approved eye protection. Wear appropriate Personal Protective Equipment. A full range of Personal Protective

Equipment is available from your Sealey dealer. R WARNING! Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to

when using tools. DO NOT use tools if damaged. Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance. Ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands. Wear suitable clothing to avoid snagging. DO NOT wear jewellery. Tie back long hair. Account for all tools, parts and components being used. DO NOT leave these in or near the engine. Return tools to suitable storage

after use. These Instructions are provided as a guide only. Always refer to the vehicle manufactures service instructions or a proprietary manual to establish the correct procedure and data. R WARNING! The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations. The Operator/

user must apply caution and common sense (good practical sense). R WARNING! Incorrect or out of phase camshaft timing can result in contact between the valve head and the piston crown. This will

cause damage to the engine.

2. INTRODUCTION Suitable for use on Vauxhall/Opel OHC engines. Permits quick, on vehicle, removal of rocker arm and valve play compensator. Mounts on camshaft housing. Cast construction with knurled hex head fixing.

3. APPLICATIONS Make: Model: Vauxhall: Corsa 1.7D (93-96) Astra F (92-96) Vectra A (93-95) Cavalier (93-95)

4. OPERATION 4.1. Refer to figs.1and 2. 4.2. The VS151 compressor allows easy removal of the rocker arms and hydraulic valve lifters for inspection or to enable the camshaft

to be withdrawn from the engine without disturbing the camshaft housing. Without the use of this tool, the camshaft can only be withdrawn by removing the camshaft housing from the cylinder head. As this requires removal of the cylinder head bolts there is a risk of breaking the head gasket seal.

4.3. Remove the camshaft cover. 4.4. Rotate the engine to ensure that the piston of the valve to be worked upon is not at TDC, to prevent the valve being pushed onto the

top of the piston by the compressor. 4.5. The cam lobe should also be clear of the rocker arm to give maximum clearance for its removal. 4.6. Ensure that the compression nut is at the top of the compressor stud. 4.7. Position the compressor in the camshaft housing with the foot resting on the valve spring retaining washer. 4.8. Screw the compressor pin into the threaded hole in the camshaft housing. 4.9. Using a wrench slowly wind down the compressor nut, ensuring that the foot locates around the valve spring retainer. 4.10. Remove rocker arm and inspect wear surfaces. 4.11. At this stage the hydraulic valve lifter (valve play compensator) may also be removed. Note: If the camshaft is to be removed without removing the camshaft housing the above procedure must be carried out, to remove all rocker arms. 4.12. After work has been completed, replace the hydraulic valve and rocker arms. 4.13. Slowly remove the compression nut until the valve is returned to its normal closed position. 4.14. The tool may now be removed from the engine.

Refer to Instruction

Manual

Wear eye Protection

VS151 | Issue 2(I) 08/05/15Original Language Version Jack Sealey Limited

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. IMPORTANT: No liability is accepted for incorrect use of this product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

Sole UK Distributor, Sealey Group.

Kempson Way, Suffolk Business Park,

Bury St. Edmunds, Suffolk.

IP32 7AR

www.sealey.co.uk

sales@sealey.co.uk

01284 757500

01284 703534

Web

VS151 | Issue 2(I) 08/05/15Original Language Version Jack Sealey Limited

fig.1

fig.2

Environmental Protection Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be

sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product become

Manualsnet FAQs

If you want to find out how the VS151 Sealey works, you can view and download the Sealey VS151 Compensator Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey VS151 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey VS151. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey VS151 Compensator Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey VS151 Compensator Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey VS151 Compensator Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey VS151 Compensator Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey VS151 Compensator Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.