Sealey PROJ-12 Cable Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey PROJ-12 Cable Instruction Manual PDF

instructions for

projump model no: proj12 & proj12/24

Thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SafeTy dAnGer! - Be AWAre, leAd-Acid BAtteries GenerAte eXPlosiVe GAses durinG normAl BAtterY oPerAtion. for

tHis reAson, it is VerY imPortAnt to reAd And folloW tHese instructions cArefullY, eAcH time You use tHe ProJumP eQuiPment. follow these instructions and those published by the battery manufacturer, and the maker of any equipment you intend to use in the vicinity of the battery. remember to review warning marks on all products and on engines.

9 ensure that Health & safety, local authority, and general workshop practice regulations are adhered to when using this equipment. 9 ensure that there is another person with you especially within hearing range of your voice, or close enough to come to your aid should a

problem arise when working near a lead-acid battery. 9 remove personal metallic items such as rings, bracelets, necklaces and watches. A lead-acid battery can produce a short-circuit

current high enough to weld a ring or the like to metal, which may cause severe burns. 9 ensure that hands and clothing (especially belts) are clear of fan blades and other moving or hot parts of engine, remove ties and contain

long hair. 9 Wear safety eye protection and protective clothing. Avoid touching eyes while working near battery. 8 do not smoke or allow a spark or flame in the vicinity of battery or engine. 8 do not drop any metal tool onto the battery as it may spark or short circuit the battery which could cause an explosion. 8 do not use whilst under the influence of drugs, alcohol or intoxicating medication. 9 familiarise yourself with the application, limitations and potential hazards relating to this product. Also, refer to the vehicle

manufacturers handbook. if in AnY douBt consult An electriciAn. 9 ensure that the Projump is in good order and condition before use. if in any doubt do not use the unit and contact an electrician. 8 do not dis-assemble the Projump for any reason. the Projump must be checked only by qualified service personnel. 9 only use recommended attachments and parts. to use unapproved items may be dangerous and will invalidate your warranty. WArninG! check that both vehicle batteries are the same voltage. 9 ensure that vehicles are not touching before attempting to use these leads. 9 Keep tools and other items away from the engines, and ensure that you can see the battery and the working parts of the engine clearly. 9 Keep children and unauthorised persons away from the work area. 9 ensure that the jump leads are not tangled and are clear of moving or hot engine parts. 8 do not allow the clamps to touch each other or to make contact with the vehicle bodywork, as this may result in arcing. 8 do not cross connect the power leads to the battery. ensure positive is to positive and negative is to negative. 8 do not pull the cables or clamps from the battery terminals. 8 do not operate in the vicinity of flammable liquids or gases. 8 do not try to jump start a frozen battery. 8 do not use or store the Projump in damp or wet locations. 8 do not use this product to perform a task for which it is not designed. WarNING! Do NoT use the vehicle fuel system (i.e. fuel lines or carburettor/injection system) for earthing. 9 the cables may become hot with excessive use. if so, allow a few minutes for them to cool before attempting to re-use. 9 if the Projump receives a sharp knock or blow, the unit must be checked by a qualified service agent before next use. 9 When not in use, store the Projump carefully in the bag provided and store in a safe, dry, childproof location. WArninG modern vehicles contain extensive electronic systems.You are required to check with the vehicle manufacturer, for any

specificinstructionsregardingtheuseofthistypeofequipmentoneachvehicle. no liability will be accepted for damage / injury, where this product is not used in accordance with all instructions.

2. INTroDucTIoN many of todays vehicles are crammed with sensitive electronic equipment including ecus, Air Bag sensors, digital dashes, Alarms, car radios,telephones and in-car security systems. the potential for damage to these items from carrying out even basic work on the vehicle is huge. transient spikes and surges generated by making/breaking contacts can fry electronic cards or, at the very least, lead to premature failure. By using the ProJumP surge Protected Booster cables, you will protect not only your own vehicle from these dangers, but also the sick vehicle. the traffic light system clearly shows if it is safe to proceed with the jump-start before any serious damage can be done.

ProJ12, ProJ12/24 | issue 3 30/08/16Original Language Version Jack sealey limited

refer to instructions

Wear eye protection

Wear protective gloves

Warning corrosive substance

3. SpecIfIcaTIoN model no...................................ProJ12...............................ProJ12/24 Voltage.............................................12V..................................12 or 24V cable section..............................20mm2..................................................25mm2

length...............................................5m...........................................7m

4. operaTIoN 4.1. Go to donor car engine must be switch off. 4.2. connect red clamp to positive battery terminal. 4.3. connect black clamp to negative battery terminal. 4.4. Green led - functioning correctly go to 4.7 4.5. red led - Wrong connection - swap clamps over. 4.6. Amber led - low battery, either run engine until green led stays on or find another donor vehicle go back to 4.1 4.7. disconnect red positive clamp to switch off test circuit. 4.8. Go to flat battery vehicle and connect other red clamp to positive and other black clamp to negative. 4.9. Amber or no led - go to 4.12 4.10. red led - Wrong connection - swap clamps over. 4.11. Green led - Battery not at fault - fault with vehicle. 4.12. reconnect red positive clamp to donor vehicle. 4.13. correct and safe connection is complete. 4.14. startflatbatteryvehicle. 4.15. if the cables become excessively hot , allow a few minutes for them to cool before trying again.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. ImporTaNT: no liability is accepted for incorrect use of this product. WarraNTy: Guarantee is 12 months from purchase date, proof of which will be required for any claim.

sole uK distributor, sealey Group.

Kempson Way, suffolk Business Park,

Bury st. edmunds, suffolk.

iP32 7Ar

www.sealey.co.uk

sales@sealey.co.uk

01284 757500

01284 703534

Original Language Version Jack sealey limited ProJ12, ProJ12/24 | issue 3 30/08/16

environmental protection recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain off any fluids (i

Manualsnet FAQs

If you want to find out how the PROJ-12 Sealey works, you can view and download the Sealey PROJ-12 Cable Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey PROJ-12 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey PROJ-12. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey PROJ-12 Cable Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey PROJ-12 Cable Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey PROJ-12 Cable Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey PROJ-12 Cable Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey PROJ-12 Cable Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.