Sealey AP4206BE.V2 Cabinet Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey AP4206BE.V2 Cabinet Instruction Manual PDF

1120MM MOBILE TOOL CABINET WITH POWER TOOL CHARGING DRAWER MODEL NO: AP4206BE.V2

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETYi

WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using these units. WARNING! Use the rollcab on level and solid ground, preferably concrete. 9 Keep the work area clean, uncluttered and ensure there is adequate lighting. 9 Keep the units clean and tidy in accordance with good workshop practice. 9 Keep children and unauthorised persons away from the work area. 8 DO NOT use these units for any purpose other than that for which they are designed. 8 DO NOT use the units outdoors. 8 DO NOT place the units in a damp or wet location or an area where there is condensation. 8 DO NOT clean the units with any solvents which may damage the surfaces or the protective coating. 8 DO NOT move the units with the drawers out. To avoid tipping, open one drawer at a time and close and secure all drawers whilst

moving the rollcab. 8 DO NOT step on the drawers. 8 DO NOT overload the drawers, weight limit per drawer is 36kg.

2. INTRODUCTION All heavy-duty steel construction and manufactured with steel inner walls for extra strength and durability. Heavy-duty 45mm ball bearing drawer slides provide superior performance, suitable for heavier loads. Full height rear locking mechanism, locks smooth running soft close drawers in place. Rust and solvent resistant black crinkle effect finish. Fitted with four 125mm PP wheels with black chrome effect alloys, two fixed and two locking swivel castors. Each drawer features stylish black anodized heavy-duty drawer pulls plus pre-cut non-slip liners. Power tool charging drawer fitted with 230V sockets (x4) and 5V 2.4A USB sockets (x2). Mounting points to fit additional four socket power strip - Model No. EL34USBB (not included). Stainless steel flip-top providing a work surface and additional storage. Cylinder lock for security of valuable items locks the drawers and lid.

3. ASSEMBLY 3.1. These units are heavy, obtain the help of at least one other person before attempting to unpack them. 3.2. Mount the side mounted handle onto the left hand end of cabinet and attach with 4 bolts (fig.1). 3.3. To remove a drawer with roller sliders, pull the drawer completely out, press down the right tab and lift up the left tab, pull drawer off the slides To reinstall the drawer, realign with the internal drawer slide and push until it locks in place (fig.2). 3.4. Fit bottle opener to the left hand (handle) end of the cabinet using two M6 x 16 mm bolts (fig.3). 3.5. Mounting holes for an additional power rail (EL34USBB - not included) are provided at both ends of the cabinet and mounting bolts

are provided with the cabinet. IMPORTANT: To avoid tipping, open one drawer at a time and close and secure all drawers whilst moving the rollcab/units.

AP4206BE.V2 Issue 1 15/12/21Original Language Version Jack Sealey Limited

Refer to instruction

manual

fig.1

fig.2

4. MAINTENANCE 4.1. Periodically lubricate wheel axles and tighten all nuts and bolts. 4.2. Keep all surfaces clean. Brush off and wipe down with damp cloth and mild detergent to maintain finish. 4.3. Lubricate the drawer slides sparingly every six months. 4.4. Stubborn grease and oil marks can be removed by using a non-abrasive cleaner.

Original Language Version Jack Sealey Limited

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids

Manualsnet FAQs

If you want to find out how the AP4206BE.V2 Sealey works, you can view and download the Sealey AP4206BE.V2 Cabinet Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey AP4206BE.V2 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey AP4206BE.V2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey AP4206BE.V2 Cabinet Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey AP4206BE.V2 Cabinet Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey AP4206BE.V2 Cabinet Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey AP4206BE.V2 Cabinet Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey AP4206BE.V2 Cabinet Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.