Sealey CV040 Bush Tool Instruction Manual PDF

Download download
Sealey CV040 Bush Tool Instruction Manual PDF
Sealey Manual Sealey Bush Tool Manual Sealey CV040 Manual Sealey Bush Tool Instruction Manual
Pages 2
Year 0
Language(s)
English en
1 of 2
1 of 2

Summary of Content for Sealey CV040 Bush Tool Instruction Manual PDF

Page 1

hydraulic commercial vehicle bush tool mODEL NO: cv040

thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. saFety

WarNiNG! Ensure Health and Safety, local authority and general workshop practice regulations are adhered to when using tools. 9 maintain the tool components in good and clean condition for best and safest performance. 9 Ensure that a vehicle which has been jacked up is adequately supported with axle stands. 9 Wear approved eye protection. A full range of personal safety equipment is available from your Sealey stockist. 9 Wear suitable clothing to avoid snagging. do Not wear

jewellery and tie back long hair. 9 Keep children and other unauthorised persons away from the

working area. 9 Ensure there is adequate lighting prior to using the tool. 8 do Not use the kit if any parts are missing or damaged. 8 do Not use tool for any purpose other than that for which it is

designed. imPortaNt: These instructions are intended as a guide only. Always refer to the vehicle manufacturers service instructions or a proprietary manual to establish the current procedure.

2. iNtroductioN Designed for the installation and removal of slotted bushes on HGV spring suspension. Includes a 12tonne hydraulic cylinder (supplied without hydraulic pump). Use in conjunction with Hydraulic Pump model Nos; RE83/840/CWH (Air/Hydraulic) or RE97.10-01 (Hydraulic). Installation protects the bush using the parallel working tension elements. Suitable for use on the vehicle. Safe and easy to use.

3. coNteNts/aPPlicatioNs

Refer to instruction

manual

Wear eye protection

Original Language Version Jack Sealey Limited

Part Number description application

CV040.02 Bush dia. 105mm (marked No. 3) mAN (410/414/460) Renault (430/450/460)

CV040.03 Bush dia. 105mm (marked No. 4) Volvo Fm12

CV040.04 Bush dia. 66mm (marked No. 5) stored under 12 mAN (410/414/460)

CV040.05 Bush dia. 59mm (marked No. 6) Renault (430/450/460)

CV040.06 Bush dia. 49mm (marked No. 7) Volvo Fm12

CV040.07 Bush dia. 78mm (marked No. 12) Volvo Fm12

CV040.08 Bush dia. 78mm (marked No. 13) Renault (430/450/460)

CV040.09 Bush dia. 98mm (marked No. 14) mAN (410/414/460)

CV040.10 Clamping Ring dia. 68mm (marked No. 9) mAN (410/414/460)

CV040.11 Clamping Ring dia. 60mm (marked No. 10) Renault (430/450/460)

CV040.12 Clamping Ring dia. 51mm (marked No. 11) Volvo Fm12

CV040.13 Installation Pad dia. 108mm (marked No. 15) Volvo Fm12

CV040.14 Installation Pad dia. 103mm (marked No. 16) Renault (430/450/460)

CV040.15 Installation Pad dia. 108mm (marked No. 17) mAN (410/414/460)

CV040.16 Threaded Stud Short m16x2.0

CV040.17 Threaded Stud Long m16x2.0

CV040.18 Clamp Sleeve Set

CV040.19 Hydraulic Ram

CV040 | Issue:1 20/11/19

Page 2

Original Language Version Jack Sealey Limited

4. oPeratioN This comprehensive time saving tool is designed to remove and install the slotted bushes found in the suspension springs on a range of Renault, mAN and Volvo vehicles without the need to remove the suspension spring. (See application table) The slotted bush needs compressing during installation due to its working tension. The hydraulic ram supplied is to be used with a hydraulic pump (not supplied) such as the Sealey RE97-10-01. 4.1. removal 4.1.1. AssemblethecomponentsaspertheapplicationstableforthevehiclebeingrepairedandconnecttheramtotheRE97-10-01.(fig.1)

Operate the pump to extract the bush, progress can be viewed through the slot in the side of the tool.

4.2. iNstallatioN 4.2.1. Select the appropriate insertion block for the application and assemble around the new suspension bush, tighten the clamping bolts.

(fig.2). 4.2.2. Fit the bush clamp to the insertion tool and assemble the tool using the appropriate insertion block for the application. 4.2.3. Operatethepumptoinsertthebushintothesuspensionspringuntilthebushclampcomesintocontactwiththespring.(fig.3) 4.2.4. Removethebushclamp(fig.4)andcontinuetooperatethepumpuntilthebushiscompletelyinstalled.

CV040 | Issue:1 20/11/19

fig.1 fig.2

fig.3 fig.4

sealey Group, Kempson Way, suffolk business Park, bury st edmunds, suffolk. iP32 7ar 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

eNviroNmeNt ProtectioN Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of

Manualsnet FAQs

If you want to find out how the CV040 Sealey works, you can view and download the Sealey CV040 Bush Tool Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey CV040 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey CV040. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey CV040 Bush Tool Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey CV040 Bush Tool Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey CV040 Bush Tool Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey CV040 Bush Tool Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey CV040 Bush Tool Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.