Sealey VS7021.V4 Bearing Instruction Manual PDF

Download download
Sealey VS7021.V4 Bearing Instruction Manual PDF
Sealey Manual Sealey Bearing Manual Sealey VS7021.V4 Manual Sealey Bearing Instruction Manual
Pages 2
Year 0
Language(s)
English en
1 of 2
1 of 2

Summary of Content for Sealey VS7021.V4 Bearing Instruction Manual PDF

Page 1

instructions for

UNIVERSAL FRONT HUB & BEARING INSTALLER model no: VS7021.V4

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY WARNING! ensure all Health and safety, local authority, and general workshop practice regulations are strictly adhered to when using

tools. 8 DO NOT use tools if damaged or worn. 9 maintain the tools in good and clean condition for best and safest performance. 9 ensure all threads are clean and well lubricated. 9 ensure vehicle is adequately supported with axle stands, ramps, etc. as appropriate. 9 Wear suitable clothing to avoid snagging. do not wear jewellery. tie back long hair. 9 Wear approved eye protection. A full range of personal safety equipment is available from your sealey dealer. 9 Account for all tools and parts being used and do not leave them in or on the vehicle. 9 IMPORTANT: Always refer to the vehicle manufacturers service instructions, or proprietary manual, to establish the correct procedure

and data. these instructions for use are provided as a guide only. WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible conditions

and situations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied by the operator.

2. i INTRODUcTION suitable for the installation and removal of front hub bearings without the need to dismantle the steering knuckle and strut assembly. fast and simple to use. suitable for most front wheel drive cars. Heavy-duty steel drifts with black phosphate finish for corrosion resistance. may be used with impact wrench.

3. i SPEcIFIcATION model number ........................................................... Vs7021 drift dia. ......55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm external sleeve diameter ............................................. 76mm Hub screw size ....................................m12 x 1.5, m14 x 1.5

4. i OPERATION

Vs7021.V4 issue 1 15/12/17Original Language Version Jack sealey limited

refer to instruction

manual

Wear Protective Gloves

Wear eye Protection

1. ADJUSTING NUT 2. WASHER 3. DRIFT cAP 4. BEARING

5. HUB 6. SLEEVE 7. SLEEVE cAP 8. ScREW

fig.1

fig.2

fig.3

Page 2

BEARING REMOVAL: Fig2.B identify the correct sleeve (6) to sit on the outside of the bearing housing and the correct drift (3) to drive the bearing from the housing. Assemble as shown in fig.2B using the correct sleeve cap (7). Keep the hub screw and nut well lubricated whilst driving out the bearing.

BEARING INSTALLATION: Fig2.c identify the correct sleeve cap (7) to sit on the outside of the bearing housing and the correct diameter drift (3) to drive the new bearing into the housing. Assemble as shown in fig.2C. Keep the hub screw and nut well lubricated whilst driving the new bearing into the housing.

5. i MAINTENANcE 5.1. Keep screw (fig.2 - item 8) well lubricated. 5.2. clean component parts after use and replace in correct location within storage case. 5.3. store in a clean, dry environment.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTEcTION recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids according to local regulations.

Note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice. Important: no liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months

Manualsnet FAQs

If you want to find out how the VS7021.V4 Sealey works, you can view and download the Sealey VS7021.V4 Bearing Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey VS7021.V4 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey VS7021.V4. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey VS7021.V4 Bearing Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey VS7021.V4 Bearing Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey VS7021.V4 Bearing Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey VS7021.V4 Bearing Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey VS7021.V4 Bearing Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.