Sealey WB951LEDG Beacon Instruction Manual PDF

1 of 2
1 of 2

Summary of Content for Sealey WB951LEDG Beacon Instruction Manual PDF

12V/24V LED WARNING BEACON MODEL NO: WB951LEDG, WB951LEDR, WB952LEDR, WB954LEDR, WB955LEDG

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY 9 Familiariseyourselfwiththisproductsapplicationandlimitations,aswellasanyspecificpotentialhazardspeculiartothebeacon. 9 Replaceorrepairdamagedparts.Userecommendedpartsonly.Nonauthorisedpartsmaybedangerousandwillinvalidatethe

warranty. 8 DO NOTusethebeaconforanypurposeotherthanforwhichitisdesigned. 8 DO NOTallowchildrentooperatethebeacon. 8 DO NOToperatethebeaconifanypartsaremissingordamagedasthismaycausefailureorpossiblepersonalinjury. 9 Whennotinuseswitchthebeaconoffandwhereappropriateremoveplugfrompowersupply. 9 Thisbeaconisintendedtobeusedonlyin12Vor24VDCsystems. 9 Thebeaconsaremeanttobeusedasawarningsignal.Applicationse.g.Trucks,excavators,agriculturalmachinesandtractorsetc. 8 DO NOTlookstraightintothelight.Thebrightlightmaycauseaseriouseyedamage. 9 Makesurethatthebeaconisproperlyinstalledbeforedrivingthevehicle. 9 Followthecountry-specificregulationswheninstallingthewarninglightsontheroofofthevehicle.

2. INTRODUCTION WB951LEDG:Greencolourbeaconforuseonplantvehiclestoindicatethataseatbeltisbeingworn.Singlepoint-mountingbeaconsuitable fordirectmountingtovehicleroofusing12mmbolt.Fittedwith361WhighpowerLEDs.120Flashperminutepattern.FullymeetsECER10 regulations.IPRatingofIP66.

WB951LEDR:Redcolourbeacontobeusedinrecoveriesonnormalandsmartmotorways.Singlepoint-mountingbeaconsuitablefordirect mountingtovehicleroofusing12mmbolt.Fittedwith12highpowerLEDs.120Flashperminutepattern.FullymeetsECER65andECER10 regulations.IPRatingofIP66.

WB952LEDR:Redcolourbeacontobeusedinrecoveriesonnormalandsmartmotorways.Threepoint-mountingbeaconsuitablefordirect mountingtovehicleroofusing3x6.5mmbolts.Fittedwith12highpowerLEDs.120Flashperminutepattern.FullymeetsECER65andECE R10regulations.IPRatingofIP66.

WB954LEDR:Redcolourbeacontobeusedinrecoveriesonnormalandsmartmotorways.Fittedwithapowerfulmagnet,strongenoughto copewithnormalroadspeedsandholesforoptionalmountingviascrews.Suppliedwith3mcoiledflexanduniversalvehicleaccessorysocket plug.Fittedwith12highpowerLEDs.120Flashperminutepattern.FullymeetsECER65andECER10regulations.IPRatingofIP66.

WB955LEDG:Greencolourbeaconforuseonplantvehiclestoindicatethataseatbeltisbeingworn.Flexiblespigotbeaconsuitablefor mountingonspigotbrackets,SealeyModelNosRB95B1orRB95B2.Fittedwith36x1WhighpowerSMDLEDs.120Flashperminute pattern.FullymeetsECER10regulations.IPRatingofIP66.

3. SPECIFICATION Model No:..........................................WB951LEDG......... WB951LEDR...................WB952LEDR........WB954LEDR........WB955LEDG LED Type:......................................... 36x1WSMD......... 12x3WSMD...................12x3WSMD........12x3WSMD....... 36x1WSMD Wattage:...........................................................36W........................36W................................. 36W...................... 36W......................36W Voltage:........................................................12/24V....................12/24V............................. 12/24V.................. 12/24V..................12/24V IPRating:......................................................... IP66........................IP66................................. IP66...................... IP66......................IP66 Fixing:......................................... Single12mmBolt... Single12mmBolt.... Single3x6.5mmBolts...............Magnetic......FlexibleSpigot WorkingTemperatureRange:......... -30Cto+50C.......-30Cto+50C.................-30Cto+50C..... -30Cto+50C..... -30Cto+50C

WB951LEDGWB951LEDRWB952LEDRWB954LEDRWB955LEDGIssue118/06/21Original Language VersionJackSealeyLimited

Refer to instructions

4. FIXING INSTRUCTIONS 4.1. SINGLE BOLT FIXING 4.1.1. Drilla13mmmountingholeinasuitablepointonthevehicle. 4.1.2. Connecttocablesofatleast2mmsectionandusean8Afuse;checkpolarities. 4.1.3. Fixthebeaconbyusingnutsandwashersaccordingtothetypeandshapeofthemountingsurface 4.2. THREE BOLT FIXING BASE 4.2.1. Drillmountingholesusingthebeaconbaseasatemplate.Alsomakeprovisiontoroutecablesintothevehicle. 4.2.2. Connecttocablesofatleast2mmsectionandusean8Afuse;checkpolarities. 4.2.3. Fixthebeaconwith3xM6screws. 4.3. MAGNETIC BASE 4.3.1. Fittedwithhighpowermagnetstrongenoughtocopewithnormalroadspeeds. 4.3.2. Suppliedwith3mcoiledflexanduniversalauxiliarypoweroutletplug. 4.3.3. Thebeaconmustbeplacedonasurfaceparalleltotheground. 4.3.4. Thesurfaceshouldbeflatandcleantoensuregoodadherence. 4.4. FLEXIBLE BASE WITH DIN SPIGOT MOUNTING. 4.4.1. Fitasuitableadaptorsocket(SealeymodelnumberRB95B1orRB95B2)ontothevehicle.Makesureitisperfectlyvertical. 4.4.2. Usecablesofatleast2mmsectionandusean8Afuse;checkpolarities. 4.4.3. Pushthebeaconspigotdownfullyontotheadaptersocketandsecurebytighteningthewingnut. 4.4.4. Whenthebeaconisremoved,alwaysclosetheadaptersocketoutletusingtherubbercap.

5. FLASH PATTERN SELECTION FIG.1 5.1. SingleFlash120flashes/Min:Switch1on. 5.2. DualFlash:Switch2on. 5.3. Rotation:Switch3on. 5.4. QuadFlash:Switch1and2on. 5.5. MultipleFlash:Switch2and3on.

6. VOLTAGE SELECTION 6.1. Thebeaconswillswitchbetween12Vand24Vautomatically.

fig.1

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

ENVIRONMENT PROTECTION Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,takento arecyclingcentreanddisposedofinamannerwhichiscompatiblewiththeenvironment.Whentheproductbecomescompletely unserviceableandrequiresdisposal,drainanyfluids(ifapplicable)intoapprovedcontainersanddisposeoftheproductandfluids accordingtolocalregulations.

WEEE REGULATIONS DisposeofthisproductattheendofitsworkinglifeincompliancewiththeEUDirectiveonWasteElectricalandElectronicEquipment (WEEE).Whentheproductisnolongerrequired,itmustbedisposedofinanenvironmentallyprotectiveway.Contactyourlocalsolid wasteauthorityforrecyclinginformation.

N

Manualsnet FAQs

If you want to find out how the WB951LEDG Sealey works, you can view and download the Sealey WB951LEDG Beacon Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey WB951LEDG as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey WB951LEDG. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey WB951LEDG Beacon Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey WB951LEDG Beacon Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey WB951LEDG Beacon Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey WB951LEDG Beacon Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey WB951LEDG Beacon Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.