Sealey AK710.V3 Alignment Tool Instruction Manual PDF

1 of 1
1 of 1

Summary of Content for Sealey AK710.V3 Alignment Tool Instruction Manual PDF

Universal ClUtCh aligning tool set 17pC Model no: aK710.v3

thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1. safety Warning! ensure that Health and Safety, local authority and general workshop practice regulations are adhered to when using this

product. 8 Do not use this product if damaged. 9 Maintain product in good condition for best and safest performance. 9 ensure that the ignition key is removed, to prevent inadvertent engine cranking. 9 If the vehicle to be worked on is raised, ensure that it is adequately supported with axle stands or ramps and chocks. 9 Wear suitable clothing to avoid snagging. do not wear loose jewellery and tie back long hair. 9 Account for all tools and parts being used. 8 do noT use the alignment tool if you are tired or under the influence of alcohol, drugs or intoxicating medication. iMportant: Always refer to the vehicle manufacturers service instructions, or a proprietary manual, to establish the current procedure

and data. These instructions are provided as a guide only.

2. introDUCtion 2.1. Chemically blackened steel components in storage case. Aids alignment of clutch

plate for assembly.

3. Contents Alignment Adaptor Bar

Spigot Adaptor: .....................................................10.6-20mm Mandrel: ............................................................14.2-25.5mm

4. operation 4.1. Select the appropriate guide sleeve for the internal diameter of clutch plate and slide it onto the alignment adaptor bar. ensure the taper of the guide sleeve runs towards the threaded end of the adaptor bar. 4.2. Select the appropriate centring sleeve for the spigot bearing and screw it onto the end of the alignment adaptor bar. 4.3. Slide the clutch plate onto the guide sleeve, ensuring the correct orientation. 4.4. Fit the centring sleeve into the spigot bearing and slide the clutch plate, on the guide sleeve, up to the flywheel. 4.5. Fit the clutch pressure plate and cover assembly and bolt in place. 4.6. Remove the alignment tool.

AK710.V3 Issue 1 30/04/18Original Language Version Jack Sealey limited

Refer to instructions

Wear eye protection

sealey group, Kempson Way, suffolk Business park, Bury st edmunds, suffolk. ip32 7ar 01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk

environMent proteCtion Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product

Manualsnet FAQs

If you want to find out how the AK710.V3 Sealey works, you can view and download the Sealey AK710.V3 Alignment Tool Instruction Manual on the Manualsnet website.

Yes, we have the Instruction Manual for Sealey AK710.V3 as well as other Sealey manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instruction Manual should include all the details that are needed to use a Sealey AK710.V3. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Sealey AK710.V3 Alignment Tool Instruction Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Sealey AK710.V3 Alignment Tool Instruction Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Sealey AK710.V3 Alignment Tool Instruction Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Sealey AK710.V3 Alignment Tool Instruction Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Sealey AK710.V3 Alignment Tool Instruction Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.