Scheppach MT 180T 4907102900 Saw Stand Assembly Instructions PDF

1 of 8
1 of 8

Summary of Content for Scheppach MT 180T 4907102900 Saw Stand Assembly Instructions PDF

Art.Nr. 4907102900

4907102851 | 09/2014

DE Universal Sgetisch - Aufbauanleitung 4

GB Universal Saw Stand Assembly Instructions 5

FR Table de sciage universelle - Instructions de montage 6

mt 180t

4

HERSTELLER: scheppach Fabrikation von Holzbearbeitungsmaschinen GmbH Gnzburger Strae 69 D-89335 Ichenhausen

VEREHRTER KUNDE, Wir wnschen Ihnen viel Freude und Erfolg beim Arbei- ten mit Ihrem neuen Universal-Sgetisch.

ALLGEMEINE HINWEISE berprfen Sie nach dem Auspacken alle Teile auf

even tu elle Transportschden. Wenden Sie sich bei Beanstandungen an den Hndler, bei dem Sie den Universal-Sgetisch erworben haben. Sptere Rekla- mationen werden nicht anerkannt.

ACHTUNG Gert und Verpackungsmaterialien sind kein Kinder- spielzeug! Kinder drfen nicht mit Kunststoffbeuteln, Folien und Kleinteilen spielen!

Lieferumfang, Fig. 1

1. Grundrahmen 2. Fusttze 3. Handgriff 4. Rder mit Kugellager 2x 6. Laufrollen 2x 7. Radbolzen 2x 8. Handgriff (Tisch)

Flachkopfschraube (M6x35) 2x Sicherungsmuttern 2x Flachkopfschraube (M6x12) 4x Federscheiben 4x Beilagscheibe 4x Mutter M8 4x Sterngriffschraube 4x Sterngriff 2x Schlossschraube (M8x45) 4x Bogenscheibe 4x

Montage

Fig. 2 Setzen Sie die beiden Endkappen auf das Verlnge- rungsrohr und stecken Sie dieses in das Grundgestell, Befestigung mit 2 Flachkopfschrauben (M6x12) und 2 Bogenscheiben.

Fig. 3 Handgriff (3) in Grundrahmen einfhren, mit 2 Flach- kopfschrauben (M6x12) und 2 Bogenscheiben befesti- gen.

Fig. 4 Radbolzen (7) mit Kugellager und Rad (4) durch die Radbuchse im Rahmen einfhren und mit der Siche- rungsmutter (8) anziehen. Darauf achten dass sich das Rad noch bewegen lsst.

Fig. 5 - 5.1 Sichern Sie die Kreuzschlitzschraube (1) mit dem Stern- griff (c). Dies wiederholen Sie ebenso auf der anderen Seite. Gert auf Fu und Rder stellen, Sperrhebel (a) zie- hen und Arbeitsflche (b) nach oben ziehen bis diese einrastet. Achtung! Quetschgefahr Beidseitig mit den Sterngriffen (c) sichern.

Fig. 6 Verlngerungsrohr (5) in das Vierkantrohr einschieben bis die Fhrungsbuchse anliegt und mit der Sterngriff- schraube (e) sichern.

Fig. 7 Laufrollen (6) in Vierkantrohr der Verlngerung einste- cken und mit Sterngriffschrauben (e) sichern.

Fig. 8 / 8.1 Universal-Sgetisch komplett montiert in Stellung 1 (Arbeitshhe = 82 cm) Stellung 2 (Arbeitshhe = 68,5 cm) Stellung 3 (Transportstellung)

Fig. 9 Zum Verstauen stellen Sie den Universal-Sgetisch auf.

Fig. 10 Montieren Sie den Handgriff am Tisch wie auf dem Bild zu sehen mit 2 Flachkopfschrauben M6x35.

5

MANUFACTURER: scheppach Fabrikation von Holzbearbeitungsmaschinen GmbH Gnzburger Strae 69 D-89335 Ichenhausen

DEAR CUSTOMER, We wish you success and hope you will enjoy working with your new universal saw stand.

GENERAL ADVICE After opening please check all parts for possible da-

mage during shipping. In case of a grievance, ple- ase contact the retailer from whom you purchased the universal saw stand. Later complaints will not be accepted.

ATTENTION The device and the packaging materials are not toys! Children must not play with plastic bags, foils and small pieces!

Items delivered, Fig. 1

1. Base frame 2. Support pole 3. Handgrip 4. Wheels with ball bearing 2x 6. Guide rollers 2x 7. Wheel bolts 2x 8. Handgrip (table)

Pan head screw (M6x35) 2x Locking nuts 2x Pan head screw (M6x12) 4x Arc washers 4x Star knob screw 4x Star knob 2x Carriage Bolt (M8x45) 4x M8 nut 4x Spring washers 4x Flat washers 4x

Assembly

Fig. 2 Insert the two end caps into the support pole and then insert the support pole (2) with end caps into the base frame, securing it with 2 pan head screws (M6x12) and 2 arc washers.

Fig. 3 Insert the handgrip (3) into the base frame, securing it with 2 pan head screws (M6x12) and 2 arc washers.

Fig. 4 Insert the wheel bolts (7) with ball bearings and wheel (4) through the wheel socket on the frame and tighten with the locking nuts (8). Take care that the wheels are still able to move.

Fig. 5 - 5.1 Secure the Phillips-screw (1) with the star knob (c). Repeat this process also on the other side. Stand the device on the support pole and wheels, pull the ratchet lever (a) and pull the worktop (b) up until it latches. Warning! Crushing hazard Secure with star knobs (c) on both sides.

Fig. 6 Slide the extension tube (5) into the square tube as far as the guide sleeve allows and secure with the star knob screws (e).

Fig. 7 Insert the guide rollers (6) into the square tube of the extension and secure with the star knob screws (f).

Fig. 8 / 8.1 The universal saw stand assembly is complete in Position 1 (Work height = 82 cm) Position 2 (Work height = 68,5 cm) Position 3 (transport position)

Fig. 9 For storage, position the universal saw bench upwards.

Fig. 10 Assemble the handle with two pan head screws (M6x35) on the table as you can see on the picture.

6

FABRICANT: scheppach Fabrikation von Holzbearbeitungsmaschinen GmbH Gnzburger Strae 69 D-89335 Ichenhausen

CHER CLIENT, Nous vous souhaitons beaucoup de satisfaction et de russite en travaillant avec votre nouvelle table de scia- ge universelle.

REMARQUES GENERALES Lors du dballage, vrifiez toutes les pices pour

constater dventuels dommages occasionns lors du transport. En cas de rclamations, adressez-vous au revendeur qui vous avez achet la table de scia- ge universelle. Nous ne pouvons tenir compte des rclamations ultrieures.

ATTENTION Lappareil et les matriaux demballage ne sont pas des jouets pour enfants ! Les enfants ne doivent pas jouer avec les sacs en plastique, les films plastique et les petites pices !

Contenu de la livraison, Fig. 1

1. Chssis de base 2. Pied-support 3. Poigne 4. Roues quipes de roulements 2x 6. Servantes 2x 7. Axes de roues 2x 8. Poigne (table)

Vis tte conique (M6x35) 2x Ecrous autoserrants 2x Vis tte conique (M6x12) 4x Rondelles ressort 4x Rondelles 4x Ecrous M8 4x Poignes moletes 4x Poignes moletes 2x Boulons (M8x45) 4x Rondelle courbe 4x

Montage

Fig. 2 Insrez les deux bouchons en place sur les extrmi- ts du tube et emmanchez-le sur le chssis de base, fixez-le avec 2 vis tte conique (M6x12) et 2 rondel- les courbes.

Fig. 3 Insrez la poigne (3) dans le chssis de base. Fixez-la avec 2 vis tte conique (M6x12) et 2 rondelles cour- bes.

Fig. 4 Insrez les axes de roues (7) avec les roues (4) au tra- vers du tube du chssis et serrez-les avec les crous autoserrants (8). Veillez ce que les roues puissent continuer tourner.

Fig. 5 - 5.1 Fixez la vis cruciforme (1) avec la poigne-molete (c). Rptez ce processus de lautre ct. Placez lappareil sur son pied et ses roues, tirez sur le levier de blocage (a) et tirez la surface de travail (b) vers le haut jusqu ce quelle senclenche. Attention ! Risque de pincement ! Scurisez des deux cts avec les poignes moletes (c).

Fig. 6 Insrez le tube du support (5) dans le tube carr jusqu ce que le manchon soit bien positionn et bloquez-le avec la poigne molete (e).

Fig. 7 Insrez les servantes (6) dans le tube -support et fixez- le en serrant la poigne molete (e).

Fig. 8 / 8.1 La table de sciage universelle est compltement as- semble en Position 1 (hauteur de travail = 82 cm) Position 2 (hauteur de travail = 68,5 cm) Position 3 (Position de transport)

Fig. 9 Repliez et placez la table de sciage universelle la ver- ticale pour la stocker.

Fig. 10 Fixez la poigne la table comme montr en fig.10 avec 2 vis tte conique (M6x35).

scheppach Fa

Manualsnet FAQs

If you want to find out how the MT 180T Scheppach works, you can view and download the Scheppach MT 180T 4907102900 Saw Stand Assembly Instructions on the Manualsnet website.

Yes, we have the Assembly Instructions for Scheppach MT 180T as well as other Scheppach manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Assembly Instructions should include all the details that are needed to use a Scheppach MT 180T. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Scheppach MT 180T 4907102900 Saw Stand Assembly Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Scheppach MT 180T 4907102900 Saw Stand Assembly Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Scheppach MT 180T 4907102900 Saw Stand Assembly Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Scheppach MT 180T 4907102900 Saw Stand Assembly Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Scheppach MT 180T 4907102900 Saw Stand Assembly Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.