S24LED11
Thank You for purchasing your new Sandstrm TV.
Your new TV incorporates the latest technology to enhance your viewing experience. We would suggest that you allow about 20 mins for initial setup.
Please follow this guide for a successful first time installation.
Well done, your new TV is now ready to use. You will find that there are many exciting features available. To get to know all these features, please take some time to read the instruction manual provided with your TV.
If after reading the instruction manual you have additional questions related to the use of your TV please call our UK Call Centre on 0844 561 1234. Our UK Customer Contact Centre is open Monday-Saturday 8am-8pm or Sunday 8am-6pm.
Quick Start Guide
1 Unpacking
2 Operating Your Remote Control
4 Connecting the Aerial 5 Connecting to the Mains Socket
7 Target Region Descriptor6 Turning the TV On for the First Time
Tip:
24 HD LED TV with integrated DVD player
3 Installing the Base Stand
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to any local regulations.
TV
Quick Start GuideTV Base
Screw A x 3 Digital TV Switchcover AddendumRemote Control /
AAA Batteries x 2
Instruction Manual
(P.N.: 81626000002)
The first time you turn the TV on, it will go straight into the First Time Installation menu. Please ensure the aerial is plugged in and then press the OK button.
Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the RF IN (75) socket on the rear right side of your TV.
Press and lift the back cover to open the battery compartment of the remote control.
Insert two AAA size batteries. Close the battery compartment cover.
1.
1.
3. Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found.
4. After tuning is complete, the channels are arranged in the broadcaster's preset order. If you wish to skip channels, modify the preset order or rename channels, select Program Edit under the Channel menu (refer to page 20-21 for details).
2. In the Country menu, press the buttons to select the country where you will operate the TV. The default country is set as UK. Press the OK button to confirm.
2.
2.
1.
2.
3.
Connect the mains cable to the mains socket after you have completed all the connections.
Switch on the POWER ON/OFF switch which is located at the bottom under the frame. At this stage, the TV switches to standby mode. The red LED indicator will illuminate on the front panel of the TV.
In standby mode, press the button on the bottom panel of the TV or the POWER button on the remote control to turn the TV on. The red LED indicator will turn green.
Lay the TV down on a flat surface with the back side facing up. Please make sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen.
Align the screw holes and then secure the base stand with the provided 3 screws.
Install the batteries correctly by following the polarity (+ and -) indications in the battery compartment.
Do not connect the TV to the mains supply until you have completed all the connections.
Screw A x 3 (P.N.: 4T254000061)
Screw
OFF ON
1. In the Tune Type menu, press the buttons to select DTV + ATV / DTV / ATV. Press the button and then press the buttons to select the language for the On Screen Display. Press the OK button to confirm.
OK Select
Country
RumaniaNorway
Poland Russian
Portugal Serbia
Slovenia
Lithuanian
Latvian
Spain
Sweden
Switzerland
UK
NewZealand
United Arab Emirates
Channel Tuning
ATV : 0 Programme(s)
DTV : 0 Programme(s)
Radio : 0 Programme(s)
Data : 0 Programme(s) 1 %... 482.00 MHz (ATV)
RF coaxial cable (not included)
HDMI1 HDMI2 VGA Y/Pb/Pr A/V IN HP USB
Common Interface
PC audio
OR
English Franais Magyar
Espaol Hrvatski Nederlands
Cesky
Dansk
Deutsch Italiano Norsk
Polski
Portugus
Pycc
Tune Type DTV + ATV
OK Select
Ek
During tuning your TV may have received signals from more than one transmitter. If this has occurred the Target Region Descriptor screen will be displayed. This will enable you to select the correct regional transmission for the local news service that you require.
Press the buttons to adjust each option's setting and then press the OK button to confirm.
Target Region Setting
Country Code GBR
Primary Region England
Secondary Region
Tertiary Region
London
This will be shown as GBR for the UK.
This will show the regional country (England, Wales, Scotland, NI).
This will allow you to set the region