Contents

Samsung HW-A50M Soundbar User Manual PDF

1 of 44
1 of 44

Summary of Content for Samsung HW-A50M Soundbar User Manual PDF

HW-A50M

FULL MANUAL

Imagine the possibilities Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at www.samsung.com/register

ENG - ii

SAFETY INFORMATION The following also applies to the Wireless

Subwoofer (PS-WT55D).

SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product.

CAUTION RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that this product comes with important literature concerning operation and maintenance.

Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground).

AC voltage : Rated voltage marked with this symbol is AC voltage.

DC voltage : Rated voltage marked with this symbol is DC voltage.

Caution. Consult Instructions for use : This symbol instructs the user to consult the user manual for further safety related information.

WARNING To reduce the risk of fire or electric shock, do

not expose this appliance to rain or moisture. To prevent injury, this apparatus must be

securely attached to the floor/wall in accordance with the installation instructions.

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

CAUTION Do not expose this apparatus to dripping or

splashing. Do not put objects filled with liquids, such as vases, on the apparatus.

To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.

FCC NOTE (for U.S.A):

FCC Suppliers Declaration of Conformity

Responsible Party - U.S. Contact Information: Samsung Electronics America, Inc. 85 Challenger Road. Ridgefield Park, NJ 07660 Phone: 1-800-SAMSUNG (726-7864)

FCC Compliance Statement : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ENG - iii

FCC Caution : Any changes or modifications not expressly

approved by the party responsible for compliance could void the users authority to operate this equipment.

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

Class B FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorienting or relocating the receiving antenna.

Increasing the separation between the equipment and receiver.

Connecting the equipment to an outlet that is on a different circuit than the radio or TV.

Consulting the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

CALIFORNIA USA ONLY (Applicable for networking models only.) This Perchlorate warning applies only to primary CR(Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/ perchlorate. Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website:www.samsung.com/ recycling Or call, 1800SAMSUNG

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.

Install in accordance with the manufacturers instructions.

ENG - iv

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

PRECAUTIONS 1. Ensure that the AC power supply in your

house complies with the power requirements listed on the identification sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.

2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit.

3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction.

4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using.

5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. CAUTION : Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.

ENG - v

ABOUT THIS MANUAL The user manual has two parts: simple paper USER MANUAL and a detailed FULL MANUAL you can download.

USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications.

FULL MANUAL You can access the FULL MANUAL on Samsungs on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsungs website. (http://www.samsung.com/support)

Design and specifications are subject to change without prior notice.

ENG - vi

CONTENTS

01 Checking the Components 2

Inserting Batteries before using the Remote Control (AA batteries X 2) ------------------------- 2

02 Product Overview 3

Front Panel / Top Panel of the Soundbar ------------------------- 3

Bottom Panel of the Soundbar ------------------------- 4

03 Connecting the Soundbar 5

Connecting Electrical Power ------------------------- 5

Connecting the Soundbar to the Subwoofer ------------------------- 6 Automatic connection between the Subwoofer and the Soundbar ------------------------- 6 Manually connecting the Subwoofer if automatic connection fails ------------------------- 7

Connecting an SWA-9100S (Sold Separately) to your Soundbar ------------------------- 9

04 Connecting to your TV 11

Method 1. Connecting with a Cable ------------------------- 11 Connecting using an Optical Cable ------------------------- 11 Connecting a TV using an HDMI Cable ------------------------- 12

Method 2. Connecting Wirelessly ------------------------- 14 Connecting a TV via Bluetooth ------------------------- 14

05 Connecting an External Device 16

Connecting using an Optical Cable ------------------------- 16

Connecting using an HDMI Cable ------------------------- 17

06 Connecting a USB Storage Device 18

ENG - vii

07 Connecting a Mobile Device 19

Connecting via Bluetooth ------------------------- 19

08 Using the Remote Control 23

How to Use the Remote Control ------------------------- 23

Adjusting the Soundbar volume with a TV remote control ------------------------- 26

Using the Hidden Buttons (Buttons with more than one function) ------------------------- 27

Output specifications for the different sound effect modes ------------------------- 27

09 Installing the Wall Mount 28

Installation Precautions ------------------------- 28

Wallmount Components ------------------------- 28

10 Software Update 30

How to check the Firmware version ------------------------- 30

Update Procedure ------------------------- 31

If UPDATE is not displayed ------------------------- 31

11 Troubleshooting 32

12 License 34

13 Open Source License Notice 35

14 Important Notes About Service 35

15 SpecificationsandGuide 36

Specifications ------------------------- 36

ENG - 2

01 CHECKING THE COMPONENTS

VOL WOOFER

SOUNDBAR

SOUND MODE

PAIR

Soundbar Main Unit Subwoofer Remote Control / Batteries (AH81-09748A)

x 2

Power Cord (Subwoofer, Soundbar)

(AH81-09821A)

AC/DC Adapter (Soundbar)

(AH81-09747A)

Optical Cable (AH81-09754A)

x 2 (M4 x L10)

x 2 x 2

Wall Mount Guide Holder-Screw Screw Bracket-Wall Mount

(AH81-09749A)

For more information about the power supply and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit)

To purchase additional components or optional cables, contact a Samsung Service Center or Samsung Customer Care.

Depending on the region, the appearance of the AC plug may differ from the plug displayed above, or it may be supplied integrated with the AC/DC adapter.

The appearance of the accessories may differ slightly from the illustrations above.

Inserting Batteries before using the Remote Control (AA batteries X 2)

Slide the back cover in the direction of the arrow

until it is completely removed. Insert 2 AA batteries

(1.5V) oriented so that their polarity is correct. Slide

the back cover back into position.

ENG - 3

02 PRODUCT OVERVIEW

Front Panel / Top Panel of the Soundbar

Position the product so that the SAMSUNG logo is located on the top. Top Panel

Display Displays the products status and current mode.

(Power) Button Turns the power on and off.

Auto Power Down Function The unit turns off automatically in the following situations:

In D.IN / HDMI / BT / USB Mode : If there is no audio signal for 20 minutes.

(Volume) Button

Adjusts the volume. When adjusted, the volume level appears on the Soundbars front display.

(Source) Button Selects the source input mode.

Input mode Display

Optical Digital input D.IN

ARC (HDMI OUT) input D.IN TV ARC (Auto conversion)

HDMI input HDMI

BLUETOOTH mode BT

USB mode USB

To turn on BT PAIRING mode, change the source to BT mode, and then press and hold the (Source) button for more than 5 seconds.

When you plug in the AC cord, the power button will begin working in 4 to 6 seconds. When you turn on this unit, there will be a 4 to 5 second delay before it produces sound. If you want to enjoy sound only from the Soundbar, you must turn off the TVs speakers in the Audio

Setup menu of your TV. Refer to the owners manual supplied with your TV.

ENG - 4

Bottom Panel of the Soundbar

DC 24V

HDMI

USB (5V 0.5A)

DIGITAL AUDIO IN (OPTICAL)

HDMI TO TV (ARC)

DC 24V

HDMI OUT (TV-ARC)AUX IN

HDMI IN

USB (5V 0.5A)

DIGITAL AUDIO IN (OPTICAL)

HDMI

HDMI TO TV (ARC)

DIGITAL AUDIO IN (OPTICAL) Connect to the digital (optical) output of an external device.

USB (5V 0.5A) Connect a USB device here to play music files stored on the USB device through the Soundbar.

HDMI Inputs digital video and audio signals simultaneously using an HDMI cable. Connect to the HDMI output of an external device.

HDMI TO TV (ARC) Connect to the HDMI (ARC) port on a TV.

DC 24V (Power Supply In) Connect the AC/DC power adapter.

When disconnecting the power cable of the AC/DC power adapter from a wall outlet, pull the plug. Do not pull the cable.

Do not connect this unit or other components to an AC outlet until all connections between components are complete.

ENG - 5

03 CONNECTING THE SOUNDBAR

Connecting Electrical Power Use the power components to connect the Subwoofer and Soundbar to an electrical outlet in the following order:

1. Connect the power cord to the Subwoofer.

2. Connect the power output cable to the power adapter, and then to the Soundbar.

3. Connect the power cord to a wall socket. See the illustrations below.

For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Bottom of the Soundbar Main Unit)

POWER

Rear of Subwoofer

Power Cord

Connecting Electrical Power

Bottom of the Soundbar Main Unit AC/DC Adapter

Connecting Electrical Power

DC 24V

USB (5V 0.5A)

DIGITAL AUDIO IN (OPTICAL)

HDMI

HDMI TO TV (ARC)

DC 24V Power Cord

Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter and cause the Adapter to malfunction.

ENG - 6

Connecting the Soundbar to the Subwoofer When the subwoofer is connected, you can enjoy rich bass sound.

Automatic connection between the Subwoofer and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and subwoofer, the subwoofer is automatically connected to the Soundbar.

When auto pairing is complete, the blue indicators at the rear of the subwoofer turn on.

LED Indicator Lights on the Rear of Subwoofer

LED Status Description Resolution

Blue

On Successfully connected (normal operation)

-

Blinking Recovering the connection

Check if the power cable attached to the main Soundbar unit is connected properly or wait about 5 minutes. If blinking persists, try manually connecting the subwoofer. See page 7.

Red On

Standby (with the Soundbar main unit turned off)

Check if the power cable attached to the main Soundbar unit is connected properly.

Connection failed Connect again. See the instructions for manual connection on page 7.

Red and blue

Blinking Malfunction See the contact information for the Samsung Service Center in this manual.

ENG - 7

Manually connecting the Subwoofer if automatic connection fails

Before performing the manual connection procedure below:

Check whether the power cables for the Soundbar and subwoofer are connected properly. Make sure that the Soundbar is turned on.

1. Press and hold ID SET on the rear of the subwoofer for at least 5 seconds. The red indicator on the rear of the subwoofer turns off and the blue indicator blinks.

5 Sec

Rear of Subwoofer

2. Press and hold the Up button on the remote control for at least 5 seconds. The ID SET message appears on the display of the Soundbar for a moment, and then it

disappears. The Soundbar will automatically power on when ID SET is complete.

ID SET SOUND

MODE

PAIR 5 Sec

SAMSUNG logo is on the top

3. Check if the LINK LED is solid blue (connection complete).

Blue is On

The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Subwoofer.

ENG - 8

NOTES Do not connect the power cord of this product or your TV to a wall outlet until all connections

between components are complete. Before moving or installing this product, be sure to turn off the power and disconnect the power cord. If the main unit is powered off, the wireless subwoofer will go into stand-by mode and the

STANDBY LED on the rear of the sub-woofer will turn red after blinking blue several times. If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar,

interference may cause some sound interruption. The maximum transmission distance of the main units wireless signal is about 32.8 ft (10 m), but

may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer, the system may not operate at all because the wireless signal cannot penetrate metal.

PRECAUTIONS Wireless receiving antennas are built into the wireless subwoofer. Keep the unit away from water

and moisture. For optimal listening performance, make sure that the area around the wireless subwoofer and the

Wireless Receiver Module (sold separately) is clear of any obstructions.

ENG - 9

Connecting an SWA-9100S (Sold Separately) to your Soundbar Expand to true wireless surround sound by connecting the Samsung Wireless Rear Speaker Kit (SWA-9100S, sold separately) to your Soundbar.

1. Connect the Wireless Receiver Module to 2 Surround Speakers. When connecting the speaker cable, connect the core wire to the speaker.

SURROUND-RIGHT SURROUND-RIGHT

The speaker cables are color coded.

SURROUND-LEFT

ID SET

L R

SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3

POWER

ID SET

L R

SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3

SURROUND-RIGHT

SURROUND-LEFT SURROUND-RIGHT

2. Check the standby status of the Wireless Receiver Module after plugging it into an electrical outlet. The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not

blink, press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue). For more about the LED, please refer to the SWA-9100S user manual.

ID SET

L R

SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3

POWER

POWER

ID SET

SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3

STANDBY

LINK

STANDBY

LINK

Blue blinking

5 Sec

ENG - 10

3. Press and hold the Up button on the remote control for at least 5 seconds. The ID SET message appears on the display of the Soundbar for a moment, and then it

disappears. The Soundbar will automatically power on when ID SET is complete.

ID SET SOUND

MODE

PAIR 5 Sec

SAMSUNG logo is on the top

CAUTION

If your Soundbar was playing music when it connects to the SWA-9100S, you may hear some stuttering from the woofer as the connection finalizes.

4. Check if the LINK LED is solid blue (connection complete).

STANDBY

LINK

STANDBY

LINK

Blue is On

The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Receiver Module.

5. If the SWA-9100S is not connected, repeat the procedure from Step 2.

ENG - 11

04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections.

When the Soundbar is connected to selected Samsung TVs, the Soundbar can be controlled using the TVs remote control.

This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable.

This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute.

Method 1. Connecting with a Cable

Connecting using an Optical Cable

Pre-connection Checklist When both the HDMI cable and optical cable are connected, the HDMI signal is received first. When you use an optical cable and the terminals have covers, be sure to remove the covers.

AUX IN

USB (5V 0.5A)

DIGITAL AUDIO IN (OPTICAL)

OPTICAL OUT

Optical Cable

Bottom of the Soundbar

Top of the Soundbar

D.IN

1. Connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar to the OPTICAL OUT port of the TV with a digital optical cable.

2. Press the (Source) button on the top panel or remote control, and then select the D.IN mode.

ENG - 12

Connecting a TV using an HDMI Cable

CAUTION

When both the HDMI cable and optical cable are connected, the HDMI signal is received first. To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals

marked ARC. Otherwise, the TV sound may not be output. The recommended cable is High Speed HDMI Cable with Ethernet.

HDMI TO TV (ARC)

HDMI IN (ARC)

Connect to the HDMI IN (ARC) port of your TV.

Bottom of the Soundbar

Connect to the HDMI TO TV (ARC) port of the Soundbar main unit.

Top of the Soundbar

HDMI Cable (not supplied)

TV ARC

1. With the Soundbar and TV turned on, connect the HDMI cable (not supplied) as shown in the figure. 2. TV ARC appears in the display window of the Soundbar main unit and the Soundbar plays TV

sound. If TV sound is inaudible, press the (Source) button on the remote control or on the top of

the Soundbar to switch to D.IN mode. The screen displays D.IN and TV ARC in sequence, and TV sound is played.

If TV ARC does not appear in the display window of the Soundbar main unit, confirm that the HDMI cable (not supplied) is connected to the correct port.

Use the volume buttons on the TVs remote control to change the volume on the Soundbar.

ENG - 13

NOTES HDMI is an interface that enables the digital transmission of video and audio data with just a single

connector. If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port. We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one

whose diameter is less than 0.55 inches (14 mm). This function is not available if the HDMI cable does not support ARC. When the audio in a broadcast is encoded in Dolby Digital and the Digital Output Audio Format on

your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.)

ENG - 14

Method 2. Connecting Wirelessly

Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

Only one TV can be connected at a time.

SOUND MODE

PAIR

OR

The initial connection

1. Press the PAIR button on the remote control to enter the BT PAIRING mode.

(OR) a. Press the (Source) button on the top panel and then select BT. BT changes to BT PAIRING in a few seconds automatically or changes to BT READY if there is a connect record.

b. When BT READY appears, press and hold the (Source) button on the top panel of the Soundbar for more than 5 seconds to display BT PAIRING.

2. Select Bluetooth mode on the TV. (For more information, see the TVs manual.) 3. Select [AV] Samsung Soundbar A5-Series from the list on TVs screen.

An available Soundbar is indicated with Need Pairing or Paired on the TVs Bluetooth device list. To connect the TV to the Soundbar, select the message, and then establish a connection.

When the TV is connected, [TV Name] BT appears on the Soundbars front display. 4. You can now hear TV sound from the Soundbar.

If the device fails to connect If a previously connected Soundbar listing (e.g. [AV] Samsung Soundbar A5-Series) appears in

the list, delete it. Then repeat steps 1 through 3.

NOTE After you have connected the Soundbar to your TV the first time, use the BT READY mode to

reconnect.

ENG - 15

Disconnecting the Soundbar from the TV Press the (Source) button on the top panel or on the remote control and switch to any mode but BT.

Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.)

To cancel the automatic Bluetooth connection between the Soundbar and TV, press the Left button on the remote control for 5 seconds with the Soundbar in BT READY status. (Toggle On Off)

What is the difference between BT READY and BT PAIRING? BT READY : In this mode, you can search for previously connected TVs or connect a previously

connected mobile device to the Soundbar. BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button

on the remote control or press and hold the (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in BT mode.)

NOTES If asked for a PIN code when connecting a Bluetooth device, enter <0000>. In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the

Soundbar and the Bluetooth device exceeds 32.8 ft (10 meters). The Soundbar automatically turns off after 20 minutes in the Ready state. The Soundbar may not perform Bluetooth search or connection correctly under the following

circumstances: If there is a strong electrical field around the Soundbar. If several Bluetooth devices are simultaneously paired with the Soundbar. If the Bluetooth device is turned off, not in place, or malfunctions.

Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

ENG - 16

05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via a wired connection or Bluetooth connection to play the external devices sound through the Soundbar.

Connecting using an Optical Cable

AUX IN

USB (5V 0.5A)

DIGITAL AUDIO IN (OPTICAL)

OPTICAL OUT Optical Cable

Bottom of the Soundbar

Top of the Soundbar

BD / DVD player / Set-top box / Game console

D.IN

1. Connect DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT port of the Source Device using a digital optical cable.

2. Select D.IN mode by pressing the (Source) button on the top panel or on the remote control.

ENG - 17

Connecting using an HDMI Cable

HDMI

HDMI TO TV (ARC)

HDMI OUT

HDMI IN (ARC)

HDMI Cable (not supplied)

HDMI Cable (not supplied)

Bottom of the Soundbar

External Device

Top of the Soundbar

HDMI

1. Connect an HDMI cable (not supplied) from the HDMI port on the back of the product to the HDMI OUT port on your digital device.

2. Connect an HDMI cable (not supplied) from the HDMI TO TV (ARC) port on the back of the product to the HDMI IN port on your TV.

3. Press the (Source) button on the top panel or on the remote control, and then select HDMI. 4. HDMI mode is displayed on the Soundbar display panel and sound plays.

ENG - 18

06 CONNECTING A USB STORAGE DEVICE You can play music files located on USB storage devices through the Soundbar.

USB port DC 24V

HDMI

USB (5V 0.5A)

DIGITAL AUDIO IN (OPTICAL)

HDMI TO TV (ARC)

HDMI IN

USB (5V 0.5A)

DIGITAL AUDIO IN (OPTICAL)

USB

1. Connect the USB device to the USB port on the bottom of the product. 2. Press the (Source) button on the top panel or on the remote control, and then select USB. 3. USB appears in the display screen. 4. Play music files from the USB storage device through the Soundbar.

The Soundbar automatically turns off (Auto Power Down) if no USB device has been connected for more than 20 minutes.

File Format Type Compatibility list

Extension Codec Sampling Rate Bitrate

*.mp3 MPEG 1 Layer2 16kHz ~ 48kHz 80kbps~320kbps

MPEG 1 Layer3 16kHz ~ 48kHz 80kbps~320kbps

MPEG 2 Layer3 16kHz ~ 48kHz 80kbps~320kbps

MPEG 2.5 Layer3 16kHz ~ 48kHz 80kbps~320kbps

*.wma Wave_Format_MSAudio1 16kHz ~ 48kHz 56kbps~128kbps

Wave_Format_MSAudio2 16kHz ~ 48kHz 56kbps~128kbps

*.aac AAC 16kHz ~ 96kHz 48kbps~320kbps

AAC-LC 16kHz ~ 96kHz 128kbps~192kbps 5.1ch 320kbps

HE-AAC 24kHz ~ 96kHz 48kbps~64kbps 5.1ch 160kbps

*.wav - 16kHz ~ 48kHz up to 3000kbps

*.flac FLAC 32kHz ~ 192kHz 162kbps ~ 8,100kbps

*.aiff AIFF 32kHz ~ 192kHz 1,024kbps ~ 9,216kbps

*.ogg OGG 1.1.0 16kHz ~ 48kHz 50kbps~500kbps

If there are too many folders (about 200) and files (about 2000) stored on the USB device, it may take the Soundbar some time to access and play files.

ENG - 19

07 CONNECTING A MOBILE DEVICE

Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

The connection is limited to one TV or two Bluetooth devices at the same time.

SOUND MODE

PAIR

OR Bluetooth device

The initial connection 1. Press the PAIR button on the remote control to enter the BT PAIRING mode.

(OR) a. Press the (Source) button on the top panel and then select BT. BT changes to BT PAIRING in a few seconds automatically or changes to BT READY if there is a connect record.

b. When BT READY appears, press and hold the (Source) button on the top panel of the Soundbar for more than 5 seconds to display BT PAIRING.

2. On your device, select [AV] Samsung Soundbar A5-Series from the list that appears. When the Soundbar is connected to the Bluetooth device, [Bluetooth Device Name] BT

appears in the front display. 3. Play music files from the device connected via Bluetooth through the Soundbar.

If the device fails to connect If a previously connected Soundbar listing (e.g. [AV] Samsung Soundbar A5-Series) appears in

the list, delete it. Then repeat steps 1 and 2.

NOTE After you have connected the Soundbar to your mobile device the first time, use the BT READY

mode to reconnect.

ENG - 20

What is the difference between BT READY and BT PAIRING? BT READY : In this mode, you can search for previously connected TVs or connect a previously

connected mobile device to the Soundbar. BT PAIRING : In this mode, you can connect a new device to the Soundbar. (Press the PAIR button

on the remote control or press and hold the (Source) button on the top of the Soundbar for more than 5 seconds while the Soundbar is in BT mode.)

NOTES If asked for a PIN code when connecting a Bluetooth device, enter <0000>. In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the

Soundbar and the Bluetooth device exceeds 32.8 ft (10 m). The Soundbar automatically turns off after 20 minutes in the Ready state. The Soundbar may not perform Bluetooth search or connection correctly under the following

circumstances: If there is a strong electrical field around the Soundbar. If several Bluetooth devices are simultaneously paired with the Soundbar. If the Bluetooth device is turned off, not in place, or malfunctions.

Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

The Soundbar supports SBC data (44.1kHz, 48kHz). Connect only to a Bluetooth device that supports the A2DP (AV) function. You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free)

function. Once you have paired the Soundbar to a Bluetooth device, selecting [AV] Samsung Soundbar

A5-Series from the devices scanned devices list will automatically change the Soundbar to BT mode.

Available only if the Soundbar is listed among the Bluetooth devices paired devices. (The Bluetooth device and the Soundbar must have been previously paired at least once.)

The Soundbar will appear in the Bluetooth devices searched devices list only when the Soundbar is displaying BT READY.

Bluetooth Power On (SOUND MODE) If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth Power On function is on and the Soundbar is turned off, the Soundbar turns on automatically.

1. Press and hold the SOUND MODE button for more than 5 seconds on the remote while the Soundbar is turned on.

2. ON-BLUETOOTH POWER appears on the Soundbars display.

ENG - 21

Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth devices user manual.

The Soundbar will be disconnected. When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display

BT DISCONNECTED on the front display.

Disconnecting the Soundbar from the Bluetooth device Press the (Source) button on the top panel or on the remote control, and then change to any mode except BT.

Disconnecting takes time because the Bluetooth device must receive a response from the Soundbar. (Disconnection time may differ, depending on the Bluetooth device)

When the Soundbar is disconnected from the Bluetooth device, the Soundbar will display BT DISCONNECTED on the front display.

NOTES In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the

Soundbar and the Bluetooth device exceeds 32.8 ft (10 m). The Soundbar automatically turns off after 20 minutes in the Ready state.

More About Bluetooth Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a short wireless connection.

A Bluetooth device may cause noise or malfunction, depending on usage, if: A part of your body is in contact with the receiving/transmitting system of the Bluetooth

device or the Soundbar. It is subject to electrical variation from obstructions caused by a wall, corner, or office partition. It is exposed to electrical interference from same frequency-band devices including medical

equipment, microwave ovens, and wireless LANs. Pair the Soundbar with the Bluetooth device while they are close together. The further the distance between the Soundbar and Bluetooth device, the worse the quality is.

If the distance exceeds the Bluetooth operational range, the connection is lost. In poor reception areas, the Bluetooth connection may not work properly. The Bluetooth connection only works when it is close to the unit. The connection will be

automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors.

This wireless device may cause electric interference during its operation.

ENG - 22

Bluetooth Multi connection The Soundbar can be connected to 2 Bluetooth devices at the same time.

Bluetooth device A Bluetooth device B

1. Connect the Soundbar to up to two Bluetooth devices. (See page 19) 2. Play music from one of the connected Bluetooth devices while two devices are connected. 3. If music is played from the Bluetooth device B while playing from the device A, the music is

started playing on the device B and automatically being stopped/paused playback on the device A.

4. In versions prior to AVRCP V1.4, the switching time of the device playing music may be delayed.

Bluetooth Multi Pairing How to pair multiple devices to the Soundbar

1. Turn on the Soundbar. 2. Only in BT mode, press and hold the (Source) button on the top of the Soundbar for more

than 5 seconds for the Soundbar to go into BT PAIRING mode, then on the Bluetooth device side, switch Bluetooth on, and select the Soundbar from the list of available devices, the Soundbar will automatically connect to the Bluetooth device.

3. A 2nd Bluetooth device can be paired and connected to the Soundbar using the same method. If you attempt to connect a 3rd device, a connected device that is not playing audio will lose its Bluetooth connection, but will still be paired with the Soundbar.

4. Using the same method, you can pair up to 8 Bluetooth devices, but only the last 2 will stay connected to the Soundbar at the same time.

NOTES Only 1 Samsung TV, or 2 Bluetooth devices can be connected to the Soundbar at one time. The Soundbar will be disconnected from Bluetooth devices when it receives a connection request

from a Samsung TV. The default of Soundbar is ON-BT MULTI CONNECTION, but for rrestoration to non-multi

connection mode from another mode, press and hold the PAIR button on the remote control for more than 5 seconds in standby mode, until OFF-BT MULTI CONNECTION appears in the display.

ENG - 23

08 USING THE REMOTE CONTROL

How to Use the Remote Control

VOL WOOFER

SOUNDBAR

SOUND MODE

PAIR

Power

VOL WOOFER

SOUND MODE

PAIR

Turns the Soundbar on and off.

VOL WOOFER

SOUND MODE

PAIR

Source

Press to select a source connected to the Soundbar.

Mute

VOL WOOFER

SOUND MODE

PAIR

Press the (Mute) button to mute the sound. Press it again to unmute the sound.

SOUND MODE

VOL WOOFER

SOUND MODE

PAIR

Press to cycle through the available sound modes: SURROUND SOUND, or STANDARD.

SURROUND SOUND Provides a wider sound field than standard.

STANDARD Outputs the original sound.

DRC (Dynamic Range Control) Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the SOUND MODE button for more than 5 seconds while the Soundbar is powered off to turn DRC (Dynamic Range Control) on or off. With the DRC turned on, loud sound is reduced. (The sound may be distorted.)

Bluetooth Power This feature automatically turns the Soundbar on when it receives a connection request from a previously connected TV or Bluetooth device. The setting is On by default.

Press and hold the SOUND MODE button for more than 5 seconds to turn off the Bluetooth Power function.

ENG - 24

VOL WOOFER

SOUND MODE

PAIR

Bluetooth PAIR

Press the PAIR button. BT PAIRING appears in the Soundbars display. You can connect the Soundbar to a new Bluetooth device in this mode by selecting the Soundbar from the Bluetooth device's search list.

Play / Pause

VOL WOOFER

SOUND MODE

PAIR

Press the p button to pause a music file temporarily. When you press the button again, the music file plays.

VOL WOOFER

SOUND MODE

PAIR

Up/Down/ Left/Right

Press the indicated areas to select Up/Down/Left/Right.

Press Up/Down/Left/Right on the button to select or set functions. Repeat

To use the Repeat function in USB mode, press the Up button. Music Skip

Press the Right button to select the next music file. Press the Left button to select the previous music file.

ID SET Press and hold the Up button for 5 seconds to complete ID SET (when connecting to a wireless subwoofer or wireless rear speakers).

Sound Control

VOL WOOFER

SOUND MODE

PAIR

When pressed, the settings TREBLE, BASS, and AUDIO SYNC are displayed in sequence. The desired settings can be adjusted using the Up/Down buttons.

To control the volume of the treble or bass sound, press the (Sound Control) button to select TREBLE or BASS and then adjust the volume between -6~+6 by using the Up/ Down buttons.

Press and hold the (Sound Control) button for about 5 seconds to adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are selectable using the Left/Right buttons and each can be adjusted to a setting between -6 to +6 using the Up/Down buttons. (Make sure the Sound mode is set to STANDARD.)

If the video on the TV and audio from the Soundbar are not synchronized, press the Sound Control button to select AUDIO SYNC and then set the audio delay between 0~300milliseconds by using the Up/Down buttons. (Not available in USB or BTmode.)

AUDIO SYNC is only supported for some functions.

ENG - 25

VOL WOOFER

SOUND MODE

PAIR

WOOFER (BASS) LEVEL

SOUND

MODE

VOL

WOOFER

SOUNDBAR

SOUND

MODE

VOL

WOOFER

SOUNDBAR

SOUND

MODE

VOL

WOOFER

SOUNDBAR

SOUND

MODE

VOL

WOOFER

SOUNDBAR

Push the button up or down to adjust the level of the woofer (bass) to -12 or between -6 to +6. To set the woofer (bass) volume level to 0 (Default), press the button.

VOL WOOFER

SOUND MODE

PAIR

VOL (Volume)

SOUND

MODE

VOL

WOOFER

SOUNDBAR

SOUND

MODE

VOL

WOOFER

SOUNDBAR

SOUND

MODE

VOL

WOOFER

SOUNDBAR

SOUND

MODE

VOL

WOOFER

SOUNDBAR

Push the button up or down to adjust the volume. Mute

Press the VOL button in to mute the sound. Press it in again to unmute the sound.

ENG - 26

Adjusting the Soundbar volume with a TV remote control Adjust the Soundbar volume using the TVs remote control.

This function can be used with IR remote controls only. Bluetooth remote controls (remote controls that require pairing) are not supported.

Set the TV speaker to External Speaker to use this function. Manufacturers supporting this function:

VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA, Hisense, RCA

1. Turn Off the Soundbar. 2. Push up and hold the WOOFER button for 5 seconds.

Each time you push the WOOFER button up and hold it for 5 seconds, the mode switches in the following order: OFF-TV REMOTE (Default mode), SAMSUNG-TV REMOTE, ALL-TV REMOTE.

Remote Control Button Display Status

SOUND

MODE

VOL

WOOFER

SOUNDBAR

5 Sec OFF-TV REMOTE (Default mode)

Disable the TV remote control.

SOUND

MODE

VOL

WOOFER

SOUNDBAR

5 Sec SAMSUNG-TV REMOTE Enable a Samsung TVs IR remote

control.

SOUND

MODE

VOL

WOOFER

SOUNDBAR

5 Sec ALL-TV REMOTE Enable a third-party TVs IR remote

control.

ENG - 27

Using the Hidden Buttons (Buttons with more than one function)

Hidden Button Reference page

Remote Control Button Function

WOOFER (Up) TV remote control On/Off (Standby) page 26

Left TV Auto connect On/Off (BT Ready) page 15

Up ID SET page 24

(Sound Control) 7 Band EQ page 24

SOUND MODE DRC ON/OFF (Standby) page 23

Bluetooth Power page 23

PAIR Bluetooth Multi-connection On/Off

(Standby) page 22

Outputspecificationsforthedifferentsoundeffectmodes

Effect Input

Output

Without Wireless Rear Speaker Kit

With Wireless Rear Speaker Kit

SOUND MODE

Surround

VOL WOOFER

SOUND MODE

Bluetooth POWER

SURROUND SOUND

2.0 ch 2.1 ch 4.1 ch

5.1 ch 2.1 ch 4.1 ch

STANDARD 2.0 ch 2.1 ch 2.1 ch

5.1 ch 2.1 ch 2.1 ch

The Samsung Wireless Rear Speaker Kit can be purchased separately. To purchase a Kit, contact the vendor you purchased the Soundbar from.

ENG - 28

09 INSTALLING THE WALL MOUNT

Installation Precautions Install on a vertical wall only. Do not install in a place with high

temperature or humidity. Verify whether the wall is strong enough to

support the products weight. If not, reinforce the wall or choose another installation point.

Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster board, iron board, wood, etc.). If possible, fix the support screws into wall studs.

Purchase wall mounting screws according to the type and thickness of the wall you want to mount the Soundbar on.

Diameter: M5 Length: 1 3/8 inches (35 mm) or longer

recommended. Connect cables from the unit to external

devices before you install the Soundbar on the wall.

Make sure the unit is turned off and unplugged from the power source before you install it. Otherwise, it may cause an electric shock.

Wallmount Components

Wall Mount Guide

x 2 (M4 x L10)

x 2

Holder-Screw Screw

x 2

Bracket-Wall Mount

(AH81-09749A)

1. Place the Wall Mount Guide against the wall surface.

The Wall Mount Guide must be level. If your TV is mounted on the wall, install

the Soundbar at least 2 inches (5 cm) below the TV.

2 inches (5 cm) or more

ENG - 29

2. Align the Wall Mount Guides Center Line with the center of your TV (if you are mounting the Soundbar below your TV), and then fix the Wall Mount Guide to the wall using tape.

If you are not mounting below a TV, place the Center Line in the center of the installation area.

Center Line

3. Push a pen tip or sharpened pencil tip through the center of the B-TYPE images on each end of the Guide to mark the holes for the supporting screws, and then remove the Wall Mount Guide.

4. Using an appropriately sized drill bit, drill a hole in the wall at each marking.

If the markings do not correspond to the positions of studs, make sure you insert appropriate anchors into the holes before you insert the support screws. If you use anchors, make sure the holes you drill are large enough for the anchors you use.

5. Push a screw (not supplied) through each Holder-Screw, and then screw each screw firmly into a support screw hole.

6. Install the 2 Bracket-Wall Mounts in the correct orientation on the bottom of the Soundbar using 2 Screws.

When assembling, make sure the hanger part of the Bracket-Wall Mounts are located behind the rear of the Soundbar.

Rear of Soundbar

Right end of Soundbar

ENG - 30

7. Install the Soundbar with the attached Bracket-Wall Mounts by hanging the Bracket-Wall Mounts on the Holder-Screws on the wall.

8. Slide the Soundbar down as shown below so that the Bracket-Wall Mounts rest securely on the Holder-Screws.

Insert the Holder-Screws into the wide (bottom) part of the Bracket-Wall Mounts, and then slide the Bracket-Wall Mounts down so that the Bracket-Wall Mounts rest securely on the Holder-Screws.

10 SOFTWARE UPDATE

Samsung may offer updates for the Soundbars systemfirmwareinthefuture.

USB port DC 24V

HDMI

USB (5V 0.5A)

DIGITAL AUDIO IN (OPTICAL)

HDMI TO TV (ARC)

HDMI IN

USB (5V 0.5A)

DIGITAL AUDIO IN (OPTICAL)

If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar. For more information about how to download update files, go to the Samsung Electronics website at https://www.samsung.com/us/support/ downloads/. Then, select the product type or enter the model number of your Soundbar, select the Software & Apps option, and then Downloads. Note that the option names can vary.

How to check the Firmware version

1. Turn off the Soundbar. 2. Press and hold the (Sound Control)

button for about 5 seconds on the remote control.

3. Each version appears in the following order on the Soundbar display. (Software version HDMI Tx Rx )

Tx : Wireless Tx module in the Soundbar. Rx : Wireless Rx module in the Subwoofer. R2 VERSION DISPLAY

No connect rear R2--- Connected rear R2xxx

ENG - 31

Update Procedure Important: The update function erases all user settings. We recommend you write down your settings so that you can easily reset them after the update. Note that updating the firmware resets the subwoofer connection too.

1. Connect a USB thumb drive to the USB port on your computer. Important: Make sure there are no music files on the USB thumb drive. This may cause the firmware update to fail.

2. Go to https://www.samsung.com/us/ support/downloads/ on your computer select Enter Model Number and enter the model of your Soundbar. Select manuals and downloads and download the latest software file.

3. Save the downloaded software to a USB stick and select Extract Here to unzip the folder.

4. Turn off the Soundbar and connect the USB stick containing the software update to the USB port.

5. Turn on the Soundbar and change the source to USB mode. Within 3 minutes, UPDATE is displayed and the update begins. When the update is complete, the Soundbar turns off and then turns on automatically.

6. Press the (Volume) button on the top panel for 5 seconds. INIT appears on the display and then the Soundbar turns off. The update is complete.

This product has a DUAL BOOT function. If the firmware fails to update, you can update the firmware again.

7. Restore your settings on the Soundbar.

If UPDATE is not displayed 1. Turn off the Soundbar, disconnect and then

reconnect the USB storage device that contains the update files to the Soundbars USB port.

2. Disconnect the Soundbars power cord, reconnect it, and then turn on the Soundbar.

NOTES The firmware update may not work properly

if audio files supported by the Soundbar are stored in the USB storage device.

Do not disconnect the power or remove the USB device while updates are being applied. The main unit will turn off automatically after completing the firmware update.

After the update is completed, the user setup in the Soundbar is initialized so you can reset your settings. We recommend you write down your settings so that you can easily reset them after the update. Note that updating firmware resets the subwoofer connection too. If the connection to the subwoofer is not re-established automatically after the update, refer to page 6. If the software update fails, check if the USB stick is defective.

Mac OS users should use MS-DOS (FAT) as the USB format.

Updating via USB may not be available, depending on the USB storage device manufacturer.

ENG - 32

11 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).

Soundbar does not turn on.

; Check whether the power cord of the Soundbar is correctly inserted into the outlet.

Soundbar works erratically.

; After removing the power cord, insert it again.

; Remote the power cord from the external device and try again.

; If there is no signal, the Soundbar automatically turns off after a certain period of time. Turn on the power. (See page 3.)

In case the remote control does not work.

; Point the remote directly at the Soundbar. ; Replace the batteries with new ones.

Soundbar does not output any sound.

; The volume of the Soundbar is too low or muted. Adjust the volume.

; When any external device (STB, Bluetooth device, mobile device, etc.) is connected, adjust the volume of the external device.

; For sound output of the TV, select Soundbar. (Samsung TV: Home ( ) Settings ( ) Sound Sound Output Select Soundbar)

; The cable connection to the Soundbar may not be loose. Remove the cable and connect again.

; Remove the power cord completely, reconnect, and turn the power on.

; Reset the product and try again. (See page 31.)

Subwoofer does not output any sound.

; Check whether the LED indicator on the rear of the Subwoofer is on in blue. Reconnect the Soundbar and Subwoofer if the indicator is blinking in blue or turned red. (See page 7.)

; You may experience an issue if there is an obstacle between the Soundbar and Subwoofer. Move devices to an area away from obstacles.

; Other devices sending radio frequency signals in proximity may interrupt the connection. Keep your speaker away from such devices.

; Remove and reconnect the power plug.

The Subwoofer volume is too low.

; The original volume of the content you are playing may be low. Try adjusting the Subwoofer level. (See page 25.)

; Bring the Subwoofer speaker closer to you.

In case the TV is not connected via HDMI TO TV (ARC).

; Check whether the HDMI cable is correctly connected to the ARC terminal. (See page  12.)

; Connection may not be possible due to the connected external device (set-top box, game machine, etc.). Directly connect the Soundbar.

; HDMI-CEC may not be activated on the TV. Turn on the CEC on the TV menu. (Samsung TV: Home ( ) Settings ( ) General External Device Manager Anynet+ (HDMI-CEC) ON)

ENG - 33

There is no sound in when connecting to the TV in HDMI TO TV (ARC) mode.

; Your device is unable to play the input signal. Change the TVs audio output to PCM or Dolby Digital. (For a Samsung TV: Home ( ) Settings ( ) Sound Expert Settings Digital Output Audio Format)

Soundbar does not connect via Bluetooth.

; When connecting a new device, switch to BT PAIRING for connection. (Press the

 PAIR button on the remote control or press the (Source) button on the body for at least 5 seconds.)

; If the Soundbar is connected to another device, disconnect that device first to switch the device.

; Reconnect it after removing the Bluetooth speaker list on the device to connect. (Samsung TV: Home ( ) Settings ( ) Sound Sound Output Bluetooth Speaker List)

; The automatic TV connection may be disabled. While the Soundbar is in BT READY, press and hold the Left button on the Soundbar remote control for 5 seconds to select ON-TV CONNECT. If you see OFF-TV CONNECT, press and hold Left button again for 5 seconds to switch the selection.

; Remove and reconnect the power plug, then try again.

; Reset the product and try again. (See page 31.)

Sound drops out when connected via Bluetooth.

; If your device that is connected via Bluetooth moves too far away from the Soundbar, it may cause the sound to drop out. Move the device closer to the Soundbar.

; If a part of your body is in contact with the Bluetooth transceiver or the product is installed on metal furniture, sound may drop out. Check the installation environment and conditions for use.

Bluetooth multi connection does not work.

; When the TV is connected to the soundbar, Bluetooth multi connection may not operate. Disconnect the Soundbar from the TV and try again.

; Check whether the Bluetooth Multi connection setting is turned on. (Refer to the Soundbar does not connect via Bluetooth. section.)

; Disconnect the device currently playing, pair with the device that you want to connect, and reconnect the previous device.

; If the sound is inaudible even after connecting properly, refer to the Sound drops out when connected via Bluetooth. section.

Soundbar does not turn on automatically with the TV.

; When you turn off the Soundbar while watching TV, power synchronization with the TV is disabled. First turn off the TV.

ENG - 34

12 LICENSE

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

For DTS patents, see http://patents.dts. com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.0 Channel are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. DTS, Inc. All Rights Reserved.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Samsung Electronics Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

[ENERGY STAR] ENERGYSTARqualifiedmodelonly

Your Samsung product is ENERGY STAR qualified in its factory default setting. Change to certain features, settings and functionality in this product can change the power consumption, possibly beyond the limits required for ENERGY STAR qualification.

Environmental Protection Agency and Department of Energy. ENERGY STAR is a joint program of the Government agencies, designed to promote energy efficient products and practices.

Refer to www.energystar.gov for more information of the ENERGY STAR Program.

ENERGYSTARqualifiedmodelonly (Applicable to Thin Client models only) As an ENERGY STAR Partner, SAMSUNG has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

The ENERGY STAR Program has been to reduced greenhouse gas emissions and save energy through voluntary labeling.

Power management setting of this product have been enabled by default, and have various timing setting from 1 minutes to 5 hours.

The product can wake with a button press on the chassis from sleep mode.

ENERGYSTARqualifiedmodelonly(Theother models)

As an ENERGY STAR Partner, Samsung has determined that this product or product models meets the ENERGY STAR guideline for energy efficiency.

ENG - 35

13 OPEN SOURCE LICENSE NOTICE

To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com)

14 IMPORTANT NOTES ABOUT SERVICE

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

An administration fee may be charged if either: a. An engineer is called out to your home at your request and there is no defect in the product. b. You bring the unit to a repair center and there is no defect in the product.

You will be advised of the amount of the administration fee before any work is done or a home visit is made.

If you have a problem with this product, we strongly recommend you read the appropriate section of this manual, visit the Support page for your product at www.samsung.com, or call Samsung Product Support (1-800-726-7864) to find an answer before you contact a service center for a repair

.

ENG - 36

15 SPECIFICATIONS AND GUIDE

Specifications

Model Name HW-A50M

USB 5V/0.5A

Weight 4.6 lbs (2.1 kg)

Dimensions (W x H x D) 33.9 x 2.2 x 3.3 inches

860.0 x 55.0 x 85.0 mm

Operating Temperature Range +41F to +95F (+5C to +35C)

Operating Humidity Range 10 % ~ 75 %

AMPLIFIER Rated Output power 160W(40Wx4)

Supported play formats (DTS 2.0 sound is played in DTS format.)

LPCM 2ch, Dolby Audio (supporting Dolby Digital), DTS

Subwoofer Name PS-WT55D

Weight 10.6 lbs (4.8 kg)

Dimensions (W x H x D) 7.9 x 13.9 x 11.4 inches

(200.6 x 353.0 x 290.0 mm)

AMPLIFIER Rated Output power 130W

NOTES Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate.

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:

One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use)

This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGs authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG customer care center. The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to: http://www.samsung.com/us/peaceofmind/authorized_resellers.html.

2021 Samsung Electronics Co., Ltd. All rights reserved.

QUESTIONS OR COMMENTS?

Country

IN TH

Manualsnet FAQs

If you want to find out how the HW-A50M Samsung works, you can view and download the Samsung HW-A50M Soundbar User Manual on the Manualsnet website.

Yes, we have the User Manual for Samsung HW-A50M as well as other Samsung manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Samsung HW-A50M. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Samsung HW-A50M Soundbar User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Samsung HW-A50M Soundbar User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Samsung HW-A50M Soundbar User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Samsung HW-A50M Soundbar User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Samsung HW-A50M Soundbar User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.