Samsung HW-A40R Soundbar User Manual PDF
Summary of Content for Samsung HW-A40R Soundbar User Manual PDF
HW-A40R
FULL MANUAL
Imagine the possibilities Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at www.samsung.com/register
ENG - 2
SAFETY INFORMATION The following also applies to the Wireless
Surround Speaker SET (SWA-8500).
SAFETY WARNINGS TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Refer to the table below for an explanation of symbols which may be on your Samsung product.
CAUTION RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol indicates that this product has included important literature concerning operation and maintenance.
Class II product : This symbol indicates that it does not require a safety connection to electrical earth (ground). If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user manual for further safety related information.
WARNING To reduce the risk of fire or electric shock, do
not expose this appliance to rain or moisture. To prevent injury, this apparatus must be
securely attached to the floor/wall in accordance with the installation instructions.
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
CAUTION Do not expose this apparatus to dripping or
splashing. Do not put objects filled with liquids, such as vases, on the apparatus.
To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the power plug must be easily and readily accessible at all times.
FCC NOTE (for U.S.A):
FCC Suppliers Declaration of Conformity
Responsible Party - U.S. Contact Information: Samsung Electronics America, Inc. 85 Challenger Road. Ridgefield Park, NJ 07660 Phone: 1-800-SAMSUNG (726-7864)
FCC Compliance Statement : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ENG - 3
FCC Caution : Any changes or modifications not expressly
approved by the party responsible for compliance could void the users authority to operate this equipment.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.
Class B FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorienting or relocating the receiving antenna.
Increasing the separation between the equipment and receiver.
Connecting the equipment to an outlet that is on a different circuit than the radio or TV.
Consulting the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
CALIFORNIA USA ONLY (Applicable for networking models only.) This Perchlorate warning applies only to primary CR(Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/ perchlorate. Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website:www.samsung.com/ recycling Or call, 1800SAMSUNG
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Important Safety Instructions Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.
1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
Install in accordance with the manufacturers instructions.
ENG - 4
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
PRECAUTIONS 1. Ensure that the AC power supply in your
house complies with the power requirements listed on the identification sticker located on the bottom of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the unit if you intend to leave it unused for a long period of time.
2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the unit.
3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the unit to malfunction.
4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using.
5. The battery used with this product contains chemicals that are harmful to the environment. Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat, direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. CAUTION : Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type.
ENG - 5
ABOUT THIS MANUAL The user manual has two parts: simple paper USER MANUAL and a detailed FULL MANUAL you can download.
USER MANUAL See this manual for safety instructions, product installation, components, connections, and product specifications.
FULL MANUAL You can access the FULL MANUAL on Samsungs on-line customer support center by scanning the QR code on the left. To see the manual on your PC or mobile device, download the manual in document format from Samsungs website. (http://www.samsung.com/support)
Design and specifications are subject to change without prior notice.
ENG - 6
CONTENTS
01 Checking the Components 8
Inserting battery (AAA) into the Remote Control ------------------------- 9
02 Product Overview 10
Front / Right Side Panel of the Soundbar ------------------------- 10
Bottom Panel of the Soundbar ------------------------- 11
03 Connecting the Soundbar 12
1. Connecting the Wireless Surround speaker ------------------------- 12
2. Connecting Electrical Power ------------------------- 13
04 Connecting to your TV 16
Method 1. Connecting with a Cable ------------------------- 16 Connecting using an Optical Cable ------------------------- 16
Method 2. Connecting Wirelessly ------------------------- 17 Connecting a TV via Bluetooth ------------------------- 17
05 Connecting an External Device 20
Connecting using an Optical Cable ------------------------- 20
Connecting using an Analog Audio (AUX) Cable ------------------------- 21
06 Connecting a USB Storage Device 22
07 Connecting a Mobile Device 25
Connecting via Bluetooth ------------------------- 25
Connecting via NFC function ------------------------- 28
ENG - 7
08 Using the Remote Control 30
How to Use the Remote Control ------------------------- 30
Adjusting the Soundbar volume with a TV remote control ------------------------- 33
Using the Hidden Buttons (Buttons with more than one function) ------------------------- 34
Output specifications for the different sound effect modes ------------------------- 36
09 Installing the Wall Mount (Optional) 37
Installation Precautions ------------------------- 37
Wall mount Components ------------------------- 37
10 Placing the Soundbar on a TV stand 40
11 Software Update 40
Update Procedure ------------------------- 41
When update fails ------------------------- 41
System Reset ------------------------- 42
12 Troubleshooting 43
13 License 44
14 Open Source License Notice 44
15 Important Notes About Service 44
16 SpecificationsandGuide 45
Specifications ------------------------- 45
ENG - 8
01 CHECKING THE COMPONENTS
Soundbar Main Unit Power Cord (AH81-11700A)
Remote Control (AH81-11699A) / Battery (AAA x 1) Optical Cable (AH81-11681A)
Wireless Surround Speaker SET (SWA-8500)
STANDBY
LINK
x 2
Surround Speaker (AH81-11261A (LEFT) / AH81-11262A (RIGHT))
Power Cord (AH81-09782A)
x 2
Wireless Receiver Module Speaker Cable (AH81-11260A)
The two types of power cord (Soundbar / Wireless receiver module) cannot be used in common. User Manual / Warranty Card / Regulatory Guide (Not available in some locations). For more information about the power supply and power consumption, refer to the label attached
to the product. (Label : Bottom of the Soundbar Main Unit, Rear of the Wireless Surround Speaker) To purchase additional components or optional cables, contact a Samsung Service Center or
Samsung Customer Care. The appearance of the accessories may differ slightly from the illustrations above.
ENG - 9
Inserting battery (AAA) into the Remote Control Match the polarity of the battery to the symbols on the battery compartment.
1 1
3
2
2
ENG - 10
02 PRODUCT OVERVIEW
Front / Right Side Panel of the Soundbar
AUX IN
POWER DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
AUX IN
POWER DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
Position the product so that the SAMSUNG logo is located on the top.
Right Side of the Soundbar
LED indicator
The LED Indicator flashes, glows, or changes color depending on the Soundbar's current mode or status. The color of the LED indicator and the number of lights indicate the active mode as described below.
W White LED
B Blue LED
R Red LED
G Green LED
The Multicolor LED changes to White, Blue, Red, and Green, depending on the mode or status.
POWER Turns the power on and off.
Source
Press the (Source) button to change the mode. Each time you change the mode, the LED indicator change. D.IN Bluetooth AUX USB
Source LED indicator Source LED indicator
D.IN W Bluetooth
B
Connected status
Disconnected status
B
Slow-Blinking
Pairing status
B
Fast-Blinking
AUX W W USB W W W
ENG - 11
Volume Adjusts the volume.
NFC You can activate your Bluetooth connection by placing your phone in the NFC detection area of the Soundbar.
When you plug in the power cord, the power button will begin working in 4 to 6 seconds. When you turn on this unit, there will be a 4 to 5 second delay before it produces sound. If you hear sounds from both the TV and Soundbar, go to the Settings menu for the TV audio and
change the TV speaker to External Speaker.
Bottom Panel of the Soundbar
Bottom of the Soundbar
AUX IN
POWER DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
POWER
AUX IN
DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
POWER
AUX IN
DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
POWER Connect the Soundbar's AC power cord.
AUX Connect to the Analog output of an external device.
D.IN Connect to the digital (optical) output of an external device.
USB Connect a USB device here to play music files on the USB device through the Soundbar.
When disconnecting the power cord from a wall outlet, pull the plug. Do not pull the cable. Do not connect this unit or other components to an AC outlet until all connections between
components are complete.
ENG - 12
03 CONNECTING THE SOUNDBAR
1. Connecting the Wireless Surround speaker Use the speaker cables to connect the two surround sound speakers to the Wireless Receiver Module.
When connecting the speaker cable, connect the core wire to the speaker.
SURROUND-RIGHT SURROUND-RIGHT
The speaker cables are color coded.
SURROUND-LEFT
ID SET
L R
SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3
POWER
ID SET
L R
SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3
SURROUND-RIGHT
SURROUND-LEFT SURROUND-RIGHT
When connecting the speaker cables to the Wireless Receiver Module, follow these steps: 1. Insert the grey plug into the grey port on the Wireless Receiver. 2. Insert the blue plug into the blue port on the Wireless Receiver.
When connecting the speaker cables to the surround speakers, follow these steps: 1. Match the speaker cable connected to the grey port to the speaker with the grey label. 2. Match the speaker cable connected to the blue port to the speaker with the blue label. 3. Insert the red and black colored ends of each speaker cable into the red and black ports of the
appropriate speaker. The labels are on the backs of the speakers.
ENG - 13
2. Connecting Electrical Power Use the power components to connect the Soundbar and Wireless Surround Speaker to an electrical outlet. See the illustrations below.
For information about the required electrical power and power consumption, refer to the label attached to the product. (Label : Bottom of the Soundbar Main Unit, Rear of the Wireless Surround Speaker)
AUX IN
POWER DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
POWER
AUX IN
DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
Power Cord
Bottom of the Soundbar Main Unit Connecting
Electrical Power Rear of the Wireless Receiver
Module
Connecting Electrical Power ID SET
L R
SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3
POWER
POWER
ID SET
L R
SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3
POWER
POWER
ID SET
L R
SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3
POWER
POWER
Connecting the Soundbar to the Wireless Surround speaker When the Wireless Surround speaker is connected, you can enjoy rich bass sound.
Automatic connection between the Wireless Surround speaker and the Soundbar When you turn the power on after connecting the power cables to the Soundbar and Wireless Surround speaker, the surround speakers are automatically connected to the Soundbar.
When auto pairing is complete, the blue indicators at the rear of the Wireless Receiver Module turn on.
ENG - 14
Manually connecting the Wireless Surround speaker if automatic connection fails
Before performing the manual connection procedure below:
Check whether the power cables for the Soundbar and Wireless Surround speaker are connected properly.
Make sure that the Soundbar is turned on.
1. Press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks fast (in Blue).
ID SET
L R
SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3
POWER
POWER
ID SET
SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3
STANDBY
LINK
STANDBY
LINK
Blue blinking
5 Sec
2. Press and hold the button on the remote control for at least 5 seconds.
B G
Blue and Green alternately blink X 35 Sec
3. Check if the LINK LED is solid blue (connection complete)
STANDBY
LINK
STANDBY
LINK
Blue is On
The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Receiver Module.
ENG - 15
LED Indicator Lights on the Rear of Wireless Surround speaker
LED status Action
LINK (Blue)
On Connected with the Soundbar
-
Blinking fast Pairing mode Check if the Soundbar is turned on
Repeat steps 2 through 3.
Blinking slowly Disconnected ID SET to change mode to Pairing mode.
STANDBY (Red)
On Connection failure
Check if the Soundbar is turned on
1. Press the ID SET button on the back of the Wireless Receiver Module with a pen tip for 5~6 seconds until the LINK LED indicator blinks (in Blue).
ID SET
L R
SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3
POWER
POWER
ID SET
SURROUND SPEAKERS OUT SPEAKER IMPEDANCE : 3
5 Sec
2. Repeat steps 2 through 3.
Others - Errors Contact a Samsung Service Center.
NOTES Do not connect the power cord of this product or your TV to a wall outlet until all connections
between components are complete. Before moving or installing this product, be sure to turn off the power and disconnect the power cord. If the main unit is powered off, the Wireless Surround speaker will go into stand-by mode and the
STANDBY LED on the rear of the Wireless Receiver Module will turn red after blinking blue several times.
If you use a device that uses the same frequency (5.8GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption.
The maximum transmission distance of the main units wireless signal is about 32.8 ft (10 m), but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the Wireless Surround speaker, the system may not operate at all because the wireless signal cannot penetrate metal.
PRECAUTIONS Wireless receiving antennas are built into the Wireless Surround speaker. Keep the unit away from
water and moisture. For optimal listening performance, make sure that the area around the Wireless Surround speaker
and the Wireless Receiver Module is clear of any obstructions.
ENG - 16
04 CONNECTING TO YOUR TV Hear TV sound from your Soundbar through wired or wireless connections.
When the Soundbar is connected to selected Samsung TVs, you can control the Soundbar using the TVs remote control.
This feature is supported by 2017 and later Samsung Smart TVs that support Bluetooth when you connect the Soundbar to the TV using an optical cable.
This function also allows you to use the TV menu to adjust the sound field and various settings as well as the volume and mute.
Method 1. Connecting with a Cable When the audio in a broadcast is encoded in Dolby Digital and the Digital Output Audio Format on your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the setting on the TV is changed, you will experience better sound quality. (The TV menu may use different words for Dolby Digital and PCM depending on the TV manufacturer.)
Connecting using an Optical Cable
Pre-connection Checklist When you use an optical cable and the terminals have covers, be sure to remove the covers.
OPTICAL OUT
AUX IN
DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
Optical Cable
Bottom of the Soundbar
Connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar to the OPTICAL OUT port of the TV with a digital optical cable.
ENG - 17
Right Side of the Soundbar
(OR) W
Press the (Source) button on the right side panel and then select the D.IN mode. (OR) Press the button on the remote control.
Method 2. Connecting Wirelessly
Connecting a TV via Bluetooth When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
Only one TV can be connected at a time.
Right Side of the Soundbar
(OR) B
Fast-Blinking
1. Press the button on the remote control to enter the Bluetooth Pairing mode (Blue indicator is fast-blinking).
(OR) a. Press the (Source) button on the right side panel to change to Bluetooth mode. When it is Bluetooth Ready mode (blue indicator is slow-blinking) if there is a connection record with TV, Soundbar will auto connect to the recorded TV which is using Bluetooth function.
b. When it is Bluetooth Ready mode (blue indicator is slow-blinking) without a connection record with your TV, press and hold the (Source) button on the right side panel of the Soundbar for more than 5 seconds to change to Bluetooth Pairing mode (blue indicator is fast-blinking). Then go to step 2.
2. Select Bluetooth mode on the TV. (For more information, see the TVs manual.)
ENG - 18
3. Select [AV] Samsung Soundbar A400-Series from the list on TVs screen. An available Soundbar is indicated with Need Pairing or Paired on the TVs Bluetooth device list. To connect the TV to the Soundbar, select the message, and then establish a connection.
When the TV is connected ,the blue LED should always go on. 4. You can now hear TV sound from the Soundbar.
If the device fails to connect If a previously connected Soundbar listing (e.g. [AV] Samsung Soundbar A400-Series) appears in
the list, delete it. Then repeat steps 1 through 3.
NOTE After you have connected the Soundbar to your TV the first time, use the Bluetooth Ready mode
to reconnect.
Disconnecting the Soundbar from the TV Press the (Source) button at the right side of the Soundbar or the , or button on the remote control, and then change to any mode except Bluetooth.
Disconnecting takes time because the TV must receive a response from the Soundbar. (The time required may differ, depending on the TV model.)
To cancel the automatic Bluetooth connection between the Soundbar and TV, press and hold button for 5 seconds in Bluetooth Ready mode. TV Connect is turned OFF.
To turn TV Connect back on, press and hold the button for 5 seconds with the Soundbar in Bluetooth Ready mode.
TV Connect is set to ON by default.
Mode Remote control Button LED indicator
TV Connect-OFF 5 Sec B W W R
Blinking
TV Connect-ON 5 Sec B W W G
Blinking
ENG - 19
NOTE If asked for a PIN code when connecting a Bluetooth device, enter <0000>. In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 32.8 ft (10 m). The Soundbar automatically turns off after 18 minutes in the Ready state. The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances: If there is a strong electrical field around the Soundbar. If several Bluetooth devices are simultaneously paired with the Soundbar. If the Bluetooth device is turned off, not in place, or malfunctions.
Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
ENG - 20
05 CONNECTING AN EXTERNAL DEVICE Connect to an external device via an optical cable or analog cable to play the external devices sound through the Soundbar.
Connecting using an Optical Cable
OPTICAL OUT
AUX IN
DIGITAL AUDIO IN (OPTICAL)
Bottom of the Soundbar
Optical Cable
BD / DVD player / Set-top box / Game console
Connect the DIGITAL AUDIO IN (OPTICAL) on the main unit to the OPTICAL OUT port of the Source Device using a digital optical cable.
Right Side of the Soundbar
(OR) W
Press the (Source) button on the right side panel and then select the D.IN mode. (OR) Press the button on the remote control.
ENG - 21
Connecting using an Analog Audio (AUX) Cable
AUX IN
DIGITAL AUDIO IN (OPTICAL)
- AUDIO -R L
AUX IN
DIGITAL AUDIO IN (OPTICAL)
Bottom of the Soundbar Audio (AUX) Cable
(not supplied)
BD / DVD player / Set-top box / Game console
Connect the AUX IN port on the Soundbar to the AUDIO OUT port of the Source Device using a digital audio cable.
Right Side of the Soundbar
(OR) W W
Press the (Source) button on the right side panel and then select the AUX mode. (OR) Press the button on the remote control.
ENG - 22
06 CONNECTING A USB STORAGE DEVICE
You can play music files located on USB storage devices through the Soundbar.
DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
Bottom of the Soundbar
Connect the USB device to the USB port on the bottom of the product.
Right Side of the Soundbar
(OR) W W W
Press the (Source) button on the right side panel and then select the USB mode. (OR) Press the button on the remote control.
NOTE The Soundbar automatically turns off (Auto Power Off) if you do not connect a USB device to the
Soundbar within 18 minutes.
ENG - 23
Setting Repeat Play Options
Repeat play When the Soundbar is in USB mode, each time you press the button the USB mode changes how it plays tracks in the following order: Repeat - Off > Repeat - 1 song > Repeat - All songs. See the table below for details.
Mode Remote control Button LED indicator
Repeat - Off W W W
Repeat - 1 song W W W
Blinking
Repeat - All songs W W W
Blinking
Repeat play at Random When the Soundbar is in USB mode, once you press the button, the USB mode changes how it plays tracks to Repeat - Random. See the table below for details.
Mode Remote control Button LED indicator
Repeat - Random W W W
Blinking
ENG - 24
File Format Type Compatibility list
Extension Codec Sampling Rate Bitrate
*.mp3 MPEG 1 Layer2 32kHz ~ 48kHz 32kbps~320kbps
MPEG 1 Layer3 32kHz ~ 48kHz 32kbps~320kbps
MPEG 2 Layer3 16kHz ~ 24kHz 8kbps~160kbps
MPEG 2.5 Layer3 8kHz ~ 12kHz 8kbps~160kbps
*.wma WMA7/8/9/STD 8kHz ~ 48kHz 32kbps~320kbps
*.aac AAC
8kHz ~ 96kHz < 1728kbpsAAC-LC
HE-AAC
*.flac - 8kHz ~ 192kHz < 5Mbps
*.wav PCM/LPCM/IMA_ ADPCM/MPEG/MULAW
8kHz ~ 192kHz < 5Mbps
If there are too many folders (about 256) and files (about 999) stored on the USB device, it may take the Soundbar some time to access and play files.
Only USB Format Type FAT 32 is supported for USB storage device connection.
ENG - 25
07 CONNECTING A MOBILE DEVICE
Connecting via Bluetooth When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
You cannot connect more than one Bluetooth device at a time.
Right Side of the Soundbar
(OR) B
Fast-Blinking
Bluetooth device
1. Press the button on the remote control to enter the Bluetooth Pairing mode (Blue indicator is fast-blinking).
(OR) a. Press the (Source) button on the right side panel to change to Bluetooth mode. When it is Bluetooth Ready mode (blue indicator is slow-blinking) if there is a connect record with Bluetooth device, Soundbar will auto connect to the record Bluetooth device which is using Bluetooth function.
b. When it is Bluetooth Ready mode (blue indicator is slow-blinking) without a connection record with your Bluetooth device, press and hold the (Source) button on the right side panel of the Soundbar for more than 5 seconds to change to Bluetooth Pairing mode (blue indicator is fast-blinking). Then go to step 2.
2. On your device, select [AV] Samsung Soundbar A400-Series from the list that appears. When the Soundbar is connected to the Bluetooth device, the blue LED should always be on.
3. Play music files from the device connected via Bluetooth through the Soundbar.
If the device fails to connect If a previously connected Soundbar listing (e.g. [AV] Samsung Soundbar A400-Series) appears in
the list, delete it. Then repeat steps 1 and 2.
NOTE After you have connected the Soundbar to your TV the first time, use the Bluetooth Ready mode
to reconnect.
ENG - 26
NOTES If asked for a PIN code when connecting a Bluetooth device, enter <0000>. In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 32.8 ft (10 m). The Soundbar automatically turns off after 18 minutes in the Ready state. The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances: If there is a strong electrical field around the Soundbar. If several Bluetooth devices are simultaneously paired with the Soundbar. If the Bluetooth device is turned off, not in place, or malfunctions.
Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
The Soundbar supports SBC data (44.1kHz, 48kHz). Connect only to a Bluetooth device that supports the A2DP (AV) function. You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free)
function. Once you have paired the Soundbar to a Bluetooth device, selecting [AV] Samsung Soundbar
A400-Series from the devices scanned devices list will automatically change the Soundbar to Bluetooth mode.
Available only if the Soundbar is listed among the Bluetooth devices paired devices. (The Bluetooth device and the Soundbar must have been previously paired at least once.)
The Soundbar will appear in the Bluetooth devices searched devices list only when the Soundbar is displaying Bluetooth Ready.
The Soundbar cannot be paired to another Bluetooth device if already in Bluetooth mode and paired to a Bluetooth device.
Bluetooth Power On/Off If a previously paired Bluetooth device tries to pair with the Soundbar when the Bluetooth Power function is on and the Soundbar is turned off, the Soundbar turns on automatically. Press and hold the button for more than 5 seconds on the remote while the Soundbar is turned on. For more information about Bluetooth Power On/Off, see page 35.
Bluetooth Power function is set to On by default.
ENG - 27
Disconnecting the Bluetooth device from a Soundbar You can disconnect a Bluetooth device from the Soundbar. For instructions, see the Bluetooth devices user manual.
The Soundbar will be disconnected. When the Soundbar is disconnected from the Bluetooth device, blue LED is slow-blinking
Disconnecting the Soundbar from the Bluetooth device Press the (Source) button at the right side of the Soundbar or the , or button on the remote control, and then change to any mode except Bluetooth.
Disconnecting takes time because the Bluetooth device must receive a response from the Soundbar. (Disconnection time may differ, depending on the Bluetooth device)
When the Soundbar is disconnected from the Bluetooth device, blue LED is slow-blinking
More About Bluetooth Bluetooth is a technology that enables Bluetooth-compliant devices to interconnect easily with each other using a short wireless connection.
A Bluetooth device may cause noise or malfunction, depending on usage, if: A part of your body is in contact with the receiving/transmitting system of the Bluetooth device
or the Soundbar. It is subject to electrical variation from obstructions caused by a wall, corner, or office partition. It is exposed to electrical interference from same frequency-band devices including medical
equipment, microwave ovens, and wireless LANs. Pair the Soundbar with the Bluetooth device while they are close together. The further the distance between the Soundbar and Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost. In poor reception areas, the Bluetooth connection may not work properly. The Bluetooth connection only works when it is close to the unit. The connection will be
automatically cut off if the Bluetooth device is out of range. Even within range, the sound quality may be degraded by obstacles such as walls or doors.
This wireless device may cause electric interference during its operation.
ENG - 28
Connecting via NFC function
Bluetooth device
NFC Top of the Soundbar
Place your mobile device in the NFC detection area on top of the Soundbar.
B
Check whether the Bluetooth connection is established.
NOTES Make sure that your mobile device has the NFC function turned on and that the screen is active. Bluetooth connection is unavailable when NFC of the mobile device is in card emulation mode. If asked for a PIN code when connecting a Bluetooth device, enter <0000>. In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the
Soundbar and the Bluetooth device exceeds 32.8 ft (10 m). The Soundbar automatically turns off after 18 minutes in the Ready state. The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances: If there is a strong electrical field around the Soundbar. If several Bluetooth devices are simultaneously paired with the Soundbar. If the Bluetooth device is turned off, not in place, or malfunctions.
Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
The Soundbar supports SBC data (44.1kHz, 48kHz). Connect only to a Bluetooth device that supports the A2DP (AV) function.
ENG - 29
You cannot connect the Soundbar to a Bluetooth device that supports only the HF (Hands Free) function.
Once you have paired the Soundbar to a Bluetooth device, selecting [AV] Samsung Soundbar A400-Series from the devices scanned devices list will automatically change the Soundbar to Bluetooth mode.
Available only if the Soundbar is listed among the Bluetooth devices paired devices. (The Bluetooth device and the Soundbar must have been previously paired at least once.)
The Soundbar cannot be paired to another Bluetooth device if already in Bluetooth mode and paired to a Bluetooth device.
ENG - 30
08 USING THE REMOTE CONTROL
How to Use the Remote Control
Power Turns the Soundbar on and off.
LED Indicator
W W W W G
Blink once one by one
On
W W W W R
Blink once one by one
Off
Auto Power Down Function The unit turns off automatically in the following situations:
In AUX or D.IN mode if there is no audio signal for 18 minutes.
SURROUND, STANDARD Press to select the desired sound effect by choosing SURROUND or STANDARD.
LED Indicator
SURROUND STANDARD
W W
White LEDs move to right X1
W W
White LEDs move to left X1
VOL (Volume) Push the button up or down to adjust the volume.
LED Indicator
W
D.IN Press to enter the D.IN mode.
LED Indicator
W
ENG - 31
[ / p / ]
Press the button to select the previous music file.
Press the button to play/pause a music file.
Press the button to select the next music file.
USB RANDOM The playback mode of the USB storage device changes to random repeat.
Mute Press the button to mute the sound. Press it again to unmute the sound.
LED Indicator W
BASS ,.
Press the BASS ,or BASS .button to adjust the level of the woofer (bass) to between -6 to +6.
LED Indicator W
(Bluetooth) Press to enter the Bluetoothmode.
LED Indicator
B Connected status
B
Slow-Blinking
Disconnected status
B
Fast-Blinking
Pairing status
AUX Press to enter the AUX mode.
LED Indicator W W
ENG - 32
PAIR (Bluetooth PAIR) Press this button to pair a new Bluetooth device.
LED Indicator B
Fast-Blinking
B Pairing status Connection is complete
USB Press to enter the "USB" mode.
LED Indicator
W W W
ENG - 33
Adjusting the Soundbar volume with a TV remote control
If you have a Samsung TV, you can adjust the Soundbars volume using the IR remote control that came with your Samsung TV. First use the TV menu to set the TV audio on your Samsung TV to external speakers, then use your Samsung remote to control the Soundbars volume. For more information, see the TVs user manual.
The default mode for this function is control by a Samsung TV. 1. If your TV is not a Samsung TV and you want your TVs remote to control the Soundbars volume,
you can change the settings of this function by pressing and holding the BASS button repeatedly. To have your TVs remote adjust the Soundbars volume, follow Steps 1 through 3 below.
2. If you want to turn off this function completely, follow Steps 1 and 2.
Mode Remote control Button LED indicator
1. Turn off All LEDs Off
2. Samsung TV mode 5 Sec W W W W
Blinking
3. All TV mode 5 Sec W W W W
Blinking
4. Off mode
(Default mode) 5 Sec W W W W
Blinking
Each time you press the BASS button and hold it for 5 seconds, the mode switches in the following order: Off (Default mode) Samsung TV All TV.
The LEDs blink for 3~4 seconds, then return to the standby power off mode. This function may not be available, depending on your TV s remote control. Manufacturers supporting this function: VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA,
Hisense, RCA
ENG - 34
Using the Hidden Buttons (Buttons with more than one function)
Hidden Button
How to Use the Remote ControlRemote Control Button
Function Pre-condition
Auto Power Down On/Off
AUX mode, Power On
Press and hold the button for 5 seconds at the "AUX" mode.
LED indicator
W W G
Blinking
Auto Power Down On
W W R
Blinking
Auto Power Down Off
The unit turns off automatically in the following situations.
If the Audio (AUX) cable is disconnectied for 18 minutes.
If there is no KEY input for 8 hours when the Audio (AUX) Cable is connected.
Initialize Power On
Press and hold button for 10 seconds. This operation will not clear Bluetooth paired
history.
LED indicator
W W W W R
Blinking X 4
TV remote control On/Off
Power Off For detailed information about TV remote control, please see "Adjusting the Soundbar volume with a TV remote control" on page 33.
TV Connect Bluetooth mode For detailed information about TV Connect, please see "Disconnecting the Soundbar from the TV on page 18.
ENG - 35
ID SET Power On
Press and hold the button for 5 seconds to complete ID SET.
LED indicator
B G
Blue and Green alternately blink X 3
B G B G B G
Bluetooth Power On/Off
Power On
Press and hold button for 5 seconds.
LED indicator
B W G
Blinking
Bluetooth Power On
B W R
Blinking
Bluetooth Power Off
DRC On/Off
Power Off
Press and hold button for 5 seconds.
LED indicator
W G
Blinking X 3
DRC On
W R
Blinking X 3
DRC Off
ENG - 36
TX WIRELESS RESET
Power Off
Press and hold the button for 5 seconds.
LED indicator
B W
Blinking X 3
Outputspecificationsforthedifferentsoundeffectmodes
Effect Input Output
With Wireless Rear Speaker Kit
STANDARD 2.0 ch 2.0ch
5.1 ch 2.0ch
SURROUND SOUND 2.0 ch 4.0ch
5.1 ch 4.0ch
ENG - 37
09 INSTALLING THE WALL MOUNT (OPTIONAL)
Installation Precautions Install on a vertical wall only. Do not install in a place with high temperature or humidity. Verify whether the wall is strong enough to support the products weight. If not, reinforce the wall
or choose another installation point. Purchase and use the fixing screws or anchors appropriate for the kind of wall you have (plaster
board, iron board, wood, etc.). If possible, fix the support screws into wall studs.
Purchase wall mounting screws according to the type and thickness of the wall you want to mount the Soundbar on.
Diameter: M4 Length: 1.6 inches or longer recommended.
Connect cables from the unit to external devices before you install the Soundbar on the wall. Make sure the unit is turned off and unplugged from the power source before you install it.
Otherwise, it may cause an electric shock.
Wall mount Components
2 inches (5 cm) or more
For Installation on Concrete Walls
(not supplied)
A B C D x 2 (M4 x L40)
A B C D x 2
1.6 (40 mm) or longer 0.15 (4 mm)
0.31 (8 mm)
Recommendedspecification
NOTE
Installations on other types of walls will require
different kinds of screws.
ENG - 38
1.
--- 14.6 (370 mm) ---
CENTER LINE
NOTES If your TV is installed on the
wall, install the Soundbar 2 inches (5 cm) or more below your TV.
Use a pencil to mark the holes positions.
2.
0.25 (6 mm)
2 (50 mm)
A B C D
IMPORTANT NOTE The installation method shown here is for CONCRETE walls. Installation methods will vary
depending on the wall type. For installation on dry wall, we strongly recommend you drill screw support holes into the underlying wood studs.
3.
A B C D 0.41 (10.5mm)
ENG - 39
4.
AUX IN
POWER DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
POWER
AUX IN
POWER DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
POWER
5.
NOTE Supports for wall installation are built
into the back of the Soundbar.
CAUTION
Press the Soundbar down with sufficient force to fix it to the wall. If the Soundbar is not firmly fixed to the wall, it could be accidently detached, resulting in personal injury.
Do not bump into or strike the Soundbar (especially from the bottom). The impact could detach the Soundbar from the wall, resulting in personal injury.
ENG - 40
10 PLACING THE SOUNDBAR ON A TV STAND
Place the Soundbar on a TV stand.
1.2 inches (3cm) or more
As illustrated in the image, align the center of the Soundbar with the center of the TV, carefully place the Soundbar onto the TV stand. For optimal sound quality, position the Soundbar at least 1.2 inches (3 cm) away from the TV front.
NOTE Make sure the Soundbar is placed on a flat
and solid surface.
11 SOFTWARE UPDATE
Samsung may offer updates for the Soundbars systemfirmwareinthefuture.
USB (5V 0.5A)
Bottom of the Soundbar
If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar. For more information about how to download update files, go to the Samsung Electronics website at (www.samsung.com Support). Then, select the product type or enter the model number of your Soundbar, select the Software & Apps option, and then Downloads. Note that the option names can vary.
ENG - 41
Update Procedure Important: The update function erases all user settings. We recommend you write down your settings so that you can easily reset them after the update.
1. Connect a USB thumb drive to the USB port on your computer. Important: Make sure there are no music files on the USB thumb drive. This may cause the firmware update to fail.
2. Go to https://www.samsung.com/us/ support/downloads/ on your computer select Enter Model Number and enter the model of your Soundbar. Select manuals and downloads and download the latest software file.
3. Save the downloaded software to a USB stick and select Extract Here to unzip the folder.
4. Turn off the Soundbar and connect the USB stick containing the software update to the USB port.
5. Disconnect the power cord, reconnect it, and then turn on the Soundbar.
6. Turn on the Soundbar and select mode to USB. Within 3 minutes, 4 white LEDs on and update begins.
7. When the update complete, the Soundbar turns restart. Press and hold both and (Volume) button on the right panel for 5 seconds. All LEDs blink 4 times and then the Soundbar turns on. The update is complete.
If the firmware fails to update, you can update the firmware again.
8. Restore your settings on the Soundbar.
When update fails 1. Turn off the Soundbar, disconnect and then
reconnect the USB storage device that contains the update files to the Soundbars USB port.
2. Disconnect the Soundbars power cord, reconnect it, and then turn on the Soundbar.
NOTES The firmware update may not work properly
if audio files supported by the Soundbar are stored in the USB storage device.
Do not disconnect the power or remove the USB device while updates are being applied. The main unit will turn off automatically after completing the firmware update.
After the update is completed, the user setup in the Soundbar is initialized so you can reset your settings. We recommend you write down your settings so that you can easily reset them after the update. If the software update fails, check if the USB stick is defective.
Mac OS users should use MS-DOS (FAT) as the USB format.
Updating via USB may not be available, depending on the USB storage device manufacturer.
ENG - 42
System Reset
W W W W R
AUX IN
POWER DIGITAL AUDIO IN (OPTICAL)
USB (5V 0.5A)
Right Side of the Soundbar
5 Sec
Blinking X 4
With the Soundbar on, press the both and (Volume) buttons on the body at the same time for at least 5 seconds.
CAUTION
All the settings of the Soundbar are reset. Be sure to perform this only when reset is required.
ENG - 43
12 TROUBLESHOOTING Refer to the table below if this product does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the product, disconnect the power cord, and contact Samsung Electronics at 1-800-SAMSUNG (1-800-726-7864).
Soundbar does not turn on.
; Check whether the power cord of the Soundbar is correctly inserted into the outlet.
Soundbar works erratically.
; After removing the power cord, insert it again.
; Remote the power cord from the external device and try again.
; If there is no signal, the Soundbar automatically turns off after a certain period of time. Turn on the power. (See page 30)
In case the remote control does not work.
; Point the remote directly at the Soundbar. ; Replace the batteries with new ones.
Soundbar does not output any sound.
; The volume of the Soundbar is too low or muted. Adjust the volume.
; When any external device (STB, Bluetooth device, mobile device, etc.) is connected, adjust the volume of the external device.
; For sound output of the TV, select Soundbar. (Samsung TV: Home ( ) Settings ( ) Sound Sound Output Select Soundbar)
; The cable connection to the Soundbar may not be loose. Remove the cable and connect again.
; Remove the power cord completely, reconnect, and turn the power on.
; Reset the product and try again. (See page 42)
Soundbar does not connect via Bluetooth.
; Press the PAIR button to pair a new. ; If the Soundbar is connected to another device, disconnect that device first to switch the device.
; Reconnect it after removing the Bluetooth speaker list on the device to connect. (Samsung TV: Home ( ) Settings ( ) Sound Sound Output Bluetooth Speaker List)
; Remove and reconnect the power plug, then try again.
; Reset the product and try again. (See page 42)
Sound drops out when connected via Bluetooth.
; Some devices can cause radio interference if they are located too close to the Soundbar. e. g. microwaves, wireless routers, etc.
; If your device that is connected via Bluetooth moves too far away from the Soundbar, it may cause the sound to drop out. Move the device closer to the Soundbar.
; If a part of your body is in contact with the Bluetooth transceiver or the product is installed on metal furniture, sound may drop out. Check the installation environment and conditions for use.
Soundbar does not turn on automatically with the TV.
; When you turn off the Soundbar while watching TV, power synchronization with the TV is disabled. First turn off the TV.
ENG - 44
13 LICENSE
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS 2.0 Channel are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. DTS, Inc. All Rights Reserved.
The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Samsung Electronics Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.
14 OPEN SOURCE LICENSE NOTICE
To send inquiries and requests for questions regarding open sources, contact Samsung Open Source (http://opensource.samsung.com)
15 IMPORTANT NOTES ABOUT SERVICE
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
An administration fee may be charged if either: a. An engineer is called out to your home at your request and there is no defect in the product. b. You bring the unit to a repair center and there is no defect in the product.
You will be advised of the amount of the administration fee before any work is done or a home visit is made.
If you have a problem with this product, we strongly recommend you read the appropriate section of this manual, visit the Support page for your product at www.samsung.com, or call Samsung Product Support (1-800-726-7864) to find an answer before you contact a service center for a repair.
ENG - 45
16 SPECIFICATIONS AND GUIDE
Specifications
Model Name HW-A40R
USB 5V/0.5A
Weight 4.4 lbs (2.0 kg)
Dimensions (W x H x D) 25.2 x 2.6 x 4.2 inches
(641.0 x 65.0 x 107.0 mm)
Operating Temperature Range +41F to +95F (+5C to +35C)
Operating Humidity Range 10 % ~ 75 %
Supported play formats (DTS 2.0 sound is played in DTS format.)
LPCM 2ch, Dolby Audio (supporting Dolby Digital), DTS
Wireless Surround Speaker SET Name SWA-8500
Weight Wireless Receiver Module Surround Speaker
1.5 lbs (0.7 kg) 1.1 lbs (0.5 kg)
Dimensions (W x H x D) Wireless Receiver Module Surround Speaker
2.0 x 7.9 x 5.2 inches (50.0 x 201.0 x 132.0 mm) 3.0x 5.0 x 3.0 inches (76.0 x 127.0 x 76.0 mm)
Operating Temperature Range +41F to +95F (+5C to +35C)
Operating Humidity Range 10 % ~ 75 %
Frequency range 20Hz~20kHz
NOTES Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. Weight and dimensions are approximate.
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor* (*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNGs authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser. SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties. This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product. THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To obtain warranty service, please contact SAMSUNG customer care center. The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller. THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE SUCH RESTRICTION MAY BE PROHIBITED. For a list of Samsung authorized retailers, please go to: http://www.samsung.com/us/peaceofmind/authorized_resellers.html.
2021 Samsung Electronics
Related manuals for Samsung HW-A40R Soundbar User Manual
Manualsnet FAQs
If you want to find out how the HW-A40R Samsung works, you can view and download the Samsung HW-A40R Soundbar User Manual on the Manualsnet website.
Yes, we have the User Manual for Samsung HW-A40R as well as other Samsung manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User Manual should include all the details that are needed to use a Samsung HW-A40R. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Samsung HW-A40R Soundbar User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Samsung HW-A40R Soundbar User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Samsung HW-A40R Soundbar User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Samsung HW-A40R Soundbar User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Samsung HW-A40R Soundbar User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.