Samsung HW-D600 Receiver User Manual PDF
Summary of Content for Samsung HW-D600 Receiver User Manual PDF
AV Receiver System user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
HW-D600
HW-D650S
HW-D600_D650S_XAA_0616.indd 1 2011-06-16 10:26:55
2 English
Safety Information Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE PARTS ARE INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.
To prevent injury, this apparatus must be securely attached to the oor/wall in accordance with the installation
instructions.
CAUTION
Apparatus shall not be exposed to dripping or splashing and no objects lled with liquids, such as vases, shall be placed
on the apparatus.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
This product satis es FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded
cables and connectors for connections.
FCC NOTE (FOR U.S.A): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution : FCC regulations state that any unauthorized changes or modi cations to this equipment may void the user's
authority to operate it.
License Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent #s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535;
7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending.
DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio | Essential, and the DTS logos are
trademarks of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved.
This symbol indicates dangerous voltage
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important instructions
accompanying the product.
HW-D600_D650S_XAA_0616.indd 2 2011-06-16 10:27:06
English 3
Important Safety Instructions
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE: FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth an uncontrolled environment.
This equipment should be installed and operated with minimum distance 7.9 inches between the radiator and
your body. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Canadian Department of Communications Radio Interference Regulations
This digital apparatus (Wireless Internet Radio) does not exceed the Class B limits for radio-noise emissions
from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of
Communications.
Read these operating instructions carefully before using the unit. Follow all the safety instructions listed
below. Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these Instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including ampli ers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t
into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachment/accessories speci ed by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table speci ed by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to quali ed service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
HW-D600_D650S_XAA_0616.indd 3 2011-06-16 10:27:06
4 English
Precautions
Ensure that the AC power supply in your house complies with speci cations listed on the identi cation sticker
located on the back of your product.
Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation
(7.5~10cm / 20~25 inches).
Do not place the product on ampli ers or other equipment which may become hot.
Make sure the ventilation slots are not covered.
Do not stack anything on top of the product.
To disconnect the product completely from the power supply, remove its plug from the wall outlet.
- If you leave the product unused for a long period of time, disconnect the plug from the wall outlet.
During thunderstorms, disconnect the AC plug from the wall outlet. Voltage spikes caused by lightning could
damage the product.
Do not expose the product to direct sunlight or other heat sources. This could cause the product to overheat
and malfunction.
Protect the product from moisture, excess heat, and equipment creating strong magnetic or electric elds (i.e.
speakers.).
Disconnect the power cable from the AC supply if the product malfunctions.
Your product is not intended for industrial use. It is for personal use only.
Condensation may occur if you store your product in cold temperatures. If transporting the product during the
winter, wait approximately 2 hours until the product has reached room temperature before using.
The batteries used with this product contain chemicals that are harmful to the environment.
Do not dispose of batteries in the general household trash.
Safety Information
HW-D600_D650S_XAA_0616.indd 4 2011-06-16 10:27:06
English 5
EN G
LISH
Contents
EN G
LISH
SAFETY INFORMATION
2 2 Safety Warnings
3 Important Safety Instructions
4 Precautions
GETTING STARTED
7 7 Key features of your new AV Receiver
8 Accessories
9 Description
9 Front Panel
10 Display
11 Rear Panel
12 Remote Control
CONNECTIONS
15 15 Speaker Positioning
17 Connecting the Speakers
19 Connecting External Devices/your TV via HDMI
20 HDMI Function
21 Connecting to your TV
22 Connecting a DVD or BD(Blu-ray) Player
23 Connecting a Cable, Satellite or Set-top Box
24 Connecting a CD Player
25 Connecting Using the External Ampli er
26 Connecting an iPod
28 Connecting the FM Antenna
28 Connecting AUX Components
SETUP
29 29 Before Using the AV Receiver
29 Home Menu
30 Selecting Digital/HDMI/Analog
31 Setup Menu Tree
34 Audio Setup
34 Selecting a Source Device And Connection Jack
(Digital Audio In)
34 Setting the Speaker Size
36 Connection Setting For Surround Back
37 Setting the Speaker Listening Distance
38 Setting the Speaker Level
39 Setting the Test Tone
40 Setting Dolby Pro Logic Mode
40 Surround Setup
40 Setting Dolby Pro Logic IIx
41 Setting NEO:6 Mode
41 Setting EX/ES Mode
42 Other Settings
42 Audio Sync
42 Tone Control
43 MP3 Enhancer
43 Smart Volume
44 Auto Calibration Setup
45 DRC Setup
45 Dual Mono Setup
46 HDMI Setup
HW-D600_D650S_XAA_0616.indd 5 2011-06-16 10:27:06
6 English
Contents
OPERATION
47 47 Using the Surround Modes
47 Using the AUDIO EFFECT Button On the Front of the
Main Unit
48 Using the S.DIRECT Button
49 Using the SUBWOOFER button
49 Listening to the Radio
50 To Listen in Mono/Stereo
50 Presetting Radio Stations
51 Using an iPod
51 Listening to Music (iPod audio function)
51 Watching a Movie (iPod video function)
52 Convenient Functions
52 Sleep Timer Function
53 Mute Function
53 Adjust the Display
53 Reset Function
54 Using Headphones
54 Software Upgrade
MISCELLANEOUS
55 55 Operating your TV with the Remote Control
56 Operating your DVD or BD Player with the Remote
Control
OTHER INFORMATION
57 57 Troubleshooting
58 Product Protection Function
58 Auto Calibration Error List
59 Speci cations
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
HW-D600_D650S_XAA_0616.indd 6 2011-06-16 10:27:07
English 7
01 G
etting Started
Key features of your new AV Receiver
Product Features
Digital AV Receiver This product is a pure digital AV receiver that performs digital signal processing to minimize signal distortion and loss.
Dolby Digital Effective audio encoding/decoding technology that provides a vivid surround sound in up to 5.1 channels.
Dolby Pro Logic llx Dolby Pro Logic IIx is a new technology that provides discrete 7.1 channels out of 2 channel or multi channel sources.It also provides Music,Movie and Game modes. Dolby Pro Logic IIx is an improved surround system that is optimized to a 7.1 CH multimedia system, enabling you to maximize your entertainment experience.
Dolby Pro Logic llz Dolby Pro Logic IIz adds front height channels to surround sound, creating a 7.1 playback system for video games, home music, and movies; bringing enhanced spatial effects and enveloping sound.
Dolby Digital EX Adds a surround back channel for more spacious sound compared to regular 5.1 channel Dolby Digital.
Dolby Digital Plus Dolby Digital Plus is the next-generation audio technology for all high-definition programming and media.
Dolby True-HD Dolby True-HD is Dolbys next-generation lossless technology developed for high-definition disc-based media.
DTS 96/24 DTS 96/24 encodes standard 16 bit/44.1 kHz sound to 24 bit/96kHz and applies it to a 5.1 CH sound track.
DTS (Digital Theater Systems) DTS provides a discrete 5.1 CH digital audio signal for both music and movie contents and uses less compression than Dolby Digital for richer sound.
DTS-HD (Master Audio, High Resolution) (Digital Theater Systems - High Definition) DTS-HD Audio provides the highest quality multi-channel sound possible. It delivers sound quality that matches the clear and vivid images of high-definition video.
DTS Provides a full range of 6 channels by converting a digital PCM or analog stereo signal using DTS digital matrix decoding.
Getting Started
HW-D600_D650S_XAA_0616.indd 7 2011-06-16 10:27:07
8 English
Getting Started DTS-ES (Extended Surround) The DTS-ES (Extended Surround) system is a new multi digital signal format that was developed by Digital Theater Systems Inc. Supporting full compatibility with the conventional DTS digital surround sound format, the DTS-ES (Extended Surround) system improves the surround signal for a 360-degree surround effect. DTS-ES adds an additional rear center surround channel for 6.1 channel sound.
iPod You can enjoy music files by connecting your iPod/iPhone to the AV Receiver with the supplied iPod dock.
SFE (Sound Field Effect) Using 32bit Audio Digital Signal Processing Provides more realistic surround sound with normal stereo audio sources.
Anynet+ (HDMI-CEC) Function Anynet+ is a function that can be used to operate this AV Receiver with a Samsung TV remote control, by connecting the receiver to a SAMSUNG TV using an HDMI Cable. (This function is available only in connection with Samsung TV and DVD player supporting Anynet+(HDMI-CEC).)
Accessories
Check the box for the supplied accessories listed below.
INPUT SELECT TV SOURCEPOWER
TONE
SETUP/MENU
MO/ST TUNER MEMORY
MUTE
S.DIRECT VOL TUNING
/CH
RETURN EXIT
INFO
SUB WOOFER
CROSS OVER
TUNER
3D SOUND
iPodAV SYNC
ASC
SAT GAME/TVBD/DVD CD
AUX
SLEEPNEO:6 DIMMER
DSPPROLOGIC AUDIO ASSIGN
1 2 3
4 5 6
7 8
0
9
AMP TV BD DVD
Remote Control (AH59-02370A)/ Batteries (AAA size) (4301-000116)
FM antenna (AH42-00017A) Users manual (AH68-02354X)
(For Speaker cable)
iPod Dock (AH96-00051A) ASC microphone (AH30-00099A) Toroidal Ferrite Core (3301-000144)
HW-D600_D650S_XAA_0616.indd 8 2011-06-16 10:27:07
English 9
01 G
etting Started
Description
Front Panel
1 DISPLAY Displays the speaker/audio input status, listening mode, etc.
2 VOLUME CONTROL Adjusts the volume level.
3 POWER BUTTON ( ) Turns the receiver on/off.
4 PHONES JACK Used to connect a set of headphones.
5 AUX IN JACKS Auxiliary AV input terminals used to connect a camcorder, portable DVD player or
gaming device.
6 ASC MIC JACK Used to connect the ASC MIC for setting up Auto calibration.
7 INPUT SELECT BUTTON Used to select a source.
FM TV BD/DVD SAT GAME AUX CD IPOD AUDIO IPOD VIDEO
8 AUDIO ASSIGN BUTTON Toggles to select an input mode for the selected source.
9 SOUND EFFECT BUTTON Toggles to select a surround sound mode.
10 SETUP BUTTON Displays the SETUP menu.
11 UP(,), DOWN(.), LEFT(<), RIGHT(>) BUTTONS
Used to move the cursor up, down, left or right.
Also used to select detailed options in the SOUND EFFECT mode and to change the
tone level.
12 ENTER BUTTON Used to select an item in the SETUP menu.
1 2 3
7 8 9 10 11 12 13 14 15 16 17 18 19 20654
HW-D600_D650S_XAA_0616.indd 9 2011-06-16 10:27:08
10 English
Getting Started
Display
1 SPEAKER INDICATORS Displays sound producing speakers.
2 LISTENING MODE INDICATORS Displays the current listening mode and audio source.
3 TUNING INDICATORS Displays the status of the current radio broadcast.
4 AUDIO INPUT INDICATORS Displays the audio input signal type of the currently connected external audio source.
5 SPEAKER LEVEL INDICATOR Displays the speaker level.
6 RADIO FREQUENCY INDICATORS Displays the current radio frequency range.
7 MESSAGE DISPLAY Informs you of the status of the receiver.
13 RETURN BUTTON Return to the previous menu.
14 ASC BUTTON Used to select the auto calibration mode.
15 S.DIRECT / STEREO BUTTON
Used to select the S.DIRECT or STEREO mode. (Output the original signal as it is without applying the sound eld effect or any other
sound effect.)
16 3D SOUND BUTTON Press to apply 3D Sound effect.
17 TONE CONTROL BUTTON Used to set the bass, treble level and tone to on/off.
18 TUNING MODE BUTTON Used to select the Manual or Preset mode for FM radio.
19 SELECT BUTTON Used to change the radio frequency.
20 MEMORY BUTTON Used to set a preset radio frequency.
1 2 3 4
67
5
HW-D600_D650S_XAA_0616.indd 10 2011-06-16 10:27:09
English 11
01 G
etting Started
1 VIDEO IN JACKS Receives the video signal from a video player (BD/DVD, SAT, TV).
2 USB PORT Can be only used for rmware upgrades.
3 HDMI OUT JACK Outputs digital video and audio signals simultaneously using an HDMI cable.
4 HDMI IN JACKS Receives digital video and audio signals simultaneously using an HDMI cable.
5 VIDEO OUT JACK Outputs the video signal to a monitors (TV, Projector etc).
6 FM ANTENNA JACK Connect the FM antenna.
7 iPod JACK Receives the audio/video signal from an iPod.
8 ONLY FOR SERVICE JACK Used for the service repair.
9 AUDIO IN JACKS Receives the audio signal from a video player (BD/DVD, SAT, TV).
10 OPTICAL IN JACKS (DIGITAL AUDIO IN) Receives the digital optical audio signal.
11 COAXIAL IN JACK (DIGITAL AUDIO IN) Receives the digital coaxial audio signal.
12 SURROUND BACK OUT JACKS Outputs the "Surround Back" analog signal to the external ampli er.
13 SUBWOOFER AUDIO OUT JACK Connect the subwoofers. (Active subwoofer only)
14 SPEAKERS OUT TERMINALS Speaker connection terminals.
Rear Panel
ONLY FOR SERVICE
ONLY FOR UPDATE
SURROUND BACK OUT
SUBWOOFER OUT
10 1197 14
421
6 8 1312
53
HW-D600_D650S_XAA_0616.indd 11 2011-06-16 10:27:09
12 English
Getting Started
Remote Control
Tour of the Remote Control
INPUT SELECT TV SOURCEPOWER
TONE
SETUP/MENU
MO/ST TUNER MEMORY
MUTE
S.DIRECT VOL TUNING
/CH
RETURN EXIT
INFO
TUNER
3D SOUND
iPodAV SYNC
ASC
SAT GAME/TVBD/DVD CD
AUX
SLEEP DIMMER
DSP
NEO:6
AUDIO ASSIGNPROLOGIC
1 2 3
4 5 6
7 8
0
9
TVAMP BD DVD
SUB WOOFER
CROSS OVER
1
3
4
6
7
8
9
10
11
12
13
14
15
22
20
5
212
16
23
17
19
18 35
36
24 25
26 27
28
29
31 30
32
33
34
HW-D600_D650S_XAA_0616.indd 12 2011-06-16 10:27:10
English 13
01 G
etting Started
1 POWER BUTTON Turns the receiver on/off.
2 TV BUTTON To change to TV mode, press the TV button.
3 AMP BUTTON To change to AMP mode, press the AMP button.
4 NUMBER BUTTONS Used to select a TV channel.
5 NEO : 6 BUTTON Select the desired NEO:6 mode.
6 PROLOGIC BUTTON Select the desired Dolby Pro Logic audio mode.
7 SKIP BUTTONS Press to skip backwards or forwards on a connected DVD/BD player or iPod.
8 STOP/PLAY BUTTON Press to stop/start playback on a connected DVD/BD player or iPod.
9 MUTE BUTTON Mutes the sound of a connected device.
10 VOLUME CONTROL BUTTONS Adjusts the volume of the selected device.
11 MO/ST BUTTON Select MONO or STEREO for radio broadcasts.
12 TONE BUTTON You can adjust the bass and treble level.
13 SETUP/MENU BUTTON Displays the SETUP menu.
14 UP/DOWN/LEFT/RIGHT BUTTONS Used to navigate the menus.
15 RETURN BUTTON Used to return to the previous menu from the SETUP menu.
16 FUNCTION SELECTOR BUTTONS Used to select an input source.
17 AV SYNC BUTTON Used to select the Audio Delay Mode.
18 ASC BUTTON Used to set the Auto Sound Calibration function.
19 SUBWOOFER BUTTON Used to select the Subwoofer.
20 INPUT SELECT, TV SOURCE BUTTON
Toggles to nd and select an input source. Press to select a connected TV's video source.
21 BD BUTTON To change to BD mode, press the BD button.
22 DVD BUTTON To change to DVD mode, press the DVD button.
23 SLEEP BUTTON Used to set the Sleep Timer.
24 DIMMER BUTTON Adjusts the brightness of the display.
25 DSP BUTTON Used to select the SFE mode.
26 AUDIO ASSIGN BUTTON Toggles to select an input mode for the selected source.
HW-D600_D650S_XAA_0616.indd 13 2011-06-16 10:27:11
14 English
Getting Started
27 SEARCH BUTTON Press to search backwards or forwards.
28 PAUSE BUTTON Pauses playback on a connected device.
29 TUNING/CHANNEL BUTTONS Used to change the radio broadcasting frequency or TV channel.
30 S.DIRECT BUTTON Press to select S.DIRECT mode.
31 TUNER MEMORY BUTTON Used to set a preset radio frequency.
32 INFO BUTTON Display information on the connected device currently being used.
33 ENTER BUTTON Used to select an item in the SETUP menu.
34 EXIT BUTTON Exits the SETUP menu.
35 3D SOUND BUTTON Press to apply 3D Sound effect.
36 CROSS OVER BUTTON Press to adjust the crossover frequency.
Installing batteries in the Remote Control
NOTE
Follow these precautions to avoid leaking or cracking cells:
Place batteries in the remote control so they
match the polarity : (+) to (+) and () to ().
Assuming typical AVR usage, the batteries last for
about one year.
Use the correct type of batteries. Batteries that
look similar may differ in voltage.
Always replace both batteries at the same time.
Do not expose the batteries to heat or a ame.
Operation Range of the Remote Control The remote control can be used up to approximately 23 feet/7
meters in a straight line. It can also be operated at a horizontal
angle of up to 30 from the remote control sensor.
* Battery size: AAA
HW-D600_D650S_XAA_0616.indd 14 2011-06-16 10:27:11
English 15
02 C
onnections
This section involves various methods of connecting the AV receiver to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Speaker Positioning
* Speakers are provided with model HW-D650S only. Model HW-D600 does not come with speakers.
Position of AV Receiver Place the AV Receiver on a dedicated stand or rack.
Subwoofer g The position of the subwoofer is not so critical. Place it anywhere you like.
Front Speakers Place these speakers in front of your listening position, facing inwards (about 45) toward you.
Place the speakers so that their tweeters will be at the same height as your ears.
Align the front face of the front speakers with the front face of the center speaker or place them slightly in
front of the center speaker.
Center Speaker It is best to install it at the same height as the front speakers.
You can also install it directly over or under the TV.
Surround Speakers Place these speakers behind your listening position.
If there isn't enough room, place these speakers so they face each other.
Place them about 2 to 3 feet (60 to 90cm) above your ears, facing slightly downward.
Unlike the front and center speakers, the surround speakers are used to handle mainly sound effects and
sound will not come from them all the time.
SL SR
6.6~9.8 feet (2~3m)
AV RECEIVER
Connections
HW-D600_D650S_XAA_0616.indd 15 2011-06-16 10:27:12
16 English
Connections
Surround Back Speakers SBL SBR (Option) If you are using two rear center speakers, place them behind the listening position.
Place the surround back speaker about 2.3-3.3 feet (70 cm to 1 m).
Front Height Speakers FHL FHR (Option) When using Dolby Pro Logic IIz, place the Surround Back Speakers on the FHL, FHR position above the
front L and front R speakers at least 3.3 feet(1 m) above each one.
NOTE When you attach the speakers to the wall, make sure to fasten them tightly so they do not fall off.
Speaker Con guration For the best surround-sound experience, you should connect ve speakers and a subwoofer.
The following table shows which channels you should use based on the number of speakers you have.
2 speakers 3 speakers 4 speakers 5 speakers 7 speakers
(DPL IIx) (Option)
7 speakers (DPL IIz) (Option)
SBL FHL
SBR FHR
NOTE
If you place a speaker near your TV set, screen color may be distorted because of the magnetic eld
generated by the speaker. If this occurs, place the speaker away from your TV set.
If you have a external stereo Ampli er and two Speakers and connect them, you can constitute 7
speaker con guration.
Also if you have a external active subwoofer, you can connect it.
HW-D600_D650S_XAA_0616.indd 16 2011-06-16 10:27:13
English 17
02 C
onnections
Model HW-D600 AV Receiver HW-D600
Model HW-D650S AV Receiver HW-D600 FRONT SPEAKER PS-FC560S CENTER SPEAKER PS-CC560S SURROUND SPEAKER PS-RC560S SUBWOOFER SPEAKER PS-WC560S
Connecting the Speakers
Connecting Speaker Wire
Loosen the knob by turning counterclockwise.
Insert the bare part of the wire into the hole in the side of each
terminal.
Tighten the knob by turning clockwise to secure the wire.
1. 2.
3.
ONLY FOR SERVICE
ONLY FOR UPDATE
SURROUND BACK OUT
SUBWOOFER OUT
SUBWOOFER OUT
SURROUND (R)FRONT (R)
CENTER
SURROUND (L)
FRONT (L)
SUBWOOFER
ACTIVE SUBWOOFER (not supplied)
HW-D600_D650S_XAA_0616.indd 17 2011-06-16 10:27:16
18 English
Connections NOTE Speakers are provided with model HW-D650S only. Model HW-D600 does not come with
speakers. Contact a Samsung Electronics retailer for purchasing.
Keep the subwoofer speaker out of reach of children to prevent them from inserting their hands
or objects into the duct (hole).
Never touch speaker terminals while the power is on. Doing so could result in electric shock.
Make sure the polarities (+ and -) are correct.
If you want to use a active subwoofer speaker (not supplied), connect a subwoofer speaker into
the SUBWOOFER OUT terminal in the rear panel.
By using an external ampli er, you can connect the surround back speakers (SBL/SBR) or front
height speakers(FHL/FHR) to improve your system up to a 7.1 channel system.
Attaching the Toroidal Ferrite Core to the Speaker Cable
Open the toroidal ferrite cores by pulling the lock lever.
Arrange all the speaker cables that are connected to the unit and make a loop.
Attach the ferrite core as close as possible to the unit.
Place the toroidal ferrite core on the looped speaker cable as shown, and then press it closed it
until you hear a click.
1.
2.
3.
SURROUND BACK OUT
SUBWOOFER OUT
HW-D600_D650S_XAA_0616.indd 18 2011-06-16 10:27:20
English 19
02 C
onnections
Connecting External Devices/your TV via HDMI
HDMI is a digital standard interface for connection to such devices as a TV, projector, DVD player, Blu-ray
player, set-top box and more.
HDMI removes any loss of signal from analog conversion, enabling you to enjoy video and audio sound
quality as it was originally created in the digital source.
By connecting through the HDMI(High-De nition Multimedia Interface) interface, you can play back digital
video and audio.
High-bandwidth Digital Content Protection System (HDCP) support To play digital contents through the HDMI connection, both the connected external device and TV must
support High-bandwidth Digital Content Protection System (HDCP). This product supports HDCP.
Compatibility with a TV Supporting HDMI
A TV with an HDMI jack. Video/Audio
A TV with a DVI-D jack (TV supporting HDCP) Video
A TV with a DVI-D jack (TV not supporting HDCP) -
NOTE Audio from SACD discs will not be heard with this connection. To play a DVD disc whose copyright is
protected by CPPM, use a player supporting CPPM.
The quality of the audio output through the HDMI jack (sampling frequency and bit rate) may be limited by the
performance of the connected device.
Since HDMI connection supports both video and audio, you dont have to connect an additional audio cable.
ONLY FOR SERVICE
ONLY FOR UPDATE
SURROUND BACK OUT
SUBWOOFER OUT
OPTICAL OUT
SAT (Cable/Satellite/Set-top box)
Camcorder
Connect it if you want to use Anynet+. (If connected TV support ARC, it is not necessary to connect the OPTICAL OUT.)
DVD or Blu-ray Player
Game console or HDTV Tuner (HDTV Terrestrial Receiver)
HW-D600_D650S_XAA_0616.indd 19 2011-06-16 10:27:23
20 English
Connections HDMI Function
Using Anynet+ (HDMI-CEC)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's
remote control. Anynet + can be used by connecting this AV Receiver to a SAMSUNG TV using an
HDMI Cable. This is only available with SAMSUNG TVs and SAMSUNG AV Products that support
Anynet+.
Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 19)
Set the Anynet+ function on your TV.
(See the TV instructions manual for more information.)
You can operate the volume on the AV receiver by using Volume buttons on the TV remote
control.
To Turn on Anynet+
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between INPUT and SETUP OFF.
Press the buttons to select OPTION, and then press the ENTER button.
Press the buttons to select HDMI SETUP, and then press the ENTER button.
Press the buttons to select HDMI ANYNET+, and then press the ENTER button.
Press the buttons to set ANYNET+ to ON, and then press the ENTER button.
To exit setup mode
Press the SETUP/MENU or EXIT button on the remote control.
SETUP OFF appears on the display and Setup Mode is exited.
NOTE If you use an HDMI cable to connect a Samsung TV to your AV Receiver, you can operate the AV
receiver using the TVs remote control. This function is available only in connection with Samsung
TV and DVD player supporting Anynet + (HDMI-CEC).
Please check your TV for the ANYNET+ logo. If your TV has an ANYNET+ logo, then it supports
the Anynet+ function.
When you are making Anynet+ connection, do not connect more than two AV receivers (Anynet+
installed). Otherwise, it can cause a malfunction.
1. 2.
1.
2. 3. 4. 5.
HW-D600_D650S_XAA_0616.indd 20 2011-06-16 10:27:26
English 21
02 C
onnections
Connecting to your TV
Video Connection
Connect the Video cable (not supplied) from the VIDEO OUT (MONITOR) jack on the back of your AV Receiver to
the Video Input jack on your TV.
Audio Connection
Connect the Digital Input (OPTICAL 3) on your AV Receiver to the Digital Output of the TV.
OR Connect AUDIO IN (TV) on your AV Receiver to the Audio Out of the TV.
ONLY FOR SERVICE
ONLY FOR UPDATE
SURROUND BACK OUT
SUBWOOFER OUT
VIDEO IN
AUDIO OUT
OPTICAL OUT
or
HW-D600_D650S_XAA_0616.indd 21 2011-06-16 10:27:26
22 English
Connections Connecting a DVD or BD(Blu-ray) Player
Video Connection
Connect a Video cable (not supplied) from the VIDEO IN (BD/DVD) jack on the back of your AV Receiver to the
Video Output jack on your DVD/BD player.
Audio Connection
Connect the Digital Input (OPTICAL 1) on your AV Receiver to the Digital Output of the DVD/BD player.
OR Connect AUDIO IN (BD/DVD) on your AV Receiver to the Audio Out of the DVD/BD player.
ONLY FOR SERVICE
ONLY FOR UPDATE
SURROUND BACK OUT
SUBWOOFER OUT
OPTICAL OUT
AUDIO OUT
VIDEO OUT
VIDEO IN
or
or
or DVD or BD Player
HW-D600_D650S_XAA_0616.indd 22 2011-06-16 10:27:30
English 23
02 C
onnections
Connecting a Cable, Satellite or Set-top Box
Video Connection
Connect a Video cable (not supplied) from the VIDEO IN (SAT) jack on the back of your AV Receiver to the Video
Output jack on your SAT.
Audio Connection
Connect the Digital Input (OPTICAL 2) on your AV Receiver to the Digital Output of the SAT.
OR Connect AUDIO IN (SAT) on your AV Receiver to the Audio Out of the SAT.
NOTE Disconnect the power plug from the outlet if you will not use this unit for a long period of time.
If the cable/set-top box has only one audio output jack, connect it to either the right or left audio input jack of
the main unit. Connect the audio cable's red plug to the red jack and white cable to the white jack.
ONLY FOR SERVICE
ONLY FOR UPDATE
SURROUND BACK OUT
SUBWOOFER OUT
VIDEO IN
AUDIO OUT
VIDEO OUT
OPTICAL OUT
SAT(Cable/Satellite/Set-top box)
or
or
or
HW-D600_D650S_XAA_0616.indd 23 2011-06-16 10:27:33
24 English
Connections Connecting a CD Player
Audio Connection
Connect the Digital Input (COAXIAL) on your AV Receiver to the Digital Output of the CD Player.
OR Connect AUDIO IN (CD) on your AV Receiver to the Audio Out of the CD player.
NOTE Connect the audio cable's red plug to the red jack and white cable to the white jack.
If the CD player has only one audio output jack, connect it to either the right or left audio input jack of the
main unit.
ONLY FOR SERVICE
ONLY FOR UPDATE
SURROUND BACK OUT
SUBWOOFER OUT
AUDIO OUT
COAXIAL OUT
or
CD Player
HW-D600_D650S_XAA_0616.indd 24 2011-06-16 10:27:37
English 25
02 C
onnections
Connecting Using the External Ampli er
By factory default, the AV receiver is designed as 5.1 CH surround sound system. However, it can be
extended to 7.1CH surround sound system in combination with a separate ampli er and additional
speakers as shown below:
Use an RCA audio cable to connect the AV receivers SURROUND BACK OUT L/R jacks to an
analog audio input on your external ampli er for SURROUND BACK or FRONT HEIGHT.
Connect your SURROUND BACK Speakers or Front HEIGHT Speakers to the speaker terminals on
your external ampli er.
7.1 channel settings using an external ampli er.
NOTE Surround Back Out only outputs analog signal.
AV Receiver's SURROUND BACK OUT provides the Volume Control.
The external ampli er with volume control and without volume control can be used.
When you use the external ampli er with volume control, external ampli er's volume should be
adjusted to a suitable position.
The volume control for the 7.1 channel can be controlled in this AV receiver.
ONLY FOR SERVICE
ONLY FOR UPDATE
SURROUND BACK OUT
SUBWOOFER OUT
SURROUND BACK OUT
SBL SBR
SURROUND BACK
SL
SBL SBR
SR
6.6~9.8 feet (2~3m)
Bi-AMP
SL SR
6.6~9.8 feet (2~3m)
Bi-AMP
FHL FHR
L, R, C, SW, SL, SR, SBL, SBR ( Dolby Pro Logic IIx ) L, R, C, SW, SL, SR, FHL, FHR( Dolby Pro Logic IIz)
AV RECEIVER AV RECEIVER External Ampli er
External Ampli er
External Ampli er
HW-D600_D650S_XAA_0616.indd 25 2011-06-16 10:27:40
26 English
Connections Connecting an iPod
You can listen to audio from an iPod through the main unit. For iPod operation with your receiver, see
this page and pages 51 ~ 52.
Connect the iPod dock connector to the iPod jack on your reciever.
Place the iPod in the Dock.
If you want to play a movie stored in your iPod player, you should set the player's TV Out option to
On before inserting it into the dock. See pages 51 ~ 52.
Press the iPod button on the remote control.
You can also use the INPUT SELECT on the main unit.
The mode switches as follows :
FM TV BD/DVD SAT GAME AUX CD IPOD AUDIO IPOD VIDEO
NOTE You must have the VIDEO (Monitor or TV) output connected to your TV to view iPod video. See
page 21.
Adjust the volume to a moderate level before you connect your iPod and AV Receiver.
When the unit is powered on and you connect an iPod, the unit will charge your iPod's battery.
Make sure to connect the dock connector so that the label SAMSUNG faces upward.
1. 2.
3.
ONLY FOR SERVICE
ONLY FOR UPDATE
SURROUND BACK OUT
SUBWOOFER OUT
HW-D600_D650S_XAA_0616.indd 26 2011-06-16 10:27:44
English 27
02 C
onnections
Disconnecting an iPod
Follow the steps below to prevent damage to an iPod and data when disconnecting from your
AV receiver.
Use the INPUT SELECT on the main unit to switch to a mode other than IPOD AUDIO or IPOD VIDEO.
OR
Turn off the AV Receiver.
Disconnect the iPod player from the iPod dock, or remove the iPod dock connector from the AV
receiver.
iPod/iPhone Models You Can Use with This Product
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod with dock connector
iPod with Click Wheel
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPhone 4
iPhone 3GS
iPhone 3G
iPhone
NOTE Made for iPod means that an electronic accessory has been designed to connect speci cally to iPods and
has been certi ed by the developer to meet Apple performance standards.
Made for iPhone means that an electronic accessory has been designed to connect speci cally to iPhones
and has been certi ed by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory
standards.
iPod is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.
1.
1. 2.
HW-D600_D650S_XAA_0616.indd 27 2011-06-16 10:27:48
28 English
Connections Connecting the FM Antenna
Connect the FM antenna supplied to the FM ANTENNA terminal as a temporary measure.
Slowly move the antenna wire around until you nd a location where reception is good, then fasten it to a wall
or other rigid surface.
NOTE Do not place the antenna cable close to the power cord. Keep it as far away as possible.
If you experience poor FM reception, use an external antenna.
Connecting AUX Components
You can connect external devices you use for a short time (camcorder, game console, mobile equipment,
etc.) to the front of this unit for convenience.
1. 2.
3.
ONLY FOR SERVICE
ONLY FOR UPDATE
SURROUND BACK OUT
SUBWOOFER OUT
FM antenna (supplied)
AUDIO OUT
VIDEO OUT Camcorder
HW-D600_D650S_XAA_0616.indd 28 2011-06-16 10:27:48
English 29
03 SetupFor your convenience, you can set this AV receiver's features for the best use.
Before Using the AV Receiver
Turning On/Off
Connect the power plug to the outlet.
This unit will set to Standby mode.
Press the POWER button on the main unit for 2 seconds.
This unit will be turned on.
You can also turn the unit on/off by pressing the POWER button on the remote control.
Remote Control Functions
You can operate your AMP (this AV receiver)/ TV and BD(Samsung only)/DVD player with this remote
control. See pages 55 ~ 56 for more details.
To Select a Function
Method 1
Press the INPUT SELECT button on the remote control.
Each time you press this button, FM TV BD/DVD SAT GAME AUX CD IPOD AUDIO IPOD VIDEO will be selected in turn.
Method 2
Press the BD/DVD, SAT, GAME/TV, CD, iPod or TUNER button.
You can directly select the desired function.
Home Menu
Use the HDMI cable to connect between main unit and
monitor. Press SETUP/MENU to display the INPUT
message on the display screen. You will see the OSD
menu in a few seconds.
NOTE
The OSD menu will be displayed only if you use the
HDMI cable for the connection.
For using the OSD menus, refer to using the menus
on the display screen.
The OSD (On Screen Display) may change in this
product after you upgrade the software version.
INPUT SELECTIONINPUT
SPEAKER
SURROUND
OPTION
> MOVE SELECT ' RETURN EXIT
Q
Setup
HW-D600_D650S_XAA_0616.indd 29 2011-06-16 10:27:51
30 English
Setup
Selecting Digital/HDMI/Analog
You can listen to sound of analog, HDMI, optical input using this unit.
Press the INPUT SELECT button on the remote control to select a
desired function (BD/DVD, SAT, TV, CD, AUX). See page 29.
Press the AUDIO ASSIGN button on the remote control to select the
audio input source of the external device you have connected.
Each time you press this button, the input mode changes as
follows:
For BD/DVD function
For SAT function
For TV function
For CD function
For AUX function
NOTE You can also change the input mode by pressing the AUDIO ASSIGN button on the front of your
AV Receiver.
You can enjoy Dolby Digital or DTS if you connect the digital audio output jack of an external
audio component to the optical or coaxial digital audio input jack on the main unit.
For the TV function, the TV ARC menu will be displayed only if an ARC-compliant TV is
connected.
1.
2.
HW-D600_D650S_XAA_0616.indd 30 2011-06-16 10:27:51
English 31
03 SetupSetup Menu Tree
Heres a quick look at how the setup menus are organized on your AV Receiver.
COAXIAL
BD/DVD
OPTICAL1, 2
COAXIAL
SAT
OPTICAL1, 2
COAXIAL
CD
OPTICAL1, 2
SPEAKER SIZE
SPEAKER DISTANCE
SPEAKER LEVEL TEST TONE
DPLIIx
DTS NEO:6
EX/ES
AUDIO SYNC
MP3 ENHANCER
SMART VOLUME
AUTO CALIBRATION
DRC
HDMI SETUP
7.1 CHANNEL
DUAL MONO
SPEAKER
SURROUND
OPTION
INPUT SELECTION
INPUT
TONE CONTROL
HW-D600_D650S_XAA_0616.indd 31 2011-06-16 10:27:55
32 English
Setup
NOTE If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front
Height Speaker (FHL/FHR).
1 ~ 30FT (1 foot steps) , default : 10FT
CENTER
SURROND LEFT
FRONT LEFT
FRONT RIGHT
SURROUND RIGHT
SURROUND BACK LEFT
SPEAKER
SPEAKER SIZE
SPEAKER DISTANCE
TEST TONE
SURROUND BACK RIGHT
SUBWOOFER
-10 ~ +10dB (1dB step) , default : 00dB
SPEAKER LEVEL
SURROUND
SURROUND BACK
CENTER
FRONT HEIGHT
LARGE NONESMALL
LARGE NONESMALL
60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 180Hz, 200Hz
SUBWOOFER
CROSSOVER
YES NO
FRONT LARGE SMALL
PLIIz
SURR.BACK7.1 CHANNEL
MANUAL
LARGE NONESMALL
AUTO
FRONT HEIGHT LEFT
FRONT HEIGHT RIGHT
CENTER
SURROND LEFT
FRONT LEFT
FRONT RIGHT
SURROUND RIGHT
SURROUND BACK LEFT
SURROUND BACK RIGHT
SUBWOOFER
FRONT HEIGHT LEFT
FRONT HEIGHT RIGHT
move to "Test Tone check Page"
LARGE SMALL
HW-D600_D650S_XAA_0616.indd 32 2011-06-16 10:27:55
English 33
03 Setup
DPLIIx
SURROUND
CENTER WIDTH
PANORAMA
DIMENSION
CENTER IMAGEDTS NEO:6
AUTO OFF ONEX/ES
0~7
OFF ON
0~5
MP3 ENHANCER
SMART VOLUME
AUTO CALIBRATION
OFF ON
OFF ON
STANDARDDRC
AUTO SYNC
HDMI AUDIO
HDMI SETUP
AVR TV
OFF ON
DUAL MONO CH1
OFF ON
CH2 BOTH
ARC
OFF AUTO
HDMI ANYNET+
MAXIMUMAUTO
AUDIO SYNC 0ms~240ms (10ms step)
OPTION
TONE CONTROL
OFF ON
TONE
BASS
TREBLE
-6dB ~ +6dB (1dB Step)
-6dB ~ +6dB (1dB Step)
MODE
OFF ON
MEASUREMENT move to "Auto Calibration Measurement Page"
MINIMUM
-7~+7
HW-D600_D650S_XAA_0616.indd 33 2011-06-16 10:27:55
34 English
Setup
Audio Setup
Selecting a Source Device And Connection Jack (Digital Audio In)
Select the external devices you have connected to the receiver.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches
between INPUT and SETUP OFF.
Press the ENTER button to select INPUT.
Press the ENTER button to select INPUT SELECTION.
Press the buttons to select a desired jack.
Devices switch as follows; BD/DVD, SAT, CD
NOTE You can also use the SETUP, ,,., ENTER, RETURN
buttons on the front of your AV Receiver.
Setting the Speaker Size Signal outputs and frequency response from the speaker will be adjusted according to your speaker
con guration and whether certain speakers are used or not.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the buttons to select SPEAKER, and then press
the ENTER button.
Press the buttons to select SPK SIZE, and then press the
ENTER button.
Press the buttons to select the speaker you want, and
then press the ENTER button.
Each time you press the buttons, FRONT
CENTER SURR SBACK(DPLIIx) / FRONTH(DPLIIz)
SUBW CROVR will be selected in turn.
Press the buttons to set the mode (LARGE,
SMALL etc.) for the selected speaker.
Repeat steps 2-5 to set the mode for each speaker.
1.
2. 3. 4.
1.
2.
3.
4.
5.
6.
FRONT : SMALL
CENTER : SMALL
SURROUND : SMALL
SURROUND BACK : SMALL
SUBWOOFER : YES
CROSSOVER : 100Hz
SPEAKER SIZE
> MOVE SELECT ' RETURN EXIT
USER
LARGE
SMALL
HW-D600_D650S_XAA_0616.indd 34 2011-06-16 10:27:55
English 35
03 Setup- To exit setup mode -
Press the SETUP/MENU or EXIT button on the remote control.
SETUP OFF appears on the display and Setup Mode is exited.
Setting the Speaker
SPEAKER Possible Settings Default Setting
FRONT (Front) LARGE, SMALL SMALL
CENTER (Center) LARGE, SMALL, NONE SMALL
SURR (Surround) LARGE, SMALL, NONE SMALL
SBACK (Surround Back) LARGE, SMALL, NONE NONE
FRONTH (Front Height) LARGE, SMALL SMALL
SUBW (Subwoofer) YES, NO YES
CROVR (Crossover Frequency) 60, 80, 100,120, 150, 180, 200(Hz) 100Hz
LARGE : Select when using large speakers. You can listen to full range sound.
SMALL : Select this when using small speakers.
NONE : Select when no speaker is used.
YES (subwoofer) : Select when using the subwoofer speaker.
NO (subwoofer) : Select when not using the subwoofer speaker.
CROVR : Select the crossover frequency for the best bass response in your speakers.
NOTE You can also use the SETUP, ,,., ENTER, RETURN buttons on the front of your AV Receiver.
When the Front speaker is only set to LARGE, you can select LARGE of other speakers.
When the Surround speaker is set to LARGE, you can select LARGE of SBACK (Surround Back)
speaker.
When the 7.1 CHANNEL is set to PLIIz, you can not select NONE of surround speaker and front
height speaker.
You can also change the crossover frequency by using the CROSS OVER, <, > buttons on the
remote control.
HW-D600_D650S_XAA_0616.indd 35 2011-06-16 10:27:56
36 English
Setup Connection Setting For Surround Back
Settings for the surround back speaker differ depending on the connection method and installation site
of the speaker to be connected. You must con gure the 7.1 CHANNEL settings according to the
connected speaker before you listen to music properly.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the buttons to select SPEAKER, and then press the
ENTER button.
Press the buttons to select 7.1 CHANNEL, and then
press the ENTER button.
Press the to select a proper setting for the surround back
speaker.
SURR.BACK : Select this if you want to install the surround back speaker in the default settings. With this setting, you can enable the Dolby Pro Logic IIx mode. PLIIz : Select this if you want to install the surround back speaker in the top front corner. With this setting, you can enable the Dolby Pro Logic IIz mode.
NOTE Depending on the 7.1 CHANNEL settings, the surround back speaker or front height speaker
menus may not be activated or may differ in the speaker menu:
SPEAKER SIZE, SPEAKER LEVEL, SPEAKER DISTANCE.
Depending on your setting, you may not use different features simultaneously.
If you set SURR-BACK, for instance, you cannot use the following feature: PLIIz.
1.
2.
3.
4.
SPEAKER SIZE
7.1 CHANNEL
SPEAKER DISTANCE
SPEAKER LEVEL
TEST TONE
INPUT
SPEAKER
SURROUND
OPTION
> MOVE SELECT ' RETURN EXIT
Q
SURR.BACK
PLIIz
HW-D600_D650S_XAA_0616.indd 36 2011-06-16 10:27:56
English 37
03 SetupSetting the Speaker Listening Distance
If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of
the audio signals from the center and surround speakers.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the buttons to select SPEAKER, and then press
the ENTER button.
Press the buttons to select SPK DISTANCE, and then
press the ENTER button.
Press the buttons to select the speaker you want.
Each time you press the buttons, F.L F.R CEN
S.L S.R SBL SBR S.W will be selected in turn.
Press the buttons to set the Speaker Distance.
For the FRONT LEFT, FRONT RIGHT, CENTER, SURR.
LEFT, SURR. RIGHT, SURRBACK.LEFT,
SURRBACK.RIGHT and SUBWOOFER Speakers,
you can set the distance from the speaker to
listening position between 1ft ~ 30ft (0.3~9.0m) in
intervals of 1ft (0.3m).
- Setting Speaker Distance - Set the distance from the speaker to listening position in intervals of 1ft(0.3m).
F.L (front left) : 1ft ~ 30ft SW (subwoofer) : 1ft ~ 30ft
F.R (front right) : 1ft ~ 30ft SBL (surround back left) : 1ft ~ 30ft
S.L (surround left) : 1ft ~ 30ft SBR (surround back right) : 1ft ~ 30ft
S.R (surround right) : 1ft ~ 30ft FHL (front height left) : 1ft ~ 30ft
CEN (center) : 1ft ~ 30ft FHR (front height right) : 1ft ~ 30ft
NOTE If the listening position is beyond the range of the speaker distance setup, set the speaker
distance to the maximum.
If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front
Height Speaker (FHL/FHR).
1.
2.
3.
4.
5.
FRONT LEFT
FRONT RIGHT
CENTER
SURROUND LEFT
SURROUND RIGHT
SPEAKER DISTANCE
> MOVE SELECT ' RETURN EXIT
10FT
10FT
10FT
10FT
10FT
HW-D600_D650S_XAA_0616.indd 37 2011-06-16 10:27:57
38 English
Setup Setting the Speaker Level You can set the balance and level of speakers.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the buttons to select SPEAKER, and then press
the ENTER button.
Press the buttons to select SPK LEVEL, and then press
the ENTER button.
Press the buttons to select the speaker you want.
Each time you press this button, F.L F.R CEN S.L
S.R SBL SBR S.W will be selected in turn.
Press the buttons to set the Speaker Level mode.
You can adjust it from -10 to +10dB in 1 step increments.
The sound gets quieter at -10dB and louder at
+10dB.
- Setting Speaker Level -
F.L (front left) : -10 ~ +10dB SW (subwoofer) : -10 ~ +10dB
F.R (front right) : -10 ~ +10dB SBL (surround back left) : -10 ~ +10dB
S.L (surround left) : -10 ~ +10dB SBR (surround back right) : -10 ~ +10dB
S.R (surround right) : -10 ~ +10dB FHL (front height left) : -10 ~ +10dB
CEN (center) : -10 ~ +10dB FHR (front height right) : -10 ~ +10dB
NOTE If Dolby Pro Logic IIz is set to On, the Surround Back speaker (SBL/SBR) is changed to the Front
Height Speaker (FHL/FHR).
You can also change the subwoofer level by using the SUBWOOFER, <, > buttons on the remote
control.
1.
2.
3.
4.
5.
FRONT LEFT
FRONT RIGHT
CENTER
SURROUND LEFT
SURROUND RIGHT
SPEAKER LEVEL
> MOVE SELECT ' RETURN EXIT
0dB
0dB
0dB
0dB
0dB
HW-D600_D650S_XAA_0616.indd 38 2011-06-16 10:27:57
English 39
03 SetupSetting the Test Tone
Use the test tone to check the speaker connection status or level.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the buttons to select SPEAKER, and then press
the ENTER button.
Press the buttons to select TEST TONE, and then press
the ENTER button.
Press the buttons to select the option you want, and then
press the ENTER button.
AUTO : Test signal will be automatically output as follows;
F.L CEN S.W F.R S.R S.L.
- During test tone output, press the buttons to adjust the
speaker output level from -10 to +10 dB by 1 step.
MANUAL : Enables you to adjust the output level of the
speaker manually.
1) Press the ENTER button to select the speaker
you want.
Each time you press the ENTER button, F.L
CEN S.W F.R S.R S.L will be
selected in turn.
2) Press the buttons to set the Test Tone
mode you want.
You can adjust the speaker output level from -10
to +10dB by 1 step.
The sound gets quieter at -10dB and louder at
+10dB.
- Test Tone Output -
F.L (front left) : -10 ~ +10dB CEN (center) : -10 ~ +10dB F.R (front right) : -10 ~ +10dB S.W (subwoofer) : -10 ~ +10dB S L (surround left) : -10 ~ +10dB SBL (surround back left) : -10 ~ +10dB S.R (surround right) : -10 ~ +10dB SBR (surround back right) : -10 ~ +10dB
- To stop test tone - Press the SETUP/MENU button once.
SETUP OFF appears on the display and test tone stops.
NOTE
In the Dolby Pro Logic IIx mode, test signal will be automatically output as follows :
F.L CEN S.W F.R S.R SBR SBL S.L.
In the Dolby Pro Logic IIz mode, test signal will be automatically output as follows :
F.L FHL CEN S.W FHR F.R S.R S.L.
1.
2.
3.
4.
> MOVE SELECT ' RETURN EXIT
F L 0 d B
SL 0dB
SR 0dB
FR 0dBC
0dB SW
0dB
USER
MANUAL
HW-D600_D650S_XAA_0616.indd 39 2011-06-16 10:27:58
40 English
Setup
Setting Dolby Pro Logic Mode
This mode provides up to 7.1 channel sound from 2 channel sources, or provides 7.1 channel sound
from 5.1 channel sources for music or movie mode.
Press the PROLOGIC button on the remote control.
MOVIE : Adds realism to the movie soundtrack.
MUSIC : Provides up to 7.1 channel surround sound for digital, analog or existing stereo sources.
GAME : Enhances the excitement of the games sound.
MATRIX : You will hear up to 7.1 channel surround sound.
PL (Pro Logic) : You will experience a surround effect with 5.1 channel surround sound.
OFF : Output the original signal as it is without applying the sound eld effect or any other sound
effect.
Surround Setup
Setting Dolby Pro Logic IIx
This function works only in Dolby Pro Logic IIx MUSIC mode.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the buttons to select SURROUND, and then press
the ENTER button.
Press the buttons to select DPLIIx, and then press the
ENTER button.
Press the buttons to select the option you want, and then
press the ENTER button.
PANORAMA : Press the buttons to select ON or OFF.
(This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect with
side wall imaging.)
DIMENSION : Press the buttons to set from -7 to 7.
(Incrementally adjusts the sound eld (DSP)from the front or surround.)
C- WIDTH : Press the buttons to set from 0 to 7.
(This sets the width of the center sound image. The higher the setting, the less sound comes
from the center speaker.)
NOTE PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the Dolby Pro Logic
Mode is set to MUSIC.
You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital, Dolly
Digital +, Dolby true HD, DTS, DTS-HD Master Audio.
Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or
48KHz.
When Dolby Pro Logic IIz is set ON, Dolby Pro Logic IIx can not be used.
1.
2.
3.
4.
HW-D600_D650S_XAA_0616.indd 40 2011-06-16 10:27:58
English 41
03 SetupSetting NEO:6 Mode
You can play back 2 channel sound over 5.1 or 7.1 channels when enjoying music or a movie.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between INPUT and SETUP OFF.
Press the buttons to select SURROUND, and then press the ENTER button.
Press the buttons to select DTS NEO:6, and then press the ENTER button.
Press the ENTER buttons to set the C-IMAGE mode you want. Press the buttons to set the C-IMAGE from 0 to 5. This parameter adjusts the center image through the front and center speakers. "5" is the wider.
Using NEO:6 Mode
Press the NEO:6 button on the remote control.
MUSIC : When listening to music, you can experience sound effects as if you are listening to the actual performance.
CINEMA : Adds realism to the movie soundtrack. OFF : Output the original signal as it is without applying the sound eld effect or any other sound effect.
NOTE NEO:6 works only for 2-ch audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
Setting EX/ES Mode
When surround back speakers are connected, you can listen to 7.1 multi-channel sound using the built-in Dolby Digital Surround EX or DTS ES decoder. This function works when a Dolby Digital or DTS source (such as a DVD player) is input, and does not work with L.PCM and Dolby Digital 2 channel sources.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between INPUT and SETUP OFF.
Press the buttons to select SURROUND, and then press the ENTER button.
Press the buttons to select EX/ES, and then press the ENTER button.
Press the buttons to set the EX/ES mode you want.
AUTO : If the unit receives an audio signal that it can recognize, it will select an optimal decoder for playback in 7.1 channels. If the ampli er does not recognize the audio signal, it will not play in 7.1 channel automatically.
OFF : Dolby Digital Surround EX / DTS ES decoder will not be used for playback.
ON : Dolby Digital or DTS signal will be played in 7.1 channel using Dolby Digital Surround EX / DTS ES decoder.
NOTE You cannot use DTS-ES without surround back speakers connected.
1.
2.
3.
4.
1.
2.
3.
4.
HW-D600_D650S_XAA_0616.indd 41 2011-06-16 10:27:59
42 English
Setup
Other Settings
Audio Sync
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio
delay time to match the video.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches
between INPUT and SETUP OFF.
Press the buttons to select OPTION, and then press the
ENTER button.
Press the buttons to select AUDIO SYNC, and then
press the ENTER button.
Press the buttons to set the AUDIO SYNC Delay Time.
You can adjust it from 0 to 240MS in 10MS steps.
Tone Control
This will enable you to adjust the bass and treble level.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the buttons to select OPTION, and then press the
ENTER button.
Press the buttons to select TONE CONTROL, and then
press the ENTER button.
Press the buttons to select TONE, and then press the
ENTER button.
Press the buttons to select ON or OFF you want, and then
press the ENTER button.
If it is set to TONE OFF, the Tone Control function will be
disabled.
Press the buttons to set the Tone Control mode you want.
BASS & TREBLE : Press the buttons to set from -6 to 6.
Each time you press this button, TONE BASS TREBLE will be selected in turn.
You can adjust it from -6 to +6dB by 1 step.
The sound gets quieter at -6dB and louder at +6dB.
NOTE The Tone Control function can be applied to the front channels only.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
HW-D600_D650S_XAA_0616.indd 42 2011-06-16 10:27:59
English 43
03 SetupMP3 Enhancer
This also helps enhance your sound experience (ex. mp3 music). Use this if you want to hear better
sound from a low quality mp3 source.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches
between INPUT and SETUP OFF.
Press the buttons to select OPTION, and then press the
ENTER button.
Press the buttons to select MP3 ENHANCER, and then
press the ENTER button.
Press the buttons to select ON or OFF.
Smart Volume
This will regulate and stabilize the volume level against a drastic volume change when changing
channels or during a scene transition.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches
between INPUT and SETUP OFF.
Press the buttons to select OPTION, and then press the
ENTER button.
Press the buttons to select SMART VOLUME, and then
press the ENTER button.
Press the buttons to select ON or OFF.
1.
2.
3.
4.
1.
2.
3.
4.
HW-D600_D650S_XAA_0616.indd 43 2011-06-16 10:28:00
44 English
Setup Auto Calibration Setup
By setting the calibration just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a 5.1-channel sound eld optimized for your environment.
- Before Setting - Plug the ASC microphone into the ASC MIC jack.
Place the ASC microphone at the listening position.
Press the ASC button on the front panel, and then press the ENTER button.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the buttons to select OPTION, and then press the
ENTER button.
Press the buttons to select AUTO CALIBRATION, and
then press the ENTER button.
Press the buttons to select MEASUREMENT, and then
press the ENTER button.
To create the optimal 5.1 channel sound eld, the selections
are in the following sequence:
L C R SR SBR SBL SL SW MODE ON : The auto calibration mode is set to on.
MODE OFF: The auto calibration mode is set to off.
To cancel the Auto Calibration setup. This will be automatically reverted if you
press the RETURN button.
If auto calibration error occurs, see "Auto
Calibration Error List" on page 58.
1. 2. 3.
1.
2.
3.
4.
ASC Microphone
> MOVE SELECT ' RETURN EXIT
CALIBRATION
FL 0dB
0.3m
SL 0dB
0.3m SBL 0dB
0.0m
SBR 0dB
0.0m
SR 0dB
0.3m
FR 0dB
0.3m C
0dB 0.3m
SW 0dB
0.3m
USER
HW-D600_D650S_XAA_0616.indd 44 2011-06-16 10:28:00
English 45
03 SetupNOTE
Setting the calibration takes about 3 minutes.
Because the volume level of the tone is xed during the Auto Calibration setup, you cannot adjust
the volume using the volume control.
If the ASC microphone is disconnected during the Auto Calibration setup, the setup will be
canceled.
You can also press the ASC button on the remote control to use this function.
If Dolby Pro Logic ||z is set to ON, the selection are in the following sequence :
FL CEN FR SR FHR FHL SL SW.
DRC Setup
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
DRC compresses the audio to make the loudest sounds quieter and the quietest sounds louder.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the buttons to select OPTION, and then press the
ENTER button.
Press the buttons to select DRC, and then press the
ENTER button.
Press the buttons to set the DRC you want.
AUTO : The Dynamic Range Control will be set automatically
based on the information provided by the Dolby TrueHD
Soundtrack.
MIN : Sets DRC effect to minimum.
STD : Sets DRC effect to standard.
MAX : Sets DRC effect to maximum.
Dual Mono Setup
Dual mono programs have two independent mono channels.
You can use this function when dual mono programs are played.
When you use this function, select audio channels CH1, CH2 or both Channel.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the buttons to select OPTION, and then press the
ENTER button.
Press the buttons to select DUAL MONO, and then press
the ENTER button.
Press the buttons to select the DUAL MONO option you
want.
CH1 : Channel 1 is heard only.
CH2 : Channel 2 is heard only.
BOTH : Both channels are heard from front speakers.
1.
2.
3.
4.
1.
2.
3.
4.
HW-D600_D650S_XAA_0616.indd 45 2011-06-16 10:28:01
46 English
Setup HDMI Setup
Use this if you want to receive audio from HDMI connected external devices.
Press the SETUP/MENU button on the remote control.
Each time the button is pressed, the mode switches between
INPUT and SETUP OFF.
Press the buttons to select OPTION, and then press the
ENTER button.
Press the buttons to select HDMI SETUP, and then press
the ENTER button.
Press the buttons to set the HDMI Setup mode you want,
and then press the ENTER button.
Press the buttons to set you want.
AUTO SYNC : ON, OFF
The AV receiver can be set to automatically correct any delay
between the video and the audio, based on the data from the
connected TV.
- ON : HDMI Sync is enabled.
- OFF : HDMI Sync is disabled.
HDMI AUDIO : AVR(Audio Video Receiver), TV
This preference determines whether audio received at the HDMI IN is output by the HDMI OUT.
If you want to listen to audio from an HDMI connected external device through your HDMI
connected TV's speakers, set it to TV. Otherwise, leave it on AVR to listen to audio from the A/V
receiver.
- AVR : HDMI audio is not output - TV : HDMI audio is output
HDMI ANYNET+ : ON, OFF
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung
TV's remote control.
- ON : Anynet+ is enabled.
- OFF : Anynet+ is disabled.
ARC : AUTO , OFF
If you use the HDMI cable to connect between HDMI IN of an Audio Return Channel-compliant
TV and HDMI OUT (ARC) of the main unit, you can listen to the TV sound through the main unit
connected speaker without the further connection.
- AUTO : The audio signal from the TV can be sent to the HDMI OUT of the main unit.
- OFF : Turn TV ARC funtion off.
NOTE HDMI Audio is enabled only if both the HDMI INPUT and HDMI OUT are connected properly and
working normally.
HDMI Sync function works only if your HDMI compatible TV supports this function.
If HDMI ANYNET+ is set to OFF, TV ARC will be set to OFF accordingly that cannot switch to
AUTO.
The ARC function will be active only via the HDMI OUT terminal.
1.
2.
3.
4.
5.
HW-D600_D650S_XAA_0616.indd 46 2011-06-16 10:28:02
English 47
04 O
peration
Operation
Using the Surround Modes
Using the AUDIO EFFECT Button On the Front of the Main Unit
Selecting the DPLIIx mode
Press the AUDIO EFFECT button to select DPLIIx mode.
Each time you press this button, 3D SOUND will be selected in turn.
Press the <, > button.
Each time you press the <, > button, MUSIC GAME MATRIX PL PL OFF MOVIE will be selected in turn.
If you turn Dolby Pro Logic IIz on, HEIGHT PL OFF will be selected in turn.
You can also select the DPLIIx mode by pressing the PROLOGIC button on the remote control.
Selecting the NEO:6 mode
Press the AUDIO EFFECT button brie y to select NEO:6 mode.
Each time you press this button, 3D SOUND will be selected in turn.
Press the <, > button.
Each time you press the <, > button, MUSIC CINEMA OFF will be selected in turn.
You can also select the NEO:6 mode by pressing the NEO : 6 button on the remote control.
Selecting the DSP mode
Press the AUDIO EFFECT button to select DSP mode.
Each time you press this button, 3D SOUND will be selected in turn.
Press the <, > button.
Each time you press the <, > button, STEREO HALL 1 HALL 2 J.CLUB CHURCH ROCK CLASSIC LIVE GAME MOVIE CONCERT STADIUM will be selected in turn.
You can also select the DSP mode by pressing the DSP button on the remote control.
Selecting the 3D SOUND mode
Press the AUDIO EFFECT button to select 3D SOUND mode.
Each time you press this button, 3D SOUND will be selected in turn.
Press the <, > button.
Each time you press the <, > button, 3D SOUND ON 3D SOUND OFF will be selected in turn.
You can also select the 3D SOUND mode by pressing the 3D SOUND button on the remote control.
NOTE The 3D sound effect will not be available for Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD High Resolution Audio. You cannot use Dolby Pro Logic llx mode for Analog multi channel signals, LPCM multi channel signals from HDMI, Dolby TrueHD, Dolby Digital Plus, DTS-HD Master Audio and DTS-HD High Resolution Audio. Pro Logic works with the audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. The 3D sound effect will not be available for FM.
1.
2.
1.
2.
1.
2.
1.
2.
HW-D600_D650S_XAA_0616.indd 47 2011-06-16 10:28:02
48 English
Operation Using the S.DIRECT Button Output the original signal as it is without applying the sound eld effect or any other sound effect.
Press the S.DIRECT button.
NOTE The screen will display DIRECT instead of S.DIRECT.
Input Signal and Surround Chart o = active, = inactive
Input Signal Surround Mode Output Channel Display Information
L/R C SL SR
SBL SBR
SUBW Signal Format Channel Status
Dolby Digital Dolby Digital O O O O Digital + Dolby Digital L, C, R, SL, SR, SW
Dolby Digitital EX
Dolby Digital EX O O O O O Digital +Dolby Digital EX L, C, R, SL, SR ,SBL, SBR, SW
Dolby Digital + ProLogic IIx O O O O O Digital + Dolby Digital + ProLogic IIx L, C, R, SL, SR ,SBL, SBR, SW
Dolby Digital + ProLogic IIz O O O O (Height) O Digital + Dolby Digital + ProLogic IIz L, C, R, SL, SR, H, SW
Dolby Digital Plus Dolby Digital Plus O O O O O Digital + Dolby Digital Plus L, C, R, SL, SR ,SBL, SBR, SW
Dolby TrueHD Dolby TrueHD O O O O O Dolby TrueHD L, C, R, SL, SR ,SBL, SBR, SW
DTS (5.1-ch) DTS Surround O O O O DTS L, C, R, SL, SR, SW
DTS-ES DTS Digital + ProLogic IIx O O O O O DTS + ProLogic IIx L, C, R, SL, SR ,SBL, SBR, SW
DTS 96/24
DTS Digital + ProLogic IIz O O O O (Height) O DTS + ProLogic IIz L, C, R, SL, SR ,SBL, SBR, SW
DTS-ES O O O O O DTS ES L, C, R, SL, SR ,SBL, SBR, SW
DTS 96/24 O O O O DTS 96/24 L, C, R, SL, SR, SW
DTS-HD DTS-HD Master Audio O O O O O DTS-HD MSTR L, C, R, SL, SR ,SBL, SBR, SW
DTS-HD High Resolution O O O O O DTS-HD L, C, R, SL, SR, SBL, SBR, SW
LPCM Multi-Channel Multi-Channel O O O O O Digital + LPCM L, C, R, SL, SR, SBL, SBR, SW
Multi-Channel O O O O (Height) O Digital + LPCM L, C, R, SL, SR, H, SW
2-ch PCM
Stereo O O Digital + LPCM L, R, SW
ProLogic IIx O O O O O Digital + LPCM + Dolby Digital + ProLogic IIx
L, C, R, SL, SR ,SBL, SBR, SW
ProLogic IIz O O O O (Height) O Digital + LPCM + Dolby Digital + ProLogic IIz
L, C, R, SL, SR, H, SW
NEO:6 O O O O O Digital + LPCM + DTS + NEO:6 L, C, R, SL, SR ,SBL, SBR, SW
SFE O O O O O Digital + LPCM + LIVE SURR L, C, R, SL, SR ,SBL, SBR, SW
Analog 2-ch
Stereo O O Analog L, R, SW
ProLogic IIx O O O O O Analog + Dolby Digital + ProLogic IIx L, C, R, SL, SR ,SBL, SBR, SW
ProLogic IIz O O O O (Height) O Analog + Dolby Digital + ProLogic IIz L, C, R, SL, SR, H, SW
NEO:6 O O O O O Analog + DTS NEO:6 L, C, R, SL, SR ,SBL, SBR, SW
SFE O O O O O Analog + LIVE SURR L, C, R, SL, SR ,SBL, SBR, SW
L/R : front speaker (left/right)
C : center speaker
SL/SR : surround speaker (left/right)
SBL/SBR : surround back speaker (left/right)
H = FHL/FHR : front height speaker (left/right)
SW : subwoofer
LIVE SURR : LIVE SURROUND
HW-D600_D650S_XAA_0616.indd 48 2011-06-16 10:28:03
English 49
04 O
peration
NOTE Channel status displays are dependent on the speaker con guration.
SFE mode works with 2-ch signals.
If Dolby Pro Logic IIz is set to On, the Surround Back speaker(SBL/SBR) is changed to the Front
Height Speaker(FHL/FHR), Dolby true HD, Dolby plus, DTS-HD Audio ,SFE and NE0:6 will be
output 5.1 channel.
ProLogic IIx and ProLogic IIz works only audio signals with sampling frequencies of 32KHz,
44KHz or 48KHz.
Using the SUBWOOFER button
You can set the subwoofer Level.
Press the SUBWOOFER button.
Press the buttons to select Subwoofer LEVEL under the
Display with S.W. (The display disappears automatically.)
- Setting the Subwoofer Level- SW (Subwoofer) : -10 ~ +10dB
Listening to the Radio
You can listen to the radio by using either automatic or manual tuning.
Press the INPUT SELECT button on the remote control to select FM.
Select a frequency (radio broadcast).
Preset tuning :
Press the #,$ buttons on the remote control to select the preset frequency.
Manual tuning 1 (Automatic tuning):
Press and hold the TUNING/CH ( ., ) buttons on the remote control to automatically tune in
a frequency.
Manual tuning 2 :
Press the TUNING/CH ( ., ) buttons on the remote control to increase or decrease the
frequency step by step.
NOTE You can also use the SELECT (., ) button on the main uint to change the radio frequency.
1.
2.
1.
2.
HW-D600_D650S_XAA_0616.indd 49 2011-06-16 10:28:03
50 English
Operation To Listen in Mono/Stereo
Press the MO/ST button on the remote control.
Each time you press this button, STEREO or MONO will be selected in turn.
If you select MONO in an area with weak reception, it will help to reduce noise.
This function works only with the remote control.
Presetting Radio Stations
You can preset up to 15 FM stations.
E.g.: Setting station FM 89.10 in preset 2.
Press the INPUT SELECT button on the remote control to
select FM.
Press the TUNING/CH ( ., ) buttons on the remote control
to select 89.10.
Refer to step 2 above to tune in automatically and manually.
Press the TUNER MEMORY button on the main unit.
You can also use the TUNER MEMORY button on the
remote control.
Tuner number will blink on the display.
Press the TUNING/CH ( ., ) buttons on the remote control
to select preset 2.
You can select from presets 1 to 15.
Press the TUNER MEMORY button on the main unit.
Tuner number will disappear and station 89.10 will be saved
in preset 2.
To preset other stations, repeat steps 2 to 5.
To Listen to Preset Station Press the TUNING MODE button to select PRESET and press the SELECT ( ., ) buttons.
1.
2.
3.
4.
5.
6.
HW-D600_D650S_XAA_0616.indd 50 2011-06-16 10:28:03
English 51
04 O
peration
Using an iPod
You can enjoy playback of your iPod using the supplied remote control.
Listening to Music (iPod audio function) You can play music les stored in the iPod player by connecting it to the AV receiver.
Connect the iPod dock connector to the iPod jack on the AV Receiver.
Place the iPod in the dock.
Your iPod is automatically turned on.
Press the INPUT SELECT button on the remote control to select IPOD AUDIO mode.
Press the PLAY button on the remote control to play.
The AV receiver starts playing from the rst track of the iPod player.
You can use the remote control to control simple playback functions such as the PLAY, PAUSE,
STOP, SKIP (#,$) buttons.
NOTE See page 27 for compatible iPods.
Compatibility depends on the software version of your iPod.
You can also select iPod by pressing the iPod button on the remote control.
Watching a Movie (iPod video function)
You can play video les stored in the iPod player on a TV by
connecting it to the AV receiver.
Connect the iPod dock connector to the iPod jack on the AV receiver.
In the iPod screen, move to Videos > Settings and set the TV Out option to On.
Place the iPod in the dock.
Press the INPUT SELECT button on the remote control to select IPOD VIDEO mode.
Set the AV IN option of the TV connected to the AV receiver to COMPOSITE.
Follow the iPod onscreen guide through the following steps.
Press the , buttons on the remote control to select Videos and press the ENTER button.
Press the , buttons on the remote control to select Movies and press the ENTER button.
1. 2.
3.
4.
5.
1.
2.
3. 4.
5.
6.
7.
HW-D600_D650S_XAA_0616.indd 51 2011-06-16 10:28:03
52 English
Operation Press the , buttons to select the le to play and press the ENTER button.
The iPod's video les will be played on the TV screen.
You can use the remote control to control simple playback
functions such as the PLAY, PAUSE, STOP, SKIP (#,$) buttons.
If you press the PREV button after the playback, the player will
move to the start screen of the current le.
Press the STOP button to stop playing and return to the list screen.
Press the RETURN button to return to the previous menu.
NOTE Before you can play the video les in the iPod player, you must connect the Audio/Video terminals
of the TV to the receiver using the Composite (A/V) cable.
See page 27 for compatible iPods.
Compatibility depends on the software version of your iPod.
When the current le is played to the end, the next le will not be played automatically.
To play the next le, select a le to play in the list screen of the iPod player.
No other screen than the playback one will appear on the TV screen. Check other screens on the
iPod player.
Convenient Functions
Sleep Timer Function
You can set the time that this unit will shut itself off.
Press the SLEEP button.
SLEEP : OFF 10M 20M 30M 60M 90M 120M
150M will be selected in turn.
To check sleep timer
Press the SLEEP button.
The remaining time before this unit will shut itself off is shown on the
display.
Pressing the button again changes the sleep time from what you set
previously.
To cancle sleep timer
Press the SLEEP button until SLEEP OFF appears on the display.
8.
9.
HW-D600_D650S_XAA_0616.indd 52 2011-06-16 10:28:04
English 53
04 O
peration
Mute Function
This function is useful when answering a doorbell or telephone call.
Press the MUTE button.
MUTE appears on the display.
To output sound again
Press the MUTE button again or press the Volume button.
MUTE will disappear and sound will output.
Adjust the Display
You can adjust the brightness of the display.
Press the DIMMER button.
Each time you press this button, the brightness changes as follows :
Dark Bright.
NOTE SLEEP, Mute and the Adjust Display functions can only be
operated with the remote control.
Reset Function
When the Power is on,
Press the MUTE button.
MUTE appears on the display.
Press the 2 button ve times and then press the ENTER button.
INITIAL : NO appears on the display.
Press the buttons to select YES.
The unit will turn off after 5 seconds.
When the Power is Off,
Press and hold the TUNER MEMORY button on the front of your AV Receiver for longer than 5 seconds.
POWER LED will blink one time.
NOTE Using the RESET function will erase all stored settings.
Do not use this unless necessary.
1.
2.
3.
1.
HW-D600_D650S_XAA_0616.indd 53 2011-06-16 10:28:05
54 English
Operation Using Headphones
Use headphones (not supplied) for private listening pleasure.
Connect the headphones to the headphone (PHONES) jack and listen to music.
NOTE Do not turn the volume up too high when you use headphones as it may damage your hearing.
Software Upgrade
Samsung may offer upgrades for AV Receiver's rmware in the future.
Please visit Samsung.com or contact the Samsung call center at
1-800-SAMSUNG (726-7864) to receive information about
downloading upgrades and using a USB drive. Upgrades will be
possible by connecting a USB drive to the USB port located on your
AV Receiver.
NOTE Insert a USB drive containing the rmware upgrade into the USB
port on the back of the main unit.
Please be careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The main unit will turn off
automatically after completing the rmware upgrade.
When software is upgraded, settings you have made will return to
their default (factory) settings. We recommend you write down your
settings so that you can easily reset them after the upgrade.
If you failed software upgrade, it is strongly recommended whole USB data format to FAT16 and
retry software upgrade.
The NTFS USB File System can not be supported.
Depending on the manufacturer, the USB may not be supported.
ONLY FOR SERVICE
ONLY FOR UPDATE
HW-D600_D650S_XAA_0616.indd 54 2011-06-16 10:28:06
English 55
05 M
iscellaneous
Operating your TV with the Remote Control
Press the POWER button to turn on the TV.
Press the TV button to set the remote to TV mode.
Point the remote control toward the TV.
While holding down the POWER button, enter the code corresponding to your brand of TV.
If there is more than one code listed for your TV in the table, enter one at a time to determine
which code works.
If the code matches the TV's code, the TV will be turned off.
If TV is turned on or off when you press the POWER button of the remote control, the setting is
completed.
You can use the TV POWER, VOLUME, CHANNEL, MENU and Numeric buttons (0~9).
NOTE The remote control may not work on some brands of TVs. Also, some operations may not be
possible depending on your brand of TV.
The remote control will work with Samsung TVs by default.
1.
2. 3.
4.
5.
TV Brand Code List
Brand Code Admiral (M.Wards) 56, 57, 58
A Mark 01, 15
Anam 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 13, 14
AOC 01, 18, 40, 48
Bell & Howell (M.Wards) 57, 58, 81
Brocsonic 59, 60
Candle 18
Cetronic 03
Citizen 03, 18, 25
Cinema 97
Classic 03
Concerto 18
Contec 46
Coronado 15
Craig 03, 05, 61, 82, 83, 84
Croslex 62
Crown 03
Curtis Mates 59, 61, 63
CXC 03
Daewoo 02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29,
30, 32, 34, 35, 36, 48, 59, 90
Daytron 40
Dynasty 03
Emerson 03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85
Fisher 19, 65
Funai 03
Futuretech 03
General Electric (GE) 06, 40, 56, 59, 66, 67, 68
Hall Mark 40
Brand Code Realistic 03, 19
Sampo 40
Samsung 00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60, 98
Sanyo 19, 61, 65
Scott 03, 40, 60, 61
Sears 15, 18, 19
Sharp 15, 57, 64
Signature 2000 (M.Wards) 57, 58
Sony 50, 51, 52, 53, 55
Soundesign 03, 40
Spectricon 01
SSS 18
Sylvania 18, 40, 48, 54, 59, 60, 62
Symphonic 61, 95, 96
Tatung 06
Techwood 18
Teknika 03, 15, 18, 25
TMK 18, 40
Toshiba 19, 57, 63, 71
Vidtech 18
Videch 59, 60, 69
Wards 15, 17, 18, 40, 48, 54, 60, 64
Yamaha 18
York 40
Yupiteru 03
Zenith 58, 79
Zonda 01
Dongyang 03, 54
Brand Code Hitachi 15, 18, 50, 59, 69
Inkel 45
JC Penny 56, 59, 67, 86
JVC 70
KTV 59, 61, 87, 88
KEC 03, 15, 40
KMC 15
LG (Goldstar) 01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44
Luxman 18
LXI (Sears) 19, 54, 56, 59, 60, 62, 63, 65, 71
Magnavox 15, 17, 18, 48, 54, 59, 60, 62, 72, 89
Marantz 40, 54
Matsui 54
MGA 18, 40
Mitsubishi/ MGA 18, 40, 59, 60, 75
MTC 18
NEC 18, 19, 20, 40, 59, 60
Nikei 03
Onking 03
Onwa 03
Panasonic 06, 07, 08, 09, 54, 66, 67, 73, 74
Penney 18
Philco 03, 15, 17, 18, 48, 54, 59, 62, 69, 90
Philips 15, 17, 18, 40, 48, 54, 62, 72
Pioneer 63, 66, 80, 91
Portland 15, 18, 59
Proton 40
Quasar 06, 66, 67
Radio Shack 17, 48, 56, 60, 61, 75
RCA/Proscan 18, 59, 67, 76, 77, 78, 92, 93, 94
Miscellaneous
HW-D600_D650S_XAA_0616.indd 55 2011-06-16 10:28:07
56 English
Miscellaneous
Operating your DVD or BD Player with the Remote Control
Press the POWER button to turn on the DVD (BD) player.
Press the BD/DVD button on the remote control to set the remote to DVD (BD) mode.
Point the remote control toward the DVD (BD).
While holding down POWER button, enter the code corresponding to your brand of DVD (BD).
If there is more than one code listed for your DVD (BD) in the table, enter one at a time to
determine which code works.
If the code matches the DVD (BD)'s code, the DVD (BD) will be turned off.
If DVD (BD) is turned on or off when you press the POWER button of the remote controller, the
setting is completed.
You can use DVD (BD) POWER, PLAY, PAUSE, STOP, SKIP, MENU and Numeric buttons
(0~9).
NOTE The remote control may not work on some brands of DVD.
Also, some operations may not be possible depending on your brand of DVD.
The remote control will work with Samsung DVD (BD) by default.
DVD Brand Code List
Brand Code Number Brand Code Number Brand Code Number DENON 003, 032 ONKYO 004, 014 TOSHIBA 004, 018 DOONOON 019 OPTIMUS 011 YAMAHA 009, 033 DMTECH 017 PANASONIC 021 ZENITH 004, 024 FISHER 002 PROSCAN 006 TAEGWANG 026 GE 006 PHILIPS 004, 023 PS2 028 HARMAN/KARDON 012 PIONEER 007, 011, 022, 025 X-BOX 029 JVC 010, 013 RCA 006 APEX 030 KENWOOD 008 SAMSUNG 000, 027 Marantz 031 LG 001 SANYO 002 MAGNAVOX 004 SONY 015, 020 MITSUBISHI 005, 016 THETA DIGITAL 011
BD Player Brand Code List
Brand Code Number SAMSUNG 000, 001, 002, 003, 004
NOTE The remote control will control Samsung BD players only.
1.
2.
3.
4.
5.
HW-D600_D650S_XAA_0616.indd 56 2011-06-16 10:28:08
English 57
06 O
ther Inform ation
Other Information Troubleshooting
Before requesting service, please check the following.
Symptom Check Remedy
The unit will not turn on. Is the power cord plugged into the outlet?
Connect the power plug to the outlet.
A function does not work when the button is pressed.
Is there static electricity in the air? Disconnect the power plug and connect it again.
Sound is not produced. Are the speakers and external components connected properly?
Is the Mute function on? Is the volume set to minimum? Is the Speaker Size set incorrectly
to NONE?
Connect them correctly. Press the MUTE button to
cancel the function. Adjust the volume. Refer to pages 35 to select
LARGE, SMALL or YES.
Picture does not appear on a TV when the function is selected.
Is the external component connected properly?
Connect it correctly.
Remote controller does not work.
Are the batteries drained? Is the distance between remote
control and main unit too great?
Replace with new batteries. Operate at close distance.
The sound from the left/ right channels is reversed.
Are the left/right speaker or left/right input/output cables connected properly?
Check the left/right channel and connect it/them correctly.
Can't receive radio broadcasts.
Is FM antenna connected properly?
Connect the antenna correctly. If the input strength of antenna
signal is weak, install the FM antenna in a place with good reception.
There is no sound from surround speakers.
Are the surround speakers connected properly?
Is SURR (surround) incorrectly set to NONE in the Speaker Size?
Is surround mode set to stereo?
Refer to page 17 to connect them properly.
Refer to page 35 to select LARGE or SMALL.
Refer to pages 47 ~ 49 to select proper Surround Mode.
There is no sound from surround back speakers
Are the surround back speakers connected properly?
Is SBACK (Surround Back) set to NONE in the Speaker Size?
Is Surround Mode set to EX/ES?
Refer to page 17 to connect them properly.
Refer to page 35 to select LARGE or SMALL.
Refer to page 41 to set Surround Mode to EX/ES.
Can't select EX/ES mode.
Is SBACK (Surround Back) set to NONE in the Speaker Size?
Is the input signal selected properly?
Refer to page 35 to select LARGE or SMALL.
Use a 7.1 channel external component.
HW-D600_D650S_XAA_0616.indd 57 2011-06-16 10:28:08
58 English
Other Information
Symptom Check Remedy
Can't select Dolby Pro Logic llx mode.
Is the input signal selected properly?
Only 2 channel signal can select Dolby Pro Logic IIx mode. (ex:Dolby Digital, PCM, 2 channel analog input signal.)
Can't select NEO:6 mode.
Is the input signal selected properly?
Use PCM and Analog input signal.
There is no sound when playing a DTS encoded DVD.
Is Digital input selected? Check whether the DVD player is properly connected and refer to page 30 to select the digital input.
Product Protection Function
Heat protection
The protection function will come on if the main unit or power transformer overheats.
" " will appear in the display .
This function will come on :
- If speaker terminal is shorted
- If speaker cable is shorted
If there is no problem when you turn the unit on again after turning it off, PROTECTION mark will
disappear on the display and the unit will work properly.
Auto Calibration Error List
Error No. Auto Calibration Error Message on OSD E02 NO MIC Connect the calibration microphone.
E03 NOISY Keep quiet during the measurement.
E04 MIC LEVL The speaker are too close to the microphone. Install all speakers and the calibration microphone at the proper location.
E05 NO FRONT Connect the front speaker correctly.
E07 LEVL OVR Install all speakers and the calibration microphone at the proper location.
E08 DIST OVR Some speakers are too far from calibration microphone. Install all speakers and the calibration microphone at the proper location.
E13 TIME OVR Unplug and re-plug the power cable. Then, perfrom the measurement again.
E14 CODE ERR Unplug and re-plug the power cable. Then, perfrom the measurement again.
HW-D600_D650S_XAA_0616.indd 58 2011-06-16 10:28:08
English 59
06 O
ther Inform ation
Speci cations
* S/N Ratio, Distortion, Separation and Usable sensitivity are based on measurement using AES (Audio
Engineering Society) guidelines.
- Samsung Electronics Co., Ltd reserves the right to change the speci cations without notice.
- Weight and dimensions are approximate.
- Design and speci cations are subject to change without prior notice.
GENERAL
Power supply 120V, 60 Hz
Standby power consumption 0.9W
Power consumption Main unit 75W
Subwoofer 35W
Weight 13.67 Ibs
Dimensions (W x H x D) 16.9 x 6.5 x 14.2 inches
Operating temperature range 41F~+95F
Operating humidity range 10%~75%
FM TUNER
Frequency response 87.5~108.0MHz
Usable sensitivity 12dBf
S/N ratio MONO/STEREO 55/55dB
Distortion MONO/STEREO 0.3/0.8%
Stereo separation 30dB
Tuner output level 1kHz, 75kHz Dev
AMPLIFIER
Rated output 20Hz~20kHz/THD = 0.9%
Front speaker (left+right) 6 100W/CH
Center speaker 6 100W/CH
Surround speaker (left+right) 6 100W/CH
Subwoofer speaker 6 100W/CH
Input sensitivity/impedance 450mV/47k
S/N ratio (analog input) 80dB
Separation (1kHz) 60dB
FREQUENCY RESPONSE
Analog input 20Hz~20kHz(3dB)
Digital input/96kHz PCM 20Hz ~44kHz(3dB)
HDMI Input Compatible 1080p
Output Compatible 1080p
VIDEO OUTPUT
TV format NTSC/PAL
Input level/impedance 1Vp-p/75
Output level/impedance 1Vp-p/75
Video frequency response 5Hz to 10kHz(-3dB)
S/N Ratio 60dB
HW-D600_D650S_XAA_0616.indd 59 2011-06-16 10:28:08
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
One (1) Year Parts and Labor* (*90 days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG's obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an AS IS basis. Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASERS PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG at:
Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park, NJ07660-0511
1-800-SAMSUNG(726-7864) and www.samsung.com
LIMITED WARRANTY TO ORIGINAL PURCHASER
SAMSUNG AV receiver
HW-D600_D650S_XAA_0616.indd 60 2011-06-16 10:28:08
Area Contact Center Web Site ` North America Canada 1-800-SAMSUNG (726-7864) www.samsung.com
Mexico 01-800-SAMSUNG (726-7864) www.samsung.com
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com
` Latin America Argentine 0800-333-3733 www.samsung.com
Brazil 0800-124-421 / 4004-0000 www.samsung.com
Chile 800-SAMSUNG (726-7864) www.samsung.com
Colombia 01-8000112112 www.samsung.com
Costa Rica 0-800-507-7267 www.samsung.com
Dominica 1-800-751-2676 www.samsung.com
Ecuador 1-800-10-7267 www.samsung.com
El Salvador 800-6225 www.samsung.com
Guatemala 1-800-299-0013 www.samsung.com
Honduras 800-7919267 www.samsung.com
Jamaica 1-800-234-7267 www.samsung.com
Nicaragua 00-1800-5077267 www.samsung.com
Panama 800-7267 www.samsung.com
Peru 0-800-777-08 www.samsung.com
Puerto Rico 1-800-682-3180 www.samsung.com
Trinidad & Tobago
1-800-SAMSUNG (726-7864) www.samsung.com
Venezuela 0-800-100-5303 www.samsung.com
` Europe Albania 42 27 5755 -
Austria 0810 - SAMSUNG (7267864, 0.07/min)
www.samsung.com
Belgium 02-201-24-18
www.samsung.com/ be (Dutch) www.samsung.com/ be_fr (French)
Bosnia 05 133 1999 -
Bulgaria 07001 33 11 www.samsung.com
Croatia 062 SAMSUNG (062 726 7864) www.samsung.com
Czech
800-SAMSUNG (800-726786)
www.samsung.comSamsung Zrt., esk organizan sloka, Oasis Florenc, Soko- lovsk394/17, 180 00, Praha 8
Denmark 70 70 19 70 www.samsung.com
Finland 030 - 6227 515 www.samsung.com
France 01 48 63 00 00 www.samsung.com
Germany 01805 - SAMSUNG (726-7864 0,14/Min)
www.samsung.com
Hungary 06-80-SAMSUNG (726-7864) www.samsung.com
Italia 800-SAMSUNG (726-7864) www.samsung.com
Kosovo +381 0113216899 -
Luxemburg 261 03 710 www.samsung.com
Macedonia 023 207 777 -
Montenegro 020 405 888 -
Netherlands 0900-SAMSUNG (0900-7267864) ( 0,10/Min)
www.samsung.com
Norway 815-56 480 www.samsung.com
Poland 0 801 1SAMSUNG (172678) / 022-607-93-33
www.samsung.com
Portugal 80820-SAMSUNG (726-7864) www.samsung.com
Rumania
1. 08010 SAMSUNG (72678) - doar din reeaua Romtelecom, tarif local
2. 021.206.01.10 - din orice reea, tarif normal
www.samsung.com
Area Contact Center Web Site
Serbia 0700 Samsung (0700 726 7864)
www.samsung.com
Slovakia 0800-SAMSUNG (726-7864) www.samsung.com
Spain 902-1-SAMSUNG (902 172 678) www.samsung.com
Sweden 0771 726 7864 (SAMSUNG) www.samsung.com
Switzerland 0848-SAMSUNG (7267864, CHF 0.08/min)
www.samsung.com/ch www.samsung.com/ ch_fr/(French)
U.K 0330 SAMSUNG (7267864) www.samsung.com
Eire 0818 717100 www.samsung.com
Lithuania 8-800-77777 www.samsung.com
Latvia 8000-7267 www.samsung.com
Estonia 800-7267 www.samsung.com
` CIS Russia 8-800-555-55-55 www.samsung.com
Georgia 8-800-555-555 -
Armenia 0-800-05-555 -
Azerbaijan 088-55-55-555 -
Kazakhstan 8-10-800-500-55-500 (GSM: 7799)
www.samsung.com
Uzbekistan 8-10-800-500-55-500 www.samsung.com
Kyrgyzstan 00-800-500-55-500 www.samsung.com
Tadjikistan 8-10-800-500-55-500 www.samsung.com
Ukraine 0-800-502-000 www.samsung.ua www.samsung.com/ ua_ru
Belarus 810-800-500-55-500 -
Moldova 00-800-500-55-500 -
` Asia Paci c Australia 1300 362 603 www.samsung.com
New Zealand 0800 SAMSUNG (0800 726 786) www.samsung.com
China 400-810-5858 / 010-6475 1880 www.samsung.com
Hong Kong (852) 3698 4698 www.samsung.com/hk www.samsung.com/ hk_en/
India 3030 8282 / 1800 110011 / 1800 3000 8282 / 1800 266 8282
www.samsung.com
Indonesia 0800-112-8888 / 021-5699-7777
www.samsung.com
Japan 0120-327-527 www.samsung.com
Malaysia 1800-88-9999 www.samsung.com
Philippines
1-800-10-SAMSUNG(726-7864) / 1-800-3-SAMSUNG(726-7864) / 1-800-8-SAMSUNG(726-7864) / 02-5805777
www.samsung.com
Singapore 1800-SAMSUNG (726-7864) www.samsung.com
Thailand 1800-29-3232 / 02-689-3232 www.samsung.com
Taiwan 0800-329-999 www.samsung.com
Vietnam 1 800 588 889 www.samsung.com
` Middle East Bahrain 8000-4726 www.samsung.com
Egypt 08000-726786 www.samsung.com
Jordan 800-22273 www.samsung.com
Morocco 080 100 2255 www.samsung.com
Oman 800-SAMSUNG (726-7864) www.samsung.com
Saudi Arabia 9200-21230 www.samsung.com
Turkey 444 77 11 www.samsung.com
U.A.E 800-SAMSUNG (726-7864) www.samsung.com
` Africa Nigeria 0800-SAMSUNG (726-7864) www.samsung.com
South Africa 0860-SAMSUNG (726-7864 ) www.samsung.com
Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
HW-D600_D650S_XAA_0616.indd 61 2011-06-16 10:28:09
QUESTIONS OR COMMENTS?
COUNTRY CALL OR VISIT US ONLINE AT WRITE
IN THE US 1-800-SAMSUNG
(7267864) www.samsung.com/us
Samsung Electronics America, Inc.
85 Challenger Road Ridge eld Park,
NJ 07660-21
Related manuals for Samsung HW-D600 Receiver User Manual
Manualsnet FAQs
If you want to find out how the HW-D600 Samsung works, you can view and download the Samsung HW-D600 Receiver User Manual on the Manualsnet website.
Yes, we have the User Manual for Samsung HW-D600 as well as other Samsung manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User Manual should include all the details that are needed to use a Samsung HW-D600. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Samsung HW-D600 Receiver User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Samsung HW-D600 Receiver User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Samsung HW-D600 Receiver User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Samsung HW-D600 Receiver User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Samsung HW-D600 Receiver User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.