Contents

Samsung A750X Series Monitor User Manual PDF

1 of 94
1 of 94

Summary of Content for Samsung A750X Series Monitor User Manual PDF

User Manual C23A750X / C27A750X

The color and the appearance may differ depending on the product, and the specifications are subject to

change without prior notice to improve the performance.

BN46-00037F-01

B

efore Using the Product

Copyright

The contents of this manual are subject to change without notice to improve quality.

2011 Samsung Electronics

Samsung Electronics owns the copyright for this manual.

Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is

prohibited.

The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.

Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation.

VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.

Icons used in this manual

Symbols for safety precautions

The following images are for reference only. Real-life situations may differ from what is shown in the images.

Warning A serious or fatal injury may result if instructions are not followed.

Caution Personal injury or damage to properties may result if instructions are not followed.

Activities marked by this symbol are prohibited.

Instructions marked by this symbol must be followed.

2 Before Using the Product

Before Using the Product

Cleaning

Cleaning

Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.

Take the following steps when cleaning.

1. Power off the monitor and computer.

2. Disconnect the power cord from the monitor.

Hold the power cable by the plug and do not touch the cable with wet

hands. Otherwise, an electric shock may result.

3. Wipe the monitor with a clean, soft and dry cloth.

Do not apply a cleaning agent that contains alcohol,

solvent, or surfactant to the monitor.

Do not spray water or detergent directly on the product.

4. Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor.

5. Connect the power cord to the product after cleaning the product.

6. Power on the monitor and computer.

!

!

3 Before Using the Product

Before Using the Product

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper

ventilation. Failing to do so may result in fire or a problem with the product due to an increase in the

internal temperature.

The appearance may differ depending on the product.

Precautions for storage

High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used

nearby.

Be sure to contact Samsung Customer Service Center (page89) if the inside of the monitor needs

cleaning. (service fee will be charged).

Safety Precautions

Electricity and Safety

The following images are for reference only. Real-life situations may differ from what is shown in the

images.

10 cm

10 cm 10 cm

10 cm

10 cm

4 Before Using the Product

Before Using the Product

Warning

Do not use a damaged power cord or plug, or a loose power socket.

An electric shock or fire may result.

Do not plug many products into the same power socket.

Otherwise, the socket may overheat and cause a fire.

Do not touch the power plug with wet hands.

Otherwise, an electric shock may result.

Insert the power plug all the way in so it is not loose.

An unstable connection may cause a fire.

Connect the power plug to a grounded power socket (type 1 insulated devices only).

An electric shock or injury may result.

Do not bend or pull the power cord with force. Do not weigh the power cord down with a heavy object.

A damaged power cord may cause an electric shock or fire.

Do not place the power cord or product near heat sources.

An electric shock or fire may result.

Remove foreign substances such as dust around the plug pins and power socket with a dry cloth.

Otherwise, a fire may result.

!

!

!

5 Before Using the Product

Before Using the Product

Caution

Installation

Warning

Do not unplug the power cord when the product is in use.

The product may become damaged by an electric shock.

Do not use the power cord for products other than authorized products supplied by Samsung.

An electric shock or fire may result.

Keep the power socket where the power cord is connected unobstructed.

If any problem occurs in the product, unplug the power cable to completely

cut the power to the product.

Power to the product cannot be completely cut off with the power button.

Hold the plug when disconnecting the power cord from the power socket.

An electric shock or fire may result.

DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

Otherwise, a fire may result.

Avoid installing the product in a narrow space with bad ventilation, such as a bookshelf or wall closet.

Otherwise, a fire may result due to an increased internal temperature.

Keep the plastic packaging bag for the product in a place that cannot be reached by children.

Children may suffocate.

!

!

!

!

6 Before Using the Product

Before Using the Product

Caution

Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.).

The product may fall and break or cause a personal injury.

Using the product in an area with excess vibration may damage the product

or cause a fire.

Do not install the product in a vehicle or a place exposed to dust, moisture (water drips, etc.), oil, or smoke.

An electric shock or fire may result.

Do not expose the product to direct sunlight, heat, or a hot object such as a stove.

Otherwise, the product lifespan may be reduced, or a fire may result.

Do not install the product within the reach of young children.

The product may fall and injure children.

Take care not to drop the product when moving it.

Otherwise, product failure or personal injury may result.

Do not set down the product on its front.

The screen may become damaged.

When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.

The product may fall and break or cause a personal injury.

Install the product only on cabinets or shelves of the right size.

!

!

7 Before Using the Product

Before Using the Product

Operation

Warning

Put down the product carefully.

The product may fall and break or cause a personal injury.

Installing the product in an unusual place (a place exposed to a lot of fine particles, chemical substances or extreme temperatures, or an airport or train station where the product should operate continuously for an extended period of time) may seriously affect its performance.

Be sure to consult Samsung Customer Service Center (page89) before

installation if you want to install the product at such a place.

High voltage runs through the product. Do not attempt to disassemble, repair, or modify the product on your own.

An electric shock or fire may result.

Contact Samsung Customer Service Center (page89) for repair.

Before you move the product, be sure to turn off the power switch and remove all the cables connected to the product, including the power cord and the antenna cable.

Otherwise, the power cord may be damaged and a fire or electric shock may

result.

If the product generates a strange noise, a burning smell, or smoke, remove the power cord immediately and contact Samsung Customer Service Center (page89).

An electric shock or fire may result.

Do not let children hang from the product or climb on top of it.

The product may fall, and your child may become injured or seriously

harmed.

If the product falls or the exterior is damaged, power off the product, remove the power cord, and contact Samsung Customer Service Center (page89).

Otherwise, an electric shock or fire may result.

!

SAMSUNG

!

!

!

8 Before Using the Product

Before Using the Product

Do not put a heavy object, toy, or sweets on top of the product.

The product or heavy objects may fall as children try to reach for the toy or

sweets resulting in a serious injury.

During a lightning or thunderstorm, remove the power cord and do not touch the antenna cable.

An electric shock or fire may result.

Do not drop objects on the product or apply impact.

An electric shock or fire may result.

Do not move the product by pulling the power cord or any cable.

Otherwise, the power cable may be damaged and product failure, an electric

shock or fire may result.

If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.

Sparks can cause an explosion or fire.

During a lightning or thunderstorm, do not touch the power cord or antenna

cable.

Do not lift or move the product by the power cord or any cable.

Otherwise, the power cable may be damaged and product failure, an electric

shock or fire may result.

Do not use or keep combustible spray or an inflammable substance near the product.

An explosion or fire may result.

Ensure the vents are not blocked by tablecloths or curtains.

Otherwise, a fire may result from an increased internal temperature.

!

!

! GAS

!

9 Before Using the Product

Before Using the Product

Caution

Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable object (paper, match, etc.) into the vent or ports of the product.

If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service

Center (page89).

Product failure, an electric shock or fire may result.

Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.

If water or any foreign substance enters the product, be sure to power off the

product, remove the power cord, and contact Samsung Customer Service

Center (page89).

Product failure, an electric shock or fire may result.

Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.

If you are not going to use the product for an extended period of time,

activate power-saving mode or a moving-picture screen saver.

Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).

Otherwise, a fire may result from accumulated dust, overheating, an electric

shock, or electric leakage.

Use the product at the recommended resolution and frequency.

Your eyesight may deteriorate.

Do not put DC power adapters together.

Otherwise, a fire may result.

Remove the plastic bag from the DC power adapter before you use it.

Otherwise, a fire may result.

100

!

-_-

!

!

10 Before Using the Product

Before Using the Product

Do not let water enter the DC power device or get the device wet.

An electric shock or fire may result.

Avoid using the product outdoors where it can be exposed to rain or snow.

Be careful not to get the DC power adapter wet when you wash the floor.

Do not put the DC power adapter near to any heating apparatus.

Otherwise, a fire may result.

Keep the DC power adapter in a well-ventilated area.

Looking at the screen too close for an extended period of time can deteriorate your eyesight.

Do not hold the monitor upside-down or move it by holding the stand.

The product may fall and break or cause a personal injury.

Do not use humidifiers or stoves around the product.

An electric shock or fire may result.

Rest your eyes for more than 5 minutes for every 1 hour of product use.

Eye fatigue will be relieved.

Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.

Store the small accessories used with the product out of reach of children.

!

!

!

!

11 Before Using the Product

Before Using the Product

Correct posture to use the product

Exercise caution when adjusting the product angle or stand height.

Otherwise, children's fingers or hands may become stuck and injured.

Tilting the product excessively may cause it to fall and result in personal

injury.

Do not place heavy objects on the product.

Product failure or personal injure may result.

!

Use the product in the correct posture as follows:

Straighten your back.

Allow a distance of 45 to 50cm between your eye and the screen, and look slightly

downward at the screen.

Keep your eyes directly in front of the screen.

Adjust the angle so light does not reflect on the screen.

Keep your forearms perpendicular to your upper arms and level with the back of

your hands.

Keep your elbows at about a right angle.

Adjust the height of the product so you can keep your knees bent at 90 degrees or

more, your heels attached to the floor, and your arms lower than your heart.

12 Before Using the Product

Table Of Contents

BEFORE USING THE PRODUCT

2 Copyright 2 Icons used in this manual 2 Symbols for safety precautions

3 Cleaning 3 Cleaning 4 Securing the Installation Space 4 Precautions for storage

4 Safety Precautions 4 Electricity and Safety 6 Installation 8 Operation

12 Correct posture to use the product

PREPARATIONS 18 Checking the Contents 18 Removing the Packaging 19 Checking the Components

21 Parts 21 Frontal Buttons 23 Reverse Side 24 Left Side View 25 Right Side View 26 Adjusting the Product Tilt and Height

USING "CENTRAL STATION"

27 About "Central Station"

27 Software Installation for Using "Central Station"

27 Installing "SAMSUNG Central Station Setup"

28 Connecting the Product to a PC to Use "Central Station"

29 Connecting to a PC via Wireless USB 32 Connecting to a PC via the USB Cable

33 Utilizing "Central Station" 33 Using the Product as a USB HUB 34 Connecting to a LAN

Table Of Contents 13

Table Of Contents

35 Configuring the Central Station Monitor IP

35 Dynamic IP 37 Static IP

39 Notice before your use of Wireless USB or USB Mode

CONNECTING AND USING A SOURCE DEVICE

40 Before Connecting 40 Pre-connection Checkpoints

41 Connecting and Using a PC 41 Connecting to a PC 43 Driver Installation 44 Setting Optimum Resolution 45 Changing the Resolution Using a PC

48 Connecting to a Video Device 48 Connection Using an HDMI Cable

48 Connecting Headphones

SCREEN SETUP 49 MAGIC 49 SAMSUNG MAGIC Angle 50 SAMSUNG MAGIC Bright 51 Configuring SAMSUNG MAGIC Color

52 Brightness 52 Configuring Brightness

53 Contrast 53 Configuring Contrast

53 Sharpness 53 Configuring Sharpness

54 Coarse 54 Adjusting Coarse

55 Fine 55 Adjusting Fine

Table Of Contents 14

Table Of Contents

55 Response Time 55 Configuring Response Time

56 HDMI Black Level

CONFIGURING TINT 57 Red 57 Configuring Red

57 Green 57 Configuring Green

58 Blue 58 Configuring Blue

59 Color Tone 59 Configuring the Color Tone Settings

60 Gamma 60 Configuring Gamma

RESIZING OR RELOCATING THE

SCREEN

61 Auto Adjustment 61 Configuring the Auto Adjustment Settings

61 Size 61 Changing the Picture Size

62 Horizontal Position 62 Configuring H-Position

63 Vertical Position 63 Configuring V-Position

64 Menu H-Position 64 Configuring Menu H-Position

65 Menu V-Position 65 Configuring Menu V-Position

Table Of Contents 15

Table Of Contents

SETUP AND RESET 66 HUB 66 Auto Wireless Detection 66 Wireless Connection 67 USB Connection 68 Analog 68 HDMI 69 USB Super Charging 70 Wireless ID

70 Eco Saving 70 Configuring Eco Saving

71 Menu Transparency 71 Changing Menu Transparency

71 Language 71 Changing the Language

72 PC/AV Mode 72 Configuring PC/AV Mode

73 Auto Source 73 Configuring Auto Source

73 Display Time 73 Configuring Display Time

74 Key Repeat Time 74 Configuring Key Repeat Time

75 Off Timer On/Off 75 Configuring Off Timer On/Off

75 Off Timer Setting 75 Configuring Off Timer Setting

76 Reset 76 Initializing Settings (Reset)

INFORMATION MENU AND OTHERS

77 INFORMATION 77 Displaying INFORMATION

Table Of Contents 16

Table Of Contents

77 Configuring Brightness in the Startup Screen

78 Configuring Volume in the Startup Screen

79 Configuring HUB in the Initial Screen

TROUBLESHOOTING GUIDE

80 Requirements Before Contacting Samsung Customer Service Center

80 Testing the Product 80 Checking the Resolution and Frequency 80 Check the followings.

83 Q & A

SPECIFICATIONS 85 General

86 PowerSaver

87 Standard Signal Mode Table

88 PC Dongle Specification (UWB : Ultra Wide Band)

APPENDIX 89 Contact SAMSUNG WORLDWIDE

91 Terminology

INDEX

Table Of Contents 17

1 P

reparations

1.1 Checking the Contents

1.1.1 Removing the Packaging

1 Open the packaging box. Be careful not to damage the product when you open the packaging with

a sharp instrument.

2 Remove the Styrofoam from the product.

3 Check the components and remove the Styrofoam and plastic bag.

The appearance of actual components may differ from the image shown.

This image is for reference only.

4 Store the box in a dry area so that it can be used when moving the product in the future.

181 Preparations

Preparations1

1.1.2 Checking the Components

Contact the dealer from whom you purchased the product if any item is missing.

The appearance of the components and items sold separately may differ from the image shown.

Components

Components may differ in different locations.

The cleaning cloth is only supplied with the black high-glossy model.

USB gender changer

When the wireless-connection dongle cannot connect to your notebook PC, connect it using the USB

gender changer.

Quick Setup Guide Warranty Card (Not available In some locations)

User Manual

Wireless Connection Dongle Power cable DC power adapter

USB 3.0 cable D-SUB cable HDMI cable (optionally)

Cleaning cloth USB gender changer

191 Preparations

Preparations1

Items sold separately

The following items can be purchased at your nearest retailer.

LAN cable HDMI-DVI cable USB cable

201 Preparations

Preparations1

1.2 Parts

1.2.1 Frontal Buttons

The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.

This is a touch-type button. Tap the button lightly with a finger.

The printed board assembly (PBA) inside this product may heat the stand. A hot stand does not indicate a problem with the product.

If the MENU button is not visible, lightly tap the area around the [ ] button. The MENU button will become visible.

The onscreen display menu only appears when the MENU button light is lit.

The lit MENU button light will automatically turn off after 10 seconds.

211 Preparations

Preparations1

Icons Description

Open or close the onscreen display (OSD) menu, or return to the last

menu.

OSD control lock: Maintain the current settings, or lock the OSD

control to prevent unintended changes to settings.

To lock the OSD control, press the MENU button [ ] for five

seconds.

To unlock the locked OSD control, press the MENU button [ ] for

more than five seconds.

The Brightness and Contrast can be adjusted and Information can be

viewed even when the OSD control is locked.

Open the HUB settings screen (see "HUB" in "7.1 HUB").

To hide the HUB screen, press the [ ] or [ ] button.

Turn the screen on or off.

The power indicator will be lit when the product is operating normally.

Refer to "10.2 PowerSaver" for details about the power-saving function.

To reduce power consumption, it is best to remove the power cable when you will not be using the product for an extended period of time.

Confirm a menu selection.

Pressing the [ ] button when the OSD menu is not displayed will change the input source (Analog/HDMI/Wireless USB/USB). If you power

on the product or change the input source by pressing the [ ] button, a message that shows the changed input source will appear at the top left corner of the screen.

This function is not available with any product that supports an Analog interface only.

If the [ ] button blinks abnormally, there may be a problem in the operation of the fan inside the product. If the problem persists for more than 10 minutes, consult your nearest customer service center.

Move to the upper or lower menu or adjust the value for an option on the OSD menu.

Move to the left or right menu or adjust the value for an option on the OSD menu.

m

m

m

m

221 Preparations

Preparations1

1.2.2 Reverse Side

The color and shape of parts may differ from what is shown. Specifications are subject to change

without notice to improve quality.

Port Description

Connects to a PC using the D-SUB cable.

Connects to a network using the LAN cable.

Connects to a PC via a USB cable.

This port can only connect to a PC.

Connects to the DC power adapter.

231 Preparations

Preparations1

1.2.3 Left Side View

The color and shape of parts may differ from what is shown. Specifications are subject to change

without notice to improve quality.

Port Description

Connects to an audio output device such as headphones.

HDMI IN Connects to a source device using an HDMI cable.

/

Connects to a source device via a USB cable. Compatible with a USB cable version 3.0 or lower.

The USB 3.0 port is blue in color.

If 1 Port is selected for USB Super Charging, only the [ ] port is enabled.

HDMI IN 2 1

2 1

1

241 Preparations

Preparations1

1.2.4 Right Side View

The color and shape of parts may differ from what is shown. Specifications are subject to change

without notice to improve quality.

Port Description

Connects to a source device via a USB cable. Compatible with a USB cable version 2.0 or lower.

The USB 2.0 port is black in color.

251 Preparations

Preparations1

1.2.5 Adjusting the Product Tilt and Height

The color and shape of parts may differ from what is shown. Specifications are subject to change

without notice to improve quality.

The monitor tilt and height can be adjusted.

Hold the top center of the product and adjust the tilt carefully.

10 0

52

30

25

52

261 Preparations

2 U You

sing "Central Station" can use "Central Station" by connecting the product to a PC through the Wireless USB function or a USB

cable. "Central Station" system allows the product to function as a HUB so that you can connect a device

directly to the product to control the device from the product without having to connect the device to a PC.

2.1 About "Central Station"

"Central Station" is a HUB system developed independently by Samsung and allows you to conveniently

control a notebook PC that has a small screen and a limited number of input/output ports available.

Notebook or netbook computers offer portability but may prove inconvenient when used at the office or

at home due to the limited number of functions available. Connecting a notebook PC to this product,

which has the "Central Station" function, allows you to view the small notebook PC screen on a larger

screen. With the HUB function, you can control multiple devices at the same time from the notebook PC,

even if the notebook PC has a limited number of input/output ports.

In particular, the high-tech Wireless USB feature allows you to connect a notebook PC to the product

wirelessly and, from the product, enjoy various multimedia contents stored on the notebook PC.

You can also use triple monitors by configuring the display settings.

2.2 Software Installation for Using "Central Station"

Install on your PC the software provided with the product.

To maximize the performance of your Central Station monitor, visit www.samsung.com and upgrade the

driver periodically.

2.2.1 Installing "SAMSUNG Central Station Setup"

This software is needed to use the Central Station function. Software installation may be affected by the

graphics card, motherboard, or network conditions of the PC.

1 Insert the installation CD into the CD-ROM drive.

2 Click the "SAMSUNG Central Station Setup" installation program.

3 Follow the instructions given on the screen to proceed with installation.

Select the country where you will use the product when installing the driver initially. Using the

product in a country other than the selected country would be contrary to the law.

If a software installation window does not appear in the main screen, install using the "SAMSUNG

Central Station Setup > CA750X_Central_Station.exe" execution file on the CD-ROM.

272 Using "Central Station"

Using "Central Station"2

4 After installing the integrated PC driver "Samsung Central Station Setup," customize the audio

output port settings as required.

(Control Panel->Audio->Speaker->Speaker Setup)

"SAMSUNG Central Station Setup" software consists of "Samsung Wireless Central Station" and "Samsung Wireless Monitor". To delete the software, go to Start Settings Control Panel and double-click Add or Remove Programs on the PC. Select "Samsung Wireless Central Station" and "Samsung Wireless Monitor" from the list and click Change/Remove.

2.3 Connecting the Product to a PC to Use "Central Station"

Connect the product to a PC via Wireless USB and the USB cable.

Connecting the product and PC via Wireless USB and the USB cable will allow you to hear audio when

you plug headphones or speakers into [ ] on the product.

If a PC is connected, the product will automatically switch to the mode of the detected input source. If

several source devices are connected to the product, the input source will automatically change

1 2

3 4

282 Using "Central Station"

Using "Central Station"2

according to this priority, from left to right: Analog mode > HDMI mode > Wireless USB mode > USB

mode.

If the product connects to a PC for the first time, the optimum resolution (1920 x 1080) will be selected

automatically and a message will appear confirming that you want to set the display to extended mode.

The same resolution will be applied from the next time the product connects to the PC.

When multiple display output ports on the PC are connected to the Central Station monitor, different

signals may output depending on the system specifications of the PC.

2.3.1 Connecting to a PC via Wireless USB

To use the Wireless USB function, the wireless-connection dongle provided (as a component) should be

connected to the USB port on the PC. The wireless-connection dongle allows a wireless connection

between the product and a PC. The dongle connected to a PC should point at the product to maximize

signal reception.

Wireless communication can be affected by the surrounding environmental conditions. Do not place an

object, or obstacle, between the monitor and PC. The object can affect the sensitivity of the signal

transmission/reception.

Ensure you install the Central Station monitor at the same height as the transmitter (dongle) on the

PC.

CSM

292 Using "Central Station"

Using "Central Station"2

The table can be an obstacle and degrade wireless performance if the Central Station monitor is not placed at the same height as the transmitter (dongle) on the PC, even if the monitor and transmitter face each other.

The sensitivity of the signal reception/transmission can affect the performance of video or game

playback (choppy or slowed-down video).

To maximize the transmission/reception, attach the transmitter (dongle) to the closest USB port (on

either side of the notebook PC) to the Central Station monitor.

To maximize the wireless communication performance, ensure your PC is within a range of 27.6 inch

from the Central Station monitor.Ensure the PC and monitor are placed on the same table or at the

same height. Otherwise, the signal transmission/reception can be degraded.

Using the Central Station monitor on a steel table will degrade wireless performance.

Do not place any object that can obstruct the signal transmission in front of the product. Such

objects may decrease signal reception.

This product cannot connect to multiple PCs wirelessly at the same time and vice versa.

Connecting to a PC via Wireless USB

1 Install "Samsung Central Station Setup" on the PC, and attach the dongle to the USB port on the

PC.

2 Press [ ] to change the input source for the product to Wireless.

3 Double-click the "Wireless Connection Manager" icon created on the desktop. The following screen

will appear.

Five levels of signal intensity are available.

All the five signal intensity indicator bars, including the green bar, will be lit when the strongest signal

is received. The weakest signal intensity will turn on the red bar only.

The following Welcome to the Found New Hardware Wizard message may appear when the

product attempts to connect to a PC via Wireless USB. If the message appears, proceed with

installation following the instructions displayed.

302 Using "Central Station"

Using "Central Station"2

4 Double-click the hub monitor to open the following screen.

If a connection is established between the product and PC, [ ] will appear over the signal intensity

bars as shown below and the product will display the PC screen. If [ ] does not appear, the

connection is not established between the product and PC.

5 Right-click in the Connected Monitor to open the menu page as below.

Disconnect: Disconnect Wireless between the product and PC.

Set as default: Give first priority to the product to connect to the PC once a Wireless signal is

detected. A star will appear beside the monitor icon if the product is set as the default monitor.

Ensure the wireless ID below "Monitor device" matches the wireless ID on the HUB menu

screen.

Wireless ID is a unique ID assigned to a monitor. The SAMSUNG Central Station Setup

program reads the ID and identifies each of nearby monitors. The ID is shown in the

SAMSUNG Central Station Setup program and in the lower part of the HUB menu.

A different ID (number) is displayed for each product. (The ID is displayed as shown below.)

312 Using "Central Station"

Using "Central Station"2

Rename: Customize the name of the connected monitor.

The program will automatically activate to allow you to use the Wireless USB connection even

when the "Wireless Display" window is closed.

Automatic/manual Wireless USB connection

Set Auto Wireless Detection to On under HUB in the on-screen display menu. A Wireless USB

connection will automatically be established if the product is within 1.5 m from the PC. The first priority

will be given to a Wireless USB connection even when the product is in power-saving mode or is

connected to another input source (Analog/USB/HDMI). The Connecting to PC message will be

displayed while connection is attempted.

To establish a Wireless USB connection when Auto Wireless Detection is set to Off, press [ ] to switch

to Wireless USB mode. The Connecting to PC message will be displayed while connection is

attempted. Deactivating the Wireless USB mode will automatically restore the previous mode.

2.3.2 Connecting to a PC via the USB Cable

Connect the USB cable to [ ] on the back of the product and USB [ ] on the PC.

The product is compatible with a USB 2.0 cable. However, it is best to use a USB 3.0 cable for the

product to function fully.

Connecting to a PC using the USB cable

1 Connect a desktop PC to the product using the USB cable.

2 Press [ ] to change the input source for the product to USB mode.

3 The product will display the PC screen if the connection is established.

Automatic/manual USB cable connection

The input source will automatically change to USB mode if a USB cable connects to the product and a

PC. If the input source does not switch to USB mode automatically, press [ ] to switch to USB mode.

Top priority will be given to Wireless USB mode if the product is connected to Wireless USB and a USB

cable at the same time.

USB

322 Using "Central Station"

Using "Central Station"2

2.4 Utilizing "Central Station"

Central Station is only available when the product is connected to a PC via Wireless USB or a USB cable.

2.4.1 Using the Product as a USB HUB

Using the product as a hub, connect and use various source devices with the product at the same time.

A PC cannot connect to multiple source devices at the same time as it has a limited number of input/

output ports available. The HUB feature on the product will improve your work efficiency by allowing you

to connect multiple source devices to the USB ports on the product at the same time without connecting

them to a PC.

The product is compatible with a USB 2.0 cable. However, your PC should support USB 3.0 for the HUB function to work fully.

If you experience a communication problem with a PC that provides the USB 3.0 function, download and install the latest driver version from the PC manufacturer.

Using the Product as a USB HUB

If multiple source devices are connected to the PC, the many cables around the PC may look messy.

Connecting the devices directly to the product will resolve such inconvenience.

To detect and start a source device faster, connect the device to the blue USB 3.0 port on the left side of the product.

USB 3.0 CABLE

Wlreless USB

332 Using "Central Station"

Using "Central Station"2

An external mass-storage HDD requires external power supply. Be sure to connect it to a power source.

Connect a mobile IT device such as an MP3 player or smart phone to the product when connected to a

PC. This allows you to use the device from the PC or charge the battery on the device.

To charge the battery of a device, be sure to connect the device to the blue USB 3.0 port on the left side of the product.

Battery charging is available in power-saving mode, but not available when the product is powered off.

Note that the battery will not be charged if the power cable is disconnected from the power socket.

Connect multiple source devices to the product and use the device you want by changing the input

source.

2.4.2 Connecting to a LAN

"Central Station" allows you to use the Internet from a PC when you connect a LAN cable to the product

(if the product is connected to the PC), without having to connect the LAN cable directly to the PC.

Wlreless USB

USB3.0 CABLE

Wlreless USB

USB3.0 CABLE

342 Using "Central Station"

Using "Central Station"2

This is achieved by an internal chip that transmits data received via the LAN cable to the PC as a

converted USB signal.

Connecting to a LAN via Wireless USB

Connecting to a LAN via USB cable

This product cannot connect to multiple source PCs at the same time and vice versa.

2.5 Configuring the Central Station Monitor IP

1 After installing the integrated driver for Central Station monitors, go to Control Panel Network

and Internet Network and Sharing Center Change adapter settings.

2 You can see that the following two devices are displayed.

a. The user PCs network device

b. The Central Station monitors network device (USB to Ethernet adapter)

The two devices above refer to your PCs LAN network device and your Central Station monitors

network device.

To use the Internet using the Central Station monitors LAN network, configure the network settings as

follows according to the type of IP you will be using.

2.5.1 Dynamic IP

The dynamic IP address mode automatically configures the network settings on the PC using data sent

by a server, which allots an IP address. This is possible, owing to the DHCP (Dynamic Host

Configuration Protocol) service. The service consists of three steps: an IP address allotment request is

sent to the DHCP server when the PC boots up, the DHCP server that received the request transmits

LAN

LAN USB CABLE

352 Using "Central Station"

Using "Central Station"2

network information such as the IP address to the PC, and the transmitted network information is

automatically registered to the network settings on the PC. The DHCP service is convenient and useful

especially in an environment where multiple PCs are used. Theoretically, the IP address changes each

time the PC boots up (or an IP allotment request is sent); in many cases, however, the existing IP address

is re-allotted. An Internet router performs two roles: creating a private IP address (NAT service) and

automatically allotting the IP address to each PC (DHCP service) at the same time.

When using your Central Station monitors or notebook PCs LAN network, ensure you insert a LAN

cable into only one device. Otherwise, a system crash may occur.

Dynamic IP User

1 To use a dynamic IP address, connect a LAN to your Central Station monitor.

2 Next, go to the network settings menu and activate the Central Station monitors network device

(select Use).

Go to Control Panel Network and Internet Network and Sharing Center Change

adapter settings. Next, right-click on the Central Station monitors network device (marked

LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7) and select Use.

3 Using the network properties menu, check that the IP address mode for the Central Station

monitors network device is set to Auto.

Go to Control Panel Network and Internet Network and Sharing Center Change

adapter settings. Next, right-click on the Central Station monitors network device (marked

LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7).

3 62 Using "Central Station"

Using "Central Station"2

Select Properties Internet Protocol Version 4 (TCP/IPv4) Properties.

2.5.2 Static IP

To configure the IP address (private or official) on your PC, someone (mostly a server system) must

distribute and allot an IP address to the PC. An official IP address is allotted by your Internet service

provider, and a private IP address is allotted by your Internet router. You can select whether to configure

the IP address on the PC automatically or manually. The static IP address mode is used to manually enter

an IP address. The static IP address mode is suitable if the IP address for the PC should not be changed

(such as for a file sharing server) and generally is not used, except under such special circumstances.

When using your Central Station monitors or notebook PCs LAN network, ensure you insert a LAN

cable into only one device. Otherwise, a system crash may occur.

Static IP User

1 Set the LAN network for the notebook PC to Disable.

2 Go to Control Panel Network and Internet Network and Sharing Center Change

adapter settings. Next, right-click on the notebook PCs network device and select Disable.

3 Right-click on the Central Station monitors network device (marked LAN9512/LAN9514 USB 2.0

to Ethernet 10/100 Adapter #7), and select Use.

Be sure to perform this process before configuring the IP.

4 Configure the static IP.

Assign the static IP that is allotted to the Central Station monitors network device.

Go to Control Panel Network and Internet Network and Sharing Center Change

adapter settings. Next, right-click on the Central Station monitors network device (marked

372 Using "Central Station"

Using "Central Station"2

LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7), select Properties Internet

Protocol Version 4 (TCP/IPv4) Properties, and configure the static IP and DNS settings.

5 After configuring the IP, click OK. The following message will appear.

A static IP must be allotted to only one network device. The following message will appear if the

same static IP is allotted to the network devices of both the notebook PC and Central Station

monitor. (Ensure the network device that is not in use is set to Do not use.)

Select No in the message window.

To use the notebook PCs LAN network, set the Central Station monitors network to Do not use

and the notebook PCs network device to Use. Next, configure the IP settings.

6 Click Close.

382 Using "Central Station"

Using "Central Station"2

2.6 Notice before your use of Wireless USB or USB Mode

1 Most of the games require high resolution and fast response time. When you play a game, we

recommend to use Analog or HDMI Mode rather than Wireless USB or USB Mode. Also, for playing

Game and Movie clips on Windows XP or VISTA is not supported.

2 When Wireless USB/USB Mode is used for first time or PC power saving mode is disconnected, it

may take some time to acknowledge for Wireless USB/USB Mode.

3 Either it is Wireless USB or USB Mode(USB2.0 supported by PC), we recommend to connect to

USB2.0 port for USB HUB function.(black colored connector).

4 When you use Wireless USB mode and PC goes down to Standby mode, you cannot use USB Hub

function since Wireless USB is disconnected to PC.

392 Using "Central Station"

3 C

onnecting and Using a Source Device

3.1 Before Connecting

3.1.1 Pre-connection Checkpoints

Before connecting a source device, read the user manual provided with it.

The number and locations of ports on source devices may differ from device to device.

Do not connect the power cable until all connections are completed.

Connecting the power cable during connection may damage the product.

Check the types of ports at the back of the product you want to connect.

403 Connecting and Using a Source Device

Connecting and Using a Source Device3

3.2 Connecting and Using a PC

3.2.1 Connecting to a PC

Select a connection method suitable for your PC.

Connecting parts may differ in different products.

Connection using the D-SUB cable (Analogue type)

1 Connect the D-SUB cable to the D-SUB port on the back of the product and the RGB port on the

PC.

2 Connect the DC power adapter to the product and a power socket, and turn on the power switch

on the PC.

Audio is not available if the PC and product are connected via the D-SUB port.

Connection Using an HDMI-DVI Cable

1 Connect an HDMI-DVI cable to the HDMI port on the side of the product and the DVI port on the PC.

2 Connect the DC power adapter to the product and a power socket, and turn on the power switch

on the PC.

Audio is not available if the PC and product are connected via the HDMI-DVI port.

D-SUB

HDMI

IN

413 Connecting and Using a Source Device

Connecting and Using a Source Device3

Connection Using an HDMI Cable (Digital Type)

1 Connect an HDMI cable to the HDMI port on the side of the product and the HDMI port on the PC.

2 Connect the DC power adapter to the product and a power socket, and turn on the power switch

on the PC.

Be sure to connect an audio output device such as headphones or speakers to [ ] on the product to

hear audio.

HDMI

IN

423 Connecting and Using a Source Device

Connecting and Using a Source Device3

3.2.2 Driver Installation

You can set the optimum resolution and frequency for this product by installing the corresponding drivers for this product.

An installation driver is contained on the CD supplied with the product.

If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com) and download the file.

1 Insert the user manual CD provided with the product into the CD-ROM drive.

2 Click "Windows Driver".

3 Follow the instructions given on the screen to proceed with installation.

4 Select your product model from the list of models.

5 Go to Display Properties and check that the resolution and refresh rate are appropriate.

Refer to your Windows OS manual for further details.

PC System Requirements for Using the Product

Your Central Station monitor is designed for notebook PC users; consider the following PC system

requirements.

The operating system on your PC can affect the PC's performance for video or game playback.

It is recommended that you use Windows 7 for the Central Station monitor.

Items Specifications

CPU Core Core2Duo or higher

CPU Speed 2.2 GHz or higher

OS WINDOWS 7 or XP (Windows Vista is not supported)

Graphics driver (WINDOWS 7, XP) Intel, AMD(ATI), Nvidia

RAM 2GB

433 Connecting and Using a Source Device

Connecting and Using a Source Device3

3.2.3 Setting Optimum Resolution

An information message about setting optimum resolution will appear if you power on the product for the

first time after purchase.

Select a language and change the resolution to the optimum value.

1 Press [ ] to move to the language you want and press the [ ].

2 To hide the information message, press [ ].

If the optimum resolution is not selected, the message will appear up to three times for a specified time even when the product is turned off and on again.

The optimum resolution (1920 x 1080) can also be selected in Control Panel on your PC.

The optimal resolution for this monitor is as follows: 1920 x 1080 60Hz

Follow the above settings to set the resolution.

English

m

443 Connecting and Using a Source Device

Connecting and Using a Source Device3

3.2.4 Changing the Resolution Using a PC

Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.

The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.

Changing the Resolution on Windows XP

Go to Control Panel Display Settings and change the resolution.

1 2 3

**** ****

**********

453 Connecting and Using a Source Device

Connecting and Using a Source Device3

Changing the Resolution on Windows Vista

Go to Control Panel Personalization Display Settings and change the resolution.

1 2

3 4

*********** ***********

463 Connecting and Using a Source Device

Connecting and Using a Source Device3

Changing the Resolution on Windows 7

Go to Control Panel Display Screen Resolution and change the resolution.

**** ****

1 2

3 4

473 Connecting and Using a Source Device

Connecting and Using a Source Device3

3.3 Connecting to a Video Device

The product can be connected to a video device.

Connecting parts may differ in different products.

3.3.1 Connection Using an HDMI Cable

1 Connect an HDMI cable to the HDMI ports on the product and video device.

2 Press [ ] to change the input source to HDMI.

Be sure to connect an audio output device such as headphones or speakers to [ ] on the product to

hear audio.

3.4 Connecting Headphones

Connect an audio output device such as headphones or speakers to [ ] on the product.

Headphones will function properly if the product is connected to a PC via USB, Wireless USB or

HDMI.

HDMI

IN

HEADPHONE

483 Connecting and Using a Source Device

4 S Co

creen Setup nfigure the screen settings such as brightness and color tone.

4.1 MAGIC

This feature provides the viewing angle, brightness, and tint to suit your preferences.

4.1.1 SAMSUNG MAGIC Angle

Angle allows you to configure the settings to obtain the optimum picture quality according to your

viewing angle.

You can enjoy similar picture quality to when you view directly in front of the product by selecting a

viewing mode appropriate for each viewing angle.

This option is not available when Bright is in Cinema or Dynamic Contrast mode.

This option is not available when Color is enabled.

Configuring Angle

1 Press [ ] on the product.

2 Press [ ] to move to Picture and press [ ] on the product.

3 Press [ ] to move to MAGIC and press [ ] on the product.

4 Press [ ] to move to Angle and press [ ] on the product. The following screen will

appear.

Off : Select this option to view directly in front of the product.

Lean Back Mode 1 : Select this option to view from a place slightly lower than the product.

m

Return EnterAdjust

Off Lean Back Mode 1 Lean Back Mode 2 Standing Mode Side Mode Group View Custom

MAGIC

SAMSUNG MAGIC :

:

:

Angle

SAMSUNG MAGIC Bright

SAMSUNG MAGIC Color

1 5 5

4

2

3

1

494 Screen Setup

Screen Setup4

Lean Back Mode 2 : Select this option to view from a place lower than Lean Back Mode 1

mode.

Standing Mode : Select this option to view from a place higher than the product.

Side Mode : Select this option to view from either side of the product.

Group View: Select this option for more than one viewer to view from places , and .

Custom: Lean Back Mode 1 will be applied by default if Custom is selected.

5 Press [ ] to move to the option you want and press the [ ].

6 The selected option will be applied.

4.1.2 SAMSUNG MAGIC Bright

This menu provides an optimum picture quality suitable for the environment where the product will be

used.

This menu is not available when Angle is enabled.

Sub-options under Bright may vary depending on the settings of "PC/AV Mode." (See "7.5 PC/AV Mode")

Configuring Bright

1 Press [ ] on the product.

2 Press [ ] to move to Picture and press [ ] on the product.

3 Press [ ] to move to MAGIC and press [ ] on the product.

4 Press [ ] to move to Bright and press [ ] on the product. The following screen will

appear.

In PC mode

Adjusting Contrast when Bright is set to Cinema will automatically switch the Cinema mode to Custom mode.

Adjusting Brightness or Contrast when Bright is set to Dynamic Contrast will automatically switch the Dynamic Contrast mode to Custom mode.

Custom: Customize the contrast and brightness as required.

Standard: Obtain a picture quality suitable for editing documents or using Internet.

m

Return EnterAdjust

Custom Standard Game Cinema Dynamic Contrast

MAGIC

SAMSUNG MAGIC :

:

:

Angle

SAMSUNG MAGIC Bright

SAMSUNG MAGIC Color

Off

504 Screen Setup

Screen Setup4

Game: Obtain a picture quality suitable for playing games that involve many graphic effects and

dynamic movements.

Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD

content.

Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.

In AV mode

Dynamic: This mode is suitable when the ambient light is bright.

Standard: This mode is generally suitable for any environment.

Movie: This mode reduces eye fatigue.

Custom: Customize the contrast and brightness as required.

5 Press [ ] to move to the option you want and press the [ ].

6 The selected option will be applied.

4.1.3 Configuring SAMSUNG MAGIC Color

Color is a new picture-quality improvement technology developed independently by Samsung,

which delivers vivid natural colors without picture quality degradation.

This menu is not available when Angle is enabled.

Not available when Bright is in Cinema or Dynamic Contrast mode.

Configuring Color

1 Press [ ] on the product.

2 Press [ ] to move to Picture and press [ ] on the product.

3 Press [ ] to move to MAGIC and press [ ] on the product.

Return EnterAdjust

Dynamic Standard Movie Custom

MAGIC

SAMSUNG MAGIC :

:

:

Angle

SAMSUNG MAGIC Bright

SAMSUNG MAGIC Color

Off

m

514 Screen Setup

Screen Setup4

4 Press [ ] to move to Color and press [ ] on the product. The following screen will

appear.

Off: Disable Color.

Demo: Compare normal screen mode with Color mode.

Full: Obtain a vivid picture quality for all areas including the flesh colors in the picture.

Intelligent: Improve the chroma for all areas except the flesh colors in the picture.

5 Press [ ] to move to the option you want and press the [ ].

6 The selected option will be applied.

4.2 Brightness

Adjust the general brightness of the picture. (Range: 0~100)

A higher value will make the picture appear brighter.

4.2.1 Configuring Brightness

1 Press [ ] on the product.

2 Press [ ] to move to Picture and press [ ] on the product.

3 Press [ ] to move to Brightness and press [ ] on the product. The following screen will appear.

4 Adjust the Brightness using the [ ] button.

Return EnterAdjust

Off Demo Full Intelligent

MAGIC

SAMSUNG MAGIC :

:

:

Angle

SAMSUNG MAGIC Bright

SAMSUNG MAGIC Color

Off

Custom

m

Return EnterAdjust

PICTURE

MAGIC

Brightness

Contrast

Sharpness

Coarse

Fine

Response Time

50

60

75

2200

0

Faster

524 Screen Setup

Screen Setup4

4.3 Contrast

Adjust the contrast between the objects and background. (Range: 0~100)

A higher value will increase the contrast to make the object appear clearer.

This option is not available when Color is in Full or Intelligent mode.

4.3.1 Configuring Contrast

1 Press [ ] on the product.

2 Press [ ] to move to Picture and press [ ] on the product.

3 Press [ ] to move to Contrast and press [ ] on the product. The following screen will appear.

4 Adjust the Contrast using the [ ] button.

4.4 Sharpness

Make the outline of objects more clear or blurry. (Range: 0~100)

A higher value will make the outline of objects clearer.

This option is not available when Bright is in Cinema or Dynamic Contrast mode.

This option is not available when Color is in Full or Intelligent mode.

4.4.1 Configuring Sharpness

1 Press [ ] on the product.

2 Press [ ] to move to Picture and press [ ] on the product.

m

Return EnterAdjust

PICTURE

MAGIC

Brightness

Contrast

Sharpness

Coarse

Fine

Response Time

50

60

75

2200

0

Faster

m

534 Screen Setup

Screen Setup4

3 Press [ ] to move to Sharpness and press [ ] on the product. The following screen will appear.

4 Adjust the Sharpness using the [ ] button.

4.5 Coarse

Adjust the screen frequency.

Only available in Analog mode.

4.5.1 Adjusting Coarse

1 Press [ ] on the product.

2 Press [ ] to move to Picture and press [ ] on the product.

3 Press [ ] to move to Coarse and press [ ] on the product. The following screen will appear.

4 Adjust the Coarse using the [ ] button.

Return EnterAdjust

PICTURE

MAGIC

Brightness

Contrast

Sharpness

Coarse

Fine

Response Time

50

60

75

2200

0

Faster

m

Return EnterAdjust

PICTURE

MAGIC

Brightness

Contrast

Sharpness

Coarse

Fine

Response Time

50

60

75

2200

0

Faster

544 Screen Setup

Screen Setup4

4.6 Fine

Fine-adjust the screen to obtain a vivid picture.

Only available in Analog mode.

4.6.1 Adjusting Fine

1 Press [ ] on the product.

2 Press [ ] to move to Picture and press [ ] on the product.

3 Press [ ] to move to Fine and press [ ] on the product. The following screen will appear.

4 Adjust the Fine using the [ ] button.

4.7 Response Time

Accelerate the panel response rate to make video appear more vivid and natural.

It is best to set Response Time to Normal or Faster when you are not viewing a movie.

The functions available on the monitor may vary depending on the model. Refer to the actual product.

4.7.1 Configuring Response Time

1 Press [ ] on the product.

2 Press [ ] to move to Picture and press [ ] on the product.

m

Return EnterAdjust

PICTURE

MAGIC

Brightness

Contrast

Sharpness

Coarse

Fine

Response Time

50

60

75

2200

0

Faster

m

554 Screen Setup

Screen Setup4

3 Press [ ] to move to Response Time and press [ ] on the product. The following screen will

appear.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

4.8 HDMI Black Level

If you use the product by connecting to a DVD player or set-top box with a HDMI cable, the contrast and

color may degrade and the picture may be darker. If this is the case, correct the degraded picture quality

using HDMI Black Level.

1 Press [ ] on the product.

2 Press [ ] to move to Picture and press [ ] on the product.

3 Press [ ] to move to HDMI Black Level and press [ ] on the product. The following screen will

appear.

Normal: Set the brightness (darkness) of the darkest parts of the screen to Normal.

Low: Set the brightness (darkness) of the darkest parts of the screen to be darker than Normal.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

Only available when the product is connected to a source device via an HDMI cable.

HDMI Black Level may not be compatible with some source devices.

Return EnterAdjust

PICTURE

MAGIC

Brightness

Contrast

Sharpness

Coarse

Fine

Response Time

50

60

75

2200

Normal Faster Fastest

m

Return EnterAdjust

PICTURE

HDMI Black Level Normal Low

564 Screen Setup

5 C

Ad

onfiguring Tint

just the tint of the screen. This option is not available when Bright is set to Cinema or

Dynamic Contrast mode.

5.1 Red

Adjust the value of the color red in the picture. (Range: 0~100)

A higher value will increase the intensity of the color.

This option is not available when Color is in Full or Intelligent mode.

5.1.1 Configuring Red

1 Press [ ] on the product.

2 Press [ ] to move to COLOR and press [ ] on the product.

3 Press [ ] to move to Red and press [ ] on the product. The following screen will appear.

4 Adjust the Red using the [ ] button.

5.2 Green

Adjust the value of the color green in the picture. (Range: 0~100)

A higher value will increase the intensity of the color.

This option is not available when Color is in Full or Intelligent mode.

5.2.1 Configuring Green

1 Press [ ] on the product.

2 Press [ ] to move to COLOR and press [ ] on the product.

m

COLOR

Red

Green

Blue

Color Tone

Gamma Mode1

50

50

Normal

50

Return Adjust Enter

m

575 Configuring Tint

Configuring Tint5

3 Press [ ] to move to Green and press [ ] on the product. The following screen will appear.

4 Adjust the Green using the [ ] button.

5.3 Blue

Adjust the value of the color blue in the picture. (Range: 0~100)

A higher value will increase the intensity of the color.

This option is not available when Color is in Full or Intelligent mode.

5.3.1 Configuring Blue

1 Press [ ] on the product.

2 Press [ ] to move to COLOR and press [ ] on the product.

3 Press [ ] to move to Blue and press [ ] on the product. The following screen will appear.

4 Adjust the Blue using the [ ] button.

COLOR

Red

Green

Blue

Color Tone

Gamma Mode1

50

50

Normal

50

Return Adjust Enter

m

COLOR

Red

Green

Blue

Color Tone

Gamma

50

50

Normal

50

Return Adjust Enter

585 Configuring Tint

Configuring Tint5

5.4 Color Tone

Adjust the general color tone of the picture.

This option is not available when Angle is enabled.

This option is not available when Color is in Full or Intelligent mode.

5.4.1 Configuring the Color Tone Settings

1 Press [ ] on the product.

2 Press [ ] to move to COLOR and press [ ] on the product.

3 Press [ ] to move to Color Tone and press [ ] on the product. The following screen will appear.

Cool2: Set the color temperature to be cooler than Cool1.

Cool1: Set the color temperature to be cooler than Normal mode.

Normal: Display the standard color tone.

Warm1: Set the color temperature to be warmer than Normal mode.

Warm2: Set the color temperature to be warmer than Warm1.

Custom: Customize the color tone.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

m

Return EnterAdjust

COLOR

Red

Green

Blue

Color Tone

Gamma

Cool 2 Cool 1 Normal Warm 1 Warm 2 Custom

50

50

50

595 Configuring Tint

Configuring Tint5

5.5 Gamma

Adjust the mid-range brightness (Gamma) of the picture.

This option is not available when Angle is enabled.

5.5.1 Configuring Gamma

1 Press [ ] on the product.

2 Press [ ] to move to COLOR and press [ ] on the product.

3 Press [ ] to move to Gamma and press [ ] on the product. The following screen will appear.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

m

Return EnterAdjust

COLOR

Red

Green

Blue

Color Tone

Gamma Mode1 Mode2 Mode3

50

50

50

Normal

605 Configuring Tint

6 R

esizing or Relocating the Screen

6.1 Auto Adjustment

This function can be used to automatically adjust the Coarse, Fine and position settings.

This function can be used to automatically detect and remove noise on the screen and correct the screen

position.

This function will automatically run if the screen resolution is changed.

Only available in Analog mode.

6.1.1 Configuring the Auto Adjustment Settings

1 Press [ ] on the product.

2 Press ] to move to SIZE&POSITION and press [ ] on the product.

3 Press [ ] to move to Auto Adjustment and press [ ] on the product. The following screen will

appear.

6.2 Size

Change the picture size.

6.2.1 Changing the Picture Size

1 Press [ ] on the product.

2 Press [ ] to move to SIZE&POSITION and press [ ] on the product.

3 Press [ ] to move to Image Size and press [ ] on the product. The following screen will appear.

In PC mode

m

Auto Adjustment 50%

m

Return EnterAdjust

SIZE&POSITION

Auto Adjustment

Image Size

H-Position

V-Position

Menu H-Position

Menu V-Position

10

50

50

Auto Wide

[

616 Resizing or Relocating the Screen

Resizing or Relocating the Screen6

Auto: Display the picture according to the aspect ratio of the input source.

Wide: Display the picture in full screen regardless of the aspect ratio of the input source.

In AV mode

4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.

16:9: Display the picture with an aspect ratio of 16.9. Suitable for DVD content or widescreen

broadcasts.

Screen Fit: Display the picture with the original aspect ratio without cutting off.

PC/AV Mode is only available in HDMI mode.

H-Position or V-Position can be adjusted if Size is set to Screen Fit.

Refer to "7.5 PC/AV Mode" for details about PC/AV Mode.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

6.3 Horizontal Position

Move the screen to the left or right.

Only available in Analog mode.

H-Position or V-Position can be adjusted if Size is set to Screen Fit.

6.3.1 Configuring H-Position

1 Press [ ] on the product.

2 Press [ ] to move to SIZE&POSITION and press [ ] on the product.

Return EnterAdjust

SIZE&POSITION

Auto Adjustment

Image Size

H-Position

V-Position

Menu H-Position

Menu V-Position

50

4 : 3 16 : 9 Screen Fit

10

m

626 Resizing or Relocating the Screen

Resizing or Relocating the Screen6

3 Press [ ] to move to H-Position and press [ ] on the product. The following screen will appear.

4 Adjust the H-Position using the [ ] button.

6.4 Vertical Position

Move the screen up or down.

Only available in Analog mode.

H-Position or V-Position can be adjusted if Size is set to Screen Fit.

6.4.1 Configuring V-Position

1 Press [ ] on the product.

2 Press [ ] to move to SIZE&POSITION and press [ ] on the product.

3 Press [ ] to move to V-Position and press [ ] on the product. The following screen will appear.

4 Adjust the V-Position using the [ ] button.

Return EnterAdjust

SIZE&POSITION

Auto Adjustment

Image Size

H-Position

V-Position

Menu H-Position

Menu V-Position

10

50

Wide

50

50

m

Return EnterAdjust

SIZE&POSITION

Auto Adjustment

Image Size

H-Position

V-Position

Menu H-Position

Menu V-Position

10

Wide

50

50

50

636 Resizing or Relocating the Screen

Resizing or Relocating the Screen6

6.5 Menu H-Position

Move the menu position to the left or right.

6.5.1 Configuring Menu H-Position

1 Press [ ] on the product.

2 Press [ ] to move to SIZE&POSITION and press [ ] on the product.

3 Press [ ] to move to Menu H-Position and press [ ] on the product. The following screen will

appear.

4 Adjust the Menu H-Position using the [ ] button.

m

Return EnterAdjust

SIZE&POSITION

Auto Adjustment

Image Size

H-Position

V-Position

Menu H-Position

Menu V-Position

10

Wide

50

50

50

646 Resizing or Relocating the Screen

Resizing or Relocating the Screen6

6.6 Menu V-Position

Move the menu position up or down.

6.6.1 Configuring Menu V-Position

1 Press [ ] on the product.

2 Press [ ] to move to SIZE&POSITION and press [ ] on the product.

3 Press [ ] to move to Menu V-Position and press [ ] on the product. The following screen will

appear.

4 Adjust the Menu V-Position using the [ ] button.

m

Return EnterAdjust

SIZE&POSITION

Auto Adjustment

Image Size

H-Position

V-Position

Menu H-Position

Menu V-Position

Wide

50

50

50

10

656 Resizing or Relocating the Screen

7 S

etup and Reset

7.1 HUB

Configure the settings to use the HUB function on the product.

Refer to "2.1 About "Central Station"" for details about how to use the HUB function.

To open the HUB settings screen, press HUB on the stand.

7.1.1 Auto Wireless Detection

If the product is connected to a PC via Wireless USB, it will automatically detect the Wireless USB signal

and change the input source to Wireless USB mode.

Configuring Auto Wireless Detection

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to HUB and press [ ] on the product.

4 Press [ ] to move to Auto Wireless Detection and press [ ] on the product. The following screen

will appear.

Off: Deactivate the auto wireless detection mode.

On: Automatically detect a Wireless USB signal and change the input source to Wireless USB

mode.

5 Press [ ] to move to the option you want and press the [ ].

6 The selected option will be applied.

7.1.2 Wireless Connection

You can view the status of the Wireless USB connection between the product and a PC.

Select the Wireless Connection option. The input source will change to Wireless USB mode.

The connection status will be shown even when the input source is not Wireless USB mode.

Selecting Wireless Connection when a Wireless USB connection is established will change the input source to Wireless USB mode.

m

Return EnterAdjust

HUB

Auto Wireless Detection

Wireless Connection

USB Connection

Analog

HDMI

USB Super Charging

Wireless ID

Off On

Disconnected

Disconnected

Disconnected

667 Setup and Reset

Setup and Reset7

Activating Wireless Connection

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating that a

Wireless USB connection is established or disconnected.

4 If a Wireless USB connection is established, press [ ] to move to Wireless Connection and press

[ ]. The input source will change to Wireless USB mode.

7.1.3 USB Connection

You can view the USB cable connection status between the product and a PC.

The connection status will be shown even when the input source is not USB mode.

Selecting the USB Connection option when a USB cable is connected will change the input source to USB mode.

Configuring USB Connection

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating that a

USB cable is connected or disconnected.

4 If a USB cable is connected, press [ ] to move to USB Connection and press [ ]. The input

source will change to USB mode.

m

Return EnterMove

HUB

Auto Wireless Detection

Wireless Connection

USB Connection

Analog

HDMI

USB Super Charging

Wireless ID

Off

Disconnected

Disconnected

Disconnected

Connected

m

Return EnterMove

HUB

Auto Wireless Detection

Wireless Connection

USB Connection

Analog

HDMI

USB Super Charging

Wireless ID

Off

Connected

Disconnected

Disconnected

Disconnected

677 Setup and Reset

Setup and Reset7

7.1.4 Analog

You can view the Analog cable connection status between the product and a PC.

The connection status will be shown even when the input source is not Analog mode.

Selecting the Analog option when an analog cable is connected will change the input source to Analog mode.

Configuring Analog

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating that

an analog cable is connected or disconnected.

4 If an analog cable is connected, press [ ] to move to Analog and press [ ]. The input source will

change to Analog mode.

7.1.5 HDMI

You can view the HDMI connection status between the product and an AV device.

The connection status will be shown even when the input source is not HDMI mode.

Selecting the HDMI option when an HDMI cable is connected will change the input source to HDMI mode.

Configuring HDMI

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating that

an HDMI cable is connected or disconnected.

m

Return EnterMove

HUB

Auto Wireless Detection

Wireless Connection

USB Connection

Analog

HDMI

USB Super Charging

Wireless ID

Off

Disconnected

Connected Disconnected

Disconnected

m

687 Setup and Reset

Setup and Reset7

4 If an HDMI cable is connected, press [ ] to move to HDMI and press [ ]. The input source will

change to HDMI mode.

7.1.6 USB Super Charging

A source device's battery can be charged quickly via USB 3.0 port on the product.

Data transmission is not available if USB Super Charging is on.

To enable standard charging or data transmission, set USB Super Charging to off.

The input source does not need to be changed.

Configuring USB Super Charging

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET, and press [ ] on the product.

3 Press [ ] to move to HUB, and press [ ] on the product.

4 Press [ ] to move to USB Super Charging, and press [ ] on the product. The following screen

will appear.

Off: Disable USB Super Charging.

1 Port: Enable a single USB 3.0 port (marked with a charging icon) for quick battery charging.

Quick battery charging is available only through one USB 3.0 port (it is found on the left side

and is the port closest to you when facing the front of the monitor).

2 Ports: Enable two USB 3.0 ports for quick battery charging.

5 Press [ ] to move to the option you want, and press [ ] .

6 The selected option will be applied.

Return EnterMove

HUB

Auto Wireless Detection

Wireless Connection

USB Connection

Analog

HDMI

USB Super Charging

Wireless ID

Off

Disconnected

Disconnected

Connected

Disconnected

m

Return EnterMove

HUB

Auto Wireless Detection

Wireless Connection

USB Connection

Analog

HDMI

USB Super Charging

Wireless ID

Off

Disconnected

Disconnected

Disconnected

Disconnected

Off 1 Port 2 Ports

697 Setup and Reset

Setup and Reset7

7.1.7 Wireless ID

Wireless ID is a unique ID assigned to a monitor. The "Samsung Central Station Setup" program reads

the ID and identifies each of nearby monitors. The ID is shown in the "Samsung Central Station Setup"

program and in the lower part of the HUB menu.

7.2 Eco Saving

Adjust the power consumption of the product to save energy.

7.2.1 Configuring Eco Saving

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Eco Saving and press [ ] on the product. The following screen will appear.

75%: Reduce the power consumption of the product to 75%.

50%: Reduce the power consumption of the product to 50%.

Off: Deactivate power-saving mode.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

m

Return EnterAdjust

SETUP&RESET

HUB

Eco Saving

Language

PC/AV Mode

Auto Source

Display Time

Off

75% 50%

English

PC

Manual

20 sec

707 Setup and Reset

Setup and Reset7

7.3 Menu Transparency

Set the transparency for the menu windows:

7.3.1 Changing Menu Transparency

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Menu Transparency and press [ ] on the product. The following screen will

appear.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

7.4 Language

Set the menu language.

A change to the language setting will only be applied to the onscreen menu display.

It will not be applied to other functions on your PC.

7.4.1 Changing the Language

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

m

Return EnterAdjust

SETUP&RESET

HUB

Eco Saving

Menu Transparency

Language

PC/AV Mode

Auto Source

Display Time

20 sec

Off

PC

Manual

Off On

m

717 Setup and Reset

Setup and Reset7

3 Press [ ] to move to Language and press [ ] on the product. The following screen will appear.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

7.5 PC/AV Mode

Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.

PC/AV Mode is only available in HDMI mode.

7.5.1 Configuring PC/AV Mode

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to PC/AV Mode and press [ ] on the product. The following screen will

appear.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

Return EnterMove

SETUP&RESET

HUB

Eco Saving

Menu Transparency

Language

PC/AV Mode

Auto Source

Display Time

m

Return EnterAdjust

SETUP&RESET

Off

On

English

20 sec

HUB

Eco Saving

Menu Transparency

Language

PC/AV Mode

Auto Source

Display Time

PC AV

727 Setup and Reset

Setup and Reset7

7.6 Auto Source

Activate Auto Source.

7.6.1 Configuring Auto Source

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Auto Source and press [ ] on the product. The following screen will

appear.

Auto: The input source is automatically recognized.

Manual: Manually select an input source.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

7.7 Display Time

Set the on screen display (OSD) menu to automatically disappear if the menu is not used for a specified

period of time.

Display Time can be used to specify the time after which you want the OSD menu to disappear.

7.7.1 Configuring Display Time

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

m

Return EnterAdjust

SETUP&RESET

Off

On

English

PC

HUB

Eco Saving

Menu Transparency

Language

PC/AV Mode

Auto Source

Display Time

Auto Manual

m

737 Setup and Reset

Setup and Reset7

3 Press [ ] to move to Display Time and press [ ] on the product. The following screen will

appear.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

7.8 Key Repeat Time

Control the response rate of a button when the button is pressed.

7.8.1 Configuring Key Repeat Time

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Key Repeat Time and press [ ] on the product. The following screen will

appear.

Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds

only once when a button is pressed.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

Return EnterAdjust

SETUP&RESET

Off

On

English

HUB

Eco Saving

Menu Transparency

Language

PC/AV Mode

Auto Source

Display Time

5 sec 10 sec 20 sec 200 sec

m

Return EnterAdjust

Key Repeat Time

Off Timer On/Off

Off Timer Setting

Reset

Acceleration 1 sec 2 sec No Repeat

SETUP&RESET

747 Setup and Reset

Setup and Reset7

7.9 Off Timer On/Off

Enable or disable the off timer that automatically powers off the product.

7.9.1 Configuring Off Timer On/Off

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Off Timer On/Off and press [ ] on the product. The following screen will

appear.

Off: Deactivate the off timer so that the product does not power off automatically.

On: Activate the off timer so that the product powers off automatically.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

7.10 Off Timer Setting

The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the

specified number of hours.

This option is only available when Off Timer On/Off is set to On.

7.10.1 Configuring Off Timer Setting

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

m

Return EnterAdjust

Key Repeat Time

Off Timer On/Off

Off Timer Setting

Reset

Off On

SETUP&RESET

m

757 Setup and Reset

Setup and Reset7

3 Press [ ] to move to Off Timer Setting and press [ ] on the product. The following screen will

appear.

4 Press [ ] to configure Off Timer Setting.

7.11 Reset

Return all the settings for the product to the default factory settings.

7.11.1 Initializing Settings (Reset)

1 Press [ ] on the product.

2 Press [ ] to move to SETUP&RESET and press [ ] on the product.

3 Press [ ] to move to Reset and press [ ] on the product. The following screen will appear.

4 Press [ ] to move to the option you want and press the [ ].

5 The selected option will be applied.

SETUP&RESET

Acceleration

On

Key Repeat Time

Off Timer On/Off

Off Timer Setting

Reset

10 h

Adjust EnterReturn

m

SETUP&RESET

Acceleration

On

Key Repeat Time

Off Timer On/Off

Off Timer Setting

Reset

10 h

Adjust EnterReturn

No Yes

767 Setup and Reset

8 IN

FORMATION Menu and Others

8.1 INFORMATION

View the current input source, frequency and resolution.

8.1.1 Displaying INFORMATION

1 Press [ ] on the product.

2 Press [ ] to move to INFORMATION. The current input source, frequency and resolution will

appear.

8.2 Configuring Brightness in the Startup Screen

Adjust Brightness using the [ ] button in the startup screen where there is no on screen display menu

available.

1 Press [ ] in the startup screen. The following screen will appear.

2 Adjust the Brightness using the [ ] button.

m

SETUP&RESET

Analog

48.2kHz 60Hz NN

1024 x 768

Exit EnterAdjust

PICTURE

COLOR

SIZE&POSITION

INFORMATION

Brightness 100

Exit EnterAdjust

778 INFORMATION Menu and Others

INFORMATION Menu and Others8

8.3 Configuring Volume in the Startup Screen

Adjust Volume using the [ ] button in the startup screen where there is no on screen display menu

available.

Only available in HDMI mode.

1 Press [ ] in the startup screen. The following screen will appear.

2 Adjust the Volume using the [ ] button.

Volume 50

Exit EnterAdjust

788 INFORMATION Menu and Others

INFORMATION Menu and Others8

8.4 Configuring HUB in the Initial Screen

The HUB settings screen can be opened by pressing the [ ] button on the stand when the initial

screen (that displays no OSD menu) is displayed.

1 Press the [ ] button when the initial screen is displayed.

You can configure the settings for Auto Wireless Detection, Wireless Connection, USBConnection,

Analog, HDMI or USB Super Charging. You can also view the wireless ID (Wireless ID).

2 Configure the settings as required using the [ ] buttons.

Refer to "7.1HUB"for further details on how to use the HUB function.

798 INFORMATION Menu and Others

9 Tr

oubleshooting Guide

9.1 Requirements Before Contacting Samsung Customer Service Center

9.1.1 Testing the Product

Before calling Samsung Customer Service Center, test your product as follows. If the problem persists,

contact Samsung Customer Service Center.

Check if your product is operating normally by using the product test function.

If the screen is turned off and the power indicator blinks even though the product is properly connected

to a PC, perform a self-diagnosis test.

1 Power off both the PC and product.

2 Disconnect the cable from the product.

3 Power on the product.

4 If the Check Signal Cable message appears, the product is working normally.

If the screen remains blank, check the PC system, video controller and cable.

9.1.2 Checking the Resolution and Frequency

For a mode that exceeds the supported resolution (refer to "10.3 Standard Signal Mode Table"), the

message Not Optimum Mode. will appear for a short time.

9.1.3 Check the followings.

Installation issue (PC mode)

The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. (Refer to "3.2 Connecting and Using a PC")

Screen issue

The power LED is off. The screen will not switch on.

Check that the power cable is connected correctly (Refer to "3.2 Connecting and Using a PC")

The message Check Signal Cable appears. Check that the cable is properly connected to the product. (Refer to "3.2 Connecting and Using a PC")

Check that the device connected to the product is powered on.

809 Troubleshooting Guide

Troubleshooting Guide9

"Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product.

Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page87).

The images on the screen look distorted. Check the cable connection to the product (Refer to "3.2 Connecting and Using a PC")

The screen is not clear. The screen is blurry. Adjust Coarse(page54) and Fine(page55).

Remove any accessories (video extension cable, etc) and try again.

Set the resolution and frequency to the recommended level. (Refer to "10.1 General")

The screen appears unstable and shaky. Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product, and if required, change the settings, referring to Standard Signal Mode Table (page87) in this manual and the INFORMATION menu on the product.

There are shadows or ghost images left on the screen.

The screen is too bright. The screen is too dark. Adjust Brightness(page52) and Contrast(page53).

Screen color is inconsistent. Change the COLOR settings. (Refer to "Configuring Tint" ON PAGE 57)

The colors on the screen have a shadow and are distorted.

Change the COLOR settings.

(Refer to "Configuring Tint" ON PAGE 57)

White does not really look white. Change the COLOR settings.

(Refer to "Configuring Tint" ON PAGE 57)

There is no image on the screen and the power LED blinks every 0.5 to 1 second.

The product is in power-saving mode.

Press any key on the keyboard or move the mouse to return to the previous screen.

Sound issue

There is no sound. Check the connection of the audio cable or adjust the volume.

Check the volume.

Screen issue

819 Troubleshooting Guide

Troubleshooting Guide9

The volume is too low. Adjust the volume.

If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program.

Source device issue

A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, have your PC serviced.

Sound issue

829 Troubleshooting Guide

Troubleshooting Guide9

9.2 Q & A

Question Answer

How can I change the frequency?

Set the frequency on your graphics card.

Windows XP: Select Control Panel Appearance and

Themes Display Settings Advanced Monitor, and

adjust Refresh rate under Monitor settings.

Windows ME/2000: Select Control

Panel Display Settings Advanced Monitor, and

adjust Refresh rate under Monitor settings.

Windows Vista: Select Control Panel Appearance and

Personalization Personalization Display

Settings Advanced Settings Monitor, and adjust Refresh

rate under Monitor settings.

Windows 7: Select Control Panel Appearance and

Personalization Display Screen Resolution Advanced

settings Monitor, and adjust Refresh rate under Monitor

settings.

839 Troubleshooting Guide

Troubleshooting Guide9

Refer to the user manual for your PC or graphics card for further instructions on adjustment.

How can I change the resolution?

Windows XP: Go to Control Panel Appearance and

Themes Display Settings and adjust the resolution.

Windows ME/2000: Go to Control Panel Display Settings

and adjust the resolution.

Windows Vista: Go to Control Panel Appearance and

Personalization Personalize Display Settings and adjust the

resolution.

Windows 7: Go to Control Panel Appearance and

Personalization Display Adjust Resolution and adjust the

resolution.

How do I set power-saving mode?

Windows XP: Set power-saving mode in Control

Panel Appearance and Themes Display Screen Saver

Settings or BIOS SETUP on the PC.

Windows ME/2000: Set power-saving mode in Control

Panel Display Screen Saver Settings or BIOS SETUP on

the PC.

Windows Vista: Set power-saving mode in Control

Panel Appearance and

Personalization Personalize Screen Saver Settings or BIOS

SETUP on the PC.

Windows 7: Set power-saving mode in Control

Panel Appearance and

Personalization Personalize Screen Saver Settings or BIOS

SETUP on the PC.

Question Answer

849 Troubleshooting Guide

10 S

pecifications

10.1 General

The above specifications are subject to change without notice to improve quality.

Model Name C23A750X C27A750X

Panel Size 23.0 inch / 58cm 27.0 inch / 68cm

Display area 286.74 mm (V) x 509.76 mm (H) 11.3 inches (V) x 20.1 inches (H)

336.15 mm (V) x 597.6 mm (H) 13.2 inches (V) x 23.5 inches (H)

Synchroni zation

Horizontal Frequency

30~81 kHz

Vertical Frequency

49~75 Hz

Display Color 16.7M (6 bit with Hi-FRC)

Resolution Optimum resolution

1920 x 1080 @ 60 Hz

Maximum resolution

1920 x 1080 @ 60 Hz

Maximum Pixel Clock 164 MHz

Power Supply This product uses 100 to 240V. Refer to the label at the back of the product as the standard voltage can vary in different countries.

Signal connectors USB 3.0, HDMI, D-sub

Dimensions (W x H x D) /

Weight

550.4 x 433.9 x 232.8 mm / 21.7 x 17.1 x 9.2 inches / 4.4 kg / 9.7 Ibs

638.6 x 485.4 x 232.8 mm / 25.1 x 19.1 x 9.2 inches / 5.2 kg / 11.5 Ibs

Environme ntal considerat ions

Operating Operating Temperature : 50F ~ 104F (10C ~ 40C) Humidity : 10 % ~ 80 %, non-condensing

Storage Operating Temperature : -4F ~ 140F (-20C ~ 60C) Humidity : 5% ~ 95%, non-condensing

Plug-and-Play This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if desired.

Panel Dots (Pixels) Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the LCD panel. This does not affect product performance.

LCD panel type 23 (58 cm screen): there are 6,220,800 sub-pixels.

LCD panel type 27 (68 cm screen): there are 6,220,800 sub-pixels.

8510 Specifications

Specifications10

Class B device (broadcast communications device for home use)

This Class B device designed for home use is registered for EMC requirements and can be used in all

regions. (Class B devices emit less electromagnetic radiation than Class A devices)

10.2 PowerSaver

The power-saving function of this product reduces power consumption by switching off the screen and

changing the color of the power LED if the product is not used for a specified period of time. The power

is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or

move the mouse. Power-savign mode only functions when the product is connected to a PC with a

power-saving function.

C23A750X

C27A750X

The displayed power consumption level can vary in different operating conditions or when settings are changed.

To reduce the power consumption to 0 watts, turn off the power switch on the back of the product or disconnect the power cable. Be sure to disconnect the power cable when you will not be using the product for an extended period of time. To reduce the power consumption to 0 watts when the power switch is not available, disconnect the power cable.

(USA Only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect Or call, (877) 278 - 0799

PowerSaver Normal Operation Power saving mode Power off

(Power button)

Power Indicator On Blinking Amber

Power Consumption 33.6 W 0.3 W

PowerSaver Normal Operation Power saving mode Power off

(Power button)

Power Indicator On Blinking Amber

Power Consumption 43.8W 0.3 W

1W or lower

1W or lower

8610 Specifications

Specifications10

10.3 Standard Signal Mode Table

This product can be set to only one resolution for each screen size to obtain the optimum picture quality

due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade

the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for

the screen size of your product.

If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will

automatically be adjusted. If the signal transmitted from the PC does not belong to the standard signal

modes, the screen may be blank with the power LED on. In such a case, change the settings according

to the following table by referring to the graphics card user manual.

Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz.

Vertical Frequency Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.

Resolution Horizontal Frequency

(kHz)

Vertical Frequency

(Hz)

Pixel Clock (MHz)

Sync Polarity (H/V)

VESA, 640 x 480 31.469 59.940 25.175 -/-

VESA, 800 x 600 35.156 56.250 36.000 +/+

VESA, 800 x 600 37.879 60.317 40.000 +/+

VESA, 1024 x 768 48.363 60.004 65.000 -/-

VESA, 1280 x 800 49.702 59.810 83.500 -/+

VESA, 1280 x 960 60.000 60.000 108.000 +/+

VESA, 1280 x 1024 63.981 60.020 108.000 +/+

VESA,1440 x 900 55.935 59.887 106.500 -/+

VESA,1600 x 1200 75.000 60.000 162.000 +/+

VESA,1680 x 1050 65.290 59.954 146.250 -/+

VESA,1920 x 1080 67.500 60.000 148.500 +/+

8710 Specifications

Specifications10

10.4 PC Dongle Specification (UWB : Ultra Wide Band)

Standard UWB

Host Interface USB 2.0 Downstream Interface

Frequency Range 3.1GHz ~ 10.6Ghz (Operating 3.16GHz ~ 8.97Ghz, BG1, BG2, BG6)

Security AES128

Data Rate 53.3 to 480 Mbps

Sensitivity / Output Power Transmitted signal PSD -41.3 dBm/MHz

(Regulatory limit is -41.3dBm/Mhz)

Power Consumption 1.18Watt (Typical), Receiving 4095 length packet, TFC1, Band Group 3,

480 Mbps.

Supported Models C24A650X, C27A650X, C24A650U, C27A650U, C23A750X, C27A750X

Dimension 7 mm x 19 mm x 24.5 mm

8810 Specifications

A

ppendix

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG

customer care center.

NORTH AMERICA

CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com

MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com

U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com

LATIN AMERICA

ARGENTINA 0800-333-3733 http://www.samsung.com

BRAZIL 0800-124-421 4004-0000 http://www.samsung.com

CHILE 800-SAMSUNG (726-7864) http://www.samsung.com

COLOMBIA 01-8000112112 http://www.samsung.com

COSTA RICA 0-800-507-7267 http://www.samsung.com

DOMINICA 1-800-751-2676 http://www.samsung.com

ECUADOR 1-800-10-7267 http://www.samsung.com

EL SALVADOR 800-6225 http://www.samsung.com

GUATEMALA 1-800-299-0013 http://www.samsung.com

HONDURAS 800-27919267 http://www.samsung.com

JAMAICA 1-800-234-7267 http://www.samsung.com

NICARAGUA 00-1800-5077267 http://www.samsung.com

PANAMA 800-7267 http://www.samsung.com

PERU 0-800-777-08 http://www.samsung.com

PUERTO RICO 1-800-682-3180 http://www.samsung.com

TRINIDAD & TOBAGO 1-800-SAMSUNG (726-7864) http://www.samsung.com

VENEZUELA 0-800-100-5303 http://www.samsung.com

ASIA PACIFIC

AUSTRALIA 1300 362 603 http://www.samsung.com

NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com

CHINA 400-810-5858 http://www.samsung.com

89 Appendix

Appendix

HONG KONG (852) 3698 4698 http://www.samsung.com/hk

http://www.samsung.com/ hk_en/

INDIA 3030 8282, 1800 3000 8282 http://www.samsung.com

INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung.com

JAPAN 0120-327-527 http://www.samsung.com

MALAYSIA 1800-88-9999 http://www.samsung.com

PHILIPPINES 1-800-10-SAMSUNG (726-7864) 1-800-3-SAMSUNG (726-7864) 1-800-8-SAMSUNG (726-7864) 02-5805777

http://www.samsung.com

SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com

THAILAND 1800-29-3232 02-689-3232 http://www.samsung.com

TAIWAN 0800-329-999 http://www.samsung.com

VIETNAM 1 800 588 889 http://www.samsung.com

MIDDlE EAST

IRAN 021-8255 http://www.samsung.com

http://www.samservice.com

OMAN 800-SAMSUNG (726-7864) http://www.samsung.com

KUWAIT 183-2255 http://www.samsung.com

BAHRAIN 8000-4726 http://www.samsung.com

EGYPT 08000-726786 http://www.samsung.com

JORDAN 800-22273 http://www.samsung.com

MOROCCO 080 100 2255 http://www.samsung.com

SAUDI ARABIA 9200-21230 http://www.samsung.com

U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com

TURKEY 444 77 11 http://www.samsung.com

AFRICA

NIGERIA 0800 - SAMSUNG (726-7864) http://www.samsung.com

SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung.com

ASIA PACIFIC

90 Appendix

Appendix

Terminology

OSD(On Screen Display)

On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as

required. It allows you to change the screen brightness, tint, size and many other settings using

menus displayed on the screen.

HUB

HUB refers to a device that is a common connection point for multiple devices connected over a

network. It is used to connect multiple PCs, video devices, office devices and/or LANs over a single

network.

Dongle

Dongle refers to a device that connects to an input/output port on a PC. It contains a security key or

ID so that only the user that connects the dongle can access a specified application. The dongle on

this product contains data required to use Wireless USB and must be connected to your PC.

Coarse

Coarse refers to the frequency of radio wave vibrations per second. A higher frequency transmits a

larger amount of data and is reflected easier. A lower frequency traverses obstacles more easily and

can travel farther, but it transmits a smaller amount of data. The Coarse menu allows you to manually

adjust the frequency to obtain the optimum picture quality. Adjust Coarse referring to Standard Signal

Mode Table (page87) according to the performance of your product and enjoy improved picture

quality.

Gamma

The Gamma menu adjusts the grey scale that represents middle tones on the screen. Adjusting the

brightness brightens the whole screen, but adjusting Gamma only brightens the medium brightness.

Grey scale

Scale refers to levels of color intensity that show variations of color change from darker areas to

brighter areas on the screen. Changes to the screen brightness are expressed with black and white

variation, and grey scale refers to the medium area between black and white. Changing the grey scale

through Gamma adjustment will change the medium brightness on the screen.

Scanning rate

Scanning rate, or refresh rate, refers to the frequency of screen refreshes. Screen data is transmitted

as it refreshes to display an image, although the refreshing is invisible to the naked eye. The number of

screen refreshes is called scanning rate and is measured in Hz. A scanning rate of 60Hz means that

91 Appendix

Appendix

the screen refreshes 60 times per second. The screen scanning rate depends on the performance of

the graphics cards in your PC and monitor.

Horizontal Frequency

Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are

transmitted in horizontal lines, which are then arranged vertically to create an image. The horizontal

frequency is measured in kHz and represents how many times horizontal lines per second are

transmitted and displayed on the monitor screen. A horizontal frequency of 85 means that the

horizontal lines that make up an image are transmitted 85 000 times per second, and the horizontal

frequency is indicated in 85kHz.

Vertical Frequency

One image is made of numerous horizontal lines. The vertical frequency is measured in Hz and

represents how many images can be created per second by those horizontal lines. A vertical

frequency of 60 means that an image is transmitted 60 times per second. The vertical frequency is

also called "refresh rate" and affects screen flicker.

Resolution

Resolution is the number of horizontal pixels and vertical pixels that form a screen. It represents the

level of display detail.

A higher resolution displays a greater amount of information on the screen and is suitable for

performing multiple tasks at the same time.

E.g. A resolution of 1920 x 1080 consists of 1,920 horizontal pixels (horizontal frequency) and 1,080

vertical lines (vertical resolution).

Plug & Play

The Plug & Play feature allows the automatic exchange of information between a monitor and PC to

produce an optimum display environment.

The monitor uses VESA DDC (international standard) to execute Plug & Play.

92 Appendix

Index

A About "Central Station" 27

Auto Adjustment 61

Auto Source 73

B Before Connecting 40

Blue 58

Brightness 52

C Checking the Contents 18

Cleaning 3

Coarse 54

Color Tone 59

Configuring Brightness in the Startup Screen 77

Configuring Volume in the Startup Screen 78, 79

Connecting and Using a PC 41

Connecting Headphones 48

Connecting the Product to a PC to Use "Central Station" 28

Connecting to a Video Device 48

Contact SAMSUNG WORLDWIDE 89

Contrast 53

Copyright 2

Correct posture to use the product 12

D Display Time 73

E Eco Saving 70

F Fine 55

G Gamma 60

General 85

Green 57

H HDMI Black Level 56

Horizontal Position 62

HUB 66

I INFORMATION 77

K Key Repeat Time 74

L Language 71

M MAGIC 49

Menu H-Position 64

Menu Transparency 71

Menu V-Position 65

O Off Timer On/Off 75

Off Timer Setting 75

P Parts 21

Index 93

Index

PC/AV Mode 72

PowerSaver 86

Q Q & A 83

R Red 57

Requirements Before Contacting Samsung Customer Service Center 80

Reset 76

Response Time 55

S Safety Precautions 4

Sharpness 53

Size 61

Manualsnet FAQs

If you want to find out how the A750X Series Samsung works, you can view and download the Samsung A750X Series Monitor User Manual on the Manualsnet website.

Yes, we have the User Manual for Samsung A750X Series as well as other Samsung manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Samsung A750X Series. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Samsung A750X Series Monitor User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Samsung A750X Series Monitor User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Samsung A750X Series Monitor User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Samsung A750X Series Monitor User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Samsung A750X Series Monitor User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.