Samsung EC-CL80ZZBPBUS Camera User Manual PDF

This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.

Click a topic

User Manual CL80

Common questions

Quick reference

Contents

Basic functions

Extended functions

Shooting options

Playback/Editing

Wireless network/Bluetooth

Appendixes

Index

1

Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.

Warningsituations that could cause injury to yourself or others

Cautionsituations that could cause damage to your camera or other equipment

Notenotes, usage tips, or additional information

Safety warnings

Do not use your camera near ammable or explosive gases and liquids

Do not use your camera near fuels, combustibles, or ammable chemicals. Do not store or carry ammable liquids, gases, or explosive materials in the same compartment as the camera or its accessories.

Keep your camera away from small children and pets

Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well.

Prevent damage to subjects eyesight

Do not use the ash in close proximity (closer than 1 m/3 ft) to people or animals. Using the ash too close to your subjects eyes can cause temporary or permanent damage.

Handle and dispose of batteries and chargers with care

Use only Samsung-approved batteries and chargers. Incompatible batteries and chargers can cause serious injuries or damage to your camera. Never dispose of batteries in a re. Follow all local regulations when disposing of used batteries. Never place batteries or cameras on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when overheated. Do not use a damaged power supply cord, plug, or loose outlet when charging batteries. This may cause a re or electric shock.

Avoid interference with pacemakers

Maintain a minimum of 15 cm (6 inches) between cameras and pacemakers to avoid potential interference, as recommended by manufacturers and the independent research group, Wireless Technology Research. If you have any reason to suspect that your camera is interfering with a pacemaker or other medical device, turn off the camera immediately and contact the manufacturer of the pacemaker or medical device for guidance.

2

Health and safety information

Do not insert foreign objects into any of your cameras compartments, slots, or access points. Damage due to improper use may not be covered by your warranty. Do not swing your camera by the strap. This may cause injury to yourself or others. Do not paint your camera, as paint can clog moving parts and prevent proper operation. Paint or metal on the outside of the camera may cause allergies, itchy skin, eczema, or swelling for people with sensitive skin. If you have experience any of these symptoms, stop using the camera immediately and consult a doctor.

Protect batteries, chargers, and memory cards from damage

Avoid exposing batteries or memory cards to very cold or very hot temperatures (below 0 C/32 F or above 40 C/104 F). Extreme temperatures can reduce the charging capacity of your batteries and can cause memory cards to malfunction. Prevent batteries from making contact with metal objects, as this can create a connection between the + and terminals of your battery and lead to temporary or permanent battery damage. Also, this may cause a re or electric shock. Prevent memory cards from making contact with liquids, dirt, or foreign substances. If dirty, wipe the memory card clean with a soft cloth before inserting in your camera. Do not allow liquids, dirt, or foreign substances to come in contact with the memory card slot. Doing so may cause the camera to malfunction.

Safety precautions

Handle and store your camera carefully and sensibly

Do not allow your camera to get wetliquids can cause serious damage. Do not handle your camera with wet hands. Water damage to your camera can void your manufacturers warranty. Do not expose the camera to direct sunlight or high temperatures for an extended period of time. Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your cameras internal components. Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated areas to prevent damage to moving parts and internal components. Remove the batteries from your camera when storing it for an extended period of time. Installed batteries may leak or corrode over time and cause serious damage to your camera. Protect your camera from sand and dirt when using it on beaches or in other similar areas. Protect your camera and monitor from impact, rough handling, and excessive vibration to avoid serious damage. Exercise caution when connecting cables or adapters and installing batteries and memory cards. Forcing the connectors, improperly connecting cables, or improperly installing batteries and memory cards can damage ports, connectors, and accessories.

3

Health and safety information

Turn off the camera near medical equipment

Your camera can interfere with medical equipment in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel.

Turn off the camera when in an aircraft

Your camera can cause interference with aircraft equipment. Follow all airline regulations and turn off your camera when directed by airline personnel.

Avoid interference with other electronic devices

Your camera emits radio frequency (RF) signals that may interfere with unshielded or improperly shielded electronic equipment, such as pacemakers, hearing aids, medical devices, and other electronic devices in homes or vehicles. Consult the manufacturers of your electronic devices to solve any interference problems you experience.

Turn off the camera when inserting or removing the memory card. Do not bend, drop, or subject memory cards to heavy impact or pressure. Do not use memory cards that have been formatted by other cameras or by a computer. Reformat the memory card with your camera. Never use a damaged charger, battery, or memory card.

Use only Samsung-approved accessories

Using incompatible accessories may damage your camera, cause injury, or void your warranty.

Protect your cameras lens

Do not expose the lens to direct sunlight, as this may discolor the image sensor or cause it to malfunction. Protect your lens from ngerprints and scratches. Clean your lens with a soft, clean, debris-free lens cloth.

Follow all safety warnings and regulations

Comply with any regulations that restrict the use of a camera in a certain area.

4

Check that the camera is operating properly before use

The manufacturer takes no responsibility for any loss of les or damage that may result from camera malfunction or improper use.

Use your camera in the normal position

Avoid contact with your cameras internal antenna.

Data transferred via WLAN or Bluetooth technology could be leaked, so avoid transferring sensitive data in public areas or on open networks. The camera manufacturer is not liable for any data transfers that infringe on copyrights, trademarks, intellectual property laws, or public decency ordnances.

Important usage information

Allow only qualied personnel to service your camera

Do not allow unqualied personnel to service the camera or attempt to service the camera yourself. Any damage that results from unqualied service is not covered by your warranty.

Ensure maximum battery and charger life

Overcharging batteries may shorten battery life. After charging is nished, disconnect the cable from your camera. Over time, unused batteries will discharge and must be recharged before use. Disconnect chargers from power sources when not in use. Use batteries only for their intended purpose.

Exercise caution when using the camera in humid environments

When transferring the camera from a cold environment to a warm and humid one, condensation can form on the delicate electronic circuitry and memory card. In this situation, wait for at least 1 hour until all moisture has evaporated before using the camera.

Health and safety information

5

Copyright information

Microsoft Windows and the Windows logo are registered trademarks of the Microsoft Corporation. Mac is a registered trademark of the Apple Corporation. HDMI, the HDMI logo and the term High Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Bluetooth and the Bluetooth logo are registered trademarks of the Bluetooth SIG, Inc. and are used by Samsung Electronics Co., Ltd. under license. All other trademarks and product names are owned by their respective owners. Wi-Fi, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance.

Camera specications or contents of this manual may be changed without prior notice due to upgrade of camera functions. We recommend using your camera within a country where you purchase it. For Open Source License information, refer to the OpenSourceInfo.pdf in the provided CD-ROM.

Organization of the user manual

Basic functions 13 Learn about your cameras layout, icons, and basic functions for shooting.

Extended functions 32 Learn how to take a photo by selecting a mode and how to record a video or voice memo.

Shooting options 42 Learn about the options you can set in Shooting mode.

Playback/Editing 66 Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your photo printer, TV, or HDTV.

Wireless network/Bluetooth 94 Learn to use several functions using wireless local area networks (WLANs) and the Bluetooth feature.

Appendixes 111 Refer to settings, error messages, specications, and maintenance tips.

6

Indications used in this manual Shooting mode Indication

Smart Auto S

Auto a

Program p

Scene s

DUAL IS d

Smart Scene Detection D

Movie v

Shooting mode icons

These icons indicate that a function is available in the corresponding modes. The s mode may not support functions for all scenes.

e.g.)

Available in the Program, DUAL IS, Movie, and Smart Scene Detection modes

Icons used in this manual Icon Function

Additional information

Safety warnings and precautions

[ ] Camera buttons; for example: [Shutter] (represents the shutter button)

( ) Page number of related information

The order of options or menus you must select to perform a step; for example: Select > (represents Select >, and then )

* Annotation

Abbreviations used in this manual Abbreviation Denition

ACB Auto Contrast Balance

AEB Auto Exposure Bracket

AF Auto Focus

AP Access Point

DIS Digital Image Stabilization

DLNA Digital Living Network Alliance

DPOF Digital Print Order Format

EV Exposure Value

OIS Optical Image Stabilization

WB White Balance

7

Pressing the shutter

Half-press [Shutter]: press the shutter halfway down Press [Shutter]: press the shutter all the way down

Half-press [Shutter] Press [Shutter]

Subject, background, and composition

Subject: the main object of a scene, such as a person, animal, or still life Background: the objects around the subject Composition: the combination of a subject and background

Subject

Background

Composition

Expressions used in this manual

Exposure (Brightness)

The amount of light that enters your camera determines the exposure. You can alter the exposure with shutter speed, aperture value, and ISO speed. By altering the exposure, your photos will be darker or lighter.

Normal exposure Overexposure (too bright)

8

Common questions You can get answers to common questions. Solve problems easily by setting shooting options.

The subject's eyes appear red.

This is caused by a reection from the camera ash. Set the ash option to Red-eye or Red-eye Fix. (p. 47) If the photo has already been taken, select Red-eye Fix in the edit menu. (p. 82)

Photos have dust spots. Dust particles oating in the air may be captured in photos when using the ash. Turn off the ash or avoid taking photos in a dusty place. Set ISO speed options. (p. 48)

Photos are blurred. This may be caused by taking photos in low light conditions or holding the camera incorrectly. Press [Shutter] halfway down to make sure the subject is focused. (p. 30) Use the d mode. (p. 37)

Photos are blurred when shooting at night.

As the camera tries to let in more light, the shutter speed slows. This can make it difcult to steady the camera and may result in camera shake.

Select Night in the s mode. (p. 36) Turn on the ash. (p. 47) Set ISO speed options. (p. 48) Use a tripod to prevent your camera from shaking.

Subjects come out too dark because of backlighting.

When the light source is behind the subject or when there is a high contrast between the light and dark areas, the subject may come out shaded.

Avoid shooting in front of the sun. Select Backlight in the s mode. (p. 34) Set the ash option to Fill in. (p. 47) Adjust the exposure. (p. 57) Set the Auto Contrast Balance (ACB) option. (p. 58) Set the metering option to Spot if a bright subject is in the center of the frame. (p. 59)

9

Quick reference

Taking photos of people

s mode > Beauty Shot, Portrait, Children 34 Red-eye, Red-eye Fix (to prevent or correct red-eye)

47 Face Detection 52

Taking photos at night or in the dark

s mode > Night, Dawn, Fireworks 34 Flash options 47 ISO speed (to adjust the sensitivity to light) 48

Taking action photos

Continuous, Motion Capture 62

Taking photos of text, insects, or owers

s mode > Close Up, Text 34 Macro, Auto Macro (to take close-up photos) 49 White Balance (to change the color tone) 60

Adjusting the exposure (brightness)

ISO speed (to adjust the sensitivity to light) 48 EV (to adjust exposure) 57 ACB (to compensate for subjects against bright backgrounds) 58 Metering 59 AEB (to take 3 photos of the same scene with different exposures) 62

Applying a different effect

Photo styles (to apply tones) 63 Smart lter effects 64 Image adjustment (to adjust saturation, sharpness, or contrast) 65

Reducing camera shake

Optical Image Stabilization (OIS) 29 d mode 37

Viewing les by category in Smart Album 70 Deleting all les on the memory card 72 Viewing les as a slide show

74 Viewing les on a TV or HDTV

84 Connecting your camera to a computer 86 Adjusting sound and volume

113 Adjusting the brightness of the display 113 Changing the display language 114 Setting the date and time

114 Formatting the memory card

114 Troubleshooting 123

10

Contents Extended functions ........................................................ 32 Shooting modes ................................................................ 33 Using the Smart Auto mode ................................................. 33 Using the Scene mode ........................................................ 34 Using the Beauty Shot mode ................................................ 35 Using the frame guide .......................................................... 36 Adjusting the exposure in the Night mode .............................. 36 Using the DUAL IS mode ..................................................... 37 Using the Program mode ..................................................... 38 Recording a video ............................................................... 38 Using the Smart Scene Detection mode ................................ 40 Recording voice memos ................................................... 41 Recording a voice memo ..................................................... 41 Adding a voice memo to a photo .......................................... 41

Shooting options ............................................................ 42 Selecting a resolution and quality ...................................... 43 Selecting a resolution ........................................................... 43 Selecting image quality ........................................................ 44 Using the timer .................................................................. 45

Basic functions ............................................................... 13 Unpacking ......................................................................... 14 Camera layout ................................................................... 15 Inserting the battery and memory card .............................. 17 Charging the battery and turning your camera on ............. 18 Charging the battery ............................................................ 18 Turning on your camera ........................................................ 18 Performing the initial setup ................................................ 19 Learning icons ................................................................... 21 Using the touch screen ..................................................... 22 Selecting a shooting mode ................................................ 24 Selecting a shooting mode using motion recognition .............. 25 Setting the touch screen and sound ................................. 26 Setting the display type for the touch screen .......................... 26 Setting the sound ................................................................ 26 Taking photos .................................................................... 27 Zooming ............................................................................. 28 Reducing camera shake (OIS) .............................................. 29 Tips for getting a clearer photo .......................................... 30

11

Contents

Shooting in the dark .......................................................... 47 Preventing red-eye .............................................................. 47 Using the ash .................................................................... 47 Adjusting the ISO speed ...................................................... 48 Changing the cameras focus ............................................ 49 Using macro ....................................................................... 49 Using auto focus ................................................................. 49 Using smart touch focus ...................................................... 50 Using one touch shooting .................................................... 51 Adjusting the focus area ....................................................... 51 Using face detection ......................................................... 52 Detecting faces ................................................................... 52 Taking a self portrait shot ...................................................... 53 Taking a smile shot .............................................................. 53 Detecting eye blinking .......................................................... 54 Using smart face recognition ................................................ 54 Registering faces as your favorites (My Star) .......................... 55 Adjusting brightness and color .......................................... 57 Adjusting the exposure manually (EV) .................................... 57 Compensating for backlighting (ACB) .................................... 58 Changing the metering option ............................................... 59 Selecting a light source (White balance) ................................. 60

Using burst modes ............................................................ 62 Improving your photos ...................................................... 63 Applying photo styles ........................................................... 63 Applying smart lter effects ................................................... 64 Adjusting your photos .......................................................... 65

Playback/Editing ............................................................. 66 Playing back ...................................................................... 67 Starting Playback mode ....................................................... 67 Viewing photos ................................................................... 73 Playing a video .................................................................... 75 Playing a voice memo .......................................................... 76 Editing a photo .................................................................. 78 Rotating a photo .................................................................. 78 Resizing photos .................................................................. 78 Applying photo styles ........................................................... 79 Applying smart lter effects ................................................... 80 Applying a special effect ...................................................... 81 Correcting exposure problems ............................................. 81 Editing photos of portraits ..................................................... 82 Creating a print order (DPOF) ................................................ 82 Viewing les on a TV or HDTV ........................................... 84

12

Sending photos via email ................................................ 103 Viewing photos or videos on the DLNA devices .............. 104 Viewing photos or videos on a TV screen ............................ 104 Viewing photos or videos on another device (renderer) ......... 105 Sending or receiving photos or videos with a camera ..... 107 Sending photos or videos to another camera ....................... 107 Receiving photos or videos from another camera ................. 107 Sending photos via Bluetooth ......................................... 109

Appendixes ................................................................... 111 Settings menu ................................................................. 112 Accessing the settings menu .............................................. 112 Sound settings .................................................................. 113 Display settings ................................................................. 113 Camera settings ................................................................ 114 Error messages ............................................................... 117 Camera maintenance ...................................................... 118 Cleaning your camera ........................................................ 118 About memory cards ......................................................... 119 About the battery ............................................................... 120 Before contacting a service center .................................. 123 Camera specications ..................................................... 126 FCC notice ...................................................................... 130 Index ............................................................................... 131

Transferring les to your computer (for Windows) .............. 86 Transferring les using Intelli-studio ........................................ 87 Transferring les by connecting the camera as a removable disk .................................................................................... 89 Disconnecting the camera (for Windows XP) .......................... 90 Transferring les to your computer (for Mac) ...................... 91 Printing photos with a photo printer (PictBridge) ............... 92

Wireless network/Bluetooth .......................................... 94 Connecting to a WLAN and conguring network settings . 95 Connecting to a WLAN automatically .................................... 95 Connecting to a WLAN manually .......................................... 96 Network connection tips ...................................................... 97 Storing your information ....................................................... 98 Storing email addresses ....................................................... 98 Setting the le size to share .................................................. 99 Conguring the WPS setting ................................................. 99 Setting a password ............................................................. 99 Changing the password ..................................................... 100 Checking information ......................................................... 100 Entering text ...................................................................... 100 Using photo or video sharing websites ............................ 101 Accessing a website .......................................................... 101 Uploading photos or videos ................................................ 102

Contents

Unpacking 14

Camera layout 15

Inserting the battery and memory card 17

Charging the battery and turning your camera on 18 Charging the battery 18 Turning on your camera 18

Performing the initial setup 19

Learning icons 21

Using the touch screen 22

Selecting a shooting mode 24 Selecting a shooting mode using motion recognition 25

Setting the touch screen and sound 26 Setting the display type for the touch screen 26 Setting the sound 26

Taking photos 27 Zooming 28 Reducing camera shake (OIS) 29

Tips for getting a clearer photo 30

Basic functions Learn about your cameras layout, icons, and basic functions for shooting.

Basic functions 14

Unpacking Check your product box for the following items.

Camera AC adapter/USB cable (AD44-00143A)/(AD39-00165A)

Rechargeable battery (4302-001226)

Strap (Sliver: AD63-02596A/ Black: AD63-02604A)

User Manual CD-ROM (AD46-00309A)

Quick Start Manual (AD68-04779A)

Cradle (AD97-18838A)

Touch pen (AD75-00070A)

Optional accessories

Camera case Memory card (microSDTM)

A/V cable (AD39-00146A)

Battery charger (AD44-00164A)

HDMI cable (AD39-00179A)

The illustrations may differ from your actual items.

Basic functions 15

Camera layout Before you start, familiarize yourself with your camera's parts and their functions.

Shutter button POWER button

Lens

Flash AF-assist light/timer lamp

Microphone

Battery chamber cover Insert a memory card and battery

Tripod mount

Speaker

Internal antenna* * Avoid contact with the internal

antenna while using the wireless network.

Basic functions 16

Camera layout

Status lamp Blinking: When saving a photo or video, being read by a computer or printer, out of focus, connecting to a WLAN, sending a photo, or turning on the Bluetooth feature Steady: When connecting to a computer or in focus

Zoom button Zoom in or out Zoom in on part of a photo or view les as thumbnails

Playback button

Touch screen 1

2

HDMI port Accepts HDMI cable

USB and A/V port Accepts USB cable or A/V cable

Basic functions 17

Inserting the battery and memory card Learn to insert the battery and an optional microSDTM memory card into the camera.

Removing the battery and memory card

Push gently until the card disengages from the camera and then pull it out of the slot.

Push the lock up to release the battery.

The internal memory can be used as a temporary storage device when the memory card is not inserted.

Memory card

Battery

Battery lock

Insert a memory card with the gold-colored contacts

facing up.

Insert the battery with the Samsung logo facing down.

Basic functions 18

Charging the battery and turning your camera on

Turning on your camera Press [POWER] to turn your camera on or off.

The initial setup screen appears when you turn on the camera for the rst time. (p. 19)

Turning on your camera in Playback mode Press [Playback]. The camera turns on and accesses Playback mode immediately.

When you turn on your camera by pressing and holding [Playback] for about 5 seconds, the camera does not emit any camera sounds.

Charging the battery Before using the camera for the rst time, you must charge the battery. Attach the USB cable to the AC adapter and then plug the end of cable with the indicator light into your camera.

Indicator light Red: Charging Green: Fully charged

Basic functions 19

Performing the initial setup The initial setup screen appears to allow you to congure the camera's basic settings.

Select a time zone and select 4 . To set the daylight-saving time, select .

Select 5 Date & Time (Date & Time).

Set the date and time, select a date format, and select 6 .

Select 1 Language.

Select a language.2 Select 3 Time Zone (Time Zone).

Basic functions 20

Performing the initial setup

Select 7 Calibration (Calibration).

Tap the target on the screen with your touch pen.8

Calibration

Tap directly in the center of the target for optimal performance.

Select 9 to switch to the Shooting mode.

Basic functions 21

Icon Description

l

: Motion recognition

N: Network and Bluetooth menus

M: Shooting options and settings menu

f

Image setting options : Exposure value

: White balance

: ISO speed

: Face tone

: Face retouch

: Focus area option

: Face detection option

: Smart face recognition edit option

: Photo resolution

: Video resolution

: Photo quality

: Frame rate

: Exposure with ACB

: Metering option

: Burst type

: Photo styles

: Smart lter effect

: Image adjustment (sharpness, contrast, saturation)

: Long time shutter

: Optical Image Stabilization (OIS)

: Audio recording

<>: Another row of options

Learning icons The icons displayed will change according to the mode you select or the options you set.

A. Status icons Icon Description

p Shooting mode

Aperture and shutter speed

Photo resolution

Video resolution

Metering

Optical Image Stabilization (OIS)

Frame rate

Exposure value

ISO speed

White balance

Face detection

Burst mode

Image adjustment (sharpness, contrast, saturation)

Icon Description

Photo styles

Smart lter effect

Available number of photos

Available recording time

Internal memory

Memory card inserted

: Fully charged

: Partially charged

: Charging needed

Zoom ratio

Voice memo

Auto focus frame

Camera shake

Option set 1 (of 4)

Current date and time

Grid lines

B. Option icons (touch) Icon Description

Flash option

Auto focus option

Timer option

Display type

B

A

Basic functions 22

Using the touch screen Learn basic actions to use the touch screen. Use the supplied touch pen to touch or drag on the screen.

Touching Touch an icon to select a menu or option.

Dragging Drag left or right to scroll horizontally.

-2 -1 0 +2+1

EV

Do not use other sharp objects, such as pens or pencils, to touch the screen. Doing so may damage the screen.

When you touch or drag on the screen, discolorations will occur. It is not a malfunction but a characteristic of the touch screen. Touch or drag lightly to reduce these annoying effects. The touch screen may not recognize your touches correctly when:

you touch multiple items at the same time - you use the camera in high humidity environments - you use the camera with an LCD protection lm or another LCD - accessory

If you touch the screen with your nger, the screen may not recognise your input. If you perform no operations for few seconds, the screen will dim to save battery life.

Basic functions 23

Using the touch screen

Using gestures Perform certain functions by drawing commands on the touch screen.

Gesture Description

Draw a horizontal bar to right or left to view the next or previous le.

Draw an X to delete a photo.

Draw a circle to rotate a photo.

Basic functions 24

Selecting a shooting mode Learn how to select a shooting mode. Your camera provides you with various modes for shooting.

Mode Description

S Smart Auto: Take a photo by letting the camera select a scene mode as it detects. (p. 33)

a Auto: Take a photo quickly and easily with minimal settings. (p. 27)

p Program: Take a photo by setting options. (p. 38)

s Scene: Take a photo with options preset for a specic scene. (p. 34)

d DUAL IS: Take a photo with options suitable for reducing camera shake. (p. 37)

D Smart Scene Detection: Record a video by letting the camera select a scene mode as it detects. (p. 40)

v Movie: Record a video. (p. 38)

Select the mode icon.1

Select a mode.2

Basic functions 25

Selecting a shooting mode

Access the Smart Auto mode (p. 33)

Motion recognition may not work well if you hold the camera parallel to the ground, as shown below.

Selecting a shooting mode using motion recognition Your camera features a built-in motion sensor that allows you to quickly switch the shooting mode by tilting the camera.

In Shooting mode, tilt the camera while touching and holding .

Access the Movie mode (p. 38)

Access the Program mode (p. 38)

Basic functions 26

Setting the touch screen and sound Learn how to change the basic settings for the touch screen and sound according to your preferences.

Setting the sound Set whether your camera emits a specied sound when you operate your camera.

In Shooting or Playback mode, select 1 M.

Select 2 Beep Sound.

Select an option.3 Option Description

Off The camera does not emit any sounds.

On The camera emits sounds.

Select 4 to return to the previous mode.

Setting the display type for the touch screen

In Shooting mode, select 1 . (In Playback mode, select .)

Select an option.2

Full

Option Description

Full: Display the name of an option when you select an icon.

Basic: Display icons without the name of an option. This option is available only in Playback mode.

Hide: Hide icons on the screen if you perform no operations for 3 seconds (touch the screen to display icons again).

Guide Line: Display grid lines. The grid lines are helpful for getting the photo aligned with a surface, such as the horizon or the edges of buildings. This option is available only in Shooting mode.

Basic functions 27

Taking photos Learn basic actions to take photos easily and quickly in the Auto mode.

Make sure that the camera is in the 1 a mode (Auto), the cameras default shooting mode.

If not, select the mode icon a.

Align your subject in the frame.2

Half-press [3 Shutter] to focus. A green frame means the subject in focus.

Press [4 Shutter] to take a photo.

See page 30 for tips to get clearer photos.

Basic functions 28

Taking photos

Zooming You can shoot close-up photos by adjusting the zoom. Your camera has a 7X optical zoom and 5X digital zoom. By using both, you can zoom in up to 35 times.

Rotate [Zoom] right to zoom in on your subject. Rotate [Zoom] left to zoom out.

Zoom inZoom out

Zoom ratio

The zoom ratio available for videos differs.

Digital zoom If the zoom indicator is in the digital range, your camera is using the digital zoom. The picture quality may deteriorate when you use the digital zoom.

Optical range

Zoom indicator

Digital range

The digital zoom is not available when using S, d, s (in some scenes), v, and D modes and when used with Face Detection, and Smart Filter. It may take longer to save a photo when using the digital zoom.

Basic functions 29

Taking photos

OIS may not function properly when: you move your camera to follow a moving subject - you use digital zoom - there is too much camera shake - the shutter speed is slow (e.g., when you select - Night in the s mode) the battery is low - you take a close-up shot -

If you use the OIS function with a tripod, your images may be blurred by the vibration of the OIS sensor. Deactivate the OIS function when you use a tripod. If the camera is impacted, the display will be blurry. In this case, turn off the camera and turn it on again to use the OIS function correctly. In some scene modes, the OIS function is unavailable.

Reducing camera shake (OIS) Reduce camera shake optically in Shooting mode.

Before correction After correction

In Shooting mode, select 1 f > (once or twice) .

Select an option.2 Option Description

Off: Deactivate the OIS function.

On: Activate the OIS function.

apsvD

Basic functions 30

Holding your camera correctly

Make sure nothing is blocking the lens.

Half-pressing the shutter button

Half-press [Shutter] and adjust the focus. Focus and exposure will be adjusted automatically.

The aperture value and shutter speed are automatically set.

Focus frame Press [Shutter] to take the photo if displayed in green. Change the frame and half-press [Shutter] again if displayed in red.

Reducing camera shake

Set the Optical Image Stabilization option to reduce camera shake optically. (p. 29) Select the d mode to reduce camera shake both optically and digitally. (p. 37)

When h is displayed

Camera shake

When shooting in the dark, avoid setting the ash option to Slow Sync or Off. The aperture remains open longer and it may be harder to hold the camera still.

Use a tripod or set the ash option to Fill in. (p. 47) Set ISO speed options. (p. 48)

Tips for getting a clearer photo

Basic functions 31

Preventing your subject from being out of focus

It may be difcult to get your subject in focus when: there is little contrast between the subject and background - (When your subject is wearing a color of clothing that is similar to the background) the light source behind the subject is too bright - the subject is shiny - the subject includes horizontal patterns, such as blinds - the subject is not positioned in the center of the frame -

Use the focus lock Half-press [Shutter] to focus. When the subject is in focus, you can reposition the frame to change the composition. When you are ready, press [Shutter] to take your photo.

When you take photos in low light

Turn on the ash. (p. 47)

When subjects are moving fast

Use the continuous or motion capture function. (p. 62)

Shooting modes 33 Using the Smart Auto mode 33 Using the Scene mode 34 Using the Beauty Shot mode 35 Using the frame guide 36 Adjusting the exposure in the Night mode 36 Using the DUAL IS mode 37 Using the Program mode 38 Recording a video 38 Using the Smart Scene Detection mode 40

Recording voice memos 41 Recording a voice memo 41 Adding a voice memo to a photo 41

Extended functions Learn how to take a photo by selecting a mode and how to record a video or voice memo.

Extended functions 33

Shooting modes Take photos or record videos by selecting the best shooting mode for the conditions.

Icon Description

Appears when taking portraits at night.

Appears when taking photos of landscapes with backlighting.

Appears when taking portraits with backlighting.

Appears when taking portraits.

Appears when taking close-up photos of objects.

Appears when taking close-up photos of text.

Appears when taking photos of sunsets.

Appears when taking photos of clear skies.

Appears when taking photos of forested areas.

Appears when taking close-up photos of colorful subjects.

Appears when taking close-up portraits of people.

Appears when the camera and subject are stable for a while. This is available only when you are shooting in the dark.

Appears when taking photos of actively moving subjects.

Appears when taking photos of reworks. This is available only when you use a tripod.

Using the Smart Auto mode In this mode, your camera automatically chooses the appropriate camera settings based on a detected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes.

In Shooting mode, select 1 a S.

Align your subject in the frame.2 The camera selects a scene automatically. An appropriate mode icon will appear at the top left of the screen.

Icon Description

Appears when taking photos of landscapes.

Appears when taking photos of bright white backgrounds.

Appears when taking photos of landscapes at night. This is available only when the ash is off.

Extended functions 34

Shooting modes

Using the Scene mode Take a photo with options preset for a specic scene.

In Shooting mode, select 1 a s.

Select a scene.2

Scene

This mode allows you to choose an appropriate scene for a variety of situations.

For the Beauty Shot mode, see Using the Beauty Shot mode on page 35. For the Frame Guide mode, see Using the frame guide on page 36. For the Night mode, see Adjusting the exposure in the Night mode on page 36.

Align your subject in the frame and half-press [3 Shutter] to focus.

Press [4 Shutter] to take the photo.

Half-press [3 Shutter] to focus.

Press [4 Shutter] to take the photo.

If the camera does not recognize a proper scene mode, S will not change and the default settings will be used. Even if there is a face detected, the camera may not select a portrait mode depending on the subject's position or lighting. The camera may not select the correct scene depending on shooting environments, such as camera shake, lighting and distance to the subject. Even if you use a tripod, the mode may not be detected depending on the subject's movement.

Extended functions 35

Shooting modes

To hide facial imperfections, select 3 f an option.

Select a higher setting to hide a greater number of imperfections.

Level 3

Align your subject in the frame and half-press [4 Shutter] to focus.

Press [5 Shutter] to take the photo.

The focus distance will be set to Auto Macro.

Using the Beauty Shot mode Take a photo of a person with options to hide facial imperfections.

In Shooting mode, select 1 a s .

To make the subject's skin tone appear lighter (face 2 only), select f an option.

Select a higher setting to make skin tone appear lighter.

Level 2

Extended functions 36

Shooting modes

Adjusting the exposure in the Night mode In the Night mode, you can catch brief ashes of light as curved streaks by extending the exposure. Use a slow shutter speed to extend the time until the shutter closes. Increase the aperture value to prevent overexposure.

In Shooting mode, select 1 a s .

Select 2 f Aperture.

Aperture Shutter Speed

Select an option.3

Using the frame guide When you want another person to take a photo of you, you can compose the scene with the frame guide feature. The frame guide will help the other person take a photo of you by showing the part of the pre-composed scene.

In Shooting mode, select 1 a s .

Align your subject in the frame and press [2 Shutter]. Transparent guides will appear on the left and right of the frame.

Cancel Frame: Back

Ask another person to take a photo.3 The person must align the subject in the frame by using the guides, and then press [Shutter] to take the photo.

To cancel the guides, select 4 .

Extended functions 37

Shooting modes

Using the DUAL IS mode Reduce camera shake and prevent blurred photos with Optical and Digital Image Stabilization functions.

Before correction After correction

In Shooting mode, select 1 a d.

Align your subject in the frame and half-press [2 Shutter] to focus.

Press [3 Shutter] to take the photo.

The digital zoom will not work in this mode. The camera will correct photos optically only when you take them with a light source that is brighter than uorescent light. If your subject is moving rapidly, the photo may be blurry. Set the Optical Image Stabilization option to reduce camera shake in different shooting modes. (p. 29)

Select 4 f Shutter Speed.

1.0 2.0 4.0 8.0 16.0

Shutter Speed

Aperture

Select a value to adjust the shutter speed and select 5 .

Align your subject in the frame and half-press [6 Shutter] to focus.

Press [7 Shutter] to take the photo.

Use a tripod to prevent your photos from blurring.

Extended functions 38

Shooting modes

Recording a video Record videos of up to 20 minutes in length in high denition. The recorded video is saved as an H.264 (MPEG-4.AVC) le.

H.264 (MPEG-4 part10/AVC) is a high-compression video format established by international standard organizations ISO/IEC and ITU-T. When the Optical Image Stabilization ( ) is activated, your video may be recorded with the OIS operation sound. The zoom sound may be recorded if you use the zoom while recording a video.

In Shooting mode, select 1 a v.

Select 2 f a frame rate (the number of frames per second).

As the number of frames increases, action appears more natural, but the le size is increased.

30 FPS

is available only when the video resolution is 320 X 240.

Using the Program mode Set various options (except for shutter speed and aperture value) in the Program mode.

In Shooting mode, select 1 a p.

Set options. (For a list of options, refer to 2 Shooting options.)

Align your subject in the frame and half-press [3 Shutter] to focus.

Press [4 Shutter] to take the photo.

Extended functions 39

Shooting modes

To pause recording The camera allows you to pause temporarily while recording a video. With this function, you can record your favorite scenes as a single video.

Select to pause while recording. Select to resume.

Stop: Shutter

Select 3 > a sound option. Option Description

Off: Record a video without sound.

On: Record a video with sound.

Zoom Mute: Record a video without sound while zooming.

Set other options as desired. (For options, refer to 4 Shooting options.)

Press [5 Shutter] to start recording.

Press [6 Shutter] again to stop recording.

Extended functions 40

Shooting modes

Press [3 Shutter] to start recording.

Press [4 Shutter] again to stop recording.

If the camera does not recognize a proper scene mode, D will not change and the default settings will be used. The camera may not select the correct scene depending on shooting environments, such as camera shake, lighting and distance to the subject.

Using the Smart Scene Detection mode In this mode, your camera automatically chooses the appropriate camera settings based on a detected type of scene.

In Shooting mode, select 1 a D.

Align your subject in the frame.2 The camera selects a scene automatically. An appropriate mode icon will appear at the top left of the screen.

Icon Description

Appears when recording videos of landscapes.

Appears when recording videos of clear skies.

Appears when recording videos of forested areas.

Appears when recording videos of sunsets.

Extended functions 41

Recording voice memos Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of shooting conditions.

You will get the best sound quality when recording 40 cm away from the camera.

apsd

Adding a voice memo to a photo

In Shooting mode, select 1 f . (In some modes, select f > (repeatedly) .)

Memo

Align your subject in the frame and take a photo.2 You will begin recording a voice memo right after taking the photo.

Record a short voice memo (10 seconds maximum).3 Press [Shutter] to stop recording a voice memo.

Recording a voice memo

In Shooting mode, select 1 f . (In some modes, select f > (repeatedly) .)

Record

Press [2 Shutter] to record. Select to pause and to resume. The available recording time will be displayed on the top of the screen. You can record voice memos of up to 10 hours in length.

Press [3 Shutter] to stop.

Select 4 to switch to Shooting mode.

Selecting a resolution and quality 43 Selecting a resolution 43 Selecting image quality 44

Using the timer 45

Shooting in the dark 47 Preventing red-eye 47 Using the ash 47 Adjusting the ISO speed 48

Changing the cameras focus 49 Using macro 49 Using auto focus 49 Using smart touch focus 50 Using one touch shooting 51 Adjusting the focus area 51

Using face detection 52 Detecting faces 52 Taking a self portrait shot 53 Taking a smile shot 53

Detecting eye blinking 54 Using smart face recognition 54 Registering faces as your favorites (My Star) 55

Adjusting brightness and color 57 Adjusting the exposure manually (EV) 57 Compensating for backlighting (ACB) 58 Changing the metering option 59 Selecting a light source (White balance) 60

Using burst modes 62

Improving your photos 63 Applying photo styles 63 Applying smart lter effects 64 Adjusting your photos 65

Shooting options Learn about the options you can set in Shooting mode.

Shooting options 43

Selecting a resolution and quality Learn how to change the image resolution and quality settings.

Option Description

4320 X 3240: Print on A1 paper.

4000 X 3000: Print on A1 paper.

3984 X 2656: Print on A2 paper in wide ratio (3:2).

3840 X 2160: Print on A2 paper in panorama ratio (16:9) or play back on an HDTV.

3264 X 2448: Print on A3 paper.

2560 X 1920: Print on A4 paper.

2048 X 1536: Print on A5 paper.

1920 X 1080: Print on A5 paper in panorama ratio (16:9) or play back on an HDTV.

1024 X 768: Attach to an email.

Selecting a resolution As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the le size will also increase.

When taking a photo:

In Shooting mode, select 1 f > . (In some modes, select f .)

Select an option.2

3840 X 2160

SapsdvD

Shooting options 44

Selecting a resolution and quality

When recording a video:

In the 1 v and D modes, select f .

Select an option.2

1280 X 720 HQ

Option Description

1280 X 720 HQ: Play back high-quality les on an HDTV.

1280 X 720: Play back on an HDTV.

640 X 480: Play back on a general TV.

320 X 240: Post on a web page.

For Sharing: Post on a website using the wireless network (30 seconds maximum).

Selecting image quality Photos you take are compressed and saved in JPEG format. Higher quality images will result in larger sizes.

In Shooting mode, select 1 f > . (In some modes, select f .)

Select an option.2

Fine

Option Description

Super Fine

Fine

Normal

apsd

Shooting options 45

Using the timer Learn how to set the timer to delay shooting.

SapsdvD

Press [3 Shutter] to start the timer. The AF-assist light/timer lamp blinks. The camera will automatically take a photo at the specied time.

Select the timer icon or press [Shutter] to cancel the timer. Depending on the selected face defection option, the timer is not available or some timer options are not available.

In Shooting mode, select 1 .

Select an option. 2

Off

Option Description

Off: The timer is not active.

10 Sec: Take a photo in 10 seconds.

2 Sec: Take a photo in 2 seconds.

Double: Take a photo in 10 seconds and take another in 2 seconds.

Motion Timer: Detect your movement and then take a photo. (p. 46)

The options may differ depending on the shooting mode.

Shooting options 46

Using the timer

Pose for your photo while the AF-assist light/timer lamp 5 is blinking.

The AF-assist light/timer lamp will stop blinking just before the camera automatically takes a photo.

The motion timer may not work when:

you are more than 3 m away from the camera your movements are too subtle there is too much light or backlight

Using the motion timer

In Shooting mode, select 1 .

Press [2 Shutter].

Stand within 3 m from the camera within 6 seconds after 3 pressing [Shutter].

Make a motion, such as waving your arms, to activate 4 the timer.

The AF-assist light/timer lamp will start to blink rapidly when the camera detects you.

The detection range of the motion timer

Shooting options 47

Shooting in the dark Learn how to take photos at night or in low light conditions.

Using the ash Use the ash when taking photos in the dark or when you need more light on your photos.

In Shooting mode, select 1 .

Select an option.2

Auto

Option Description

Off: The ash will not re. Camera shake warning ( ) will be displayed when shooting in low light.

Auto: The camera will select a proper ash setting for the detected scene in the S mode.

Auto: The ash res automatically when the subject or background is dark.

SapsPreventing red-eye If the ash res when you take a photo of a person in the dark, a red glow may appear in the eyes. To prevent this, select Red-eye or Red-eye Fix. Refer to ash options in Using the ash.

aps

Shooting options 48

Shooting in the dark

Adjusting the ISO speed The ISO speed is the measure of a lms sensitivity to light as dened by the International Organization for Standardization (ISO). The higher ISO speed you select, the more sensitive to light your camera becomes. With a higher ISO speed, you can get a better photo without using the ash.

In Shooting mode, select 1 f .

Select an option.2 Select to use an appropriate ISO speed based on the brightness of the subject and lighting.

Auto

The higher ISO speed you select, the more image noise you may get.

pOption Description

Red-eye*: The ash res when the subject or background is dark. The camera reduces red-eyes.

Fill in: The ash always res. Light intensity is adjusted automatically.

Slow Sync: The ash res and the shutter stays open longer. Select this when you want to capture ambient light to reveal more details in the background. Use a tripod to prevent your photos from blurring.

Red-eye Fix*: The ash res when the subject or background is dark. The camera corrects red-eyes through its advanced software analysis.

The options may differ depending on the shooting mode. * There is an interval between two bursts of the ash. Do not move until

the ash res a second time.

Flash options are not available if you set burst options or select Blink Detection or Self-Portrait. Make sure that your subjects are within the recommended distance from the ash. (p. 126) If there is reected light or much dust in the air, tiny spots may appear on your photo.

Shooting options 49

Changing the cameras focus Learn how to adjust the camera's focus according to your subjects.

Using auto focus To take sharp photos, select the appropriate focus according to your distance from the subject.

In Shooting mode, select 1 .

Select an option.2

Normal (AF)

Option Description

Normal (AF): Focus on a subject farther than 80 cm (farther than 150 cm when using zoom).

Auto Macro: Focus on a subject farther than 5 cm (farther than 70 cm when using zoom).

Macro: Focus on a subject 5 - 80 cm (70 - 150 cm when using zoom).

The options may differ depending on the shooting mode.

apdvDUsing macro Use macro to take close-up photos of subjects, such as owers or insects. Refer to macro options in Using auto focus.

Try to hold the camera very still to prevent blurry photos. Turn off the ash if the distance to the subject is less than 40 cm.

apdvD

Shooting options 50

Changing the cameras focus

If you do not touch any area on the screen, the focus frame will appear in the center of the screen. Tracking a subject may fail when:

the subject is too small or the subject moves - the subject is backlit or you are shooting in a dark place - colors or patterns on the subject and the background are the same - the camera shakes excessively -

In these cases, the focus frame will appear as a white single-line frame. If the camera fails to track the subject, you must reselect the subject to track. If the camera fails to x the focus, the focus frame will change to a red single-line frame. If you use this function, you cannot set face detection, photo style options, and smart lter effects.

Using smart touch focus Smart Touch AF allows you to track and auto focus on your subject, even when you are moving.

In Shooting mode, select 1 f .

Touch the subject you want to track in the touch area 2 (indicated by a frame).

A focus frame will appear on the subject and will follow the subject as you move the camera.

The white frame means that your camera is tracking the subject. The green frame means that your subject is in focus when you half-press [Shutter].

apsd

Shooting options 51

Changing the cameras focus

Adjusting the focus area You can get clearer photos by selecting an appropriate focus area according to your subjects location in the scene.

In Shooting mode, select 1 f .

Select an option.2

Center AF

Option Description

Center AF: Focus on the center (suitable when subjects are located in the center).

Multi AF: Focus on one or more of 9 possible areas.

One Touch Shooting: Focus on the subject by touching the image on the screen. Touch and hold the subject to take the photo.

Smart Touch AF: Focus on and track the subject that you touch on the screen. (p. 50)

The options may differ depending on the shooting mode.

apsdUsing one touch shooting You can focus on your subject and take a photo with a touch of your nger.

In Shooting mode, select 1 f .

Touch a subject to focus.2 Touch and hold the subject to take the photo.3

Touch and hold until the level indicator lls up.

When you use face detection, you should touch and hold the image of detected face. If you touch and hold any other area, the frame to detect faces will change to a normal frame. If you use this function, you cannot set burst options, photo style options, and smart lter effects.

apsd

Shooting options 52

Using face detection If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Take photos quickly and easily by using Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them.

apsd

Detecting faces Your camera automatically detects human faces (up to 10 human faces).

In Shooting mode, select f . The nearest face appears in a white focus frame and the rest of the faces appear in gray focus frames.

The closer you are to the subject, the quicker your camera will detect faces. If you want to focus faces in gray focus frames, touch them to focus. When you use the burst option, the detected faces may not be registered.

In some scene modes, face detection is unavailable. Face detection may not be effective when:

the subject is far from the camera (The focus frame will appear - orange for Smile Shot and Blink Detection) it is too bright or too dark - the subject is not facing the camera - the subject is wearing sunglasses or a mask - the subject is in backlighting or the lighting condition is unstable - the subjects facial expression changes remarkably -

Face detection is not available when using a photo style or a smart lter effect. When you use the face detection option, the digital zoom will not work. Depending on the selected face detection option, the timer is not available or some timer options are not available. Depending on the selected face detection option, some burst options are not available. When you take photos of detected faces, they will be registered in the face list. You can view registered faces in order of priority in Playback mode. (p. 69) Even though faces are registered successfully, they may not be classied in Playback mode. The detected face in Shooting mode may not appear in the face list or Smart Album.

Shooting options 53

Using face detection

Taking a smile shot The camera automatically releases the shutter when it detects a smiling face.

In Shooting mode, select f . When your subject smiles broadly, your camera can detect the smile more easily.

Taking a self portrait shot Take photos of yourself. The focus distance will be set to close- up and your camera will emit a beep.

In Shooting mode, select 1 f .

When you hear a quick beep, press [2 Shutter].

To turn the beep on or off, select Self-Portrait in the sound settings. (p. 113)

Shooting options 54

Using face detection

Using smart face recognition The camera automatically registers faces that you frequently photograph. This feature will automatically prioritize the focus on those faces and favorite faces. This feature is available only when you use a memory card.

In Shooting mode, select f . The nearest face appears in a white focus frame and the rest of the faces appear in gray focus frames.

: Indicate favorite faces (To register favorite faces, see page 55).

: Indicate faces that the camera automatically registers.

Detecting eye blinking If your camera detects closed eyes, it will automatically take 2 photos in succession.

In Shooting mode, select f .

Hold your camera still while Capturing is displayed on the screen. When blink detection fails, Picture taken with eyes closed. message appears. Take another photo.

Shooting options 55

Using face detection

Registering faces as your favorites (My Star) You can register your favorite faces to prioritize the focus and exposure on those faces. This feature is available only when you use a memory card.

In Shooting mode, select 1 f > . (In some modes, select f .)

Align your subjects face with the oval guideline and 2 press [Shutter] to register the face.

If the subjects face is not aligned with the oval guideline, the white frame will not appear. You can take photos of a subjects face directly from the front, to the left side, to the right side, from above, or from below. Take photos of one person at a time when registering faces.

The camera may recognize and register faces incorrectly depending on lighting conditions, remarkable changes in the subject's pose or face, and whether or not the subject is wearing glasses. The camera can automatically register up to 14 faces. If the camera recognizes a new face when there are 14 registered faces, it will replace the face in the lowest priority with the new one. The camera can detect up to 10 faces in one scene.

Shooting options 56

Using face detection

Select 3 when the face list appears. Your favorite faces are indicated with a on the face list.

You can register up to 6 favorite faces. The ash option will be set to Off. If you register the same face twice, you can delete one of the faces in the face list.

Viewing your favorite faces

In Shooting mode, select f > . (In some modes, select f .)

Select to change the ranking of your favorite faces.

See page 69 for more information about the face list.

Shooting options 57

Adjusting the exposure manually (EV)

Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo.

Darker (-) Neutral (0) Brighter (+)

In Shooting mode, select 1 f .

Select a value to adjust the exposure.2 +: brighter, -: darker

-2 -1 0 +2+1

EV

pdvD

Adjusting brightness and color Learn how to adjust the brightness and color for better image quality.

Select 3 . The adjusted exposure value will appear as shown below.

Once you adjust the exposure, the setting will remain the same. You may need to change the exposure value later to avoid overexposure or underexposure. If you cannot decide on an appropriate exposure, select AEB (Auto Exposure Bracket). The camera takes photos with different exposures: normal, underexposed, and overexposed. (p. 62)

Shooting options 58

Adjusting brightness and color

Option Description

Off: ACB is off.

On: ACB is on.

The ACB feature is always on in the a mode. This feature is not available when Continuous, Motion Capture, or AEB is in use.

Compensating for backlighting (ACB) When the light source is behind your subject or there is high contrast between your subject and the background, your subject is likely to appear dark in the photo. In this case, set the Auto Contrast Balance (ACB) option.

Without ACB With ACB

In Shooting mode, select 1 f > .

Select an option.2

Off

p

Shooting options 59

Adjusting brightness and color

Option Description

Spot: Your camera measures only the light intensity of the very center of the frame. If a subject is not in the center of the scene, your photo may be improperly exposed. Suitable for a subject with backlighting.

Center-weighted: Your camera averages the meter reading of the entire frame with emphasis placed on the center. Suitable for photos with subjects in the center of the frame.

Changing the metering option The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select.

In Shooting mode, select 1 f > . (In the v and D modes, select f .)

Select an option.2

Multi

Option Description

Multi: Your camera divides the scene into several areas, and then measures the light intensity of each area. Suitable for general photos.

pdvD

Shooting options 60

Adjusting brightness and color

Auto WB

Option Description

Auto WB: Use automatic settings depending on the lighting conditions.

Daylight: Select when taking outdoor photos on a sunny day.

Cloudy: Select when taking outdoor photos on a cloudy day or in shadows.

Fluorescent_H: Select when shooting under a daylight uorescent or three-way uorescent light.

Fluorescent_L: Select when shooting under white uorescent light.

Tungsten: Select when taking indoor photos under incandescent bulbs or halogen lamps.

Custom Set: Use your pre-dened settings. (p. 61)

Selecting a light source (White balance)

The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select an appropriate lighting condition to calibrate the white balance, such as Auto WB, Daylight, Cloudy, or Tungsten.

Auto WB Daylight

Cloudy Tungsten

In Shooting mode, select 1 f .

Select an option.2

pdvD

Shooting options 61

Adjusting brightness and color

Dening your own white balance You can customize the white balance by taking photos of a white surface, such as a piece of paper. This will help you to match the colors in your photo with the actual scene according to your lighting condition.

In Shooting mode, select 1 f .

Aim the lens at a piece of white paper.2

Press [3 Shutter].

Shooting options 62

Using burst modes It can be difcult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. In these cases, select one of the burst modes.

ps

Option Description

Motion Capture: While you are pressing [Shutter], the camera takes VGA photos (6 photos per second; maximum of 30 photos).

AEB: Take 3 photos with different exposures: normal, underexposed, and overexposed. Use a tripod to prevent blurry photos.

The options may differ depending on the shooting mode.

You can use the ash, timer, and ACB only when you select Single. When you select Motion Capture, the resolution will be set to VGA and the ISO speed will be set to Auto. Depending on the selected face detection option, some burst options are not available.

In Shooting mode, select 1 f > (once or twice) .

Select an option.2

Single

Option Description

Single: Take a single photo.

Continuous: While you are pressing [Shutter], the camera takes photos continuously. The maximum number of photos depends on the capacity of your memory card.

Shooting options 63

Improving your photos Learn how to improve your photos by applying photo styles, colors, or smart lter effects, or make some adjustments.

Dening your own RGB tone

In Shooting mode, select 1 f > (once or twice) .

Select a color (R: Red, G: Green, B: Blue).2 Adjust the amount of the selected color.3

Custom RGB

Select 4 .

Applying photo styles Apply different styles to your photos, such as Soft, Vivid, or Forest.

Soft Vivid Forest

In Shooting mode, select 1 f > (once or twice) .

Select an option.2 Select to dene your own RGB tone.

Normal

When you select Sketch, the photo will be automatically resized to or smaller. If you use this function, you cannot set the smart lter and image adjustment options.

apdv

Shooting options 64

Improving your photos

In Shooting mode, select 1 f > (once or twice) .

Select an effect. 2 Option Description

Normal: No effect

Miniature: Make a photo of a life-size location or object look like a photo of a miniature scale model. Blurring parts of the photo makes the scene seem much smaller than it actually is.

Vignetting: Apply the retro-looking colors, high contrast, and strong vignette effect of lomo cameras.

Fish-eye 1: Distort close objects to imitate the visual effect of a sheye lens.

Fish-eye 2: Blacken the edges of the frame and distort objects to imitate the visual effect of a sheye lens.

If you select Miniature when recording a video, the miniature recording time is displayed with the icon and is shorter than the real recording time. If you select Miniature when recording a video, the sound will not be recorded. When you apply a smart lter effect while recording a video, the video will be automatically resized to or smaller. If you use this function, you cannot set the photo style and image adjustment options.

Applying smart lter effects Apply various lter effects to your photos to create unique images.

Miniature Vignetting

Fish-eye 1 Fish-eye 2

apdv

Shooting options 65

Improving your photos

Contrast option Description

- Decrease the color and brightness.

+ Increase the color and brightness.

Saturation option Description

- Decrease the saturation.

+ Increase the saturation.

Select 0 if you do not want to apply any effects (suitable for printing). If you use this function, you cannot set the smart lter effects.

Adjusting your photos Adjust the sharpness, saturation, and contrast of your photos.

In Shooting mode, select 1 f > (twice) .

Select an adjustment option.2 : Sharpness : Contrast : Saturation

Select a value to adjust the selected item.3

-2 -1 +2+10

Sharpness

Sharpness option Description

- Soften the edges on your photos (suitable for editing the photos on your computer).

+ Sharpen the edges to improve the clarity of your photos. This may also increase the noise on your photos.

p

Playing back 67 Starting Playback mode 67 Viewing photos 73 Playing a video 75 Playing a voice memo 76

Editing a photo 78 Rotating a photo 78 Resizing photos 78 Applying photo styles 79 Applying smart lter effects 80 Applying a special effect 81 Correcting exposure problems 81 Editing photos of portraits 82 Creating a print order (DPOF) 82

Viewing les on a TV or HDTV 84

Transferring les to your computer (for Windows) 86 Transferring les using Intelli-studio 87 Transferring les by connecting the camera as a removable disk 89 Disconnecting the camera (for Windows XP) 90

Transferring les to your computer (for Mac) 91

Printing photos with a photo printer (PictBridge) 92

Playback/Editing Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to connect your camera to your photo printer, TV, or HDTV.

Playback/Editing 67

Playing back Learn actions to play back photos, videos, or voice memos, and managing les.

Viewing les using motion recognition You can view les by tilting the camera.

Motion recognition may not work well if you hold the camera parallel to the ground. When you rotate the camera 90o or 180o while viewing a photo, the camera will automatically change the orientation of the displayed photo according to the camera direction. To deactivate this function, select M . Gesture View

Off in Playback mode.

Starting Playback mode View photos or play videos and voice memos stored in your camera.

Press [1 Playback]. The most recent le you have taken or recorded will be displayed. If the camera is off, it will turn on.

Draw a horizontal bar left or right to scroll through les.2 Select < to view the previous le. Hold to view les quickly. Select > to view the next le. Hold to view les quickly.

If you want to view les stored in the internal memory, remove your memory card. The camera will not properly play back les that are too large or those taken with cameras from other manufacturers.

Playback/Editing 68

Playing back

Start a slide show (p. 74)

Motion recognition may not work well if you hold the camera parallel to the ground, as shown below.

Selecting a menu using motion recognition Your camera features a built-in motion sensor that allows you to quickly select a menu by tilting the camera.

In Playback mode, tilt the camera while touching and holding .

Set the current photo as your favorite photo* ( will appear on the top of the le.)

Lock or unlock the current le ( will appear on the top of the le.)

* You cannot set les as favorites for:

videos or voice memos - photos with errors or locked photos - photos taken with cameras from other manufacturers - photos taken using the motion capture option set - photos that are too large for the available memory -

Playback/Editing 69

Playing back

Icon Description

Select a menu using motion recognition (p. 68)

N Use network menus and the Bluetooth feature (p. 94)

M Playback and settings menus

Playback time of videos or voice memos

Play videos or voice memos (Video p. 75/Voice memo p. 76)

Ranking your favorite faces You can change the ranking of your favorite faces or delete them. This feature is available only when you use a memory card.

In Playback mode, select 1 .

1/2

1

2

3

4

5

6

Face List

Select to cancel your favorite faces. Select to view your favorite faces or view all faces.

Display in Playback mode

Information

Icon Description

Photo includes a voice memo

v Video le

Print order has been set (DPOF)

Protected le

Photo includes a registered face; Available only when you use a memory card

Favorite le

Folder name File name

Open the face list (p. 69); Available only when you use a memory card

Delete les (p. 72)

Play a slide show (p. 74)

Edit photos (p. 78)

Select a display type (p. 26)

Playback/Editing 70

Playing back

Option Description

Type View les by the le type.

Date View les by the date they were saved.

Color View les by the dominant color of the image.

Week View les by the weekday they were saved.

Favorite View your favorite les.

Face View les by recognized faces and favorite faces. (Up to 20 people)

It may take some time for the camera to open Smart Album or to change the category and reorganize les.

Select a date, le type, weekday, color, or face.2 You can also touch and hold < or > to scroll through dates, le types, weekdays, colors, or faces.

Select 3 < or > to scroll through les.

Select 4 to return to the normal view.

Once you select a category and a menu that displays thumbnails (such as deleting multiple les or protecting selected les), the camera will display all les sorted by category or only those that match the category option.

Select 2 a face.

1

2

3

4

Edit Ranking

Select 3 , or . to change the ranking of the face and select .

Viewing les by category in Smart Album View and manage les by categories, such as date, le type, or week.

In Playback mode, select 1 a category. You can also access Smart Album by rotating [Zoom] left.

29 61 7 20

Type

Date

Color

Week

Favorite

Face

Playback/Editing 71

Playing back

Protecting les Protect your les from accidental deletion.

To select and protect les,

In Playback mode, select 1 M.

Select 2 Protect Select.

Select les you want to protect.3 Select to select all les. Select to cancel your selection.

Select 4 .

Viewing les as thumbnails Scan thumbnails of les.

In Playback mode, rotate [Zoom] left to display 9 or 16 thumbnails (rotate [Zoom] right to return to the previous mode).

29 61 7 20

To Do this

Scroll through les Select < or >.

View a le Select a thumbnail.

Delete les Select . (p. 72)

Select a category Select .

Playback/Editing 72

Playing back

To delete all les,

In Playback mode, select 1 M.

Select 2 Delete All Yes.

Alternate way to delete a le

While viewing a le in Playback mode, draw an X on the screen.

To protect all les,

In Playback mode, select 1 M.

Select 2 Protect All Lock.

Deleting les Delete single les or all les at once. You cannot delete protected les.

To delete a single le,

In Playback mode, select a le 1 .

Select 2 Yes to delete the le.

To delete multiple les,

In Playback mode, select 1 Multiple Delete.

Select les you want to delete. 2 Select to select all les on the current screen. Select to cancel your selection.

Select 3 Yes.

Playback/Editing 73

Playing back

Copying les to the memory card You can copy les from the internal memory to a memory card.

In Playback mode, select 1 M.

Select 2 . Copy to Card.

Select 3 Yes to copy les.

Viewing photos View a photo by changing the orientation by gesture or zooming in on part of a photo or view photos as a slide show.

Rotating a photo by gesture While viewing a single le, drag your nger as shown below to rotate the photo 90.

Using the recycle bin If you activate the recycle bin, les you delete will be sent to the recycle bin instead of being deleted permanently. This applies to single les or selected les onlyif you choose to delete all les, those les will not be sent to the recycle bin.

To activate the recycle bin,

In Playback mode, select 1 M.

Select 2 Recycle Bin On.

To restore les from the recycle bin,

In Playback mode, select 1 M.

Select 2 Recycle Bin Retrieve.

This function does not work for videos or voice memos. It may take longer to delete les when using the recycle bin function. If you format the internal memory, all les in the recycle folder will be deleted. The recycle bin will hold up to 10 MB of les. Once you exceed the 10 MB limit, the camera asks you whether to empty the recycle bin. Select Yes to empty the recycle bin or No to delete only the current le.

Playback/Editing 74

Playing back

Starting a slide show You can apply effects and audio to your slide show. This function does not work for videos or voice memos.

In Playback mode, select 1 .

Set a slide show effect.2

Option Description

Images: Select photos (up to 2.000) for your slide show.

Play Mode: Select whether or not to loop the slide show.

Interval: Set the interval between photos. This will be available when is selected in the Effect menu. When used with an effect option other than , the interval will be set to 1 sec.

Enlarging a photo

In Playback mode, rotate [Zoom] right to enlarge a photo (rotate [Zoom] left to reduce a photo).

The enlarged area and zoom ratio are indicated on the top of the screen. The maximum zoom ratio may vary depending on the resolution. Select arrows to move the enlarged area.

Icon Description

Delete the le.

Crop the enlarged photo (it will be saved as a new le).

Go back to the original view.

Playback/Editing 75

Playing back

Playing a video You can play a video, capture an image from a video, or crop a video.

In Playback mode, select a video 1 .

Use the following icons to control playback.2

Icon Description

Scan backward.

/ Pause or resume playback.

Stop playback.

Scan forward.

Adjust volume or mute sound.

Option Description

Music: Select background audio.

Effect: Select a transition effect. Select for no effects.

Select 3 to start the slide show. Touch on the screen (except for option icons) to pause the slide show. Select to adjust the volume of background audio or to mute the sound. Select to switch to Playback mode.

Playback/Editing 76

Playing back

Playing a voice memo

Playing a voice memo

In Playback mode, select a voice memo 1 .

Use the following icons to control playback.2

Icon Description

Scan backward.

/ Pause or resume playback.

Stop playback.

Scan forward.

Adjust volume or mute sound.

Trimming a video during playback

Select 1 at the point where you want the new video to begin and select .

Select 2 to resume playback.

Select 3 at the point where you want the new video to end and select .

Select 4 Yes.

The original video should be at least 10 seconds long. The edited video will be saved as a new le.

Capturing an image during playback

Select 1 at the point where you want to save a still image.

Select 2 .

Select 3 Yes.

A captured image will have the same le size as the original video le and will be saved as a new le.

Playback/Editing 77

Playing back

Playing a voice memo added to a photo

In Playback mode, select a photo that includes a voice 1 memo .

Use the following icons to control playback.2

Icon Description

/ Pause or resume playback.

Stop playback.

Adjust volume or mute sound.

Adding a voice memo to a photo

In Playback mode, select a photo 1 M.

Select 2 Voice Memo On.

Press [3 Shutter] to record a short voice memo (10 seconds maximum).

Press [Shutter] to stop recording a voice memo.

Playback/Editing 78

Editing a photo Perform photo editing tasks, such as rotating, resizing, eliminating red-eyes, and adjusting brightness, contrast, or saturation.

Edited photos will be saved as new les. When you edit photos that are or larger, they will be automatically resized to a lower resolution (except when rotating or resizing photos).

Resizing photos

In Playback mode, select a photo 1 .

Select 2 an option. Select to save the photo as a start image. (p. 113)

1920 X 1080

Select 3 .

Available options differ depending on the size of the selected photo.

Rotating a photo

In Playback mode, select a photo 1 .

Select 2 an option.

Left 90

Select 3 .

Playback/Editing 79

Editing a photo

Dening your own RGB tone

In Playback mode, select a photo 1 .

Select a color (R: Red, G: Green, B: Blue).2 Adjust the amount of the color.3

Custom RGB

Select 4 .

Applying photo styles Apply a different color tone to the photo, such as Soft, Vivid, or Forest.

Soft Vivid Forest

In Playback mode, select a photo 1 .

Select 2 an option. Select to dene your own RGB tone.

Soft

Select 3 .

Playback/Editing 80

Editing a photo

Applying smart lter effects Apply various lter effects to your photos to create unique images.

Miniature Vignetting

Fish-eye 1 Fish-eye 2

In Playback mode, select a photo 1 .

Select 2 an effect.

Miniature

Select 3 .

Playback/Editing 81

Editing a photo

Correcting exposure problems Adjust ACB (Auto Contrast Balance), brightness, contrast, or saturation.

Adjusting brightness/contrast/saturation

In Playback mode, select a photo 1 .

Select 2 an adjustment option. : Brightness : Contrast : Saturation

Select a value to adjust the selected item. 3 (-: less or +: more)

Select 4 .

Adjusting ACB (Auto Contrast Balance)

In Playback mode, select a photo 1 .

Select 2 .

Select 3 .

Applying a special effect Apply special effects to the photo, such as color lters or noise effects.

In Playback mode, select a photo 1 .

Select 2 an option.

Elegant

Option Description

Color Filter: Change background colors to black and white to make the main subject stand out.

Elegant: Apply effects to the photo to make it brighter and softer.

Add Noise: Add noise to the photo to give it an aged look.

Select 3 .

Playback/Editing 82

Editing a photo

Creating a print order (DPOF) Select photos to be printed and set options, such as number of copies or paper size.

The memory card can be taken to a print shop that supports DPOF (Digital Print Order Format) or you can print photos directly through a DPOF-compatible printer at home. Wide photos may print with the left and right edges cut off, so be aware of the dimensions of your photos. You cannot set the DPOF for the photos stored in the internal memory.

In Playback mode, select 1 M.

Select 2 . DPOF Select. To print all les, select All and skip to step 5.

Select photos to print.3 Select to select all les. Select to cancel your selection.

Select 4 .

Editing photos of portraits You can improve your photos by hiding facial imperfections and removing red-eye.

Hiding facial imperfections

In Playback mode, select a photo 1 .

Select 2 .

Select a level.3 As the number increases, more imperfections are hidden.

Select 4 .

Removing red-eye

In Playback mode, select a photo 1 .

Select 2 .

Select 3 .

Playback/Editing 83

Editing a photo

Set DPOF options.5

Option Description

Select whether to print the photos as thumbnails. (Select to print photos as thumbnails.)

Specify the size of the print.

Select 6 , or . to set the number of copies.

Select 7 .

If you specify the print size, you can print photos only with DPOF 1.1-compatible printers.

Playback/Editing 84

Viewing les on a TV or HDTV Play back photos or videos by connecting your camera to a TV using the A/V cable.

View photos or play videos using the touch screen on 8 your camera.

The touch screen will function as the controller for the TV screen. Locate the option you want on the TV screen and touch where the option is located on the camera screen. When a pointer appears on the option on the TV screen, select on the camera screen.

On some TVs, digital noise may occur or part of an image may not appear. Images may not appear centered on the TV screen depending on your TV settings. You can capture photos or videos while the camera is connected to a TV.

In Shooting or Playback mode, select 1 M .

Select2 . (twice) Video Out.

Select a video signal output according to your country or 3 region. (p. 115)

Turn off your camera and TV.4 Connect your camera to your TV using the A/V cable.5

Video Audio

Turn on your TV and select the video output mode using 6 the TV remote control.

Turn on your camera and press [7 Playback].

Playback/Editing 85

Viewing files on a TV or HDTV

Turn on your camera.6 The HDTV will be powered on automatically and the camera screen will be displayed.

View files using a remote control of your camera or 7 HDTV.

If your HDTV supports the Anynet+(CEC) profile, turn the Anynet+ on in the settings menu (p. 115) to control all connected Samsung A/V devices with the TV remote control.

Viewing files on an HDTV You can view high-quality and uncompressed photos or videos on an HDTV using the optional HDMI cable. HDMI (High Definition Multimedia Interface) is supported by most HDTVs.

In Shooting or Playback mode, select 1 M .

Select 2 . (twice) HDMI Size.

Select an HDMI resolution.3 Turn off your camera and HDTV.4 Connect your camera to your HDTV using an optional 5 HDMI cable.

Playback/Editing 86

Transferring les to your computer (for Windows) Transfer les to your computer using the built-in Intelli-studio program. You can also edit les or upload les to your favorite websites.

Intelli-studio may not perform correctly on some computers, even when the computer meets the requirements. If your computer does not meet the requirements, videos may not play correctly or it may take longer to edit videos. Install DirectX 9.0c or above before you use the program. You must use Windows XP/Vista/7 or Mac OS 10.4 or later to connect the camera as a removable disk.

Using a self-assembled PC or a PC and OS that are not supported may void your warranty.

Requirements for Intelli-studio

Item Requirements

CPU Intel Pentium 4, 3.2 GHz or higher/ AMD AthlonTM FX 2.6 GHz or higher

RAM Minimum 512 MB RAM (1 GB and above recommended)

OS Windows XP SP2/Vista/7

Hard disk capacity

250 MB or more (1 GB or more recommended)

Others

CD-ROM driver nVIDIA Geforce 7600GT or higher/ATI X1600 series or higher 1024 X 768 pixels, 16-bit color display compatible monitor (1280 X 1024 pixels, 32-bit color display recommended) USB port, Microsoft DirectX 9.0c or later

Playback/Editing 87

Transferring les to your computer (for Windows)

Turn on the camera.5 The computer recognizes the camera automatically.

If you set the USB option to Select Mode, select Computer from the pop-up window.

Select a folder on your computer to save new les.6 If your camera has no new les, the pop-up window for saving new les will not appear.

Select 7 Yes. New les will be transferred to the computer.

For Windows Vista, select Run iStudio.exe from the AutoPlay window.

Transferring les using Intelli-studio Intelli-studio will start automatically when you connect the camera to your computer with the USB cable.

The battery will be charged while the camera is connected to a computer with the USB cable.

In Shooting or Playback mode, select 1 M .

Select 2 . (twice) PC Software On.

Turn off the camera.3 Connect the camera to your computer with the USB 4 cable.

You must plug the end of the cable with the indicator light ( ) into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data.

Playback/Editing 88

Transferring les to your computer (for Windows)

Using Intelli-studio Intelli-studio is a built-in program that allows you to play back and edit les. You can also upload les to websites, such as Flickr or YouTube. For details, select Help Help in the program.

If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select Tool Install Intelli-studio on PC. You cannot edit les directly on the camera. Transfer les to a folder on your computer before editing. You cannot copy les in your computer to the camera. Intelli-studio supports the following formats:

Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG) - Photos: JPG, GIF, BMP, PNG, TIFF -

7

8

10

2 1 3 4 5

6

12

13

9

14 15

11

Playback/Editing 89

Transferring les to your computer (for Windows)

Transferring les by connecting the camera as a removable disk You can connect the camera to your computer as a removable disk.

In Shooting or Playback mode, select 1 M .

Select 2 . (twice) PC Software Off.

Connect the camera to your computer with the USB 3 cable.

You must plug the end of the cable with the indicator light ( ) into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data.

Icon Description

1 Open menus

2 Display les in the selected folder

3 Change to the Photo edit mode

4 Change to the Video edit mode

5 Change to the Sharing mode (You can send les by email or upload les to websites, such as Flickr or YouTube.)

6 Enlarge or reduce the thumbnails in the list

7 Select a le type

8 View les of the selected folder on your computer

9 Show or hide les of the connected camera

10 View les of the selected folder on the camera

11 View les as thumbnails, in Smart Album, or on a map

12 Browse folders in the connected device

13 Browse folders in your computer

14 Move to the previous or next folder

15 Print les, view les on a map, store les in My Folder, or register faces

Playback/Editing 90

Transferring les to your computer (for Windows)

Disconnecting the camera (for Windows XP) The way to disconnect the USB cable for Windows Vista/7 is similar.

If the status lamp on your camera is blinking, wait until 1 it stops.

Click 2 on the tool bar at the bottom right of your PC screen.

Click the pop-up message.3 Remove the USB cable.4

The camera may not be removed safely when Intelli-studio is running. End the program before disconnecting the camera.

Turn on the camera.4 The computer recognizes the camera automatically.

If you set the USB option to Select Mode, select Computer from the pop-up window.

On your computer, select 5 My computer Removable Disk DCIM 100PHOTO.

Select the les you want and drag or save them to your 6 computer.

Playback/Editing 91

Transferring les to your computer (for Mac) When you connect the camera to a Macintosh computer, the computer will recognize the device automatically. You can transfer les directly from the camera to the computer without installing any programs.

Mac OS 10.4 or later is supported.

Turn on the camera.2 The computer recognizes the camera automatically and a removable disk icon will be displayed.

If you set the USB option to Select Mode, select Computer from the pop-up window.

Double-click the removable disk icon.3 Transfer photos or videos to the computer.4

Connect your camera to a Macintosh computer with the 1 USB cable.

You must plug the end of the cable with the indicator light ( ) into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data.

Playback/Editing 92

Printing photos with a photo printer (PictBridge) Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.

Select 5 to print. Select to set printing options. See Conguring print settings on page 93.

Select an option.6 Option Description

Current Photo Print the currently selected photo. Skip to step 8.

Selected Photos Print the photos you want.

All Photos Print all photos. Skip to step 8.

In Shooting or Playback mode, select 1 M .

Select 2 . (twice) USB Printer.

With the printer on, connect your camera to the printer 3 with the USB cable.

Turn on your camera.4 The printer recognizes the camera automatically.

Playback/Editing 93

Printing photos with a photo printer (PictBridge)

Option Description

Date: Set to print the date.

File Name: Set to print the name of the le.

Reset: Reset the print options.

Some options are not supported by some printers.

Select 7 < or > to scroll to a photo to print.

Select 8 , or . to set the number of copies and select . If you selected to print the photos you want, repeat steps 7-8 for all photos to print.

Select 9 Yes to conrm. Printing starts. Select Cancel to cancel printing.

Conguring print settings

Option Description

Size: Specify the size of the print.

Layout: Create thumbnail prints.

Type: Select the type of paper.

Quality: Set the printing quality.

Connecting to a WLAN and conguring network settings 95 Connecting to a WLAN automatically 95 Connecting to a WLAN manually 96 Network connection tips 97 Storing your information 98 Storing email addresses 98 Setting the le size to share 99 Conguring the WPS setting 99 Setting a password 99 Changing the password 100 Checking information 100 Entering text 100

Using photo or video sharing websites 101 Accessing a website 101 Uploading photos or videos 102

Sending photos via email 103

Viewing photos or videos on the DLNA devices 104 Viewing photos or videos on a TV screen 104 Viewing photos or videos on another device (renderer) 105

Sending or receiving photos or videos with a camera 107 Sending photos or videos to another camera 107 Receiving photos or videos from another camera 107

Sending photos via Bluetooth 109

Wireless network/Bluetooth Learn to use several functions using wireless local area networks (WLANs) and the Bluetooth feature.

Wireless network/Bluetooth 95

Icon Description

WPS AP

Secured AP

Ad hoc AP

Signal strength

The camera will connect to the WLAN. If the selected AP device supports the WPS prole, select WPS on the next screen and press the WPS button or enter a PIN on the AP device. You can congure the WPS setting to press the WPS button or enter a PIN on the AP device. (p. 99) If the selected AP device requires a password, continue with the next step.

Connecting to a WLAN automatically

In Shooting or Playback mode, select 1 N n.

Select 2 AP Setting. The camera will search for and display available AP devices.

Select an AP device.3 AP Setting

Samsung 1

Samsung 2

Samsung 3

Connecting to a WLAN and conguring network settings Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also congure network settings and learn how to enter text.

This camera uses non-harmonised frequencies and is intended for use in all European countries. The WLAN can be operated indoors in the EU without restriction, but cannot be operated outdoors in France.

Wireless network/Bluetooth 96

Connecting to a WLAN and conguring network settings

Connecting to a WLAN manually

In Shooting or Playback mode, select 1 N n.

Select 2 AP Setting. The camera will search for and display available AP devices.

Select an AP device.3 Select 4 IP Setting Manual.

Select the network proles.5 Option Description

IP Enter the static IP address.

Subnet Mask Enter the subnet mask.

Gateway Enter the gateway.

DNS Server Enter the DNS address.

Enter values and select 6 OK.

When you are nished, select 7 OK. The camera will connect to the WLAN.

Select network proles and options.4 Option Description

Authentication Select a network authentication.

Data Encryption Select an encryption type.

Select the password input eld.5 Enter a password and select 6 OK.

For information about entering text, refer to page 100.

Select 7 OK. The camera will connect to the WLAN. On the top line of the screen, you can check the network signal status.

Icon Description

Signal is found.

No signal is found.

Wireless network/Bluetooth 97

Connecting to a WLAN and conguring network settings

When connecting to the network, you will be charged according to your contract with your network service provider. You can use only free WLANs with your camera. If you use free WLANs that require the user agreement and additional information when you connect to a web browser, some features may be limited when connecting to websites or sending email. Frequency ranges allow you to connect to the network will differ depending on the country. The WLAN feature of your camera must comply with radio transmission laws, so use of this feature may be restricted in some countries. We recommend that you use the WLAN feature in the country where you purchased the camera. For network proles and a password, contact your network administrator or network service provider. Methods of conguring the network proles may differ depending on the network environment. Do not access a network that you are not allowed to use. Use a fully charged battery while connecting to the network. When connecting to the network using Auto IP, make an autoip.txt le and copy it to the inserted memory card.

Network connection tips Some AP devices will not allow your camera to connect to the network. If you are far from the AP device, it may take long to connect to the network. If there is any electronic equipment nearby that uses the same radio frequency (RF) signals, the camera may not connect to the AP device. If the AP device has a non-English name, it may not appear in the search list or the name may appear jumbled or incomplete. For network proles and a password, contact your network administrator or network service provider. If the network requires any authentication from the service provider, you may not connect to it. Contact your network service provider. The number of characters and numbers allowed for the encryption key differs depending on the encryption type. A WLAN connection may not be possible depending on your surroundings. When searching for networks, you may be able to nd a printer that supports the network. However, you cannot use the printer to connect to a network. The camera cannot connect to the network if it is connected to a TV with the A/V cable. Also, when the camera is connected to the network, you cannot view les on a TV screen even when connected with the A/V cable.

Wireless network/Bluetooth 98

Connecting to a WLAN and conguring network settings

Storing email addresses Store up to 10 email addresses in your camera. You can use them when you send your photos via email.

In Shooting or Playback mode, select 1 N n.

Select 2 Email Address.

Email Address Book

Samsung

Select to display the recent recipient email addresses. Select to edit the email address. Select to delete the email address.

Select 3 .

Enter a name and email address.4 When you are nished, select 5 OK.

Storing your information Store your name and email address to send emails or to nd out your camera on another device.

In Shooting or Playback mode, select 1 N n.

Select 2 User Setting.

Select the name input eld and enter your name.3 For information about entering text, refer to page 100.

When you are nished, select 4 OK.

Select the email input le and enter your email address.5 When you are nished, select 6 OK.

Select 7 OK to save your information.

Wireless network/Bluetooth 99

Connecting to a WLAN and conguring network settings

Setting a password Restrict sending emails and conguring network settings by setting a password.

In Shooting or Playback mode, select 1 N n.

Select 2 . Setting Password On Conrm.

Enter a password (4 digits).3 Enter the password (4 digits) again.4

To reset a password, select Reset from the password input window. If you reset the password, your stored email addresses, recently sent email addresses, and all personal information will be deleted to protect user information.

Setting the le size to share Set the le size you will share with other DLNA-authorised devices. You can select either the original size or .

In Shooting or Playback mode, select 1 N n.

Select 2 DLNA -Image Size.

Select a size.3

Conguring the WPS setting Congure this setting to press a WPS button or enter a PIN when connecting to a WLAN with an AP device that supports the WPS prole.

In Shooting or Playback mode, select 1 N n.

Select 2 . WPS Type.

Select 3 PBC to press the WPS button or PIN to enter a PIN.

Wireless network/Bluetooth 100

Connecting to a WLAN and conguring network settings

Entering text To enter text when storing your information or email addresses, select the appropriate letters, symbols, and numbers.

User Setting: Name

Icon Description

Move the cursor.

Enter capital letters or small letters, and change symbols.

Enter letters.

Enter a space.

Delete the last letter.

Enter numbers and symbols.

Store the displayed text.

You can enter text only in English, regardless of the display language.

Changing the password Change the password if necessary.

In Shooting or Playback mode, select 1 N n.

Select 2 . Change Password.

Enter the current password (4 digits).3 Enter a new password (4 digits).4 Enter the new password (4 digits) again.5

Checking information Check the Mac address and serial number of your camera to register it with the Samsung website.

In Shooting or Playback mode, select 1 N n.

Select 2 . Device Information.

Wireless network/Bluetooth 101

Using photo or video sharing websites Upload your photos or videos to le sharing websites (available websites will be displayed on your camera).

Icons on a website

Icon Description

Previous page

Next page

Stop

Refresh

Home

Close

Accessing a website

In Shooting or Playback mode, select 1 N . The camera automatically connects to the WLAN via the last connected AP device. If the camera has not connected to the WLAN, it automatically searches for available AP devices. (p. 95)

Select a website.2 Enter your login ID and password, and select 3 Login.

Create your login ID and password on a PC in advance.

Wireless network/Bluetooth 102

Using photo or video sharing websites

The maximum photo resolution you can upload is , and the longest video you can upload is 30 seconds at 320 X 240 resolution or the video recorded using For Sharing.

If the selected photo resolution is higher than , it will be automatically resized to a lower resolution. When the total size of all photos selected is smaller than 10 MB, you can upload them to a website (up to 20 photos). Methods of uploading photos or videos may differ depending on the selected website. If you cannot access a website because of rewall or user authentication settings, contact your network administrator or network service provider. When you are not able to upload photos or videos due to server errors, select . Titles for photos or videos you are uploading could be the date they are captured. The speed of your internet connection may affect how quickly photos upload or web pages open.

Uploading photos or videos

Select 1 .

Select 2 < or > to scroll through les.

Drag photos or videos to the selection area or select 3 photos or videos, and select OK.

Date

Select Date to categorise the les. (p. 70)

Enter a title and select an album, and then select 4 .

Wireless network/Bluetooth 103

Sending photos via email

Select 3 OK.

Select4 Text Input and enter your email text.

Select photos, or drag photos to the selection area and 5 select OK.

The photos will be sent to the selected email addresses. The Transfer completed. message will still appear, even when photos cannot be sent or be sent as spam due to an error with the recipient's email account.

When the total size of all photos selected is smaller than 10 MB, you can send them via email (up to 20 photos). You can enter up to 10 recipients for each email. You may not be able to send an email due network connection or email account settings. The maximum photo resolution you can send is and if the selected photo resolution is higher than , it will be automatically resized to a lower resolution. If you cannot send an email because of rewall or user authentication settings, contact your network administrator or network service provider. When there are no photos in the camera memory, you cannot use this feature.

In Shooting or Playback mode, select 1 N . The camera automatically connects to the WLAN via the last connected AP device. If the camera has not connected to the WLAN, it automatically searches for available AP devices. (p. 95)

Enter email addresses for the sender and receiver.2 Sender/ Receiver

Samsung

Samsung 1

Select to enter or modify the email address of the sender. Select to retrieve the stored email addresses. Select to enter an email address manually.

Wireless network/Bluetooth 104

Viewing photos or videos on the DLNA devices The Digital Living Network Alliance (DLNA) is an international technology standard for sharing media les between networked devices in your home. With this technology, you can view your photos or videos on a widescreen TV or another device. You cannot send or receive voice memos.

On the TV, search for the camera and browse the shared 4 photos or videos.

Your cameras name is what you entered in the user setting. (p. 98) For information about searching for the camera and browsing the photos or videos on the TV, refer to the TV user manual. Videos may not play smoothly depending on type of TV or network condition. If this happens, re-record the video in 640X480 or 320X240 quality and play it again. If videos do not play smoothly on your TV over the wireless connection, connect the camera to the TV with an HDMI or AV cable.

AP

Viewing photos or videos on a TV screen View your photos or videos on a TV that supports the DLNA- authorized Digital Media Player (DMP).

In Shooting or Playback mode, select 1 N . The camera automatically connects to the WLAN via the last connected AP device. If the camera has not connected to the WLAN, it automatically searches for the available AP devices. (p. 95)

Select 2 Selected Files. To share all les, select All Files and skip to step 4.

Select photos or videos to share.3 You can share up to 1000 photos or videos.

Wireless network/Bluetooth 105

Viewing photos or videos on the DLNA devices

Viewing photos or videos on another device (renderer)

In Shooting or Playback mode, select 1 N . The camera automatically connects to the WLAN via the last connected AP device. If the camera has not connected to the WLAN, it automatically searches for the available AP devices. (p. 95) If the camera has connected to the WLAN, it automatically searches for and displays the available DLNA-enabled devices. However, searching for the devices may take some time.

Select a device (renderer) that will play the photos or 2 videos.

Drag a photo or video to the selection area or select a 3 photo or video.

The photos or videos will appear on the devices screen. To view other photos or videos, drag a photo or video to the selection area one by one on your camera.

On a TV screen, you can view only photos or videos captured with your camera. The distance between the camera and TV may be affected by the AP device. If the camera is connected to 2 TVs, playback may be slowed. The photos will be shared according to the size you set. (p. 99) The videos will be shared in their original sizes. You can use this feature only with a DLNA-authorised Digital Media Players (DMPs). Shared photos or videos will not be stored on the TV, but they can be stored according to the TV specications. Transferring photos or videos to the TV may take some time depending on the network connection and the le size.

If you power off the camera abnormally while viewing photos or videos on a TV (ex. removing battery), the TV considers the camera to still be connected. The order of photos or videos on the camera and TV could be different. According to the number of photos or videos you want to share, it may take some time to load your photos or videos and complete the initial set-up process. While viewing photos or videos on the TV, continuously using the TV remote or performing additional operations on the TV may prevent this feature from working properly. If you reorder or sort les on the camera while viewing them on a TV, you must repeat the initial set-up process to update the list of les on the TV. When there are no photos or videos in the camera memory, you cannot use this feature.

Wireless network/Bluetooth 106

Viewing photos or videos on the DLNA devices

When searching for DLNA-authorised devices on the network, the camera may not nd all devices on the network. If you power off the device abnormally while viewing photos or videos on a device, the camera considers the device to still be connected. The photos will be shared according to the size you set. (p. 99) The videos will be shared in their original sizes. You can use this feature only with a DLNA-authorised renderer. The shared photos or videos will not be stored on the device, but they can be stored according to the device specications. Transferring photos or videos to the device may take some time depending on the network connection and the le size. You can transfer les one by one. When there are no photos or videos in the camera memory, you cannot use this feature. On other devices (renderer), you can view only photos or videos captured with your camera. When you search for other devices, searching for devices may take some time depending on the network connection. In this case, try again.

Wireless network/Bluetooth 107

Sending or receiving photos or videos with a camera Learn to send or receive photos or videos to or from camera of the same model. You cannot send or receive voice memos.

Receiving photos or videos from another camera

In Shooting or Playback mode, select 1 N .

Select 2 Receive. On the sending camera, select Send and after some time, select Receive.

Select the name of the sending camera.3 Enter the sending cameras password and select 4 OK.

The password will appear on the screen of the sending camera. When the sending camera transmits photos or videos, they will appear on the receiving camera.

Sending photos or videos to another camera

In Shooting or Playback mode, select 1 N .

Select 2 Send. The camera generates a password and displays it on the screen while waiting for a connection with the receiving camera.

On the receiving camera, select the name of the sending 3 camera.

The sending cameras name is what you entered in the user setting. (p. 98)

Enter the password (4 digits) on the receiving camera.4 The selection area automatically appears on the sending camera.

Drag photos or videos to the selection area or select 5 them.

The photos or videos will be sent to the receiving camera.

Wireless network/Bluetooth 108

Sending or receiving photos or videos with a camera

This feature uses an ad hoc wireless network. You cannot send and receive les at the same time. Once you have received les, end the connection with the camera and then reconnect to the camera to send photos or videos. The distance between two cameras may be affected by the efciency of the ad hoc wireless network. If a camera turns off abnormally while sending or receiving photos or videos, the other camera considers the camera to still be connected. Cameras will be disconnected after some time. It may take some time to send or receive photos or videos depending on the le size and the ad hoc network connection. You can transfer les one by one. If you fail to receive or send a photo or videos, it will not be saved on the receiving camera. When there are no photos in the camera memory, you cannot use this feature. You can send and receive photos or videos taken with your camera or other camera only. If you select the original size in the DLNA-image size setting, you can send or receive the photos without transformation. However, if you select and the selected photo resolution is higher than , it will be automatically resized to a lower resolution. (p. 99) You can send or receive videos smaller than 35 MB only.

Wireless network/Bluetooth 109

Sending photos via Bluetooth Bluetooth is a wireless protocol for exchanging data over short distances. With Bluetooth, you can send photos to other mobile phones or PDAs. However, you cannot receive photos from other devices and you cannot send videos or voice memos.

Enter a password (4~6 digits) and select 4 OK. If you enter a 6-digit password, you do not need to select OK.

Enter the same password on the device.5 Drag photos to the selection area or select photos.6

Select Images

Date

The photos will be sent to the selected device. The photo size will be changed to 640 X 480 (VGA).

In Shooting or Playback mode, select 1 N . The Bluetooth feature turns on. However, other Bluetooth- enabled devices cannot nd your camera.

To search for and display Bluetooth-enabled devices, 2 select Yes.

If you have searched for the Bluetooth-enabled devices, a list of Bluetooth-enabled devices appears. Select to search again.

Select a Bluetooth-enabled device.3 Bluetooth: Device Search

Samsung 1

Samsung 2

Select . to view other devices. When searching for Bluetooth-enabled devices, you may be able to nd other devices. However, you can send photos only to mobile phones or PDAs.

Wireless network/Bluetooth 110

Sending photos via Bluetooth

After sending is complete, select 7 Yes. The camera and the device are disconnected and the Bluetooth feature turns off.

You can send photos only to Bluetooth-enabled phones or PDAs that support the Object Push Prole (OPP). For details about OPP, visit http://gadgetguide.bluetooth.com. The camera may not search for a specic Bluetooth-enabled device and send a photo to it depending on the device type. If the other device does not have enough memory, the photo may not be transferred. Delete some photos to free up some memory and try sending again. You cannot connect to several Bluetooth-enabled devices at one time. Place the camera and the Bluetooth-enabled device reasonably close to one another. The camera may cause interference with other devices that use or produce radio waves. When there are no photos in the camera memory, you cannot use this feature. Some phones or PDAs may not display photos you sent via Bluetooth.

Settings menu 112 Accessing the settings menu 112 Sound settings 113 Display settings 113 Camera settings 114

Error messages 117

Camera maintenance 118 Cleaning your camera 118 About memory cards 119 About the battery 120

Before contacting a service center 123

Camera specications 126

FCC notice 130

Index 131

Appendixes Refer to settings, error messages, specications, and maintenance tips.

Appendixes 112

Settings menu Learn about various options to congure your camera's settings.

Select an option and save your settings.3

1/2

Volume

Beep Sound

Shutter Sound

Start Sound

AF Sound

Off

Low

Medium

High

Select 4 to return to the previous screen.

Accessing the settings menu

In Shooting or Playback mode, select 1 M.

Select a menu.2

1/2

Volume

Beep Sound

Shutter Sound

Start Sound

AF Sound

: Medium

: On

: 1

: Off

: On

Icon Description

Sound settings: Set various camera sounds and volume. (p. 113)

Display settings: Customize the display settings, such as brightness. (p. 113)

Camera settings: Change the settings for the camera system, such as memory format, default le name, and USB mode. (p. 114)

Appendixes 113

Settings menu

Display settings * Default

Item Description

Function Description

Display a brief description of an option or menu. (Off, On*)

Start Image

Set a start image to display when the camera turns on.

Off*: Display no start image. Logo: Display a default image stored in the internal memory. User Image: Display the image you want. (p. 78)

Only one start image will be saved in the internal memory. If you select a new photo as a start image or reset your camera, the current image will be deleted.

Grid Line Select a type of the grid lines that help you to compose a scene. (2 X 2*, 3 X 3, +, X)

Display Brightness

Adjust the brightness of the screen. (Auto*, Dark, Normal, Bright)

Normal is xed in Playback mode even if Auto is selected.

Sound settings * Default

Item Description

Volume Adjust the volume of any sound. (Off, Low, Medium*, High)

Beep Sound Select a sound to be emitted when touching on the screen or switching modes. (Off, On*)

Shutter Sound Select a sound to be emitted when pressing the shutter button. (Off, 1*, 2, 3)

Start Sound Select a sound to be emitted when turning on your camera. (Off*, 1, 2, 3)

AF Sound Set a sound to be emitted when half-pressing the shutter button. (Off, On*)

Self-Portrait Set to emit a sound when the camera detects your face. (Off, On*)

Appendixes 114

Settings menu

Item Description

Language Select a language for the display text.

Date & Time Set the date and time and select a date format. (Off*, yyyy/mm/dd, mm/dd/yyyy, dd/mm/yyyy)

Time Zone Select a region and set the daylight-saving time (DST).

File No.

Specify how to name les. Reset: Set the le number to start from 0001 when inserting a new memory card, formatting a memory card, or deleting all les. Series*: Set the le number to follow the previous le number when inserting a new memory card, formatting a memory card, or deleting all les.

The default name of the rst folder is 100PHOTO and the default name of the rst le is SAM_0001. The le number increases one by one from SAM_0001 to SAM_9999. The folder number increases one by one from 100PHOTO to 999PHOTO. The maximum number of les that can be stored in one folder is 9999. The camera denes le names according to the Digital rule for Camera File system (DCF) standard. If you change the names of les intentionally, the camera may not play back the les.

Item Description

Quick View Set the duration for reviewing a captured image before returning to Shooting mode. (Off, 0.5 sec*, 1 sec, 3 sec)

Power Save

If you perform no operations for 30 seconds, the camera automatically switches to Power save mode (press any button to deactivate the Power save mode). (Off*, On)

Camera settings * Default

Item Description

Format

Format the internal memory and the memory card (all les-including the protected les-will be deleted). (No, Yes)

If you use a memory card used with cameras from different manufacturers or a memory card reader, or one formatted on a computer, your camera may read the card incorrectly. Format the card before using it.

Reset Reset menus and shooting options (date and time, language, and video output settings will not be reset). (No, Yes)

* Default * Default

Appendixes 115

Settings menu

* Default * Default

Item Description

HDMI Size

Select the resolution of photos when playing back les on an HDTV with the HDMI cable. (NTSC: 1080i*, 720p, 480p/ PAL: 1080i*, 720p, 576p)

If the HDTV does not support the selected resolution, the HDTV automatically selects the next lower resolution. If you select 480p or 576p, the playback menus and Smart Album will not be available when connected to a TV.

Video Out

Set the video signal output according to your region. NTSC*: USA, Canada, Japan, Korea, Taiwan, Mexico PAL (supports only BDGHI): Australia, Austria, Belgium, China, Denmark, England, Finland, Germany, Italy, Kuwait, Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain, Sweden, Switzerland, Thailand

Item Description

Imprint

Set whether to display the date and time on your photos when printing. (Off*, Date, Date & Time)

The date and time will be displayed on the bottom- right corner of the photo in yellow. The date and time may not be printed on some printer models. If you select Text in the s mode, the date and time will not be displayed.

Auto Power Off

Set the camera to automatically turn off when you are not using it. (Off, 1 min, 3 min*, 5 min, 10 min)

Your settings will not change after replacing the battery. The camera will not automatically turn off when:

it is connected to a computer or printer - you are playing a slide show or videos - you are recording a voice memo -

AF Lamp Set an assistant light to help you focus in dark places. (Off, On*)

Anynet+ (HDMI-CEC)

Set to control the camera connected to a Samsung HDTV that supports Anynet+(CEC) with the TV remote control.

Off*: View les without using an HDTV remote control. On: Control the camera with an HDTV remote control.

Appendixes 116

Settings menu

Item Description

USB

Set the function to use via a USB connection with a computer or printer.

Computer*: Connect your camera to a computer for transferring les. Printer: Connect your camera to a printer for printing les. Select Mode: Select a USB mode when you connect your camera to another device.

PC Software Set Intelli-studio to start automatically when you connect your camera to your computer. (Off, On*)

Calibration Calibrate the screen so that your camera will properly recognize the input.

* Default

Appendixes 117

Error messages When the following error messages appear, try these remedies.

Error message Suggested remedies

Low Battery Insert a charged battery or recharge the battery.

Memory Full Delete unnecessary les or insert a new memory card.

No Image File Take photos or insert a memory card that has some photos.

Photo reception failed.

The camera fails to receive a photo from the sending camera. Try sending again.

Transfer failed. The camera fails to send a photo. Try sending again.

Error message Suggested remedies

Card Error

Turn off your camera and then turn it on again. Remove your memory card and insert it again. Format your memory card. (p. 114)

Card not supported.

The inserted memory card is not available with your camera. Insert a microSDTM memory card.

Connection failed.

The camera cannot connect to the network using the selected access point. Select another and try again. The camera fails to connect to another Bluetooth-enabled device or a camera of the same model. Try connecting again.

DCF Full Error File names do not match the DCF standard. Transfer the les on the memory card to your computer and format the card. (p. 114)

Device disconnected.

Connect to a device again.

File Error Delete the damaged le or contact a service center.

Initialization failed. Turn on DLNA-authorised devices on the network.

Invalid password.

The password for transferring les to another Bluetooth-enabled device or a camera of the same model is wrong. Enter the correct password again.

Appendixes 118

Camera maintenance

Camera body Wipe gently with a soft, dry cloth.

Never use benzene, thinners, or alcohol to clean the device. These solutions can damage the camera or cause it to malfunction. Do not press on the lens cover or use a blower brush on the lens cover.

Cleaning your camera

Camera lens and touch screen Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of cleaning paper and wipe gently.

Appendixes 119

Camera maintenance

Memory card capacity The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 1 GB microSDTM card:

Size Super Fine Fine Normal 60 FPS 30 FPS 15 FPS

P h o t o s

122 240 353 - - -

142 278 409 - - -

160 312 454 - - -

206 401 588 - - -

211 409 594 - - -

335 637 908 - - -

510 936 1,314 - - -

762 1,373 1,931 - - -

1,626 2,575 3,090 - - -

* V i d e o s

- - - - Approx. 13' 30"

Approx. 23' 36"

- - - - Approx. 15' 20"

Approx. 32' 33"

- - - - Approx. 37' 50"

Approx. 67' 30"

- - - Approx. 79' 13"

Approx. 138' 19"

Approx. 237' 41"

- - - - Approx. 138 19

-

* The recordable time may vary if you use the zoom. Several videos were recorded in succession to determine the total recording time.

About memory cards

Memory cards you can use You can use microSDTM (Secure Digital) memory cards.

Appendixes 120

Camera maintenance

Battery life

Average time / Number of photos

Test conditions (when the battery is fully charged)

Photos Approx. 120 min/ Approx. 240 photos

This is measured under the following conditions: in the a mode, 14M resolution, Fine quality, OIS on.

1. Set the ash option to Fill in, take a single shot, and zoom in or out.

2. Set the ash option to Off, take a single shot, and zoom in or out.

3. Perform steps 1 and 2 for 30 seconds and repeat for 5 minutes. Then turn off the camera for 1 minute.

4. Repeat steps 1 to 3.

Videos Approx. 80 min Record videos at 1280 X 720 HQ resolution and 30 fps.

The gures above are measured by Samsungs standards and may differ depending on actual usage. Several videos were recorded in succession to determine the total recording time.

About the battery Use only Samsung-approved batteries.

Battery specications

Mode SLB-11A

Type Lithium-ion battery

Cell capacity 1130 mAh

Voltage 3.8 V

Charging time (when the camera is switched off)

Approx. 190 min

Appendixes 121

Camera maintenance

Notes about charging the battery

If the indicator light is off, make sure that the battery is inserted correctly. Turn off your camera when charging. Turn on your camera after charging the battery for more than 10 minutes. Using the ash or recording videos depletes the battery quickly. Charge the battery until the indicator light turns green. If the indicator light blinks in orange or does not illuminate, reconnect the cable, or remove the battery and insert it again. If you charge the battery when the cable is overheated or the temperature is too high, the indicator light may turn orange. Charging will start when the battery cools down.

Notes about charging with a computer connected

Use only the provided USB cable. The battery may not be charged when:

you use a USB hub - other USB devices are connected to your computer - you connect the cable to the port on the front side of your - computer the USB port of your computer does not support the power output - standard (5 V, 500 mA)

Appendixes 122

Camera maintenance

Do not disassemble or puncture the battery with any sharp object. Avoid exposing the battery to high pressure or crushing forces. Avoid exposing the battery to major impacts, such as dropping it from high places. Do not expose the battery to temperatures of 60 C (140 F) or above. Do not allow the battery to come in contact with moisture or liquids. Battery shall not be exposed to excessive heat such as sunshine, re or the like.

Disposal guidelines Dispose of the battery with care. Do not dispose of the battery in a re. Disposal regulations may differ by country or region. Dispose of the battery in accordance with all local and federal regulations.

Guidelines for charging the battery Charge the battery only by the method described in this user manual. The battery can ignite or explode if not charged properly.

Personal injury or death can occur if the battery is handled carelessly or improperly. For your safety, follow these instructions for proper battery handling:

The battery can ignite or explode if not handled properly. If you notice any deformities, cracks, or other abnormalities in the battery, immediately discontinue use of the battery and contact your manufacturer. Use only authentic, manufacturer-recommend battery chargers and adapters and charge the battery only by the method described in this user manual. Do not place the battery near heating devices or expose to excessively warm environments, such as the inside of an enclosed car in the summertime. Do not place the battery in a microwave oven. Avoid storing or using the battery in hot, humid places, such as spas or shower enclosures. Do not rest the device on ammable surfaces, such as bedding, carpets, or electric blankets for a prolonged period. When the device is switched on, do not leave it in any conned space for a prolonged period. Do not allow battery terminals to come in contact with metallic objects, such as necklaces, coins, keys, or watches. Use only authentic, manufacturer-recommended, Lithium- ion replacement batteries.

Appendixes 123

Before contacting a service center If you are having trouble with your camera, try these troubleshooting procedures before contacting a service center. If you have attempted the troubleshooting solution and are still having problems with your device, contact your local dealer or service center.

Situation Suggested remedies

Cannot take photos

There is no space on the memory card. Delete unnecessary les or insert a new card. Format the memory card. (p. 114) The memory card is defective. Get a new memory card. Make sure that the camera is switched on. Charge the battery. Make sure that the battery is inserted correctly.

The camera freezes Remove the battery and insert it again.

The ash does not work

The ash option may be set to Off. (p. 47) You cannot use the ash in the d, v, D, or some s modes.

The ash res unexpectedly

The ash may re due to static electricity. This is not a malfunction of the camera.

The date and time are incorrect

Set the date and time in the display settings menu. (p. 114)

The touch screen or buttons do not work

Remove the battery and insert it again.

Situation Suggested remedies

Cannot turn on the camera

Make sure that the battery is inserted. Make sure that the battery is inserted correctly. Charge the battery.

The power turns off suddenly

Charge the battery. Your camera may be in Power save mode. (p. 114) The camera may turn off to prevent the memory card from being damaged due to an impact. Turn on your camera again.

The camera is losing battery power quickly

The battery may lose power more quickly in low temperatures (below 0 C). Keep the battery warm by putting it into your pocket. Using the ash or recording videos depletes the battery quickly. Recharge if needed. Batteries are consumable parts that must be replaced over time. Get a new battery if the battery life is diminishing quickly.

Appendixes 124

Before contacting a service center

Situation Suggested remedies

The photo is too bright Turn off the ash. (p. 47) Your photo is overexposed. Adjust the exposure value. (p. 57)

The photo is too dark

Your photo is underexposed. Turn on the ash. (p. 47) Adjust the ISO speed. (p. 48) Adjust the exposure value. (p. 57)

The TV does not display your photos

Make sure that the camera is correctly connected to the external monitor with the A/V cable. Make sure that your memory card contains photos.

Your computer does not recognize your camera

Make sure that the USB cable is connected correctly. Make sure that your camera is switched on. Make sure that you are using a supported operating system.

Your computer disconnects the camera while transferring les

The le transmission may be interrupted by static electricity. Disconnect the USB cable and connect it again.

Situation Suggested remedies

The camera screen works poorly

If you use your camera at very low temperatures, it may cause the camera screen to malfunction or discolor. For better performance of your camera screen, use your camera in moderate temperatures.

The memory card has an error

The memory card has not been reset. Format the card. (p. 114)

Cannot play back les

If you change the name of a le, your camera may not play the le (the name of the le should meet the DCF standard). If you encounter this situation, play back les on your computer.

The photo is blurry

Make sure that the focus option you set is suitable for close-up shots. (p. 49) Make sure that the lens is clean. If not, clean the lens. (p. 118) Make sure that the subject is within range of the ash. (p. 126)

The colors in the photo do not match the actual scene

An incorrect white balance can create unrealistic color. Select the proper white balance option to suit the light source. (p. 60)

Appendixes 125

Before contacting a service center

Situation Suggested remedies

Your camera cannot play videos

You can play videos only with the Intelli- studio program. Install the program on your computer. (p. 88) Make sure that the USB cable is connected correctly.

Intelli-studio is not functioning properly

End Intelli-studio and restart the program. You cannot use Intelli-studio on Macintosh computers. Make sure that the PC Software is set to On in the settings menu. (p. 116) Depending on your computer's specication and environments, the program may not launch automatically. In this case, click Start My Computer Intelli-studio iStudio.exe on your computer.

Appendixes 126

Camera specications

Shutter speed

Auto: 1/8 - 1/2,000 sec.

Program: 1 - 1/2,000 sec.

Night: 8 - 1/2,000 sec.

Fireworks: 2 sec.

Exposure

Control Program AE

Metering Multi, Spot, Center-weighted

Compensation 2EV (1/3EV steps)

ISO equivalent Auto, 80, 100, 200, 400, 800, 1600, 3200

Flash

Mode Off, Auto, Red-eye, Fill in, Slow Sync, Red-eye Fix

Range Wide: 0.3 m - 3.2 m (ISO Auto)

Tele: 0.5 m - 1.9 m (ISO Auto)

Recharging time Approx. 4 sec.

Shake reduction

DUAL IS [Optical Image Stabilization (OIS) + Digital Image Stabilization (DIS)]

Image sensor

Type 1/2.3" (Approx. 7.76 mm) CCD

Effective pixels Approx. 14.2 mega-pixels

Total pixels Approx. 14.5 mega-pixels

Lens

Focal length Schneider-KREUZNACH lens f = 5.6 - 39.2 mm (35 mm lm equivalent: 31 - 217 mm)

F-stop range F3.3 (W) - F5.5 (T)

Digital zoom Still image mode: 1.0X - 7.0X

Play mode: 1.0X - 13.5X (depending on image size)

Display

Type WVGA AMOLED

Feature 3.7" (9.4 cm) Wide Full Touch Screen Panel

Focusing

Type TTL auto focus (Multi AF, Center AF, Face Recognition AF, Face Detection AF, Smart Touch AF, One Touch Shooting)

Range

Wide (W) Tele (T)

Normal 80 cm - innity 150 cm - innity

Macro 5 cm - 80 cm 70 cm - 150 cm

Auto Macro 5 cm - innity 70 cm - innity

Appendixes 127

Camera specications

Videos

Modes: Smart Scene Detection (Landscape, Blue Sky, Natural Green, Sunset Sky), Movie

Format: H.264 (Max recording time: 20 min)

Size: 1280 X 720 HQ (30 FPS, 15 FPS), 1280 X 720 (30 FPS, 15 FPS), 640 X 480 (30 FPS, 15 FPS), 320 X 240 (60 FPS, 30 FPS, 15 FPS), 320 X 240 For Sharing (30 FPS)

Frame Rate: 60 FPS, 30 FPS, 15 FPS

Effect: Photo Style Selector, White Balance, Smart Filter

Voice: Off, On, Zoom Mute

Video editing (embedded): Pause during recording, Still image capture, Time trimming

Playback

Type

Single image, Thumbnails, Multi slide show with music and effects, Movie clip, Smart Album* * Smart Album category: Type, Date, Color, Week,

Face, Favorite

Edit Resize, Rotate, Photo Style Selector, Image Adjust, Smart Filter, Special Effect, Face Effect

Effect

Shooting mode

Photo Style Selector: Normal, Soft, Vivid, Forest, Retro, Cool, Calm, Classic, Negative, Sketch, Defog, Custom RGB

Smart Filter: Normal, Miniature, Vignetting, Fish-eye 1, Fish-eye 2

Image Adjust: Sharpness, Contrast, Saturation

White Balance

Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Set

Date Imprinting

Date & Time, Date, Off

Shooting

Photos

Modes: Smart Auto (Portrait, Night Portrait, Backlight Portrait, Backlight, Landscape, White, Motion, Tripod, Night, Macro, Macro Text, Blue Sky, Sunset Sky, Natural Green, Natural Portrait, Macro Color, Fireworks), Auto, Program, DUAL IS, Scene (Night, Portrait, Children, Landscape, Text, Close Up, Sunset, Dawn, Backlight, Fireworks, Beach & Snow, Frame Guide, Beauty Shot)

Drive: Single, Continuous, Motion Capture, AEB

Timer: 10 Sec, 2 Sec, Double, Motion Timer

Appendixes 128

Camera specications

Image size

For 1GB microSDTM

Super Fine Fine Normal

4320 X 3240 122 240 353

4000 X 3000 142 278 409

3984 X 2656 160 312 454

3840 X 2160 206 401 588

3264 X 2448 211 409 594

2560 X 1920 335 637 908

2048 X 1536 510 936 1,314

1920 X 1080 762 1,373 1,931

1024 X 768 1,626 2,575 3,090

These gures are measured under Samsungs standard conditions and may vary depending on shooting conditions and camera settings.

Wireless network

Wi-Fi IEEE 802.11 b/g

DLNA Version: 1.5

Bluetooth Version: 2.0

QD ID: B016336

Effect

Photo Style Selector: Normal, Soft, Vivid, Forest, Retro, Cool, Calm, Classic, Negative, Sketch, Defog, Custom RGB

Image Adjust: ACB, Brightness, Contrast, Saturation

Smart Filter: Normal, Miniature, Vignetting, Fish-eye 1, Fish-eye 2

Special Effect: Color Filter, Elegant, Add Noise

Face Effect: Face Retouch, Red-eye Fix

Voice recording

Voice Recording (Max. 10 hours)

Voice Memo in a photo (Max. 10 sec.)

Storage

Media

Internal memory: Approx. 13 MB

External memory (Optional): microSDTM card (up to 4 GB guaranteed)

Internal memory capacity may not match these specications.

File format

Photo: JPEG (DCF), EXIF 2.21, DPOF 1.1, PictBridge 1.0

Video: H.264 (MPEG-4.AVC)

Audio: WAV

Appendixes 129

Camera specications

Interface

Digital output connector

USB 2.0

Audio output Mono (Internal speaker), Stereo (Microphone)

Video output A/V: NTSC, PAL (selectable)

HDMI 1.4: NTSC, PAL (selectable)

DC power input connector

20 pin, 4.4V

Power source

Rechargeable battery

Lithium-ion battery (SLB-11A, 1130 mAh)

The power source may differ depending on your region.

Dimensions (W x H x D)

103.8 x 58.3 x 19.6 mm

Weight

161.1 g (without battery and memory card)

Operating temperature

0 - 40 C

Operating humidity

5 - 85 %

Software

Intelli-studio

Specications are subject to change without prior notice.

Appendixes 130

Samsung Eco-mark It is Samsungs own symbol mark is used to effectively communicate Samsungs environmental friendly product activities to the consumers. The mark represents Samsungs continuous effort on development of environmental conscious products.

FCC notice

Declaration of Conformity

Trade Name : Samsung Electronics America, Inc.

Model No. : Samsung CL80

Responsible Party : Samsung Electronics America, Inc.

Address : 105 Challenger Road Ridgeeld Park NJ

Telephone No. : 1-800-SAMSUNG (726-7864)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC ID:A3LCL80

Caution: Any changes or modications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorientate, or relocate, the receiving antenna. - Increase the distance between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help.

RF exposure statements: This device is for handheld operation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Appendixes 131

Enlarging 74

Entering text 100

Error messages 117

Exposure 57

F

Face detection Blink detection 54 Face detection 52 Self-portrait 53 Smart face recognition 54 Smile shot 53

Facial brightness 35

Facial imperfections 35

Flash Auto 47 Fill in 48 Off 47 Red-eye 48 Red-eye x 48 Slow sync 48

D

Date and time 114

Deleting les 72

Digital Image Stabilization 37

Digital zoom 28

Disconnecting the device 90

Display brightness 113

Display type 26

DLNA 104

DPOF 82

Dragging 22

DUAL IS mode 37

E

Editing 78

Email Address 98 Sending photo 103

B

Battery Charging 121 Life 120 Specications 120

Beauty Shot mode 35

Blink detection 54

Bluetooth 109

Burst Auto Exposure Bracket (AEB) 62 Continuous 62 Motion capture 62

C

Calibration 20, 116

Camera shake 30

Capturing an image 76

Cleaning Body 118 Display 118 Lens 118

A

ACB in Playback mode 81 in Shooting mode 58

Adjusting Brightness 81 Contrast in Playback mode 81 in Shooting mode 65

Saturation in Playback mode 81 in Shooting mode 65

Sharpness 65

AF Lamp 115

AF Sound 113

Anynet+ 115

Aperture 36

Auto Contrast Balance (ACB) 58

Auto mode 27

Index

Appendixes 132

O

One touch shooting 51

Optical Image Stabilization (OIS) 29

P

Photo quality 44

Photo styles in Playback mode 79 in Shooting mode 63

Playback button 18

Playback mode 67

Printing photos 92

Print order 82

Program mode 38

Protecting les 71

Q

Quick View 114

Memory card Capacity 119 microSD 119

Metering Center 59 Multi 59 Spot 59

Motion recognition in Playback mode 68 in Shooting mode 25

Motion timer 46

Movie mode 38

Muting Camera 18 Video 39

My Star Ranking 69 Registering faces 55

H

Half-pressing 7

HDMI size 115

HDTV 85

I

Icons 21

Imprint 115

Intelli-studio 88

ISO speed 48

L

Light source (White balance) 60

Long time shutter 36

M

Macro 49

Maintenance 118

Focus area Center AF 51 Multi AF 51 One touch shooting 51 Smart Touch AF 51

Focus distance Auto macro 49 Macro 49 Normal (AF) 49

Format 114

Frame guide 36

Frame rate 38

Function description 113

G

Gestures 23

Grid line 26, 113

Index

Appendixes 133

Video Out 115

Viewing les as thumbnails 71 on TV 84 Slide show 74 Smart album 70

Voice memo Playing 76 Recording 41

Volume 113

W

Website Accessing 101 Uploading photo 102

White balance 60

WLAN 95

Z

Zooming 28

Smart Scene Detection mode 40

Smart Touch AF 50

Smile shot 53

Special effects Add noise 81 Color lter 81 Elegant 81

Start image 113

T

Timer 45

Touching 22

Transferring les for Mac 91 for Windows 86

V

Video Playing 75 Recording 38

Service center 123

Settings Accessing 112 Camera 114 Display 113 Sound 113

Shooting mode Auto 27 DUAL IS 37 Movie 38 Program 38 Scene 34 Smart Auto 33

Shutter speed 36

Slide show 74

Smart Album 70

Smart Auto mode 33

Smart face recognition 54

Smart lter effect in Playback mode 80 in Shooting mode 64

R

Recording Video 38 Voice memo 41

Recycle bin 73

Red-eye in Playback mode 82 in Shooting mode 47

Reset 114

Resizing 78

Resolution Photo 43 Video 44

RGB tone in Playback mode 79 in Shooting mode 63

Rotating 73, 78

S

Scene mode 34

Self-portrait 53

Index

Please refer to the warranty that came with your product or visit our website http://www.samsung.com/ for after-sales service or inquiries.