Samsung DualView DV305 Camera User Manual PDF
en
Summary of Content for Samsung DualView DV305 Camera User Manual PDF
This user manual includes detailed usage instructions for your camera. Please read this manual thoroughly.
Click a topic
Basic troubleshooting
Quick reference
Contents
Basic functions
Extended functions
Shooting options
Playback/Editing
Wireless network (DV300F/DV305F only)
Settings
Appendixes
Index
DV300/DV300F/DV305/DV305F
1
Prevent damage to subjects eyesight. Do not use the ash in close proximity (closer than 1 m/3 ft) to people or animals. If you use the ash too close to your subjects eyes, this can cause temporary or permanent eyesight damage.
Keep your camera away from small children and pets. Keep your camera and all accessories out of the reach of small children and animals. Small parts may cause choking or serious injury if swallowed. Moving parts and accessories may present physical dangers as well.
Do not expose the camera to direct sunlight or high temperatures for an extended period of time. Prolonged exposure to sunlight or extreme temperatures can cause permanent damage to your cameras internal components.
Health and safety information Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.
Warningsituations that could cause injury to yourself or others
Do not disassemble or attempt to repair your camera. This may result in electric shock or damage to the camera.
Do not use your camera near ammable or explosive gases and liquids. This may cause a re or explosion.
Do not insert ammable materials into the camera or store these materials near the camera. This may cause a re or electric shock.
Do not handle your camera with wet hands. This may result in electric shock.
2
Avoid covering the camera or charger with blankets or clothes. The camera may overheat, which may distort the camera or cause a re.
Do not handle the power supply cord or go near the charger during a thunderstorm. This may result in electric shock.
If liquid or foreign objects enter your camera, immediately disconnect all power sources, such as the battery or charger, and then contact a Samsung service center.
Comply with any regulations that restrict the use of a camera in a certain area. Avoid interference with other electronic devices. Turn off the camera when in an aircraft. Your camera can cause
interference with aircraft equipment. Follow all airline regulations and turn off your camera when directed by airline personnel.
Turn off the camera near medical equipment. Your camera can interfere with medical equipment in hospitals or health care facilities. Follow all regulations, posted warnings, and directions from medical personnel.
Avoid interference with pacemakers. Maintain a minimum of 15 cm between this camera and all pacemakers to avoid potential interference, as recommended by the manufacturer and the independent research group, Wireless Technology Research. If you have any reason to suspect that your camera is interfering with a pacemaker or other medical device, turn off the camera immediately and contact the manufacturer of the pacemaker or medical device for guidance.
Health and safety information
3
Cautionsituations that could cause damage to your camera or other equipment
Remove the batteries from your camera when storing it for an extended period of time. Installed batteries may leak or corrode over time and cause serious damage to your camera.
Use only authentic, manufacturer-recommended, Lithium-ion replacement batteries. Do not damage or heat the battery. Inauthentic, damaged, or heated batteries may cause a re or personal injury.
Use only Samsung-approved batteries, chargers, cables and accessories. Using unauthorized batteries, chargers, cables or accessories
can cause batteries to explode, damage your camera, or cause injury.
Samsung is not responsible for damage or injuries caused by unapproved batteries, chargers, cables or accessories.
Use the battery only for its intended purpose. Misusing the battery may cause a re or electric shock.
Do not touch the ash while it res. The ash is very hot when red and may burn your skin.
When you use the AC charger, turn off the camera before you disconnect the power to the AC charger. Failing to do so may result in re or electric shock.
Disconnect the charger from the wall socket when not in use. Failing to do so may result in re or electric shock.
Do not use a damaged power supply cord, plug, or loose outlet when you charge batteries. This may cause a re or electric shock.
Do not allow the AC charger to come in contact with the +/- terminals on the battery. This may cause a re or electric shock.
Health and safety information
4
Health and safety information
Do not force the cameras parts or apply pressure to the camera. This may cause your camera to malfunction.
Exercise caution when you connect cables or adapters and install batteries and memory cards. If you force the connectors, improperly connect cables, or improperly install batteries and memory cards, you can damage ports, connectors, and accessories.
Keep cards with magnetic strips away from the camera case. Information stored on the card may be damaged or erased.
Never use a damaged charger, battery, or memory card. This may result in electric shock or camera malfunction or cause a re.
Check that the camera is operating properly before use. The manufacturer takes no responsibility for any loss of les or damage that may result from camera malfunction or improper use.
You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data.
Avoid interference with other electronic devices. Your camera emits radio frequency (RF) signals that may interfere with unshielded or improperly shielded electronic equipment, such as pacemakers, hearing aids, medical devices, and other electronic devices in homes or vehicles. Consult the manufacturers of your electronic devices to solve any interference problems you experience. To prevent unwanted interference, use only Samsung-approved devices or accessories.
Use your camera in the normal position. Avoid contact with your cameras internal antenna.
Data transference and your responsibilities Data transferred via WLAN could be leaked, so avoid
transferring sensitive data in public areas or on open networks. The camera manufacturer is not liable for any data transfers that
infringe on copyrights, trademarks, intellectual property laws, or public decency ordinances.
5
Copyright information Microsoft Windows and the Windows logo are
registered trademarks of the Microsoft Corporation. Mac is a registered trademark of the Apple Corporation. microSD, microSDHC, and microSDXC are
registered trademarks of the SD Association. Wi-Fi, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are
registered trademarks of the Wi-Fi Alliance. Trademarks and trade names used in this manual are
the property of their respective owners.
Camera specications or contents of this manual may be changed without prior notice due to upgrade of camera functions.
We recommend using your camera within the country where you purchased.
Use this camera responsibly and adhere to all laws and regulations concerning its use.
You are not allowed to reuse or distribute any part of this manual without prior permission.
For Open Source License information, refer to the OpenSourceInfo.pdf in the provided CD-ROM.
Outline of the User Manual
Basic functions 13 Learn about your cameras layout, icons, and basic functions for shooting.
Extended functions 37 Learn how to capture a photo and record a video by selecting a mode.
Shooting options 60 Learn how to set the options in Shooting mode.
Playback/Editing 83 Learn how to play back photos or videos, and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, or TV.
Wireless network (DV300F/DV305F only) 107 Learn to connect to wireless local area networks (WLANs) and use functions.
Settings 128 Refer to options to congure your cameras settings.
Appendixes 134 Get information about error messages, specications, and maintenance.
6
Icons used in this manual Icon Function
Additional information
Safety warnings and precautions
[ ] Camera buttons. For example, [Shutter] represents the shutter button.
( ) Page number of related information
The order of options or menus you must select to perform a step; for example: Select Face Detection Normal (represents Select Face Detection, and then select Normal).
* Annotation
Expressions used in this manual Pressing the shutter Half-press [Shutter]: Press the shutter halfway down Press [Shutter]: Press the shutter all the way down
Half-press [Shutter] Press [Shutter]
Subject, background, and composition Subject: The main object in a scene, such as a person,
animal, or still life Background: The objects around the subject Composition: The combination of a subject and background
Composition
Background
Subject
Exposure (Brightness) The amount of light that enters your camera determines the exposure. You can alter the exposure by changing the shutter speed, aperture value, or ISO sensitivity. By altering the exposure, your photos will be darker or lighter.
Normal exposure Overexposure (too bright)
7
Basic troubleshooting Learn to solve common problems by setting shooting options.
The subjects eyes appear red.
Red eye occurs when the subject's eyes reect light from the camera ash. Set the ash option to Red-eye or Red-eye Fix. (p. 64) If the photo has already been captured, select Red-eye Fix in the edit menu. (p. 97)
Photos have dust spots.
If dust particles are present in the air, you may capture them in photos when you use the ash. Turn off the ash or avoid capturing photos in a dusty place. Set ISO sensitivity options. (p. 66)
Photos are blurred. Blurring can occur if you capture photos in low light conditions or hold the camera incorrectly. Use the OIS function or half-press [Shutter] to ensure the subject is focused. (p. 35)
Photos are blurred when shooting at night.
As the camera tries to let in more light, the shutter speed slows. This can make it difcult to hold the camera steady long enough to capture a clear photo and may result in camera shake. Select Night Shot mode. (p. 51) Turn on the ash. (p. 64) Set ISO sensitivity options. (p. 66) Use a tripod to prevent your camera from shaking.
Subjects come out too dark because of backlighting.
When the light source is behind the subject or when there is a high contrast between light and dark areas, the subject may appear too dark. Avoid shooting toward the sun. Select Backlight in Scene mode. (p. 42) Set the ash option to Fill in. (p. 64) Adjust the exposure. (p. 74) Set the Auto Contrast Balance (ACB) option. (p. 75) Set the metering option to Spot if a subject is in the center of the frame. (p. 75)
8
Quick reference
Capturing photos of people
Picture in Picture mode 45 Self Shot mode 46 Children mode 48 Beauty Shot mode 50 Intelligent Portrait mode 51 Red-eye/Red-eye Fix (to prevent or correct
red-eye) 64 Face Detection 70
Capturing photos at night or in the dark
Scene mode > Sunset, Dawn 42 Night Shot mode 51 Flash options 64 ISO sensitivity (to adjust the sensitivity to light)
66
Capturing action photos
Continuous, Motion Capture 78
Capturing photos of text, insects, or owers
Scene mode > Text 42 Close-up Shot mode 52 Macro 67
Adjusting the exposure (brightness)
ISO sensitivity (to adjust the sensitivity to light) 66
EV (to adjust exposure) 74 ACB (to compensate for subjects against bright
backgrounds) 75 Metering 75 AEB (to capture 3 photos of the same scene
with different exposures) 78
Capturing photos of scenery
Scene mode > Landscape 42 Live Panorama mode 43
Applying effects to photos
Magic Frame mode 53 Funny Face mode 54 Photo Filter mode 55 Split Shot mode 57 Artistic Brush mode 58 Motion Photo mode 59 Image Adjust (to adjust Sharpness, Contrast,
or Saturation) 79
Applying effects to videos
Movie Filter mode 56
Reducing camera shake
Optical Image Stabilization (OIS) 33
Viewing les by category in Smart Album 86
Viewing les as thumbnails 87 Deleting all les on the memory 89 Viewing les as a slide show 91 Viewing les on a TV 99 Connecting your camera to a computer
100 Using photo or video sharing websites
(DV300F/DV305F only) 115 Sending photos or videos via email
(DV300F/DV305F only) 118 Adjusting sound and volume 130 Adjusting the brightness of the display
131 Changing the display language 132 Setting the date and time 132 Before contacting a service center 146
9
Contents
Extended functions .......................................................... 37 Using Basic modes ..................................................... 38
Using the Smart Auto mode ........................................ 38 Using the Program mode ............................................ 39 Using the Smart Movie mode ...................................... 40 Using the Movie mode ................................................ 41 Using the Scene mode ............................................... 42 Using the Live Panorama mode ................................... 43
Using Scene modes .................................................... 45 Using the Picture in Picture mode ................................ 45 Using the Self Shot mode ........................................... 46 Using the Children mode ............................................ 48 Using the Jump Shot mode ........................................ 48 Using the Beauty Shot mode ....................................... 50 Using the Intelligent Portrait mode ................................ 51 Using the Night Shot mode ......................................... 51 Using the Close-up Shot mode ................................... 52
Using Magic modes .................................................... 53 Using the Magic Frame mode ..................................... 53 Using the Funny Face mode ....................................... 54 Using the Photo Filter mode ....................................... 55 Using the Movie Filter mode ....................................... 56 Using the Split Shot mode .......................................... 57 Using the Artistic Brush mode ..................................... 58 Using the Motion Photo mode ..................................... 59
Basic functions ................................................................. 13 Unpacking ................................................................... 14 Camera layout ............................................................. 15 Inserting the battery and memory card ....................... 17 Charging the battery and turning on your camera ...... 18
Charging the battery ................................................... 18 Turning on your camera .............................................. 18
Performing the initial setup ......................................... 19 Learning icons ............................................................. 21 Using the Home screen ............................................... 22
Accessing the Home screen ....................................... 22 Icons on the Home screen .......................................... 23 Setting Wallpaper ....................................................... 25
Selecting options or menus ........................................ 26 Setting the display and sound .................................... 28
Setting the display type ............................................... 28 Setting the sound ....................................................... 29
Capturing photos ......................................................... 30 Turning on the front display .......................................... 31 Zooming .................................................................... 31 Reducing camera shake (OIS) ..................................... 33
Tips for getting a clearer photo ................................... 35
10
Contents
Shooting options .............................................................. 60 Selecting a resolution and quality ............................... 61
Selecting a resolution .................................................. 61 Selecting an image quality ........................................... 62
Using the timer ............................................................ 63 Shooting in the dark .................................................... 64
Preventing red-eye ..................................................... 64 Using the ash ........................................................... 64 Adjusting the ISO sensitivity ......................................... 66
Changing the cameras focus ..................................... 67 Using macro .............................................................. 67 Using tracking auto focus ............................................ 68 Adjusting the focus area .............................................. 69
Using Face Detection .................................................. 70 Detecting faces .......................................................... 70 Capturing a smile shot ................................................ 71 Detecting eye blinking ................................................. 71 Using Smart Face Recognition .................................... 72 Registering faces as your favorites (My Star) ................. 73
Adjusting brightness and color ................................... 74 Adjusting the exposure manually (EV) ........................... 74 Compensating for backlighting (ACB) ........................... 75 Changing the metering option ...................................... 75 Selecting a White Balance setting ................................ 76
Using burst modes ...................................................... 78 Adjusting images ......................................................... 79 Reducing the sound of the zoom ................................ 80 Available shooting options by shooting mode ............ 81
11
Contents
Playback/Editing ............................................................... 83 Viewing photos or videos in Playback mode .............. 84
Starting Playback mode .............................................. 84 Viewing photos .......................................................... 89 Playing a video ........................................................... 92
Editing a photo ............................................................ 94 Resizing photos ......................................................... 94 Cropping portraits automatically ................................... 94 Rotating a photo ......................................................... 95 Applying Smart Filter effects ........................................ 95 Adjusting your photos ................................................. 96 Creating a print order (DPOF) ....................................... 98
Viewing les on a TV ................................................... 99 Transferring les to your Windows computer ........... 100
Transferring les with Intelli-studio ............................... 101 Transferring les by connecting the camera as a removable disk ......................................................... 103 Disconnecting the camera (for Windows XP) ............... 104
Transferring les to your Mac computer ................... 105 Printing photos with a PictBridge photo printer ....... 106
Wireless network (DV300F/DV305F only) .................... 107 Connecting to a WLAN and conguring network settings ........................................................ 108
Connecting to a WLAN ............................................. 108 Using the login browser ............................................ 109 Network connection tips ........................................... 110 Entering text ............................................................. 111
Sending photos or videos to a smart phone ............ 112 Using a smart phone as a remote shutter release .... 113 Using photo or video sharing websites .................... 115
Accessing a website ................................................ 115 Uploading photos or videos ....................................... 115
Sending photos or videos via email .......................... 117 Changing email settings ............................................ 117 Sending photos or videos via email ............................ 118
Uploading photos to a cloud server .......................... 120 Using Auto Backup to send photos or videos ......... 121
Installing the program for Auto Backup on your PC ...... 121 Sending photos or videos to a PC ............................. 121
Viewing photos or videos on a TV Link-enabled TV ................................................... 123 Sending photos using Wi-Fi Direct ........................... 125 About the Wake on LAN (WOL) feature .................... 126
12
Contents
Settings ........................................................................... 128 Settings menu ........................................................... 129
Accessing the settings menu .................................... 129 Sound ..................................................................... 130 Display .................................................................... 130 Connectivity ............................................................. 131 General ................................................................... 132
Appendixes ..................................................................... 134 Error messages ......................................................... 135 Camera maintenance ................................................ 137
Cleaning your camera ............................................... 137 Using or storing the camera ...................................... 138 About memory cards ................................................ 139 About the battery ...................................................... 142
Before contacting a service center ........................... 146 Camera specications ............................................... 149 Glossary ..................................................................... 153 FCC notice ................................................................. 158 Declaration sentence in ofcial languages ............... 161 Index .......................................................................... 163
Unpacking 14
Camera layout 15
Inserting the battery and memory card 17
Charging the battery and turning on your camera 18
Charging the battery 18 Turning on your camera 18
Performing the initial setup 19
Learning icons 21
Using the Home screen 22 Accessing the Home screen 22 Icons on the Home screen 23 Setting Wallpaper 25
Selecting options or menus 26
Setting the display and sound 28 Setting the display type 28 Setting the sound 29
Capturing photos 30 Turning on the front display 31 Zooming 31 Reducing camera shake (OIS) 33
Tips for getting a clearer photo 35
Basic functions Learn about your cameras layout, icons, and basic functions for shooting.
Basic functions 14
Unpacking The following items are included in your product box.
Camera AC adapter/ USB cable
Rechargeable battery Strap
User Manual CD-ROM Quick Start Guide
Optional accessories
Camera case A/V cable
Memory card/Memory card adapter
The illustrations may differ slightly from the items shipped with your product.
The items included in the box may differ depending on the model. You can purchase optional accessories at a retailer or a Samsung
service center. Samsung is not responsible for any problems caused by using unauthorized accessories.
Basic functions 15
Camera layout Before you start, familiarize yourself with your cameras parts and their functions.
Battery chamber cover Insert a memory card and battery
Tripod mount
Flash
Lens
MicrophoneShutter button
AF-assist light/Timer lamp
Speaker
USB and A/V port Accepts USB cable and A/V cable
POWER button
Internal antenna* * Avoid contact with the internal antenna
while using the wireless network. (DV300F/DV305F only)
Front display
Front LCD button
Basic functions 16
Camera layout
Button Description
Basic functions Other functions
D Change the display option. Move up
c Change the macro option. Move down
F Change the ash option. Move left
t Change the timer option. Move right
Conrm the highlighted option or menu.
Status lamp Blinking: When the camera is
saving a photo or video, being read by a computer or printer, when the image is out of focus, or there is a problem charging the battery (On DV300F/DV305F, when the camera is connecting to WLAN or sending a photo)
Steady: When the camera is connected to a computer, charging the battery, or when the image is in focus
Zoom button In Shooting mode: Zoom in or out In Playback mode: Zoom in on part
of a photo or view les as thumbnails, or adjust the volume
Main display
Buttons (See the table below)
Attaching the strap
x
y
Button Description
Access the Home screen.
Access options or menus.
Enter Playback mode.
Delete les in Playback mode.
Basic functions 17
Inserting the battery and memory card Learn how to insert the battery and an optional memory card into the camera.
Removing the battery and memory card
Memory card
Push the card gently until it disengages from the camera, and then pull it out of the slot.
Rechargeable battery
Battery lock
Slide the lock to the right to release the battery.
You can use the internal memory for temporary storage if a memory card is not inserted.
Memory card
Insert a memory card with the gold-colored contacts facing up.
Rechargeable battery
Insert the battery with the Samsung logo facing up.
Basic functions 18
Charging the battery and turning on your camera
Turning on your camera Press [POWER] to turn your camera on or off. The initial setup screen appears when you turn on the camera
for the rst time. (p. 19)
Turning on your camera in Playback mode Press [P]. The camera turns on and immediately accesses Playback mode.
If you turn on your camera by pressing and holding [P] until the status lamp blinks, the camera does not emit any sounds.
Charging the battery Before you use the camera for the rst time, you must charge the battery. Plug the small end of the USB cable into your camera, and then plug the other end of the USB cable into the AC adapter.
Status lamp Red light on: Charging Red light off: Fully charged Red light blinking: Error
Use only the AC adapter and USB cable supplied with your camera. If you use another AC adapter (such as SAC-48), the camera battery may not charge or work properly.
Basic functions 19
Performing the initial setup When you turn on your camera for the rst time, the initial setup screen appears. Follow the steps below to congure the cameras basic settings.
4 Press [D/c] to select Home, and then press [o]. When you travel to another country, select Visit, and then
select a new time zone.
5 Press [F/t] to select a time zone, and then press [o] [m].
Cancel Set
Time Zone : Home
London
The screen may differ depending on the language selected.
1 Verify that Language is highlighted, and then press [t] or [o].
2 Press [D/c] to select a language, and then press [o].
3 Press [c] to select Time Zone, and then press [t] or [o].
Basic functions 20
Performing the initial setup
6 Press [c] to select Date/Time Set, and then press [t] or [o].
Cancel Set
Date/Time Set
Year Month Day Hour Min DST
The screen may differ depending on the language selected.
7 Press [F/t] to select an item.
8 Press [D/c] to set the date, time, and daylight- saving time, and then press [o].
9 Press [c] to select Date Type, and then press [t] or [o].
10 Press [D/c] to select a date type, and then press [o].
11 Press [c] to select Time Type, and then press [t] or [o].
12 Press [D/c] to select a time type, and then press [o].
13 Press [m] to nish the initial setup.
Basic functions 21
Learning icons The icons the camera displays on the screen change according to the mode you select or the options you set.
1
2
3
3 Shooting information
Icon Description
Current date
Current time
Front display is on
Available number of photos
Memory card inserted
: Fully charged : Partially charged : Empty (Recharge)
Aperture value
Shutter speed
Available recording time
Auto focus frame
Camera shake
Zoom indicator
Photo resolution when the Intelli zoom is on
Zoom ratio
2 Shooting options (right)
Icon Description
Intelli zoom on
Photo resolution
Video resolution
Metering
Frame rate
Flash
Sound Alive on
Optical Image Stabilization (OIS)
Auto focus option
Image adjustment (sharpness, contrast, and saturation)
Timer
1 Shooting options (left)
Icon Description
Shooting mode
Exposure value adjusted
ISO sensitivity
White balance
Face detection
Face tone
Burst option
Basic functions 22
Using the Home screen You can select a shooting mode or access the settings menu by selecting the icons on the Home screen.
No. Description
1
Current Home screen Rotate [Zoom] to the left or right to switch to another
Home screen. Press [D] to scroll to the Home screen name, and
then press [F/t] to switch to another Home screen. Press [F/t] repeatedly to switch to another Home
screen.
2 Mode icons Press [D/c/F/t] to scroll to a desired mode, and
then press [o] to access the mode.
Accessing the Home screen In Shooting or Playback mode, press [h]. Press [h] again to return to the previous mode.
1
2 Smart Auto
Scene
Program
Live Panorama
Smart Movie Movie
Back Page Move
Settings
Album Wi-FiBasic
Basic functions 23
Using the Home screen
Icons on the Home screen
Icon Description
Smart Auto: Capture a photo with a scene mode selected automatically by the camera. (p. 38)
Program: Capture a photo with settings you have adjusted manually. (p. 39)
Smart Movie: Record a video with a scene mode selected automatically by the camera. (p. 40)
Movie: Record a video. (p. 41)
Scene: Capture a photo with options that are preset for a specic scene. (p. 42)
Live Panorama: Capture and combine a series of photos to create a panoramic image. (p. 43)
Settings: Adjust settings to match your preferences. (p. 129)
Icon Description
MobileLink: Send photos or videos to a smart phone. (p. 112)
Remote Viewnder: Use a smart phone as a remote shutter release and see a preview on your smart phone of an image from your camera. (p. 113)
Social Sharing: Upload photos or videos to le sharing websites. (p. 115)
Email: Send photos or videos stored on the camera via email. (p. 117)
Cloud: Upload photos to a cloud server. (p. 120)
Auto Backup: Send photos or videos that you captured with the camera to a PC wirelessly. (p. 121)
TV Link: View photos or videos that you captured with the camera on a widescreen TV. (p. 123)
Basic functions 24
Using the Home screen
Icon Description
Picture in Picture: Capture a background photo and insert a smaller photo or video into the foreground. (p. 45)
Self Shot: Use the front display when you capture a self portrait. (p. 46)
Children: Attract childrens attention with a short animation on the front display. (p. 48)
Jump Shot: Let your subjects know the best moment to jump with a countdown on the front display. (p. 48)
Beauty Shot: Capture a portrait with options to hide facial imperfections. (p. 50)
Intelligent Portrait: Save 2 additional portraits automatically using the face detection functions. (p. 51)
Night Shot: Capture a night scene by adjusting shutter speed. (p. 51)
Close-up Shot: Capture close-up photos of subjects. (p. 52)
Icon Description
Magic Frame: Capture a photo with various frame effects. (p. 53)
Funny Face: Capture a photo with funny face effects. (p. 54)
Photo Filter: Capture a photo with various lter effects. (p. 55)
Movie Filter: Record a video with various lter effects. (p. 56)
Split Shot: Capture several photos and arrange them with preset layouts. (p. 57)
Artistic Brush: Capture a photo and save a video that shows how to apply the lter effect. (p. 58)
Motion Photo: Capture and combine a series of photos, and then select an area to be animated to create a GIF animation. (p. 59)
Icon Description
Album: View les by category in Smart album. (p. 86)
Photo Editor: Edit photos with various effects. (p. 95)
Basic functions 25
Using the Home screen
Setting Wallpaper Set wallpaper for the Home screen with the desired image.
1 On the Home screen, scroll to
2 Select .
3 Select Display Wallpapers.
4 Select an option.
Option Description
Wallpaper Gallery Select the desired wallpaper from the default gallery.
Album Set a photo you have captured as wallpaper.
5 Scroll to the desired wallpaper, and then press [o]. If you select a photo you have captured, you can set a
specied area as wallpaper. Rotate [Zoom] to the left or right to reduce or enlarge the area. Press [D/c/F/t] to move the area.
6 Press [o] to save.
You can also set the photo you are viewing as wallpaper by pressing [m], and then selecting Set Wallpaper in Playback mode.
Basic functions 26
Selecting options or menus To select an option or a menu, press [m], and then press [D/c/F/t] or [o].
Going back to the previous menu
Press [m] to go back to the previous menu.
Half-press [Shutter] to return to Shooting mode.
1 In Shooting mode, press [m].
2 Select an option or a menu. To move up or down, press [D] or [c]. To move left or right, press [F] or [t].
3 Press [o] to conrm the highlighted option or menu.
Basic functions 27
Selecting options or menus
4 Press [D/c] to select White Balance, and then press [t] or [o].
EV
White Balance
ISO
Flash
Focus
Focus Area
Exit Select
5 Press [F/t] to select a White Balance option.
Back Select
White Balance : Daylight
6 Press [o] to save your settings.
For example, to select a White Balance option in Program mode:
1 On the Home screen, scroll to
2 Select .
3 Press [m].
Exit Select
EV
White Balance
ISO
Flash
Focus
Focus Area
Basic functions 28
Setting the display and sound Learn how to change the basic display information and sound settings.
Setting the option display view You can hide or show the option display appearing in some modes.
Press [o] repeatedly. Hide the option display. Show the option display.
Option display
Landscape
Panel off
For example, in Scene mode
Setting the display type You can select a display type for the Shooting or Playback mode. Each type displays different shooting or playback information. See the table below.
Press [D] repeatedly to change the display type.
Mode Display type
Shooting Hide all information about shooting options. Show all information about shooting options.
Playback
Hide all information about the current le. Hide all information about the current le except
basic information. Show all information about the current le.
Basic functions 29
Setting the display and sound
Setting the sound Turn the sound your camera emits when you perform functions on or off.
1 On the Home screen, scroll to
2 Select .
3 Select Sound Beep Sound.
4 Select an option.
Option Description
Off The camera does not emit any sounds.
On The camera emits sounds.
Basic functions 30
Capturing photos Learn how to capture photos easily and quickly in Smart Auto mode.
5 Press [Shutter] to capture a photo.
6 Press [P] to view the captured photo. To delete the photo, press [f], and then select Yes.
7 Press [P] to return to Shooting mode.
See page 35 for tips to get clearer photos.
1 On the Home screen, scroll to
2 Select .
3 Align your subject in the frame.
4 Half-press [Shutter] to focus. A green frame means the subject is in focus. A red frame means the subject is out of focus.
Basic functions 31
Capturing photos
Zooming You can capture close-up photos by adjusting the zoom.
Zoom out Zoom in
Zoom ratio
When you rotate the zoom button, the zoom ratio shown on the screen may change inconsistently.
Turning on the front display The front display helps you capture photos while viewing yourself.
In Shooting mode, press [F.LCD]. Press [F.LCD] again to turn it off.
Several buttons are not available when the front display turns on. In Self Shot, Children, and Jump Shot modes, the front display will
activate automatically. When you set timer options, the front display will remain active. (p. 63) When you use the camera in brightly lit or sunny areas, you may not
be able to see the front display clearly. The front display will not activate when you press [F.LCD] in Playback
mode. When the front display is on, the camera consumes more battery
power.
Basic functions 32
Capturing photos
Digital zoom The Digital zoom is supported by default in Shooting mode. If you zoom in on a subject in Shooting mode and the zoom indicator is in the digital range, your camera is using the Digital zoom. By using both the 5X Optical zoom and 5X Digital zoom, you can zoom in up to 25 times.
Zoom indicator
Optical range
Digital range
The Digital zoom is not available with the Tracking AF option. If you capture a photo with the Digital zoom, the photo quality may be
lower than normal.
Intelli zoom If the zoom indicator is in the Intelli range, your camera is using the Intelli zoom. Photo resolution varies according to the zoom rate if you use the Intelli zoom. By using both the Optical zoom and Intelli zoom, you can zoom in up to 10 times.
Zoom indicator
Optical range
Intelli range
Photo resolution when the Intelli zoom is on
Intelli zoom is not available with the Tracking AF option. The Intelli zoom helps you capture a photo with less quality
deterioration than the Digital zoom. However, the photo quality may be lower than when you use the Optical zoom.
The Intelli zoom is available only when you set a 4:3 resolution ratio. If you set another resolution ratio with Intelli zoom on, the Intelli zoom will be turned off automatically.
Basic functions 33
Capturing photos
Setting Intelli zoom
1 In Shooting mode, press [m].
2 Select Intelli Zoom.
3 Select an option.
Icon Description
Off: The Intelli zoom is deactivated.
On: The Intelli zoom is activated.
Reducing camera shake (OIS) Reduce camera shake optically in Shooting mode.
Before correction After correction
1 In Shooting mode, press [m].
2 Select OIS.
3 Select an option.
Icon Description
Off: OIS is deactivated.
On: OIS is activated.
Basic functions 34
Capturing photos
OIS may not function properly when: - you move your camera to follow a moving subject - you use the Digital zoom - there is too much camera shake - the shutter speed is slow (for example, when you capture night
scenes) - the battery is low - you capture a close-up shot
If you use the OIS function with a tripod, your images may be blurred by the vibration of the OIS sensor. Deactivate the OIS function when you use a tripod.
If the camera is hit or dropped, the display will be blurry. If this occurs, turn off the camera, and then turn it on again.
Basic functions 35
Holding your camera correctly
Ensure nothing is blocking the lens, ash, or microphone.
Half-pressing the shutter button
Half-press [Shutter] and adjust the focus. The camera adjusts the focus and exposure automatically.
The camera sets the aperture value and shutter speed automatically.
Focus frame Press [Shutter] to capture the photo
if the focus frame appears in green. Change the composition and half-
press [Shutter] again if the focus frame appears in red.
Reducing camera shake
Set the Optical Image Stabilization option to reduce camera shake optically. (p. 33)
When is displayed
Camera shake
When you shoot in the dark, avoid setting the ash option to Slow Sync or Off. The aperture remains open longer and it may be harder to hold the camera steady long enough to capture a clear photo. Use a tripod or set the ash option to Fill in. (p. 64) Set ISO sensitivity options. (p. 66)
Tips for getting a clearer photo
Basic functions 36
Preventing your subject from being out of focus
It may be difcult to get your subject in focus when: - there is little contrast between the subject and background (for example, when your subject is wearing clothing that is similar in color to the background)
- the light source behind the subject is too bright - the subject is shiny or reective - the subject includes horizontal patterns, such as blinds - the subject is not positioned in the center of the frame
When you capture photos in low light
Turn on the ash. (p. 64)
When subjects are moving rapidly
Using the focus lock Half-press [Shutter] to focus. When the subject is in focus, you can reposition the frame to change the composition. When you are ready, press [Shutter] to capture your photo.
Use the Continuous or Motion Capture function. (p. 78)
Extended functions Learn how to capture a photo and record a video by selecting a mode.
Using Basic modes 38 Using the Smart Auto mode 38 Using the Program mode 39 Using the Smart Movie mode 40 Using the Movie mode 41 Using the Scene mode 42 Using the Live Panorama mode 43
Using Scene modes 45 Using the Picture in Picture mode 45 Using the Self Shot mode 46 Using the Children mode 48 Using the Jump Shot mode 48 Using the Beauty Shot mode 50 Using the Intelligent Portrait mode 51 Using the Night Shot mode 51 Using the Close-up Shot mode 52
Using Magic modes 53 Using the Magic Frame mode 53 Using the Funny Face mode 54 Using the Photo Filter mode 55 Using the Movie Filter mode 56 Using the Split Shot mode 57 Using the Artistic Brush mode 58 Using the Motion Photo mode 59
Extended functions 38
Using Basic modes Capture photos or record videos using basic modes. You can also use the Scene mode and the Live Panorama mode.
Icon Description
Landscapes at night
Portraits at night
Landscapes with backlighting
Portraits with backlighting
Portraits
Close-up photos of objects
Close-up photos of text
Sunsets
Blue skies
Forested areas
Close-up photos of colorful subjects
Camera is stabilized or on a tripod (when shooting in the dark)
Actively moving subjects
Fireworks (when using a tripod)
Using the Smart Auto mode In Smart Auto mode, your camera automatically chooses the appropriate camera settings based on the type of scene it detects. The Smart Auto mode is helpful if you are not familiar with the camera settings for various scenes.
1 On the Home screen, scroll to
2 Select .
3 Align your subject in the frame. The camera automatically selects a scene. An appropriate
scene icon appears at the top left of the screen. The icons are listed below.
Icon Description
Landscapes
Scenes with bright white backgrounds
Extended functions 39
Using Basic modes
4 Half-press [Shutter] to focus.
5 Press [Shutter] to capture the photo.
If the camera does not recognize an appropriate scene mode, it uses the default settings for Smart Auto mode.
Even if it detects a face, the camera may not select a portrait mode depending on the subject's position or lighting.
The camera may not select the correct scene depending on the shooting conditions, such as camera shake, lighting, or distance to the subject.
Even if you use a tripod, the camera may not detect the mode if the subject is moving.
In Smart Auto mode, the camera consumes more battery power, because it changes settings often to select appropriate scenes.
Using the Program mode In Program mode, you can set most options, except the shutter speed and aperture value, which the camera sets automatically.
1 On the Home screen, scroll to
2 Select .
3 Set the desired options. For a list of options, refer to "Shooting options". (p. 60)
4 Align your subject in the frame, and then half-press [Shutter] to focus.
5 Press [Shutter] to capture the photo.
Extended functions 40
Using Basic modes
Using the Smart Movie mode In Smart Movie mode, your camera automatically chooses the appropriate camera settings based on the scene it has detected.
1 On the Home screen, scroll to
2 Select .
3 Align your subject in the frame. The camera automatically selects a scene. An appropriate
scene icon will appear at the top left of the screen.
Icon Description
Landscapes
Sunsets
Blue skies
Forested areas
4 Press [Shutter] to start recording.
5 Press [Shutter] again to stop recording.
If the camera does not recognize an appropriate scene mode, it uses the default settings for Smart Movie mode.
The camera may not select the correct scene depending on the shooting conditions, such as camera shake, lighting, and distance to the subject.
Extended functions 41
Using Basic modes
1 On the Home screen, scroll to
2 Select .
3 Set desired options. For a list of options, refer to "Shooting options". (p. 60)
4 Press [Shutter] to start recording.
5 Press [Shutter] again to stop recording.
Using the Movie mode In Movie mode, you can customize settings to record HD videos of up to 20 minutes in length. The camera saves recorded videos as MP4 (H.264) les.
H.264 (MPEG-4 part10/AVC) is a high-compression video format established by the international standards organizations ISO-IEC and ITU-T.
Some memory cards may not support high denition recording. If your card does not, set a lower resolution.
Memory cards with slow writing speeds will not support high- resolution videos. To record high-resolution videos, use memory cards with faster write speeds.
If you activate the OIS function while recording a video, the camera may record the operating sound of the OIS function.
If you use the zoom function when recording a video, the camera may record the noise of the zoom operating. To decrease zoom noise, use the Sound Alive function. (p. 80)
Extended functions 42
Using Basic modes
Pause recording The camera allows you to temporarily pause a video while recording. With this function, you can record separate scenes as a single video.
Press [o] to pause while recording. Press [o] to resume.
Using the Scene mode In Scene mode, you can capture a photo with options that are preset for a specic scene.
1 On the Home screen, scroll to
2 Select .
3 Select a scene.
Landscape
Panel off
Extended functions 43
Using Basic modes
Option Description
Landscape Capture still-life scenes and landscapes.
Sunset Capture scenes at sunset, with natural-looking reds and yellows.
Dawn Capture scenes at sunrise.
Backlight Capture backlit subjects.
Beach & Snow Reduce underexposure of subjects caused by sunlight reected from sand or snow.
Text Clearly capture text from printed or electronic documents.
4 Align your subject in the frame, and then half-press [Shutter] to focus.
5 Press [Shutter] to capture the photo.
Using the Live Panorama mode In Live Panorama mode, you can capture a wide panoramic scene in a single photo. Capture and combine a series of photos to create a panoramic image.
Shooting example
1 On the Home screen, scroll to
2 Select .
3 Align your subject in the frame, and then half-press [Shutter] to focus. Align the camera with the far left or the far right, or very top or
bottom, of the scene you want to capture.
4 Press and hold [Shutter] to start shooting.
Extended functions 44
Using Basic modes
5 With [Shutter] pressed, slowly move the camera in the direction that will let it capture the rest of the panorama. When the viewnder is aligned with the next scene, the
camera captures the next photo automatically.
6 When you are nished, release [Shutter]. When you have captured all the necessary shots, the camera
combines them into one panoramic photo.
For best results when capturing panoramic photos, avoid the following: - moving the camera too quickly or too slowly - moving the camera too little to capture the next image - moving the camera at irregular speeds - shaking the camera - changing the camera direction while capturing a photo - shooting in dark places - capturing moving subjects nearby - shooting conditions where the brightness or color of light is
changing Selecting Live Panorama mode will disable the digital and optical zoom
functions. If you select Live Panorama mode while the lens is zoomed in, the camera automatically zooms out to the default position.
In Live Panorama mode, some shooting options are not available. The camera may stop shooting due to the shooting composition or
movement within the scene. In Live Panorama mode, your camera may not capture the last scene
in its entirety if you stop moving the camera exactly where you want the scene to end. To capture the entire scene, move your camera slightly beyond the point where you want the scene to end.
Extended functions 45
Using Scene modes Capture photos by using the front display or selecting appropriate modes for various scenes.
4 Press [o] to set the photo as the background image. To recapture a background photo, press [m].
Retake Move Frame
5 Press [o], and then press [D/c/F/t] to change the insertion point.
6 Press [o], and then press [D/c/F/t] to change the insertion size.
7 Press [o] to save the setting.
Using the Picture in Picture mode In Picture in Picture mode, you can capture or select a full-sized background photo, and then insert a smaller photo or video into the foreground.
1 On the Home screen, scroll to
2 Select . To set the nal video size when inserting a video, press
[m], and then select Movie Size a desired video size.
3 Half-press [Shutter] to focus, and then press [Shutter] to capture a background photo. To select a background photo from your saved photos, press
[m], and then select Open Image a desired photo. You cannot select a video le or a photo captured in Live Panorama mode.
Extended functions 46
Using Scene modes
Using the Self Shot mode Conveniently capture photos of yourself with the front display.
1 On the Home screen, scroll to
2 Select . Your camera will automatically detect your face and display a
frame to indicate the detected face.
3 Half-press [Shutter] to focus.
4 Press [Shutter] to capture the photo.
In Self Shot mode, the front display will activate automatically.
8 Half-press [Shutter] to focus, and then press [Shutter] to capture and insert a photo. The insertion window appears larger when you half-press
[Shutter], so that you can determine whether or not the subject is in focus.
To record a video, press [c]. To stop recording and insert the video, press [c] again.
When capturing background photos, the resolution is automatically set to and all photos captured are saved.
The nal Picture-in-picture photos or videos are saved as one combined le and the inserted photos or videos are not saved separately.
When inserting an image, the resolution for the combined le is automatically set to .
When inserting a video, the resolution for the combined le is automatically set to or smaller.
When capturing a background photo, a vertical photo captured in the vertical position is displayed horizontally without auto rotate.
The maximum size of the insertion window is 1/4 of the screen, and the aspect ratio stays the same when changing the size.
The maximum length of video that can be inserted is 20 minutes. In Picture in Picture mode, the available zoom range may be less than
in other shooting modes. In Picture in Picture mode, you cannot set the Sound Alive options. When you select a background photo from your saved photos,
black bars may appear at the edges of the image, depending on the aspect ratio.
Extended functions 47
Using Scene modes
Capturing an Easy Self Shot If you press [F.LCD] when the power is off, the front display turns on in Easy Self Shot mode. Because the main display is off, the camera consumes less battery power and you can prevent others from viewing the main display. The camera will turn off when you press [F.LCD] again or press
[POWER]. The front display will turn off and the main display will turn on
when you press [h].
Customizing the front display You can let subjects know when to smile or attract their attention to the lens.
1 In Shooting mode, press [m].
2 Select Half Shutter an option.
Half Shutter
Off
Smile Icon
Eyesight catching
Back Select
Icon Description
Off: No icon will appear on the front display.
Smile Icon: Set an icon to appear that prompts the subject to smile.
Eyesight catching: Set an icon to appear to attract the subjects attention to the lens.
Extended functions 48
Using Scene modes
Using the Children mode The Children mode attracts children by showing a short animation on the front display.
1 On the Home screen, scroll to
2 Select . The front display will activate and play the preset animation.
3 Press [m].
4 Select Background Music an option.
5 Align your subject in the frame, and then half-press [Shutter] to focus.
6 Press [Shutter] to capture the photo.
You can download animations for the front display from Intelli-studio. (p. 102)
Using the Jump Shot mode Capture a photo of people jumping. An icon will appear on the front display to tell your subjects when to jump.
1 On the Home screen, scroll to
2 Select . To capture animated jump shots, refer to
"Capturing animated jump shots". (p. 49)
3 Press [Shutter]. The AF-assist light/timer lamp blinks. The front display will start a countdown a few seconds before
shooting.
Extended functions 49
Using Scene modes
4 Jump when the jump icon appears on the front display. The camera will capture multiple shots.
If you are capturing photos using the jump shot timer in low light conditions or indoors, photos may appear dark.
Use a tripod to prevent your camera from shaking.
Capturing animated jump shots Capture multiple jump shots, and then save them as a GIF animation. This feature is available only when you insert a memory card into the camera.
1 In Jump Shot mode, press [m].
2 Select Jump Shot GIF animation. The camera saves an animated GIF and one JPG of the
middle scene from the GIF le. You cannot view the JPG le on your camera. To view it, connect your camera to a PC. (p. 101)
If you select GIF animation, the resolution is automatically set to .
If you select GIF animation, it may take longer to save les. Use a tripod to prevent your camera from shaking.
Extended functions 50
Using Scene modes
Using the Beauty Shot mode In Beauty Shot mode, you can capture a portrait with options to hide facial imperfections.
1 On the Home screen, scroll to
2 Select .
3 Press [F/t] to adjust Face Retouch. For example, increase the face retouch setting to hide more
imperfections.
Panel off
Face Retouch : 2
4 Press [m].
5 Select Face Tone.
6 Press [F/t] to adjust Face Tone. For example, increase the face tone setting to make skin
appear lighter.
Face Tone : 2
Cancel Set
7 Press [o] to save the setting.
8 Align your subject in the frame, and then half-press [Shutter] to focus.
9 Press [Shutter] to capture the photo.
Extended functions 51
Using Scene modes
Using the Intelligent Portrait mode In Intelligent Portrait mode, the camera detects the face of a subject and automatically enlarges the face, crops the photo around the face, and then saves the original photo and 2 portraits in 3 separate les. You can use Intelligent Portrait mode to extract and save close-up portraits of a single individual from landscape shots.
1 On the Home screen, scroll to
2 Select .
3 Align your subject in the frame, and then half-press [Shutter] to focus.
4 Press [Shutter] to capture the photo. The original photo and 2 cropped photos are saved under
consecutive le names.
The Intelligent Portrait mode will save only the original photo if: - no face is detected - more than 2 faces are detected - the detected facial area is larger than a certain ratio
The cropped photos maintain the same aspect ratio (16:9) as the original or the inverse aspect ratio (9:16).
In Intelligent Portrait mode, it may take longer to save les.
Using the Night Shot mode In Night Shot mode, you can use a slow shutter speed to extend the time the shutter stays open. Increase the aperture value to prevent overexposure.
1 On the Home screen, scroll to
2 Select .
3 Press [F/t] to adjust the shutter speed.
Shutter Speed : 1 sec
Panel off
4 Align your subject in the frame, and then half-press [Shutter] to focus.
5 Press [Shutter] to capture the photo.
Use a tripod to prevent blurry photos.
Extended functions 52
Using Scene modes
Using the Close-up Shot mode In Close-up Shot mode, you can capture close-up photos of subjects, such as owers or insects.
1 On the Home screen, scroll to
2 Select .
3 Align your subject in the frame, and then half-press [Shutter] to focus.
4 Press [Shutter] to capture the photo.
Extended functions 53
Using Magic modes Capture a photo or record a video with various effects.
4 Align your subject in the frame, and then half-press [Shutter] to focus.
5 Press [Shutter] to capture the photo.
In Magic Frame mode, the resolution is automatically set to .
Using the Magic Frame mode In Magic Frame Shot mode, you can apply various frame effects to your photos. The shape and the feel of the photos will change according to the frame you select.
1 On the Home screen, scroll to
2 Select .
3 Select a desired frame.
Mural
Panel off
Extended functions 54
Using Magic modes
Using the Funny Face mode Capture a photo with effects that distort the face.
1 On the Home screen, scroll to
2 Select .
3 Aim the camera at a face.
4 Select a desired effect.
Panel off
5 Press [m].
6 Select Distortion Level.
7 Press [F/t] to adjust Distortion Level.
8 Press [o] to save the setting.
9 Half-press [Shutter] to focus.
10 Press [Shutter] to capture the photo.
The Funny Face mode does not work if no face is detected. When several faces are detected, it is applied to the closest face only.
Extended functions 55
Using Magic modes
Using the Photo Filter mode Apply various lter effects to your photos to create unique images.
Miniature Vignetting
Fish-eye Sketch
1 On the Home screen, scroll to
2 Select .
3 Select an effect.
Option Description
Miniature Apply a tilt-shift effect to make the subject appear in miniature.
Vignetting Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras.
Ink Painting Apply a watercolor painting effect.
Oil Painting Apply an oil painting effect.
Cartoon Apply a cartoon painting effect.
Cross Filter Add lines that radiate outward from bright objects to imitate the visual effect of a cross lter.
Sketch Apply a pen sketch effect.
Soft Focus Hide facial imperfections or apply dreamy effects.
Fish-eye Blacken the edges of the frame and distort objects to imitate the visual effect of a sheye lens.
Old Film Apply a vintage lm effect.
Half Tone Dot Apply a halftone effect.
Classic Apply a black and white effect.
Retro Apply a sepia tone effect.
Zooming Shot Blur the edges of a photo to emphasize the subjects in the center.
Extended functions 56
Using Magic modes
4 Align your subject in the frame, and then half-press [Shutter] to focus.
5 Press [Shutter] to capture a photo.
Depending on the option you select, the resolution may change to or smaller automatically.
Using the Movie Filter mode Apply various lter effects to your videos to create unique images.
1 On the Home screen, scroll to
2 Select .
3 Select an effect.
Option Description
Miniature Apply a tilt-shift effect to make the subject appear in miniature.
Vignetting Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras.
Half Tone Dot Apply a halftone effect.
Option Description
Sketch Apply a pen sketch effect.
Fish-eye Distort close objects to imitate the visual effect of a sheye lens.
Classic Apply a black and white effect.
Retro Apply a sepia tone effect.
Palette Effect 1 Create a vivid look with sharp contrast and strong color.
Palette Effect 2 Make scenes clean and clear.
Palette Effect 3 Apply a soft brown tone.
Palette Effect 4 Create a cold and monotone effect.
4 Press [Shutter] to start recording.
5 Press [Shutter] again to stop recording.
If you select Miniature, the miniature recording time is also displayed and is shorter than the real recording time.
If you select Miniature, you cannot record the video sound. Depending on the option you select, the recording speed may change
to and the recording resolution may change to or smaller automatically.
Extended functions 57
Using Magic modes
4 Align your subject in the frame, and then half-press [Shutter] to focus.
5 Press [Shutter] to capture a photo. Repeat steps 4 and 5 to capture the rest of the photos. To recapture a photo, press [f].
In Split Shot mode, the resolution is automatically set to or smaller. In Split Shot mode, the available zoom range may be less than in other
shooting modes.
Using the Split Shot mode In Split Shot mode, you can capture several photos and arrange them with preset layouts.
1 On the Home screen, scroll to
2 Select .
3 Select a split style. To adjust the sharpness of the dividing line, press [m],
and then select Line Blur a desired value. To apply a Smart Filter effect to part of the shot, press
[m], and then select Smart Filter a desired option. You can apply different Smart Filter effects to each part of the shot.
Panel off
Extended functions 58
Using Magic modes
4 Align your subject in the frame, and then half-press [Shutter] to focus.
5 Press [Shutter] to capture a photo. After capturing the photo, the video that shows how to apply
the lter will begin automatically.
In Artistic Brush mode, the resolution is automatically set to or smaller.
In Artistic Brush mode, both the photo with the lter effect and the video that shows how to apply the lter effect are saved.
In Artistic Brush mode, the available zoom range may be less than in other shooting modes.
In Artistic Brush mode, it may take longer to save les. You cannot upload a video captured in Artistic Brush mode via the
wireless networking feature on your camera. (DV300F/DV305F)
Using the Artistic Brush mode In Artistic Brush mode, you can capture a photo, and then view a video that shows how to apply the lter effect.
1 On the Home screen, scroll to
2 Select .
3 Select a lter.
Ink Painting
Panel off
Option Description
Ink Painting Apply a watercolor painting effect.
Cartoon Apply a cartoon painting effect.
Sketch Apply a pen sketch effect.
Extended functions 59
Using Magic modes
Using the Motion Photo mode In Motion Photo mode, you can capture and combine a series of photos, and then select an area to be animated to create a GIF animation. This mode is available only when you insert a memory card into the camera.
1 On the Home screen, scroll to
2 Select .
3 Align your subject in the frame, and then half-press [Shutter] to focus.
4 Press [Shutter] to capture the photo. The camera captures multiple photos while the status lamp
is blinking.
5 Press [D/c/F/t] to scroll to an area to be animated.
6 Rotate [Zoom] to the left or right to reduce or enlarge the area.
Cancel Save
Frame Size
7 Press [o] to save the photo. The camera saves an animated GIF and one JPG of the rst
scene from the GIF le. You cannot view the JPG le on your camera. To view it, connect your camera to a PC. (p. 101)
In Motion Photo mode, the resolution is automatically set to . Use a tripod to prevent your camera from shaking. In Motion Photo mode, it may take longer to save les.
Selecting a resolution and quality 61 Selecting a resolution 61 Selecting an image quality 62
Using the timer 63
Shooting in the dark 64 Preventing red-eye 64 Using the ash 64 Adjusting the ISO sensitivity 66
Changing the cameras focus 67 Using macro 67 Using tracking auto focus 68 Adjusting the focus area 69
Using Face Detection 70 Detecting faces 70 Capturing a smile shot 71 Detecting eye blinking 71
Using Smart Face Recognition 72 Registering faces as your favorites (My Star) 73
Adjusting brightness and color 74 Adjusting the exposure manually (EV) 74 Compensating for backlighting (ACB) 75 Changing the metering option 75 Selecting a White Balance setting 76
Using burst modes 78
Adjusting images 79
Reducing the sound of the zoom 80
Available shooting options by shooting mode 81
Shooting options Learn how to set the options in Shooting mode.
Shooting options 61
Selecting a resolution and quality Learn how to change the image resolution and quality settings.
Setting the video resolution
1 In Video Shooting mode, press [m].
2 Select Movie Size.
3 Select an option.
Icon Description
1280 X 720: HD les to play back on an HDTV.
640 X 480: SD les to play back on an analog TV.
320 X 240: Post on a web page.
For Sharing (DV300F/DV305F only): Post on a website using the wireless network (30 seconds maximum).
Selecting a resolution As you increase the resolution, your photo or video will include more pixels, so it can be printed on larger paper or displayed on a larger screen. When you use a high resolution, the le size will also increase.
Setting the photo resolution
1 In Shooting mode, press [m].
2 Select Photo Size.
3 Select an option.
Icon Description
4608 X 3456: Print on A1 paper.
4608 X 3072: Print on A1 paper in wide ratio (3:2).
4608 X 2592: Print on A1 paper in panorama ratio (16:9) or play back on an HDTV.
3648 X 2736: Print on A2 paper.
2592 X 1944: Print on A4 paper.
1984 X 1488: Print on A5 paper.
1920 X 1080: Print on A5 paper in panorama ratio (16:9) or play back on an HDTV.
1024 X 768: Attach to an email.
Shooting options 62
Selecting a resolution and quality
Selecting an image quality Set the photo and video quality settings. Higher image quality settings will result in larger le sizes.
Setting the photo quality The camera compresses and saves the photos you capture in the JPEG format.
1 In Shooting mode, press [m].
2 Select Quality.
3 Select an option.
Icon Description
Super Fine: Capture photos in super high quality.
Fine: Capture photos in high quality.
Normal: Capture photos in normal quality.
Setting the video quality The camera compresses and saves the videos you record in MP4 (H.264) format.
1 In Video Shooting mode, press [m].
2 Select Frame Rate.
3 Select an option.
Icon Description
30 FPS: Record 30 frames per second.
15 FPS: Record 15 frames per second.
Shooting options 63
Using the timer Learn how to set the timer to delay shooting.
3 Press [Shutter] to start the timer. The AF-assist light/timer lamp blinks. The camera will
automatically capture a photo after the specied time has elapsed.
The front display will start a countdown before shooting.
Press [Shutter] or [t] to cancel the timer. Depending on the Face Detection options you selected, the timer
function may not be available. In some modes, you can also set the timer option by pressing
[m], and then selecting Timer.
1 In Shooting mode, press [t].
Back Select
Timer Off 10 Sec
2 Sec Double
2 Select an option.
Icon Description
Off: The timer is not active.
10 Sec: Capture a photo after a 10-second delay.
2 Sec: Capture a photo after a 2-second delay.
Double: Capture one photo after a 10-second delay and another photo after a 2-second delay.
Available options may differ depending on the shooting conditions.
Shooting options 64
Shooting in the dark Learn how to capture photos at night or in low light conditions.
Using the ash Use the ash when you capture photos in the dark or when you need more light in your photos.
1 In Shooting mode, press [F].
Back Select
Flash Off
Auto
Red-eye
Fill in
Slow Sync
Red-eye Fix
2 Select an option.
Icon Description
Off: The ash will not re. The camera will display the shake warning when
you are shooting in low light.
Auto: The camera will select a proper ash setting for the scene it detects in Smart Auto mode.
Auto: The ash will re automatically when the subject or background is dark.
Preventing red-eye If the ash res when you capture a photo of a person in the dark, a red glow may appear in the persons eyes. To prevent this, select Red-eye or Red-eye Fix. Refer to ash options in Using the ash.
Before correction After correction
Shooting options 65
Shooting in the dark
Flash options are not available if you set burst options or select Blink Detection.
Make sure that your subjects are within the recommended distance from the ash. (p. 150)
If light from the ash is reected or there is a substantial amount of dust in the air, tiny spots may appear in your photo.
In some modes, you can also set the ash option by pressing [m], and then selecting Flash.
Icon Description
Red-eye: The ash will re twice when the subject or
background is dark to reduce the red-eye effect. There is an interval between the 2 bursts of the ash.
Do not move until the ash res a second time.
Fill in: The ash always res. The camera automatically adjusts light intensity.
Slow Sync: The ash res and the shutter stays open longer. This option is recommended when you want to
capture more ambient light to reveal more details in the background.
Use a tripod to prevent your photos from blurring. The camera will display the shake warning when
you are shooting in low light.
Red-eye Fix: The ash res twice when the subject or background
is dark. The camera corrects red-eyes through its advanced software analysis.
There is an interval between the 2 bursts of the ash. Do not move until the ash res a second time.
Available options may differ depending on the shooting conditions.
Shooting options 66
Shooting in the dark
Adjusting the ISO sensitivity The ISO sensitivity is the measure of a lms sensitivity to light as dened by the International Organization for Standardization (ISO). The higher ISO sensitivity you select, the more sensitive to light your camera becomes. Use a higher ISO sensitivity to capture better photos and reduce camera shake when not using the ash.
1 In Shooting mode, press [m].
2 Select ISO.
3 Select an option. Select to use an appropriate ISO sensitivity based on the
brightness of the subject and lighting.
Higher ISO sensitivities may result in more image noise.
Shooting options 67
Changing the cameras focus Learn how to adjust the cameras focus to suit the subject and the shooting conditions.
1 In Shooting mode, press [c].
Back Select
Focus
Normal (AF)
Macro
2 Select an option.
Icon Description
Normal (AF): Focus on a subject farther than 32 in. (80 cm) away. Farther than 98 in. (250 cm) away when you use the zoom.
Macro: Focus on a subject that is 232 in. (580 cm) from the camera. 3998 in. (100250 cm) when you use the zoom.
Auto Macro: Focus on a subject farther than 2 in. (5 cm) away.
Farther than 39 in. (100 cm) away when you use the zoom.
It is set automatically in some shooting modes.
Available options may differ depending on the shooting conditions.
In some modes, you can also set the focus option by pressing [m], and then selecting Focus.
Using macro Use macro to capture close-up photos of subjects, such as owers or insects.
Try to hold the camera rmly to prevent blurry photos. Turn off the ash if the distance to the subject is less than
15.7 in. (40 cm).
Shooting options 68
Changing the cameras focus
If you do not select a focus area, the focus frame will appear in the center of the screen.
Tracking a subject may fail when: - the subject is too small - the subject moves excessively - the subject is backlit or you are shooting in a dark place - colors or patterns on the subject and the background are the same - the subject includes horizontal patterns, such as blinds - the camera shakes excessively
When tracking a subject fails, the focus frame will appear as a white single-line frame ( ).
If the camera fails to track the subject, you must reselect the subject to track.
If the camera fails to focus, the focus frame will change to a red single-line frame ( ).
If you use this function, you cannot set Face Detection options, Timer options, Burst options, and Intelli zoom.
Using tracking auto focus Tracking AF allows you to track and auto focus on your subject, even when you are moving.
1 In Shooting mode, press [m].
2 Select Focus Area Tracking AF.
3 Focus on the subject you want to track, and then press [o]. A focus frame appears on the subject and follows the subject
as you move the camera.
The white frame means that your camera is tracking the subject.
When you half-press [Shutter], the green frame means that your subject is in focus.
4 Press [Shutter] to capture the photo.
Shooting options 69
Changing the cameras focus
Adjusting the focus area You can get clearer photos by selecting an appropriate focus area according to your subject's location in the scene.
1 In Shooting mode, press [m].
2 Select Focus Area.
3 Select an option.
Icon Description
Center AF: Focus on the center of the frame (suitable when subjects are located at or near the center).
Multi AF: Focus on one or more of 9 possible areas.
Tracking AF: Focus on and track the subject. (p. 68)
Available shooting options may differ depending on the shooting conditions.
Shooting options 70
Using Face Detection If you use Face Detection options, your camera can automatically detect a human face. When you focus on a human face, the camera adjusts the exposure automatically. Use Blink Detection to detect closed eyes or Smile Shot to capture a smiling face. You can also use Smart Face Recognition to register faces and prioritize the focus on them.
Detecting faces Your camera automatically detects up to 10 human faces in one scene.
1 In Shooting mode, press [m].
2 Select Face Detection Normal.
The face nearest the camera or nearest the center of the scene appears in a white focus frame and the rest of the faces appear in gray focus frames.
The closer you are to the subjects, the quicker your camera will detect faces.
When your camera detects a face, it tracks the detected face automatically.
Face Detection may not be effective when: - the subject is far from the camera (The focus frame will appear
orange for Smile Shot and Blink Detection.) - it is too bright or too dark - the subject is not facing the camera - the subject is wearing sunglasses or a mask - the subjects facial expression changes drastically - the subject is backlit or the lighting conditions are unstable
Face Detection is not available when you set the Tracking AF. Depending on the shooting options you selected, available Face
Detection options may differ. Depending on the Face Detection options you selected, the timer
function may not be available. When you set Face Detection options, the AF area is automatically
set to Multi AF. Depending on the Face Detection options you selected, Burst options
may not be available. When you set Smart Face Recognition option and capture photos of
detected faces, they will be registered in the face list. You can view registered faces in order of priority in Playback mode.
(p. 86) Even though faces are registered successfully, they may not be classied in Playback mode.
A face detected with Smart Face Recognition option may not appear in the face list or Smart Album.
Shooting options 71
Using Face Detection
Capturing a smile shot The camera automatically releases the shutter when it detects a smiling face.
1 In Shooting mode, press [m].
2 Select Face Detection Smile Shot.
3 Compose your shot. The camera automatically releases the shutter when it detects
a smiling face.
When your subject smiles broadly, your camera can detect the smile more easily.
Detecting eye blinking If your camera detects closed eyes, it will automatically capture 2 photos in succession.
1 In Shooting mode, press [m].
2 Select Face Detection Blink Detection.
Shooting options 72
Using Face Detection
The camera may recognize and register faces incorrectly depending on lighting conditions, drastic changes in the subject's pose or face, and whether or not the subject is wearing glasses.
The camera can automatically register up to 12 faces. If the camera recognizes a new face when 12 faces have already been registered, it will replace the lowest priority face with the new one.
Using Smart Face Recognition The camera automatically registers faces that you frequently photograph. The Smart Face Recognition feature will automatically prioritize the focus on those faces and on favorite faces. The Smart Face Recognition feature is available only when you use a memory card.
1 In Shooting mode, press [m].
2 Select Face Detection Smart Face Recognition.
: Faces that you have registered as favorites. (To register faces as favorites, refer to page 73.)
: Faces that the camera has automatically registered.
Shooting options 73
Using Face Detection
4 When you are nished capturing the photos, the face list appears. Your favorite faces are indicated with a on the face list.
You can register up to 8 favorite faces. The ash will not re when you register a favorite face. If you register the same face twice, you can delete one of the faces
in the face list.
Viewing your favorite faces
1 In Shooting mode, press [m].
2 Select Smart FR Edit Face List.
To change the ranking of your favorite faces, press [o], and then select Edit Ranking. (p. 85)
To delete a favorite face, press [o], and then select Cancel My Star. (p. 86)
Registering faces as your favorites (My Star) You can register your favorite faces to prioritize the focus and exposure on those faces. This feature is available only when you use a memory card.
1 In Shooting mode, press [m].
2 Select Smart FR Edit My Star.
3 Align your subjects face with the oval guideline, and then press [Shutter] to register the face.
SetCancel
Capture photos of one person at a time when registering faces. Capture 5 photos of the subjects face for best results: one each
from the front, left, right, above, and below. When capturing photos from the left, right, above, and below,
instruct the subject not to turn his or her face more than 30 degrees.
You can register a face even if you capture only one photo of the subject's face.
Shooting options 74
Adjusting brightness and color Learn how to adjust the brightness and color for better image quality.
3 Select a value to adjust the exposure. The photo will be brighter as the exposure value increases.
Cancel Set
EV : +1
4 Press [o] to save your settings.
Once you adjust the exposure, the setting will be stored automatically. You may need to change the exposure value later to avoid overexposure or underexposure.
If you cannot decide on an appropriate exposure, select the AEB (Auto Exposure Bracket) option. The camera will capture 3 consecutive photos, each with a different exposure: normal, underexposed, and overexposed. (p. 78)
Adjusting the exposure manually (EV) Depending on the intensity of the ambient light, your photos may be too bright or dark. In these cases, you can adjust the exposure to get a better photo.
Darker (-) Neutral (0) Brighter (+)
1 In Shooting mode, press [m].
2 Select EV.
Shooting options 75
Adjusting brightness and color
Changing the metering option The metering mode refers to the way in which a camera measures the quantity of light. The brightness and lighting of your photos will vary depending on the metering mode you select.
1 In Shooting mode, press [m].
2 Select Metering.
3 Select an option.
Icon Description
Multi: Your camera divides the frame into several areas,
and then measures the light intensity of each area. Suitable for general photos.
Spot: Your camera measures only the light intensity at the
very center of the frame. If a subject is not in the center of the frame, your
photo may be improperly exposed. Suitable for a subject with backlighting.
Center-weighted: Your camera averages the meter reading of the entire
frame with emphasis placed on the center. Suitable for photos with subjects in the center of the
frame.
Compensating for backlighting (ACB) When the light source is behind your subject or there is high contrast between your subject and the background, your subject is likely to appear dark in the photo. In this case, set the Auto Contrast Balance (ACB) option.
Without ACB With ACB
1 In Shooting mode, press [m].
2 Select ACB.
3 Select an option.
Icon Description
Off: ACB (Auto Contrast Balance) is deactivated.
On: ACB (Auto Contrast Balance) is activated.
The ACB feature is always on in Smart Auto mode. The ACB feature is not available when you set Burst options.
Shooting options 76
Adjusting brightness and color
Selecting a White Balance setting The color of your photo depends on the type and quality of the light source. If you want the color of your photo to be realistic, select a White Balance setting that is appropriate for the lighting conditions, such as Auto WB, Daylight, Cloudy, or Tungsten.
Auto WB Daylight
Cloudy Tungsten
1 In Shooting mode, press [m].
2 Select White Balance.
3 Select an option.
Icon Description
Auto WB: Automatically set the White Balance based on the lighting conditions.
Daylight: For outdoor photos on a sunny day.
Cloudy: For outdoor photos on a cloudy day or in shadows.
Fluorescent_H: For shooting under a daylight uorescent or 3-way uorescent light.
Fluorescent_L: For shooting under white uorescent light.
Tungsten: For shooting indoor photos under incandescent bulbs or halogen lamps.
Custom Set: To use White Balance settings that you dene. (p. 77)
Shooting options 77
Adjusting brightness and color
Dening your own White Balance You can customize the White Balance by capturing a photo of a white surface, such as a piece of paper, under the lighting conditions in which you intend to capture a photo. The White Balance feature will help you to match the colors in your photo with the actual scene.
1 In Shooting mode, press [m].
2 Select White Balance Custom Set.
3 Aim the lens at a piece of white paper, and then press [Shutter].
Shooting options 78
Using burst modes It can be difcult to capture photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos. Also, it can be difcult to adjust the exposure correctly and select a proper light source. In these cases, select one of the burst modes.
Icon Description
Motion Capture: While you are pressing [Shutter], the camera captures photos (5 photos per second; maximum of 30 photos).
AEB: Capture 3 consecutive photos, each with a different
exposure: normal, underexposed, and overexposed. Use a tripod to prevent blurry photos.
You can use the ash and timer only when you select Single. When you select Motion Capture, your camera will set the resolution
to and set the ISO sensitivity to Auto. Depending on the Face Detection option you selected, some Burst
options may not be available.
1 In Shooting mode, press [m].
2 Select Drive.
3 Select an option.
Icon Description
Single: Capture a single photo.
Continuous: While you are pressing [Shutter], the camera
continuously captures photos. The maximum number of photos depends on the
capacity of your memory card.
Shooting options 79
Adjusting images Adjust the sharpness, contrast, or saturation of your photos.
4 Press [F/t] to adjust each value.
Sharpness Description
- Soften the edges on your photos (suitable for editing the photos on your computer).
+ Sharpen the edges to improve the clarity of your photos. This may also increase the noise in your photos.
Contrast Description
- Decrease the color and brightness.
+ Increase the color and brightness.
Saturation Description
- Decrease the saturation.
+ Increase the saturation.
5 Press [o] to save your settings.
Select 0 if you do not want to apply any effects (suitable for printing).
1 In Shooting mode, press [m].
2 Select Image Adjust.
3 Select an option. Sharpness Contrast Saturation
Image Adjust
Sharpness
Contrast
Saturation
Cancel Set
Shooting options 80
1 In Video Shooting mode, press [m].
2 Select Voice.
3 Select an option.
Icon Description
Sound Alive On: Turn on the Sound Alive function to reduce the zoom noise.
Sound Alive Off: Turn off the Sound Alive function. The camera can record the zoom noise.
Mute: Do not record sounds.
Do not block the microphone when you use the Sound Alive function.
Recordings made with Sound Alive may differ from actual sounds.
In Picture-in-Picture mode, you cannot set the Sound Alive options.
Reducing the sound of the zoom When you use the zoom while recording videos, the camera can record the sound of the zoom. Use the Sound Alive function to reduce the zoom noise.
Shooting options 81
Available shooting options by shooting mode For details about shooting options, refer to "Shooting options".
Smart Auto
Program Smart Movie
Movie Scene Live
Panorama Picture in Picture
Self Shot Children Jump Shot
Beauty Shot
Resolution O O O O O O O O O
Quality O O O O - O O O O
Timer O O - - O
Flash O - - - O -
ISO sensitivity - O - - - - - - - - -
Macro O O - - - -
Focus area - O - - - - - - - -
Face detection O - - - - -
EV - O - O - - - - - - -
ACB O - - - - - - - - -
Metering - O - O - - - - - - -
White balance - O - O - - - - - - -
Drive - O - - - - - - - -
Image adjust - O - - - - - - - -
Sound Alive - - O O - - - - - - -
Digital zoom - O - - - - - - - -
Intelli zoom - - - - - - - -
OIS O O O O O - O O O O O
: In these modes, some options are limited or a certain option is set by default. O: The option is available in this mode.
Shooting options 82
Available shooting options by shooting mode
Intelligent Portrait
Night Shot Close-up
Shot Magic Frame
Funny Face
Photo Filter
Movie Filter
Split Shot Artistic Brush
Motion Photo
Resolution O O O O
Quality O O O O O O O O
Timer O O O O
Flash - - -
ISO sensitivity - - - - - - - - - -
Macro - - - - - -
Focus Area - - - - - - - - - -
Face detection - - - - - - - -
EV - - - - - - - - - -
ACB - - - - - - - - - -
Metering - - - - - - - - - -
White balance - - - - - - - - - -
Drive - - - - - - - - - -
Image adjust - - - - - - -
Sound Alive - - - - - - - - -
Digital zoom - - - - - - - - - -
Intelli zoom - - - - - - - - - -
OIS O O O - O O O O O O
: In these modes, some options are limited or a certain option is set by default. O: The option is available in this mode.
Viewing photos or videos in Playback mode 84
Starting Playback mode 84 Viewing photos 89 Playing a video 92
Editing a photo 94 Resizing photos 94 Cropping portraits automatically 94 Rotating a photo 95 Applying Smart Filter effects 95 Adjusting your photos 96 Creating a print order (DPOF) 98
Viewing les on a TV 99
Transferring les to your Windows computer 100
Transferring les with Intelli-studio 101 Transferring les by connecting the camera as a removable disk 103 Disconnecting the camera (for Windows XP) 104
Transferring les to your Mac computer 105
Printing photos with a PictBridge photo printer 106
Playback/Editing Learn how to play back photos or videos, and edit photos or videos. Also, learn how to connect your camera to your computer, photo printer, or TV.
Playback/Editing 84
Viewing photos or videos in Playback mode Learn how to play back photos or videos and how to manage les.
Photo le information
File Information
Memory in use
Album/Zoom In
Icon Description
Current le/Total les
Folder nameFile name
GIF le
Protected le
Print order has been set (DPOF)
To display le information on the screen, press [D].
Starting Playback mode View photos or play videos stored in your camera.
1 Press [P]. The most recent le will be displayed. If the camera is off, it will turn on and display the most recent
le.
2 Press [F/t] to scroll through les. Press and hold [F/t] to scroll through les quickly.
If you want to view les stored in the internal memory, remove your memory card.
You may not be able to edit or play back les that were captured with other cameras, due to unsupported sizes (image size, etc) or codecs. Use a computer or another device to edit or play back these les.
Playback/Editing 85
Viewing photos or videos in Playback mode
Ranking your favorite faces You can rank your favorite faces. The favorite face feature is available only when you insert a memory card into the camera.
1 In Playback mode, press [m].
2 Select Face List.
EditBack
Face List
3 Press [o].
4 Select Edit Ranking.
5 Select a face, and then press [o].
6 Press [F/t] to change the ranking of the face, and then press [m].
Video le information
Play Capture
File Information Album
Icon Description
Current le/Total les
Folder name-File name
Current playback time
Video length
Protected le
To display le information on the screen, press [D].
Playback/Editing 86
Viewing photos or videos in Playback mode
Viewing les by category in Smart Album View les by category, such as date, face, or le type.
1 In Playback mode, rotate [Zoom] to the left. You can also access Smart Album by scrolling to
on the Home screen, and then selecting .
2 Press [m].
3 Select Filter a category.
All
Date
Face List
File Type
Back Select
Filter
Icon Description
All: View les normally.
Date: View les by the date they were saved.
Face List: View les by recognized faces and favorite faces. (Up to 20 people)
File Type: View les by the le type.
Deleting favorite faces You can delete your favorite faces. The favorite face feature is available only when you insert a memory card into the camera.
1 In Playback mode, press [m].
2 Select Face List.
3 Press [o].
4 Select Cancel My Star.
5 Select a face, and then press [o].
6 Press [f].
7 When the pop-up message appears, select Yes.
Playback/Editing 87
Viewing photos or videos in Playback mode
Viewing les as thumbnails Scan thumbnails of les.
In Playback mode, rotate [Zoom] to the left to view thumbnails (12 at a time). Rotate [Zoom] to the left once more to display more thumbnails (24 at a time). Rotate [Zoom] to the right to return to the previous view.
Menu
You can also view les as thumbnails by scrolling to
Press [D/c/F/t] to scroll through les.
4 Scroll to a desired list, and then press [o] to open the list.
5 Scroll to a desired le, and then press [o] to view the le.
6 Rotate [Zoom] to the left to return to the previous view.
It may take some time for the camera to open Smart Album, change the category, or reorganize les.
Playback/Editing 88
Viewing photos or videos in Playback mode
Protecting les Protect your les from accidental deletion.
1 In Playback mode, press [m].
2 Select Protect On.
You cannot delete or rotate a protected le.
Deleting les Select les to delete in Playback mode.
Deleting a single le You can select one le, and then delete it.
1 In Playback mode, select a le, and then press [f].
2 When the pop-up message appears, select Yes.
You can also delete les in Playback mode by pressing [m], and then selecting Delete Delete Yes.
Deleting multiple les You can select multiple les, and then delete them at once.
1 In Playback mode, press [f]. When in thumbnails view, press [m], select
Delete Select, and then skip to step 3, or press [f], select Select, and then skip to step 3.
2 When the pop-up message appears, select Multiple Delete.
3 Scroll to each le you want to delete, and then press [o]. Press [o] again to cancel your selection.
4 Press [f].
5 When the pop-up message appears, select Yes.
Playback/Editing 89
Viewing photos or videos in Playback mode
Viewing photos Enlarge part of a photo or view photos as a slide show.
Enlarging a photo
In Playback mode, rotate [Zoom] to the right to enlarge a portion of the photo. Rotate [Zoom] to the left to zoom out.
Enlarged area
Crop
Deleting all les You can select all les, and then delete them at once.
1 In Playback mode, press [m]. When in thumbnails view, press [m], select
Delete Delete All, and then skip to step 3, or press [f], select Delete All, and then skip to step 3.
2 Select Delete Delete All.
3 When the pop-up message appears, select Yes. All unprotected les are deleted.
Copying les to a memory card Copy les from the internal memory to a memory card.
1 In Playback mode, press [m].
2 Select Copy to Card.
Playback/Editing 90
Viewing photos or videos in Playback mode
Viewing panoramic photos View photos captured in Live Panorama mode.
1 In Playback mode, press [F/t] to scroll to a desired panoramic photo. The entire panoramic photo appears on the screen.
2 Press [o]. The camera automatically scrolls through the photo from left to
right for a horizontal panoramic photo and from top to bottom for a vertical panoramic photo. The camera then switches to Playback mode.
While playing back a panoramic photo, press [o] to pause or resume.
After you have paused the playback of a panoramic photo, press [D/c/F/t] to move the photo horizontally or vertically, depending on the direction you moved when capturing the photo.
3 Press [m] to return to Playback mode.
The camera automatically scrolls through the panoramic photo only if the longest side of the photo is two or more times longer than the shortest side.
To Description
Move the enlarged area Press [D/c/F/t].
Trim the enlarged photo
Press [o], and then select Yes. (The trimmed photo will be saved as a new le. The original photo is retained in its original form.)
When you view photos that were captured by another camera, the zoom ratio may differ.
Playback/Editing 91
Viewing photos or videos in Playback mode
Playing a slide show Apply effects and audio to a slide show of your photos. The slide show function does not work for videos and GIF les.
1 In Playback mode, press [m].
2 Select Slide Show Options.
3 Select a slide show effect option. Skip to step 4 to start a slide show with no effects.
* Default
Option Description
Play Mode Set whether or not to repeat the slide show. (One Play*, Repeat)
Interval
Set the interval between photos. (1 sec*, 3 sec, 5 sec, 10 sec)
You must set the Effect option to Off to set the interval.
Music Set background audio.
Effect
Set a scene change effect between photos. (Off, Calm*, Shine, Relax, Lively, Sweet)
Select Off to cancel effects. When you use the Effect option, the interval
between photos will be set to 1 second.
Viewing animated photos View animated GIF les repeatedly that were captured in Motion Photo mode or Jump Shot mode.
1 In Playback mode, press [F/t] to scroll to a desired GIF le.
2 Press [o]. The GIF le plays back repeatedly.
3 Press [o] to return to Playback mode.
Playback/Editing 92
Viewing photos or videos in Playback mode
4 Press [m].
5 Select Start Slide Show.
6 View the slide show. Press [o] to pause the slide show. Press [o] again to resume the slide show.
Press [o], and then press [F/t] to stop the slide show and return to Playback mode.
Rotate [Zoom] to the left or right to adjust the volume level.
Playing a video In Playback mode, you can view a video, and then capture or trim parts of the playing video. You can save the captured or trimmed segments as new les.
1 In Playback mode, select a video, and then press [o].
2 View the video.
Current playback time/ Video length
Pause Stop
To Description
Scan backward Press [F]. Each time you press [F], you change the scan speed in this order: 2X, 4X, 8X.
Pause or resume playback
Press [o].
Scan forward Press [t]. Each time you press [t], you change the scan speed in this order: 2X, 4X, 8X.
Adjust the volume level Rotate [Zoom] to the left or right.
Playback/Editing 93
Viewing photos or videos in Playback mode
Capturing an image from video
1 While viewing a video, press [o] at the point where you want to capture an image.
2 Press [c].
The resolution of the captured image will be the same as the original video.
The captured image is saved as a new le.
Trimming a video
1 In Playback mode, select a video, and then press [m].
2 Select Trim Movie.
3 Press [o] to start playing the video.
4 Press [o] [c] at the point where you want the trimming to begin.
5 Press [o] to resume playing the video.
6 Press [o] [c] at the point where you want the trimming to end.
7 Press [c] to trim.
8 When the pop-up message appears, select Yes.
The original video should be at least 10 seconds long. The camera will save the edited video as a new le and leave the
original video intact.
Playback/Editing 94
Editing a photo Learn how to edit photos.
The camera will save edited photos as new les. When you edit photos, the camera will automatically convert them to a lower resolution. Photos that you rotate or resize manually are not automatically converted to
a lower resolution.
Cropping portraits automatically Extract and save close-up portraits from landscape shots.
1 In Playback mode, select a photo, and then press [m].
2 Select Intelligent Portrait. The camera detects the face of a subject, crops the photo
around the face, and then saves 2 cropped photos under consecutive le names.
The Intelligent Portrait feature will not function if: - no face is detected - more than 2 faces are detected - the detected facial area is larger than a certain ratio
Resizing photos Change the size of a photo and save it as a new le.
1 In Playback mode, select a photo, and then press [m].
2 Select Resize.
3 Select an option.
Back Select
2592 X 1944
1984 X 1488
1024 X 768
Resize
Available resize options differ depending on the original size of the photo.
Playback/Editing 95
Editing a photo
Rotating a photo
1 On the Home screen, scroll to
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select Rotate an option.
5 Press [c] to save.
Cancel Save
Rotate : Right 90
The camera will overwrite the original le. In Playback mode, press [m], and then select Rotate to rotate
a photo.
Applying Smart Filter effects Apply special effects to your photos.
1 On the Home screen, scroll to
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select Smart Filter an option.
Back Set
Smart Filter : Miniature
Option Description
Normal No effect
Miniature Apply a tilt-shift effect to make the subject appear in miniature.
Vignetting Apply the retro-looking colors, high contrast, and strong vignette effect of Lomo cameras.
Playback/Editing 96
Editing a photo
Adjusting your photos Learn how to adjust the brightness, contrast, or saturation or how to correct the red-eye effect. If the center of a photo is dark, you can adjust it to be brighter. The camera will save an edited photo as a new le, but may convert it to a lower resolution.
You can adjust brightness, contrast, and saturation and apply Smart Filter effects at the same time.
You cannot apply the ACB, Face Retouch, and Red-eye Fix effects at the same time.
Adjusting brightness, contrast, or saturation
1 On the Home screen, scroll to
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select an adjusting option.
Icon Description
Brightness
Contrast
Saturation
Option Description
Ink Painting Apply a watercolor painting effect.
Oil Painting Apply an oil painting effect.
Cartoon Apply a cartoon painting effect.
Cross Filter Add lines that radiate outward from bright objects to imitate the visual effect of a cross lter.
Sketch Apply a pen sketch effect.
Soft Focus Hide facial imperfections or apply dreamy effects.
Fish-eye Distort close objects to imitate the visual effect of a sheye lens.
Old Film Apply a vintage lm effect.
Half Tone Dot Apply a halftone effect.
Classic Apply a black and white effect.
Retro Apply a sepia tone effect.
Zooming Shot Blur the edges of a photo to emphasize the subjects in the center.
5 Press [c] to save.
Playback/Editing 97
Editing a photo
5 Press [F/t] to adjust the option.
6 Press [o].
7 Press [c] to save.
Adjusting dark subjects (ACB)
1 On the Home screen, scroll to
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select ACB.
5 Press [c] to save.
Retouching faces
1 On the Home screen, scroll to
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select Face Retouch.
5 Press [F/t] to adjust the option. As the number increases, the skin tone becomes brighter and
smoother.
6 Press [c] to save.
Removing red-eye
1 On the Home screen, scroll to
2 Select .
3 Rotate [Zoom] to the left, and then select a photo.
4 Select Red-eye Fix.
5 Press [c] to save.
Playback/Editing 98
Editing a photo
Creating a print order (DPOF) Select photos to print and save print options in the Digital Print Order Format (DPOF). This information is saved in the MISC folder on your memory card for convenient printing on DPOF- compatible printers.
1 In Playback mode, select a photo you want to print, and then press [m].
2 Select DPOF.
3 Press [D/c] to select the number of copies, and then press [o].
You can take the memory card to a print shop that supports DPOF (Digital Print Order Format) or you can print photos directly through a DPOF-compatible printer at home.
Photos with dimensions that are wider than the paper may be cut off on the left and right edges. Ensure that your photo dimensions are compatible with the paper you select.
You cannot set DPOF options for photos stored in the internal memory.
If you specify the print size, you can print photos only with DPOF 1.1-compatible printers.
Playback/Editing 99
Viewing les on a TV Play back photos or videos by connecting your camera to a TV with the A/V cable.
7 Turn on your TV, and then select the A/V video source with the TV remote control.
8 Turn on your camera. The camera automatically enters into Playback mode when
you connect it to a TV.
9 View photos or play videos using the camera buttons.
Depending on the TV model, you may see some digital noise or part of an image may not appear.
Images may not be centered on the TV screen depending on your TV settings.
1 On the Home screen, scroll to
2 Select .
3 Select Connectivity Video Out.
4 Select the video signal output for your country or region. (p. 131)
5 Turn off your camera and TV.
6 Connect your camera to your TV with the A/V cable.
VideoAudio
Playback/Editing 100
Transferring les to your Windows computer Transfer les to your Windows computer, edit them with Intelli-studio, and upload them to the web.
The requirements are recommendation only. Intelli-studio may not work properly even when the computer meets the requirements, depending on the condition of your computer.
If your computer does not meet the requirements, videos may not play correctly or it may take longer to edit videos.
Install DirectX 9.0c or later before you use Intelli-studio. Your computer must be running Windows XP, Windows Vista, or
Windows 7 for you to connect the camera as a removable disk.
The manufacturer is not responsible for any damage that results from using unqualied computers such as a computer you assembled yourself.
Requirements
Item Requirements
CPU Intel Pentium4 3.2 GHz or higher/ AMD Athlon FX 2.6 GHz or higher
RAM Minimum 512 MB RAM (1 GB or more recommended)
OS* Windows XP SP2, Windows Vista, or Windows 7
Hard disk capacity
250 MB or more (1 GB and above recommended)
Others
CD-ROM drive 1024 X 768 pixels, 16-bit color display compatible
monitor (1280 X 1024 pixels, 32-bit color display recommended)
USB 2.0 port nVIDIA Geforce 7600GT or higher/
ATI X1600 series or higher Microsoft DirectX 9.0c or higher
* A 32-bit version of Intelli-studio will be installedeven on 64-bit editions of Windows XP, Windows Vista, and Windows 7.
Playback/Editing 101
Transferring les to your Windows computer
6 Turn on the camera. When the Intelli-studio installation pop-up appears on the
computer screen, follow the on-screen instructions to complete the installation.
Once the Intelli-studio is installed on your computer, the computer recognizes the camera and launches the Intelli-studio automatically.
If you set the USB option to Select Mode, select Computer in the pop-up window.
7 Select a destination folder on your computer, and then select Yes. New les stored on the camera will automatically transfer to
the selected folder. If your camera has no new les, the pop-up window for saving
new les will not appear.
For Windows Vista and Windows 7, select Run iLinker.exe from the Auto Play window to start Intelli-studio. If Run iLinker.exe does not appear on the computer, click Computer Intelli-studio, and then follow the on-screen instructions to complete the Intelli-studio installation.
Transferring les with Intelli-studio You can download Intelli-studio from the linked webpage and install it on your computer. When you connect the camera to a computer with Intelli-studio installed, the program will launch automatically.
The battery will charge while the camera is connected to a computer with the USB cable.
1 On the Home screen, scroll to
2 Select .
3 Select Connectivity PC Software On.
4 Turn off the camera.
5 Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data.
Playback/Editing 102
Transferring les to your Windows computer
Using Intelli-studio Intelli-studio allows you to play back and edit les. For details, select Help Help from the program toolbar.
You can update the rmware of your camera by selecting Web Support Upgrade rmware for the connected device from the program toolbar. You can download short animations for use in Children mode. You cannot edit les directly on the camera. Transfer les to a folder on your computer before editing. Intelli-studio supports the following formats:
- Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9), AVI (MJPEG) - Photos: JPG, GIF, BMP, PNG, TIFF
1 2 3 4 5 6
7
8
9
0
!
@
#
$
:
^
Playback/Editing 103
Transferring les to your Windows computer
No. Description
1 Open menus.
2 Display les in the selected folder.
3 Switch to the Photo edit mode.
4 Switch to the Video edit mode.
5 Switch to the Sharing mode (to send les by email or upload les to websites, such as Flickr or YouTube).
6 Download short animations for use in Children mode.
7 Enlarge or reduce the thumbnails in the list.
8 Select a le type.
9 View les in the selected folder on your computer.
0 Show or hide les on the connected camera.
! View les in the selected folder on the camera.
@ View les as thumbnails or on a map.
# Browse folders stored on the camera.
$ Browse folders stored on your computer.
: Move to the previous or next folder.
^ Print les, view les on a map, store les in My Folder, or register faces.
Transferring les by connecting the camera as a removable disk Connect the camera to your computer as a removable disk.
1 On the Home screen, scroll to
2 Select .
3 Select Connectivity PC Software Off.
4 Turn off the camera.
5 Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data.
Playback/Editing 104
Transferring les to your Windows computer
Disconnecting the camera (for Windows XP) With Windows Vista and Windows 7, the methods for disconnecting the camera are similar.
1 Verify that the status lamp is not blinking. The status lamp blinks when transferring les. Wait until it
stops.
2 Click on the tool bar at the bottom right of your computer screen.
3 Click the pop-up message.
4 Click the message box that indicates the camera can be removed safely.
5 Remove the USB cable.
The camera may not disconnect safely while Intelli-studio is running. End the program before disconnecting the camera.
6 Turn on the camera. The computer recognizes the camera automatically.
If you set the USB option to Select Mode, select Computer in the pop-up window.
7 On your computer, select My Computer Removable Disk DCIM 100PHOTO.
8 Drag or save les to your computer.
Playback/Editing 105
Transferring les to your Mac computer When you connect the camera to a Macintosh computer, the computer will automatically recognize the device. You can transfer les directly from the camera to the computer without installing any programs.
Mac OS 10.4 or later is supported.
2 Turn on the camera. The computer recognizes the camera automatically and
displays a removable disk icon.
If you set the USB option to Select Mode, select Computer in the pop-up window.
3 Double-click the removable disk icon.
4 Drag or save les to your computer.
1 Connect your camera to a Macintosh computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is reversed, it may damage your les. The manufacturer is not responsible for any loss of data.
Playback/Editing 106
Printing photos with a PictBridge photo printer Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.
Conguring print settings
Press [m] to congure print settings.
Size
Layout
Type
Quality
Date Print
Exit Select
Option Description
Print Select whether to print the current photo or all photos.
Size Set the print size.
Layout Set the number of photos to be printed on a single sheet of paper.
Type Set the type of paper.
Quality Set the print quality.
Date Print Set to print the date.
File Name Set to print the le name.
Reset Reset settings to their default values.
Some options may not be supported by some printers.
1 On the Home screen, scroll to
2 Select .
3 Select Connectivity USB Printer.
4 Turn on the printer, and then connect your camera to the printer with the USB cable.
5 If the camera is off, press [POWER] or [P] to turn it on. The printer recognizes the camera automatically.
6 Press [F/t] to select a le to print. Press [m] to set printing options.
See Conguring print settings.
7 Press [o] to print. Printing starts. Press [o] to cancel printing.
Connecting to a WLAN and conguring network settings 108
Connecting to a WLAN 108 Using the login browser 109 Network connection tips 110 Entering text 111
Sending photos or videos to a smart phone 112
Using a smart phone as a remote shutter release 113
Using photo or video sharing websites 115
Accessing a website 115 Uploading photos or videos 115
Sending photos or videos via email 117 Changing email settings 117 Sending photos or videos via email 118
Uploading photos to a cloud server 120
Using Auto Backup to send photos or videos 121
Installing the program for Auto Backup on your PC 121 Sending photos or videos to a PC 121
Viewing photos or videos on a TV Link-enabled TV 123
Sending photos using Wi-Fi Direct 125
About the Wake on LAN (WOL) feature 126
Wireless network (DV300F/DV305F only) Learn to connect to wireless local area networks (WLANs) and use functions.
Wireless network (DV300F/DV305F only) 108
Connecting to a WLAN and conguring network settings Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also congure network settings.
Icon Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [t] to open network setting options.
When you select a secured AP, a pop-up window appears. Enter the required passwords to connect to the WLAN. For information about entering text, refer to "Entering text". (p. 111)
When a login page appears, refer to "Using the login browser". (p. 109)
When you select an unsecured AP, the camera will connect to the WLAN.
If you select a WPS prole supported AP, select WPS PIN, and then enter a PIN on the AP device. You can also connect to a WPS prole supported AP by selecting WPS PBC on the camera, and then pushing the WPS button on the AP device.
Connecting to a WLAN
1 On the Home screen, scroll to
2 Select , , , , or .
3 Press [m], and then select Wi-Fi Setting. In some modes, press [m] or follow the on-screen
instructions until the Wi-Fi Setting screen appears. The camera automatically searches for available AP devices.
4 Select an AP.
Wi-Fi Setting
Samsung 2
Samsung 1
Samsung 3
Samsung 4
Samsung 5
Back Select
Select WPS PBC to connect to a WPS AP. Select Refresh to refresh connectable APs. Select Add wireless network to add an AP manually.
Wireless network (DV300F/DV305F only) 109
Connecting to a WLAN and conguring network settings
Using the login browser You can enter your login information via the login browser when connecting to some APs, sharing sites, or cloud servers.
Button Description
[D/c/F/t] Move to an item or scroll the page.
[o] Select an item.
[m]
Access the following options: Previous Page: Move to the previous page. Next Page: Move to the next page. Reload: Reload the page. Stop: Stop loading the page. Exit: Close the login browser.
[f] Close the login browser.
You cannot select some items depending on the page you connected to. This does not indicate a malfunction.
The login browser may not close automatically after you log into some pages. If this occurs, close the login browser by pressing [f], and then proceed with the desired operation.
It may take longer to load the login page due to the page size or network speed. If this occurs, wait until the login information input window appears.
Setting network options
1 In the Wi-Fi Setting screen, move to an AP, and then press [t].
2 Select each option, and then enter the required information.
Option Description
Authentication Select a network authentication type.
Data Encryption Select an encryption type.
Network Password Enter the network password.
IP Setting Set the IP address manually.
Manually setting the IP address
1 In the Wi-Fi Setting screen, move to an AP, and then press [t].
2 Select IP Setting Manual.
3 Select each option, and then enter the required information.
Option Description
IP Enter the static IP address.
Subnet Mask Enter the subnet mask.
Gateway Enter the gateway.
DNS Server Enter the DNS address.
Wireless network (DV300F/DV305F only) 110
Connecting to a WLAN and conguring network settings
If you cannot connect to a WLAN, try another AP from the available AP list.
You can also connect to free WLANs in some foreign countries. A login page may appear when you select free WLANs
provided by some network service providers. Enter your ID and password to connect to the WLAN. For information about registering or the service, contact the network service providers.
Be cautious when you enter personal information for an AP connection. Do not enter any payment or credit card information on your camera. The manufacturer is not liable for any problem caused by entering such information.
Available network connections may differ by country. The WLAN feature of your camera must comply with radio
transmission laws in your region. To ensure compliance, use the WLAN feature only in the country where you purchased the camera.
The process for adjusting network settings may differ, depending on network conditions.
Do not access a network that you are not authorized to use. Before you connect to a network, ensure your battery is fully
charged. When a DHCP server is not available you must make an autoip.
txt le and copy it to the inserted memory card to connect to the network using Auto IP.
Network connection tips The quality of the network connection will be determined by
the AP. The further the distance between your camera and the AP, the
longer it will take to connect to the network. If a nearby device is using the same radio frequency signal as
your camera, it may interrupt your connection. If your AP name is not in English, the camera may not be able
to locate the device or the name may appear incorrectly. For network settings or a password, contact your network
administrator or network service provider. If a WLAN requires authentication from the service provider,
you may not be able to connect to it. To connect the WLAN, contact your network service provider.
Depending on the encryption type, the number of digits in the password may differ.
A WLAN connection may not be possible in all surroundings. The camera may display a WLAN enabled printer on the AP
List. You cannot connect to a network via a printer. You cannot connect your camera to a network and a TV
simultaneously. Also, you cannot view photos or videos on a TV while connected to a network.
Connecting to a network may incur additional charges. Costs will vary based on the conditions of your contract.
Wireless network (DV300F/DV305F only) 111
Connecting to a WLAN and conguring network settings
Entering text Learn how to enter text. The icons in the table below let you move the cursor, change the case, etc. Press [D/c/F/t] to move to a desired key, and then press [o] to enter the key.
Back Backspace
Done
Icon Description
Delete the last letter.
Move the cursor.
In ABC mode, change the case.
Enter ".com".
Icon Description
Switch between Symbol mode and ABC mode.
Enter a space.
Done Save the displayed text.
View the entering text guide.
You can use only the English alphabet, regardless of the display language.
To move to Done directly, press [P]. You can enter up to 64 characters.
Wireless network (DV300F/DV305F only) 112
Sending photos or videos to a smart phone The camera connects to a smart phone that supports the MobileLink feature via a WLAN. You can easily send photos or videos to your smart phone.
The MobileLink feature is supported by Galaxy S smart phones with the Android 2.2 OS or higher. If your smart phone uses the Android 2.1 OS, upgrade your smart phone to Android 2.2 or higher. This feature is also supported by the 7 and 10.1 inch Galaxy Tab. This feature may be supported by other devices with Android 2.2 or higher, but Samsung makes no guarantee of its functionality.
You should install the Samsung MobileLink application on your phone or device before using this feature. You can download the application from Samsung Apps or Android market.
When there are no les in the camera memory, you cannot use this feature. You can view up to 1,000 les and send up to 100 les at a time.
5 On the smart phone, select les to send from the camera to the smart phone.
6 On the smart phone, select Copy. The camera will send the les.
1 On the camera's Home screen, scroll to
2 On the camera, select . If the pop-up message that prompts you to download the
application appears, select OK.
3 On the smart phone, turn on the Samsung MobileLink application. Read the on-screen instructions carefully to select and
connect to your camera. The smart phone can connect to only one camera at a time.
4 On the camera, select OK.
Wireless network (DV300F/DV305F only) 113
Using a smart phone as a remote shutter release The camera connects to a smart phone via a WLAN. Use the smart phone as a remote shutter release with the Remote Viewnder feature. The captured photo will display on the smart phone.
The Remote Viewnder feature is supported by Galaxy S smart phones with the Android 2.2 OS or higher. If your smart phone uses the Android 2.1 OS, upgrade your smart phone to Android 2.2 or higher. This feature is also supported by the 7 and 10.1 inch Galaxy Tab. This feature may be supported by other devices with Android 2.2 or higher, but Samsung makes no guarantee of its functionality.
You should install the Remote Viewnder application on your phone or device before using this feature. You can download the application from Samsung Apps or Android market.
4 On the smart phone, set the following shooting options.
Icon Description
Flash option
Timer option
Photo size
While using this feature, some buttons are not available on your camera.
The zoom button and the shutter button on your smart phone will not function when using this feature.
Remote Viewnder mode supports the and photo sizes only.
1 On the camera's Home screen, scroll to
2 On the camera, select . If the pop-up message that prompts you to download the
application appears, select OK.
3 On the smart phone, turn on the Remote Viewnder application. Read the on-screen instructions carefully to select and
connect to your camera. The smart phone can connect to only one camera at a time.
Wireless network (DV300F/DV305F only) 114
Using a smart phone as a remote shutter release
5 On the smart phone, touch and hold to focus. The focus is automatically set to multi-AF.
6 Release to capture the photo. The photo will be saved in your camera. Touch the photo in the bottom of the screen to save it to the
smart phone. The photo will be resized to 640 X 360.
When you use this feature, the ideal distance between the camera and the smart phone may vary, depending on your surroundings.
The smart phone must be within 23 ft/7 m of the camera to use this feature.
It will take some time to capture the photo after you release on the smart phone.
The Remote Viewnder function will deactivate when: - there is an incoming call on the smart phone - either the camera or the smart phone turn off - the memory is full - either device loses its connection to the WLAN - the Wi-Fi connection is poor or unstable
Wireless network (DV300F/DV305F only) 115
Using photo or video sharing websites Upload your photos or videos to le sharing websites. Available websites will be displayed on your camera.
Uploading photos or videos
1 Access the website with your camera.
2 Scroll to the les you want to upload, and then press [o]. You can select up to 20 les. The total size must be
10 MB or less.
3 Select Upload. If you connected to Facebook, select Upload Upload. If you connected to Facebook, you can enter your comments
by selecting the Comment box. For information about entering text, refer to "Entering text". (p. 111)
Accessing a website
1 On the Home screen, scroll to
2 Select .
3 Select a website. The camera will automatically attempt to connect to a WLAN
via the most recently connected AP device. If the camera has not previously been connected to a WLAN,
it will search for available AP devices. (p. 108)
4 Enter your ID and password, and then select Login. For information about entering text, refer to "Entering text".
(p. 111) To select an ID from the list, select an ID. If you have previously logged in to the website, you may be
logged in automatically.
You must have an existing account on the le sharing website to use this feature.
Wireless network (DV300F/DV305F only) 116
Using photo or video sharing websites
The maximum photo resolution you can upload is 2M, and the longest video you can upload is 30 seconds at resolution or a video recorded using . If the selected photo resolution is higher than 2M, it will be automatically resized to a lower resolution.
The method of uploading photos or videos may differ depending on the selected website.
If you cannot access a website because of rewall or user authentication settings, contact your network administrator or network service provider.
Uploaded photos or videos may be automatically titled with the date they were captured.
The speed of your internet connection may affect how quickly photos upload or web pages open.
When there are no les in the camera memory, you cannot use this feature.
You can also upload photos or videos to le sharing websites in Playback mode by pressing [m], and then selecting Share(Wi-Fi)
a desired website.
Wireless network (DV300F/DV305F only) 117
Sending photos or videos via email You can change settings in the email menu, and send photos or videos stored on the camera via email.
6 Select the Email box, enter your email address, and then select Done.
7 Select OK to save your changes. To delete your information, select Reset.
Setting an email password
1 On the Home screen, scroll to
2 Select .
3 Press [m].
4 Select Setting Password On. To deactivate the password, select Off.
5 When the pop-up appears, press [o]. The pop-up disappears automatically even if you do not
press [o].
6 Enter a 4-digit password.
7 Enter the password again.
8 When the pop-up appears, press [o]. The pop-up disappears automatically even if you do not
press [o].
Changing email settings In the email menu, you can change settings for storing your information. You can also set or change the email password. For information about entering text, refer to "Entering text". (p. 111)
Storing your information
1 On the Home screen, scroll to
2 Select .
3 Press [m].
4 Select Sender Setting.
5 Select the Name box, enter your name, and then select Done.
Name
Back
OK Reset
Sender Setting
Wireless network (DV300F/DV305F only) 118
Sending photos or videos via email
If you lost your password, you can reset it by selecting Reset on the password setting screen. When you reset the information, previously saved users setting information, email address, and recently sent email list will be deleted.
Changing the email password
1 On the Home screen, scroll to
2 Select .
3 Press [m].
4 Select Change Password.
5 Enter your current 4-digit password.
6 Enter a new 4-digit password.
7 Enter the new password again.
8 When the pop-up appears, press [o]. The pop-up disappears automatically even if you do not
press [o].
Sending photos or videos via email You can send photos or videos stored on the camera via email. For information about entering text, refer to "Entering text". (p. 111)
1 On the Home screen, scroll to
2 Select .
3 Select the Name(Email) box, enter your email address, and then select Done. If you have previously saved your information, it will be inserted
automatically. (p. 117) To use an address from the list of previous senders, select
an address.
4 Select the Receiver box, enter an email address, and then select Done. To use an address from the list of previous recipients, select
an address. Select to add additional recipients. You can input up to
30 recipients. Select to delete an address from the list.
5 Select Next.
Wireless network (DV300F/DV305F only) 119
Sending photos or videos via email
Even if a photo appears to have transferred successfully, errors with the recipients email account may cause the photo to be rejected or recognized as spam.
You may not be able to send an email if no network connection is available or if your email account settings are incorrect.
The maximum photo resolution you can send is 2M and the longest video you can upload is 30 seconds at resolution or a video recorded using . If the selected photo resolution is higher than 2M, it will be automatically resized to a lower resolution.
If you cannot send an email because of rewall or user authentication settings, contact your network administrator or network service provider.
When there are no les in the camera memory, you cannot use this feature.
You can also send an email in Playback mode by pressing [m], and then selecting Share(Wi-Fi) Email.
6 Scroll to les to send, and then press [o]. You can select up to 20 les. The total size must be
10 MB or less.
7 Select Next.
8 Select the Comment box, enter your comments, and then select Done.
9 Select Send. The camera will automatically attempt to connect to a WLAN
via the most recently connected AP device and send the email.
If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 108)
Wireless network (DV300F/DV305F only) 120
Uploading photos to a cloud server You can upload your photos to SkyDrive. To upload photos, you must visit the Microsoft website and register before connecting your camera.
4 Login with your ID and password. For information about entering text, refer to
"Entering text". (p. 111) If you connected to SkyDrive, refer to
"Using the login browser". (p. 109)
5 Scroll to the photos you want to upload, and then press [o].
6 Select Upload.
You can also upload photos to a cloud server in Playback mode by pressing [m], and then selecting Share(Wi-Fi) a cloud server.
When there are no photos in the camera memory, you cannot use this feature.
When you upload photos to SkyDrive, they will be resized to 2M while maintaining its aspect ratio.
1 On the camera's Home screen, scroll to
2 Select . You can change the uploading photo size by pressing
[m], and then selecting Upload Image Size.
3 Select SkyDrive. If the pop-up message that prompts you to create an account
appears, select OK. The camera will attempt to connect to a WLAN via the most
recently connected AP. If the camera has not previously been connected to a WLAN,
it will search for available AP devices. (p. 108)
Wireless network (DV300F/DV305F only) 121
Using Auto Backup to send photos or videos You can send photos or videos that you captured with the camera to a PC wirelessly. The Auto Backup feature works only with the Windows OS.
Sending photos or videos to a PC
1 On the camera's Home screen, scroll to
2 Select . You must congure the backup PC information to use the
Auto Backup feature. For more details, refer to Installing the program for Auto Backup on your PC. (p. 121)
3 Press [m] to set options. To turn off your PC automatically after the transfer is complete,
select Shut down PC after backup On.
4 Press [o] to start the backup. To cancel sending, press [o]. You cannot select individual les to backup. This function
backs up only new les on the camera. The backup's progress will be shown on the PC monitor. When the transfer is completed, the camera will turn off
automatically in approximately 30 seconds. Select Cancel to return to the previous screen and prevent the camera from turning off automatically.
Installing the program for Auto Backup on your PC
1 Install Intelli-studio on the PC. (p. 101)
2 Connect the camera to the PC with the USB cable.
3 Click OK on the pop-up window. The Auto Backup program is installed on the PC.
Follow the on-screen instructions to complete the installation
4 Remove the USB cable.
5 Connect the camera to the PC again with the USB cable. The camera stores information about the PC, so that the
camera can send les to the PC.
Before installing the program, ensure that the PC is connected to a network. If no internet connection is available, you must install the program from the provided CD.
Wireless network (DV300F/DV305F only) 122
Using Auto Backup to send photos or videos
If the PC supports the Wake on LAN (WOL) feature, you can turn on the PC automatically by searching for the PC from your camera. (p. 126)
When you connect the camera to the WLAN, select the AP that is connected to the PC.
The camera will search for available access points even if you are connecting to the same access point again.
If you turn off the camera or remove the battery while sending les, the le transfer will be interrupted.
While you are using this feature, only [POWER] is available on your camera.
You can connect only one camera to the PC at a time for sending les.
The backup may be canceled due to network conditions. Photos or videos can be sent to a PC one time only. Files cannot be
sent again even if you reconnect your camera to another PC. When there are no les in the camera memory, you cannot use this
feature. You must turn off Windows Firewall and any other rewalls before
using this feature. You can send up to 1,000 les. On the PC software, the server name must be entered in the Latin
alphabet and can contain no more than 48 characters.
Wireless network (DV300F/DV305F only) 123
Viewing photos or videos on a TV Link-enabled TV TV Link is a technology for sharing media les between a camera and TV connected to the same AP device. With this technology, you can view your photos or videos on a widescreen TV.
4 On the TV, search for the camera and browse the shared photos or videos. For information about searching for the camera and browsing
the photos or videos on the TV, refer to the TV user manual. Videos may not play smoothly depending on the type of TV
or network condition. If this happens, re-record the video in or quality and play it again. If videos do not play smoothly on your TV over the wireless connection, try connecting the camera to the TV with an A/V cable.
AP
1 On the Home screen, scroll to
2 Select . If the guide message appears, press [o]. The camera will automatically attempt to connect to a WLAN
via the most recently connected AP device. If the camera has not previously been connected to a WLAN,
it will search for available AP devices. (p. 108)
3 Connect your TV to a wireless network via an AP device. Refer to your TVs user manual for more information.
Wireless network (DV300F/DV305F only) 124
Viewing photos or videos on a TV Link-enabled TV
You can share up to 1,000 photos or videos. On a TV screen, you can view only photos or videos captured with
your camera. The range of the wireless connection between your camera and a TV
may vary depending on the specications of the AP. If the camera is connected to 2 TVs, playback may be slower. Photos or videos will be shared in their original sizes. You can use this feature only with TV Link-enabled TVs. Shared photos or videos will not be stored on the TV, but they can be
stored in the camera to meet the TV's specications. Transferring photos or videos to the TV may take some time
depending on the network connection, the number of les to be shared, or sizes of the les.
If you power off the camera abnormally while viewing photos or videos on a TV (for example, by removing the battery), the TV considers the camera to still be connected.
The order of photos or videos on the camera may be different than on the TV.
Depending on the number of photos or videos you want to share, it may take some time to load your photos or videos and complete the initial set-up process.
While viewing photos or videos on the TV, continuously using the TV remote or performing additional operations on the TV may prevent this feature from working properly.
If you reorder or sort les on the camera while viewing them on a TV, you must repeat the initial set-up process to update the list of les on the TV.
When there are no les in the camera memory, you cannot use this feature.
Wireless network (DV300F/DV305F only) 125
Sending photos using Wi-Fi Direct When the camera connects via a WLAN to a device that supports the Wi-Fi Direct function, you can send photos to the device. This feature may not be supported on some devices.
1 On the device, turn on the Wi-Fi Direct option.
2 On the camera, in Playback mode, scroll to a photo.
3 Press [m], and then select Share(Wi-Fi) Wi-Fi Direct. When in the single image view, you can send only one photo
at a time. When in the thumbnails view, you can select multiple photos
by scrolling to thumbnails, and then pressing [o]. Select Next when you are nished selecting photos.
4 Select the device from the cameras list of Wi-Fi Direct devices. Ensure that the device's Wi-Fi Direct option is turned on. You can also select your camera from the device's list of
Wi-Fi Direct devices.
5 On the device, allow the camera to connect to the device. The photo will be sent to the device.
When there are no photos in the camera memory, you cannot use this feature.
If you cancel the connection attempt before it is complete, the camera may not be able to reconnect to the device. In this case, update your device with the latest rmware.
Wireless network (DV300F/DV305F only) 126
About the Wake on LAN (WOL) feature With the WOL feature, you can automatically turn on or wake up a PC with your camera. This feature has been available for Samsung desktop PCs for the last 5 years (not available for all-in-one PCs).
Any changes to your PCs BIOS settings other than the ones described below may damage your PC. The manufacturer is not responsible for damage caused by your changing your PCs BIOS settings.
Setting the PC to wake up from sleep mode
1 Click Start, and then open the Control Panel.
2 Congure the network connection. Windows 7:
Click Network and Internet Network and Sharing Center Change adapter settings.
Windows Vista: Click Network and Internet Network and Sharing Center Manage network connections.
Windows XP: Click Network and Internet Connection Network Connection.
3 Right click Local Area, and then click Properties.
4 Click Congure the Power manage tab Allow this device to wake the computer.
5 Click OK.
6 Restart the PC.
Wireless network (DV300F/DV305F only) 127
About the Wake on LAN (WOL) feature
Setting the PC to turn on
1 Turn on the PC, and then press F2 while the PC is booting. The BIOS setting menu will appear.
2 Select Advanced tab Power management Setup.
3 Select Resume on PME Enabled.
4 Press F10 to save your changes, and then continue booting.
5 Click Start, and then open the Control Panel.
6 Congure the network connection. Windows 7:
Click Network and Internet Network and Sharing Center Change adapter settings.
Windows Vista: Click Network and Internet Network and Sharing Center Manage network connections.
Windows XP: Click Network and Internet Connection Network Connection.
7 Select the drivers for the network adapter.
8 Click the Advanced tab, and then set the WOL menus.
You cannot use this feature across a rewall or if a security program has been installed.
To turn on the PC with the WOL feature, the PC must have an active connection to the LAN. Ensure that the indicator light on the PCs LAN port is on indicating that the LAN connection is active.
Depending on your PC model, the camera may only be able to wake the PC.
Depending on your PCs OS or drivers, the names of the WOL setting menu may vary. - examples of setting menu names: Enable PME, Wake on LAN, etc. - examples of setting menu values: Enable, Magic packet, etc.
Settings menu 129 Accessing the settings menu 129 Sound 130 Display 130 Connectivity 131 General 132
Settings Refer to options to congure your cameras settings.
Settings 129
Settings menu Learn to congure your camera's settings.
4 Select an item.
Back Select
Medium
On
Sound 1
Off
On
Volume
Beep Sound
Shutter Sound
Start Sound
AF Sound
Sound
5 Select an option.
Back Select
Off
Low
Medium
High
Volume
6 Press [m] to return to the previous screen.
Accessing the settings menu
1 On the Home screen, scroll to
2 Select .
3 Select a menu.
Settings
Sound
Display
Connectivity
General
Option Description
U Sound: Set various camera sounds and the volume. (p. 130)
Y Display: Customize the display settings. (p. 130)
Connectivity: Set the connection options. (p. 131)
General: Change the settings for the camera system such as memory format and default le name. (p. 132)
Settings 130
Settings menu
Sound * Default
Item Description
Volume Set the volume of all sounds. (Off, Low, Medium*, High)
Beep Sound Set to emit a sound when you press the buttons or switch modes. (Off, On*)
Shutter Sound Set the sound the camera emits when you press the shutter button. (Off, Sound 1*, Sound 2, Sound 3)
Start Sound Set the sound the camera emits when you turn on your camera. (Off*, Star Flight, Laser Show, Cloud)
AF Sound Set to emit a sound when you half-press the shutter button. (Off, On*)
Display * Default
Item Description
Start Image
Set a start image to display when the camera turns on. Off*: Display no start image. Logo: Display a default image stored in the
internal memory. User Image: Select User Image from the
photos you captured in the memory.
The camera will save only one User Image in the internal memory at a time.
If you select a new photo as a User Image or reset your camera, the camera will delete the current image.
Wallpapers Set wallpaper for the Home screen with the desired image. (Wallpaper Gallery, Album)
Guide Line Select a guide to help you compose a scene. (Off*, 3 X 3, 2 X 2, Cross, Diagonal)
Date/Time Display
Set whether or not to display the date and time on the camera's display. (Off*, On)
Help Guide Display
Display a brief description of an option or menu. (Off, On*)
Settings 131
Settings menu
* Default
Item Description
Display Brightness
Adjust the brightness of the screen. (Auto*, Dark, Normal, Bright)
Normal is xed in Playback mode even if you have selected Auto.
Quick View Set whether or not to review a captured image before returning to the Shooting mode. (Off, On*)
Power Save
If you perform no operations for 30 seconds, the camera automatically switches to Power save mode. (Off*, On)
In Power save mode, press any button other than [POWER] to resume using the camera.
Even if you do not set the Power save mode, the screen will dim 30 seconds after the last operation to save power.
Connectivity * Default
Item Description
Video Out
Set the video signal output for your region. NTSC: USA, Canada, Japan, Korea, Taiwan,
Mexico PAL (supports only BDGHI): Australia, Austria,
Belgium, China, Denmark, England, Finland, France, Germany, Italy, Kuwait, Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain, Sweden, Switzerland, Thailand
USB
Select the mode to use when you connect the camera to a computer or printer with a USB cable. Computer*: Connect your camera to a
computer for transferring les. Printer: Connect your camera to a printer for
printing les. Select Mode: Manually select the USB mode
when you connect your camera to a device.
PC Software Set Intelli-studio to launch automatically when you connect your camera to your computer. (Off, On*)
Settings 132
Settings menu
General * Default
Item Description
Device Information (DV300F/DV305F only)
See the Mac address and serial number of your camera.
Language Set a language for the display text.
Time Zone
Set the time zone for your location. When you travel to another country, select Visit, and then select the appropriate time zone. (Home*, Visit)
Date/Time Set Set the date and time.
Date Type
Set a date format. (YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY)
The default date type may differ depending on the language selected.
Time Type
Set the time format. (12 Hr, 24 Hr)
The default time type may differ depending on the language selected.
* Default
Item Description
File No.
Specify how to name les. Reset: Set the le number to start from
0001 when you insert a new memory card, format a memory card, or delete all les.
Series*: Set the le number to resume from the previous le number when you insert a new memory card, format a memory card, or delete all les.
The default name of the rst folder is 100PHOTO and the default name of the rst le is SAM_0001.
The le number increases by one, from SAM_0001 to SAM_9999, each time you take a picture.
The folder number increases by one, from 100PHOTO to 999PHOTO, each time a folder is full.
The maximum number of les that can be stored in one folder is 9,999.
The camera denes le names according to the Design rule for Camera File system (DCF) standard. If you intentionally change le names, the camera may not play back the les.
Settings 133
Settings menu
* Default
Item Description
Imprint
Set whether or not to display the date and time on captured photos. (Off*, Date, Date & Time)
The date and time will be displayed on the bottom right corner of the photo.
Some printer models may not print the date and time properly.
The photo will not display the date and time if: - you select Text in Scene mode - you select Live Panorama, Picture in
Picture, Self Shot, Children, Jump Shot, Intelligent Portrait, Funny Face, or Motion Photo
- you capture a photo with the front display
Auto Power Off
Set the camera to automatically turn off when you perform no operations for a specied period. (Off, 1 min, 3 min*, 5 min, 10 min)
Your settings will not change when you replace the battery.
The camera will not automatically turn off when the camera is connected to a computer, printer, or WLAN, and when you are playing a slide show or videos.
AF Lamp Set a light to automatically turn on in dark places to help you focus. (Off, On*)
* Default
Item Description
Format
Format the internal memory and the memory card. Formatting will delete all les, including protected les. (Yes, No)
Errors can occur if you use a memory card formatted by another brand of camera, a memory card reader, or a computer. Please format memory cards in the camera before using them to capture photos.
Reset Reset menus and shooting options. Date and time, language, and video output settings will not be reset. (Yes, No)
Error messages 135
Camera maintenance 137 Cleaning your camera 137 Using or storing the camera 138 About memory cards 139 About the battery 142
Before contacting a service center 146
Camera specications 149
Glossary 153
FCC notice 158
Declaration sentence in ofcial languages 161
Index 163
Appendixes Get information about error messages, specications, and maintenance.
Appendixes 135
Error messages When the following error messages appear, try these remedies.
Error message Suggested remedies
Device disconnected.
Network connection disconnected while transferring photos. Select a TV Link device again.
File Error Delete the damaged le or contact a service center.
File system not supported.
Your camera does not support the FAT le structure of the inserted memory card. Format the memory card on the camera.
Initialization failed.
Turn on TV Link enabled devices on the network.
The camera has failed to locate a TV Link- enabled device.
Invalid password. The password for transferring les to another camera is wrong. Enter the correct password again.
Low Battery Insert a charged battery or recharge the battery.
Memory Full Delete unnecessary les or insert a new memory card.
Error message Suggested remedies
Card Error
Turn off your camera, and then turn it on again.
Remove your memory card, and then insert it again.
Format your memory card.
Card not supported.
The inserted memory card is not supported by your camera. Insert a microSD, microSDHC, or microSDXC memory card.
Connection failed.
The camera cannot connect to the network using the selected access point. Select another AP and try again.
The camera has failed to connect to the other camera. Try connecting again.
DCF Full Error
File names do not match the DCF standard. Transfer the les from the memory card to your computer and format the card. Then, open the Settings menu and select File No. Reset. (p. 132)
Appendixes 136
Error messages
Error message Suggested remedies
No Image File Capture photos or insert a memory card that contains some photos.
Photo transfer failed.
Network connection disconnected while transferring photos. Try turning on the TV Link feature again.
Photo reception failed.
The camera has failed to receive a photo from the sending camera. Ask the other person to send the le again.
Transfer failed.
The camera has failed to send a photo to the other camera. Try sending again.
The camera has failed to send an email or transfer a photo to a TV Link device. Check the network connection and try again.
Appendixes 137
Camera maintenance
Camera body Wipe gently with a soft, dry cloth.
Never use benzene, thinners, or alcohol to clean the device. These solutions can damage the camera or cause it to malfunction.
Do not press on the lens cover or use a blower brush on the lens cover.
Cleaning your camera
Camera lens and display Use a blower brush to remove dust and wipe the lens gently with a soft cloth. If any dust remains, apply lens cleaning liquid to a piece of lens cleaning paper and wipe gently.
Appendixes 138
Camera maintenance
Storing for extended period of time When you store the camera for an extended period, place it in a
sealed container with an absorbent material, such as silica gel. Remove the batteries from your camera when storing it for an
extended period. Installed batteries may leak or corrode over time and cause serious damage to your camera.
Over time, unused batteries will discharge and must be recharged before use.
The present date and time can be initialized when the camera is turned on after the camera and battery have been separated for over 40 hours.
Using the camera with caution in humid environments When you transfer the camera from a cold environment to a warm one, condensation can form on the lens or internal components of the camera. In this situation, turn off the camera and wait for at least 1 hour. If condensation forms on the memory card, remove the memory card from the camera and wait until all moisture has evaporated before reinserting it.
Other cautions Do not swing your camera by the strap. This may cause injury
to yourself or others or damage to your camera. Do not paint your camera, as paint can clog moving parts and
prevent proper operation. Turn off the camera when not using it.
Using or storing the camera
Inappropriate places to use or store the camera Avoid exposing the camera to very cold or very hot
temperatures. Avoid using your camera in areas with extremely high humidity,
or where the humidity changes drastically. Avoid exposing the camera to direct sunlight and storing it in
hot, poorly-ventilated areas, such as in a car during summer time.
Protect your camera and the display from impact, rough handling, and excessive vibration to avoid serious damage.
Avoid using or storing your camera in dusty, dirty, humid, or poorly-ventilated areas to prevent damage to moving parts and internal components.
Do not use your camera near fuels, combustibles, or ammable chemicals. Do not store or carry ammable liquids, gases, or explosive materials in the same compartment as the camera or its accessories.
Do not store the camera where there are mothballs.
Using on beaches or shores Protect your camera from sand and dirt when you use it on
beaches or in similar areas. Your camera is not waterproof. Do not handle the battery,
adapter, or memory card with wet hands. Operating the camera with wet hands may cause damage to your camera.
Appendixes 139
Camera maintenance
Paint or metal on the outside of the camera may cause allergies, itchy skin, eczema, or swelling for people with sensitive skin. If you experience any of these symptoms, stop using the camera immediately and consult a doctor.
Do not insert foreign objects into any of your cameras compartments, slots, or access points. Damage due to improper use may not be covered by your warranty.
Do not allow unqualied personnel to service the camera or attempt to service the camera yourself. Any damage that results from unqualied service is not covered by your warranty.
About memory cards
Supported memory cards Your camera supports microSD, microSDHC, or microSDXC memory cards.
To read data with a PC or memory card reader, insert the memory card into a memory card adapter.
Your camera contains delicate parts. Avoid impacts to the camera.
Protect the display from external force by keeping it in the case when not in use. Protect the camera from scratches by keeping it away from sand, sharp implements, or loose change.
Do not use the camera if the screen is cracked or broken. Broken glass or acrylic could cause injury to your hands and face. Take the camera to a Samsung service center to have it repaired.
Never place cameras, batteries, chargers, or accessories near, on, or in heating devices, such as microwave ovens, stoves, or radiators. These devices may be deformed and can overheat and cause a re or explosion.
Do not expose the lens to direct sunlight, as this may discolor the image sensor or cause it to malfunction.
Protect the lens from ngerprints and scratches. Clean the lens with a soft, clean, debris-free lens cloth.
The camera may turn off if struck or dropped. This is to protect the memory card. Turn on the camera to use it again.
While you use the camera, it may heat up. This is normal and should not affect your cameras lifespan or performance.
When you use the camera in low temperatures, it may take some time to turn on, the color of the display may be changed temporarily, or after-images may appear. These conditions are not malfunctions and they will correct themselves when the camera is returned to milder temperatures.
Appendixes 140
Camera maintenance
Memory card capacity The memory capacity may differ depending on shooting scenes or shooting conditions. These capacities are based on a 1 GB microSD card:
Photo
Size Super Fine Fine Normal
105 206 303
117 230 337
140 275 406
166 323 469
319 607 858
522 954 1,336
742 1,336 1,878
1,582 2,505 3,006
Video
Size 30fps 15fps
1280 X 720 Approx. 14' 55"
Approx. 28' 54"
640 X 480 Approx. 34' 55"
Approx. 65' 40"
320 X 240 Approx. 134' 34"
Approx. 231' 14"
For Sharing (DV300F/DV305F only)
Approx. 134' 34"
Approx. 231' 14"
* The gures above are measured without using the zoom function. Available recording time may vary if you use the zoom. Several videos were recorded in succession to determine the total recording time.
Appendixes 141
Camera maintenance
Prevent memory cards from making contact with liquids, dirt, or foreign substances. If dirty, wipe the memory card clean with a soft cloth before you insert the memory card into your camera.
Do not allow liquids, dirt, or foreign substances to come in contact with memory cards or the memory card slot. Doing so may cause memory cards or the camera to malfunction.
When you carry a memory card, use a case to protect the card from electrostatic discharges.
Transfer important data to other media, such as a hard disk, CD, or DVD.
When you use the camera for an extended period, the memory card may become warm. This is normal and does not indicate a malfunction.
The manufacturer is not responsible for any loss of data.
Cautions when using memory cards Avoid exposing memory cards to very cold or very hot
temperatures (below 0 C/32 F or above 40 C/104 F). Extreme temperatures can cause memory cards to malfunction.
Insert a memory card in the correct direction. Inserting a memory card in the wrong direction may damage your camera and memory card.
Do not use memory cards that have been formatted by other cameras or by a computer. Reformat the memory card with your camera.
Turn off the camera before you insert or remove the memory card.
Do not remove the memory card or turn off your camera while the lamp is blinking, as this may damage your data.
When the lifespan of a memory card has expired, you cannot store any more photos on the card. Use a new memory card.
Do not bend, drop, or subject memory cards to heavy impact or pressure.
Avoid using or storing memory cards near strong magnetic elds.
Avoid using or keeping memory cards in areas with high temperature, high humidity, or corrosive substances.
Appendixes 142
Camera maintenance
Battery life
Average shooting time/ Number of photos
Test conditions (when the battery is fully charged)
Photos
Approximately 130 min/ Approximately 260 photos
The battery life was measured under the following conditions: in Program mode, in darkness, resolution, Fine quality, OIS on.
1. Set the ash option to Fill in, take a single shot, and zoom in or out.
2. Set the ash option to Off, take a single shot, and zoom in or out.
3. Perform steps 1 and 2, waiting 30 seconds between each step. Repeat the process for 5 minutes, and then turn off the camera for 1 minute.
4. Repeat steps 1 to 3.
Videos Approximately 80 min
Record videos at resolution and 30 FPS.
The gures above are measured by Samsungs standards. Your results may differ, depending on your actual usage.
Several videos were recorded in succession to determine the total recording time.
When using network functions, the battery will be depleted more quickly.
About the battery Use only Samsung-approved batteries.
Battery specications
Specication Description
Model BP88A
Type Lithium-ion battery
Cell capacity 880 mAh
Voltage 3.7 V
Charging time* (when the camera is switched off)
Approximately 210 min
* Charging the battery by connecting it to a computer may take longer.
Appendixes 143
Camera maintenance
Cautions about using the battery Protect batteries, chargers, and memory cards from damage Prevent batteries from making contact with metal objects, as this can create a connection between the + and terminals of your battery and lead to temporary or permanent battery damage and may cause a re or electric shock.
Notes about charging the battery If the status lamp is off, make sure that the battery is inserted
correctly. If the camera is on while charging, the battery may not fully
charge. Turn off the camera before charging the battery. Do not use your camera when you are charging the battery.
This may cause a re or electric shock. Do not pull the power supply cord to disconnect the plug from
the power outlet, as this may cause a re or electric shock. Let the battery charge for at least 10 minutes before turning on
the camera. If you connect the camera to an external power source when
the battery is depleted, using high energy-consuming functions will cause the camera to turn off. To use the camera normally, recharge the battery.
Low battery message When the battery has fully discharged, the battery icon will turn red and the "Low Battery" message will appear.
Notes about using the battery Avoid exposing batteries to very cold or very hot temperatures
(below 0 C/32 F or above 40 C/104 F). Extreme temperatures can reduce the charging capacity of your batteries.
When you use the camera for an extended period, the area around the battery chamber may become warm. This does not affect the normal use of the camera.
Do not pull the power supply cord to disconnect the plug from the power outlet, as this may cause a re or electric shock.
In temperatures below 0 C/32 F, battery capacity and battery life may decrease.
Battery capacity may decrease in low temperatures but will return to normal in milder temperatures.
Appendixes 144
Camera maintenance
If you reconnect the power cable when the battery is fully charged, the status lamp turns on for approximately 30 minutes.
Using the ash or recording videos depletes the battery quickly. Charge the battery until the red status lamp turns off.
If the status lamp blinks in red, reconnect the cable, or remove the battery and insert it again.
If you charge the battery when the cable is overheated or the temperature is too high, the status lamp may blink in red. Charging will start when the battery cools down.
Overcharging batteries may shorten battery life. After charging is nished, disconnect the cable from your camera.
Do not bend or place heavy objects on the AC cable. Doing so may damage the cable.
Notes about charging with a computer connected Use only the provided USB cable. The battery may not charge when:
- you use a USB hub - other USB devices are connected to your computer - you connect the cable to the port on the front side of your computer
- the USB port of your computer does not support the power output standard (5 V, 500 mA)
Handling and disposing of batteries and chargers with care
Never dispose of batteries in a re. Follow all local regulations when you dispose of used batteries.
Never place batteries or cameras on or in heating devices, such as microwave ovens, stoves, or radiators. Batteries may explode when they are overheated.
Appendixes 145
Camera maintenance
Personal injury or death can occur if the battery is handled carelessly or improperly. For your safety, follow these instructions for proper battery handling: The battery can ignite or explode if not handled properly.
If you notice any deformities, cracks, or other abnormalities in the battery, immediately discontinue use of the battery and contact a service center.
Use only authentic, manufacturer-recommend battery chargers and adapters and charge the battery only by the methods described in this user manual.
Do not place the battery near heating devices or expose it to excessively warm environments, such as the inside of an enclosed car in the summertime.
Do not place the battery in a microwave oven. Avoid storing or using the battery in hot, humid places,
such as spas or shower enclosures. Do not rest the device on ammable surfaces, such as
bedding, carpets, or electric blankets for a prolonged period.
When the device is switched on, do not leave it in any conned space for a prolonged period.
Do not allow battery terminals to come in contact with metallic objects, such as necklaces, coins, keys, or watches.
Use only authentic, manufacturer-recommended, Lithium-ion replacement batteries.
Do not disassemble or puncture the battery with any sharp object.
Avoid exposing the battery to high pressure or crushing forces.
Avoid exposing the battery to major impacts, such as dropping it from high places.
Do not expose the battery to temperatures of 60 C (140 F) or above.
Do not allow the battery to come in contact with moisture or liquids.
Do not expose the battery to sources of excessive heat such as sunshine, re or the like.
Disposal guidelines Dispose of the battery with care. Do not dispose of the battery in a re. Disposal regulations may differ by country or region.
Dispose of the battery in accordance with all local and federal regulations.
Guidelines for charging the battery Charge the battery only by the method described in this user manual. The battery can ignite or explode if not charged properly.
Appendixes 146
Before contacting a service center If you are having trouble with your camera, try these troubleshooting procedures before you contact a service center. If you have attempted the suggested remedy and are still having problems with your device, contact your local dealer or service center.
When you leave your camera at a service center, be sure to also leave the other components that may have contributed to the malfunction, such as the memory card and battery.
Situation Suggested remedies
Cannot capture photos
There is no space on the memory card. Delete unnecessary les or insert a new card.
Format the memory card. The memory card is defective. Get a new
memory card. Make sure that the camera is switched
on. Charge the battery. Make sure that the battery is inserted
correctly.
The camera freezes Remove the battery and insert it again.
The camera heats up While you use the camera, it may heat up. This is normal and should not affect your cameras lifespan or performance.
The ash does not work The ash option may be set to Off.
(p. 64) You cannot use the ash in some modes.
Situation Suggested remedies
Cannot turn on the camera
Ensure that the battery is inserted. Ensure that the battery is inserted
correctly. (p. 17) Charge the battery.
The power turns off suddenly
Charge the battery. Your camera may be in Auto Power Off
mode. (p. 133) The camera may turn off to prevent the
memory card from being damaged due to an impact. Turn on your camera again.
The camera is losing battery power quickly
The battery may lose power more quickly in low temperatures (below 0 C/32 F). Keep the battery warm by putting it into your pocket.
Using the ash or recording videos depletes the battery quickly. Recharge if needed.
Batteries are consumable parts that must be replaced over time. Get a new battery if the battery life is diminishing quickly.
Appendixes 147
Before contacting a service center
Situation Suggested remedies
The ash res unexpectedly
The ash may re due to static electricity. The camera is not malfunctioning.
The date and time are incorrect
Set the date and time in the display settings. (p. 132)
The display or buttons do not work
Remove the battery, and then insert it again.
The camera display responds poorly
If you use your camera at very low temperatures, it may cause the camera screen to malfunction or discolor. For better performance of your camera screen, use your camera in moderate temperatures.
The memory card has an error
Turn off your camera, and then turn it on again.
Remove your memory card, and then insert it again.
Format your memory card. See Cautions when using memory cards for more detail. (p. 141)
Cannot play back les
If you change the name of a le, your camera may not play the le (the name of the le should meet the DCF standard). If you encounter this situation, play back the les on your computer.
Situation Suggested remedies
The photo is blurry
Make sure that the focus option you set is suitable for close-up shots. (p. 67)
Make sure that the lens is clean. If not, clean the lens. (p. 137)
Make sure that the subject is within range of the ash. (p. 150)
The colors in the photo do not match the actual scene
An incorrect White Balance can create unrealistic color. Select the proper White Balance option to suit the light source. (p. 76)
The photo is too bright
Your photo is overexposed. Turn off the ash. (p. 64) Adjust the ISO sensitivity. (p. 66) Adjust the exposure value. (p. 74)
The photo is too dark
Your photo is underexposed. Turn on the ash. (p. 64) Adjust the ISO sensitivity. (p. 66) Adjust the exposure value. (p. 74)
Appendixes 148
Before contacting a service center
Situation Suggested remedies
The TV does not display your photos
Make sure that the camera is correctly connected to the TV with the A/V cable.
Make sure that your memory card contains photos.
Your computer does not recognize your camera
Make sure that the USB cable is connected correctly.
Make sure that your camera is switched on.
Make sure that you are using a supported operating system.
Your computer disconnects the camera while transferring les
The le transmission may be interrupted by static electricity. Disconnect the USB cable and connect it again.
Your computer cannot play videos
Videos may not play on some video player programs. To play video les captured with your camera, install and use the Intelli-studio program on your computer. (p. 101)
Situation Suggested remedies
Intelli-studio is not functioning properly
End Intelli-studio and restart the program. You cannot use Intelli-studio on
Macintosh computers. Make sure that PC Software is set to
On in the settings menu. (p. 131) Depending on your computer's
specications and environment, the program may not launch automatically. In this case, click Start All Programs SAMSUNG Intelli-studio Intelli-studio on your computer.
Your TV or computer cannot display photos and videos that are stored on a microSDXC memory card.
microSDXC memory cards use the exFAT le system. Ensure that the external device is compatible with the exFAT le system before connecting the camera to the device.
Your computer does not recognize a microSDXC memory card.
microSDXC memory cards use the exFAT le system. To use microSDXC memory cards on a Windows XP computer, download and update the exFAT le system driver from the Microsoft website.
Appendixes 149
Camera specications
Range
Wide (W) Tele (T)
Normal (AF) 80 cminnity 250 cminnity
Macro 580 cm 100250 cm
Auto Macro 5 cminnity 100 cminnity
Shutter speed
Auto: 1/81/2,000 sec.
Program: 11/2,000 sec.
Night: 161/2,000 sec.
Fireworks: 2 sec.
Exposure
Control Program AE
Metering Multi, Spot, Center-weighted, Face Detection
Compensation 2EV (1/3 EV Step)
ISO equivalent Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800, ISO 1600, ISO 3200
Image sensor
Type 1/2.3" (Approximately 7.76 mm) CCD
Effective pixels Approximately 16.1 mega-pixels
Total pixels Approximately 16.4 mega-pixels
Lens
Focal length Samsung Lens f = 4.522.5 mm (35 mm lm equivalent: 25125 mm)
F-stop range F2.5 (W)F6.3 (T)
Zoom Still image mode: 1.05.0X (Optical zoom X Digital zoom: 25.0X, Optical zoom X Intelli zoom: 10.0X)
Display
Type TFT LCD
Feature Main display: 3.0" (7.62 cm) 460K
Front display: 1.5" (3.8 cm) 61K
Focusing
Type TTL auto focus (Center AF, Multi AF, Tracking AF, Face Detection AF, Smart Face Recognition AF)
Appendixes 150
Camera specications
Flash
Mode Smart Auto, Auto, Red-eye, Fill in, Slow Sync, Off, Red-eye Fix
Range Wide: 0.24.1 m (ISO Auto)
Tele: 0.51.6 m (ISO Auto)
Recharging time Approximately 4 sec.
Shake reduction
Optical Image Stabilization (OIS)
Effect
Photo Shooting mode
Photo Filter (Smart Filter): Miniature, Vignetting, Ink Painting, Oil Painting, Cartoon, Cross Filter, Sketch, Soft Focus, Fish-eye, Old Film, Half Tone Dot, Classic, Retro, Zooming Shot
Image Adjust: Sharpness, Contrast, Saturation
Video Shooting mode
Movie Filter (Smart Filter): Miniature, Vignetting, Half Tone Dot, Sketch, Fish-eye, Classic, Retro, Palette Effect 1, Palette Effect 2, Palette Effect 3, Palette Effect 4
White Balance
Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten, Custom Set
Date Imprinting
Date & Time, Date, Off
Shooting
Photos
Modes: Smart Auto (Portrait, Night Portrait, Backlight Portrait, Night, Backlight, Landscape, White, Natural Green, Blue Sky, Sunset, Macro, Macro text, Macro Color, Tripod, Action, Fireworks), Program, Scene (Landscape, Sunset, Dawn, Backlight, Beach & Snow, Text), Live Panorama, Picture in Picture, Self Shot, Children, Jump Shot, Beauty Shot, Intelligent Portrait, Night Shot, Close-up Shot, Magic Frame, Funny Face, Photo Filter, Split Shot, Artistic Brush, Motion Photo
Burst: Single, Continuous, Motion Capture, AEB
Timer: Off, 10 Sec, 2 Sec, Double (10 Sec, 2 Sec)
Videos
Modes: Smart Movie (Landscape, Blue Sky, Natural Green, Sunset), Movie, Picture in Picture, Movie Filter
Format: MP4 (H.264) (Max recording time: 20 min)
Size: 1280 X 720, 640 X 480, 320 X 240, For Sharing (DV300F/DV305F only)
Frame Rate: 30fps, 15fps
Sound Alive: Sound Alive On, Sound Alive Off, Mute
OIS: On, Off
Video editing (embedded): Pause during recording
Appendixes 151
Camera specications
Playback
Photos
Type: Single image, Thumbnails, Multi Slide Show with Music and Effect, Movie clip, Smart Album*
* Smart Album category: All, Date, Face List, File Type
Edit: Resize, Rotate, Image Adjust, Smart Filter, Crop
Effect: Image Adjust (Brightness, Contrast, Saturation, ACB, Face Retouch, Red-eye Fix), Smart Filter (Normal, Miniature, Vignetting, Ink Painting, Oil Painting, Cartoon, Cross Filter, Sketch, Soft Focus, Fish-eye, Old Film, Half Tone Dot, Classic, Retro, Zooming Shot)
Videos Edit: Still image capture, Time trimming
Storage
Media
Internal memory: Approximately 16 MB
External memory (Optional): microSD card (12 GB guaranteed), microSDHC card (up to 32 GB guaranteed), microSDXC card (up to 64 GB guaranteed)
Internal memory capacity may not match these specications.
File format
Still Image: JPEG (DCF), EXIF 2.21, DPOF 1.1, PictBridge 1.0, GIF
Movie Clip: MP4 (Video: MPEG-4.AVC/H.264, Audio: AAC)
Image size
For 1 GB microSD: Number of photos
Super Fine Fine Normal
4608 X 3456 105 206 303
4608 X 3072 117 230 337
4608 X 2592 140 275 406
3648 X 2736 166 323 469
2592 X 1944 319 607 858
1984 X 1488 522 954 1,336
1920 X 1080 742 1,336 1,878
1024 X 768 1,582 2,505 3,006
These gures are measured under Samsungs standard conditions. Your results may vary depending on the shooting conditions and camera settings.
Appendixes 152
Camera specications
Dimensions (W X H X D)
95.2 X 56.5 X 18.3 mm (3.75 X 2.22 X 0.72 in.) (without protrusions)
Weight
120 g (4.233 oz.) (without battery and memory card)
Operating Temperature
040 C (32104 F)
Operating Humidity
585 %
Software
Intelli-studio
Specications may change without notice to improve performance.
Wireless network (DV300F/DV305F only)
Social Sharing, Email, MobileLink, Remote Viewnder, Cloud, Auto Backup, TV Link, Authentication Browser, Wi-Fi Direct
Interface
Digital output connector
USB 2.0
Audio input/ output
Internal speaker (Mono), Microphone (Mono)
Video output A/V: NTSC, PAL (selectable)
DC power input connector
5 V
Power source
Rechargeable battery
Lithium-ion battery (BP88A, 880 mAh)
Connector type Micro USB (5 pin)
The power source may differ depending on your region.
Appendixes 153
Glossary
Composition Composition in photography means arranging objects in a photo. Usually, abiding by the rule of thirds leads to a good composition.
DCF (Design rule for Camera File system) A specication to dene a le format and le system for digital cameras created by the Japan Electronics and Information Technology Industries Association (JEITA).
Depth of eld The distance between the nearest and farthest points that can be acceptably focused in a photograph. Depth of eld varies with lens aperture, focal length, and distance from the camera to the subject. Selecting a smaller aperture, for example, will increase the depth of eld and blur the background of a composition.
Digital zoom A feature that articially increases the amount of zoom available with a zoom lens (Optical zoom). When using the Digital zoom, the image quality will deteriorate as the magnication increases.
ACB (Auto Contrast Balance) This feature automatically improves the contrast of your images when the subject is backlit or when there is a high contrast between your subject and the background.
AEB (Auto Exposure Bracket) This feature automatically captures several images at different exposures to help you capture a properly-exposed image.
AF (Auto Focus) A system that automatically focuses the camera lens on the subject. Your camera uses the contrast to focus automatically.
Aperture The aperture controls the amount of light that reaches the cameras sensor.
Camera shake (Blur) If the camera is moved while the shutter is open, the entire image may appear blurred. This occurs more often when the shutter speed is slow. Prevent camera shake by raising the sensitivity, using the ash, or using a faster shutter speed. Alternately, use a tripod, the DIS or OIS function to stabilize the camera.
Appendixes 154
Glossary
Exposure The amount of light allowed to reach the cameras sensor. Exposure is controlled by a combination of the shutter speed, the aperture value, and ISO sensitivity.
Flash A speed light that helps to create adequate exposure in low-light conditions.
Focal length The distance from the middle of the lens to its focal point (in millimeters). Longer focal lengths result in narrower angles of view and the subject is magnied. Shorter focal lengths result in wider angles of view.
H.264/MPEG-4 A high-compression video format established by international standard organizations ISO-IEC and ITU-T and developed by the Joint Video Team (JVT). This codec is capable of providing good video quality at low bit rates.
DPOF (Digital Print Order Format) A format for writing printing information, such as selected images and number of prints, on a memory card. DPOF-compatible printers, sometimes available at photo shops, can read the information from the card for convenient printing.
EV (Exposure Value) All the combinations of the cameras shutter speed and lens aperture that result in the same exposure.
EV Compensation This feature allows you to quickly adjust the exposure value measured by the camera, in limited increments, to improve the exposure of your photos. Set the EV compensation to -1.0 EV to adjust the value one step darker and 1.0 EV to one step brighter.
Exif (Exchangeable Image File Format) A specication to dene an image le format for digital cameras created by the Japan Electronic Industries Development Association (JEIDA).
Appendixes 155
Glossary
Macro This feature allows you to capture close-up photos of very small objects. When using the macro feature, the camera can maintain a sharp focus on small objects at a near life-size ratio (1:1).
Metering The metering refers to the way in which the camera measures the quantity of light to set the exposure.
MJPEG (Motion JPEG) A video format which is compressed as a JPEG image.
Noise Misinterpreted pixels in a digital image that may appear as misplaced or random, bright pixels. Noise usually occurs when photos are shot with a high sensitivity or when a sensitivity is automatically set in a dark place.
OIS (Optical Image Stabilization) This feature compensates in real-time for shaking and vibrating while shooting. There is no image degradation compared to Digital Image Stabilization feature.
Image sensor The physical part of a digital camera that contains a photosite for each pixel in the image. Each photosite records the brightness of the light that strikes it during an exposure. Common sensor types are CCD (Charge-coupled Device) and CMOS (Complementary Metal Oxide Semiconductor).
ISO sensitivity The sensitivity of the camera to light, based on the equivalent lm speed used in a lm camera. At higher ISO sensitivity settings, the camera uses a higher shutter speed, which can reduce blur caused by camera shake and low light. However, images with high sensitivity are more susceptible to noise.
JPEG (Joint Photographic Experts Group) A lossy method of compression for digital images. JPEG images are compressed to reduce their overall le size with minimal deterioration of the image resolution.
LCD (Liquid Crystal Display) A visual display commonly used in consumer electronics. This display needs a separate backlight, such as CCFL or LED, to reproduce colors.
Appendixes 156
Glossary
Vignetting A reduction of an images brightness or saturation at the periphery (outer edges) compared to the center of the image. Vignetting can draw interest to subjects positioned in the center of an image.
White balance (color balance) An adjustment of the intensities of colors (typically the primary colors red, green, and blue), in an image. The goal of adjusting the white balance, or color balance, is to correctly render the colors in an image.
Optical zoom This is a general zoom which can enlarge images with a lens and does not deteriorate quality of images.
Quality An expression of the rate of compression used in a digital image. Higher quality images have a lower rate of compression, which usually results in a larger le size.
Resolution The number of pixels present in a digital image. High resolution images contain more pixels and typically show more detail than low resolution images.
Shutter speed Shutter speed refers to the amount of time it takes to open and close the shutter, and it is an important factor in the brightness of a photo, as it controls the amount of light which passes through the aperture before it reaches the image sensor. A fast shutter speed allows less time to let light in and the photo becomes darker and more easily freezes subjects in motion.
Appendixes 157
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government ofce, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
PlanetFirst represents Samsung Electronics' commitment to sustainable development and social responsibility through eco-driven business and management activities.
Correct disposal of batteries in this product (Applicable in the European Union and other European countries with separate battery return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.
This Class [B] digital apparatus complies with Canadian ICES-003.
Dispose unwanted electronics through an approved recycler. To nd the nearest recycling location, go to our website: www.samsung.com/recyclingdirect Or call, (877) 278 - 0799
Appendixes 158
FCC notice
Caution: Any changes or modications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorientate, or relocate, the receiving antenna. - Increase the distance between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
Declaration of Conformity Trade Name : Samsung Electronics America, Inc.
Model No. : Samsung DV300/DV300F/ DV305/DV305F
Responsible Party : Samsung Electronics America, Inc.
Address : 85 Challenger Road, Ridgeeld Park, NJ 07660
Telephone No. : 1-800-SAMSUNG (726-7864)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID:A3LDV300F
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF exposure statements: This device is for handheld operation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Appendixes 159
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment. IC: 649E-DV300F
This equipment may be operated in all EU countries. In France, this equipment may only be used indoors.
Complies with IDA Standards
DA100790
Approved by PTA, year 2012
No.: ESD-1205936C
93 8
NO-L-14041/01/2011/ETA/2012 1668/2012/WRLO
TA-2011/1536 APPROVED
Appendixes 160
Declaration of Conformity
and the Eco-Design Directive (2009/125/EC) implemented by Regulations (EC) No 278/2009 for external power supplies.
Representative in the EU
Samsung Electronics Euro QA Lab. Blackbushe Business Park Saxony Way, Yateley, Hampshire GU46 6GG, UK
(YEAR TO BEGIN AFFIXING CE MARKING 2011)
22 December, 2011
(Place and date of issue)
Joong-Hoon Choi / Lab. Manager
(Name and signature of authorized person)
* This is not the address of Samsung Service Centre. For the address or the phone number of Samsung Service Centre, see the warranty card or contact the retailer where you purchased your product.
Product details
For the following
Product : DIGITAL CAMERA
Model(s) : DV300F, DV305F
Declaration & Applicable standards
We hereby declare that the product(s) above is(are) in compliance with the essential requirements and other provisions of the R&TTE Directive (1999/5/EC), the Low Voltage Directive (2006/95/EC) and the Electromagnetic Compatibility Directive (2004/108/EC) by application of:
EN 60950-1:2006+A1:2010 EN 55024:1998+A1:2001+A2:2003
EN 55022:2006+A1 :2007 EN 61000-3-2:2006 +A1:2009 +A2:2009
EN 61000-3-3:2008 EN 300 328 v1.7.1
EN 301 489-1 v1.8.1 EN 301 489-17 V2.1.1
EN62311 :2008
Appendixes 161
Declaration sentence in ofcial languages
Nation Declaration
Cesky Samsung Electronics tmto prohlauje, e tento digitln fotoapart je ve shod se zkladnmi poadavky a dalmi pslunmi ustanovenmi smrnice 1999/5/ES.
Dansk Samsung Electronics erklrer herved, at digitale kameraer overholder de vsentlige krav og vrige relevante krav i direktiv 1999/5/EF.
Deutsch Hiermit erklrt Samsung Electronic, dass sich die Digitalkamera in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlgigen Bestimmungen der Richtlinie 1999/5/EG bendet.
Eesti Kesolevaga kinnitab Samsung Electronics digitaalkaamera vastavust direktiivi 1999/5/E phinuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele stetele.
English Hereby, Samsung Electronics declares that this digital camera is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Espaol Por medio de la presente Samsung Electronics declara que la cmara digital cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Samsung Electronics 1999/5/.
Franais Par la prsente Samsung Electronic dclare que l'appareil photo numrique est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano Con la presente Samsung Electronicsdichiara che questa fotocamera digitale conforme ai requisiti essenziali e alle altre disposizioni stabilite dalla Direttiva 1999/5/CE.
Latviski Ar o Samsung Electronics deklar, ka digitl kamera atbilst Direktvas 1999/5/EK btiskajm prasbm un citiem ar to saisttajiem noteikumiem.
Lietuvi iuo Samsung Electronics deklaruoja, kad is skaitmeninis fotoaparatas, atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands Hierbij verklaart Samsung Electronics dat de digitale camera in overeenstemming is met de essentile eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Appendixes 162
Declaration sentence in ofcial languages
Nation Declaration
Malti Hawnhekk, Samsung Electronics, tiddikjara li din il-kamera diitali hi konformi mar-rekwiiti essenzjali u ma' dispoizzjonijiet rilevanti orajn ta' Direttiva 1999/5/KE.
Magyar A Samsung Electronics kijelenti, hogy ez a digitlis fnykpezgp megfelel az 1999/5/EK irnyelv alapvet kvetelmnyeinek s egyb vonatkoz elrsainak.
Polski Niniejszym rma Samsung Electronics owiadcza, e ten aparat cyfrowy jest zgodny z zasadniczymi wymogami oraz pozostaymi stosownymi postanowieniami Dyrektywy 1999/5/WE.
Portugus Samsung Electronics declara que esta cmera digital est conforme os requisitos essenciais e outras disposies da Directiva 1999/5/CE.
Slovensko Samsung Electronics izjavlja, da je ta digitalni fotoaparat v skladu z bistvenimi zahtevami in ostalimi relevantnimi doloili direktive 1999/5/ES.
Slovensky Samsung Electronics tmto vyhlasuje, e tento digitlny fotoapart spa zkladn poiadavky a vetky prslun ustanovenia Smernice 1999/5/ES.
Suomi Samsung Electronics vakuuttaa tten ett tm digitaalikamera on direktiivin 1999/5/EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen.
Svenska Hrmed intygar Samsung Electronicsatt dessa digitalkameror str i verensstmmelse med de vsentliga egenskapskrav och vriga relevanta bestmmelser som framgr av direktiv 1999/5/EG.
Samsung Electronics , 1999/5/.
Romn Prin prezenta, Samsung Electronics, declar c aceast camer foto digital este n conformitate cu cerinele eseniale i alte prevederi relevante ale Directivei 1999/5/CE.
Norsk Samsung Electronicserklrer herved at dette digitalkameraet er i samsvar med de grunnleggende krav og vrige relevante krav i direktiv 1999/5/EF.
Trkiye Bu belge ile, Samsung Electronics bu dijital kamerann 1999/5/EC Ynetmeliginin temel gerekliliklerine ve ilgili hkmlerine uygun olduunu beyan eder.
slenska Hr me lsir Samsung Electronics v yr a essi stafrna myndavl s samrmi vi grunnkrfur og nnur kvi tilskipunar 1999/5/EB.
Appendixes 163
Index
A
AF-assist light Location 15 Settings 133
AF Lamp 133
AF Sound 130
Artistic Brush mode 58
Auto Backup 121
Auto Contrast Balance (ACB) Playback mode 97 Shooting mode 75
Auto Exposure Bracket (AEB) 78
A/V port 15
B
Battery Caution 143 Charging 18 Inserting 17
Beauty Shot mode 50
Blink Detection 71
Brightness Playback mode 96 Shooting mode 74
Burst modes Auto Exposure Bracket (AEB) 78 Continuous 78 Motion Capture 78
C
Camera maintenance 137
Camera specications 149
Capturing an image from video 93
Charging 18
Children mode 48
Cleaning Camera body 137 Display 137 Lens 137
Close-up Shot mode 52
Connecting to a computer Mac 105 Windows 100
Contrast Playback mode 96 Shooting mode 79
D
Date/Time Set 132
Deleting les 88
Digital Print Order Format (DPOF) 98
Digital zoom 32
Disconnecting the camera 104
Display brightness 131
Display type 28
E
Editing photos 94
Editing videos Capturing 93 Trimming 93
Enlarging 89
Error messages 135
Exposure 74
Appendixes 164
Index
F
Face Detection 70
Flash Auto 64 Fill in 65 Off 64 Red-eye 65 Red-eye Fix 65 Slow Sync 65
Focus area Center AF 69 Multi AF 69 Tracking AF 69
Formatting 133
Front display Customizing 47 Easy Self Shot 47 Turning on 31
Funny Face mode 54
G
Guide Line 130
H
Half-press shutter 35
Home screen 22
I
Icons Playback mode 84 Shooting mode 21
Image Adjustment ACB 97 Brightness Playback mode 96 Shooting mode 74
Contrast Playback mode 96 Shooting mode 79
Red-eye 97 Saturation Playback mode 96 Shooting mode 79
Sharpness 79
Image quality 62
Imprint 133
Intelligent Portrait mode 51
Intelli-studio 102
Intelli zoom 32
ISO sensitivity 66
J
Jump Shot mode 48
L
Language settings 132
Live Panorama mode 43
M
Macro 67
Magic Frame mode 53
Memory card Caution 141 Insert 17
Menu button 16
Metering Center-weighted 75 Multi 75 Spot 75
Motion Capture 78
Movie Filter mode 56
Movie mode 41
My star Cancelling 86 Ranking 85 Registering 73
O
Optical Image Stabilization (OIS) 33
Optional accessories 14
Appendixes 165
Sound settings 29
Split Shot mode 57
Start Image 130
Status lamp 16
T
Thumbnails 87
Timer Shooting mode 63 Timer lamp 15
Time settings 19
Time zone settings 19, 132
Transferring les Auto Backup 121 Email 117 Mac 105 Windows 100
Tripod mount 15
TV Link 123
Settings 132
Sharpness 79
Shooting portraits Blink Detection 71 Face Detection 70 Red-eye 65 Red-eye x 65 Smart Face Recognition 72 Smile Shot 71
Shutter button 15
Slide show 91
Smart Album 86
Smart Auto mode 38
Smart Face Recognition 72
Smart Filter Photo shooting mode 55 Playback mode 95 Video recording mode 56
Smart Movie mode 40
Smile Shot 71
R
Red-eye Playback mode 97 Shooting mode 64
Remote Viewnder 113
Reset 133
Resolution Playback mode 94 Shooting mode 61
Retouching faces Playback mode 97 Shooting mode 50
Rotating 95
S
Saturation Playback mode 96 Shooting mode 79
Scene mode 42
Service center 146
P
Photo Filter mode 55
PictBridge 106
Picture in Picture mode 45
Playback button 16
Playback mode 84
Power button 15
Power save mode 131
Printing photos 106
Program mode 39
Protecting les 88
Q
Quick view 131
Index
Appendixes 166
U
Unpacking 14
USB port 15
V
Video Playback mode 92 Shooting mode 41
Video out 131
Viewing les Animated photos 91 Panoramic photos 90 Slide show 91 Smart Album 86 Thumbnails 87 TV 99
W
Related manuals for Samsung DualView DV305 Camera User Manual
en
en
en
en
en
en
en
en
Manualsnet FAQs
If you want to find out how the DualView Samsung works, you can view and download the Samsung DualView DV305 Camera User Manual on the Manualsnet website.
Yes, we have the User Manual for Samsung DualView as well as other Samsung manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User Manual should include all the details that are needed to use a Samsung DualView. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Samsung DualView DV305 Camera User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Samsung DualView DV305 Camera User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Samsung DualView DV305 Camera User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Samsung DualView DV305 Camera User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Samsung DualView DV305 Camera User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.